//////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////
|
//// ////
|
//// ////
|
//// uart_defines.v ////
|
//// uart_defines.v ////
|
//// ////
|
//// ////
|
//// ////
|
//// ////
|
//// This file is part of the "UART 16550 compatible" project ////
|
//// This file is part of the "UART 16550 compatible" project ////
|
//// http://www.opencores.org/cores/uart16550/ ////
|
//// http://www.opencores.org/cores/uart16550/ ////
|
//// ////
|
//// ////
|
//// Documentation related to this project: ////
|
//// Documentation related to this project: ////
|
//// - http://www.opencores.org/cores/uart16550/ ////
|
//// - http://www.opencores.org/cores/uart16550/ ////
|
//// ////
|
//// ////
|
//// Projects compatibility: ////
|
//// Projects compatibility: ////
|
//// - WISHBONE ////
|
//// - WISHBONE ////
|
//// RS232 Protocol ////
|
//// RS232 Protocol ////
|
//// 16550D uart (mostly supported) ////
|
//// 16550D uart (mostly supported) ////
|
//// ////
|
//// ////
|
//// Overview (main Features): ////
|
//// Overview (main Features): ////
|
//// Defines of the Core ////
|
//// Defines of the Core ////
|
//// ////
|
//// ////
|
//// Known problems (limits): ////
|
//// Known problems (limits): ////
|
//// None ////
|
//// None ////
|
//// ////
|
//// ////
|
//// To Do: ////
|
//// To Do: ////
|
//// Nothing. ////
|
//// Nothing. ////
|
//// ////
|
//// ////
|
//// Author(s): ////
|
//// Author(s): ////
|
//// - gorban@opencores.org ////
|
//// - gorban@opencores.org ////
|
//// - Jacob Gorban ////
|
//// - Jacob Gorban ////
|
//// - Igor Mohor (igorm@opencores.org) ////
|
//// - Igor Mohor (igorm@opencores.org) ////
|
//// ////
|
//// ////
|
//// Created: 2001/05/12 ////
|
//// Created: 2001/05/12 ////
|
//// Last Updated: 2001/05/17 ////
|
//// Last Updated: 2001/05/17 ////
|
//// (See log for the revision history) ////
|
//// (See log for the revision history) ////
|
//// ////
|
//// ////
|
//// ////
|
//// ////
|
//////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////
|
//// ////
|
//// ////
|
//// Copyright (C) 2000, 2001 Authors ////
|
//// Copyright (C) 2000, 2001 Authors ////
|
//// ////
|
//// ////
|
//// This source file may be used and distributed without ////
|
//// This source file may be used and distributed without ////
|
//// restriction provided that this copyright statement is not ////
|
//// restriction provided that this copyright statement is not ////
|
//// removed from the file and that any derivative work contains ////
|
//// removed from the file and that any derivative work contains ////
|
//// the original copyright notice and the associated disclaimer. ////
|
//// the original copyright notice and the associated disclaimer. ////
|
//// ////
|
//// ////
|
//// This source file is free software; you can redistribute it ////
|
//// This source file is free software; you can redistribute it ////
|
//// and/or modify it under the terms of the GNU Lesser General ////
|
//// and/or modify it under the terms of the GNU Lesser General ////
|
//// Public License as published by the Free Software Foundation; ////
|
//// Public License as published by the Free Software Foundation; ////
|
//// either version 2.1 of the License, or (at your option) any ////
|
//// either version 2.1 of the License, or (at your option) any ////
|
//// later version. ////
|
//// later version. ////
|
//// ////
|
//// ////
|
//// This source is distributed in the hope that it will be ////
|
//// This source is distributed in the hope that it will be ////
|
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
|
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
|
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
|
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
|
//// PURPOSE. See the GNU Lesser General Public License for more ////
|
//// PURPOSE. See the GNU Lesser General Public License for more ////
|
//// details. ////
|
//// details. ////
|
//// ////
|
//// ////
|
//// You should have received a copy of the GNU Lesser General ////
|
//// You should have received a copy of the GNU Lesser General ////
|
//// Public License along with this source; if not, download it ////
|
//// Public License along with this source; if not, download it ////
|
//// from http://www.opencores.org/lgpl.shtml ////
|
//// from http://www.opencores.org/lgpl.shtml ////
|
//// ////
|
//// ////
|
//////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////
|
//
|
//
|
// CVS Revision History
|
// CVS Revision History
|
//
|
//
|
// $Log: not supported by cvs2svn $
|
// $Log: not supported by cvs2svn $
|
// Revision 1.13 2003/06/11 16:37:47 gorban
|
// Revision 1.13 2003/06/11 16:37:47 gorban
|
// This fixes errors in some cases when data is being read and put to the FIFO at the same time. Patch is submitted by Scott Furman. Update is very recommended.
|
// This fixes errors in some cases when data is being read and put to the FIFO at the same time. Patch is submitted by Scott Furman. Update is very recommended.
|
//
|
//
|
// Revision 1.12 2002/07/22 23:02:23 gorban
|
// Revision 1.12 2002/07/22 23:02:23 gorban
|
// Bug Fixes:
|
// Bug Fixes:
|
// * Possible loss of sync and bad reception of stop bit on slow baud rates fixed.
|
// * Possible loss of sync and bad reception of stop bit on slow baud rates fixed.
|
// Problem reported by Kenny.Tung.
|
// Problem reported by Kenny.Tung.
|
// * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers.
|
// * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers.
|
//
|
//
|
// Improvements:
|
// Improvements:
|
// * Made FIFO's as general inferrable memory where possible.
|
// * Made FIFO's as general inferrable memory where possible.
|
// So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx).
|
// So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx).
|
// This saves about 1/3 of the Slice count and reduces P&R and synthesis times.
|
// This saves about 1/3 of the Slice count and reduces P&R and synthesis times.
|
//
|
//
|
// * Added optional baudrate output (baud_o).
|
// * Added optional baudrate output (baud_o).
|
// This is identical to BAUDOUT* signal on 16550 chip.
|
// This is identical to BAUDOUT* signal on 16550 chip.
|
// It outputs 16xbit_clock_rate - the divided clock.
|
// It outputs 16xbit_clock_rate - the divided clock.
|
// It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use.
|
// It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use.
|
//
|
//
|
// Revision 1.10 2001/12/11 08:55:40 mohor
|
// Revision 1.10 2001/12/11 08:55:40 mohor
|
// Scratch register define added.
|
// Scratch register define added.
|
//
|
//
|
// Revision 1.9 2001/12/03 21:44:29 gorban
|
// Revision 1.9 2001/12/03 21:44:29 gorban
|
// Updated specification documentation.
|
// Updated specification documentation.
|
// Added full 32-bit data bus interface, now as default.
|
// Added full 32-bit data bus interface, now as default.
|
// Address is 5-bit wide in 32-bit data bus mode.
|
// Address is 5-bit wide in 32-bit data bus mode.
|
// Added wb_sel_i input to the core. It's used in the 32-bit mode.
|
// Added wb_sel_i input to the core. It's used in the 32-bit mode.
|
// Added debug interface with two 32-bit read-only registers in 32-bit mode.
|
// Added debug interface with two 32-bit read-only registers in 32-bit mode.
|
// Bits 5 and 6 of LSR are now only cleared on TX FIFO write.
|
// Bits 5 and 6 of LSR are now only cleared on TX FIFO write.
|
// My small test bench is modified to work with 32-bit mode.
|
// My small test bench is modified to work with 32-bit mode.
|
//
|
//
|
// Revision 1.8 2001/11/26 21:38:54 gorban
|
// Revision 1.8 2001/11/26 21:38:54 gorban
|
// Lots of fixes:
|
// Lots of fixes:
|
// Break condition wasn't handled correctly at all.
|
// Break condition wasn't handled correctly at all.
|
// LSR bits could lose their values.
|
// LSR bits could lose their values.
|
// LSR value after reset was wrong.
|
// LSR value after reset was wrong.
|
// Timing of THRE interrupt signal corrected.
|
// Timing of THRE interrupt signal corrected.
|
// LSR bit 0 timing corrected.
|
// LSR bit 0 timing corrected.
|
//
|
//
|
// Revision 1.7 2001/08/24 21:01:12 mohor
|
// Revision 1.7 2001/08/24 21:01:12 mohor
|
// Things connected to parity changed.
|
// Things connected to parity changed.
|
// Clock devider changed.
|
// Clock devider changed.
|
//
|
//
|
// Revision 1.6 2001/08/23 16:05:05 mohor
|
// Revision 1.6 2001/08/23 16:05:05 mohor
|
// Stop bit bug fixed.
|
// Stop bit bug fixed.
|
// Parity bug fixed.
|
// Parity bug fixed.
|
// WISHBONE read cycle bug fixed,
|
// WISHBONE read cycle bug fixed,
|
// OE indicator (Overrun Error) bug fixed.
|
// OE indicator (Overrun Error) bug fixed.
|
// PE indicator (Parity Error) bug fixed.
|
// PE indicator (Parity Error) bug fixed.
|
// Register read bug fixed.
|
// Register read bug fixed.
|
//
|
//
|
// Revision 1.5 2001/05/31 20:08:01 gorban
|
// Revision 1.5 2001/05/31 20:08:01 gorban
|
// FIFO changes and other corrections.
|
// FIFO changes and other corrections.
|
//
|
//
|
// Revision 1.4 2001/05/21 19:12:02 gorban
|
// Revision 1.4 2001/05/21 19:12:02 gorban
|
// Corrected some Linter messages.
|
// Corrected some Linter messages.
|
//
|
//
|
// Revision 1.3 2001/05/17 18:34:18 gorban
|
// Revision 1.3 2001/05/17 18:34:18 gorban
|
// First 'stable' release. Should be sythesizable now. Also added new header.
|
// First 'stable' release. Should be sythesizable now. Also added new header.
|
//
|
//
|
// Revision 1.0 2001-05-17 21:27:11+02 jacob
|
// Revision 1.0 2001-05-17 21:27:11+02 jacob
|
// Initial revision
|
// Initial revision
|
//
|
//
|
//
|
//
|
|
|
// remove comments to restore to use the new version with 8 data bit interface
|
// remove comments to restore to use the new version with 8 data bit interface
|
// in 32bit-bus mode, the wb_sel_i signal is used to put data in correct place
|
// in 32bit-bus mode, the wb_sel_i signal is used to put data in correct place
|
// also, in 8-bit version there'll be no debugging features included
|
// also, in 8-bit version there'll be no debugging features included
|
// CAUTION: doesn't work with current version of OR1200
|
// CAUTION: doesn't work with current version of OR1200
|
`define DATA_BUS_WIDTH_8
|
`define DATA_BUS_WIDTH_8
|
|
|
`ifdef DATA_BUS_WIDTH_8
|
`ifdef DATA_BUS_WIDTH_8
|
`define UART_ADDR_WIDTH 3
|
`define UART_ADDR_WIDTH 3
|
`define UART_DATA_WIDTH 8
|
`define UART_DATA_WIDTH 8
|
`else
|
`else
|
`define UART_ADDR_WIDTH 5
|
`define UART_ADDR_WIDTH 5
|
`define UART_DATA_WIDTH 32
|
`define UART_DATA_WIDTH 32
|
`endif
|
`endif
|
|
|
// Uncomment this if you want your UART to have
|
// Uncomment this if you want your UART to have
|
// 16xBaudrate output port.
|
// 16xBaudrate output port.
|
// If defined, the enable signal will be used to drive baudrate_o signal
|
// If defined, the enable signal will be used to drive baudrate_o signal
|
// It's frequency is 16xbaudrate
|
// It's frequency is 16xbaudrate
|
|
|
// `define UART_HAS_BAUDRATE_OUTPUT
|
// `define UART_HAS_BAUDRATE_OUTPUT
|
|
|
// Register addresses
|
// Register addresses
|
`define UART_REG_RB `UART_ADDR_WIDTH'd0 // receiver buffer
|
`define UART_REG_RB `UART_ADDR_WIDTH'd0 // receiver buffer
|
`define UART_REG_TR `UART_ADDR_WIDTH'd0 // transmitter
|
`define UART_REG_TR `UART_ADDR_WIDTH'd0 // transmitter
|
`define UART_REG_IE `UART_ADDR_WIDTH'd1 // Interrupt enable
|
`define UART_REG_IE `UART_ADDR_WIDTH'd1 // Interrupt enable
|
`define UART_REG_II `UART_ADDR_WIDTH'd2 // Interrupt identification
|
`define UART_REG_II `UART_ADDR_WIDTH'd2 // Interrupt identification
|
`define UART_REG_FC `UART_ADDR_WIDTH'd2 // FIFO control
|
`define UART_REG_FC `UART_ADDR_WIDTH'd2 // FIFO control
|
`define UART_REG_LC `UART_ADDR_WIDTH'd3 // Line Control
|
`define UART_REG_LC `UART_ADDR_WIDTH'd3 // Line Control
|
`define UART_REG_MC `UART_ADDR_WIDTH'd4 // Modem control
|
`define UART_REG_MC `UART_ADDR_WIDTH'd4 // Modem control
|
`define UART_REG_LS `UART_ADDR_WIDTH'd5 // Line status
|
`define UART_REG_LS `UART_ADDR_WIDTH'd5 // Line status
|
`define UART_REG_MS `UART_ADDR_WIDTH'd6 // Modem status
|
`define UART_REG_MS `UART_ADDR_WIDTH'd6 // Modem status
|
`define UART_REG_SR `UART_ADDR_WIDTH'd7 // Scratch register
|
`define UART_REG_SR `UART_ADDR_WIDTH'd7 // Scratch register
|
`define UART_REG_DL1 `UART_ADDR_WIDTH'd0 // Divisor latch bytes (1-2)
|
`define UART_REG_DL1 `UART_ADDR_WIDTH'd0 // Divisor latch bytes (1-2)
|
`define UART_REG_DL2 `UART_ADDR_WIDTH'd1
|
`define UART_REG_DL2 `UART_ADDR_WIDTH'd1
|
|
|
// Interrupt Enable register bits
|
// Interrupt Enable register bits
|
`define UART_IE_RDA 0 // Received Data available interrupt
|
`define UART_IE_RDA 0 // Received Data available interrupt
|
`define UART_IE_THRE 1 // Transmitter Holding Register empty interrupt
|
`define UART_IE_THRE 1 // Transmitter Holding Register empty interrupt
|
`define UART_IE_RLS 2 // Receiver Line Status Interrupt
|
`define UART_IE_RLS 2 // Receiver Line Status Interrupt
|
`define UART_IE_MS 3 // Modem Status Interrupt
|
`define UART_IE_MS 3 // Modem Status Interrupt
|
|
|
// Interrupt Identification register bits
|
// Interrupt Identification register bits
|
`define UART_II_IP 0 // Interrupt pending when 0
|
`define UART_II_IP 0 // Interrupt pending when 0
|
`define UART_II_II 3:1 // Interrupt identification
|
`define UART_II_II 3:1 // Interrupt identification
|
|
|
// Interrupt identification values for bits 3:1
|
// Interrupt identification values for bits 3:1
|
`define UART_II_RLS 3'b011 // Receiver Line Status
|
`define UART_II_RLS 3'b011 // Receiver Line Status
|
`define UART_II_RDA 3'b010 // Receiver Data available
|
`define UART_II_RDA 3'b010 // Receiver Data available
|
`define UART_II_TI 3'b110 // Timeout Indication
|
`define UART_II_TI 3'b110 // Timeout Indication
|
`define UART_II_THRE 3'b001 // Transmitter Holding Register empty
|
`define UART_II_THRE 3'b001 // Transmitter Holding Register empty
|
`define UART_II_MS 3'b000 // Modem Status
|
`define UART_II_MS 3'b000 // Modem Status
|
|
|
// FIFO Control Register bits
|
// FIFO Control Register bits
|
`define UART_FC_TL 1:0 // Trigger level
|
`define UART_FC_TL 1:0 // Trigger level
|
|
|
// FIFO trigger level values
|
// FIFO trigger level values
|
`define UART_FC_1 2'b00
|
`define UART_FC_1 2'b00
|
`define UART_FC_4 2'b01
|
`define UART_FC_4 2'b01
|
`define UART_FC_8 2'b10
|
`define UART_FC_8 2'b10
|
`define UART_FC_14 2'b11
|
`define UART_FC_14 2'b11
|
|
|
// Line Control register bits
|
// Line Control register bits
|
`define UART_LC_BITS 1:0 // bits in character
|
`define UART_LC_BITS 1:0 // bits in character
|
`define UART_LC_SB 2 // stop bits
|
`define UART_LC_SB 2 // stop bits
|
`define UART_LC_PE 3 // parity enable
|
`define UART_LC_PE 3 // parity enable
|
`define UART_LC_EP 4 // even parity
|
`define UART_LC_EP 4 // even parity
|
`define UART_LC_SP 5 // stick parity
|
`define UART_LC_SP 5 // stick parity
|
`define UART_LC_BC 6 // Break control
|
`define UART_LC_BC 6 // Break control
|
`define UART_LC_DL 7 // Divisor Latch access bit
|
`define UART_LC_DL 7 // Divisor Latch access bit
|
|
|
// Modem Control register bits
|
// Modem Control register bits
|
`define UART_MC_DTR 0
|
`define UART_MC_DTR 0
|
`define UART_MC_RTS 1
|
`define UART_MC_RTS 1
|
`define UART_MC_OUT1 2
|
`define UART_MC_OUT1 2
|
`define UART_MC_OUT2 3
|
`define UART_MC_OUT2 3
|
`define UART_MC_LB 4 // Loopback mode
|
`define UART_MC_LB 4 // Loopback mode
|
|
|
// Line Status Register bits
|
// Line Status Register bits
|
`define UART_LS_DR 0 // Data ready
|
`define UART_LS_DR 0 // Data ready
|
`define UART_LS_OE 1 // Overrun Error
|
`define UART_LS_OE 1 // Overrun Error
|
`define UART_LS_PE 2 // Parity Error
|
`define UART_LS_PE 2 // Parity Error
|
`define UART_LS_FE 3 // Framing Error
|
`define UART_LS_FE 3 // Framing Error
|
`define UART_LS_BI 4 // Break interrupt
|
`define UART_LS_BI 4 // Break interrupt
|
`define UART_LS_TFE 5 // Transmit FIFO is empty
|
`define UART_LS_TFE 5 // Transmit FIFO is empty
|
`define UART_LS_TE 6 // Transmitter Empty indicator
|
`define UART_LS_TE 6 // Transmitter Empty indicator
|
`define UART_LS_EI 7 // Error indicator
|
`define UART_LS_EI 7 // Error indicator
|
|
|
// Modem Status Register bits
|
// Modem Status Register bits
|
`define UART_MS_DCTS 0 // Delta signals
|
`define UART_MS_DCTS 0 // Delta signals
|
`define UART_MS_DDSR 1
|
`define UART_MS_DDSR 1
|
`define UART_MS_TERI 2
|
`define UART_MS_TERI 2
|
`define UART_MS_DDCD 3
|
`define UART_MS_DDCD 3
|
`define UART_MS_CCTS 4 // Complement signals
|
`define UART_MS_CCTS 4 // Complement signals
|
`define UART_MS_CDSR 5
|
`define UART_MS_CDSR 5
|
`define UART_MS_CRI 6
|
`define UART_MS_CRI 6
|
`define UART_MS_CDCD 7
|
`define UART_MS_CDCD 7
|
|
|
// FIFO parameter defines
|
// FIFO parameter defines
|
|
|
`define UART_FIFO_WIDTH 8
|
`define UART_FIFO_WIDTH 8
|
`define UART_FIFO_DEPTH 16
|
`define UART_FIFO_DEPTH 16
|
`define UART_FIFO_POINTER_W 4
|
`define UART_FIFO_POINTER_W 4
|
`define UART_FIFO_COUNTER_W 5
|
`define UART_FIFO_COUNTER_W 5
|
// receiver fifo has width 11 because it has break, parity and framing error bits
|
// receiver fifo has width 11 because it has break, parity and framing error bits
|
`define UART_FIFO_REC_WIDTH 11
|
`define UART_FIFO_REC_WIDTH 11
|
|
|
|
|
`define VERBOSE_WB 0 // All activity on the WISHBONE is recorded
|
`define VERBOSE_WB 0 // All activity on the WISHBONE is recorded
|
`define VERBOSE_LINE_STATUS 0 // Details about the lsr (line status register)
|
`define VERBOSE_LINE_STATUS 0 // Details about the lsr (line status register)
|
`define FAST_TEST 1 // 64/1024 packets are sent
|
`define FAST_TEST 1 // 64/1024 packets are sent
|
|
|
// Defines hard baud prescaler register - uncomment to enable
|
// Defines hard baud prescaler register - uncomment to enable
|
//`define PRESCALER_PRESET_HARD
|
`define PRESCALER_PRESET_HARD
|
// 115200 baud preset values
|
// 115200 baud preset values
|
// 20MHz: prescaler 10.8 (11, rounded up)
|
// 20MHz: prescaler 10.8 (11, rounded up)
|
|
//`define PRESCALER_HIGH_PRESET 8'd0
|
|
//`define PRESCALER_LOW_PRESET 8'd11
|
|
// 50MHz: prescaler 27.1
|
`define PRESCALER_HIGH_PRESET 8'd0
|
`define PRESCALER_HIGH_PRESET 8'd0
|
`define PRESCALER_LOW_PRESET 8'd11
|
`define PRESCALER_LOW_PRESET 8'd27
|
|
|
No newline at end of file
|
No newline at end of file
|
