#
|
#
|
# Config file for the PowerPC 604 based mvme2307
|
# Config file for the PowerPC 604 based mvme2307
|
#
|
#
|
# $Id: mvme2307.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
|
# $Id: mvme2307.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
|
#
|
#
|
|
|
include $(RTEMS_ROOT)/make/custom/default.cfg
|
include $(RTEMS_ROOT)/make/custom/default.cfg
|
|
|
RTEMS_CPU=powerpc
|
RTEMS_CPU=powerpc
|
RTEMS_CPU_MODEL=mpc604
|
RTEMS_CPU_MODEL=mpc604
|
RTEMS_PPC_EXCEPTION_PROCESSING_MODEL=new
|
RTEMS_PPC_EXCEPTION_PROCESSING_MODEL=new
|
|
|
# This is the actual bsp directory used during the build process.
|
# This is the actual bsp directory used during the build process.
|
RTEMS_BSP_FAMILY=motorola_powerpc
|
RTEMS_BSP_FAMILY=motorola_powerpc
|
|
|
# This section makes the target dependent options file.
|
# This section makes the target dependent options file.
|
|
|
# NDEBUG (C library)
|
# NDEBUG (C library)
|
# if defined asserts do not generate code. This is commonly used
|
# if defined asserts do not generate code. This is commonly used
|
# as a command line option.
|
# as a command line option.
|
#
|
#
|
# RTEMS_TEST_NO_PAUSE (RTEMS tests)
|
# RTEMS_TEST_NO_PAUSE (RTEMS tests)
|
# do not pause between screens of output in the rtems tests
|
# do not pause between screens of output in the rtems tests
|
#
|
#
|
# RTEMS_DEBUG (RTEMS)
|
# RTEMS_DEBUG (RTEMS)
|
# If defined, debug checks in RTEMS and support library code are enabled.
|
# If defined, debug checks in RTEMS and support library code are enabled.
|
#
|
#
|
# CONSOLE_USE_POLLED (mvme2307_bsp)
|
# CONSOLE_USE_POLLED (mvme2307_bsp)
|
# CONSOLE_USE_INTERRUPTS (mvme2307_bsp)
|
# CONSOLE_USE_INTERRUPTS (mvme2307_bsp)
|
# The mvme2307 console driver has the structure to operate in either
|
# The mvme2307 console driver has the structure to operate in either
|
# polled or interrupt mode. However both modes only trap to the
|
# polled or interrupt mode. However both modes only trap to the
|
# monitor currently.
|
# monitor currently.
|
#
|
#
|
# PPC_VECTOR_FILE_BASE (PowerPC)
|
# PPC_VECTOR_FILE_BASE (PowerPC)
|
# This defines the base address of the exception table.
|
# This defines the base address of the exception table.
|
# NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100
|
# NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100
|
#
|
#
|
# PPC_USE_SPRG (RTEMS PowerPC port)
|
# PPC_USE_SPRG (RTEMS PowerPC port)
|
# If defined, then the PowerPC specific code in RTEMS will use some
|
# If defined, then the PowerPC specific code in RTEMS will use some
|
# of the special purpose registers to slightly optimize interrupt
|
# of the special purpose registers to slightly optimize interrupt
|
# response time. The use of these registers can conflict with
|
# response time. The use of these registers can conflict with
|
# other tools like debuggers.
|
# other tools like debuggers.
|
#
|
#
|
|
|
define make-target-options
|
define make-target-options
|
@echo "/* #define NDEBUG 1 */ " >>$@
|
@echo "/* #define NDEBUG 1 */ " >>$@
|
@echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@
|
@echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@
|
@echo "/* #define RTEMS_DEBUG 1 */" >>$@
|
@echo "/* #define RTEMS_DEBUG 1 */" >>$@
|
@echo "#define PPCN_60X_USE_DINK 0" >>$@
|
@echo "#define PPCN_60X_USE_DINK 0" >>$@
|
@echo "#define PPCN_60X_USE_NONE 1" >>$@
|
@echo "#define PPCN_60X_USE_NONE 1" >>$@
|
@echo "#define PPC_USE_DATA_CACHE 1" >>$@
|
@echo "#define PPC_USE_DATA_CACHE 1" >>$@
|
@echo "#define PPC_VECTOR_FILE_BASE 0x0100" >>$@
|
@echo "#define PPC_VECTOR_FILE_BASE 0x0100" >>$@
|
@echo "#define PPC_USE_SPRG 1"
|
@echo "#define PPC_USE_SPRG 1"
|
endef
|
endef
|
|
|
# This contains the compiler options necessary to select the CPU model
|
# This contains the compiler options necessary to select the CPU model
|
# and (hopefully) optimize for it.
|
# and (hopefully) optimize for it.
|
#
|
#
|
CPU_CFLAGS = -mcpu=604 -mmultiple -mstring -mstrict-align
|
CPU_CFLAGS = -mcpu=604 -mmultiple -mstring -mstrict-align
|
|
|
# optimize flag: typically -0, could use -O4 or -fast
|
# optimize flag: typically -0, could use -O4 or -fast
|
# -O4 is ok for RTEMS
|
# -O4 is ok for RTEMS
|
# NOTE: some level of -O may be actually required by inline assembler
|
# NOTE: some level of -O may be actually required by inline assembler
|
#CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
|
#CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
|
CFLAGS_OPTIMIZE_V = -O4
|
CFLAGS_OPTIMIZE_V = -O4
|
|
|
# debug flags: typically none, but at least -O1 is required due to this
|
# debug flags: typically none, but at least -O1 is required due to this
|
# BSP using inlined code
|
# BSP using inlined code
|
CFLAGS_DEBUG_V = -O1
|
CFLAGS_DEBUG_V = -O1
|
|
|
# profile flags: typically none, but at least -O1 is required due to this
|
# profile flags: typically none, but at least -O1 is required due to this
|
# BSP using inlined code
|
# BSP using inlined code
|
CFLAGS_PROFILE_V = -O1
|
CFLAGS_PROFILE_V = -O1
|
|
|
# The following is a linkcmds file which will work without using the
|
# The following is a linkcmds file which will work without using the
|
# -specs system in gcc 2.8.
|
# -specs system in gcc 2.8.
|
# $(LD) $(XLDFLAGS) -T $(LINKCMDS) \
|
# $(LD) $(XLDFLAGS) -T $(LINKCMDS) \
|
# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
|
# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
|
# $(LD) $(XLDFLAGS) -Ttext 0x20000 \
|
# $(LD) $(XLDFLAGS) -Ttext 0x20000 \
|
# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
|
# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
|
|
|
# $(CC) -mmvme -mrtems -nostartfiles -mcpu=603 \
|
# $(CC) -mmvme -mrtems -nostartfiles -mcpu=603 \
|
# -o $(basename $@).exe -L $(PROJECT_RELEASE)/lib \
|
# -o $(basename $@).exe -L $(PROJECT_RELEASE)/lib \
|
# $(START_FILE) $(LINK_OBJS) \
|
# $(START_FILE) $(LINK_OBJS) \
|
# $(LD_LIBS) \
|
# $(LD_LIBS) \
|
# -Wl,-\( -Wl,-lc -Wl,-lrtemsall -Wl,-lgcc -Wl,-\)
|
# -Wl,-\( -Wl,-lc -Wl,-lrtemsall -Wl,-lgcc -Wl,-\)
|
define make-exe
|
define make-exe
|
$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $@ $(LINK_OBJS) $(LINK_LIBS)
|
$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $@ $(LINK_OBJS) $(LINK_LIBS)
|
$(NM) -g -n $@ > $(basename $@).num
|
$(NM) -g -n $@ > $(basename $@).num
|
$(SIZE) $@
|
$(SIZE) $@
|
# The following commands make a bootable image but will not work outside
|
# The following commands make a bootable image but will not work outside
|
# the build tree.
|
# the build tree.
|
# test -d ${PROJECT_RELEASE}/bin || mkdir ${PROJECT_RELEASE}/bin
|
# test -d ${PROJECT_RELEASE}/bin || mkdir ${PROJECT_RELEASE}/bin
|
# $(CP) $@ $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader/$(ARCH); \
|
# $(CP) $@ $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader/$(ARCH); \
|
# ( cd $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader; \
|
# ( cd $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader; \
|
# $(MAKE) bootloader BINARY_LOADED=$@; )
|
# $(MAKE) bootloader BINARY_LOADED=$@; )
|
# f=`basename $@ .exe`; \
|
# f=`basename $@ .exe`; \
|
# cp $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader/bootloader \
|
# cp $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader/bootloader \
|
# ${PROJECT_RELEASE}/bin/$${f}$(LIB_VARIANT).exe \
|
# ${PROJECT_RELEASE}/bin/$${f}$(LIB_VARIANT).exe \
|
# && chmod 755 \
|
# && chmod 755 \
|
# ${PROJECT_RELEASE}/bin/$${f}$(LIB_VARIANT).exe
|
# ${PROJECT_RELEASE}/bin/$${f}$(LIB_VARIANT).exe
|
endef
|
endef
|
|
|
|
|
# Miscellaneous additions go here
|
# Miscellaneous additions go here
|
|
|
# No start file
|
# No start file
|
START_BASE=
|
START_BASE=
|
|
|