/* 16450.c -- Simulation of 8250/16450 serial UART
|
/* 16450.c -- Simulation of 8250/16450 serial UART
|
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
|
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
|
|
|
This file is part of OpenRISC 1000 Architectural Simulator.
|
This file is part of OpenRISC 1000 Architectural Simulator.
|
|
|
This program is free software; you can redistribute it and/or modify
|
This program is free software; you can redistribute it and/or modify
|
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
the Free Software Foundation; either version 2 of the License, or
|
the Free Software Foundation; either version 2 of the License, or
|
(at your option) any later version.
|
(at your option) any later version.
|
|
|
This program is distributed in the hope that it will be useful,
|
This program is distributed in the hope that it will be useful,
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
GNU General Public License for more details.
|
GNU General Public License for more details.
|
|
|
You should have received a copy of the GNU General Public License
|
You should have received a copy of the GNU General Public License
|
along with this program; if not, write to the Free Software
|
along with this program; if not, write to the Free Software
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
|
|
|
/* This is functional simulation of 8250/16450 UARTs. Since we RX/TX data
|
/* This is functional simulation of 8250/16450 UARTs. Since we RX/TX data
|
via file streams, we can't simulate modem control lines coming from the
|
via file streams, we can't simulate modem control lines coming from the
|
DCE and similar details of communication with the DCE.
|
DCE and similar details of communication with the DCE.
|
|
|
This simulated UART device is intended for basic UART device driver
|
This simulated UART device is intended for basic UART device driver
|
verification. From device driver perspective this device looks like a
|
verification. From device driver perspective this device looks like a
|
regular UART but never reports any modem control lines changes (the
|
regular UART but never reports any modem control lines changes (the
|
only DCE responses are incoming characters from the file stream).
|
only DCE responses are incoming characters from the file stream).
|
*/
|
*/
|
|
|
#include <stdlib.h>
|
#include <stdlib.h>
|
#include <stdio.h>
|
#include <stdio.h>
|
#include <string.h>
|
#include <string.h>
|
|
|
#include "config.h"
|
#include "config.h"
|
|
|
#ifdef HAVE_INTTYPES_H
|
#ifdef HAVE_INTTYPES_H
|
#include <inttypes.h>
|
#include <inttypes.h>
|
#endif
|
#endif
|
|
|
#include "port.h"
|
#include "port.h"
|
#include "arch.h"
|
#include "arch.h"
|
#include "abstract.h"
|
#include "abstract.h"
|
#include "16450.h"
|
#include "16450.h"
|
#include "sim-config.h"
|
#include "sim-config.h"
|
#include "pic.h"
|
#include "pic.h"
|
#include "vapi.h"
|
#include "vapi.h"
|
#include "sched.h"
|
#include "sched.h"
|
#include "channel.h"
|
#include "channel.h"
|
#include "debug.h"
|
#include "debug.h"
|
|
|
DEFAULT_DEBUG_CHANNEL(uart);
|
DEFAULT_DEBUG_CHANNEL(uart);
|
|
|
#define MIN(a,b) ((a) < (b) ? (a) : (b))
|
#define MIN(a,b) ((a) < (b) ? (a) : (b))
|
|
|
void uart_recv_break(void *dat);
|
void uart_recv_break(void *dat);
|
void uart_recv_char(void *dat);
|
void uart_recv_char(void *dat);
|
void uart_check_vapi(void *dat);
|
void uart_check_vapi(void *dat);
|
void uart_check_char(void *dat);
|
void uart_check_char(void *dat);
|
static void uart_sched_recv_check(struct dev_16450 *uart);
|
static void uart_sched_recv_check(struct dev_16450 *uart);
|
static void uart_vapi_cmd(void *dat);
|
static void uart_vapi_cmd(void *dat);
|
static void uart_clear_int(struct dev_16450 *uart, int intr);
|
static void uart_clear_int(struct dev_16450 *uart, int intr);
|
void uart_tx_send(void *dat);
|
void uart_tx_send(void *dat);
|
|
|
/* Number of clock cycles (one clock cycle is when UART_CLOCK_DIVIDER simulator
|
/* Number of clock cycles (one clock cycle is when UART_CLOCK_DIVIDER simulator
|
* cycles have elapsed) before a single character is transmitted or received. */
|
* cycles have elapsed) before a single character is transmitted or received. */
|
static unsigned long char_clks(int dll, int dlh, int lcr)
|
static unsigned long char_clks(int dll, int dlh, int lcr)
|
{
|
{
|
unsigned int bauds_per_char = 2;
|
unsigned int bauds_per_char = 2;
|
unsigned long char_clks = ((dlh << 8) + dll);
|
unsigned long char_clks = ((dlh << 8) + dll);
|
|
|
if (lcr & UART_LCR_PARITY)
|
if (lcr & UART_LCR_PARITY)
|
bauds_per_char += 2;
|
bauds_per_char += 2;
|
|
|
/* stop bits 1 or two */
|
/* stop bits 1 or two */
|
if (lcr & UART_LCR_STOP)
|
if (lcr & UART_LCR_STOP)
|
bauds_per_char += 4;
|
bauds_per_char += 4;
|
else
|
else
|
if ((lcr & 0x3) != 0)
|
if ((lcr & 0x3) != 0)
|
bauds_per_char += 2;
|
bauds_per_char += 2;
|
else
|
else
|
bauds_per_char += 3;
|
bauds_per_char += 3;
|
|
|
bauds_per_char += 10 + ((lcr & 0x3) << 1);
|
bauds_per_char += 10 + ((lcr & 0x3) << 1);
|
|
|
return (char_clks * bauds_per_char) >> 1;
|
return (char_clks * bauds_per_char) >> 1;
|
}
|
}
|
|
|
/*---------------------------------------------------[ Interrupt handling ]---*/
|
/*---------------------------------------------------[ Interrupt handling ]---*/
|
/* Signals the specified interrupt. If a higher priority interrupt is already
|
/* Signals the specified interrupt. If a higher priority interrupt is already
|
* pending, do nothing */
|
* pending, do nothing */
|
static void uart_int_msi(void *dat)
|
static void uart_int_msi(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
uart->istat.ints |= 1 << UART_IIR_MSI;
|
uart->istat.ints |= 1 << UART_IIR_MSI;
|
|
|
if(!(uart->regs.ier & UART_IER_MSI))
|
if(!(uart->regs.ier & UART_IER_MSI))
|
return;
|
return;
|
|
|
if((uart->regs.iir & UART_IIR_NO_INT) || (uart->regs.iir == UART_IIR_MSI)) {
|
if((uart->regs.iir & UART_IIR_NO_INT) || (uart->regs.iir == UART_IIR_MSI)) {
|
TRACE("Raiseing modem status interrupt\n");
|
TRACE("Raiseing modem status interrupt\n");
|
uart_clear_int(uart, uart->regs.iir);
|
|
|
|
|
if((uart->regs.iir != UART_IIR_MSI) && (uart->regs.iir != UART_IIR_NO_INT)) {
|
|
uart_clear_int(uart, uart->regs.iir);
|
|
uart->regs.iir = UART_IIR_MSI;
|
|
} else {
|
uart->regs.iir = UART_IIR_MSI;
|
uart->regs.iir = UART_IIR_MSI;
|
SCHED_ADD(uart_int_msi, dat, UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_int_msi, dat, UART_CLOCK_DIVIDER);
|
report_interrupt(uart->irq);
|
report_interrupt(uart->irq);
|
}
|
}
|
}
|
}
|
|
}
|
|
|
static void uart_int_thri(void *dat)
|
static void uart_int_thri(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
uart->istat.ints |= 1 << UART_IIR_THRI;
|
uart->istat.ints |= 1 << UART_IIR_THRI;
|
|
|
if(!(uart->regs.ier & UART_IER_THRI))
|
if(!(uart->regs.ier & UART_IER_THRI))
|
return;
|
return;
|
|
|
if((uart->regs.iir & UART_IIR_NO_INT) || (uart->regs.iir == UART_IIR_MSI) ||
|
if((uart->regs.iir & UART_IIR_NO_INT) || (uart->regs.iir == UART_IIR_MSI) ||
|
(uart->regs.iir == UART_IIR_THRI)) {
|
(uart->regs.iir == UART_IIR_THRI)) {
|
TRACE("Raiseing transmitter holding register interrupt\n");
|
TRACE("Raiseing transmitter holding register interrupt\n");
|
uart_clear_int(uart, uart->regs.iir);
|
|
|
|
|
if((uart->regs.iir != UART_IIR_THRI) && (uart->regs.iir != UART_IIR_NO_INT)) {
|
|
uart_clear_int(uart, uart->regs.iir);
|
|
uart->regs.iir = UART_IIR_THRI;
|
|
} else {
|
uart->regs.iir = UART_IIR_THRI;
|
uart->regs.iir = UART_IIR_THRI;
|
SCHED_ADD(uart_int_thri, dat, UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_int_thri, dat, UART_CLOCK_DIVIDER);
|
report_interrupt(uart->irq);
|
report_interrupt(uart->irq);
|
}
|
}
|
}
|
}
|
|
}
|
|
|
static void uart_int_cti(void *dat)
|
static void uart_int_cti(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
uart->istat.ints |= 1 << UART_IIR_CTI;
|
uart->istat.ints |= 1 << UART_IIR_CTI;
|
|
|
if(!(uart->regs.ier & UART_IER_RDI))
|
if(!(uart->regs.ier & UART_IER_RDI))
|
return;
|
return;
|
|
|
if((uart->regs.iir != UART_IIR_RLSI) && (uart->regs.iir != UART_IIR_RDI)) {
|
if((uart->regs.iir != UART_IIR_RLSI) && (uart->regs.iir != UART_IIR_RDI)) {
|
TRACE("Raiseing character timeout interrupt\n");
|
TRACE("Raiseing character timeout interrupt\n");
|
uart_clear_int(uart, uart->regs.iir);
|
|
|
|
|
if((uart->regs.iir != UART_IIR_CTI) && (uart->regs.iir != UART_IIR_NO_INT)) {
|
|
uart_clear_int(uart, uart->regs.iir);
|
|
uart->regs.iir = UART_IIR_CTI;
|
|
} else {
|
uart->regs.iir = UART_IIR_CTI;
|
uart->regs.iir = UART_IIR_CTI;
|
SCHED_ADD(uart_int_cti, dat, UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_int_cti, dat, UART_CLOCK_DIVIDER);
|
report_interrupt(uart->irq);
|
report_interrupt(uart->irq);
|
}
|
}
|
}
|
}
|
|
}
|
|
|
static void uart_int_rdi(void *dat)
|
static void uart_int_rdi(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
uart->istat.ints |= 1 << UART_IIR_RDI;
|
uart->istat.ints |= 1 << UART_IIR_RDI;
|
|
|
if(!(uart->regs.ier & UART_IER_RDI))
|
if(!(uart->regs.ier & UART_IER_RDI))
|
return;
|
return;
|
|
|
if(uart->regs.iir != UART_IIR_RLSI) {
|
if(uart->regs.iir != UART_IIR_RLSI) {
|
TRACE("Raiseing receiver data interrupt\n");
|
TRACE("Raiseing receiver data interrupt\n");
|
uart_clear_int(uart, uart->regs.iir);
|
|
|
|
|
if((uart->regs.iir != UART_IIR_RDI) && (uart->regs.iir != UART_IIR_NO_INT)) {
|
|
uart_clear_int(uart, uart->regs.iir);
|
|
uart->regs.iir = UART_IIR_RDI;
|
|
} else {
|
uart->regs.iir = UART_IIR_RDI;
|
uart->regs.iir = UART_IIR_RDI;
|
SCHED_ADD(uart_int_rdi, dat, UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_int_rdi, dat, UART_CLOCK_DIVIDER);
|
report_interrupt(uart->irq);
|
report_interrupt(uart->irq);
|
}
|
}
|
}
|
}
|
|
}
|
|
|
static void uart_int_rlsi(void *dat)
|
static void uart_int_rlsi(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
uart->istat.ints |= 1 << UART_IIR_RLSI;
|
uart->istat.ints |= 1 << UART_IIR_RLSI;
|
|
|
if(!(uart->regs.ier & UART_IER_RLSI))
|
if(!(uart->regs.ier & UART_IER_RLSI))
|
return;
|
return;
|
|
|
uart_clear_int(uart, uart->regs.iir);
|
|
|
|
TRACE("Raiseing receiver line status interrupt\n");
|
TRACE("Raiseing receiver line status interrupt\n");
|
|
|
/* Highest priority interrupt */
|
/* Highest priority interrupt */
|
|
if((uart->regs.iir != UART_IIR_RLSI) && (uart->regs.iir != UART_IIR_NO_INT)) {
|
|
uart_clear_int(uart, uart->regs.iir);
|
|
uart->regs.iir = UART_IIR_RLSI;
|
|
} else {
|
uart->regs.iir = UART_IIR_RLSI;
|
uart->regs.iir = UART_IIR_RLSI;
|
SCHED_ADD(uart_int_rlsi, dat, UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_int_rlsi, dat, UART_CLOCK_DIVIDER);
|
report_interrupt(uart->irq);
|
report_interrupt(uart->irq);
|
}
|
}
|
|
}
|
|
|
/* Checks to see if an RLSI interrupt is due and schedules one if need be */
|
/* Checks to see if an RLSI interrupt is due and schedules one if need be */
|
static void uart_check_rlsi(void *dat)
|
static void uart_check_rlsi(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
if(uart->regs.lsr & (UART_LSR_OVRRUN | UART_LSR_PARITY | UART_LSR_FRAME |
|
if(uart->regs.lsr & (UART_LSR_OVRRUN | UART_LSR_PARITY | UART_LSR_FRAME |
|
UART_LSR_BREAK))
|
UART_LSR_BREAK))
|
uart_int_rlsi(uart);
|
uart_int_rlsi(uart);
|
}
|
}
|
|
|
/* Checks to see if an RDI interrupt is due and schedules one if need be */
|
/* Checks to see if an RDI interrupt is due and schedules one if need be */
|
static void uart_check_rdi(void *dat)
|
static void uart_check_rdi(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
if(uart->istat.rxbuf_full >= UART_FIFO_TRIGGER(uart->regs.fcr >> 6))
|
if(uart->istat.rxbuf_full >= UART_FIFO_TRIGGER(uart->regs.fcr >> 6)) {
|
|
TRACE("FIFO trigger level reached %i\n",
|
|
UART_FIFO_TRIGGER(uart->regs.fcr >> 6));
|
uart_int_rdi(uart);
|
uart_int_rdi(uart);
|
}
|
}
|
|
}
|
|
|
/* Raises the next highest priority interrupt */
|
/* Raises the next highest priority interrupt */
|
static void uart_next_int(void *dat)
|
static void uart_next_int(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
/* Interrupt detection in proper priority order. */
|
/* Interrupt detection in proper priority order. */
|
if((uart->istat.ints & (1 << UART_IIR_RLSI)) &&
|
if((uart->istat.ints & (1 << UART_IIR_RLSI)) &&
|
(uart->regs.ier & UART_IER_RLSI))
|
(uart->regs.ier & UART_IER_RLSI))
|
uart_int_rlsi(uart);
|
uart_int_rlsi(uart);
|
else if((uart->istat.ints & (1 << UART_IIR_RDI)) &&
|
else if((uart->istat.ints & (1 << UART_IIR_RDI)) &&
|
(uart->regs.ier & UART_IER_RDI))
|
(uart->regs.ier & UART_IER_RDI))
|
uart_int_rdi(uart);
|
uart_int_rdi(uart);
|
else if((uart->istat.ints & (1 << UART_IIR_CTI)) &&
|
else if((uart->istat.ints & (1 << UART_IIR_CTI)) &&
|
(uart->regs.ier & UART_IER_RDI))
|
(uart->regs.ier & UART_IER_RDI))
|
uart_int_cti(uart);
|
uart_int_cti(uart);
|
else if((uart->istat.ints & (1 << UART_IIR_THRI)) &&
|
else if((uart->istat.ints & (1 << UART_IIR_THRI)) &&
|
(uart->regs.ier & UART_IER_THRI))
|
(uart->regs.ier & UART_IER_THRI))
|
uart_int_thri(uart);
|
uart_int_thri(uart);
|
else if((uart->istat.ints & (1 << UART_IIR_MSI)) &&
|
else if((uart->istat.ints & (1 << UART_IIR_MSI)) &&
|
(uart->regs.ier & UART_IER_MSI))
|
(uart->regs.ier & UART_IER_MSI))
|
uart_int_msi(uart);
|
uart_int_msi(uart);
|
else
|
else
|
uart->regs.iir = UART_IIR_NO_INT;
|
uart->regs.iir = UART_IIR_NO_INT;
|
}
|
}
|
|
|
/* Clears potentially pending interrupts */
|
/* Clears potentially pending interrupts */
|
static void uart_clear_int(struct dev_16450 *uart, int intr)
|
static void uart_clear_int(struct dev_16450 *uart, int intr)
|
{
|
{
|
uart->istat.ints &= ~(1 << intr);
|
uart->istat.ints &= ~(1 << intr);
|
|
|
|
TRACE("Interrupt pending was %x\n", uart->regs.iir);
|
|
|
/* Short-circuit most likely case */
|
/* Short-circuit most likely case */
|
if(uart->regs.iir == UART_IIR_NO_INT)
|
if(uart->regs.iir == UART_IIR_NO_INT)
|
return;
|
return;
|
|
|
if(intr != uart->regs.iir)
|
if(intr != uart->regs.iir)
|
return;
|
return;
|
|
|
TRACE("Clearing interrupt 0x%x\n", intr);
|
TRACE("Clearing interrupt 0x%x\n", intr);
|
|
|
uart->regs.iir = UART_IIR_NO_INT;
|
uart->regs.iir = UART_IIR_NO_INT;
|
|
|
switch(intr) {
|
switch(intr) {
|
case UART_IIR_RLSI:
|
case UART_IIR_RLSI:
|
SCHED_FIND_REMOVE(uart_int_rlsi, uart);
|
SCHED_FIND_REMOVE(uart_int_rlsi, uart);
|
break;
|
break;
|
case UART_IIR_RDI:
|
case UART_IIR_RDI:
|
SCHED_FIND_REMOVE(uart_int_rdi, uart);
|
SCHED_FIND_REMOVE(uart_int_rdi, uart);
|
break;
|
break;
|
case UART_IIR_CTI:
|
case UART_IIR_CTI:
|
SCHED_FIND_REMOVE(uart_int_cti, uart);
|
SCHED_FIND_REMOVE(uart_int_cti, uart);
|
break;
|
break;
|
case UART_IIR_THRI:
|
case UART_IIR_THRI:
|
SCHED_FIND_REMOVE(uart_int_thri, uart);
|
SCHED_FIND_REMOVE(uart_int_thri, uart);
|
break;
|
break;
|
case UART_IIR_MSI:
|
case UART_IIR_MSI:
|
SCHED_FIND_REMOVE(uart_int_msi, uart);
|
SCHED_FIND_REMOVE(uart_int_msi, uart);
|
break;
|
break;
|
}
|
}
|
|
|
/* Schedule this job as there is no rush to send the next interrupt (the or.
|
/* Schedule this job as there is no rush to send the next interrupt (the or.
|
* code is probably still running with interrupts disabled and this function
|
* code is probably still running with interrupts disabled and this function
|
* is called from the uart_{read,write}_byte functions. */
|
* is called from the uart_{read,write}_byte functions. */
|
SCHED_ADD(uart_next_int, uart, 0);
|
SCHED_ADD(uart_next_int, uart, 0);
|
}
|
}
|
|
|
/*----------------------------------------------------[ Loopback handling ]---*/
|
/*----------------------------------------------------[ Loopback handling ]---*/
|
static void uart_loopback(struct dev_16450 *uart)
|
static void uart_loopback(struct dev_16450 *uart)
|
{
|
{
|
if(!(uart->regs.mcr & UART_MCR_LOOP))
|
if(!(uart->regs.mcr & UART_MCR_LOOP))
|
return;
|
return;
|
|
|
if((uart->regs.mcr & UART_MCR_AUX2) != ((uart->regs.msr & UART_MSR_DCD) >> 4))
|
if((uart->regs.mcr & UART_MCR_AUX2) != ((uart->regs.msr & UART_MSR_DCD) >> 4))
|
uart->regs.msr |= UART_MSR_DDCD;
|
uart->regs.msr |= UART_MSR_DDCD;
|
|
|
if((uart->regs.mcr & UART_MCR_AUX1) < ((uart->regs.msr & UART_MSR_RI) >> 4))
|
if((uart->regs.mcr & UART_MCR_AUX1) < ((uart->regs.msr & UART_MSR_RI) >> 4))
|
uart->regs.msr |= UART_MSR_TERI;
|
uart->regs.msr |= UART_MSR_TERI;
|
|
|
if((uart->regs.mcr & UART_MCR_RTS) != ((uart->regs.msr & UART_MSR_CTS) >> 3))
|
if((uart->regs.mcr & UART_MCR_RTS) != ((uart->regs.msr & UART_MSR_CTS) >> 3))
|
uart->regs.msr |= UART_MSR_DCTS;
|
uart->regs.msr |= UART_MSR_DCTS;
|
|
|
if((uart->regs.mcr & UART_MCR_DTR) != ((uart->regs.msr & UART_MSR_DSR) >> 5))
|
if((uart->regs.mcr & UART_MCR_DTR) != ((uart->regs.msr & UART_MSR_DSR) >> 5))
|
uart->regs.msr |= UART_MSR_DDSR;
|
uart->regs.msr |= UART_MSR_DDSR;
|
|
|
uart->regs.msr &= ~(UART_MSR_DCD | UART_MSR_RI | UART_MSR_DSR | UART_MSR_CTS);
|
uart->regs.msr &= ~(UART_MSR_DCD | UART_MSR_RI | UART_MSR_DSR | UART_MSR_CTS);
|
uart->regs.msr |= ((uart->regs.mcr & UART_MCR_AUX2) << 4);
|
uart->regs.msr |= ((uart->regs.mcr & UART_MCR_AUX2) << 4);
|
uart->regs.msr |= ((uart->regs.mcr & UART_MCR_AUX1) << 4);
|
uart->regs.msr |= ((uart->regs.mcr & UART_MCR_AUX1) << 4);
|
uart->regs.msr |= ((uart->regs.mcr & UART_MCR_RTS) << 3);
|
uart->regs.msr |= ((uart->regs.mcr & UART_MCR_RTS) << 3);
|
uart->regs.msr |= ((uart->regs.mcr & UART_MCR_DTR) << 5);
|
uart->regs.msr |= ((uart->regs.mcr & UART_MCR_DTR) << 5);
|
|
|
if(uart->regs.msr & (UART_MSR_DCTS | UART_MSR_DDSR | UART_MSR_TERI |
|
if(uart->regs.msr & (UART_MSR_DCTS | UART_MSR_DDSR | UART_MSR_TERI |
|
UART_MSR_DDCD))
|
UART_MSR_DDCD))
|
uart_int_msi(uart);
|
uart_int_msi(uart);
|
}
|
}
|
|
|
/*----------------------------------------------------[ Transmitter logic ]---*/
|
/*----------------------------------------------------[ Transmitter logic ]---*/
|
/* Sends the data in the shift register to the outside world */
|
/* Sends the data in the shift register to the outside world */
|
static void send_char (struct dev_16450 *uart, int bits_send)
|
static void send_char (struct dev_16450 *uart, int bits_send)
|
{
|
{
|
PRINTF ("%c", (char)uart->iregs.txser);
|
PRINTF ("%c", (char)uart->iregs.txser);
|
TRACE("TX \'%c\' via UART at %"PRIxADDR"\n", (char)uart->iregs.txser,
|
TRACE("TX \'%c\' via UART at %"PRIxADDR"\n", (char)uart->iregs.txser,
|
uart->baseaddr);
|
uart->baseaddr);
|
if (uart->regs.mcr & UART_MCR_LOOP)
|
if (uart->regs.mcr & UART_MCR_LOOP)
|
uart->iregs.loopback = uart->iregs.txser;
|
uart->iregs.loopback = uart->iregs.txser;
|
else {
|
else {
|
/* Send to either VAPI or to file */
|
/* Send to either VAPI or to file */
|
if (uart->vapi_id) {
|
if (uart->vapi_id) {
|
int par, pe, fe, nbits;
|
int par, pe, fe, nbits;
|
int j, data;
|
int j, data;
|
unsigned long packet = 0;
|
unsigned long packet = 0;
|
|
|
nbits = MIN (bits_send, (uart->regs.lcr & UART_LCR_WLEN8) + 5);
|
nbits = MIN (bits_send, (uart->regs.lcr & UART_LCR_WLEN8) + 5);
|
/* Encode a packet */
|
/* Encode a packet */
|
packet = uart->iregs.txser & ((1 << nbits) - 1);
|
packet = uart->iregs.txser & ((1 << nbits) - 1);
|
|
|
/* Calculate parity */
|
/* Calculate parity */
|
for (j = 0, par = 0; j < nbits; j++)
|
for (j = 0, par = 0; j < nbits; j++)
|
par ^= (packet >> j) & 1;
|
par ^= (packet >> j) & 1;
|
|
|
if (uart->regs.lcr & UART_LCR_PARITY) {
|
if (uart->regs.lcr & UART_LCR_PARITY) {
|
if (uart->regs.lcr & UART_LCR_SPAR) {
|
if (uart->regs.lcr & UART_LCR_SPAR) {
|
packet |= 1 << nbits;
|
packet |= 1 << nbits;
|
} else {
|
} else {
|
if (uart->regs.lcr & UART_LCR_EPAR)
|
if (uart->regs.lcr & UART_LCR_EPAR)
|
packet |= par << nbits;
|
packet |= par << nbits;
|
else
|
else
|
packet |= (par ^ 1) << nbits;
|
packet |= (par ^ 1) << nbits;
|
}
|
}
|
nbits++;
|
nbits++;
|
}
|
}
|
packet |= 1 << (nbits++);
|
packet |= 1 << (nbits++);
|
if (uart->regs.lcr & UART_LCR_STOP)
|
if (uart->regs.lcr & UART_LCR_STOP)
|
packet |= 1 << (nbits++);
|
packet |= 1 << (nbits++);
|
|
|
/* Decode a packet */
|
/* Decode a packet */
|
nbits = (uart->vapi.lcr & UART_LCR_WLEN8) + 5;
|
nbits = (uart->vapi.lcr & UART_LCR_WLEN8) + 5;
|
data = packet & ((1 << nbits) - 1);
|
data = packet & ((1 << nbits) - 1);
|
|
|
/* Calculate parity, including parity bit */
|
/* Calculate parity, including parity bit */
|
for (j = 0, par = 0; j < nbits + 1; j++)
|
for (j = 0, par = 0; j < nbits + 1; j++)
|
par ^= (packet >> j) & 1;
|
par ^= (packet >> j) & 1;
|
|
|
if (uart->vapi.lcr & UART_LCR_PARITY) {
|
if (uart->vapi.lcr & UART_LCR_PARITY) {
|
if (uart->vapi.lcr & UART_LCR_SPAR) {
|
if (uart->vapi.lcr & UART_LCR_SPAR) {
|
pe = !((packet >> nbits) & 1);
|
pe = !((packet >> nbits) & 1);
|
} else {
|
} else {
|
if (uart->vapi.lcr & UART_LCR_EPAR)
|
if (uart->vapi.lcr & UART_LCR_EPAR)
|
pe = par != 0;
|
pe = par != 0;
|
else
|
else
|
pe = par != 1;
|
pe = par != 1;
|
}
|
}
|
nbits++;
|
nbits++;
|
} else
|
} else
|
pe = 0;
|
pe = 0;
|
|
|
fe = ((packet >> (nbits++)) & 1) ^ 1;
|
fe = ((packet >> (nbits++)) & 1) ^ 1;
|
if (uart->vapi.lcr & UART_LCR_STOP)
|
if (uart->vapi.lcr & UART_LCR_STOP)
|
fe |= ((packet >> (nbits++)) & 1) ^ 1;
|
fe |= ((packet >> (nbits++)) & 1) ^ 1;
|
|
|
TRACE ("lcr vapi %02x, uart %02x\n", uart->vapi.lcr, uart->regs.lcr);
|
TRACE ("lcr vapi %02x, uart %02x\n", uart->vapi.lcr, uart->regs.lcr);
|
data |= (uart->vapi.lcr << 8) | (pe << 16) | (fe << 17) | (uart->vapi.lcr << 8);
|
data |= (uart->vapi.lcr << 8) | (pe << 16) | (fe << 17) | (uart->vapi.lcr << 8);
|
TRACE ("vapi_send (%08lx, %08x)\n", uart->vapi_id, data);
|
TRACE ("vapi_send (%08lx, %08x)\n", uart->vapi_id, data);
|
vapi_send (uart->vapi_id, data);
|
vapi_send (uart->vapi_id, data);
|
} else {
|
} else {
|
char buffer[1] = { uart->iregs.txser & 0xFF };
|
char buffer[1] = { uart->iregs.txser & 0xFF };
|
channel_write(uart->channel, buffer, 1);
|
channel_write(uart->channel, buffer, 1);
|
}
|
}
|
}
|
}
|
}
|
}
|
|
|
/* Called when all the bits have been shifted out of the shift register */
|
/* Called when all the bits have been shifted out of the shift register */
|
void uart_char_clock(void *dat)
|
void uart_char_clock(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
TRACE("Sending data in shift reg: 0x%02"PRIx8"\n", uart->iregs.txser);
|
TRACE("Sending data in shift reg: 0x%02"PRIx8"\n", uart->iregs.txser);
|
/* We've sent all bits */
|
/* We've sent all bits */
|
send_char(uart, (uart->regs.lcr & UART_LCR_WLEN8) + 5);
|
send_char(uart, (uart->regs.lcr & UART_LCR_WLEN8) + 5);
|
|
|
if(!uart->istat.txbuf_full)
|
if(!uart->istat.txbuf_full)
|
uart->regs.lsr |= UART_LSR_TXSERE;
|
uart->regs.lsr |= UART_LSR_TXSERE;
|
else
|
else
|
uart_tx_send(uart);
|
uart_tx_send(uart);
|
}
|
}
|
|
|
/* Called when a break has been shifted out of the shift register */
|
/* Called when a break has been shifted out of the shift register */
|
void uart_send_break(void *dat)
|
void uart_send_break(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
TRACE("Sending break\n");
|
TRACE("Sending break\n");
|
#if 0
|
#if 0
|
/* Send broken frame */
|
/* Send broken frame */
|
int nbits_sent = ((uart->regs.lcr & UART_LCR_WLEN8) + 5) * (uart->istat.txser_clks - 1) / uart->char_clks;
|
int nbits_sent = ((uart->regs.lcr & UART_LCR_WLEN8) + 5) * (uart->istat.txser_clks - 1) / uart->char_clks;
|
send_char(i, nbits_sent);
|
send_char(i, nbits_sent);
|
#endif
|
#endif
|
/* Send one break signal */
|
/* Send one break signal */
|
vapi_send (uart->vapi_id, UART_LCR_SBC << 8);
|
vapi_send (uart->vapi_id, UART_LCR_SBC << 8);
|
|
|
/* Send the next char (if there is one) */
|
/* Send the next char (if there is one) */
|
if(!uart->istat.txbuf_full)
|
if(!uart->istat.txbuf_full)
|
uart->regs.lsr |= UART_LSR_TXSERE;
|
uart->regs.lsr |= UART_LSR_TXSERE;
|
else
|
else
|
uart_tx_send(uart);
|
uart_tx_send(uart);
|
}
|
}
|
|
|
/* Scheduled whenever the TX buffer has characters in it and we aren't sending
|
/* Scheduled whenever the TX buffer has characters in it and we aren't sending
|
* a character. */
|
* a character. */
|
void uart_tx_send(void *dat)
|
void uart_tx_send(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
uart->iregs.txser = uart->regs.txbuf[uart->istat.txbuf_tail];
|
uart->iregs.txser = uart->regs.txbuf[uart->istat.txbuf_tail];
|
uart->istat.txbuf_tail = (uart->istat.txbuf_tail + 1) % uart->fifo_len;
|
uart->istat.txbuf_tail = (uart->istat.txbuf_tail + 1) % uart->fifo_len;
|
uart->istat.txbuf_full--;
|
uart->istat.txbuf_full--;
|
uart->regs.lsr &= ~UART_LSR_TXSERE;
|
uart->regs.lsr &= ~UART_LSR_TXSERE;
|
|
|
TRACE("Moveing head of TX fifo (fill: %i) to shift reg 0x%02"PRIx8"\n",
|
TRACE("Moveing head of TX fifo (fill: %i) to shift reg 0x%02"PRIx8"\n",
|
uart->istat.txbuf_full, uart->iregs.txser);
|
uart->istat.txbuf_full, uart->iregs.txser);
|
|
|
/* Schedules a char_clock to run in the correct amount of time */
|
/* Schedules a char_clock to run in the correct amount of time */
|
if(!(uart->regs.lcr & UART_LCR_SBC)) {
|
if(!(uart->regs.lcr & UART_LCR_SBC)) {
|
SCHED_ADD(uart_char_clock, uart, uart->char_clks * UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_char_clock, uart, uart->char_clks * UART_CLOCK_DIVIDER);
|
} else {
|
} else {
|
TRACE("Sending break not char\n");
|
TRACE("Sending break not char\n");
|
SCHED_ADD(uart_send_break, uart, 0);
|
SCHED_ADD(uart_send_break, uart, 0);
|
}
|
}
|
|
|
/* When UART is in either character mode, i.e. 16450 emulation mode, or FIFO
|
/* When UART is in either character mode, i.e. 16450 emulation mode, or FIFO
|
* mode, the THRE interrupt is raised when THR transitions from full to empty.
|
* mode, the THRE interrupt is raised when THR transitions from full to empty.
|
*/
|
*/
|
if (!uart->istat.txbuf_full) {
|
if (!uart->istat.txbuf_full) {
|
uart->regs.lsr |= UART_LSR_TXBUFE;
|
uart->regs.lsr |= UART_LSR_TXBUFE;
|
uart_int_thri(uart);
|
uart_int_thri(uart);
|
}
|
}
|
}
|
}
|
|
|
/*-------------------------------------------------------[ Receiver logic ]---*/
|
/*-------------------------------------------------------[ Receiver logic ]---*/
|
/* Adds a character to the RX FIFO */
|
/* Adds a character to the RX FIFO */
|
static void uart_add_char (struct dev_16450 *uart, int ch)
|
static void uart_add_char (struct dev_16450 *uart, int ch)
|
{
|
{
|
uart->regs.lsr |= UART_LSR_RDRDY;
|
uart->regs.lsr |= UART_LSR_RDRDY;
|
uart_clear_int(uart, UART_IIR_CTI);
|
uart_clear_int(uart, UART_IIR_CTI);
|
SCHED_FIND_REMOVE(uart_int_cti, uart);
|
SCHED_FIND_REMOVE(uart_int_cti, uart);
|
SCHED_ADD(uart_int_cti, uart,
|
SCHED_ADD(uart_int_cti, uart,
|
uart->char_clks * UART_CHAR_TIMEOUT * UART_CLOCK_DIVIDER);
|
uart->char_clks * UART_CHAR_TIMEOUT * UART_CLOCK_DIVIDER);
|
|
|
if (uart->istat.rxbuf_full + 1 > uart->fifo_len) {
|
if (uart->istat.rxbuf_full + 1 > uart->fifo_len) {
|
uart->regs.lsr |= UART_LSR_OVRRUN | UART_LSR_RXERR;
|
uart->regs.lsr |= UART_LSR_OVRRUN | UART_LSR_RXERR;
|
uart_int_rlsi(uart);
|
uart_int_rlsi(uart);
|
} else {
|
} else {
|
TRACE("add %02x\n", ch);
|
TRACE("add %02x\n", ch);
|
uart->regs.rxbuf[uart->istat.rxbuf_head] = ch;
|
uart->regs.rxbuf[uart->istat.rxbuf_head] = ch;
|
uart->istat.rxbuf_head = (uart->istat.rxbuf_head + 1) % uart->fifo_len;
|
uart->istat.rxbuf_head = (uart->istat.rxbuf_head + 1) % uart->fifo_len;
|
if(!uart->istat.rxbuf_full++) {
|
if(!uart->istat.rxbuf_full++) {
|
uart->regs.lsr |= ch >> 8;
|
uart->regs.lsr |= ch >> 8;
|
uart_check_rlsi(uart);
|
uart_check_rlsi(uart);
|
}
|
}
|
}
|
}
|
uart_check_rdi(uart);
|
uart_check_rdi(uart);
|
}
|
}
|
|
|
/* Called when a break sequence is about to start. It stops receiveing
|
/* Called when a break sequence is about to start. It stops receiveing
|
* characters and schedules the uart_recv_break to send the break */
|
* characters and schedules the uart_recv_break to send the break */
|
void uart_recv_break_start(void *dat)
|
void uart_recv_break_start(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
uart->istat.receiveing = 0;
|
uart->istat.receiveing = 0;
|
uart->istat.recv_break = 1;
|
uart->istat.recv_break = 1;
|
|
|
SCHED_FIND_REMOVE(uart_recv_char, uart);
|
SCHED_FIND_REMOVE(uart_recv_char, uart);
|
|
|
if(uart->vapi_id && (uart->vapi_buf_head_ptr != uart->vapi_buf_tail_ptr))
|
if(uart->vapi_id && (uart->vapi_buf_head_ptr != uart->vapi_buf_tail_ptr))
|
uart_vapi_cmd(uart);
|
uart_vapi_cmd(uart);
|
|
|
SCHED_ADD(uart_recv_break, uart,
|
SCHED_ADD(uart_recv_break, uart,
|
UART_BREAK_COUNT * uart->vapi.char_clks * UART_CLOCK_DIVIDER);
|
UART_BREAK_COUNT * uart->vapi.char_clks * UART_CLOCK_DIVIDER);
|
}
|
}
|
|
|
/* Stops sending breaks and starts receiveing characters */
|
/* Stops sending breaks and starts receiveing characters */
|
void uart_recv_break_stop(void *dat)
|
void uart_recv_break_stop(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
uart->istat.recv_break = 0;
|
uart->istat.recv_break = 0;
|
SCHED_FIND_REMOVE(uart_recv_break, dat);
|
SCHED_FIND_REMOVE(uart_recv_break, dat);
|
}
|
}
|
|
|
/* Receives a break */
|
/* Receives a break */
|
void uart_recv_break(void *dat)
|
void uart_recv_break(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
unsigned lsr = UART_LSR_BREAK | UART_LSR_RXERR | UART_LSR_RDRDY;
|
unsigned lsr = UART_LSR_BREAK | UART_LSR_RXERR | UART_LSR_RDRDY;
|
|
|
uart_add_char(uart, lsr << 8);
|
uart_add_char(uart, lsr << 8);
|
}
|
}
|
|
|
/* Moves a character from the serial register to the RX FIFO */
|
/* Moves a character from the serial register to the RX FIFO */
|
void uart_recv_char(void *dat)
|
void uart_recv_char(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
uint16_t char_to_add;
|
uint16_t char_to_add;
|
|
|
/* Set unused character bits to zero and allow lsr register in fifo */
|
/* Set unused character bits to zero and allow lsr register in fifo */
|
char_to_add = uart->iregs.rxser & (((1 << ((uart->regs.lcr & 3) + 5)) - 1) | 0xff00);
|
char_to_add = uart->iregs.rxser & (((1 << ((uart->regs.lcr & 3) + 5)) - 1) | 0xff00);
|
|
|
TRACE("Receiving 0x%02"PRIx16"'%c' via UART at %"PRIxADDR"\n",
|
TRACE("Receiving 0x%02"PRIx16"'%c' via UART at %"PRIxADDR"\n",
|
char_to_add, (char)char_to_add, uart->baseaddr);
|
char_to_add, (char)char_to_add, uart->baseaddr);
|
PRINTF ("%c", (char)char_to_add);
|
PRINTF ("%c", (char)char_to_add);
|
|
|
if (uart->regs.mcr & UART_MCR_LOOP) {
|
if (uart->regs.mcr & UART_MCR_LOOP) {
|
uart->iregs.rxser = uart->iregs.loopback;
|
uart->iregs.rxser = uart->iregs.loopback;
|
uart->istat.receiveing = 1;
|
uart->istat.receiveing = 1;
|
SCHED_ADD(uart_recv_char, uart, uart->char_clks * UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_recv_char, uart, uart->char_clks * UART_CLOCK_DIVIDER);
|
} else {
|
} else {
|
uart->istat.receiveing = 0;
|
uart->istat.receiveing = 0;
|
uart_sched_recv_check(uart);
|
uart_sched_recv_check(uart);
|
if(uart->vapi_id && (uart->vapi_buf_head_ptr != uart->vapi_buf_tail_ptr))
|
if(uart->vapi_id && (uart->vapi_buf_head_ptr != uart->vapi_buf_tail_ptr))
|
SCHED_ADD(uart_vapi_cmd, uart, 0);
|
SCHED_ADD(uart_vapi_cmd, uart, 0);
|
}
|
}
|
|
|
uart_add_char(uart, char_to_add);
|
uart_add_char(uart, char_to_add);
|
}
|
}
|
|
|
/* Checks if there is a character waiting to be received */
|
/* Checks if there is a character waiting to be received */
|
void uart_check_char(void *dat)
|
void uart_check_char(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
uint8_t buffer;
|
uint8_t buffer;
|
int retval;
|
int retval;
|
|
|
/* Check if there is something waiting, and put it into rxser */
|
/* Check if there is something waiting, and put it into rxser */
|
retval = channel_read(uart->channel, (char *)&buffer, 1);
|
retval = channel_read(uart->channel, (char *)&buffer, 1);
|
if(retval > 0) {
|
if(retval > 0) {
|
TRACE("Shifting 0x%02"PRIx8" (`%c') into shift reg\n", buffer, buffer);
|
TRACE("Shifting 0x%02"PRIx8" (`%c') into shift reg\n", buffer, buffer);
|
uart->iregs.rxser = buffer;
|
uart->iregs.rxser = buffer;
|
uart->istat.receiveing = 1;
|
uart->istat.receiveing = 1;
|
SCHED_ADD(uart_recv_char, uart, uart->char_clks * UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_recv_char, uart, uart->char_clks * UART_CLOCK_DIVIDER);
|
return;
|
return;
|
}
|
}
|
|
|
if(!retval) {
|
if(!retval) {
|
SCHED_ADD(uart_check_char, uart, UART_FGETC_SLOWDOWN * UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_check_char, uart, UART_FGETC_SLOWDOWN * UART_CLOCK_DIVIDER);
|
return;
|
return;
|
}
|
}
|
|
|
if(retval < 0)
|
if(retval < 0)
|
perror(uart->channel_str);
|
perror(uart->channel_str);
|
}
|
}
|
|
|
static void uart_sched_recv_check(struct dev_16450 *uart)
|
static void uart_sched_recv_check(struct dev_16450 *uart)
|
{
|
{
|
if(!uart->vapi_id)
|
if(!uart->vapi_id)
|
SCHED_ADD(uart_check_char, uart, UART_FGETC_SLOWDOWN * UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_check_char, uart, UART_FGETC_SLOWDOWN * UART_CLOCK_DIVIDER);
|
}
|
}
|
|
|
/*----------------------------------------------------[ UART I/O handling ]---*/
|
/*----------------------------------------------------[ UART I/O handling ]---*/
|
/* Set a specific UART register with value. */
|
/* Set a specific UART register with value. */
|
void uart_write_byte(oraddr_t addr, uint8_t value, void *dat)
|
void uart_write_byte(oraddr_t addr, uint8_t value, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
if (uart->regs.lcr & UART_LCR_DLAB) {
|
if (uart->regs.lcr & UART_LCR_DLAB) {
|
switch (addr) {
|
switch (addr) {
|
case UART_DLL:
|
case UART_DLL:
|
uart->regs.dll = value;
|
uart->regs.dll = value;
|
uart->char_clks = char_clks(uart->regs.dll, uart->regs.dlh, uart->regs.lcr);
|
uart->char_clks = char_clks(uart->regs.dll, uart->regs.dlh, uart->regs.lcr);
|
TRACE("\tSetting char_clks to %li (%02x, %02x, %02x)\n", uart->char_clks,
|
TRACE("\tSetting char_clks to %li (%02x, %02x, %02x)\n", uart->char_clks,
|
uart->regs.dll, uart->regs.dlh, uart->regs.lcr);
|
uart->regs.dll, uart->regs.dlh, uart->regs.lcr);
|
return;
|
return;
|
case UART_DLH:
|
case UART_DLH:
|
TRACE("Setting dlh with %"PRIx8"\n", value);
|
TRACE("Setting dlh with %"PRIx8"\n", value);
|
uart->regs.dlh = value;
|
uart->regs.dlh = value;
|
return;
|
return;
|
}
|
}
|
}
|
}
|
|
|
switch (addr) {
|
switch (addr) {
|
case UART_TXBUF:
|
case UART_TXBUF:
|
TRACE("Adding %"PRIx8" to TX FIFO\n", value);
|
TRACE("Adding %"PRIx8" to TX FIFO (fill %i)\n", value,
|
|
uart->istat.txbuf_full);
|
uart->regs.lsr &= ~UART_LSR_TXBUFE;
|
uart->regs.lsr &= ~UART_LSR_TXBUFE;
|
if (uart->istat.txbuf_full < uart->fifo_len) {
|
if (uart->istat.txbuf_full < uart->fifo_len) {
|
uart->regs.txbuf[uart->istat.txbuf_head] = value;
|
uart->regs.txbuf[uart->istat.txbuf_head] = value;
|
uart->istat.txbuf_head = (uart->istat.txbuf_head + 1) % uart->fifo_len;
|
uart->istat.txbuf_head = (uart->istat.txbuf_head + 1) % uart->fifo_len;
|
if(!uart->istat.txbuf_full++ && (uart->regs.lsr & UART_LSR_TXSERE))
|
if(!uart->istat.txbuf_full++ && (uart->regs.lsr & UART_LSR_TXSERE))
|
SCHED_ADD(uart_tx_send, uart, 0);
|
SCHED_ADD(uart_tx_send, uart, 0);
|
} else
|
} else
|
uart->regs.txbuf[uart->istat.txbuf_head] = value;
|
uart->regs.txbuf[uart->istat.txbuf_head] = value;
|
|
|
uart_clear_int(uart, UART_IIR_THRI);
|
uart_clear_int(uart, UART_IIR_THRI);
|
break;
|
break;
|
case UART_FCR:
|
case UART_FCR:
|
TRACE("Setting FCR reg with %"PRIx8"\n", value);
|
TRACE("Setting FCR reg with %"PRIx8"\n", value);
|
uart->regs.fcr = value & UART_VALID_FCR;
|
uart->regs.fcr = value & UART_VALID_FCR;
|
if ((uart->fifo_len == 1 && (value & UART_FCR_FIE))
|
if ((uart->fifo_len == 1 && (value & UART_FCR_FIE))
|
|| (uart->fifo_len != 1 && !(value & UART_FCR_FIE)))
|
|| (uart->fifo_len != 1 && !(value & UART_FCR_FIE)))
|
value |= UART_FCR_RRXFI | UART_FCR_RTXFI;
|
value |= UART_FCR_RRXFI | UART_FCR_RTXFI;
|
uart->fifo_len = (value & UART_FCR_FIE) ? 16 : 1;
|
uart->fifo_len = (value & UART_FCR_FIE) ? 16 : 1;
|
if (value & UART_FCR_RTXFI) {
|
if (value & UART_FCR_RTXFI) {
|
uart->istat.txbuf_head = uart->istat.txbuf_tail = 0;
|
uart->istat.txbuf_head = uart->istat.txbuf_tail = 0;
|
uart->istat.txbuf_full = 0;
|
uart->istat.txbuf_full = 0;
|
uart->regs.lsr |= UART_LSR_TXBUFE;
|
uart->regs.lsr |= UART_LSR_TXBUFE;
|
|
|
/* For FIFO-mode only, THRE interrupt is set when THR and FIFO are empty
|
/* For FIFO-mode only, THRE interrupt is set when THR and FIFO are empty
|
*/
|
*/
|
if(uart->fifo_len == 16)
|
if(uart->fifo_len == 16)
|
SCHED_ADD(uart_int_thri, uart, 0);
|
SCHED_ADD(uart_int_thri, uart, 0);
|
|
|
SCHED_FIND_REMOVE(uart_tx_send, uart);
|
SCHED_FIND_REMOVE(uart_tx_send, uart);
|
}
|
}
|
if (value & UART_FCR_RRXFI) {
|
if (value & UART_FCR_RRXFI) {
|
uart->istat.rxbuf_head = uart->istat.rxbuf_tail = 0;
|
uart->istat.rxbuf_head = uart->istat.rxbuf_tail = 0;
|
uart->istat.rxbuf_full = 0;
|
uart->istat.rxbuf_full = 0;
|
uart->regs.lsr &= ~UART_LSR_RDRDY;
|
uart->regs.lsr &= ~UART_LSR_RDRDY;
|
uart_clear_int(uart, UART_IIR_RDI);
|
uart_clear_int(uart, UART_IIR_RDI);
|
uart_clear_int(uart, UART_IIR_CTI);
|
uart_clear_int(uart, UART_IIR_CTI);
|
}
|
}
|
break;
|
break;
|
case UART_IER:
|
case UART_IER:
|
uart->regs.ier = value & UART_VALID_IER;
|
uart->regs.ier = value & UART_VALID_IER;
|
TRACE("Enabling 0x%02x interrupts with 0x%x interrupts pending\n",
|
TRACE("Enabling 0x%02x interrupts with 0x%x interrupts pending\n",
|
value, uart->istat.ints);
|
value, uart->istat.ints);
|
SCHED_ADD(uart_next_int, uart, 0);
|
SCHED_ADD(uart_next_int, uart, 0);
|
break;
|
break;
|
case UART_LCR:
|
case UART_LCR:
|
TRACE("Setting LCR reg with %"PRIx8"\n", value);
|
TRACE("Setting LCR reg with %"PRIx8"\n", value);
|
if((uart->regs.lcr & UART_LCR_SBC) != (value & UART_LCR_SBC)) {
|
if((uart->regs.lcr & UART_LCR_SBC) != (value & UART_LCR_SBC)) {
|
if((value & UART_LCR_SBC) && !(uart->regs.lsr & UART_LSR_TXSERE)) {
|
if((value & UART_LCR_SBC) && !(uart->regs.lsr & UART_LSR_TXSERE)) {
|
/* Schedule a job to send the break char */
|
/* Schedule a job to send the break char */
|
SCHED_FIND_REMOVE(uart_char_clock, uart);
|
SCHED_FIND_REMOVE(uart_char_clock, uart);
|
SCHED_ADD(uart_send_break, uart, 0);
|
SCHED_ADD(uart_send_break, uart, 0);
|
}
|
}
|
if(!(value & UART_LCR_SBC) && !(uart->regs.lsr & UART_LSR_TXSERE)) {
|
if(!(value & UART_LCR_SBC) && !(uart->regs.lsr & UART_LSR_TXSERE)) {
|
/* Schedule a job to start sending characters */
|
/* Schedule a job to start sending characters */
|
SCHED_ADD(uart_tx_send, uart, 0);
|
SCHED_ADD(uart_tx_send, uart, 0);
|
/* Remove the uart_send_break job just in case it has not run yet */
|
/* Remove the uart_send_break job just in case it has not run yet */
|
SCHED_FIND_REMOVE(uart_char_clock, uart);
|
SCHED_FIND_REMOVE(uart_char_clock, uart);
|
}
|
}
|
}
|
}
|
uart->regs.lcr = value & UART_VALID_LCR;
|
uart->regs.lcr = value & UART_VALID_LCR;
|
uart->char_clks = char_clks(uart->regs.dll, uart->regs.dlh, uart->regs.lcr);
|
uart->char_clks = char_clks(uart->regs.dll, uart->regs.dlh, uart->regs.lcr);
|
break;
|
break;
|
case UART_MCR:
|
case UART_MCR:
|
TRACE("Setting MCR reg with %"PRIx8"\n", value);
|
TRACE("Setting MCR reg with %"PRIx8"\n", value);
|
uart->regs.mcr = value & UART_VALID_MCR;
|
uart->regs.mcr = value & UART_VALID_MCR;
|
uart_loopback(uart);
|
uart_loopback(uart);
|
break;
|
break;
|
case UART_SCR:
|
case UART_SCR:
|
TRACE("Setting SCR reg with %"PRIx8"\n", value);
|
TRACE("Setting SCR reg with %"PRIx8"\n", value);
|
uart->regs.scr = value;
|
uart->regs.scr = value;
|
break;
|
break;
|
default:
|
default:
|
TRACE("write out of range (addr %"PRIxADDR")\n", addr);
|
TRACE("write out of range (addr %"PRIxADDR")\n", addr);
|
}
|
}
|
}
|
}
|
|
|
/* Read a specific UART register. */
|
/* Read a specific UART register. */
|
uint8_t uart_read_byte(oraddr_t addr, void *dat)
|
uint8_t uart_read_byte(oraddr_t addr, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
uint8_t value = 0;
|
uint8_t value = 0;
|
|
|
if (uart->regs.lcr & UART_LCR_DLAB) {
|
if (uart->regs.lcr & UART_LCR_DLAB) {
|
switch (addr) {
|
switch (addr) {
|
case UART_DLL:
|
case UART_DLL:
|
value = uart->regs.dll;
|
value = uart->regs.dll;
|
TRACE("reading DLL = %"PRIx8"\n", value);
|
TRACE("reading DLL = %"PRIx8"\n", value);
|
return value;
|
return value;
|
case UART_DLH:
|
case UART_DLH:
|
value = uart->regs.dlh;
|
value = uart->regs.dlh;
|
TRACE("reading DLH = %"PRIx8"\n", value);
|
TRACE("reading DLH = %"PRIx8"\n", value);
|
return value;
|
return value;
|
}
|
}
|
}
|
}
|
|
|
switch (addr) {
|
switch (addr) {
|
case UART_RXBUF:
|
case UART_RXBUF:
|
{ /* Print out FIFO for debugging */
|
{ /* Print out FIFO for debugging */
|
int i;
|
int i;
|
TRACE("(%i/%i, %i, %i:", uart->istat.rxbuf_full, uart->fifo_len,
|
TRACE("(%i/%i, %i, %i:", uart->istat.rxbuf_full, uart->fifo_len,
|
uart->istat.rxbuf_head, uart->istat.rxbuf_tail);
|
uart->istat.rxbuf_head, uart->istat.rxbuf_tail);
|
for (i = 0; i < uart->istat.rxbuf_full; i++)
|
for (i = 0; i < uart->istat.rxbuf_full; i++)
|
TRACE("%02x ",
|
TRACE("%02x ",
|
uart->regs.rxbuf[(uart->istat.rxbuf_tail + i) % uart->fifo_len]);
|
uart->regs.rxbuf[(uart->istat.rxbuf_tail + i) % uart->fifo_len]);
|
TRACE(")\n");
|
TRACE(")\n");
|
}
|
}
|
if (uart->istat.rxbuf_full) {
|
if (uart->istat.rxbuf_full) {
|
value = uart->regs.rxbuf[uart->istat.rxbuf_tail];
|
value = uart->regs.rxbuf[uart->istat.rxbuf_tail];
|
uart->istat.rxbuf_tail = (uart->istat.rxbuf_tail + 1) % uart->fifo_len;
|
uart->istat.rxbuf_tail = (uart->istat.rxbuf_tail + 1) % uart->fifo_len;
|
uart->istat.rxbuf_full--;
|
uart->istat.rxbuf_full--;
|
TRACE("Reading %"PRIx8" out of RX FIFO\n", value);
|
TRACE("Reading %"PRIx8" out of RX FIFO\n", value);
|
} else
|
} else
|
TRACE("Trying to read out of RX FIFO but it's empty!\n");
|
TRACE("Trying to read out of RX FIFO but it's empty!\n");
|
|
|
uart_clear_int(uart, UART_IIR_RDI);
|
uart_clear_int(uart, UART_IIR_RDI);
|
uart_clear_int(uart, UART_IIR_CTI);
|
uart_clear_int(uart, UART_IIR_CTI);
|
SCHED_FIND_REMOVE(uart_int_cti, uart);
|
SCHED_FIND_REMOVE(uart_int_cti, uart);
|
|
|
if(uart->istat.rxbuf_full) {
|
if(uart->istat.rxbuf_full) {
|
uart->regs.lsr |= UART_LSR_RDRDY | uart->regs.rxbuf[uart->istat.rxbuf_tail] >> 8;
|
uart->regs.lsr |= UART_LSR_RDRDY | uart->regs.rxbuf[uart->istat.rxbuf_tail] >> 8;
|
SCHED_ADD(uart_int_cti, uart,
|
SCHED_ADD(uart_int_cti, uart,
|
uart->char_clks * UART_CHAR_TIMEOUT * UART_CLOCK_DIVIDER);
|
uart->char_clks * UART_CHAR_TIMEOUT * UART_CLOCK_DIVIDER);
|
/* Since we're not allowed to raise interrupts from read/write functions
|
/* Since we're not allowed to raise interrupts from read/write functions
|
* schedule them to run just after we have executed this read
|
* schedule them to run just after we have executed this read
|
* instruction. */
|
* instruction. */
|
SCHED_ADD(uart_check_rlsi, uart, 0);
|
SCHED_ADD(uart_check_rlsi, uart, 0);
|
SCHED_ADD(uart_check_rdi, uart, 0);
|
SCHED_ADD(uart_check_rdi, uart, 0);
|
} else {
|
} else {
|
uart->regs.lsr &= ~UART_LSR_RDRDY;
|
uart->regs.lsr &= ~UART_LSR_RDRDY;
|
}
|
}
|
break;
|
break;
|
case UART_IER:
|
case UART_IER:
|
value = uart->regs.ier & UART_VALID_IER;
|
value = uart->regs.ier & UART_VALID_IER;
|
TRACE("reading IER = %"PRIx8"\n", value);
|
TRACE("reading IER = %"PRIx8"\n", value);
|
break;
|
break;
|
case UART_IIR:
|
case UART_IIR:
|
value = (uart->regs.iir & UART_VALID_IIR) | 0xc0;
|
value = (uart->regs.iir & UART_VALID_IIR) | 0xc0;
|
/* Only clear the thri interrupt if it is the one we are repporting */
|
/* Only clear the thri interrupt if it is the one we are repporting */
|
if(uart->regs.iir == UART_IIR_THRI)
|
if(uart->regs.iir == UART_IIR_THRI)
|
uart_clear_int(uart, UART_IIR_THRI);
|
uart_clear_int(uart, UART_IIR_THRI);
|
TRACE("reading IIR = %"PRIx8"\n", value);
|
TRACE("reading IIR = %"PRIx8"\n", value);
|
break;
|
break;
|
case UART_LCR:
|
case UART_LCR:
|
value = uart->regs.lcr & UART_VALID_LCR;
|
value = uart->regs.lcr & UART_VALID_LCR;
|
TRACE("reading LCR = %"PRIx8"\n", value);
|
TRACE("reading LCR = %"PRIx8"\n", value);
|
break;
|
break;
|
case UART_MCR:
|
case UART_MCR:
|
value = 0;
|
value = 0;
|
TRACE("reading MCR = %"PRIx8"\n", value);
|
TRACE("reading MCR = %"PRIx8"\n", value);
|
break;
|
break;
|
case UART_LSR:
|
case UART_LSR:
|
value = uart->regs.lsr & UART_VALID_LSR;
|
value = uart->regs.lsr & UART_VALID_LSR;
|
uart->regs.lsr &=
|
uart->regs.lsr &=
|
~(UART_LSR_OVRRUN | UART_LSR_BREAK | UART_LSR_PARITY
|
~(UART_LSR_OVRRUN | UART_LSR_BREAK | UART_LSR_PARITY
|
| UART_LSR_FRAME | UART_LSR_RXERR);
|
| UART_LSR_FRAME | UART_LSR_RXERR);
|
/* Clear potentially pending RLSI interrupt */
|
/* Clear potentially pending RLSI interrupt */
|
uart_clear_int(uart, UART_IIR_RLSI);
|
uart_clear_int(uart, UART_IIR_RLSI);
|
TRACE("reading LSR = %"PRIx8"\n", value);
|
TRACE("reading LSR = %"PRIx8"\n", value);
|
break;
|
break;
|
case UART_MSR:
|
case UART_MSR:
|
value = uart->regs.msr & UART_VALID_MSR;
|
value = uart->regs.msr & UART_VALID_MSR;
|
uart->regs.msr = 0;
|
uart->regs.msr = 0;
|
uart_clear_int(uart, UART_IIR_MSI);
|
uart_clear_int(uart, UART_IIR_MSI);
|
uart_loopback(uart);
|
uart_loopback(uart);
|
TRACE("reading MSR = %"PRIx8"\n", value);
|
TRACE("reading MSR = %"PRIx8"\n", value);
|
break;
|
break;
|
case UART_SCR:
|
case UART_SCR:
|
value = uart->regs.scr;
|
value = uart->regs.scr;
|
TRACE("reading SCR = %"PRIx8"\n", value);
|
TRACE("reading SCR = %"PRIx8"\n", value);
|
break;
|
break;
|
default:
|
default:
|
TRACE("read out of range (addr %"PRIxADDR")\n", addr);
|
TRACE("read out of range (addr %"PRIxADDR")\n", addr);
|
}
|
}
|
return value;
|
return value;
|
}
|
}
|
|
|
/*--------------------------------------------------------[ VAPI handling ]---*/
|
/*--------------------------------------------------------[ VAPI handling ]---*/
|
/* Decodes the read vapi command */
|
/* Decodes the read vapi command */
|
static void uart_vapi_cmd(void *dat)
|
static void uart_vapi_cmd(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
int received = 0;
|
int received = 0;
|
|
|
while (!received) {
|
while (!received) {
|
if (uart->vapi_buf_head_ptr != uart->vapi_buf_tail_ptr) {
|
if (uart->vapi_buf_head_ptr != uart->vapi_buf_tail_ptr) {
|
unsigned long data = uart->vapi_buf[uart->vapi_buf_tail_ptr];
|
unsigned long data = uart->vapi_buf[uart->vapi_buf_tail_ptr];
|
TRACE("\tHandling: %08lx (%i,%i)\n", data, uart->vapi_buf_head_ptr,
|
TRACE("\tHandling: %08lx (%i,%i)\n", data, uart->vapi_buf_head_ptr,
|
uart->vapi_buf_tail_ptr);
|
uart->vapi_buf_tail_ptr);
|
uart->vapi_buf_tail_ptr = (uart->vapi_buf_tail_ptr + 1) % UART_VAPI_BUF_LEN;
|
uart->vapi_buf_tail_ptr = (uart->vapi_buf_tail_ptr + 1) % UART_VAPI_BUF_LEN;
|
switch (data >> 24) {
|
switch (data >> 24) {
|
case 0x00:
|
case 0x00:
|
uart->vapi.lcr = (data >> 8) & 0xff;
|
uart->vapi.lcr = (data >> 8) & 0xff;
|
/* Put data into rx fifo */
|
/* Put data into rx fifo */
|
uart->iregs.rxser = data & 0xff;
|
uart->iregs.rxser = data & 0xff;
|
uart->vapi.char_clks = char_clks (uart->vapi.dll, uart->vapi.dlh, uart->vapi.lcr);
|
uart->vapi.char_clks = char_clks (uart->vapi.dll, uart->vapi.dlh, uart->vapi.lcr);
|
if((uart->vapi.lcr & ~UART_LCR_SBC) != (uart->regs.lcr & ~UART_LCR_SBC)
|
if((uart->vapi.lcr & ~UART_LCR_SBC) != (uart->regs.lcr & ~UART_LCR_SBC)
|
|| uart->vapi.char_clks != uart->char_clks
|
|| uart->vapi.char_clks != uart->char_clks
|
|| uart->vapi.skew < -MAX_SKEW || uart->vapi.skew > MAX_SKEW) {
|
|| uart->vapi.skew < -MAX_SKEW || uart->vapi.skew > MAX_SKEW) {
|
if((uart->vapi.lcr & ~UART_LCR_SBC) != (uart->regs.lcr & ~UART_LCR_SBC))
|
if((uart->vapi.lcr & ~UART_LCR_SBC) != (uart->regs.lcr & ~UART_LCR_SBC))
|
WARN("unmatched VAPI (%02"PRIx8") and uart (%02"PRIx8") modes.\n",
|
WARN("unmatched VAPI (%02"PRIx8") and uart (%02"PRIx8") modes.\n",
|
uart->vapi.lcr & ~UART_LCR_SBC, uart->regs.lcr & ~UART_LCR_SBC);
|
uart->vapi.lcr & ~UART_LCR_SBC, uart->regs.lcr & ~UART_LCR_SBC);
|
if(uart->vapi.char_clks != uart->char_clks) {
|
if(uart->vapi.char_clks != uart->char_clks) {
|
WARN("unmatched VAPI (%li) and uart (%li) char clocks.\n",
|
WARN("unmatched VAPI (%li) and uart (%li) char clocks.\n",
|
uart->vapi.char_clks, uart->char_clks);
|
uart->vapi.char_clks, uart->char_clks);
|
WARN("VAPI: lcr: %02"PRIx8", dll: %02"PRIx8", dlh: %02"PRIx8"\n",
|
WARN("VAPI: lcr: %02"PRIx8", dll: %02"PRIx8", dlh: %02"PRIx8"\n",
|
uart->vapi.lcr, uart->vapi.dll, uart->vapi.dlh);
|
uart->vapi.lcr, uart->vapi.dll, uart->vapi.dlh);
|
WARN("UART: lcr: %02"PRIx8", dll: %02"PRIx8", dlh: %02"PRIx8"\n",
|
WARN("UART: lcr: %02"PRIx8", dll: %02"PRIx8", dlh: %02"PRIx8"\n",
|
uart->regs.lcr, uart->regs.dll, uart->vapi.dlh);
|
uart->regs.lcr, uart->regs.dll, uart->vapi.dlh);
|
}
|
}
|
if(uart->vapi.skew < -MAX_SKEW || uart->vapi.skew > MAX_SKEW)
|
if(uart->vapi.skew < -MAX_SKEW || uart->vapi.skew > MAX_SKEW)
|
WARN("VAPI skew is beyond max: %i\n", uart->vapi.skew);
|
WARN("VAPI skew is beyond max: %i\n", uart->vapi.skew);
|
/* Set error bits */
|
/* Set error bits */
|
uart->iregs.rxser |= (UART_LSR_FRAME | UART_LSR_RXERR) << 8;
|
uart->iregs.rxser |= (UART_LSR_FRAME | UART_LSR_RXERR) << 8;
|
if(uart->regs.lcr & UART_LCR_PARITY)
|
if(uart->regs.lcr & UART_LCR_PARITY)
|
uart->iregs.rxser |= UART_LSR_PARITY << 8;
|
uart->iregs.rxser |= UART_LSR_PARITY << 8;
|
}
|
}
|
if(!uart->istat.recv_break) {
|
if(!uart->istat.recv_break) {
|
uart->istat.receiveing = 1;
|
uart->istat.receiveing = 1;
|
SCHED_ADD(uart_recv_char, uart, uart->char_clks * UART_CLOCK_DIVIDER);
|
SCHED_ADD(uart_recv_char, uart, uart->char_clks * UART_CLOCK_DIVIDER);
|
}
|
}
|
received = 1;
|
received = 1;
|
break;
|
break;
|
case 0x01:
|
case 0x01:
|
uart->vapi.dll = (data >> 0) & 0xff;
|
uart->vapi.dll = (data >> 0) & 0xff;
|
uart->vapi.dlh = (data >> 8) & 0xff;
|
uart->vapi.dlh = (data >> 8) & 0xff;
|
break;
|
break;
|
case 0x02:
|
case 0x02:
|
uart->vapi.lcr = (data >> 8) & 0xff;
|
uart->vapi.lcr = (data >> 8) & 0xff;
|
break;
|
break;
|
case 0x03:
|
case 0x03:
|
uart->vapi.skew = (signed short)(data & 0xffff);
|
uart->vapi.skew = (signed short)(data & 0xffff);
|
break;
|
break;
|
case 0x04:
|
case 0x04:
|
if((data >> 16) & 1) {
|
if((data >> 16) & 1) {
|
/* If data & 0xffff is 0 then set the break imediatly and handle the
|
/* If data & 0xffff is 0 then set the break imediatly and handle the
|
* following commands as appropriate */
|
* following commands as appropriate */
|
if(!(data & 0xffff))
|
if(!(data & 0xffff))
|
uart_recv_break_start(uart);
|
uart_recv_break_start(uart);
|
else
|
else
|
/* Schedule a job to start sending breaks */
|
/* Schedule a job to start sending breaks */
|
SCHED_ADD(uart_recv_break_start, uart,
|
SCHED_ADD(uart_recv_break_start, uart,
|
(data & 0xffff) * UART_CLOCK_DIVIDER);
|
(data & 0xffff) * UART_CLOCK_DIVIDER);
|
} else {
|
} else {
|
/* If data & 0xffff is 0 then release the break imediatly and handle
|
/* If data & 0xffff is 0 then release the break imediatly and handle
|
* the following commands as appropriate */
|
* the following commands as appropriate */
|
if(!(data & 0xffff))
|
if(!(data & 0xffff))
|
uart_recv_break_stop(uart);
|
uart_recv_break_stop(uart);
|
else
|
else
|
/* Schedule a job to stop sending breaks */
|
/* Schedule a job to stop sending breaks */
|
SCHED_ADD(uart_recv_break_stop, uart,
|
SCHED_ADD(uart_recv_break_stop, uart,
|
(data & 0xffff) * UART_CLOCK_DIVIDER);
|
(data & 0xffff) * UART_CLOCK_DIVIDER);
|
}
|
}
|
break;
|
break;
|
default:
|
default:
|
WARN("WARNING: Invalid vapi command %02lx\n", data >> 24);
|
WARN("WARNING: Invalid vapi command %02lx\n", data >> 24);
|
break;
|
break;
|
}
|
}
|
} else break;
|
} else break;
|
}
|
}
|
}
|
}
|
|
|
/* Function that handles incoming VAPI data. */
|
/* Function that handles incoming VAPI data. */
|
void uart_vapi_read (unsigned long id, unsigned long data, void *dat)
|
void uart_vapi_read (unsigned long id, unsigned long data, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
TRACE("UART: id %08lx, data %08lx\n", id, data);
|
TRACE("UART: id %08lx, data %08lx\n", id, data);
|
uart->vapi_buf[uart->vapi_buf_head_ptr] = data;
|
uart->vapi_buf[uart->vapi_buf_head_ptr] = data;
|
uart->vapi_buf_head_ptr = (uart->vapi_buf_head_ptr + 1) % UART_VAPI_BUF_LEN;
|
uart->vapi_buf_head_ptr = (uart->vapi_buf_head_ptr + 1) % UART_VAPI_BUF_LEN;
|
if (uart->vapi_buf_tail_ptr == uart->vapi_buf_head_ptr) {
|
if (uart->vapi_buf_tail_ptr == uart->vapi_buf_head_ptr) {
|
fprintf (stderr, "FATAL: uart VAPI buffer to small.\n");
|
fprintf (stderr, "FATAL: uart VAPI buffer to small.\n");
|
exit (1);
|
exit (1);
|
}
|
}
|
if(!uart->istat.receiveing)
|
if(!uart->istat.receiveing)
|
uart_vapi_cmd(uart);
|
uart_vapi_cmd(uart);
|
}
|
}
|
|
|
/*--------------------------------------------------------[ Sim callbacks ]---*/
|
/*--------------------------------------------------------[ Sim callbacks ]---*/
|
/* Reset. It initializes all registers of all UART devices to zero values,
|
/* Reset. It initializes all registers of all UART devices to zero values,
|
* (re)opens all RX/TX file streams and places devices in memory address
|
* (re)opens all RX/TX file streams and places devices in memory address
|
* space. */
|
* space. */
|
void uart_reset(void *dat)
|
void uart_reset(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
|
|
if(uart->vapi_id) {
|
if(uart->vapi_id) {
|
vapi_install_handler(uart->vapi_id, uart_vapi_read, dat);
|
vapi_install_handler(uart->vapi_id, uart_vapi_read, dat);
|
} else if (uart->channel_str && uart->channel_str[0]) { /* Try to create stream. */
|
} else if (uart->channel_str && uart->channel_str[0]) { /* Try to create stream. */
|
if(uart->channel)
|
if(uart->channel)
|
channel_close(uart->channel);
|
channel_close(uart->channel);
|
else
|
else
|
uart->channel = channel_init(uart->channel_str);
|
uart->channel = channel_init(uart->channel_str);
|
if(channel_open(uart->channel) < 0) {
|
if(channel_open(uart->channel) < 0) {
|
WARN ("WARNING: problem with channel \"%s\" detected.\n", uart->channel_str);
|
WARN ("WARNING: problem with channel \"%s\" detected.\n", uart->channel_str);
|
} else if (config.sim.verbose)
|
} else if (config.sim.verbose)
|
PRINTF("UART at 0x%"PRIxADDR"\n", uart->baseaddr);
|
PRINTF("UART at 0x%"PRIxADDR"\n", uart->baseaddr);
|
} else {
|
} else {
|
WARN ("WARNING: UART at %"PRIxADDR" has no vapi nor channel specified\n",
|
WARN ("WARNING: UART at %"PRIxADDR" has no vapi nor channel specified\n",
|
uart->baseaddr);
|
uart->baseaddr);
|
}
|
}
|
|
|
if (uart->uart16550)
|
if (uart->uart16550)
|
uart->fifo_len = 16;
|
uart->fifo_len = 16;
|
else
|
else
|
uart->fifo_len = 1;
|
uart->fifo_len = 1;
|
|
|
uart->istat.rxbuf_head = uart->istat.rxbuf_tail = 0;
|
uart->istat.rxbuf_head = uart->istat.rxbuf_tail = 0;
|
uart->istat.txbuf_head = uart->istat.txbuf_tail = 0;
|
uart->istat.txbuf_head = uart->istat.txbuf_tail = 0;
|
|
|
uart->istat.txbuf_full = uart->istat.rxbuf_full = 0;
|
uart->istat.txbuf_full = uart->istat.rxbuf_full = 0;
|
|
|
uart->char_clks = 0;
|
uart->char_clks = 0;
|
|
|
uart->iregs.txser = 0;
|
uart->iregs.txser = 0;
|
uart->iregs.rxser = 0;
|
uart->iregs.rxser = 0;
|
uart->iregs.loopback = 0;
|
uart->iregs.loopback = 0;
|
uart->istat.receiveing = 0;
|
uart->istat.receiveing = 0;
|
uart->istat.recv_break = 0;
|
uart->istat.recv_break = 0;
|
uart->istat.ints = 0;
|
uart->istat.ints = 0;
|
|
|
memset(uart->regs.txbuf, 0, sizeof(uart->regs.txbuf));
|
memset(uart->regs.txbuf, 0, sizeof(uart->regs.txbuf));
|
memset(uart->regs.rxbuf, 0, sizeof(uart->regs.rxbuf));
|
memset(uart->regs.rxbuf, 0, sizeof(uart->regs.rxbuf));
|
|
|
uart->regs.dll = 0;
|
uart->regs.dll = 0;
|
uart->regs.dlh = 0;
|
uart->regs.dlh = 0;
|
uart->regs.ier = 0;
|
uart->regs.ier = 0;
|
uart->regs.iir = UART_IIR_NO_INT;
|
uart->regs.iir = UART_IIR_NO_INT;
|
uart->regs.fcr = 0;
|
uart->regs.fcr = 0;
|
uart->regs.lcr = UART_LCR_RESET;
|
uart->regs.lcr = UART_LCR_RESET;
|
uart->regs.mcr = 0;
|
uart->regs.mcr = 0;
|
uart->regs.lsr = UART_LSR_TXBUFE | UART_LSR_TXSERE;
|
uart->regs.lsr = UART_LSR_TXBUFE | UART_LSR_TXSERE;
|
uart->regs.msr = 0;
|
uart->regs.msr = 0;
|
uart->regs.scr = 0;
|
uart->regs.scr = 0;
|
|
|
uart->vapi.skew = 0;
|
uart->vapi.skew = 0;
|
uart->vapi.lcr = 0;
|
uart->vapi.lcr = 0;
|
uart->vapi.dll = 0;
|
uart->vapi.dll = 0;
|
uart->vapi.char_clks = 0;
|
uart->vapi.char_clks = 0;
|
|
|
uart->vapi_buf_head_ptr = 0;
|
uart->vapi_buf_head_ptr = 0;
|
uart->vapi_buf_tail_ptr = 0;
|
uart->vapi_buf_tail_ptr = 0;
|
memset(uart->vapi_buf, 0, sizeof(uart->vapi_buf));
|
memset(uart->vapi_buf, 0, sizeof(uart->vapi_buf));
|
|
|
uart_sched_recv_check(uart);
|
uart_sched_recv_check(uart);
|
}
|
}
|
|
|
/* Print register values on stdout. */
|
/* Print register values on stdout. */
|
void uart_status(void *dat)
|
void uart_status(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
int i;
|
int i;
|
|
|
PRINTF("\nUART visible registers at 0x%"PRIxADDR":\n", uart->baseaddr);
|
PRINTF("\nUART visible registers at 0x%"PRIxADDR":\n", uart->baseaddr);
|
PRINTF("RXBUF: ");
|
PRINTF("RXBUF: ");
|
for (i = uart->istat.rxbuf_head; i != uart->istat.rxbuf_tail; i = (i + 1) % uart->fifo_len)
|
for (i = uart->istat.rxbuf_head; i != uart->istat.rxbuf_tail; i = (i + 1) % uart->fifo_len)
|
PRINTF (" %.2x", uart->regs.rxbuf[i]);
|
PRINTF (" %.2x", uart->regs.rxbuf[i]);
|
PRINTF("TXBUF: ");
|
PRINTF("TXBUF: ");
|
for (i = uart->istat.txbuf_head; i != uart->istat.txbuf_tail; i = (i + 1) % uart->fifo_len)
|
for (i = uart->istat.txbuf_head; i != uart->istat.txbuf_tail; i = (i + 1) % uart->fifo_len)
|
PRINTF (" %.2x", uart->regs.txbuf[i]);
|
PRINTF (" %.2x", uart->regs.txbuf[i]);
|
PRINTF("\n");
|
PRINTF("\n");
|
PRINTF("DLL : %.2x DLH : %.2x\n", uart->regs.dll, uart->regs.dlh);
|
PRINTF("DLL : %.2x DLH : %.2x\n", uart->regs.dll, uart->regs.dlh);
|
PRINTF("IER : %.2x IIR : %.2x\n", uart->regs.ier, uart->regs.iir);
|
PRINTF("IER : %.2x IIR : %.2x\n", uart->regs.ier, uart->regs.iir);
|
PRINTF("LCR : %.2x MCR : %.2x\n", uart->regs.lcr, uart->regs.mcr);
|
PRINTF("LCR : %.2x MCR : %.2x\n", uart->regs.lcr, uart->regs.mcr);
|
PRINTF("LSR : %.2x MSR : %.2x\n", uart->regs.lsr, uart->regs.msr);
|
PRINTF("LSR : %.2x MSR : %.2x\n", uart->regs.lsr, uart->regs.msr);
|
PRINTF("SCR : %.2x\n", uart->regs.scr);
|
PRINTF("SCR : %.2x\n", uart->regs.scr);
|
|
|
PRINTF("\nInternal registers (sim debug):\n");
|
PRINTF("\nInternal registers (sim debug):\n");
|
PRINTF("RXSER: %.2"PRIx16" TXSER: %.2"PRIx8"\n", uart->iregs.rxser,
|
PRINTF("RXSER: %.2"PRIx16" TXSER: %.2"PRIx8"\n", uart->iregs.rxser,
|
uart->iregs.txser);
|
uart->iregs.txser);
|
|
|
PRINTF("\nInternal status (sim debug):\n");
|
PRINTF("\nInternal status (sim debug):\n");
|
PRINTF("char_clks: %ld\n", uart->char_clks);
|
PRINTF("char_clks: %ld\n", uart->char_clks);
|
PRINTF("rxbuf_full: %d txbuf_full: %d\n", uart->istat.rxbuf_full, uart->istat.txbuf_full);
|
PRINTF("rxbuf_full: %d txbuf_full: %d\n", uart->istat.rxbuf_full, uart->istat.txbuf_full);
|
PRINTF("Using IRQ%i\n", uart->irq);
|
PRINTF("Using IRQ%i\n", uart->irq);
|
if (uart->vapi_id)
|
if (uart->vapi_id)
|
PRINTF ("Connected to vapi ID=%lx\n\n", uart->vapi_id);
|
PRINTF ("Connected to vapi ID=%lx\n\n", uart->vapi_id);
|
/* TODO: replace by a channel_status
|
/* TODO: replace by a channel_status
|
else
|
else
|
PRINTF("RX fs: %p TX fs: %p\n\n", uart->rxfs, uart->txfs);
|
PRINTF("RX fs: %p TX fs: %p\n\n", uart->rxfs, uart->txfs);
|
*/
|
*/
|
}
|
}
|
|
|
/*---------------------------------------------------[ UART configuration ]---*/
|
/*---------------------------------------------------[ UART configuration ]---*/
|
void uart_baseaddr(union param_val val, void *dat)
|
void uart_baseaddr(union param_val val, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
uart->baseaddr = val.addr_val;
|
uart->baseaddr = val.addr_val;
|
}
|
}
|
|
|
void uart_jitter(union param_val val, void *dat)
|
void uart_jitter(union param_val val, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
uart->jitter = val.int_val;
|
uart->jitter = val.int_val;
|
}
|
}
|
|
|
void uart_irq(union param_val val, void *dat)
|
void uart_irq(union param_val val, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
uart->irq = val.int_val;
|
uart->irq = val.int_val;
|
}
|
}
|
|
|
void uart_16550(union param_val val, void *dat)
|
void uart_16550(union param_val val, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
uart->uart16550 = val.int_val;
|
uart->uart16550 = val.int_val;
|
}
|
}
|
|
|
void uart_channel(union param_val val, void *dat)
|
void uart_channel(union param_val val, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
if(!(uart->channel_str = strdup(val.str_val))) {
|
if(!(uart->channel_str = strdup(val.str_val))) {
|
fprintf(stderr, "Peripheral 16450: Run out of memory\n");
|
fprintf(stderr, "Peripheral 16450: Run out of memory\n");
|
exit(-1);
|
exit(-1);
|
}
|
}
|
}
|
}
|
|
|
void uart_newway(union param_val val, void *dat)
|
void uart_newway(union param_val val, void *dat)
|
{
|
{
|
CONFIG_ERROR(" txfile and rxfile and now obsolete.\n\tUse 'channel = \"file:rxfile,txfile\"' instead.");
|
CONFIG_ERROR(" txfile and rxfile and now obsolete.\n\tUse 'channel = \"file:rxfile,txfile\"' instead.");
|
exit(1);
|
exit(1);
|
}
|
}
|
|
|
void uart_vapi_id(union param_val val, void *dat)
|
void uart_vapi_id(union param_val val, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
uart->vapi_id = val.int_val;
|
uart->vapi_id = val.int_val;
|
}
|
}
|
|
|
void uart_enabled(union param_val val, void *dat)
|
void uart_enabled(union param_val val, void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
uart->enabled = val.int_val;
|
uart->enabled = val.int_val;
|
}
|
}
|
|
|
void *uart_sec_start(void)
|
void *uart_sec_start(void)
|
{
|
{
|
struct dev_16450 *new = malloc(sizeof(struct dev_16450));
|
struct dev_16450 *new = malloc(sizeof(struct dev_16450));
|
|
|
if(!new) {
|
if(!new) {
|
fprintf(stderr, "Peripheral 16450: Run out of memory\n");
|
fprintf(stderr, "Peripheral 16450: Run out of memory\n");
|
exit(-1);
|
exit(-1);
|
}
|
}
|
|
|
new->enabled = 1;
|
new->enabled = 1;
|
new->channel_str = NULL;
|
new->channel_str = NULL;
|
new->channel = NULL;
|
new->channel = NULL;
|
new->vapi_id = 0;
|
new->vapi_id = 0;
|
|
|
return new;
|
return new;
|
}
|
}
|
|
|
void uart_sec_end(void *dat)
|
void uart_sec_end(void *dat)
|
{
|
{
|
struct dev_16450 *uart = dat;
|
struct dev_16450 *uart = dat;
|
struct mem_ops ops;
|
struct mem_ops ops;
|
|
|
if(!uart->enabled) {
|
if(!uart->enabled) {
|
free(dat);
|
free(dat);
|
return;
|
return;
|
}
|
}
|
|
|
memset(&ops, 0, sizeof(struct mem_ops));
|
memset(&ops, 0, sizeof(struct mem_ops));
|
|
|
ops.readfunc8 = uart_read_byte;
|
ops.readfunc8 = uart_read_byte;
|
ops.writefunc8 = uart_write_byte;
|
ops.writefunc8 = uart_write_byte;
|
ops.read_dat8 = dat;
|
ops.read_dat8 = dat;
|
ops.write_dat8 = dat;
|
ops.write_dat8 = dat;
|
|
|
/* FIXME: What should these be? */
|
/* FIXME: What should these be? */
|
ops.delayr = 2;
|
ops.delayr = 2;
|
ops.delayw = 2;
|
ops.delayw = 2;
|
|
|
reg_mem_area(uart->baseaddr, UART_ADDR_SPACE, 0, &ops);
|
reg_mem_area(uart->baseaddr, UART_ADDR_SPACE, 0, &ops);
|
|
|
reg_sim_reset(uart_reset, dat);
|
reg_sim_reset(uart_reset, dat);
|
reg_sim_stat(uart_status, dat);
|
reg_sim_stat(uart_status, dat);
|
}
|
}
|
|
|
void reg_uart_sec(void)
|
void reg_uart_sec(void)
|
{
|
{
|
struct config_section *sec = reg_config_sec("uart", uart_sec_start,
|
struct config_section *sec = reg_config_sec("uart", uart_sec_start,
|
uart_sec_end);
|
uart_sec_end);
|
|
|
reg_config_param(sec, "baseaddr", paramt_addr, uart_baseaddr);
|
reg_config_param(sec, "baseaddr", paramt_addr, uart_baseaddr);
|
reg_config_param(sec, "enabled", paramt_int, uart_enabled);
|
reg_config_param(sec, "enabled", paramt_int, uart_enabled);
|
reg_config_param(sec, "irq", paramt_int, uart_irq);
|
reg_config_param(sec, "irq", paramt_int, uart_irq);
|
reg_config_param(sec, "16550", paramt_int, uart_16550);
|
reg_config_param(sec, "16550", paramt_int, uart_16550);
|
reg_config_param(sec, "jitter", paramt_int, uart_jitter);
|
reg_config_param(sec, "jitter", paramt_int, uart_jitter);
|
reg_config_param(sec, "channel", paramt_str, uart_channel);
|
reg_config_param(sec, "channel", paramt_str, uart_channel);
|
reg_config_param(sec, "txfile", paramt_str, uart_newway);
|
reg_config_param(sec, "txfile", paramt_str, uart_newway);
|
reg_config_param(sec, "rxfile", paramt_str, uart_newway);
|
reg_config_param(sec, "rxfile", paramt_str, uart_newway);
|
reg_config_param(sec, "vapi_id", paramt_int, uart_vapi_id);
|
reg_config_param(sec, "vapi_id", paramt_int, uart_vapi_id);
|
}
|
}
|
|
|