OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [config/] [w65/] [tm-w65.h] - Diff between revs 107 and 1765

Go to most recent revision | Only display areas with differences | Details | Blame | View Log

Rev 107 Rev 1765
/* Parameters for execution on a WDC 65816 machine.
/* Parameters for execution on a WDC 65816 machine.
   Copyright (C) 1995 Free Software Foundation, Inc.
   Copyright (C) 1995 Free Software Foundation, Inc.
 
 
   This file is part of GDB.
   This file is part of GDB.
 
 
   This program is free software; you can redistribute it and/or modify
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.
   (at your option) any later version.
 
 
   This program is distributed in the hope that it will be useful,
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   GNU General Public License for more details.
 
 
   You should have received a copy of the GNU General Public License
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   along with this program; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place - Suite 330,
   Foundation, Inc., 59 Temple Place - Suite 330,
   Boston, MA 02111-1307, USA.  */
   Boston, MA 02111-1307, USA.  */
 
 
/* Contributed by Steve Chamberlain sac@cygnus.com */
/* Contributed by Steve Chamberlain sac@cygnus.com */
 
 
#define GDB_TARGET_IS_W65
#define GDB_TARGET_IS_W65
 
 
#define IEEE_FLOAT 1
#define IEEE_FLOAT 1
 
 
/* Define the bit, byte, and word ordering of the machine.  */
/* Define the bit, byte, and word ordering of the machine.  */
 
 
#define TARGET_BYTE_ORDER LITTLE_ENDIAN
#define TARGET_BYTE_ORDER LITTLE_ENDIAN
 
 
 
 
/* Offset from address of function to start of its code.
/* Offset from address of function to start of its code.
   Zero on most machines.  */
   Zero on most machines.  */
 
 
#define FUNCTION_START_OFFSET 0
#define FUNCTION_START_OFFSET 0
 
 
/* Advance PC across any function entry prologue instructions
/* Advance PC across any function entry prologue instructions
   to reach some "real" code.  */
   to reach some "real" code.  */
 
 
extern CORE_ADDR w65_skip_prologue ();
extern CORE_ADDR w65_skip_prologue ();
 
 
#define SKIP_PROLOGUE(ip) \
#define SKIP_PROLOGUE(ip) \
    {(ip) = w65_skip_prologue(ip);}
    {(ip) = w65_skip_prologue(ip);}
 
 
 
 
/* Immediately after a function call, return the saved pc.
/* Immediately after a function call, return the saved pc.
   Can't always go through the frames for this because on some machines
   Can't always go through the frames for this because on some machines
   the new frame is not set up until the new function executes
   the new frame is not set up until the new function executes
   some instructions.
   some instructions.
 
 
   The return address is the value saved in the PR register + 4  */
   The return address is the value saved in the PR register + 4  */
 
 
#define SAVED_PC_AFTER_CALL(frame) \
#define SAVED_PC_AFTER_CALL(frame) \
  saved_pc_after_call(frame)
  saved_pc_after_call(frame)
 
 
 
 
/* Stack grows downward.  */
/* Stack grows downward.  */
 
 
#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
 
 
/* Illegal instruction - used by the simulator for breakpoint
/* Illegal instruction - used by the simulator for breakpoint
   detection */
   detection */
 
 
#define BREAKPOINT {0xcb}       /* WAI */
#define BREAKPOINT {0xcb}       /* WAI */
 
 
/* If your kernel resets the pc after the trap happens you may need to
/* If your kernel resets the pc after the trap happens you may need to
   define this before including this file.  */
   define this before including this file.  */
#define DECR_PC_AFTER_BREAK 0
#define DECR_PC_AFTER_BREAK 0
 
 
/* Return 1 if P points to an invalid floating point value.  */
/* Return 1 if P points to an invalid floating point value.  */
 
 
#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */
#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */
 
 
/* Say how long registers are.  */
/* Say how long registers are.  */
/*#define REGISTER_TYPE  int */
/*#define REGISTER_TYPE  int */
 
 
/* Say how much memory is needed to store a copy of the register set */
/* Say how much memory is needed to store a copy of the register set */
#define REGISTER_BYTES    (NUM_REGS*4)
#define REGISTER_BYTES    (NUM_REGS*4)
 
 
/* Index within `registers' of the first byte of the space for
/* Index within `registers' of the first byte of the space for
   register N.  */
   register N.  */
 
 
#define REGISTER_BYTE(N)  ((N)*4)
#define REGISTER_BYTE(N)  ((N)*4)
 
 
/* Number of bytes of storage in the actual machine representation
/* Number of bytes of storage in the actual machine representation
   for register N.  */
   for register N.  */
 
 
#define REGISTER_RAW_SIZE(N)     (((N) < 16) ? 2 : 4)
#define REGISTER_RAW_SIZE(N)     (((N) < 16) ? 2 : 4)
 
 
#define REGISTER_VIRTUAL_SIZE(N)  REGISTER_RAW_SIZE(N)
#define REGISTER_VIRTUAL_SIZE(N)  REGISTER_RAW_SIZE(N)
 
 
/* Largest value REGISTER_RAW_SIZE can have.  */
/* Largest value REGISTER_RAW_SIZE can have.  */
 
 
#define MAX_REGISTER_RAW_SIZE 4
#define MAX_REGISTER_RAW_SIZE 4
 
 
/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
 
 
#define MAX_REGISTER_VIRTUAL_SIZE 4
#define MAX_REGISTER_VIRTUAL_SIZE 4
 
 
/* Return the GDB type object for the "standard" data type
/* Return the GDB type object for the "standard" data type
   of data in register N.  */
   of data in register N.  */
 
 
#define REGISTER_VIRTUAL_TYPE(N) \
#define REGISTER_VIRTUAL_TYPE(N) \
  (REGISTER_VIRTUAL_SIZE(N) == 2 ? builtin_type_unsigned_short : builtin_type_unsigned_long)
  (REGISTER_VIRTUAL_SIZE(N) == 2 ? builtin_type_unsigned_short : builtin_type_unsigned_long)
 
 
/* Initializer for an array of names of registers.
/* Initializer for an array of names of registers.
   Entries beyond the first NUM_REGS are ignored.  */
   Entries beyond the first NUM_REGS are ignored.  */
 
 
#define REGISTER_NAMES \
#define REGISTER_NAMES \
  {"r0","r1","r2", "r3", "r4", "r5", "r6", "r7",  \
  {"r0","r1","r2", "r3", "r4", "r5", "r6", "r7",  \
   "r8","r9","r10","r11","r12","r13","r14","r15", \
   "r8","r9","r10","r11","r12","r13","r14","r15", \
   "pc","a", "x",  "y",  "dbr","d",  "s",  "p",   \
   "pc","a", "x",  "y",  "dbr","d",  "s",  "p",   \
   "ticks","cycles","insts"}
   "ticks","cycles","insts"}
 
 
/* Register numbers of various important registers.
/* Register numbers of various important registers.
   Note that some of these values are "real" register numbers,
   Note that some of these values are "real" register numbers,
   and correspond to the general registers of the machine,
   and correspond to the general registers of the machine,
   and some are "phony" register numbers which are too large
   and some are "phony" register numbers which are too large
   to be actual register numbers as far as the user is concerned
   to be actual register numbers as far as the user is concerned
   but do serve to get the desired values when passed to read_register.  */
   but do serve to get the desired values when passed to read_register.  */
 
 
#define SP_REGNUM  22
#define SP_REGNUM  22
#define FP_REGNUM  15
#define FP_REGNUM  15
#define NUM_REGS   27
#define NUM_REGS   27
#define PC_REGNUM  16
#define PC_REGNUM  16
#define P_REGNUM   23
#define P_REGNUM   23
 
 
/* Store the address of the place in which to copy the structure the
/* Store the address of the place in which to copy the structure the
   subroutine will return.  This is called from call_function.
   subroutine will return.  This is called from call_function.
 
 
   We store structs through a pointer passed in R4 */
   We store structs through a pointer passed in R4 */
 
 
#define STORE_STRUCT_RETURN(ADDR, SP) \
#define STORE_STRUCT_RETURN(ADDR, SP) \
    { write_register (4, (ADDR));  }
    { write_register (4, (ADDR));  }
 
 
/* Extract from an array REGBUF containing the (raw) register state
/* Extract from an array REGBUF containing the (raw) register state
   a function return value of type TYPE, and copy that, in virtual format,
   a function return value of type TYPE, and copy that, in virtual format,
   into VALBUF.  */
   into VALBUF.  */
 
 
#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
  memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))
  memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))
 
 
 
 
/* Write into appropriate registers a function return value
/* Write into appropriate registers a function return value
   of type TYPE, given in virtual format.
   of type TYPE, given in virtual format.
 
 
   Things always get returned in R4/R5 */
   Things always get returned in R4/R5 */
 
 
#define STORE_RETURN_VALUE(TYPE,VALBUF) \
#define STORE_RETURN_VALUE(TYPE,VALBUF) \
  write_register_bytes (REGISTER_BYTE(4), VALBUF, TYPE_LENGTH (TYPE))
  write_register_bytes (REGISTER_BYTE(4), VALBUF, TYPE_LENGTH (TYPE))
 
 
 
 
/* Extract from an array REGBUF containing the (raw) register state
/* Extract from an array REGBUF containing the (raw) register state
   the address in which a function should return its structure value,
   the address in which a function should return its structure value,
   as a CORE_ADDR (or an expression that can be used as one).  */
   as a CORE_ADDR (or an expression that can be used as one).  */
 
 
#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
 
 
/* A macro that tells us whether the function invocation represented
/* A macro that tells us whether the function invocation represented
   by FI does not have a frame on the stack associated with it.  If it
   by FI does not have a frame on the stack associated with it.  If it
   does not, FRAMELESS is set to 1, else 0.  */
   does not, FRAMELESS is set to 1, else 0.  */
 
 
#define FRAMELESS_FUNCTION_INVOCATION(FI) \
#define FRAMELESS_FUNCTION_INVOCATION(FI) \
  (frameless_look_for_prologue (FI))
  (frameless_look_for_prologue (FI))
 
 
#define FRAME_CHAIN(FRAME)       w65_frame_chain(FRAME)
#define FRAME_CHAIN(FRAME)       w65_frame_chain(FRAME)
#define FRAME_SAVED_PC(FRAME)    (w65_frame_saved_pc(FRAME))
#define FRAME_SAVED_PC(FRAME)    (w65_frame_saved_pc(FRAME))
#define FRAME_ARGS_ADDRESS(fi)   (fi)->frame
#define FRAME_ARGS_ADDRESS(fi)   (fi)->frame
#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
 
 
/* Set VAL to the number of args passed to frame described by FI.
/* Set VAL to the number of args passed to frame described by FI.
   Can set VAL to -1, meaning no way to tell.  */
   Can set VAL to -1, meaning no way to tell.  */
 
 
/* We can't tell how many args there are */
/* We can't tell how many args there are */
 
 
#define FRAME_NUM_ARGS(fi) (-1)
#define FRAME_NUM_ARGS(fi) (-1)
 
 
/* Return number of bytes at start of arglist that are not really args.  */
/* Return number of bytes at start of arglist that are not really args.  */
 
 
#define FRAME_ARGS_SKIP 0
#define FRAME_ARGS_SKIP 0
 
 
/* Put here the code to store, into a struct frame_saved_regs,
/* Put here the code to store, into a struct frame_saved_regs,
   the addresses of the saved registers of frame described by FRAME_INFO.
   the addresses of the saved registers of frame described by FRAME_INFO.
   This includes special registers such as pc and fp saved in special
   This includes special registers such as pc and fp saved in special
   ways in the stack frame.  sp is even more special:
   ways in the stack frame.  sp is even more special:
   the address we return for it IS the sp for the next frame.  */
   the address we return for it IS the sp for the next frame.  */
 
 
#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)         \
#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)         \
   frame_find_saved_regs(frame_info, &(frame_saved_regs))
   frame_find_saved_regs(frame_info, &(frame_saved_regs))
 
 
typedef unsigned short INSN_WORD;
typedef unsigned short INSN_WORD;
 
 
extern CORE_ADDR w65_addr_bits_remove PARAMS ((CORE_ADDR));
extern CORE_ADDR w65_addr_bits_remove PARAMS ((CORE_ADDR));
#define ADDR_BITS_REMOVE(addr) w65_addr_bits_remove (addr)
#define ADDR_BITS_REMOVE(addr) w65_addr_bits_remove (addr)
 
 
#define CALL_DUMMY_LENGTH 10
#define CALL_DUMMY_LENGTH 10
 
 
/* Discard from the stack the innermost frame,
/* Discard from the stack the innermost frame,
   restoring all saved registers.  */
   restoring all saved registers.  */
 
 
#define POP_FRAME pop_frame();
#define POP_FRAME pop_frame();
 
 
 
 
#define NOP   {0xea}
#define NOP   {0xea}
 
 
#define REGISTER_SIZE 4
#define REGISTER_SIZE 4
 
 
#define PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
#define PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
 
 
#define TARGET_INT_BIT  16
#define TARGET_INT_BIT  16
#define TARGET_LONG_BIT 32
#define TARGET_LONG_BIT 32
#define TARGET_PTR_BIT  32
#define TARGET_PTR_BIT  32
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.