OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [doc/] [stabs.info-2] - Diff between revs 363 and 1765

Only display areas with differences | Details | Blame | View Log

Rev 363 Rev 1765
This is stabs.info, produced by makeinfo version 4.0 from
This is stabs.info, produced by makeinfo version 4.0 from
./stabs.texinfo.
./stabs.texinfo.
START-INFO-DIR-ENTRY
START-INFO-DIR-ENTRY
* Stabs: (stabs).                 The "stabs" debugging information format.
* Stabs: (stabs).                 The "stabs" debugging information format.
END-INFO-DIR-ENTRY
END-INFO-DIR-ENTRY
   This document describes the stabs debugging symbol tables.
   This document describes the stabs debugging symbol tables.
   Copyright 1992, 93, 94, 95, 97, 1998 Free Software Foundation, Inc.
   Copyright 1992, 93, 94, 95, 97, 1998 Free Software Foundation, Inc.
Contributed by Cygnus Support.  Written by Julia Menapace, Jim Kingdon,
Contributed by Cygnus Support.  Written by Julia Menapace, Jim Kingdon,
and David MacKenzie.
and David MacKenzie.
   Permission is granted to make and distribute verbatim copies of this
   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
manual provided the copyright notice and this permission notice are
preserved on all copies.
preserved on all copies.
   Permission is granted to copy or distribute modified versions of this
   Permission is granted to copy or distribute modified versions of this
manual under the terms of the GPL (for which purpose this text may be
manual under the terms of the GPL (for which purpose this text may be
regarded as a program in the language TeX).
regarded as a program in the language TeX).


File: stabs.info,  Node: Conformant Arrays,  Prev: Reference Parameters,  Up: Parameters
File: stabs.info,  Node: Conformant Arrays,  Prev: Reference Parameters,  Up: Parameters
Passing Conformant Array Parameters
Passing Conformant Array Parameters
-----------------------------------
-----------------------------------
   Conformant arrays are a feature of Modula-2, and perhaps other
   Conformant arrays are a feature of Modula-2, and perhaps other
languages, in which the size of an array parameter is not known to the
languages, in which the size of an array parameter is not known to the
called function until run-time.  Such parameters have two stabs: a `x'
called function until run-time.  Such parameters have two stabs: a `x'
for the array itself, and a `C', which represents the size of the
for the array itself, and a `C', which represents the size of the
array.  The value of the `x' stab is the offset in the argument list
array.  The value of the `x' stab is the offset in the argument list
where the address of the array is stored (it this right?  it is a
where the address of the array is stored (it this right?  it is a
guess); the value of the `C' stab is the offset in the argument list
guess); the value of the `C' stab is the offset in the argument list
where the size of the array (in elements? in bytes?) is stored.
where the size of the array (in elements? in bytes?) is stored.


File: stabs.info,  Node: Types,  Next: Symbol Tables,  Prev: Variables,  Up: Top
File: stabs.info,  Node: Types,  Next: Symbol Tables,  Prev: Variables,  Up: Top
Defining Types
Defining Types
**************
**************
   The examples so far have described types as references to previously
   The examples so far have described types as references to previously
defined types, or defined in terms of subranges of or pointers to
defined types, or defined in terms of subranges of or pointers to
previously defined types.  This chapter describes the other type
previously defined types.  This chapter describes the other type
descriptors that may follow the `=' in a type definition.
descriptors that may follow the `=' in a type definition.
* Menu:
* Menu:
* Builtin Types::               Integers, floating point, void, etc.
* Builtin Types::               Integers, floating point, void, etc.
* Miscellaneous Types::         Pointers, sets, files, etc.
* Miscellaneous Types::         Pointers, sets, files, etc.
* Cross-References::            Referring to a type not yet defined.
* Cross-References::            Referring to a type not yet defined.
* Subranges::                   A type with a specific range.
* Subranges::                   A type with a specific range.
* Arrays::                      An aggregate type of same-typed elements.
* Arrays::                      An aggregate type of same-typed elements.
* Strings::                     Like an array but also has a length.
* Strings::                     Like an array but also has a length.
* Enumerations::                Like an integer but the values have names.
* Enumerations::                Like an integer but the values have names.
* Structures::                  An aggregate type of different-typed elements.
* Structures::                  An aggregate type of different-typed elements.
* Typedefs::                    Giving a type a name.
* Typedefs::                    Giving a type a name.
* Unions::                      Different types sharing storage.
* Unions::                      Different types sharing storage.
* Function Types::
* Function Types::


File: stabs.info,  Node: Builtin Types,  Next: Miscellaneous Types,  Up: Types
File: stabs.info,  Node: Builtin Types,  Next: Miscellaneous Types,  Up: Types
Builtin Types
Builtin Types
=============
=============
   Certain types are built in (`int', `short', `void', `float', etc.);
   Certain types are built in (`int', `short', `void', `float', etc.);
the debugger recognizes these types and knows how to handle them.
the debugger recognizes these types and knows how to handle them.
Thus, don't be surprised if some of the following ways of specifying
Thus, don't be surprised if some of the following ways of specifying
builtin types do not specify everything that a debugger would need to
builtin types do not specify everything that a debugger would need to
know about the type--in some cases they merely specify enough
know about the type--in some cases they merely specify enough
information to distinguish the type from other types.
information to distinguish the type from other types.
   The traditional way to define builtin types is convolunted, so new
   The traditional way to define builtin types is convolunted, so new
ways have been invented to describe them.  Sun's `acc' uses special
ways have been invented to describe them.  Sun's `acc' uses special
builtin type descriptors (`b' and `R'), and IBM uses negative type
builtin type descriptors (`b' and `R'), and IBM uses negative type
numbers.  GDB accepts all three ways, as of version 4.8; dbx just
numbers.  GDB accepts all three ways, as of version 4.8; dbx just
accepts the traditional builtin types and perhaps one of the other two
accepts the traditional builtin types and perhaps one of the other two
formats.  The following sections describe each of these formats.
formats.  The following sections describe each of these formats.
* Menu:
* Menu:
* Traditional Builtin Types::   Put on your seatbelts and prepare for kludgery
* Traditional Builtin Types::   Put on your seatbelts and prepare for kludgery
* Builtin Type Descriptors::    Builtin types with special type descriptors
* Builtin Type Descriptors::    Builtin types with special type descriptors
* Negative Type Numbers::       Builtin types using negative type numbers
* Negative Type Numbers::       Builtin types using negative type numbers


File: stabs.info,  Node: Traditional Builtin Types,  Next: Builtin Type Descriptors,  Up: Builtin Types
File: stabs.info,  Node: Traditional Builtin Types,  Next: Builtin Type Descriptors,  Up: Builtin Types
Traditional Builtin Types
Traditional Builtin Types
-------------------------
-------------------------
   This is the traditional, convoluted method for defining builtin
   This is the traditional, convoluted method for defining builtin
types.  There are several classes of such type definitions: integer,
types.  There are several classes of such type definitions: integer,
floating point, and `void'.
floating point, and `void'.
* Menu:
* Menu:
* Traditional Integer Types::
* Traditional Integer Types::
* Traditional Other Types::
* Traditional Other Types::


File: stabs.info,  Node: Traditional Integer Types,  Next: Traditional Other Types,  Up: Traditional Builtin Types
File: stabs.info,  Node: Traditional Integer Types,  Next: Traditional Other Types,  Up: Traditional Builtin Types
Traditional Integer Types
Traditional Integer Types
.........................
.........................
   Often types are defined as subranges of themselves.  If the bounding
   Often types are defined as subranges of themselves.  If the bounding
values fit within an `int', then they are given normally.  For example:
values fit within an `int', then they are given normally.  For example:
     .stabs "int:t1=r1;-2147483648;2147483647;",128,0,0,0    # 128 is N_LSYM
     .stabs "int:t1=r1;-2147483648;2147483647;",128,0,0,0    # 128 is N_LSYM
     .stabs "char:t2=r2;0;127;",128,0,0,0
     .stabs "char:t2=r2;0;127;",128,0,0,0
   Builtin types can also be described as subranges of `int':
   Builtin types can also be described as subranges of `int':
     .stabs "unsigned short:t6=r1;0;65535;",128,0,0,0
     .stabs "unsigned short:t6=r1;0;65535;",128,0,0,0
   If the lower bound of a subrange is 0 and the upper bound is -1, the
   If the lower bound of a subrange is 0 and the upper bound is -1, the
type is an unsigned integral type whose bounds are too big to describe
type is an unsigned integral type whose bounds are too big to describe
in an `int'.  Traditionally this is only used for `unsigned int' and
in an `int'.  Traditionally this is only used for `unsigned int' and
`unsigned long':
`unsigned long':
     .stabs "unsigned int:t4=r1;0;-1;",128,0,0,0
     .stabs "unsigned int:t4=r1;0;-1;",128,0,0,0
   For larger types, GCC 2.4.5 puts out bounds in octal, with one or
   For larger types, GCC 2.4.5 puts out bounds in octal, with one or
more leading zeroes.  In this case a negative bound consists of a number
more leading zeroes.  In this case a negative bound consists of a number
which is a 1 bit (for the sign bit) followed by a 0 bit for each bit in
which is a 1 bit (for the sign bit) followed by a 0 bit for each bit in
the number (except the sign bit), and a positive bound is one which is a
the number (except the sign bit), and a positive bound is one which is a
1 bit for each bit in the number (except possibly the sign bit).  All
1 bit for each bit in the number (except possibly the sign bit).  All
known versions of dbx and GDB version 4 accept this (at least in the
known versions of dbx and GDB version 4 accept this (at least in the
sense of not refusing to process the file), but GDB 3.5 refuses to read
sense of not refusing to process the file), but GDB 3.5 refuses to read
the whole file containing such symbols.  So GCC 2.3.3 did not output the
the whole file containing such symbols.  So GCC 2.3.3 did not output the
proper size for these types.  As an example of octal bounds, the string
proper size for these types.  As an example of octal bounds, the string
fields of the stabs for 64 bit integer types look like:
fields of the stabs for 64 bit integer types look like:
     long int:t3=r1;001000000000000000000000;000777777777777777777777;
     long int:t3=r1;001000000000000000000000;000777777777777777777777;
     long unsigned int:t5=r1;000000000000000000000000;001777777777777777777777;
     long unsigned int:t5=r1;000000000000000000000000;001777777777777777777777;
   If the lower bound of a subrange is 0 and the upper bound is
   If the lower bound of a subrange is 0 and the upper bound is
negative, the type is an unsigned integral type whose size in bytes is
negative, the type is an unsigned integral type whose size in bytes is
the absolute value of the upper bound.  I believe this is a Convex
the absolute value of the upper bound.  I believe this is a Convex
convention for `unsigned long long'.
convention for `unsigned long long'.
   If the lower bound of a subrange is negative and the upper bound is
   If the lower bound of a subrange is negative and the upper bound is
0, the type is a signed integral type whose size in bytes is the
0, the type is a signed integral type whose size in bytes is the
absolute value of the lower bound.  I believe this is a Convex
absolute value of the lower bound.  I believe this is a Convex
convention for `long long'.  To distinguish this from a legitimate
convention for `long long'.  To distinguish this from a legitimate
subrange, the type should be a subrange of itself.  I'm not sure whether
subrange, the type should be a subrange of itself.  I'm not sure whether
this is the case for Convex.
this is the case for Convex.


File: stabs.info,  Node: Traditional Other Types,  Prev: Traditional Integer Types,  Up: Traditional Builtin Types
File: stabs.info,  Node: Traditional Other Types,  Prev: Traditional Integer Types,  Up: Traditional Builtin Types
Traditional Other Types
Traditional Other Types
.......................
.......................
   If the upper bound of a subrange is 0 and the lower bound is
   If the upper bound of a subrange is 0 and the lower bound is
positive, the type is a floating point type, and the lower bound of the
positive, the type is a floating point type, and the lower bound of the
subrange indicates the number of bytes in the type:
subrange indicates the number of bytes in the type:
     .stabs "float:t12=r1;4;0;",128,0,0,0
     .stabs "float:t12=r1;4;0;",128,0,0,0
     .stabs "double:t13=r1;8;0;",128,0,0,0
     .stabs "double:t13=r1;8;0;",128,0,0,0
   However, GCC writes `long double' the same way it writes `double',
   However, GCC writes `long double' the same way it writes `double',
so there is no way to distinguish.
so there is no way to distinguish.
     .stabs "long double:t14=r1;8;0;",128,0,0,0
     .stabs "long double:t14=r1;8;0;",128,0,0,0
   Complex types are defined the same way as floating-point types;
   Complex types are defined the same way as floating-point types;
there is no way to distinguish a single-precision complex from a
there is no way to distinguish a single-precision complex from a
double-precision floating-point type.
double-precision floating-point type.
   The C `void' type is defined as itself:
   The C `void' type is defined as itself:
     .stabs "void:t15=15",128,0,0,0
     .stabs "void:t15=15",128,0,0,0
   I'm not sure how a boolean type is represented.
   I'm not sure how a boolean type is represented.


File: stabs.info,  Node: Builtin Type Descriptors,  Next: Negative Type Numbers,  Prev: Traditional Builtin Types,  Up: Builtin Types
File: stabs.info,  Node: Builtin Type Descriptors,  Next: Negative Type Numbers,  Prev: Traditional Builtin Types,  Up: Builtin Types
Defining Builtin Types Using Builtin Type Descriptors
Defining Builtin Types Using Builtin Type Descriptors
-----------------------------------------------------
-----------------------------------------------------
   This is the method used by Sun's `acc' for defining builtin types.
   This is the method used by Sun's `acc' for defining builtin types.
These are the type descriptors to define builtin types:
These are the type descriptors to define builtin types:
`b SIGNED CHAR-FLAG WIDTH ; OFFSET ; NBITS ;'
`b SIGNED CHAR-FLAG WIDTH ; OFFSET ; NBITS ;'
     Define an integral type.  SIGNED is `u' for unsigned or `s' for
     Define an integral type.  SIGNED is `u' for unsigned or `s' for
     signed.  CHAR-FLAG is `c' which indicates this is a character
     signed.  CHAR-FLAG is `c' which indicates this is a character
     type, or is omitted.  I assume this is to distinguish an integral
     type, or is omitted.  I assume this is to distinguish an integral
     type from a character type of the same size, for example it might
     type from a character type of the same size, for example it might
     make sense to set it for the C type `wchar_t' so the debugger can
     make sense to set it for the C type `wchar_t' so the debugger can
     print such variables differently (Solaris does not do this).  Sun
     print such variables differently (Solaris does not do this).  Sun
     sets it on the C types `signed char' and `unsigned char' which
     sets it on the C types `signed char' and `unsigned char' which
     arguably is wrong.  WIDTH and OFFSET appear to be for small
     arguably is wrong.  WIDTH and OFFSET appear to be for small
     objects stored in larger ones, for example a `short' in an `int'
     objects stored in larger ones, for example a `short' in an `int'
     register.  WIDTH is normally the number of bytes in the type.
     register.  WIDTH is normally the number of bytes in the type.
     OFFSET seems to always be zero.  NBITS is the number of bits in
     OFFSET seems to always be zero.  NBITS is the number of bits in
     the type.
     the type.
     Note that type descriptor `b' used for builtin types conflicts with
     Note that type descriptor `b' used for builtin types conflicts with
     its use for Pascal space types (*note Miscellaneous Types::); they
     its use for Pascal space types (*note Miscellaneous Types::); they
     can be distinguished because the character following the type
     can be distinguished because the character following the type
     descriptor will be a digit, `(', or `-' for a Pascal space type, or
     descriptor will be a digit, `(', or `-' for a Pascal space type, or
     `u' or `s' for a builtin type.
     `u' or `s' for a builtin type.
`w'
`w'
     Documented by AIX to define a wide character type, but their
     Documented by AIX to define a wide character type, but their
     compiler actually uses negative type numbers (*note Negative Type
     compiler actually uses negative type numbers (*note Negative Type
     Numbers::).
     Numbers::).
`R FP-TYPE ; BYTES ;'
`R FP-TYPE ; BYTES ;'
     Define a floating point type.  FP-TYPE has one of the following
     Define a floating point type.  FP-TYPE has one of the following
     values:
     values:
    `1 (NF_SINGLE)'
    `1 (NF_SINGLE)'
          IEEE 32-bit (single precision) floating point format.
          IEEE 32-bit (single precision) floating point format.
    `2 (NF_DOUBLE)'
    `2 (NF_DOUBLE)'
          IEEE 64-bit (double precision) floating point format.
          IEEE 64-bit (double precision) floating point format.
    `3 (NF_COMPLEX)'
    `3 (NF_COMPLEX)'
    `4 (NF_COMPLEX16)'
    `4 (NF_COMPLEX16)'
    `5 (NF_COMPLEX32)'
    `5 (NF_COMPLEX32)'
          These are for complex numbers.  A comment in the GDB source
          These are for complex numbers.  A comment in the GDB source
          describes them as Fortran `complex', `double complex', and
          describes them as Fortran `complex', `double complex', and
          `complex*16', respectively, but what does that mean?  (i.e.,
          `complex*16', respectively, but what does that mean?  (i.e.,
          Single precision?  Double precison?).
          Single precision?  Double precison?).
    `6 (NF_LDOUBLE)'
    `6 (NF_LDOUBLE)'
          Long double.  This should probably only be used for Sun format
          Long double.  This should probably only be used for Sun format
          `long double', and new codes should be used for other floating
          `long double', and new codes should be used for other floating
          point formats (`NF_DOUBLE' can be used if a `long double' is
          point formats (`NF_DOUBLE' can be used if a `long double' is
          really just an IEEE double, of course).
          really just an IEEE double, of course).
     BYTES is the number of bytes occupied by the type.  This allows a
     BYTES is the number of bytes occupied by the type.  This allows a
     debugger to perform some operations with the type even if it
     debugger to perform some operations with the type even if it
     doesn't understand FP-TYPE.
     doesn't understand FP-TYPE.
`g TYPE-INFORMATION ; NBITS'
`g TYPE-INFORMATION ; NBITS'
     Documented by AIX to define a floating type, but their compiler
     Documented by AIX to define a floating type, but their compiler
     actually uses negative type numbers (*note Negative Type
     actually uses negative type numbers (*note Negative Type
     Numbers::).
     Numbers::).
`c TYPE-INFORMATION ; NBITS'
`c TYPE-INFORMATION ; NBITS'
     Documented by AIX to define a complex type, but their compiler
     Documented by AIX to define a complex type, but their compiler
     actually uses negative type numbers (*note Negative Type
     actually uses negative type numbers (*note Negative Type
     Numbers::).
     Numbers::).
   The C `void' type is defined as a signed integral type 0 bits long:
   The C `void' type is defined as a signed integral type 0 bits long:
     .stabs "void:t19=bs0;0;0",128,0,0,0
     .stabs "void:t19=bs0;0;0",128,0,0,0
   The Solaris compiler seems to omit the trailing semicolon in this
   The Solaris compiler seems to omit the trailing semicolon in this
case.  Getting sloppy in this way is not a swift move because if a type
case.  Getting sloppy in this way is not a swift move because if a type
is embedded in a more complex expression it is necessary to be able to
is embedded in a more complex expression it is necessary to be able to
tell where it ends.
tell where it ends.
   I'm not sure how a boolean type is represented.
   I'm not sure how a boolean type is represented.


File: stabs.info,  Node: Negative Type Numbers,  Prev: Builtin Type Descriptors,  Up: Builtin Types
File: stabs.info,  Node: Negative Type Numbers,  Prev: Builtin Type Descriptors,  Up: Builtin Types
Negative Type Numbers
Negative Type Numbers
---------------------
---------------------
   This is the method used in XCOFF for defining builtin types.  Since
   This is the method used in XCOFF for defining builtin types.  Since
the debugger knows about the builtin types anyway, the idea of negative
the debugger knows about the builtin types anyway, the idea of negative
type numbers is simply to give a special type number which indicates
type numbers is simply to give a special type number which indicates
the builtin type.  There is no stab defining these types.
the builtin type.  There is no stab defining these types.
   There are several subtle issues with negative type numbers.
   There are several subtle issues with negative type numbers.
   One is the size of the type.  A builtin type (for example the C types
   One is the size of the type.  A builtin type (for example the C types
`int' or `long') might have different sizes depending on compiler
`int' or `long') might have different sizes depending on compiler
options, the target architecture, the ABI, etc.  This issue doesn't
options, the target architecture, the ABI, etc.  This issue doesn't
come up for IBM tools since (so far) they just target the RS/6000; the
come up for IBM tools since (so far) they just target the RS/6000; the
sizes indicated below for each size are what the IBM RS/6000 tools use.
sizes indicated below for each size are what the IBM RS/6000 tools use.
To deal with differing sizes, either define separate negative type
To deal with differing sizes, either define separate negative type
numbers for each size (which works but requires changing the debugger,
numbers for each size (which works but requires changing the debugger,
and, unless you get both AIX dbx and GDB to accept the change,
and, unless you get both AIX dbx and GDB to accept the change,
introduces an incompatibility), or use a type attribute (*note String
introduces an incompatibility), or use a type attribute (*note String
Field::) to define a new type with the appropriate size (which merely
Field::) to define a new type with the appropriate size (which merely
requires a debugger which understands type attributes, like AIX dbx or
requires a debugger which understands type attributes, like AIX dbx or
GDB).  For example,
GDB).  For example,
     .stabs "boolean:t10=@s8;-16",128,0,0,0
     .stabs "boolean:t10=@s8;-16",128,0,0,0
   defines an 8-bit boolean type, and
   defines an 8-bit boolean type, and
     .stabs "boolean:t10=@s64;-16",128,0,0,0
     .stabs "boolean:t10=@s64;-16",128,0,0,0
   defines a 64-bit boolean type.
   defines a 64-bit boolean type.
   A similar issue is the format of the type.  This comes up most often
   A similar issue is the format of the type.  This comes up most often
for floating-point types, which could have various formats (particularly
for floating-point types, which could have various formats (particularly
extended doubles, which vary quite a bit even among IEEE systems).
extended doubles, which vary quite a bit even among IEEE systems).
Again, it is best to define a new negative type number for each
Again, it is best to define a new negative type number for each
different format; changing the format based on the target system has
different format; changing the format based on the target system has
various problems.  One such problem is that the Alpha has both VAX and
various problems.  One such problem is that the Alpha has both VAX and
IEEE floating types.  One can easily imagine one library using the VAX
IEEE floating types.  One can easily imagine one library using the VAX
types and another library in the same executable using the IEEE types.
types and another library in the same executable using the IEEE types.
Another example is that the interpretation of whether a boolean is true
Another example is that the interpretation of whether a boolean is true
or false can be based on the least significant bit, most significant
or false can be based on the least significant bit, most significant
bit, whether it is zero, etc., and different compilers (or different
bit, whether it is zero, etc., and different compilers (or different
options to the same compiler) might provide different kinds of boolean.
options to the same compiler) might provide different kinds of boolean.
   The last major issue is the names of the types.  The name of a given
   The last major issue is the names of the types.  The name of a given
type depends _only_ on the negative type number given; these do not
type depends _only_ on the negative type number given; these do not
vary depending on the language, the target system, or anything else.
vary depending on the language, the target system, or anything else.
One can always define separate type numbers--in the following list you
One can always define separate type numbers--in the following list you
will see for example separate `int' and `integer*4' types which are
will see for example separate `int' and `integer*4' types which are
identical except for the name.  But compatibility can be maintained by
identical except for the name.  But compatibility can be maintained by
not inventing new negative type numbers and instead just defining a new
not inventing new negative type numbers and instead just defining a new
type with a new name.  For example:
type with a new name.  For example:
     .stabs "CARDINAL:t10=-8",128,0,0,0
     .stabs "CARDINAL:t10=-8",128,0,0,0
   Here is the list of negative type numbers.  The phrase "integral
   Here is the list of negative type numbers.  The phrase "integral
type" is used to mean twos-complement (I strongly suspect that all
type" is used to mean twos-complement (I strongly suspect that all
machines which use stabs use twos-complement; most machines use
machines which use stabs use twos-complement; most machines use
twos-complement these days).
twos-complement these days).
`-1'
`-1'
     `int', 32 bit signed integral type.
     `int', 32 bit signed integral type.
`-2'
`-2'
     `char', 8 bit type holding a character.   Both GDB and dbx on AIX
     `char', 8 bit type holding a character.   Both GDB and dbx on AIX
     treat this as signed.  GCC uses this type whether `char' is signed
     treat this as signed.  GCC uses this type whether `char' is signed
     or not, which seems like a bad idea.  The AIX compiler (`xlc')
     or not, which seems like a bad idea.  The AIX compiler (`xlc')
     seems to avoid this type; it uses -5 instead for `char'.
     seems to avoid this type; it uses -5 instead for `char'.
`-3'
`-3'
     `short', 16 bit signed integral type.
     `short', 16 bit signed integral type.
`-4'
`-4'
     `long', 32 bit signed integral type.
     `long', 32 bit signed integral type.
`-5'
`-5'
     `unsigned char', 8 bit unsigned integral type.
     `unsigned char', 8 bit unsigned integral type.
`-6'
`-6'
     `signed char', 8 bit signed integral type.
     `signed char', 8 bit signed integral type.
`-7'
`-7'
     `unsigned short', 16 bit unsigned integral type.
     `unsigned short', 16 bit unsigned integral type.
`-8'
`-8'
     `unsigned int', 32 bit unsigned integral type.
     `unsigned int', 32 bit unsigned integral type.
`-9'
`-9'
     `unsigned', 32 bit unsigned integral type.
     `unsigned', 32 bit unsigned integral type.
`-10'
`-10'
     `unsigned long', 32 bit unsigned integral type.
     `unsigned long', 32 bit unsigned integral type.
`-11'
`-11'
     `void', type indicating the lack of a value.
     `void', type indicating the lack of a value.
`-12'
`-12'
     `float', IEEE single precision.
     `float', IEEE single precision.
`-13'
`-13'
     `double', IEEE double precision.
     `double', IEEE double precision.
`-14'
`-14'
     `long double', IEEE double precision.  The compiler claims the size
     `long double', IEEE double precision.  The compiler claims the size
     will increase in a future release, and for binary compatibility
     will increase in a future release, and for binary compatibility
     you have to avoid using `long double'.  I hope when they increase
     you have to avoid using `long double'.  I hope when they increase
     it they use a new negative type number.
     it they use a new negative type number.
`-15'
`-15'
     `integer'.  32 bit signed integral type.
     `integer'.  32 bit signed integral type.
`-16'
`-16'
     `boolean'.  32 bit type.  GDB and GCC assume that zero is false,
     `boolean'.  32 bit type.  GDB and GCC assume that zero is false,
     one is true, and other values have unspecified meaning.  I hope
     one is true, and other values have unspecified meaning.  I hope
     this agrees with how the IBM tools use the type.
     this agrees with how the IBM tools use the type.
`-17'
`-17'
     `short real'.  IEEE single precision.
     `short real'.  IEEE single precision.
`-18'
`-18'
     `real'.  IEEE double precision.
     `real'.  IEEE double precision.
`-19'
`-19'
     `stringptr'.  *Note Strings::.
     `stringptr'.  *Note Strings::.
`-20'
`-20'
     `character', 8 bit unsigned character type.
     `character', 8 bit unsigned character type.
`-21'
`-21'
     `logical*1', 8 bit type.  This Fortran type has a split
     `logical*1', 8 bit type.  This Fortran type has a split
     personality in that it is used for boolean variables, but can also
     personality in that it is used for boolean variables, but can also
     be used for unsigned integers.  0 is false, 1 is true, and other
     be used for unsigned integers.  0 is false, 1 is true, and other
     values are non-boolean.
     values are non-boolean.
`-22'
`-22'
     `logical*2', 16 bit type.  This Fortran type has a split
     `logical*2', 16 bit type.  This Fortran type has a split
     personality in that it is used for boolean variables, but can also
     personality in that it is used for boolean variables, but can also
     be used for unsigned integers.  0 is false, 1 is true, and other
     be used for unsigned integers.  0 is false, 1 is true, and other
     values are non-boolean.
     values are non-boolean.
`-23'
`-23'
     `logical*4', 32 bit type.  This Fortran type has a split
     `logical*4', 32 bit type.  This Fortran type has a split
     personality in that it is used for boolean variables, but can also
     personality in that it is used for boolean variables, but can also
     be used for unsigned integers.  0 is false, 1 is true, and other
     be used for unsigned integers.  0 is false, 1 is true, and other
     values are non-boolean.
     values are non-boolean.
`-24'
`-24'
     `logical', 32 bit type.  This Fortran type has a split personality
     `logical', 32 bit type.  This Fortran type has a split personality
     in that it is used for boolean variables, but can also be used for
     in that it is used for boolean variables, but can also be used for
     unsigned integers.  0 is false, 1 is true, and other values are
     unsigned integers.  0 is false, 1 is true, and other values are
     non-boolean.
     non-boolean.
`-25'
`-25'
     `complex'.  A complex type consisting of two IEEE single-precision
     `complex'.  A complex type consisting of two IEEE single-precision
     floating point values.
     floating point values.
`-26'
`-26'
     `complex'.  A complex type consisting of two IEEE double-precision
     `complex'.  A complex type consisting of two IEEE double-precision
     floating point values.
     floating point values.
`-27'
`-27'
     `integer*1', 8 bit signed integral type.
     `integer*1', 8 bit signed integral type.
`-28'
`-28'
     `integer*2', 16 bit signed integral type.
     `integer*2', 16 bit signed integral type.
`-29'
`-29'
     `integer*4', 32 bit signed integral type.
     `integer*4', 32 bit signed integral type.
`-30'
`-30'
     `wchar'.  Wide character, 16 bits wide, unsigned (what format?
     `wchar'.  Wide character, 16 bits wide, unsigned (what format?
     Unicode?).
     Unicode?).
`-31'
`-31'
     `long long', 64 bit signed integral type.
     `long long', 64 bit signed integral type.
`-32'
`-32'
     `unsigned long long', 64 bit unsigned integral type.
     `unsigned long long', 64 bit unsigned integral type.
`-33'
`-33'
     `logical*8', 64 bit unsigned integral type.
     `logical*8', 64 bit unsigned integral type.
`-34'
`-34'
     `integer*8', 64 bit signed integral type.
     `integer*8', 64 bit signed integral type.


File: stabs.info,  Node: Miscellaneous Types,  Next: Cross-References,  Prev: Builtin Types,  Up: Types
File: stabs.info,  Node: Miscellaneous Types,  Next: Cross-References,  Prev: Builtin Types,  Up: Types
Miscellaneous Types
Miscellaneous Types
===================
===================
`b TYPE-INFORMATION ; BYTES'
`b TYPE-INFORMATION ; BYTES'
     Pascal space type.  This is documented by IBM; what does it mean?
     Pascal space type.  This is documented by IBM; what does it mean?
     This use of the `b' type descriptor can be distinguished from its
     This use of the `b' type descriptor can be distinguished from its
     use for builtin integral types (*note Builtin Type Descriptors::)
     use for builtin integral types (*note Builtin Type Descriptors::)
     because the character following the type descriptor is always a
     because the character following the type descriptor is always a
     digit, `(', or `-'.
     digit, `(', or `-'.
`B TYPE-INFORMATION'
`B TYPE-INFORMATION'
     A volatile-qualified version of TYPE-INFORMATION.  This is a Sun
     A volatile-qualified version of TYPE-INFORMATION.  This is a Sun
     extension.  References and stores to a variable with a
     extension.  References and stores to a variable with a
     volatile-qualified type must not be optimized or cached; they must
     volatile-qualified type must not be optimized or cached; they must
     occur as the user specifies them.
     occur as the user specifies them.
`d TYPE-INFORMATION'
`d TYPE-INFORMATION'
     File of type TYPE-INFORMATION.  As far as I know this is only used
     File of type TYPE-INFORMATION.  As far as I know this is only used
     by Pascal.
     by Pascal.
`k TYPE-INFORMATION'
`k TYPE-INFORMATION'
     A const-qualified version of TYPE-INFORMATION.  This is a Sun
     A const-qualified version of TYPE-INFORMATION.  This is a Sun
     extension.  A variable with a const-qualified type cannot be
     extension.  A variable with a const-qualified type cannot be
     modified.
     modified.
`M TYPE-INFORMATION ; LENGTH'
`M TYPE-INFORMATION ; LENGTH'
     Multiple instance type.  The type seems to composed of LENGTH
     Multiple instance type.  The type seems to composed of LENGTH
     repetitions of TYPE-INFORMATION, for example `character*3' is
     repetitions of TYPE-INFORMATION, for example `character*3' is
     represented by `M-2;3', where `-2' is a reference to a character
     represented by `M-2;3', where `-2' is a reference to a character
     type (*note Negative Type Numbers::).  I'm not sure how this
     type (*note Negative Type Numbers::).  I'm not sure how this
     differs from an array.  This appears to be a Fortran feature.
     differs from an array.  This appears to be a Fortran feature.
     LENGTH is a bound, like those in range types; see *Note
     LENGTH is a bound, like those in range types; see *Note
     Subranges::.
     Subranges::.
`S TYPE-INFORMATION'
`S TYPE-INFORMATION'
     Pascal set type.  TYPE-INFORMATION must be a small type such as an
     Pascal set type.  TYPE-INFORMATION must be a small type such as an
     enumeration or a subrange, and the type is a bitmask whose length
     enumeration or a subrange, and the type is a bitmask whose length
     is specified by the number of elements in TYPE-INFORMATION.
     is specified by the number of elements in TYPE-INFORMATION.
     In CHILL, if it is a bitstring instead of a set, also use the `S'
     In CHILL, if it is a bitstring instead of a set, also use the `S'
     type attribute (*note String Field::).
     type attribute (*note String Field::).
`* TYPE-INFORMATION'
`* TYPE-INFORMATION'
     Pointer to TYPE-INFORMATION.
     Pointer to TYPE-INFORMATION.


File: stabs.info,  Node: Cross-References,  Next: Subranges,  Prev: Miscellaneous Types,  Up: Types
File: stabs.info,  Node: Cross-References,  Next: Subranges,  Prev: Miscellaneous Types,  Up: Types
Cross-References to Other Types
Cross-References to Other Types
===============================
===============================
   A type can be used before it is defined; one common way to deal with
   A type can be used before it is defined; one common way to deal with
that situation is just to use a type reference to a type which has not
that situation is just to use a type reference to a type which has not
yet been defined.
yet been defined.
   Another way is with the `x' type descriptor, which is followed by
   Another way is with the `x' type descriptor, which is followed by
`s' for a structure tag, `u' for a union tag, or `e' for a enumerator
`s' for a structure tag, `u' for a union tag, or `e' for a enumerator
tag, followed by the name of the tag, followed by `:'.  If the name
tag, followed by the name of the tag, followed by `:'.  If the name
contains `::' between a `<' and `>' pair (for C++ templates), such a
contains `::' between a `<' and `>' pair (for C++ templates), such a
`::' does not end the name--only a single `:' ends the name; see *Note
`::' does not end the name--only a single `:' ends the name; see *Note
Nested Symbols::.
Nested Symbols::.
   For example, the following C declarations:
   For example, the following C declarations:
     struct foo;
     struct foo;
     struct foo *bar;
     struct foo *bar;
produce:
produce:
     .stabs "bar:G16=*17=xsfoo:",32,0,0,0
     .stabs "bar:G16=*17=xsfoo:",32,0,0,0
   Not all debuggers support the `x' type descriptor, so on some
   Not all debuggers support the `x' type descriptor, so on some
machines GCC does not use it.  I believe that for the above example it
machines GCC does not use it.  I believe that for the above example it
would just emit a reference to type 17 and never define it, but I
would just emit a reference to type 17 and never define it, but I
haven't verified that.
haven't verified that.
   Modula-2 imported types, at least on AIX, use the `i' type
   Modula-2 imported types, at least on AIX, use the `i' type
descriptor, which is followed by the name of the module from which the
descriptor, which is followed by the name of the module from which the
type is imported, followed by `:', followed by the name of the type.
type is imported, followed by `:', followed by the name of the type.
There is then optionally a comma followed by type information for the
There is then optionally a comma followed by type information for the
type.  This differs from merely naming the type (*note Typedefs::) in
type.  This differs from merely naming the type (*note Typedefs::) in
that it identifies the module; I don't understand whether the name of
that it identifies the module; I don't understand whether the name of
the type given here is always just the same as the name we are giving
the type given here is always just the same as the name we are giving
it, or whether this type descriptor is used with a nameless stab (*note
it, or whether this type descriptor is used with a nameless stab (*note
String Field::), or what.  The symbol ends with `;'.
String Field::), or what.  The symbol ends with `;'.


File: stabs.info,  Node: Subranges,  Next: Arrays,  Prev: Cross-References,  Up: Types
File: stabs.info,  Node: Subranges,  Next: Arrays,  Prev: Cross-References,  Up: Types
Subrange Types
Subrange Types
==============
==============
   The `r' type descriptor defines a type as a subrange of another
   The `r' type descriptor defines a type as a subrange of another
type.  It is followed by type information for the type of which it is a
type.  It is followed by type information for the type of which it is a
subrange, a semicolon, an integral lower bound, a semicolon, an
subrange, a semicolon, an integral lower bound, a semicolon, an
integral upper bound, and a semicolon.  The AIX documentation does not
integral upper bound, and a semicolon.  The AIX documentation does not
specify the trailing semicolon, in an effort to specify array indexes
specify the trailing semicolon, in an effort to specify array indexes
more cleanly, but a subrange which is not an array index has always
more cleanly, but a subrange which is not an array index has always
included a trailing semicolon (*note Arrays::).
included a trailing semicolon (*note Arrays::).
   Instead of an integer, either bound can be one of the following:
   Instead of an integer, either bound can be one of the following:
`A OFFSET'
`A OFFSET'
     The bound is passed by reference on the stack at offset OFFSET
     The bound is passed by reference on the stack at offset OFFSET
     from the argument list.  *Note Parameters::, for more information
     from the argument list.  *Note Parameters::, for more information
     on such offsets.
     on such offsets.
`T OFFSET'
`T OFFSET'
     The bound is passed by value on the stack at offset OFFSET from
     The bound is passed by value on the stack at offset OFFSET from
     the argument list.
     the argument list.
`a REGISTER-NUMBER'
`a REGISTER-NUMBER'
     The bound is pased by reference in register number REGISTER-NUMBER.
     The bound is pased by reference in register number REGISTER-NUMBER.
`t REGISTER-NUMBER'
`t REGISTER-NUMBER'
     The bound is passed by value in register number REGISTER-NUMBER.
     The bound is passed by value in register number REGISTER-NUMBER.
`J'
`J'
     There is no bound.
     There is no bound.
   Subranges are also used for builtin types; see *Note Traditional
   Subranges are also used for builtin types; see *Note Traditional
Builtin Types::.
Builtin Types::.


File: stabs.info,  Node: Arrays,  Next: Strings,  Prev: Subranges,  Up: Types
File: stabs.info,  Node: Arrays,  Next: Strings,  Prev: Subranges,  Up: Types
Array Types
Array Types
===========
===========
   Arrays use the `a' type descriptor.  Following the type descriptor
   Arrays use the `a' type descriptor.  Following the type descriptor
is the type of the index and the type of the array elements.  If the
is the type of the index and the type of the array elements.  If the
index type is a range type, it ends in a semicolon; otherwise (for
index type is a range type, it ends in a semicolon; otherwise (for
example, if it is a type reference), there does not appear to be any
example, if it is a type reference), there does not appear to be any
way to tell where the types are separated.  In an effort to clean up
way to tell where the types are separated.  In an effort to clean up
this mess, IBM documents the two types as being separated by a
this mess, IBM documents the two types as being separated by a
semicolon, and a range type as not ending in a semicolon (but this is
semicolon, and a range type as not ending in a semicolon (but this is
not right for range types which are not array indexes, *note
not right for range types which are not array indexes, *note
Subranges::).  I think probably the best solution is to specify that a
Subranges::).  I think probably the best solution is to specify that a
semicolon ends a range type, and that the index type and element type
semicolon ends a range type, and that the index type and element type
of an array are separated by a semicolon, but that if the index type is
of an array are separated by a semicolon, but that if the index type is
a range type, the extra semicolon can be omitted.  GDB (at least
a range type, the extra semicolon can be omitted.  GDB (at least
through version 4.9) doesn't support any kind of index type other than a
through version 4.9) doesn't support any kind of index type other than a
range anyway; I'm not sure about dbx.
range anyway; I'm not sure about dbx.
   It is well established, and widely used, that the type of the index,
   It is well established, and widely used, that the type of the index,
unlike most types found in the stabs, is merely a type definition, not
unlike most types found in the stabs, is merely a type definition, not
type information (*note String Field::) (that is, it need not start with
type information (*note String Field::) (that is, it need not start with
`TYPE-NUMBER=' if it is defining a new type).  According to a comment
`TYPE-NUMBER=' if it is defining a new type).  According to a comment
in GDB, this is also true of the type of the array elements; it gives
in GDB, this is also true of the type of the array elements; it gives
`ar1;1;10;ar1;1;10;4' as a legitimate way to express a two dimensional
`ar1;1;10;ar1;1;10;4' as a legitimate way to express a two dimensional
array.  According to AIX documentation, the element type must be type
array.  According to AIX documentation, the element type must be type
information.  GDB accepts either.
information.  GDB accepts either.
   The type of the index is often a range type, expressed as the type
   The type of the index is often a range type, expressed as the type
descriptor `r' and some parameters.  It defines the size of the array.
descriptor `r' and some parameters.  It defines the size of the array.
In the example below, the range `r1;0;2;' defines an index type which
In the example below, the range `r1;0;2;' defines an index type which
is a subrange of type 1 (integer), with a lower bound of 0 and an upper
is a subrange of type 1 (integer), with a lower bound of 0 and an upper
bound of 2.  This defines the valid range of subscripts of a
bound of 2.  This defines the valid range of subscripts of a
three-element C array.
three-element C array.
   For example, the definition:
   For example, the definition:
     char char_vec[3] = {'a','b','c'};
     char char_vec[3] = {'a','b','c'};
produces the output:
produces the output:
     .stabs "char_vec:G19=ar1;0;2;2",32,0,0,0
     .stabs "char_vec:G19=ar1;0;2;2",32,0,0,0
          .global _char_vec
          .global _char_vec
          .align 4
          .align 4
     _char_vec:
     _char_vec:
          .byte 97
          .byte 97
          .byte 98
          .byte 98
          .byte 99
          .byte 99
   If an array is "packed", the elements are spaced more closely than
   If an array is "packed", the elements are spaced more closely than
normal, saving memory at the expense of speed.  For example, an array
normal, saving memory at the expense of speed.  For example, an array
of 3-byte objects might, if unpacked, have each element aligned on a
of 3-byte objects might, if unpacked, have each element aligned on a
4-byte boundary, but if packed, have no padding.  One way to specify
4-byte boundary, but if packed, have no padding.  One way to specify
that something is packed is with type attributes (*note String
that something is packed is with type attributes (*note String
Field::).  In the case of arrays, another is to use the `P' type
Field::).  In the case of arrays, another is to use the `P' type
descriptor instead of `a'.  Other than specifying a packed array, `P'
descriptor instead of `a'.  Other than specifying a packed array, `P'
is identical to `a'.
is identical to `a'.
   An open array is represented by the `A' type descriptor followed by
   An open array is represented by the `A' type descriptor followed by
type information specifying the type of the array elements.
type information specifying the type of the array elements.
   An N-dimensional dynamic array is represented by
   An N-dimensional dynamic array is represented by
     D DIMENSIONS ; TYPE-INFORMATION
     D DIMENSIONS ; TYPE-INFORMATION
   DIMENSIONS is the number of dimensions; TYPE-INFORMATION specifies
   DIMENSIONS is the number of dimensions; TYPE-INFORMATION specifies
the type of the array elements.
the type of the array elements.
   A subarray of an N-dimensional array is represented by
   A subarray of an N-dimensional array is represented by
     E DIMENSIONS ; TYPE-INFORMATION
     E DIMENSIONS ; TYPE-INFORMATION
   DIMENSIONS is the number of dimensions; TYPE-INFORMATION specifies
   DIMENSIONS is the number of dimensions; TYPE-INFORMATION specifies
the type of the array elements.
the type of the array elements.


File: stabs.info,  Node: Strings,  Next: Enumerations,  Prev: Arrays,  Up: Types
File: stabs.info,  Node: Strings,  Next: Enumerations,  Prev: Arrays,  Up: Types
Strings
Strings
=======
=======
   Some languages, like C or the original Pascal, do not have string
   Some languages, like C or the original Pascal, do not have string
types, they just have related things like arrays of characters.  But
types, they just have related things like arrays of characters.  But
most Pascals and various other languages have string types, which are
most Pascals and various other languages have string types, which are
indicated as follows:
indicated as follows:
`n TYPE-INFORMATION ; BYTES'
`n TYPE-INFORMATION ; BYTES'
     BYTES is the maximum length.  I'm not sure what TYPE-INFORMATION
     BYTES is the maximum length.  I'm not sure what TYPE-INFORMATION
     is; I suspect that it means that this is a string of
     is; I suspect that it means that this is a string of
     TYPE-INFORMATION (thus allowing a string of integers, a string of
     TYPE-INFORMATION (thus allowing a string of integers, a string of
     wide characters, etc., as well as a string of characters).  Not
     wide characters, etc., as well as a string of characters).  Not
     sure what the format of this type is.  This is an AIX feature.
     sure what the format of this type is.  This is an AIX feature.
`z TYPE-INFORMATION ; BYTES'
`z TYPE-INFORMATION ; BYTES'
     Just like `n' except that this is a gstring, not an ordinary
     Just like `n' except that this is a gstring, not an ordinary
     string.  I don't know the difference.
     string.  I don't know the difference.
`N'
`N'
     Pascal Stringptr.  What is this?  This is an AIX feature.
     Pascal Stringptr.  What is this?  This is an AIX feature.
   Languages, such as CHILL which have a string type which is basically
   Languages, such as CHILL which have a string type which is basically
just an array of characters use the `S' type attribute (*note String
just an array of characters use the `S' type attribute (*note String
Field::).
Field::).


File: stabs.info,  Node: Enumerations,  Next: Structures,  Prev: Strings,  Up: Types
File: stabs.info,  Node: Enumerations,  Next: Structures,  Prev: Strings,  Up: Types
Enumerations
Enumerations
============
============
   Enumerations are defined with the `e' type descriptor.
   Enumerations are defined with the `e' type descriptor.
   The source line below declares an enumeration type at file scope.
   The source line below declares an enumeration type at file scope.
The type definition is located after the `N_RBRAC' that marks the end of
The type definition is located after the `N_RBRAC' that marks the end of
the previous procedure's block scope, and before the `N_FUN' that marks
the previous procedure's block scope, and before the `N_FUN' that marks
the beginning of the next procedure's block scope.  Therefore it does
the beginning of the next procedure's block scope.  Therefore it does
not describe a block local symbol, but a file local one.
not describe a block local symbol, but a file local one.
   The source line:
   The source line:
     enum e_places {first,second=3,last};
     enum e_places {first,second=3,last};
generates the following stab:
generates the following stab:
     .stabs "e_places:T22=efirst:0,second:3,last:4,;",128,0,0,0
     .stabs "e_places:T22=efirst:0,second:3,last:4,;",128,0,0,0
   The symbol descriptor (`T') says that the stab describes a
   The symbol descriptor (`T') says that the stab describes a
structure, enumeration, or union tag.  The type descriptor `e',
structure, enumeration, or union tag.  The type descriptor `e',
following the `22=' of the type definition narrows it down to an
following the `22=' of the type definition narrows it down to an
enumeration type.  Following the `e' is a list of the elements of the
enumeration type.  Following the `e' is a list of the elements of the
enumeration.  The format is `NAME:VALUE,'.  The list of elements ends
enumeration.  The format is `NAME:VALUE,'.  The list of elements ends
with `;'.  The fact that VALUE is specified as an integer can cause
with `;'.  The fact that VALUE is specified as an integer can cause
problems if the value is large.  GCC 2.5.2 tries to output it in octal
problems if the value is large.  GCC 2.5.2 tries to output it in octal
in that case with a leading zero, which is probably a good thing,
in that case with a leading zero, which is probably a good thing,
although GDB 4.11 supports octal only in cases where decimal is
although GDB 4.11 supports octal only in cases where decimal is
perfectly good.  Negative decimal values are supported by both GDB and
perfectly good.  Negative decimal values are supported by both GDB and
dbx.
dbx.
   There is no standard way to specify the size of an enumeration type;
   There is no standard way to specify the size of an enumeration type;
it is determined by the architecture (normally all enumerations types
it is determined by the architecture (normally all enumerations types
are 32 bits).  Type attributes can be used to specify an enumeration
are 32 bits).  Type attributes can be used to specify an enumeration
type of another size for debuggers which support them; see *Note String
type of another size for debuggers which support them; see *Note String
Field::.
Field::.
   Enumeration types are unusual in that they define symbols for the
   Enumeration types are unusual in that they define symbols for the
enumeration values (`first', `second', and `third' in the above
enumeration values (`first', `second', and `third' in the above
example), and even though these symbols are visible in the file as a
example), and even though these symbols are visible in the file as a
whole (rather than being in a more local namespace like structure
whole (rather than being in a more local namespace like structure
member names), they are defined in the type definition for the
member names), they are defined in the type definition for the
enumeration type rather than each having their own symbol.  In order to
enumeration type rather than each having their own symbol.  In order to
be fast, GDB will only get symbols from such types (in its initial scan
be fast, GDB will only get symbols from such types (in its initial scan
of the stabs) if the type is the first thing defined after a `T' or `t'
of the stabs) if the type is the first thing defined after a `T' or `t'
symbol descriptor (the above example fulfills this requirement).  If
symbol descriptor (the above example fulfills this requirement).  If
the type does not have a name, the compiler should emit it in a
the type does not have a name, the compiler should emit it in a
nameless stab (*note String Field::); GCC does this.
nameless stab (*note String Field::); GCC does this.


File: stabs.info,  Node: Structures,  Next: Typedefs,  Prev: Enumerations,  Up: Types
File: stabs.info,  Node: Structures,  Next: Typedefs,  Prev: Enumerations,  Up: Types
Structures
Structures
==========
==========
   The encoding of structures in stabs can be shown with an example.
   The encoding of structures in stabs can be shown with an example.
   The following source code declares a structure tag and defines an
   The following source code declares a structure tag and defines an
instance of the structure in global scope. Then a `typedef' equates the
instance of the structure in global scope. Then a `typedef' equates the
structure tag with a new type.  Seperate stabs are generated for the
structure tag with a new type.  Seperate stabs are generated for the
structure tag, the structure `typedef', and the structure instance.  The
structure tag, the structure `typedef', and the structure instance.  The
stabs for the tag and the `typedef' are emited when the definitions are
stabs for the tag and the `typedef' are emited when the definitions are
encountered.  Since the structure elements are not initialized, the
encountered.  Since the structure elements are not initialized, the
stab and code for the structure variable itself is located at the end
stab and code for the structure variable itself is located at the end
of the program in the bss section.
of the program in the bss section.
     struct s_tag {
     struct s_tag {
       int   s_int;
       int   s_int;
       float s_float;
       float s_float;
       char  s_char_vec[8];
       char  s_char_vec[8];
       struct s_tag* s_next;
       struct s_tag* s_next;
     } g_an_s;
     } g_an_s;
     typedef struct s_tag s_typedef;
     typedef struct s_tag s_typedef;
   The structure tag has an `N_LSYM' stab type because, like the
   The structure tag has an `N_LSYM' stab type because, like the
enumeration, the symbol has file scope.  Like the enumeration, the
enumeration, the symbol has file scope.  Like the enumeration, the
symbol descriptor is `T', for enumeration, structure, or tag type.  The
symbol descriptor is `T', for enumeration, structure, or tag type.  The
type descriptor `s' following the `16=' of the type definition narrows
type descriptor `s' following the `16=' of the type definition narrows
the symbol type to structure.
the symbol type to structure.
   Following the `s' type descriptor is the number of bytes the
   Following the `s' type descriptor is the number of bytes the
structure occupies, followed by a description of each structure element.
structure occupies, followed by a description of each structure element.
The structure element descriptions are of the form NAME:TYPE, BIT
The structure element descriptions are of the form NAME:TYPE, BIT
OFFSET FROM THE START OF THE STRUCT, NUMBER OF BITS IN THE ELEMENT.
OFFSET FROM THE START OF THE STRUCT, NUMBER OF BITS IN THE ELEMENT.
     # 128 is N_LSYM
     # 128 is N_LSYM
     .stabs "s_tag:T16=s20s_int:1,0,32;s_float:12,32,32;
     .stabs "s_tag:T16=s20s_int:1,0,32;s_float:12,32,32;
             s_char_vec:17=ar1;0;7;2,64,64;s_next:18=*16,128,32;;",128,0,0,0
             s_char_vec:17=ar1;0;7;2,64,64;s_next:18=*16,128,32;;",128,0,0,0
   In this example, the first two structure elements are previously
   In this example, the first two structure elements are previously
defined types.  For these, the type following the `NAME:' part of the
defined types.  For these, the type following the `NAME:' part of the
element description is a simple type reference.  The other two structure
element description is a simple type reference.  The other two structure
elements are new types.  In this case there is a type definition
elements are new types.  In this case there is a type definition
embedded after the `NAME:'.  The type definition for the array element
embedded after the `NAME:'.  The type definition for the array element
looks just like a type definition for a standalone array.  The `s_next'
looks just like a type definition for a standalone array.  The `s_next'
field is a pointer to the same kind of structure that the field is an
field is a pointer to the same kind of structure that the field is an
element of.  So the definition of structure type 16 contains a type
element of.  So the definition of structure type 16 contains a type
definition for an element which is a pointer to type 16.
definition for an element which is a pointer to type 16.
   If a field is a static member (this is a C++ feature in which a
   If a field is a static member (this is a C++ feature in which a
single variable appears to be a field of every structure of a given
single variable appears to be a field of every structure of a given
type) it still starts out with the field name, a colon, and the type,
type) it still starts out with the field name, a colon, and the type,
but then instead of a comma, bit position, comma, and bit size, there
but then instead of a comma, bit position, comma, and bit size, there
is a colon followed by the name of the variable which each such field
is a colon followed by the name of the variable which each such field
refers to.
refers to.
   If the structure has methods (a C++ feature), they follow the
   If the structure has methods (a C++ feature), they follow the
non-method fields; see *Note Cplusplus::.
non-method fields; see *Note Cplusplus::.


File: stabs.info,  Node: Typedefs,  Next: Unions,  Prev: Structures,  Up: Types
File: stabs.info,  Node: Typedefs,  Next: Unions,  Prev: Structures,  Up: Types
Giving a Type a Name
Giving a Type a Name
====================
====================
   To give a type a name, use the `t' symbol descriptor.  The type is
   To give a type a name, use the `t' symbol descriptor.  The type is
specified by the type information (*note String Field::) for the stab.
specified by the type information (*note String Field::) for the stab.
For example,
For example,
     .stabs "s_typedef:t16",128,0,0,0     # 128 is N_LSYM
     .stabs "s_typedef:t16",128,0,0,0     # 128 is N_LSYM
   specifies that `s_typedef' refers to type number 16.  Such stabs
   specifies that `s_typedef' refers to type number 16.  Such stabs
have symbol type `N_LSYM' (or `C_DECL' for XCOFF).  (The Sun
have symbol type `N_LSYM' (or `C_DECL' for XCOFF).  (The Sun
documentation mentions using `N_GSYM' in some cases).
documentation mentions using `N_GSYM' in some cases).
   If you are specifying the tag name for a structure, union, or
   If you are specifying the tag name for a structure, union, or
enumeration, use the `T' symbol descriptor instead.  I believe C is the
enumeration, use the `T' symbol descriptor instead.  I believe C is the
only language with this feature.
only language with this feature.
   If the type is an opaque type (I believe this is a Modula-2 feature),
   If the type is an opaque type (I believe this is a Modula-2 feature),
AIX provides a type descriptor to specify it.  The type descriptor is
AIX provides a type descriptor to specify it.  The type descriptor is
`o' and is followed by a name.  I don't know what the name means--is it
`o' and is followed by a name.  I don't know what the name means--is it
always the same as the name of the type, or is this type descriptor
always the same as the name of the type, or is this type descriptor
used with a nameless stab (*note String Field::)?  There optionally
used with a nameless stab (*note String Field::)?  There optionally
follows a comma followed by type information which defines the type of
follows a comma followed by type information which defines the type of
this type.  If omitted, a semicolon is used in place of the comma and
this type.  If omitted, a semicolon is used in place of the comma and
the type information, and the type is much like a generic pointer
the type information, and the type is much like a generic pointer
type--it has a known size but little else about it is specified.
type--it has a known size but little else about it is specified.


File: stabs.info,  Node: Unions,  Next: Function Types,  Prev: Typedefs,  Up: Types
File: stabs.info,  Node: Unions,  Next: Function Types,  Prev: Typedefs,  Up: Types
Unions
Unions
======
======
     union u_tag {
     union u_tag {
       int  u_int;
       int  u_int;
       float u_float;
       float u_float;
       char* u_char;
       char* u_char;
     } an_u;
     } an_u;
   This code generates a stab for a union tag and a stab for a union
   This code generates a stab for a union tag and a stab for a union
variable.  Both use the `N_LSYM' stab type.  If a union variable is
variable.  Both use the `N_LSYM' stab type.  If a union variable is
scoped locally to the procedure in which it is defined, its stab is
scoped locally to the procedure in which it is defined, its stab is
located immediately preceding the `N_LBRAC' for the procedure's block
located immediately preceding the `N_LBRAC' for the procedure's block
start.
start.
   The stab for the union tag, however, is located preceding the code
   The stab for the union tag, however, is located preceding the code
for the procedure in which it is defined.  The stab type is `N_LSYM'.
for the procedure in which it is defined.  The stab type is `N_LSYM'.
This would seem to imply that the union type is file scope, like the
This would seem to imply that the union type is file scope, like the
struct type `s_tag'.  This is not true.  The contents and position of
struct type `s_tag'.  This is not true.  The contents and position of
the stab for `u_type' do not convey any infomation about its procedure
the stab for `u_type' do not convey any infomation about its procedure
local scope.
local scope.
     # 128 is N_LSYM
     # 128 is N_LSYM
     .stabs "u_tag:T23=u4u_int:1,0,32;u_float:12,0,32;u_char:21,0,32;;",
     .stabs "u_tag:T23=u4u_int:1,0,32;u_float:12,0,32;u_char:21,0,32;;",
            128,0,0,0
            128,0,0,0
   The symbol descriptor `T', following the `name:' means that the stab
   The symbol descriptor `T', following the `name:' means that the stab
describes an enumeration, structure, or union tag.  The type descriptor
describes an enumeration, structure, or union tag.  The type descriptor
`u', following the `23=' of the type definition, narrows it down to a
`u', following the `23=' of the type definition, narrows it down to a
union type definition.  Following the `u' is the number of bytes in the
union type definition.  Following the `u' is the number of bytes in the
union.  After that is a list of union element descriptions.  Their
union.  After that is a list of union element descriptions.  Their
format is NAME:TYPE, BIT OFFSET INTO THE UNION, NUMBER OF BYTES FOR THE
format is NAME:TYPE, BIT OFFSET INTO THE UNION, NUMBER OF BYTES FOR THE
ELEMENT;.
ELEMENT;.
   The stab for the union variable is:
   The stab for the union variable is:
     .stabs "an_u:23",128,0,0,-20     # 128 is N_LSYM
     .stabs "an_u:23",128,0,0,-20     # 128 is N_LSYM
   `-20' specifies where the variable is stored (*note Stack
   `-20' specifies where the variable is stored (*note Stack
Variables::).
Variables::).


File: stabs.info,  Node: Function Types,  Prev: Unions,  Up: Types
File: stabs.info,  Node: Function Types,  Prev: Unions,  Up: Types
Function Types
Function Types
==============
==============
   Various types can be defined for function variables.  These types are
   Various types can be defined for function variables.  These types are
not used in defining functions (*note Procedures::); they are used for
not used in defining functions (*note Procedures::); they are used for
things like pointers to functions.
things like pointers to functions.
   The simple, traditional, type is type descriptor `f' is followed by
   The simple, traditional, type is type descriptor `f' is followed by
type information for the return type of the function, followed by a
type information for the return type of the function, followed by a
semicolon.
semicolon.
   This does not deal with functions for which the number and types of
   This does not deal with functions for which the number and types of
the parameters are part of the type, as in Modula-2 or ANSI C.  AIX
the parameters are part of the type, as in Modula-2 or ANSI C.  AIX
provides extensions to specify these, using the `f', `F', `p', and `R'
provides extensions to specify these, using the `f', `F', `p', and `R'
type descriptors.
type descriptors.
   First comes the type descriptor.  If it is `f' or `F', this type
   First comes the type descriptor.  If it is `f' or `F', this type
involves a function rather than a procedure, and the type information
involves a function rather than a procedure, and the type information
for the return type of the function follows, followed by a comma.  Then
for the return type of the function follows, followed by a comma.  Then
comes the number of parameters to the function and a semicolon.  Then,
comes the number of parameters to the function and a semicolon.  Then,
for each parameter, there is the name of the parameter followed by a
for each parameter, there is the name of the parameter followed by a
colon (this is only present for type descriptors `R' and `F' which
colon (this is only present for type descriptors `R' and `F' which
represent Pascal function or procedure parameters), type information
represent Pascal function or procedure parameters), type information
for the parameter, a comma, 0 if passed by reference or 1 if passed by
for the parameter, a comma, 0 if passed by reference or 1 if passed by
value, and a semicolon.  The type definition ends with a semicolon.
value, and a semicolon.  The type definition ends with a semicolon.
   For example, this variable definition:
   For example, this variable definition:
     int (*g_pf)();
     int (*g_pf)();
generates the following code:
generates the following code:
     .stabs "g_pf:G24=*25=f1",32,0,0,0
     .stabs "g_pf:G24=*25=f1",32,0,0,0
         .common _g_pf,4,"bss"
         .common _g_pf,4,"bss"
   The variable defines a new type, 24, which is a pointer to another
   The variable defines a new type, 24, which is a pointer to another
new type, 25, which is a function returning `int'.
new type, 25, which is a function returning `int'.


File: stabs.info,  Node: Symbol Tables,  Next: Cplusplus,  Prev: Types,  Up: Top
File: stabs.info,  Node: Symbol Tables,  Next: Cplusplus,  Prev: Types,  Up: Top
Symbol Information in Symbol Tables
Symbol Information in Symbol Tables
***********************************
***********************************
   This chapter describes the format of symbol table entries and how
   This chapter describes the format of symbol table entries and how
stab assembler directives map to them.  It also describes the
stab assembler directives map to them.  It also describes the
transformations that the assembler and linker make on data from stabs.
transformations that the assembler and linker make on data from stabs.
* Menu:
* Menu:
* Symbol Table Format::
* Symbol Table Format::
* Transformations On Symbol Tables::
* Transformations On Symbol Tables::


File: stabs.info,  Node: Symbol Table Format,  Next: Transformations On Symbol Tables,  Up: Symbol Tables
File: stabs.info,  Node: Symbol Table Format,  Next: Transformations On Symbol Tables,  Up: Symbol Tables
Symbol Table Format
Symbol Table Format
===================
===================
   Each time the assembler encounters a stab directive, it puts each
   Each time the assembler encounters a stab directive, it puts each
field of the stab into a corresponding field in a symbol table entry of
field of the stab into a corresponding field in a symbol table entry of
its output file.  If the stab contains a string field, the symbol table
its output file.  If the stab contains a string field, the symbol table
entry for that stab points to a string table entry containing the
entry for that stab points to a string table entry containing the
string data from the stab.  Assembler labels become relocatable
string data from the stab.  Assembler labels become relocatable
addresses.  Symbol table entries in a.out have the format:
addresses.  Symbol table entries in a.out have the format:
     struct internal_nlist {
     struct internal_nlist {
       unsigned long n_strx;         /* index into string table of name */
       unsigned long n_strx;         /* index into string table of name */
       unsigned char n_type;         /* type of symbol */
       unsigned char n_type;         /* type of symbol */
       unsigned char n_other;        /* misc info (usually empty) */
       unsigned char n_other;        /* misc info (usually empty) */
       unsigned short n_desc;        /* description field */
       unsigned short n_desc;        /* description field */
       bfd_vma n_value;              /* value of symbol */
       bfd_vma n_value;              /* value of symbol */
     };
     };
   If the stab has a string, the `n_strx' field holds the offset in
   If the stab has a string, the `n_strx' field holds the offset in
bytes of the string within the string table.  The string is terminated
bytes of the string within the string table.  The string is terminated
by a NUL character.  If the stab lacks a string (for example, it was
by a NUL character.  If the stab lacks a string (for example, it was
produced by a `.stabn' or `.stabd' directive), the `n_strx' field is
produced by a `.stabn' or `.stabd' directive), the `n_strx' field is
zero.
zero.
   Symbol table entries with `n_type' field values greater than 0x1f
   Symbol table entries with `n_type' field values greater than 0x1f
originated as stabs generated by the compiler (with one random
originated as stabs generated by the compiler (with one random
exception).  The other entries were placed in the symbol table of the
exception).  The other entries were placed in the symbol table of the
executable by the assembler or the linker.
executable by the assembler or the linker.


File: stabs.info,  Node: Transformations On Symbol Tables,  Prev: Symbol Table Format,  Up: Symbol Tables
File: stabs.info,  Node: Transformations On Symbol Tables,  Prev: Symbol Table Format,  Up: Symbol Tables
Transformations on Symbol Tables
Transformations on Symbol Tables
================================
================================
   The linker concatenates object files and does fixups of externally
   The linker concatenates object files and does fixups of externally
defined symbols.
defined symbols.
   You can see the transformations made on stab data by the assembler
   You can see the transformations made on stab data by the assembler
and linker by examining the symbol table after each pass of the build.
and linker by examining the symbol table after each pass of the build.
To do this, use `nm -ap', which dumps the symbol table, including
To do this, use `nm -ap', which dumps the symbol table, including
debugging information, unsorted.  For stab entries the columns are:
debugging information, unsorted.  For stab entries the columns are:
VALUE, OTHER, DESC, TYPE, STRING.  For assembler and linker symbols,
VALUE, OTHER, DESC, TYPE, STRING.  For assembler and linker symbols,
the columns are: VALUE, TYPE, STRING.
the columns are: VALUE, TYPE, STRING.
   The low 5 bits of the stab type tell the linker how to relocate the
   The low 5 bits of the stab type tell the linker how to relocate the
value of the stab.  Thus for stab types like `N_RSYM' and `N_LSYM',
value of the stab.  Thus for stab types like `N_RSYM' and `N_LSYM',
where the value is an offset or a register number, the low 5 bits are
where the value is an offset or a register number, the low 5 bits are
`N_ABS', which tells the linker not to relocate the value.
`N_ABS', which tells the linker not to relocate the value.
   Where the value of a stab contains an assembly language label, it is
   Where the value of a stab contains an assembly language label, it is
transformed by each build step.  The assembler turns it into a
transformed by each build step.  The assembler turns it into a
relocatable address and the linker turns it into an absolute address.
relocatable address and the linker turns it into an absolute address.
* Menu:
* Menu:
* Transformations On Static Variables::
* Transformations On Static Variables::
* Transformations On Global Variables::
* Transformations On Global Variables::
* Stab Section Transformations::           For some object file formats,
* Stab Section Transformations::           For some object file formats,
                                           things are a bit different.
                                           things are a bit different.


File: stabs.info,  Node: Transformations On Static Variables,  Next: Transformations On Global Variables,  Up: Transformations On Symbol Tables
File: stabs.info,  Node: Transformations On Static Variables,  Next: Transformations On Global Variables,  Up: Transformations On Symbol Tables
Transformations on Static Variables
Transformations on Static Variables
-----------------------------------
-----------------------------------
   This source line defines a static variable at file scope:
   This source line defines a static variable at file scope:
     static int s_g_repeat
     static int s_g_repeat
The following stab describes the symbol:
The following stab describes the symbol:
     .stabs "s_g_repeat:S1",38,0,0,_s_g_repeat
     .stabs "s_g_repeat:S1",38,0,0,_s_g_repeat
The assembler transforms the stab into this symbol table entry in the
The assembler transforms the stab into this symbol table entry in the
`.o' file.  The location is expressed as a data segment offset.
`.o' file.  The location is expressed as a data segment offset.
     00000084 - 00 0000 STSYM s_g_repeat:S1
     00000084 - 00 0000 STSYM s_g_repeat:S1
In the symbol table entry from the executable, the linker has made the
In the symbol table entry from the executable, the linker has made the
relocatable address absolute.
relocatable address absolute.
     0000e00c - 00 0000 STSYM s_g_repeat:S1
     0000e00c - 00 0000 STSYM s_g_repeat:S1


File: stabs.info,  Node: Transformations On Global Variables,  Next: Stab Section Transformations,  Prev: Transformations On Static Variables,  Up: Transformations On Symbol Tables
File: stabs.info,  Node: Transformations On Global Variables,  Next: Stab Section Transformations,  Prev: Transformations On Static Variables,  Up: Transformations On Symbol Tables
Transformations on Global Variables
Transformations on Global Variables
-----------------------------------
-----------------------------------
   Stabs for global variables do not contain location information. In
   Stabs for global variables do not contain location information. In
this case, the debugger finds location information in the assembler or
this case, the debugger finds location information in the assembler or
linker symbol table entry describing the variable.  The source line:
linker symbol table entry describing the variable.  The source line:
     char g_foo = 'c';
     char g_foo = 'c';
generates the stab:
generates the stab:
     .stabs "g_foo:G2",32,0,0,0
     .stabs "g_foo:G2",32,0,0,0
   The variable is represented by two symbol table entries in the object
   The variable is represented by two symbol table entries in the object
file (see below).  The first one originated as a stab.  The second one
file (see below).  The first one originated as a stab.  The second one
is an external symbol.  The upper case `D' signifies that the `n_type'
is an external symbol.  The upper case `D' signifies that the `n_type'
field of the symbol table contains 7, `N_DATA' with local linkage.  The
field of the symbol table contains 7, `N_DATA' with local linkage.  The
stab's value is zero since the value is not used for `N_GSYM' stabs.
stab's value is zero since the value is not used for `N_GSYM' stabs.
The value of the linker symbol is the relocatable address corresponding
The value of the linker symbol is the relocatable address corresponding
to the variable.
to the variable.
     00000000 - 00 0000  GSYM g_foo:G2
     00000000 - 00 0000  GSYM g_foo:G2
     00000080 D _g_foo
     00000080 D _g_foo
These entries as transformed by the linker.  The linker symbol table
These entries as transformed by the linker.  The linker symbol table
entry now holds an absolute address:
entry now holds an absolute address:
     00000000 - 00 0000  GSYM g_foo:G2
     00000000 - 00 0000  GSYM g_foo:G2
     ...
     ...
     0000e008 D _g_foo
     0000e008 D _g_foo


File: stabs.info,  Node: Stab Section Transformations,  Prev: Transformations On Global Variables,  Up: Transformations On Symbol Tables
File: stabs.info,  Node: Stab Section Transformations,  Prev: Transformations On Global Variables,  Up: Transformations On Symbol Tables
Transformations of Stabs in separate sections
Transformations of Stabs in separate sections
---------------------------------------------
---------------------------------------------
   For object file formats using stabs in separate sections (*note Stab
   For object file formats using stabs in separate sections (*note Stab
Sections::), use `objdump --stabs' instead of `nm' to show the stabs in
Sections::), use `objdump --stabs' instead of `nm' to show the stabs in
an object or executable file.  `objdump' is a GNU utility; Sun does not
an object or executable file.  `objdump' is a GNU utility; Sun does not
provide any equivalent.
provide any equivalent.
   The following example is for a stab whose value is an address is
   The following example is for a stab whose value is an address is
relative to the compilation unit (*note ELF Linker Relocation::).  For
relative to the compilation unit (*note ELF Linker Relocation::).  For
example, if the source line
example, if the source line
     static int ld = 5;
     static int ld = 5;
   appears within a function, then the assembly language output from the
   appears within a function, then the assembly language output from the
compiler contains:
compiler contains:
     .Ddata.data:
     .Ddata.data:
     ...
     ...
             .stabs "ld:V(0,3)",0x26,0,4,.L18-Ddata.data    # 0x26 is N_STSYM
             .stabs "ld:V(0,3)",0x26,0,4,.L18-Ddata.data    # 0x26 is N_STSYM
     ...
     ...
     .L18:
     .L18:
             .align 4
             .align 4
             .word 0x5
             .word 0x5
   Because the value is formed by subtracting one symbol from another,
   Because the value is formed by subtracting one symbol from another,
the value is absolute, not relocatable, and so the object file contains
the value is absolute, not relocatable, and so the object file contains
     Symnum n_type n_othr n_desc n_value  n_strx String
     Symnum n_type n_othr n_desc n_value  n_strx String
     31     STSYM  0      4      00000004 680    ld:V(0,3)
     31     STSYM  0      4      00000004 680    ld:V(0,3)
   without any relocations, and the executable file also contains
   without any relocations, and the executable file also contains
     Symnum n_type n_othr n_desc n_value  n_strx String
     Symnum n_type n_othr n_desc n_value  n_strx String
     31     STSYM  0      4      00000004 680    ld:V(0,3)
     31     STSYM  0      4      00000004 680    ld:V(0,3)


File: stabs.info,  Node: Cplusplus,  Next: Stab Types,  Prev: Symbol Tables,  Up: Top
File: stabs.info,  Node: Cplusplus,  Next: Stab Types,  Prev: Symbol Tables,  Up: Top
GNU C++ Stabs
GNU C++ Stabs
*************
*************
* Menu:
* Menu:
* Class Names::                 C++ class names are both tags and typedefs.
* Class Names::                 C++ class names are both tags and typedefs.
* Nested Symbols::              C++ symbol names can be within other types.
* Nested Symbols::              C++ symbol names can be within other types.
* Basic Cplusplus Types::
* Basic Cplusplus Types::
* Simple Classes::
* Simple Classes::
* Class Instance::
* Class Instance::
* Methods::                     Method definition
* Methods::                     Method definition
* Method Type Descriptor::      The `#' type descriptor
* Method Type Descriptor::      The `#' type descriptor
* Member Type Descriptor::      The `@' type descriptor
* Member Type Descriptor::      The `@' type descriptor
* Protections::
* Protections::
* Method Modifiers::
* Method Modifiers::
* Virtual Methods::
* Virtual Methods::
* Inheritence::
* Inheritence::
* Virtual Base Classes::
* Virtual Base Classes::
* Static Members::
* Static Members::


File: stabs.info,  Node: Class Names,  Next: Nested Symbols,  Up: Cplusplus
File: stabs.info,  Node: Class Names,  Next: Nested Symbols,  Up: Cplusplus
C++ Class Names
C++ Class Names
===============
===============
   In C++, a class name which is declared with `class', `struct', or
   In C++, a class name which is declared with `class', `struct', or
`union', is not only a tag, as in C, but also a type name.  Thus there
`union', is not only a tag, as in C, but also a type name.  Thus there
should be stabs with both `t' and `T' symbol descriptors (*note
should be stabs with both `t' and `T' symbol descriptors (*note
Typedefs::).
Typedefs::).
   To save space, there is a special abbreviation for this case.  If the
   To save space, there is a special abbreviation for this case.  If the
`T' symbol descriptor is followed by `t', then the stab defines both a
`T' symbol descriptor is followed by `t', then the stab defines both a
type name and a tag.
type name and a tag.
   For example, the C++ code
   For example, the C++ code
     struct foo {int x;};
     struct foo {int x;};
   can be represented as either
   can be represented as either
     .stabs "foo:T19=s4x:1,0,32;;",128,0,0,0       # 128 is N_LSYM
     .stabs "foo:T19=s4x:1,0,32;;",128,0,0,0       # 128 is N_LSYM
     .stabs "foo:t19",128,0,0,0
     .stabs "foo:t19",128,0,0,0
   or
   or
     .stabs "foo:Tt19=s4x:1,0,32;;",128,0,0,0
     .stabs "foo:Tt19=s4x:1,0,32;;",128,0,0,0


File: stabs.info,  Node: Nested Symbols,  Next: Basic Cplusplus Types,  Prev: Class Names,  Up: Cplusplus
File: stabs.info,  Node: Nested Symbols,  Next: Basic Cplusplus Types,  Prev: Class Names,  Up: Cplusplus
Defining a Symbol Within Another Type
Defining a Symbol Within Another Type
=====================================
=====================================
   In C++, a symbol (such as a type name) can be defined within another
   In C++, a symbol (such as a type name) can be defined within another
type.
type.
   In stabs, this is sometimes represented by making the name of a
   In stabs, this is sometimes represented by making the name of a
symbol which contains `::'.  Such a pair of colons does not end the name
symbol which contains `::'.  Such a pair of colons does not end the name
of the symbol, the way a single colon would (*note String Field::).  I'm
of the symbol, the way a single colon would (*note String Field::).  I'm
not sure how consistently used or well thought out this mechanism is.
not sure how consistently used or well thought out this mechanism is.
So that a pair of colons in this position always has this meaning, `:'
So that a pair of colons in this position always has this meaning, `:'
cannot be used as a symbol descriptor.
cannot be used as a symbol descriptor.
   For example, if the string for a stab is `foo::bar::baz:t5=*6', then
   For example, if the string for a stab is `foo::bar::baz:t5=*6', then
`foo::bar::baz' is the name of the symbol, `t' is the symbol
`foo::bar::baz' is the name of the symbol, `t' is the symbol
descriptor, and `5=*6' is the type information.
descriptor, and `5=*6' is the type information.


File: stabs.info,  Node: Basic Cplusplus Types,  Next: Simple Classes,  Prev: Nested Symbols,  Up: Cplusplus
File: stabs.info,  Node: Basic Cplusplus Types,  Next: Simple Classes,  Prev: Nested Symbols,  Up: Cplusplus
Basic Types For C++
Basic Types For C++
===================
===================
   << the examples that follow are based on a01.C >>
   << the examples that follow are based on a01.C >>
   C++ adds two more builtin types to the set defined for C.  These are
   C++ adds two more builtin types to the set defined for C.  These are
the unknown type and the vtable record type.  The unknown type, type
the unknown type and the vtable record type.  The unknown type, type
16, is defined in terms of itself like the void type.
16, is defined in terms of itself like the void type.
   The vtable record type, type 17, is defined as a structure type and
   The vtable record type, type 17, is defined as a structure type and
then as a structure tag.  The structure has four fields: delta, index,
then as a structure tag.  The structure has four fields: delta, index,
pfn, and delta2.  pfn is the function pointer.
pfn, and delta2.  pfn is the function pointer.
   << In boilerplate $vtbl_ptr_type, what are the fields delta, index,
   << In boilerplate $vtbl_ptr_type, what are the fields delta, index,
and delta2 used for? >>
and delta2 used for? >>
   This basic type is present in all C++ programs even if there are no
   This basic type is present in all C++ programs even if there are no
virtual methods defined.
virtual methods defined.
     .stabs "struct_name:sym_desc(type)type_def(17)=type_desc(struct)struct_bytes(8)
     .stabs "struct_name:sym_desc(type)type_def(17)=type_desc(struct)struct_bytes(8)
             elem_name(delta):type_ref(short int),bit_offset(0),field_bits(16);
             elem_name(delta):type_ref(short int),bit_offset(0),field_bits(16);
             elem_name(index):type_ref(short int),bit_offset(16),field_bits(16);
             elem_name(index):type_ref(short int),bit_offset(16),field_bits(16);
             elem_name(pfn):type_def(18)=type_desc(ptr to)type_ref(void),
             elem_name(pfn):type_def(18)=type_desc(ptr to)type_ref(void),
                                         bit_offset(32),field_bits(32);
                                         bit_offset(32),field_bits(32);
             elem_name(delta2):type_def(short int);bit_offset(32),field_bits(16);;"
             elem_name(delta2):type_def(short int);bit_offset(32),field_bits(16);;"
             N_LSYM, NIL, NIL
             N_LSYM, NIL, NIL
     .stabs "$vtbl_ptr_type:t17=s8
     .stabs "$vtbl_ptr_type:t17=s8
             delta:6,0,16;index:6,16,16;pfn:18=*15,32,32;delta2:6,32,16;;"
             delta:6,0,16;index:6,16,16;pfn:18=*15,32,32;delta2:6,32,16;;"
             ,128,0,0,0
             ,128,0,0,0
     .stabs "name:sym_dec(struct tag)type_ref($vtbl_ptr_type)",N_LSYM,NIL,NIL,NIL
     .stabs "name:sym_dec(struct tag)type_ref($vtbl_ptr_type)",N_LSYM,NIL,NIL,NIL
     .stabs "$vtbl_ptr_type:T17",128,0,0,0
     .stabs "$vtbl_ptr_type:T17",128,0,0,0


File: stabs.info,  Node: Simple Classes,  Next: Class Instance,  Prev: Basic Cplusplus Types,  Up: Cplusplus
File: stabs.info,  Node: Simple Classes,  Next: Class Instance,  Prev: Basic Cplusplus Types,  Up: Cplusplus
Simple Class Definition
Simple Class Definition
=======================
=======================
   The stabs describing C++ language features are an extension of the
   The stabs describing C++ language features are an extension of the
stabs describing C.  Stabs representing C++ class types elaborate
stabs describing C.  Stabs representing C++ class types elaborate
extensively on the stab format used to describe structure types in C.
extensively on the stab format used to describe structure types in C.
Stabs representing class type variables look just like stabs
Stabs representing class type variables look just like stabs
representing C language variables.
representing C language variables.
   Consider the following very simple class definition.
   Consider the following very simple class definition.
     class baseA {
     class baseA {
     public:
     public:
             int Adat;
             int Adat;
             int Ameth(int in, char other);
             int Ameth(int in, char other);
     };
     };
   The class `baseA' is represented by two stabs.  The first stab
   The class `baseA' is represented by two stabs.  The first stab
describes the class as a structure type.  The second stab describes a
describes the class as a structure type.  The second stab describes a
structure tag of the class type.  Both stabs are of stab type `N_LSYM'.
structure tag of the class type.  Both stabs are of stab type `N_LSYM'.
Since the stab is not located between an `N_FUN' and an `N_LBRAC' stab
Since the stab is not located between an `N_FUN' and an `N_LBRAC' stab
this indicates that the class is defined at file scope.  If it were,
this indicates that the class is defined at file scope.  If it were,
then the `N_LSYM' would signify a local variable.
then the `N_LSYM' would signify a local variable.
   A stab describing a C++ class type is similar in format to a stab
   A stab describing a C++ class type is similar in format to a stab
describing a C struct, with each class member shown as a field in the
describing a C struct, with each class member shown as a field in the
structure.  The part of the struct format describing fields is expanded
structure.  The part of the struct format describing fields is expanded
to include extra information relevent to C++ class members.  In
to include extra information relevent to C++ class members.  In
addition, if the class has multiple base classes or virtual functions
addition, if the class has multiple base classes or virtual functions
the struct format outside of the field parts is also augmented.
the struct format outside of the field parts is also augmented.
   In this simple example the field part of the C++ class stab
   In this simple example the field part of the C++ class stab
representing member data looks just like the field part of a C struct
representing member data looks just like the field part of a C struct
stab.  The section on protections describes how its format is sometimes
stab.  The section on protections describes how its format is sometimes
extended for member data.
extended for member data.
   The field part of a C++ class stab representing a member function
   The field part of a C++ class stab representing a member function
differs substantially from the field part of a C struct stab.  It still
differs substantially from the field part of a C struct stab.  It still
begins with `name:' but then goes on to define a new type number for
begins with `name:' but then goes on to define a new type number for
the member function, describe its return type, its argument types, its
the member function, describe its return type, its argument types, its
protection level, any qualifiers applied to the method definition, and
protection level, any qualifiers applied to the method definition, and
whether the method is virtual or not.  If the method is virtual then
whether the method is virtual or not.  If the method is virtual then
the method description goes on to give the vtable index of the method,
the method description goes on to give the vtable index of the method,
and the type number of the first base class defining the method.
and the type number of the first base class defining the method.
   When the field name is a method name it is followed by two colons
   When the field name is a method name it is followed by two colons
rather than one.  This is followed by a new type definition for the
rather than one.  This is followed by a new type definition for the
method.  This is a number followed by an equal sign and the type of the
method.  This is a number followed by an equal sign and the type of the
method.  Normally this will be a type declared using the `#' type
method.  Normally this will be a type declared using the `#' type
descriptor; see *Note Method Type Descriptor::; static member functions
descriptor; see *Note Method Type Descriptor::; static member functions
are declared using the `f' type descriptor instead; see *Note Function
are declared using the `f' type descriptor instead; see *Note Function
Types::.
Types::.
   The format of an overloaded operator method name differs from that of
   The format of an overloaded operator method name differs from that of
other methods.  It is `op$::OPERATOR-NAME.' where OPERATOR-NAME is the
other methods.  It is `op$::OPERATOR-NAME.' where OPERATOR-NAME is the
operator name such as `+' or `+='.  The name ends with a period, and
operator name such as `+' or `+='.  The name ends with a period, and
any characters except the period can occur in the OPERATOR-NAME string.
any characters except the period can occur in the OPERATOR-NAME string.
   The next part of the method description represents the arguments to
   The next part of the method description represents the arguments to
the method, preceeded by a colon and ending with a semi-colon.  The
the method, preceeded by a colon and ending with a semi-colon.  The
types of the arguments are expressed in the same way argument types are
types of the arguments are expressed in the same way argument types are
expressed in C++ name mangling.  In this example an `int' and a `char'
expressed in C++ name mangling.  In this example an `int' and a `char'
map to `ic'.
map to `ic'.
   This is followed by a number, a letter, and an asterisk or period,
   This is followed by a number, a letter, and an asterisk or period,
followed by another semicolon.  The number indicates the protections
followed by another semicolon.  The number indicates the protections
that apply to the member function.  Here the 2 means public.  The
that apply to the member function.  Here the 2 means public.  The
letter encodes any qualifier applied to the method definition.  In this
letter encodes any qualifier applied to the method definition.  In this
case, `A' means that it is a normal function definition.  The dot shows
case, `A' means that it is a normal function definition.  The dot shows
that the method is not virtual.  The sections that follow elaborate
that the method is not virtual.  The sections that follow elaborate
further on these fields and describe the additional information present
further on these fields and describe the additional information present
for virtual methods.
for virtual methods.
     .stabs "class_name:sym_desc(type)type_def(20)=type_desc(struct)struct_bytes(4)
     .stabs "class_name:sym_desc(type)type_def(20)=type_desc(struct)struct_bytes(4)
             field_name(Adat):type(int),bit_offset(0),field_bits(32);
             field_name(Adat):type(int),bit_offset(0),field_bits(32);
             method_name(Ameth)::type_def(21)=type_desc(method)return_type(int);
             method_name(Ameth)::type_def(21)=type_desc(method)return_type(int);
             :arg_types(int char);
             :arg_types(int char);
             protection(public)qualifier(normal)virtual(no);;"
             protection(public)qualifier(normal)virtual(no);;"
             N_LSYM,NIL,NIL,NIL
             N_LSYM,NIL,NIL,NIL
     .stabs "baseA:t20=s4Adat:1,0,32;Ameth::21=##1;:ic;2A.;;",128,0,0,0
     .stabs "baseA:t20=s4Adat:1,0,32;Ameth::21=##1;:ic;2A.;;",128,0,0,0
     .stabs "class_name:sym_desc(struct tag)",N_LSYM,NIL,NIL,NIL
     .stabs "class_name:sym_desc(struct tag)",N_LSYM,NIL,NIL,NIL
     .stabs "baseA:T20",128,0,0,0
     .stabs "baseA:T20",128,0,0,0
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.