/* Intel 386 target-dependent stuff.
|
/* Intel 386 target-dependent stuff.
|
Copyright (C) 1988, 1989, 1991, 1994, 1995, 1996, 1998
|
Copyright (C) 1988, 1989, 1991, 1994, 1995, 1996, 1998
|
Free Software Foundation, Inc.
|
Free Software Foundation, Inc.
|
|
|
This file is part of GDB.
|
This file is part of GDB.
|
|
|
This program is free software; you can redistribute it and/or modify
|
This program is free software; you can redistribute it and/or modify
|
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
the Free Software Foundation; either version 2 of the License, or
|
the Free Software Foundation; either version 2 of the License, or
|
(at your option) any later version.
|
(at your option) any later version.
|
|
|
This program is distributed in the hope that it will be useful,
|
This program is distributed in the hope that it will be useful,
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
GNU General Public License for more details.
|
GNU General Public License for more details.
|
|
|
You should have received a copy of the GNU General Public License
|
You should have received a copy of the GNU General Public License
|
along with this program; if not, write to the Free Software
|
along with this program; if not, write to the Free Software
|
Foundation, Inc., 59 Temple Place - Suite 330,
|
Foundation, Inc., 59 Temple Place - Suite 330,
|
Boston, MA 02111-1307, USA. */
|
Boston, MA 02111-1307, USA. */
|
|
|
#include "defs.h"
|
#include "defs.h"
|
#include "gdb_string.h"
|
#include "gdb_string.h"
|
#include "frame.h"
|
#include "frame.h"
|
#include "inferior.h"
|
#include "inferior.h"
|
#include "gdbcore.h"
|
#include "gdbcore.h"
|
#include "target.h"
|
#include "target.h"
|
#include "floatformat.h"
|
#include "floatformat.h"
|
#include "symtab.h"
|
#include "symtab.h"
|
#include "gdbcmd.h"
|
#include "gdbcmd.h"
|
#include "command.h"
|
#include "command.h"
|
|
|
static long i386_get_frame_setup PARAMS ((CORE_ADDR));
|
static long i386_get_frame_setup PARAMS ((CORE_ADDR));
|
|
|
static void i386_follow_jump PARAMS ((void));
|
static void i386_follow_jump PARAMS ((void));
|
|
|
static void codestream_read PARAMS ((unsigned char *, int));
|
static void codestream_read PARAMS ((unsigned char *, int));
|
|
|
static void codestream_seek PARAMS ((CORE_ADDR));
|
static void codestream_seek PARAMS ((CORE_ADDR));
|
|
|
static unsigned char codestream_fill PARAMS ((int));
|
static unsigned char codestream_fill PARAMS ((int));
|
|
|
CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR, char *));
|
CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR, char *));
|
|
|
static int gdb_print_insn_i386 (bfd_vma, disassemble_info *);
|
static int gdb_print_insn_i386 (bfd_vma, disassemble_info *);
|
|
|
void _initialize_i386_tdep PARAMS ((void));
|
void _initialize_i386_tdep PARAMS ((void));
|
|
|
/* i386_register_byte[i] is the offset into the register file of the
|
/* i386_register_byte[i] is the offset into the register file of the
|
start of register number i. We initialize this from
|
start of register number i. We initialize this from
|
i386_register_raw_size. */
|
i386_register_raw_size. */
|
int i386_register_byte[MAX_NUM_REGS];
|
int i386_register_byte[MAX_NUM_REGS];
|
|
|
/* i386_register_raw_size[i] is the number of bytes of storage in
|
/* i386_register_raw_size[i] is the number of bytes of storage in
|
GDB's register array occupied by register i. */
|
GDB's register array occupied by register i. */
|
int i386_register_raw_size[MAX_NUM_REGS] = {
|
int i386_register_raw_size[MAX_NUM_REGS] = {
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
10, 10, 10, 10,
|
10, 10, 10, 10,
|
10, 10, 10, 10,
|
10, 10, 10, 10,
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
4, 4, 4, 4,
|
16, 16, 16, 16,
|
16, 16, 16, 16,
|
16, 16, 16, 16,
|
16, 16, 16, 16,
|
4
|
4
|
};
|
};
|
|
|
/* i386_register_virtual_size[i] is the size in bytes of the virtual
|
/* i386_register_virtual_size[i] is the size in bytes of the virtual
|
type of register i. */
|
type of register i. */
|
int i386_register_virtual_size[MAX_NUM_REGS];
|
int i386_register_virtual_size[MAX_NUM_REGS];
|
|
|
|
|
/* This is the variable the is set with "set disassembly-flavor",
|
/* This is the variable the is set with "set disassembly-flavor",
|
and its legitimate values. */
|
and its legitimate values. */
|
static char att_flavor[] = "att";
|
static char att_flavor[] = "att";
|
static char intel_flavor[] = "intel";
|
static char intel_flavor[] = "intel";
|
static char *valid_flavors[] =
|
static char *valid_flavors[] =
|
{
|
{
|
att_flavor,
|
att_flavor,
|
intel_flavor,
|
intel_flavor,
|
NULL
|
NULL
|
};
|
};
|
static char *disassembly_flavor = att_flavor;
|
static char *disassembly_flavor = att_flavor;
|
|
|
static void i386_print_register PARAMS ((char *, int, int));
|
static void i386_print_register PARAMS ((char *, int, int));
|
|
|
/* This is used to keep the bfd arch_info in sync with the disassembly flavor. */
|
/* This is used to keep the bfd arch_info in sync with the disassembly flavor. */
|
static void set_disassembly_flavor_sfunc PARAMS ((char *, int, struct cmd_list_element *));
|
static void set_disassembly_flavor_sfunc PARAMS ((char *, int, struct cmd_list_element *));
|
static void set_disassembly_flavor PARAMS ((void));
|
static void set_disassembly_flavor PARAMS ((void));
|
|
|
/* Stdio style buffering was used to minimize calls to ptrace, but this
|
/* Stdio style buffering was used to minimize calls to ptrace, but this
|
buffering did not take into account that the code section being accessed
|
buffering did not take into account that the code section being accessed
|
may not be an even number of buffers long (even if the buffer is only
|
may not be an even number of buffers long (even if the buffer is only
|
sizeof(int) long). In cases where the code section size happened to
|
sizeof(int) long). In cases where the code section size happened to
|
be a non-integral number of buffers long, attempting to read the last
|
be a non-integral number of buffers long, attempting to read the last
|
buffer would fail. Simply using target_read_memory and ignoring errors,
|
buffer would fail. Simply using target_read_memory and ignoring errors,
|
rather than read_memory, is not the correct solution, since legitimate
|
rather than read_memory, is not the correct solution, since legitimate
|
access errors would then be totally ignored. To properly handle this
|
access errors would then be totally ignored. To properly handle this
|
situation and continue to use buffering would require that this code
|
situation and continue to use buffering would require that this code
|
be able to determine the minimum code section size granularity (not the
|
be able to determine the minimum code section size granularity (not the
|
alignment of the section itself, since the actual failing case that
|
alignment of the section itself, since the actual failing case that
|
pointed out this problem had a section alignment of 4 but was not a
|
pointed out this problem had a section alignment of 4 but was not a
|
multiple of 4 bytes long), on a target by target basis, and then
|
multiple of 4 bytes long), on a target by target basis, and then
|
adjust it's buffer size accordingly. This is messy, but potentially
|
adjust it's buffer size accordingly. This is messy, but potentially
|
feasible. It probably needs the bfd library's help and support. For
|
feasible. It probably needs the bfd library's help and support. For
|
now, the buffer size is set to 1. (FIXME -fnf) */
|
now, the buffer size is set to 1. (FIXME -fnf) */
|
|
|
#define CODESTREAM_BUFSIZ 1 /* Was sizeof(int), see note above. */
|
#define CODESTREAM_BUFSIZ 1 /* Was sizeof(int), see note above. */
|
static CORE_ADDR codestream_next_addr;
|
static CORE_ADDR codestream_next_addr;
|
static CORE_ADDR codestream_addr;
|
static CORE_ADDR codestream_addr;
|
static unsigned char codestream_buf[CODESTREAM_BUFSIZ];
|
static unsigned char codestream_buf[CODESTREAM_BUFSIZ];
|
static int codestream_off;
|
static int codestream_off;
|
static int codestream_cnt;
|
static int codestream_cnt;
|
|
|
#define codestream_tell() (codestream_addr + codestream_off)
|
#define codestream_tell() (codestream_addr + codestream_off)
|
#define codestream_peek() (codestream_cnt == 0 ? \
|
#define codestream_peek() (codestream_cnt == 0 ? \
|
codestream_fill(1): codestream_buf[codestream_off])
|
codestream_fill(1): codestream_buf[codestream_off])
|
#define codestream_get() (codestream_cnt-- == 0 ? \
|
#define codestream_get() (codestream_cnt-- == 0 ? \
|
codestream_fill(0) : codestream_buf[codestream_off++])
|
codestream_fill(0) : codestream_buf[codestream_off++])
|
|
|
static unsigned char
|
static unsigned char
|
codestream_fill (peek_flag)
|
codestream_fill (peek_flag)
|
int peek_flag;
|
int peek_flag;
|
{
|
{
|
codestream_addr = codestream_next_addr;
|
codestream_addr = codestream_next_addr;
|
codestream_next_addr += CODESTREAM_BUFSIZ;
|
codestream_next_addr += CODESTREAM_BUFSIZ;
|
codestream_off = 0;
|
codestream_off = 0;
|
codestream_cnt = CODESTREAM_BUFSIZ;
|
codestream_cnt = CODESTREAM_BUFSIZ;
|
read_memory (codestream_addr, (char *) codestream_buf, CODESTREAM_BUFSIZ);
|
read_memory (codestream_addr, (char *) codestream_buf, CODESTREAM_BUFSIZ);
|
|
|
if (peek_flag)
|
if (peek_flag)
|
return (codestream_peek ());
|
return (codestream_peek ());
|
else
|
else
|
return (codestream_get ());
|
return (codestream_get ());
|
}
|
}
|
|
|
static void
|
static void
|
codestream_seek (place)
|
codestream_seek (place)
|
CORE_ADDR place;
|
CORE_ADDR place;
|
{
|
{
|
codestream_next_addr = place / CODESTREAM_BUFSIZ;
|
codestream_next_addr = place / CODESTREAM_BUFSIZ;
|
codestream_next_addr *= CODESTREAM_BUFSIZ;
|
codestream_next_addr *= CODESTREAM_BUFSIZ;
|
codestream_cnt = 0;
|
codestream_cnt = 0;
|
codestream_fill (1);
|
codestream_fill (1);
|
while (codestream_tell () != place)
|
while (codestream_tell () != place)
|
codestream_get ();
|
codestream_get ();
|
}
|
}
|
|
|
static void
|
static void
|
codestream_read (buf, count)
|
codestream_read (buf, count)
|
unsigned char *buf;
|
unsigned char *buf;
|
int count;
|
int count;
|
{
|
{
|
unsigned char *p;
|
unsigned char *p;
|
int i;
|
int i;
|
p = buf;
|
p = buf;
|
for (i = 0; i < count; i++)
|
for (i = 0; i < count; i++)
|
*p++ = codestream_get ();
|
*p++ = codestream_get ();
|
}
|
}
|
|
|
/* next instruction is a jump, move to target */
|
/* next instruction is a jump, move to target */
|
|
|
static void
|
static void
|
i386_follow_jump ()
|
i386_follow_jump ()
|
{
|
{
|
unsigned char buf[4];
|
unsigned char buf[4];
|
long delta;
|
long delta;
|
|
|
int data16;
|
int data16;
|
CORE_ADDR pos;
|
CORE_ADDR pos;
|
|
|
pos = codestream_tell ();
|
pos = codestream_tell ();
|
|
|
data16 = 0;
|
data16 = 0;
|
if (codestream_peek () == 0x66)
|
if (codestream_peek () == 0x66)
|
{
|
{
|
codestream_get ();
|
codestream_get ();
|
data16 = 1;
|
data16 = 1;
|
}
|
}
|
|
|
switch (codestream_get ())
|
switch (codestream_get ())
|
{
|
{
|
case 0xe9:
|
case 0xe9:
|
/* relative jump: if data16 == 0, disp32, else disp16 */
|
/* relative jump: if data16 == 0, disp32, else disp16 */
|
if (data16)
|
if (data16)
|
{
|
{
|
codestream_read (buf, 2);
|
codestream_read (buf, 2);
|
delta = extract_signed_integer (buf, 2);
|
delta = extract_signed_integer (buf, 2);
|
|
|
/* include size of jmp inst (including the 0x66 prefix). */
|
/* include size of jmp inst (including the 0x66 prefix). */
|
pos += delta + 4;
|
pos += delta + 4;
|
}
|
}
|
else
|
else
|
{
|
{
|
codestream_read (buf, 4);
|
codestream_read (buf, 4);
|
delta = extract_signed_integer (buf, 4);
|
delta = extract_signed_integer (buf, 4);
|
|
|
pos += delta + 5;
|
pos += delta + 5;
|
}
|
}
|
break;
|
break;
|
case 0xeb:
|
case 0xeb:
|
/* relative jump, disp8 (ignore data16) */
|
/* relative jump, disp8 (ignore data16) */
|
codestream_read (buf, 1);
|
codestream_read (buf, 1);
|
/* Sign-extend it. */
|
/* Sign-extend it. */
|
delta = extract_signed_integer (buf, 1);
|
delta = extract_signed_integer (buf, 1);
|
|
|
pos += delta + 2;
|
pos += delta + 2;
|
break;
|
break;
|
}
|
}
|
codestream_seek (pos);
|
codestream_seek (pos);
|
}
|
}
|
|
|
/*
|
/*
|
* find & return amound a local space allocated, and advance codestream to
|
* find & return amound a local space allocated, and advance codestream to
|
* first register push (if any)
|
* first register push (if any)
|
*
|
*
|
* if entry sequence doesn't make sense, return -1, and leave
|
* if entry sequence doesn't make sense, return -1, and leave
|
* codestream pointer random
|
* codestream pointer random
|
*/
|
*/
|
|
|
static long
|
static long
|
i386_get_frame_setup (pc)
|
i386_get_frame_setup (pc)
|
CORE_ADDR pc;
|
CORE_ADDR pc;
|
{
|
{
|
unsigned char op;
|
unsigned char op;
|
|
|
codestream_seek (pc);
|
codestream_seek (pc);
|
|
|
i386_follow_jump ();
|
i386_follow_jump ();
|
|
|
op = codestream_get ();
|
op = codestream_get ();
|
|
|
if (op == 0x58) /* popl %eax */
|
if (op == 0x58) /* popl %eax */
|
{
|
{
|
/*
|
/*
|
* this function must start with
|
* this function must start with
|
*
|
*
|
* popl %eax 0x58
|
* popl %eax 0x58
|
* xchgl %eax, (%esp) 0x87 0x04 0x24
|
* xchgl %eax, (%esp) 0x87 0x04 0x24
|
* or xchgl %eax, 0(%esp) 0x87 0x44 0x24 0x00
|
* or xchgl %eax, 0(%esp) 0x87 0x44 0x24 0x00
|
*
|
*
|
* (the system 5 compiler puts out the second xchg
|
* (the system 5 compiler puts out the second xchg
|
* inst, and the assembler doesn't try to optimize it,
|
* inst, and the assembler doesn't try to optimize it,
|
* so the 'sib' form gets generated)
|
* so the 'sib' form gets generated)
|
*
|
*
|
* this sequence is used to get the address of the return
|
* this sequence is used to get the address of the return
|
* buffer for a function that returns a structure
|
* buffer for a function that returns a structure
|
*/
|
*/
|
int pos;
|
int pos;
|
unsigned char buf[4];
|
unsigned char buf[4];
|
static unsigned char proto1[3] =
|
static unsigned char proto1[3] =
|
{0x87, 0x04, 0x24};
|
{0x87, 0x04, 0x24};
|
static unsigned char proto2[4] =
|
static unsigned char proto2[4] =
|
{0x87, 0x44, 0x24, 0x00};
|
{0x87, 0x44, 0x24, 0x00};
|
pos = codestream_tell ();
|
pos = codestream_tell ();
|
codestream_read (buf, 4);
|
codestream_read (buf, 4);
|
if (memcmp (buf, proto1, 3) == 0)
|
if (memcmp (buf, proto1, 3) == 0)
|
pos += 3;
|
pos += 3;
|
else if (memcmp (buf, proto2, 4) == 0)
|
else if (memcmp (buf, proto2, 4) == 0)
|
pos += 4;
|
pos += 4;
|
|
|
codestream_seek (pos);
|
codestream_seek (pos);
|
op = codestream_get (); /* update next opcode */
|
op = codestream_get (); /* update next opcode */
|
}
|
}
|
|
|
if (op == 0x68 || op == 0x6a)
|
if (op == 0x68 || op == 0x6a)
|
{
|
{
|
/*
|
/*
|
* this function may start with
|
* this function may start with
|
*
|
*
|
* pushl constant
|
* pushl constant
|
* call _probe
|
* call _probe
|
* addl $4, %esp
|
* addl $4, %esp
|
* followed by
|
* followed by
|
* pushl %ebp
|
* pushl %ebp
|
* etc.
|
* etc.
|
*/
|
*/
|
int pos;
|
int pos;
|
unsigned char buf[8];
|
unsigned char buf[8];
|
|
|
/* Skip past the pushl instruction; it has either a one-byte
|
/* Skip past the pushl instruction; it has either a one-byte
|
or a four-byte operand, depending on the opcode. */
|
or a four-byte operand, depending on the opcode. */
|
pos = codestream_tell ();
|
pos = codestream_tell ();
|
if (op == 0x68)
|
if (op == 0x68)
|
pos += 4;
|
pos += 4;
|
else
|
else
|
pos += 1;
|
pos += 1;
|
codestream_seek (pos);
|
codestream_seek (pos);
|
|
|
/* Read the following 8 bytes, which should be "call _probe" (6 bytes)
|
/* Read the following 8 bytes, which should be "call _probe" (6 bytes)
|
followed by "addl $4,%esp" (2 bytes). */
|
followed by "addl $4,%esp" (2 bytes). */
|
codestream_read (buf, sizeof (buf));
|
codestream_read (buf, sizeof (buf));
|
if (buf[0] == 0xe8 && buf[6] == 0xc4 && buf[7] == 0x4)
|
if (buf[0] == 0xe8 && buf[6] == 0xc4 && buf[7] == 0x4)
|
pos += sizeof (buf);
|
pos += sizeof (buf);
|
codestream_seek (pos);
|
codestream_seek (pos);
|
op = codestream_get (); /* update next opcode */
|
op = codestream_get (); /* update next opcode */
|
}
|
}
|
|
|
if (op == 0x55) /* pushl %ebp */
|
if (op == 0x55) /* pushl %ebp */
|
{
|
{
|
/* check for movl %esp, %ebp - can be written two ways */
|
/* check for movl %esp, %ebp - can be written two ways */
|
switch (codestream_get ())
|
switch (codestream_get ())
|
{
|
{
|
case 0x8b:
|
case 0x8b:
|
if (codestream_get () != 0xec)
|
if (codestream_get () != 0xec)
|
return (-1);
|
return (-1);
|
break;
|
break;
|
case 0x89:
|
case 0x89:
|
if (codestream_get () != 0xe5)
|
if (codestream_get () != 0xe5)
|
return (-1);
|
return (-1);
|
break;
|
break;
|
default:
|
default:
|
return (-1);
|
return (-1);
|
}
|
}
|
/* check for stack adjustment
|
/* check for stack adjustment
|
|
|
* subl $XXX, %esp
|
* subl $XXX, %esp
|
*
|
*
|
* note: you can't subtract a 16 bit immediate
|
* note: you can't subtract a 16 bit immediate
|
* from a 32 bit reg, so we don't have to worry
|
* from a 32 bit reg, so we don't have to worry
|
* about a data16 prefix
|
* about a data16 prefix
|
*/
|
*/
|
op = codestream_peek ();
|
op = codestream_peek ();
|
if (op == 0x83)
|
if (op == 0x83)
|
{
|
{
|
/* subl with 8 bit immed */
|
/* subl with 8 bit immed */
|
codestream_get ();
|
codestream_get ();
|
if (codestream_get () != 0xec)
|
if (codestream_get () != 0xec)
|
/* Some instruction starting with 0x83 other than subl. */
|
/* Some instruction starting with 0x83 other than subl. */
|
{
|
{
|
codestream_seek (codestream_tell () - 2);
|
codestream_seek (codestream_tell () - 2);
|
return 0;
|
return 0;
|
}
|
}
|
/* subl with signed byte immediate
|
/* subl with signed byte immediate
|
* (though it wouldn't make sense to be negative)
|
* (though it wouldn't make sense to be negative)
|
*/
|
*/
|
return (codestream_get ());
|
return (codestream_get ());
|
}
|
}
|
else if (op == 0x81)
|
else if (op == 0x81)
|
{
|
{
|
char buf[4];
|
char buf[4];
|
/* Maybe it is subl with 32 bit immedediate. */
|
/* Maybe it is subl with 32 bit immedediate. */
|
codestream_get ();
|
codestream_get ();
|
if (codestream_get () != 0xec)
|
if (codestream_get () != 0xec)
|
/* Some instruction starting with 0x81 other than subl. */
|
/* Some instruction starting with 0x81 other than subl. */
|
{
|
{
|
codestream_seek (codestream_tell () - 2);
|
codestream_seek (codestream_tell () - 2);
|
return 0;
|
return 0;
|
}
|
}
|
/* It is subl with 32 bit immediate. */
|
/* It is subl with 32 bit immediate. */
|
codestream_read ((unsigned char *) buf, 4);
|
codestream_read ((unsigned char *) buf, 4);
|
return extract_signed_integer (buf, 4);
|
return extract_signed_integer (buf, 4);
|
}
|
}
|
else
|
else
|
{
|
{
|
return (0);
|
return (0);
|
}
|
}
|
}
|
}
|
else if (op == 0xc8)
|
else if (op == 0xc8)
|
{
|
{
|
char buf[2];
|
char buf[2];
|
/* enter instruction: arg is 16 bit unsigned immed */
|
/* enter instruction: arg is 16 bit unsigned immed */
|
codestream_read ((unsigned char *) buf, 2);
|
codestream_read ((unsigned char *) buf, 2);
|
codestream_get (); /* flush final byte of enter instruction */
|
codestream_get (); /* flush final byte of enter instruction */
|
return extract_unsigned_integer (buf, 2);
|
return extract_unsigned_integer (buf, 2);
|
}
|
}
|
return (-1);
|
return (-1);
|
}
|
}
|
|
|
/* Return number of args passed to a frame.
|
/* Return number of args passed to a frame.
|
Can return -1, meaning no way to tell. */
|
Can return -1, meaning no way to tell. */
|
|
|
int
|
int
|
i386_frame_num_args (fi)
|
i386_frame_num_args (fi)
|
struct frame_info *fi;
|
struct frame_info *fi;
|
{
|
{
|
#if 1
|
#if 1
|
return -1;
|
return -1;
|
#else
|
#else
|
/* This loses because not only might the compiler not be popping the
|
/* This loses because not only might the compiler not be popping the
|
args right after the function call, it might be popping args from both
|
args right after the function call, it might be popping args from both
|
this call and a previous one, and we would say there are more args
|
this call and a previous one, and we would say there are more args
|
than there really are. */
|
than there really are. */
|
|
|
int retpc;
|
int retpc;
|
unsigned char op;
|
unsigned char op;
|
struct frame_info *pfi;
|
struct frame_info *pfi;
|
|
|
/* on the 386, the instruction following the call could be:
|
/* on the 386, the instruction following the call could be:
|
popl %ecx - one arg
|
popl %ecx - one arg
|
addl $imm, %esp - imm/4 args; imm may be 8 or 32 bits
|
addl $imm, %esp - imm/4 args; imm may be 8 or 32 bits
|
anything else - zero args */
|
anything else - zero args */
|
|
|
int frameless;
|
int frameless;
|
|
|
frameless = FRAMELESS_FUNCTION_INVOCATION (fi);
|
frameless = FRAMELESS_FUNCTION_INVOCATION (fi);
|
if (frameless)
|
if (frameless)
|
/* In the absence of a frame pointer, GDB doesn't get correct values
|
/* In the absence of a frame pointer, GDB doesn't get correct values
|
for nameless arguments. Return -1, so it doesn't print any
|
for nameless arguments. Return -1, so it doesn't print any
|
nameless arguments. */
|
nameless arguments. */
|
return -1;
|
return -1;
|
|
|
pfi = get_prev_frame (fi);
|
pfi = get_prev_frame (fi);
|
if (pfi == 0)
|
if (pfi == 0)
|
{
|
{
|
/* Note: this can happen if we are looking at the frame for
|
/* Note: this can happen if we are looking at the frame for
|
main, because FRAME_CHAIN_VALID won't let us go into
|
main, because FRAME_CHAIN_VALID won't let us go into
|
start. If we have debugging symbols, that's not really
|
start. If we have debugging symbols, that's not really
|
a big deal; it just means it will only show as many arguments
|
a big deal; it just means it will only show as many arguments
|
to main as are declared. */
|
to main as are declared. */
|
return -1;
|
return -1;
|
}
|
}
|
else
|
else
|
{
|
{
|
retpc = pfi->pc;
|
retpc = pfi->pc;
|
op = read_memory_integer (retpc, 1);
|
op = read_memory_integer (retpc, 1);
|
if (op == 0x59)
|
if (op == 0x59)
|
/* pop %ecx */
|
/* pop %ecx */
|
return 1;
|
return 1;
|
else if (op == 0x83)
|
else if (op == 0x83)
|
{
|
{
|
op = read_memory_integer (retpc + 1, 1);
|
op = read_memory_integer (retpc + 1, 1);
|
if (op == 0xc4)
|
if (op == 0xc4)
|
/* addl $<signed imm 8 bits>, %esp */
|
/* addl $<signed imm 8 bits>, %esp */
|
return (read_memory_integer (retpc + 2, 1) & 0xff) / 4;
|
return (read_memory_integer (retpc + 2, 1) & 0xff) / 4;
|
else
|
else
|
return 0;
|
return 0;
|
}
|
}
|
else if (op == 0x81)
|
else if (op == 0x81)
|
{ /* add with 32 bit immediate */
|
{ /* add with 32 bit immediate */
|
op = read_memory_integer (retpc + 1, 1);
|
op = read_memory_integer (retpc + 1, 1);
|
if (op == 0xc4)
|
if (op == 0xc4)
|
/* addl $<imm 32>, %esp */
|
/* addl $<imm 32>, %esp */
|
return read_memory_integer (retpc + 2, 4) / 4;
|
return read_memory_integer (retpc + 2, 4) / 4;
|
else
|
else
|
return 0;
|
return 0;
|
}
|
}
|
else
|
else
|
{
|
{
|
return 0;
|
return 0;
|
}
|
}
|
}
|
}
|
#endif
|
#endif
|
}
|
}
|
|
|
/*
|
/*
|
* parse the first few instructions of the function to see
|
* parse the first few instructions of the function to see
|
* what registers were stored.
|
* what registers were stored.
|
*
|
*
|
* We handle these cases:
|
* We handle these cases:
|
*
|
*
|
* The startup sequence can be at the start of the function,
|
* The startup sequence can be at the start of the function,
|
* or the function can start with a branch to startup code at the end.
|
* or the function can start with a branch to startup code at the end.
|
*
|
*
|
* %ebp can be set up with either the 'enter' instruction, or
|
* %ebp can be set up with either the 'enter' instruction, or
|
* 'pushl %ebp, movl %esp, %ebp' (enter is too slow to be useful,
|
* 'pushl %ebp, movl %esp, %ebp' (enter is too slow to be useful,
|
* but was once used in the sys5 compiler)
|
* but was once used in the sys5 compiler)
|
*
|
*
|
* Local space is allocated just below the saved %ebp by either the
|
* Local space is allocated just below the saved %ebp by either the
|
* 'enter' instruction, or by 'subl $<size>, %esp'. 'enter' has
|
* 'enter' instruction, or by 'subl $<size>, %esp'. 'enter' has
|
* a 16 bit unsigned argument for space to allocate, and the
|
* a 16 bit unsigned argument for space to allocate, and the
|
* 'addl' instruction could have either a signed byte, or
|
* 'addl' instruction could have either a signed byte, or
|
* 32 bit immediate.
|
* 32 bit immediate.
|
*
|
*
|
* Next, the registers used by this function are pushed. In
|
* Next, the registers used by this function are pushed. In
|
* the sys5 compiler they will always be in the order: %edi, %esi, %ebx
|
* the sys5 compiler they will always be in the order: %edi, %esi, %ebx
|
* (and sometimes a harmless bug causes it to also save but not restore %eax);
|
* (and sometimes a harmless bug causes it to also save but not restore %eax);
|
* however, the code below is willing to see the pushes in any order,
|
* however, the code below is willing to see the pushes in any order,
|
* and will handle up to 8 of them.
|
* and will handle up to 8 of them.
|
*
|
*
|
* If the setup sequence is at the end of the function, then the
|
* If the setup sequence is at the end of the function, then the
|
* next instruction will be a branch back to the start.
|
* next instruction will be a branch back to the start.
|
*/
|
*/
|
|
|
void
|
void
|
i386_frame_init_saved_regs (fip)
|
i386_frame_init_saved_regs (fip)
|
struct frame_info *fip;
|
struct frame_info *fip;
|
{
|
{
|
long locals = -1;
|
long locals = -1;
|
unsigned char op;
|
unsigned char op;
|
CORE_ADDR dummy_bottom;
|
CORE_ADDR dummy_bottom;
|
CORE_ADDR adr;
|
CORE_ADDR adr;
|
CORE_ADDR pc;
|
CORE_ADDR pc;
|
int i;
|
int i;
|
|
|
if (fip->saved_regs)
|
if (fip->saved_regs)
|
return;
|
return;
|
|
|
frame_saved_regs_zalloc (fip);
|
frame_saved_regs_zalloc (fip);
|
|
|
/* if frame is the end of a dummy, compute where the
|
/* if frame is the end of a dummy, compute where the
|
* beginning would be
|
* beginning would be
|
*/
|
*/
|
dummy_bottom = fip->frame - 4 - REGISTER_BYTES - CALL_DUMMY_LENGTH;
|
dummy_bottom = fip->frame - 4 - REGISTER_BYTES - CALL_DUMMY_LENGTH;
|
|
|
/* check if the PC is in the stack, in a dummy frame */
|
/* check if the PC is in the stack, in a dummy frame */
|
if (dummy_bottom <= fip->pc && fip->pc <= fip->frame)
|
if (dummy_bottom <= fip->pc && fip->pc <= fip->frame)
|
{
|
{
|
/* all regs were saved by push_call_dummy () */
|
/* all regs were saved by push_call_dummy () */
|
adr = fip->frame;
|
adr = fip->frame;
|
for (i = 0; i < NUM_REGS; i++)
|
for (i = 0; i < NUM_REGS; i++)
|
{
|
{
|
adr -= REGISTER_RAW_SIZE (i);
|
adr -= REGISTER_RAW_SIZE (i);
|
fip->saved_regs[i] = adr;
|
fip->saved_regs[i] = adr;
|
}
|
}
|
return;
|
return;
|
}
|
}
|
|
|
pc = get_pc_function_start (fip->pc);
|
pc = get_pc_function_start (fip->pc);
|
if (pc != 0)
|
if (pc != 0)
|
locals = i386_get_frame_setup (pc);
|
locals = i386_get_frame_setup (pc);
|
|
|
if (locals >= 0)
|
if (locals >= 0)
|
{
|
{
|
adr = fip->frame - 4 - locals;
|
adr = fip->frame - 4 - locals;
|
for (i = 0; i < 8; i++)
|
for (i = 0; i < 8; i++)
|
{
|
{
|
op = codestream_get ();
|
op = codestream_get ();
|
if (op < 0x50 || op > 0x57)
|
if (op < 0x50 || op > 0x57)
|
break;
|
break;
|
#ifdef I386_REGNO_TO_SYMMETRY
|
#ifdef I386_REGNO_TO_SYMMETRY
|
/* Dynix uses different internal numbering. Ick. */
|
/* Dynix uses different internal numbering. Ick. */
|
fip->saved_regs[I386_REGNO_TO_SYMMETRY (op - 0x50)] = adr;
|
fip->saved_regs[I386_REGNO_TO_SYMMETRY (op - 0x50)] = adr;
|
#else
|
#else
|
fip->saved_regs[op - 0x50] = adr;
|
fip->saved_regs[op - 0x50] = adr;
|
#endif
|
#endif
|
adr -= 4;
|
adr -= 4;
|
}
|
}
|
}
|
}
|
|
|
fip->saved_regs[PC_REGNUM] = fip->frame + 4;
|
fip->saved_regs[PC_REGNUM] = fip->frame + 4;
|
fip->saved_regs[FP_REGNUM] = fip->frame;
|
fip->saved_regs[FP_REGNUM] = fip->frame;
|
}
|
}
|
|
|
/* return pc of first real instruction */
|
/* return pc of first real instruction */
|
|
|
int
|
int
|
i386_skip_prologue (pc)
|
i386_skip_prologue (pc)
|
int pc;
|
int pc;
|
{
|
{
|
unsigned char op;
|
unsigned char op;
|
int i;
|
int i;
|
static unsigned char pic_pat[6] =
|
static unsigned char pic_pat[6] =
|
{0xe8, 0, 0, 0, 0, /* call 0x0 */
|
{0xe8, 0, 0, 0, 0, /* call 0x0 */
|
0x5b, /* popl %ebx */
|
0x5b, /* popl %ebx */
|
};
|
};
|
CORE_ADDR pos;
|
CORE_ADDR pos;
|
|
|
if (i386_get_frame_setup (pc) < 0)
|
if (i386_get_frame_setup (pc) < 0)
|
return (pc);
|
return (pc);
|
|
|
/* found valid frame setup - codestream now points to
|
/* found valid frame setup - codestream now points to
|
* start of push instructions for saving registers
|
* start of push instructions for saving registers
|
*/
|
*/
|
|
|
/* skip over register saves */
|
/* skip over register saves */
|
for (i = 0; i < 8; i++)
|
for (i = 0; i < 8; i++)
|
{
|
{
|
op = codestream_peek ();
|
op = codestream_peek ();
|
/* break if not pushl inst */
|
/* break if not pushl inst */
|
if (op < 0x50 || op > 0x57)
|
if (op < 0x50 || op > 0x57)
|
break;
|
break;
|
codestream_get ();
|
codestream_get ();
|
}
|
}
|
|
|
/* The native cc on SVR4 in -K PIC mode inserts the following code to get
|
/* The native cc on SVR4 in -K PIC mode inserts the following code to get
|
the address of the global offset table (GOT) into register %ebx.
|
the address of the global offset table (GOT) into register %ebx.
|
call 0x0
|
call 0x0
|
popl %ebx
|
popl %ebx
|
movl %ebx,x(%ebp) (optional)
|
movl %ebx,x(%ebp) (optional)
|
addl y,%ebx
|
addl y,%ebx
|
This code is with the rest of the prologue (at the end of the
|
This code is with the rest of the prologue (at the end of the
|
function), so we have to skip it to get to the first real
|
function), so we have to skip it to get to the first real
|
instruction at the start of the function. */
|
instruction at the start of the function. */
|
|
|
pos = codestream_tell ();
|
pos = codestream_tell ();
|
for (i = 0; i < 6; i++)
|
for (i = 0; i < 6; i++)
|
{
|
{
|
op = codestream_get ();
|
op = codestream_get ();
|
if (pic_pat[i] != op)
|
if (pic_pat[i] != op)
|
break;
|
break;
|
}
|
}
|
if (i == 6)
|
if (i == 6)
|
{
|
{
|
unsigned char buf[4];
|
unsigned char buf[4];
|
long delta = 6;
|
long delta = 6;
|
|
|
op = codestream_get ();
|
op = codestream_get ();
|
if (op == 0x89) /* movl %ebx, x(%ebp) */
|
if (op == 0x89) /* movl %ebx, x(%ebp) */
|
{
|
{
|
op = codestream_get ();
|
op = codestream_get ();
|
if (op == 0x5d) /* one byte offset from %ebp */
|
if (op == 0x5d) /* one byte offset from %ebp */
|
{
|
{
|
delta += 3;
|
delta += 3;
|
codestream_read (buf, 1);
|
codestream_read (buf, 1);
|
}
|
}
|
else if (op == 0x9d) /* four byte offset from %ebp */
|
else if (op == 0x9d) /* four byte offset from %ebp */
|
{
|
{
|
delta += 6;
|
delta += 6;
|
codestream_read (buf, 4);
|
codestream_read (buf, 4);
|
}
|
}
|
else /* unexpected instruction */
|
else /* unexpected instruction */
|
delta = -1;
|
delta = -1;
|
op = codestream_get ();
|
op = codestream_get ();
|
}
|
}
|
/* addl y,%ebx */
|
/* addl y,%ebx */
|
if (delta > 0 && op == 0x81 && codestream_get () == 0xc3)
|
if (delta > 0 && op == 0x81 && codestream_get () == 0xc3)
|
{
|
{
|
pos += delta + 6;
|
pos += delta + 6;
|
}
|
}
|
}
|
}
|
codestream_seek (pos);
|
codestream_seek (pos);
|
|
|
i386_follow_jump ();
|
i386_follow_jump ();
|
|
|
return (codestream_tell ());
|
return (codestream_tell ());
|
}
|
}
|
|
|
void
|
void
|
i386_push_dummy_frame ()
|
i386_push_dummy_frame ()
|
{
|
{
|
CORE_ADDR sp = read_register (SP_REGNUM);
|
CORE_ADDR sp = read_register (SP_REGNUM);
|
int regnum;
|
int regnum;
|
char regbuf[MAX_REGISTER_RAW_SIZE];
|
char regbuf[MAX_REGISTER_RAW_SIZE];
|
|
|
sp = push_word (sp, read_register (PC_REGNUM));
|
sp = push_word (sp, read_register (PC_REGNUM));
|
sp = push_word (sp, read_register (FP_REGNUM));
|
sp = push_word (sp, read_register (FP_REGNUM));
|
write_register (FP_REGNUM, sp);
|
write_register (FP_REGNUM, sp);
|
for (regnum = 0; regnum < NUM_REGS; regnum++)
|
for (regnum = 0; regnum < NUM_REGS; regnum++)
|
{
|
{
|
read_register_gen (regnum, regbuf);
|
read_register_gen (regnum, regbuf);
|
sp = push_bytes (sp, regbuf, REGISTER_RAW_SIZE (regnum));
|
sp = push_bytes (sp, regbuf, REGISTER_RAW_SIZE (regnum));
|
}
|
}
|
write_register (SP_REGNUM, sp);
|
write_register (SP_REGNUM, sp);
|
}
|
}
|
|
|
void
|
void
|
i386_pop_frame ()
|
i386_pop_frame ()
|
{
|
{
|
struct frame_info *frame = get_current_frame ();
|
struct frame_info *frame = get_current_frame ();
|
CORE_ADDR fp;
|
CORE_ADDR fp;
|
int regnum;
|
int regnum;
|
char regbuf[MAX_REGISTER_RAW_SIZE];
|
char regbuf[MAX_REGISTER_RAW_SIZE];
|
|
|
fp = FRAME_FP (frame);
|
fp = FRAME_FP (frame);
|
i386_frame_init_saved_regs (frame);
|
i386_frame_init_saved_regs (frame);
|
|
|
for (regnum = 0; regnum < NUM_REGS; regnum++)
|
for (regnum = 0; regnum < NUM_REGS; regnum++)
|
{
|
{
|
CORE_ADDR adr;
|
CORE_ADDR adr;
|
adr = frame->saved_regs[regnum];
|
adr = frame->saved_regs[regnum];
|
if (adr)
|
if (adr)
|
{
|
{
|
read_memory (adr, regbuf, REGISTER_RAW_SIZE (regnum));
|
read_memory (adr, regbuf, REGISTER_RAW_SIZE (regnum));
|
write_register_bytes (REGISTER_BYTE (regnum), regbuf,
|
write_register_bytes (REGISTER_BYTE (regnum), regbuf,
|
REGISTER_RAW_SIZE (regnum));
|
REGISTER_RAW_SIZE (regnum));
|
}
|
}
|
}
|
}
|
write_register (FP_REGNUM, read_memory_integer (fp, 4));
|
write_register (FP_REGNUM, read_memory_integer (fp, 4));
|
write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));
|
write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));
|
write_register (SP_REGNUM, fp + 8);
|
write_register (SP_REGNUM, fp + 8);
|
flush_cached_frames ();
|
flush_cached_frames ();
|
}
|
}
|
|
|
#ifdef GET_LONGJMP_TARGET
|
#ifdef GET_LONGJMP_TARGET
|
|
|
/* Figure out where the longjmp will land. Slurp the args out of the stack.
|
/* Figure out where the longjmp will land. Slurp the args out of the stack.
|
We expect the first arg to be a pointer to the jmp_buf structure from which
|
We expect the first arg to be a pointer to the jmp_buf structure from which
|
we extract the pc (JB_PC) that we will land at. The pc is copied into PC.
|
we extract the pc (JB_PC) that we will land at. The pc is copied into PC.
|
This routine returns true on success. */
|
This routine returns true on success. */
|
|
|
int
|
int
|
get_longjmp_target (pc)
|
get_longjmp_target (pc)
|
CORE_ADDR *pc;
|
CORE_ADDR *pc;
|
{
|
{
|
char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
|
char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
|
CORE_ADDR sp, jb_addr;
|
CORE_ADDR sp, jb_addr;
|
|
|
sp = read_register (SP_REGNUM);
|
sp = read_register (SP_REGNUM);
|
|
|
if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack */
|
if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack */
|
buf,
|
buf,
|
TARGET_PTR_BIT / TARGET_CHAR_BIT))
|
TARGET_PTR_BIT / TARGET_CHAR_BIT))
|
return 0;
|
return 0;
|
|
|
jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
|
jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
|
|
|
if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
|
if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
|
TARGET_PTR_BIT / TARGET_CHAR_BIT))
|
TARGET_PTR_BIT / TARGET_CHAR_BIT))
|
return 0;
|
return 0;
|
|
|
*pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
|
*pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
|
|
|
return 1;
|
return 1;
|
}
|
}
|
|
|
#endif /* GET_LONGJMP_TARGET */
|
#endif /* GET_LONGJMP_TARGET */
|
|
|
/* These registers are used for returning integers (and on some
|
/* These registers are used for returning integers (and on some
|
targets also for returning `struct' and `union' values when their
|
targets also for returning `struct' and `union' values when their
|
size and alignment match an integer type. */
|
size and alignment match an integer type. */
|
#define LOW_RETURN_REGNUM 0 /* %eax */
|
#define LOW_RETURN_REGNUM 0 /* %eax */
|
#define HIGH_RETURN_REGNUM 2 /* %edx */
|
#define HIGH_RETURN_REGNUM 2 /* %edx */
|
|
|
/* Extract from an array REGBUF containing the (raw) register state, a
|
/* Extract from an array REGBUF containing the (raw) register state, a
|
function return value of TYPE, and copy that, in virtual format,
|
function return value of TYPE, and copy that, in virtual format,
|
into VALBUF. */
|
into VALBUF. */
|
|
|
void
|
void
|
i386_extract_return_value (struct type *type, char *regbuf, char *valbuf)
|
i386_extract_return_value (struct type *type, char *regbuf, char *valbuf)
|
{
|
{
|
int len = TYPE_LENGTH (type);
|
int len = TYPE_LENGTH (type);
|
|
|
if (TYPE_CODE_FLT == TYPE_CODE (type))
|
if (TYPE_CODE_FLT == TYPE_CODE (type))
|
{
|
{
|
if (NUM_FREGS == 0)
|
if (NUM_FREGS == 0)
|
{
|
{
|
warning ("Cannot find floating-point return value.");
|
warning ("Cannot find floating-point return value.");
|
memset (valbuf, 0, len);
|
memset (valbuf, 0, len);
|
}
|
}
|
|
|
/* Floating-point return values can be found in %st(0). */
|
/* Floating-point return values can be found in %st(0). */
|
if (len == TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT
|
if (len == TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT
|
&& TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext)
|
&& TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext)
|
{
|
{
|
/* Copy straight over, but take care of the padding. */
|
/* Copy straight over, but take care of the padding. */
|
memcpy (valbuf, ®buf[REGISTER_BYTE (FP0_REGNUM)],
|
memcpy (valbuf, ®buf[REGISTER_BYTE (FP0_REGNUM)],
|
FPU_REG_RAW_SIZE);
|
FPU_REG_RAW_SIZE);
|
memset (valbuf + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
|
memset (valbuf + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
|
}
|
}
|
else
|
else
|
{
|
{
|
/* Convert the extended floating-point number found in
|
/* Convert the extended floating-point number found in
|
%st(0) to the desired type. This is probably not exactly
|
%st(0) to the desired type. This is probably not exactly
|
how it would happen on the target itself, but it is the
|
how it would happen on the target itself, but it is the
|
best we can do. */
|
best we can do. */
|
DOUBLEST val;
|
DOUBLEST val;
|
floatformat_to_doublest (&floatformat_i387_ext,
|
floatformat_to_doublest (&floatformat_i387_ext,
|
®buf[REGISTER_BYTE (FP0_REGNUM)], &val);
|
®buf[REGISTER_BYTE (FP0_REGNUM)], &val);
|
store_floating (valbuf, TYPE_LENGTH (type), val);
|
store_floating (valbuf, TYPE_LENGTH (type), val);
|
}
|
}
|
}
|
}
|
else
|
else
|
{
|
{
|
int low_size = REGISTER_RAW_SIZE (LOW_RETURN_REGNUM);
|
int low_size = REGISTER_RAW_SIZE (LOW_RETURN_REGNUM);
|
int high_size = REGISTER_RAW_SIZE (HIGH_RETURN_REGNUM);
|
int high_size = REGISTER_RAW_SIZE (HIGH_RETURN_REGNUM);
|
|
|
if (len <= low_size)
|
if (len <= low_size)
|
memcpy (valbuf, ®buf[REGISTER_BYTE (LOW_RETURN_REGNUM)], len);
|
memcpy (valbuf, ®buf[REGISTER_BYTE (LOW_RETURN_REGNUM)], len);
|
else if (len <= (low_size + high_size))
|
else if (len <= (low_size + high_size))
|
{
|
{
|
memcpy (valbuf,
|
memcpy (valbuf,
|
®buf[REGISTER_BYTE (LOW_RETURN_REGNUM)], low_size);
|
®buf[REGISTER_BYTE (LOW_RETURN_REGNUM)], low_size);
|
memcpy (valbuf + low_size,
|
memcpy (valbuf + low_size,
|
®buf[REGISTER_BYTE (HIGH_RETURN_REGNUM)], len - low_size);
|
®buf[REGISTER_BYTE (HIGH_RETURN_REGNUM)], len - low_size);
|
}
|
}
|
else
|
else
|
internal_error ("Cannot extract return value of %d bytes long.", len);
|
internal_error ("Cannot extract return value of %d bytes long.", len);
|
}
|
}
|
}
|
}
|
|
|
/* Convert data from raw format for register REGNUM in buffer FROM to
|
/* Convert data from raw format for register REGNUM in buffer FROM to
|
virtual format with type TYPE in buffer TO. In principle both
|
virtual format with type TYPE in buffer TO. In principle both
|
formats are identical except that the virtual format has two extra
|
formats are identical except that the virtual format has two extra
|
bytes appended that aren't used. We set these to zero. */
|
bytes appended that aren't used. We set these to zero. */
|
|
|
void
|
void
|
i386_register_convert_to_virtual (int regnum, struct type *type,
|
i386_register_convert_to_virtual (int regnum, struct type *type,
|
char *from, char *to)
|
char *from, char *to)
|
{
|
{
|
/* Copy straight over, but take care of the padding. */
|
/* Copy straight over, but take care of the padding. */
|
memcpy (to, from, FPU_REG_RAW_SIZE);
|
memcpy (to, from, FPU_REG_RAW_SIZE);
|
memset (to + FPU_REG_RAW_SIZE, 0, TYPE_LENGTH (type) - FPU_REG_RAW_SIZE);
|
memset (to + FPU_REG_RAW_SIZE, 0, TYPE_LENGTH (type) - FPU_REG_RAW_SIZE);
|
}
|
}
|
|
|
/* Convert data from virtual format with type TYPE in buffer FROM to
|
/* Convert data from virtual format with type TYPE in buffer FROM to
|
raw format for register REGNUM in buffer TO. Simply omit the two
|
raw format for register REGNUM in buffer TO. Simply omit the two
|
unused bytes. */
|
unused bytes. */
|
|
|
void
|
void
|
i386_register_convert_to_raw (struct type *type, int regnum,
|
i386_register_convert_to_raw (struct type *type, int regnum,
|
char *from, char *to)
|
char *from, char *to)
|
{
|
{
|
memcpy (to, from, FPU_REG_RAW_SIZE);
|
memcpy (to, from, FPU_REG_RAW_SIZE);
|
}
|
}
|
|
|
|
|
#ifdef I386V4_SIGTRAMP_SAVED_PC
|
#ifdef I386V4_SIGTRAMP_SAVED_PC
|
/* Get saved user PC for sigtramp from the pushed ucontext on the stack
|
/* Get saved user PC for sigtramp from the pushed ucontext on the stack
|
for all three variants of SVR4 sigtramps. */
|
for all three variants of SVR4 sigtramps. */
|
|
|
CORE_ADDR
|
CORE_ADDR
|
i386v4_sigtramp_saved_pc (frame)
|
i386v4_sigtramp_saved_pc (frame)
|
struct frame_info *frame;
|
struct frame_info *frame;
|
{
|
{
|
CORE_ADDR saved_pc_offset = 4;
|
CORE_ADDR saved_pc_offset = 4;
|
char *name = NULL;
|
char *name = NULL;
|
|
|
find_pc_partial_function (frame->pc, &name, NULL, NULL);
|
find_pc_partial_function (frame->pc, &name, NULL, NULL);
|
if (name)
|
if (name)
|
{
|
{
|
if (STREQ (name, "_sigreturn"))
|
if (STREQ (name, "_sigreturn"))
|
saved_pc_offset = 132 + 14 * 4;
|
saved_pc_offset = 132 + 14 * 4;
|
else if (STREQ (name, "_sigacthandler"))
|
else if (STREQ (name, "_sigacthandler"))
|
saved_pc_offset = 80 + 14 * 4;
|
saved_pc_offset = 80 + 14 * 4;
|
else if (STREQ (name, "sigvechandler"))
|
else if (STREQ (name, "sigvechandler"))
|
saved_pc_offset = 120 + 14 * 4;
|
saved_pc_offset = 120 + 14 * 4;
|
}
|
}
|
|
|
if (frame->next)
|
if (frame->next)
|
return read_memory_integer (frame->next->frame + saved_pc_offset, 4);
|
return read_memory_integer (frame->next->frame + saved_pc_offset, 4);
|
return read_memory_integer (read_register (SP_REGNUM) + saved_pc_offset, 4);
|
return read_memory_integer (read_register (SP_REGNUM) + saved_pc_offset, 4);
|
}
|
}
|
#endif /* I386V4_SIGTRAMP_SAVED_PC */
|
#endif /* I386V4_SIGTRAMP_SAVED_PC */
|
|
|
|
|
#ifdef STATIC_TRANSFORM_NAME
|
#ifdef STATIC_TRANSFORM_NAME
|
/* SunPRO encodes the static variables. This is not related to C++ mangling,
|
/* SunPRO encodes the static variables. This is not related to C++ mangling,
|
it is done for C too. */
|
it is done for C too. */
|
|
|
char *
|
char *
|
sunpro_static_transform_name (name)
|
sunpro_static_transform_name (name)
|
char *name;
|
char *name;
|
{
|
{
|
char *p;
|
char *p;
|
if (IS_STATIC_TRANSFORM_NAME (name))
|
if (IS_STATIC_TRANSFORM_NAME (name))
|
{
|
{
|
/* For file-local statics there will be a period, a bunch
|
/* For file-local statics there will be a period, a bunch
|
of junk (the contents of which match a string given in the
|
of junk (the contents of which match a string given in the
|
N_OPT), a period and the name. For function-local statics
|
N_OPT), a period and the name. For function-local statics
|
there will be a bunch of junk (which seems to change the
|
there will be a bunch of junk (which seems to change the
|
second character from 'A' to 'B'), a period, the name of the
|
second character from 'A' to 'B'), a period, the name of the
|
function, and the name. So just skip everything before the
|
function, and the name. So just skip everything before the
|
last period. */
|
last period. */
|
p = strrchr (name, '.');
|
p = strrchr (name, '.');
|
if (p != NULL)
|
if (p != NULL)
|
name = p + 1;
|
name = p + 1;
|
}
|
}
|
return name;
|
return name;
|
}
|
}
|
#endif /* STATIC_TRANSFORM_NAME */
|
#endif /* STATIC_TRANSFORM_NAME */
|
|
|
|
|
|
|
/* Stuff for WIN32 PE style DLL's but is pretty generic really. */
|
/* Stuff for WIN32 PE style DLL's but is pretty generic really. */
|
|
|
CORE_ADDR
|
CORE_ADDR
|
skip_trampoline_code (pc, name)
|
skip_trampoline_code (pc, name)
|
CORE_ADDR pc;
|
CORE_ADDR pc;
|
char *name;
|
char *name;
|
{
|
{
|
if (pc && read_memory_unsigned_integer (pc, 2) == 0x25ff) /* jmp *(dest) */
|
if (pc && read_memory_unsigned_integer (pc, 2) == 0x25ff) /* jmp *(dest) */
|
{
|
{
|
unsigned long indirect = read_memory_unsigned_integer (pc + 2, 4);
|
unsigned long indirect = read_memory_unsigned_integer (pc + 2, 4);
|
struct minimal_symbol *indsym =
|
struct minimal_symbol *indsym =
|
indirect ? lookup_minimal_symbol_by_pc (indirect) : 0;
|
indirect ? lookup_minimal_symbol_by_pc (indirect) : 0;
|
char *symname = indsym ? SYMBOL_NAME (indsym) : 0;
|
char *symname = indsym ? SYMBOL_NAME (indsym) : 0;
|
|
|
if (symname)
|
if (symname)
|
{
|
{
|
if (strncmp (symname, "__imp_", 6) == 0
|
if (strncmp (symname, "__imp_", 6) == 0
|
|| strncmp (symname, "_imp_", 5) == 0)
|
|| strncmp (symname, "_imp_", 5) == 0)
|
return name ? 1 : read_memory_unsigned_integer (indirect, 4);
|
return name ? 1 : read_memory_unsigned_integer (indirect, 4);
|
}
|
}
|
}
|
}
|
return 0; /* not a trampoline */
|
return 0; /* not a trampoline */
|
}
|
}
|
|
|
static int
|
static int
|
gdb_print_insn_i386 (memaddr, info)
|
gdb_print_insn_i386 (memaddr, info)
|
bfd_vma memaddr;
|
bfd_vma memaddr;
|
disassemble_info *info;
|
disassemble_info *info;
|
{
|
{
|
if (disassembly_flavor == att_flavor)
|
if (disassembly_flavor == att_flavor)
|
return print_insn_i386_att (memaddr, info);
|
return print_insn_i386_att (memaddr, info);
|
else if (disassembly_flavor == intel_flavor)
|
else if (disassembly_flavor == intel_flavor)
|
return print_insn_i386_intel (memaddr, info);
|
return print_insn_i386_intel (memaddr, info);
|
/* Never reached - disassembly_flavour is always either att_flavor
|
/* Never reached - disassembly_flavour is always either att_flavor
|
or intel_flavor */
|
or intel_flavor */
|
abort ();
|
abort ();
|
}
|
}
|
|
|
/* If the disassembly mode is intel, we have to also switch the
|
/* If the disassembly mode is intel, we have to also switch the
|
bfd mach_type. This function is run in the set disassembly_flavor
|
bfd mach_type. This function is run in the set disassembly_flavor
|
command, and does that. */
|
command, and does that. */
|
|
|
static void
|
static void
|
set_disassembly_flavor_sfunc (args, from_tty, c)
|
set_disassembly_flavor_sfunc (args, from_tty, c)
|
char *args;
|
char *args;
|
int from_tty;
|
int from_tty;
|
struct cmd_list_element *c;
|
struct cmd_list_element *c;
|
{
|
{
|
set_disassembly_flavor ();
|
set_disassembly_flavor ();
|
}
|
}
|
|
|
static void
|
static void
|
set_disassembly_flavor ()
|
set_disassembly_flavor ()
|
{
|
{
|
if (disassembly_flavor == att_flavor)
|
if (disassembly_flavor == att_flavor)
|
set_architecture_from_arch_mach (bfd_arch_i386, bfd_mach_i386_i386);
|
set_architecture_from_arch_mach (bfd_arch_i386, bfd_mach_i386_i386);
|
else if (disassembly_flavor == intel_flavor)
|
else if (disassembly_flavor == intel_flavor)
|
set_architecture_from_arch_mach (bfd_arch_i386, bfd_mach_i386_i386_intel_syntax);
|
set_architecture_from_arch_mach (bfd_arch_i386, bfd_mach_i386_i386_intel_syntax);
|
}
|
}
|
|
|
|
|
void
|
void
|
_initialize_i386_tdep ()
|
_initialize_i386_tdep ()
|
{
|
{
|
/* Initialize the table saying where each register starts in the
|
/* Initialize the table saying where each register starts in the
|
register file. */
|
register file. */
|
{
|
{
|
int i, offset;
|
int i, offset;
|
|
|
offset = 0;
|
offset = 0;
|
for (i = 0; i < MAX_NUM_REGS; i++)
|
for (i = 0; i < MAX_NUM_REGS; i++)
|
{
|
{
|
i386_register_byte[i] = offset;
|
i386_register_byte[i] = offset;
|
offset += i386_register_raw_size[i];
|
offset += i386_register_raw_size[i];
|
}
|
}
|
}
|
}
|
|
|
/* Initialize the table of virtual register sizes. */
|
/* Initialize the table of virtual register sizes. */
|
{
|
{
|
int i;
|
int i;
|
|
|
for (i = 0; i < MAX_NUM_REGS; i++)
|
for (i = 0; i < MAX_NUM_REGS; i++)
|
i386_register_virtual_size[i] = TYPE_LENGTH (REGISTER_VIRTUAL_TYPE (i));
|
i386_register_virtual_size[i] = TYPE_LENGTH (REGISTER_VIRTUAL_TYPE (i));
|
}
|
}
|
|
|
tm_print_insn = gdb_print_insn_i386;
|
tm_print_insn = gdb_print_insn_i386;
|
tm_print_insn_info.mach = bfd_lookup_arch (bfd_arch_i386, 0)->mach;
|
tm_print_insn_info.mach = bfd_lookup_arch (bfd_arch_i386, 0)->mach;
|
|
|
/* Add the variable that controls the disassembly flavor */
|
/* Add the variable that controls the disassembly flavor */
|
{
|
{
|
struct cmd_list_element *new_cmd;
|
struct cmd_list_element *new_cmd;
|
|
|
new_cmd = add_set_enum_cmd ("disassembly-flavor", no_class,
|
new_cmd = add_set_enum_cmd ("disassembly-flavor", no_class,
|
valid_flavors,
|
valid_flavors,
|
(char *) &disassembly_flavor,
|
(char *) &disassembly_flavor,
|
"Set the disassembly flavor, the valid values are \"att\" and \"intel\", \
|
"Set the disassembly flavor, the valid values are \"att\" and \"intel\", \
|
and the default value is \"att\".",
|
and the default value is \"att\".",
|
&setlist);
|
&setlist);
|
new_cmd->function.sfunc = set_disassembly_flavor_sfunc;
|
new_cmd->function.sfunc = set_disassembly_flavor_sfunc;
|
add_show_from_set (new_cmd, &showlist);
|
add_show_from_set (new_cmd, &showlist);
|
}
|
}
|
|
|
/* Finally, initialize the disassembly flavor to the default given
|
/* Finally, initialize the disassembly flavor to the default given
|
in the disassembly_flavor variable */
|
in the disassembly_flavor variable */
|
|
|
set_disassembly_flavor ();
|
set_disassembly_flavor ();
|
}
|
}
|
|
|
