OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [net/] [README.dgrs] - Diff between revs 199 and 1765

Only display areas with differences | Details | Blame | View Log

Rev 199 Rev 1765
        The Digi Intl. RightSwitch SE-X (dgrs) Device Driver
        The Digi Intl. RightSwitch SE-X (dgrs) Device Driver
This is a Linux driver for the Digi International RightSwitch SE-X
This is a Linux driver for the Digi International RightSwitch SE-X
EISA and PCI boards.  These are 4 (EISA) or 6 (PCI) port ethernet
EISA and PCI boards.  These are 4 (EISA) or 6 (PCI) port ethernet
switches and a NIC combined into a single board.  This driver can
switches and a NIC combined into a single board.  This driver can
be compiled into the kernel statically or as a loadable module.
be compiled into the kernel statically or as a loadable module.
There is also a companion management tool, called "xrightswitch".
There is also a companion management tool, called "xrightswitch".
The management tool lets you watch the performance graphically,
The management tool lets you watch the performance graphically,
as well as set the SNMP agent IP and IPX addresses, IEEE Spanning
as well as set the SNMP agent IP and IPX addresses, IEEE Spanning
Tree, and Aging time.  These can also be set from the command line
Tree, and Aging time.  These can also be set from the command line
when the driver is loaded.  The driver command line options are:
when the driver is loaded.  The driver command line options are:
        debug=NNN               Debug printing level
        debug=NNN               Debug printing level
        dma=0/1                 Disable/Enable DMA on PCI card
        dma=0/1                 Disable/Enable DMA on PCI card
        spantree=0/1            Disable/Enable IEEE spanning tree
        spantree=0/1            Disable/Enable IEEE spanning tree
        hashexpire=NNN          Change address aging time (default 300 seconds)
        hashexpire=NNN          Change address aging time (default 300 seconds)
        ipaddr=A,B,C,D          Set SNMP agent IP address i.e. 199,86,8,221
        ipaddr=A,B,C,D          Set SNMP agent IP address i.e. 199,86,8,221
        iptrap=A,B,C,D          Set SNMP agent IP trap address i.e. 199,86,8,221
        iptrap=A,B,C,D          Set SNMP agent IP trap address i.e. 199,86,8,221
        ipxnet=NNN              Set SNMP agent IPX network number
        ipxnet=NNN              Set SNMP agent IPX network number
        nicmode=0/1             Disable/Enable multiple NIC mode
        nicmode=0/1             Disable/Enable multiple NIC mode
There is also a tool for setting up input and output packet filters
There is also a tool for setting up input and output packet filters
on each port, called "dgrsfilt".
on each port, called "dgrsfilt".
Both the management tool and the filtering tool are available
Both the management tool and the filtering tool are available
separately from the following FTP site:
separately from the following FTP site:
        ftp://ftp.dgii.com/drivers/rightswitch/linux/
        ftp://ftp.dgii.com/drivers/rightswitch/linux/
When nicmode=1, the board and driver operate as 4 or 6 individual
When nicmode=1, the board and driver operate as 4 or 6 individual
NIC ports (eth0...eth5) instead of as a switch.  All switching
NIC ports (eth0...eth5) instead of as a switch.  All switching
functions are disabled.  In the future, the board firmware may include
functions are disabled.  In the future, the board firmware may include
a routing cache when in this mode.
a routing cache when in this mode.
Copyright 1995-1996 Digi International Inc.
Copyright 1995-1996 Digi International Inc.
This software may be used and distributed according to the terms
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
of the GNU General Public License, incorporated herein by reference.
For information on purchasing a RightSwitch SE-4 or SE-6
For information on purchasing a RightSwitch SE-4 or SE-6
board, please contact Digi's sales department at 1-612-912-3444
board, please contact Digi's sales department at 1-612-912-3444
or 1-800-DIGIBRD.  Outside the U.S., please check our Web page at:
or 1-800-DIGIBRD.  Outside the U.S., please check our Web page at:
        http://www.dgii.com
        http://www.dgii.com
for sales offices worldwide.  Tech support is also available through
for sales offices worldwide.  Tech support is also available through
the channels listed on the Web site, although as long as I am
the channels listed on the Web site, although as long as I am
employed on networking products at Digi I will be happy to provide
employed on networking products at Digi I will be happy to provide
any bug fixes that may be needed.
any bug fixes that may be needed.
-Rick Richardson, rick@dgii.com
-Rick Richardson, rick@dgii.com
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.