OpenCores
URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [rc203soc/] [sw/] [uClinux/] [Documentation/] [isdn/] [README.pcbit] - Diff between revs 1625 and 1765

Go to most recent revision | Only display areas with differences | Details | Blame | View Log

Rev 1625 Rev 1765
------------------------------------------------------------------------------
------------------------------------------------------------------------------
 README file for the PCBIT-D Device Driver.
 README file for the PCBIT-D Device Driver.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
The PCBIT is a Euro ISDN adapter manufactured in Portugal by Octal and
The PCBIT is a Euro ISDN adapter manufactured in Portugal by Octal and
developed in cooperation with Portugal Telecom and Inesc.
developed in cooperation with Portugal Telecom and Inesc.
The driver interfaces with the standard kernel isdn facilities
The driver interfaces with the standard kernel isdn facilities
originally developed by Fritz Elfert in the isdn4linux project.
originally developed by Fritz Elfert in the isdn4linux project.
The common versions of the pcbit board require a firmware that is
The common versions of the pcbit board require a firmware that is
distributed (and copyrighted) by the manufacturer. To load this
distributed (and copyrighted) by the manufacturer. To load this
firmware you need "pcbitctl" available on the standard isdn4k-utils
firmware you need "pcbitctl" available on the standard isdn4k-utils
package or in the pcbit package available in:
package or in the pcbit package available in:
ftp://ftp.di.fc.ul.pt/pub/systems/Linux/isdn
ftp://ftp.di.fc.ul.pt/pub/systems/Linux/isdn
Known Limitations:
Known Limitations:
- The board reset proceeding is at the moment incorrect and will only
- The board reset proceeding is at the moment incorrect and will only
allow you to load the firmware after a hard reset.
allow you to load the firmware after a hard reset.
- Only HDLC in B-channels is supported at the moment. There is now
- Only HDLC in B-channels is supported at the moment. There is now
current support to X.25 in B or D channels nor LAPD in B
current support to X.25 in B or D channels nor LAPD in B
channels. The main reason is that this two other protocol modes have,
channels. The main reason is that this two other protocol modes have,
to my knowledge, very little use. If you want to see them implemented
to my knowledge, very little use. If you want to see them implemented
*do* send me a mail.
*do* send me a mail.
- The driver often triggers errors in the board that i and the
- The driver often triggers errors in the board that i and the
manufacturer believe to be caused by bugs in the firmware. The current
manufacturer believe to be caused by bugs in the firmware. The current
version includes several proceedings for error recovery that should
version includes several proceedings for error recovery that should
allow normal operation. Plans for the future include cooperation with
allow normal operation. Plans for the future include cooperation with
the manufacturer in order to solve this problems.
the manufacturer in order to solve this problems.
Information/hints/help can be obtained in the linux isdn
Information/hints/help can be obtained in the linux isdn
mailing list (isdn4linux@hub-wue.franken.de) or directly from me.
mailing list (isdn4linux@hub-wue.franken.de) or directly from me.
regards,
regards,
  Pedro.
  Pedro.
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.