This document describes the usage and errata of the 3Com "Vortex" device
|
This document describes the usage and errata of the 3Com "Vortex" device
|
driver for Linux.
|
driver for Linux.
|
|
|
This driver supports the following hardware:
|
This driver supports the following hardware:
|
3c590, 3c592, 3c595, 3c597
|
3c590, 3c592, 3c595, 3c597
|
|
|
When loaded as a module the following variables may be set:
|
When loaded as a module the following variables may be set:
|
name type description
|
name type description
|
debug int The debug message level, 0 (no messages) to 6 (wordy).
|
debug int The debug message level, 0 (no messages) to 6 (wordy).
|
options int[] The media type override and card operation settings
|
options int[] The media type override and card operation settings
|
(See list below.)
|
(See list below.)
|
|
|
An example of loading the vortex module is
|
An example of loading the vortex module is
|
insmod 3c59x.o debug=1 options=0,,12
|
insmod 3c59x.o debug=1 options=0,,12
|
This sets the debug message level to minimal messages, sets the first card to
|
This sets the debug message level to minimal messages, sets the first card to
|
the 10baseT transceiver, the second to the EEPROM-set transceiver, and the
|
the 10baseT transceiver, the second to the EEPROM-set transceiver, and the
|
third card to operate in full-duplex mode using its 100baseTx transceiver.
|
third card to operate in full-duplex mode using its 100baseTx transceiver.
|
(Note: card ordering is set by the PCI BIOS.)
|
(Note: card ordering is set by the PCI BIOS.)
|
|
|
Possible media type settings
|
Possible media type settings
|
0 10baseT
|
0 10baseT
|
1 10Mbs AUI
|
1 10Mbs AUI
|
2 undefined
|
2 undefined
|
3 10base2 (BNC)
|
3 10base2 (BNC)
|
4 100base-TX
|
4 100base-TX
|
5 100base-FX
|
5 100base-FX
|
6 MII (not yet available)
|
6 MII (not yet available)
|
7
|
7
|
|
|
8 Full-duplex bit
|
8 Full-duplex bit
|
8 10baseT full-duplex
|
8 10baseT full-duplex
|
12 100baseTx full-duplex
|
12 100baseTx full-duplex
|
16 Bus-master enable bit (experimental use only!)
|
16 Bus-master enable bit (experimental use only!)
|
|
|
Details of the device driver implementation are at the top of the source file.
|
Details of the device driver implementation are at the top of the source file.
|
|
|