/* $Id: dma.h,v 1.1 2005-12-20 11:32:11 jcastillo Exp $
|
/* $Id: dma.h,v 1.1 2005-12-20 11:32:11 jcastillo Exp $
|
* include/asm-sparc/dma.h
|
* include/asm-sparc/dma.h
|
*
|
*
|
* Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
|
* Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
|
*/
|
*/
|
|
|
#ifndef _ASM_SPARC_DMA_H
|
#ifndef _ASM_SPARC_DMA_H
|
#define _ASM_SPARC_DMA_H
|
#define _ASM_SPARC_DMA_H
|
|
|
#include <linux/kernel.h>
|
#include <linux/kernel.h>
|
|
|
#include <asm/vac-ops.h> /* for invalidate's, etc. */
|
#include <asm/vac-ops.h> /* for invalidate's, etc. */
|
#include <asm/sbus.h>
|
#include <asm/sbus.h>
|
#include <asm/delay.h>
|
#include <asm/delay.h>
|
#include <asm/oplib.h>
|
#include <asm/oplib.h>
|
|
|
/* These are irrelevant for Sparc DMA, but we leave it in so that
|
/* These are irrelevant for Sparc DMA, but we leave it in so that
|
* things can compile.
|
* things can compile.
|
*/
|
*/
|
#define MAX_DMA_CHANNELS 8
|
#define MAX_DMA_CHANNELS 8
|
#define MAX_DMA_ADDRESS (~0UL)
|
#define MAX_DMA_ADDRESS (~0UL)
|
#define DMA_MODE_READ 1
|
#define DMA_MODE_READ 1
|
#define DMA_MODE_WRITE 2
|
#define DMA_MODE_WRITE 2
|
|
|
/* Useful constants */
|
/* Useful constants */
|
#define SIZE_16MB (16*1024*1024)
|
#define SIZE_16MB (16*1024*1024)
|
#define SIZE_64K (64*1024)
|
#define SIZE_64K (64*1024)
|
|
|
/* Structure to describe the current status of DMA registers on the Sparc */
|
/* Structure to describe the current status of DMA registers on the Sparc */
|
struct sparc_dma_registers {
|
struct sparc_dma_registers {
|
volatile unsigned long cond_reg; /* DMA condition register */
|
volatile unsigned long cond_reg; /* DMA condition register */
|
volatile char * st_addr; /* Start address of this transfer */
|
volatile char * st_addr; /* Start address of this transfer */
|
volatile unsigned long cnt; /* How many bytes to transfer */
|
volatile unsigned long cnt; /* How many bytes to transfer */
|
volatile unsigned long dma_test; /* DMA test register */
|
volatile unsigned long dma_test; /* DMA test register */
|
};
|
};
|
|
|
/* DVMA chip revisions */
|
/* DVMA chip revisions */
|
enum dvma_rev {
|
enum dvma_rev {
|
dvmarev0,
|
dvmarev0,
|
dvmaesc1,
|
dvmaesc1,
|
dvmarev1,
|
dvmarev1,
|
dvmarev2,
|
dvmarev2,
|
dvmarev3,
|
dvmarev3,
|
dvmarevplus
|
dvmarevplus
|
};
|
};
|
|
|
#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
|
#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
|
|
|
/* Linux DMA information structure, filled during probe. */
|
/* Linux DMA information structure, filled during probe. */
|
struct Linux_SBus_DMA {
|
struct Linux_SBus_DMA {
|
struct Linux_SBus_DMA *next;
|
struct Linux_SBus_DMA *next;
|
struct linux_sbus_device *SBus_dev;
|
struct linux_sbus_device *SBus_dev;
|
struct sparc_dma_registers *regs;
|
struct sparc_dma_registers *regs;
|
|
|
/* Status, misc info */
|
/* Status, misc info */
|
int node; /* Prom node for this DMA device */
|
int node; /* Prom node for this DMA device */
|
int running; /* Are we doing DMA now? */
|
int running; /* Are we doing DMA now? */
|
int allocated; /* Are we "owned" by anyone yet? */
|
int allocated; /* Are we "owned" by anyone yet? */
|
|
|
/* Transfer information. */
|
/* Transfer information. */
|
unsigned long addr; /* Start address of current transfer */
|
unsigned long addr; /* Start address of current transfer */
|
int nbytes; /* Size of current transfer */
|
int nbytes; /* Size of current transfer */
|
int realbytes; /* For splitting up large transfers, etc. */
|
int realbytes; /* For splitting up large transfers, etc. */
|
|
|
/* DMA revision */
|
/* DMA revision */
|
enum dvma_rev revision;
|
enum dvma_rev revision;
|
};
|
};
|
|
|
extern struct Linux_SBus_DMA *dma_chain;
|
extern struct Linux_SBus_DMA *dma_chain;
|
|
|
/* Broken hardware... */
|
/* Broken hardware... */
|
#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
|
#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
|
#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
|
#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
|
|
|
/* Main routines in dma.c */
|
/* Main routines in dma.c */
|
extern void dump_dma_regs(struct sparc_dma_registers *);
|
extern void dump_dma_regs(struct sparc_dma_registers *);
|
extern unsigned long dvma_init(struct linux_sbus *, unsigned long);
|
extern unsigned long dvma_init(struct linux_sbus *, unsigned long);
|
|
|
/* Fields in the cond_reg register */
|
/* Fields in the cond_reg register */
|
/* First, the version identification bits */
|
/* First, the version identification bits */
|
#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
|
#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
|
#define DMA_VERS0 0x00000000 /* Sunray DMA version */
|
#define DMA_VERS0 0x00000000 /* Sunray DMA version */
|
#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
|
#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
|
#define DMA_VERS1 0x80000000 /* DMA rev 1 */
|
#define DMA_VERS1 0x80000000 /* DMA rev 1 */
|
#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
|
#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
|
#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
|
#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
|
|
|
#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
|
#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
|
#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
|
#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
|
#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
|
#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
|
#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
|
#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
|
#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
|
#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
|
#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
|
#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
|
#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
|
#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
|
#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
|
#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
|
#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
|
#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
|
#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
|
#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
|
#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
|
#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
|
#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
|
#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
|
#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
|
#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
|
#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
|
#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
|
#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
|
#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
|
#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
|
#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
|
#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
|
#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
|
#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
|
#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
|
#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
|
#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
|
#define DMA_E_BURST8 0x00040000 /* ENET: SBUS r/w burst size */
|
#define DMA_E_BURST8 0x00040000 /* ENET: SBUS r/w burst size */
|
#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
|
#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
|
#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
|
#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
|
#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
|
#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
|
#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
|
#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
|
#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
|
#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
|
#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
|
#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
|
#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
|
#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
|
#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
|
#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
|
#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
|
#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
|
#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
|
#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
|
|
|
/* Values describing the burst-size property from the PROM */
|
/* Values describing the burst-size property from the PROM */
|
#define DMA_BURST1 0x01
|
#define DMA_BURST1 0x01
|
#define DMA_BURST2 0x02
|
#define DMA_BURST2 0x02
|
#define DMA_BURST4 0x04
|
#define DMA_BURST4 0x04
|
#define DMA_BURST8 0x08
|
#define DMA_BURST8 0x08
|
#define DMA_BURST16 0x10
|
#define DMA_BURST16 0x10
|
#define DMA_BURST32 0x20
|
#define DMA_BURST32 0x20
|
#define DMA_BURST64 0x40
|
#define DMA_BURST64 0x40
|
#define DMA_BURSTBITS 0x7f
|
#define DMA_BURSTBITS 0x7f
|
|
|
/* Determine highest possible final transfer address given a base */
|
/* Determine highest possible final transfer address given a base */
|
#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
|
#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
|
|
|
/* Yes, I hack a lot of elisp in my spare time... */
|
/* Yes, I hack a lot of elisp in my spare time... */
|
#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
|
#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
|
#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & DMA_HNDL_INTR))
|
#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & DMA_HNDL_INTR))
|
#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
|
#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
|
#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
|
#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
|
#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
|
#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
|
#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
|
#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
|
#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
|
#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
|
#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
|
#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
|
#define DMA_BEGINDMA_W(regs) \
|
#define DMA_BEGINDMA_W(regs) \
|
((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
|
((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
|
#define DMA_BEGINDMA_R(regs) \
|
#define DMA_BEGINDMA_R(regs) \
|
((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
|
((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
|
|
|
/* For certain DMA chips, we need to disable ints upon irq entry
|
/* For certain DMA chips, we need to disable ints upon irq entry
|
* and turn them back on when we are done. So in any ESP interrupt
|
* and turn them back on when we are done. So in any ESP interrupt
|
* handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
|
* handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
|
* when leaving the handler. You have been warned...
|
* when leaving the handler. You have been warned...
|
*/
|
*/
|
#define DMA_IRQ_ENTRY(dma, dregs) do { \
|
#define DMA_IRQ_ENTRY(dma, dregs) do { \
|
if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
|
if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
|
} while (0)
|
} while (0)
|
|
|
#define DMA_IRQ_EXIT(dma, dregs) do { \
|
#define DMA_IRQ_EXIT(dma, dregs) do { \
|
if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
|
if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
|
} while(0)
|
} while(0)
|
|
|
/* Pause until counter runs out or BIT isn't set in the DMA condition
|
/* Pause until counter runs out or BIT isn't set in the DMA condition
|
* register.
|
* register.
|
*/
|
*/
|
extern inline void sparc_dma_pause(struct sparc_dma_registers *regs,
|
extern inline void sparc_dma_pause(struct sparc_dma_registers *regs,
|
unsigned long bit)
|
unsigned long bit)
|
{
|
{
|
int ctr = 50000; /* Let's find some bugs ;) */
|
int ctr = 50000; /* Let's find some bugs ;) */
|
|
|
/* Busy wait until the bit is not set any more */
|
/* Busy wait until the bit is not set any more */
|
while((regs->cond_reg&bit) && (ctr>0)) {
|
while((regs->cond_reg&bit) && (ctr>0)) {
|
ctr--;
|
ctr--;
|
__delay(5);
|
__delay(5);
|
}
|
}
|
|
|
/* Check for bogus outcome. */
|
/* Check for bogus outcome. */
|
if(!ctr)
|
if(!ctr)
|
panic("DMA timeout");
|
panic("DMA timeout");
|
}
|
}
|
|
|
/* Reset the friggin' thing... */
|
/* Reset the friggin' thing... */
|
#define DMA_RESET(dma) do { \
|
#define DMA_RESET(dma) do { \
|
struct sparc_dma_registers *regs = dma->regs; \
|
struct sparc_dma_registers *regs = dma->regs; \
|
/* Let the current FIFO drain itself */ \
|
/* Let the current FIFO drain itself */ \
|
sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
|
sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
|
/* Reset the logic */ \
|
/* Reset the logic */ \
|
regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \
|
regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \
|
__delay(400); /* let the bits set ;) */ \
|
__delay(400); /* let the bits set ;) */ \
|
regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
|
regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
|
sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
|
sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
|
/* Enable FAST transfers if available */ \
|
/* Enable FAST transfers if available */ \
|
if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \
|
if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \
|
dma->running = 0; \
|
dma->running = 0; \
|
} while(0)
|
} while(0)
|
|
|
#define for_each_dvma(dma) \
|
#define for_each_dvma(dma) \
|
for((dma) = dma_chain; (dma); (dma) = (dma)->next)
|
for((dma) = dma_chain; (dma); (dma) = (dma)->next)
|
|
|
extern int get_dma_list(char *);
|
extern int get_dma_list(char *);
|
extern int request_dma(unsigned int, const char *);
|
extern int request_dma(unsigned int, const char *);
|
extern void free_dma(unsigned int);
|
extern void free_dma(unsigned int);
|
|
|
#endif /* !(_ASM_SPARC_DMA_H) */
|
#endif /* !(_ASM_SPARC_DMA_H) */
|
|
|