/* adv_dbg_commands.c -- JTAG protocol bridge between GDB and Advanced debug module.
|
/* adv_dbg_commands.c -- JTAG protocol bridge between GDB and Advanced debug module.
|
Copyright(C) Nathan Yawn, nyawn@opencores.net
|
Copyright (C) 2008-2010 Nathan Yawn, nyawn@opencores.net
|
|
|
This file contains functions which perform high-level transactions
|
This file contains functions which perform high-level transactions
|
on a JTAG chain and debug unit, such as setting a value in the TAP IR
|
on a JTAG chain and debug unit, such as setting a value in the TAP IR
|
or doing a burst write through the wishbone module of the debug unit.
|
or doing a burst write through the wishbone module of the debug unit.
|
It uses the protocol for the Advanced Debug Interface (adv_dbg_if).
|
It uses the protocol for the Advanced Debug Interface (adv_dbg_if).
|
|
|
This program is free software; you can redistribute it and/or modify
|
This program is free software; you can redistribute it and/or modify
|
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
the Free Software Foundation; either version 2 of the License, or
|
the Free Software Foundation; either version 2 of the License, or
|
(at your option) any later version.
|
(at your option) any later version.
|
|
|
This program is distributed in the hope that it will be useful,
|
This program is distributed in the hope that it will be useful,
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
GNU General Public License for more details.
|
GNU General Public License for more details.
|
|
|
You should have received a copy of the GNU General Public License
|
You should have received a copy of the GNU General Public License
|
along with this program; if not, write to the Free Software
|
along with this program; if not, write to the Free Software
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
*/
|
*/
|
|
|
|
|
|
|
#include <stdio.h>
|
#include <stdio.h>
|
#include <stdlib.h> // for malloc()
|
#include <stdlib.h> // for malloc()
|
#include <unistd.h> // for exit()
|
#include <unistd.h> // for exit()
|
//#include <pthread.h> // for mutexes
|
#include <strings.h> // for bzero()
|
|
|
#include "chain_commands.h"
|
#include "chain_commands.h"
|
#include "adv_dbg_commands.h" // hardware-specific defines for the debug module
|
#include "adv_dbg_commands.h" // hardware-specific defines for the debug module
|
//#include "altera_virtual_jtag.h" // hardware-specifg defines for the Altera Virtual JTAG interface
|
|
#include "cable_common.h" // low-level JTAG IO routines
|
#include "cable_common.h" // low-level JTAG IO routines
|
#include "errcodes.h"
|
#include "errcodes.h"
|
|
|
#define debug(...) //fprintf(stderr, __VA_ARGS__ )
|
#define debug(...) //fprintf(stderr, __VA_ARGS__ )
|
|
|
// How many '0' status bits to get during a burst read
|
// How many '0' status bits to get during a burst read
|
// before giving up
|
// before giving up
|
#define MAX_READ_STATUS_WAIT 100
|
#define MAX_READ_STATUS_WAIT 100
|
|
|
// Currently selected internal register in each module
|
// Currently selected internal register in each module
|
// - cuts down on unnecessary transfers
|
// - cuts down on unnecessary transfers
|
int current_reg_idx[DBG_MAX_MODULES];
|
int current_reg_idx[DBG_MAX_MODULES];
|
|
|
// Prototypes for local functions
|
// Prototypes for local functions
|
uint32_t adbg_compute_crc(uint32_t crc_in, uint32_t data_in, int length_bits);
|
uint32_t adbg_compute_crc(uint32_t crc_in, uint32_t data_in, int length_bits);
|
|
|
|
|
|
|
////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////
|
// Helper functions
|
// Helper functions
|
|
|
uint32_t adbg_compute_crc(uint32_t crc_in, uint32_t data_in, int length_bits)
|
uint32_t adbg_compute_crc(uint32_t crc_in, uint32_t data_in, int length_bits)
|
{
|
{
|
int i;
|
int i;
|
unsigned int d, c;
|
unsigned int d, c;
|
uint32_t crc_out = crc_in;
|
uint32_t crc_out = crc_in;
|
|
|
for(i = 0; i < length_bits; i = i+1)
|
for(i = 0; i < length_bits; i = i+1)
|
{
|
{
|
d = ((data_in >> i) & 0x1) ? 0xffffffff : 0;
|
d = ((data_in >> i) & 0x1) ? 0xffffffff : 0;
|
c = (crc_out & 0x1) ? 0xffffffff : 0;
|
c = (crc_out & 0x1) ? 0xffffffff : 0;
|
crc_out = crc_out >> 1;
|
crc_out = crc_out >> 1;
|
crc_out = crc_out ^ ((d ^ c) & ADBG_CRC_POLY);
|
crc_out = crc_out ^ ((d ^ c) & ADBG_CRC_POLY);
|
}
|
}
|
return crc_out;
|
return crc_out;
|
}
|
}
|
|
|
//////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////
|
// Functions which operate on the advanced debug unit
|
// Functions which operate on the advanced debug unit
|
|
|
/* Selects one of the modules in the debug unit (e.g. wishbone unit, CPU0, etc.)
|
/* Selects one of the modules in the debug unit (e.g. wishbone unit, CPU0, etc.)
|
*/
|
*/
|
int adbg_select_module(int chain)
|
int adbg_select_module(int chain)
|
{
|
{
|
uint32_t data;
|
uint32_t data;
|
int err = APP_ERR_NONE;
|
int err = APP_ERR_NONE;
|
|
|
if (current_chain == chain)
|
if (current_chain == chain)
|
return err;
|
return err;
|
|
|
current_chain = -1;
|
current_chain = -1;
|
desired_chain = chain;
|
desired_chain = chain;
|
|
|
// MSB of the data out must be set to 1, indicating a module select command
|
// MSB of the data out must be set to 1, indicating a module select command
|
data = chain | (1<<DBG_MODULE_SELECT_REG_SIZE);
|
data = chain | (1<<DBG_MODULE_SELECT_REG_SIZE);
|
|
|
debug("select module %i\n", chain);
|
debug("select module %i\n", chain);
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
|
|
/* write data, EXIT1_DR */
|
/* write data, EXIT1_DR */
|
err |= jtag_write_stream(&data, 3, 1); // When TMS is set (last parameter), DR length is also adjusted; EXIT1_DR
|
err |= jtag_write_stream(&data, 3, 1); // When TMS is set (last parameter), DR length is also adjusted; EXIT1_DR
|
|
|
// *** If 'valid module selected' feedback is ever added, test it here
|
// *** If 'valid module selected' feedback is ever added, test it here
|
|
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
|
|
current_chain = chain;
|
current_chain = chain;
|
|
|
if(err)
|
if(err)
|
printf("Error %s selecting active debug module\n", get_err_string(err));
|
printf("Error %s selecting active debug module\n", get_err_string(err));
|
|
|
return err;
|
return err;
|
}
|
}
|
|
|
// Set the index of the desired register in the currently selected module
|
// Set the index of the desired register in the currently selected module
|
// 1 bit module select command
|
// 1 bit module select command
|
// 4 bits opcode
|
// 4 bits opcode
|
// n bits index
|
// n bits index
|
// Make sure the corrent module/chain is selected before calling this
|
// Make sure the corrent module/chain is selected before calling this
|
int adbg_select_ctrl_reg(unsigned long regidx)
|
int adbg_select_ctrl_reg(unsigned long regidx)
|
{
|
{
|
uint32_t data;
|
uint32_t data;
|
int index_len = 0;
|
int index_len = 0;
|
uint32_t opcode;
|
uint32_t opcode;
|
int err = APP_ERR_NONE;
|
int err = APP_ERR_NONE;
|
|
|
if(err |= adbg_select_module(desired_chain))
|
if(err |= adbg_select_module(desired_chain))
|
return err;
|
return err;
|
|
|
debug("selreg %ld\n", regidx);
|
debug("selreg %ld\n", regidx);
|
|
|
// If this reg is already selected, don't do a JTAG transaction
|
// If this reg is already selected, don't do a JTAG transaction
|
if((current_chain >= 0) && (current_reg_idx[current_chain] == regidx))
|
if(current_reg_idx[current_chain] == regidx)
|
return APP_ERR_NONE;
|
return APP_ERR_NONE;
|
|
|
switch(current_chain) {
|
switch(current_chain) {
|
case DC_WISHBONE:
|
case DC_WISHBONE:
|
index_len = DBG_WB_REG_SEL_LEN;
|
index_len = DBG_WB_REG_SEL_LEN;
|
opcode = DBG_WB_CMD_IREG_SEL;
|
opcode = DBG_WB_CMD_IREG_SEL;
|
break;
|
break;
|
case DC_CPU0:
|
case DC_CPU0:
|
index_len = DBG_CPU0_REG_SEL_LEN;
|
index_len = DBG_CPU0_REG_SEL_LEN;
|
opcode = DBG_CPU0_CMD_IREG_SEL;
|
opcode = DBG_CPU0_CMD_IREG_SEL;
|
break;
|
break;
|
case DC_CPU1:
|
case DC_CPU1:
|
index_len = DBG_CPU1_REG_SEL_LEN;
|
index_len = DBG_CPU1_REG_SEL_LEN;
|
opcode = DBG_CPU1_CMD_IREG_SEL;
|
opcode = DBG_CPU1_CMD_IREG_SEL;
|
break;
|
break;
|
default:
|
default:
|
printf("ERROR! Illegal debug chain selected while selecting control register!\n");
|
printf("ERROR! Illegal debug chain selected while selecting control register!\n");
|
return 1;
|
return 1;
|
}
|
}
|
|
|
|
|
// Set up the data.
|
// Set up the data.
|
data = (opcode & ~(1<<DBG_WB_OPCODE_LEN)) << index_len; // MSB must be 0 to access modules
|
data = (opcode & ~(1<<DBG_WB_OPCODE_LEN)) << index_len; // MSB must be 0 to access modules
|
data |= regidx;
|
data |= regidx;
|
|
|
debug("Selreg: data is 0x%lX (opcode = 0x%lX)\n", data,opcode);
|
debug("Selreg: data is 0x%lX (opcode = 0x%lX)\n", data,opcode);
|
|
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
|
|
/* write data, EXIT1_DR */
|
/* write data, EXIT1_DR */
|
err |= jtag_write_stream(&data, 5+index_len, 1);
|
err |= jtag_write_stream(&data, 5+index_len, 1);
|
|
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
|
|
/* reset retry counter */
|
/* reset retry counter */
|
retry_ok();
|
retry_ok();
|
current_reg_idx[current_chain] = regidx;
|
current_reg_idx[current_chain] = regidx;
|
|
|
if(err)
|
if(err)
|
printf("Error %s selecting control register %ld in module %i\n", get_err_string(err), regidx, current_chain);
|
printf("Error %s selecting control register %ld in module %i\n", get_err_string(err), regidx, current_chain);
|
|
|
return err;
|
return err;
|
}
|
}
|
|
|
|
|
/* Sends out a generic command to the selected debug unit module, LSB first. Fields are:
|
/* Sends out a generic command to the selected debug unit module, LSB first. Fields are:
|
* MSB: 1-bit module command
|
* MSB: 1-bit module command
|
* 4-bit opcode
|
* 4-bit opcode
|
* m-bit register index
|
* m-bit register index
|
* n-bit data (LSB)
|
* n-bit data (LSB)
|
* Note that in the data array, the LSB of data[0] will be sent first,
|
* Note that in the data array, the LSB of data[0] will be sent first,
|
* (and become the LSB of the command)
|
* (and become the LSB of the command)
|
* up through the MSB of data[0], then the LSB of data[1], etc.
|
* up through the MSB of data[0], then the LSB of data[1], etc.
|
*/
|
*/
|
int adbg_ctrl_write(unsigned long regidx, uint32_t *cmd_data, int length_bits) {
|
int adbg_ctrl_write(unsigned long regidx, uint32_t *cmd_data, int length_bits) {
|
uint32_t data;
|
uint32_t data;
|
int index_len = 0;
|
int index_len = 0;
|
uint32_t opcode;
|
uint32_t opcode;
|
int err = APP_ERR_NONE;
|
int err = APP_ERR_NONE;
|
|
|
if(err |= adbg_select_module(desired_chain))
|
if(err |= adbg_select_module(desired_chain))
|
return err;
|
return err;
|
|
|
debug("ctrl wr idx %ld dat 0x%lX\n", regidx, cmd_data[0]);
|
debug("ctrl wr idx %ld dat 0x%lX\n", regidx, cmd_data[0]);
|
|
|
switch(current_chain) {
|
switch(current_chain) {
|
case DC_WISHBONE:
|
case DC_WISHBONE:
|
index_len = DBG_WB_REG_SEL_LEN;
|
index_len = DBG_WB_REG_SEL_LEN;
|
opcode = DBG_WB_CMD_IREG_WR;
|
opcode = DBG_WB_CMD_IREG_WR;
|
break;
|
break;
|
case DC_CPU0:
|
case DC_CPU0:
|
index_len = DBG_CPU0_REG_SEL_LEN;
|
index_len = DBG_CPU0_REG_SEL_LEN;
|
opcode = DBG_CPU0_CMD_IREG_WR;
|
opcode = DBG_CPU0_CMD_IREG_WR;
|
break;
|
break;
|
case DC_CPU1:
|
case DC_CPU1:
|
index_len = DBG_CPU1_REG_SEL_LEN;
|
index_len = DBG_CPU1_REG_SEL_LEN;
|
opcode = DBG_CPU1_CMD_IREG_WR;
|
opcode = DBG_CPU1_CMD_IREG_WR;
|
break;
|
break;
|
default:
|
default:
|
printf("ERROR! Illegal debug chain selected (%i) while doing control write!\n", current_chain);
|
printf("ERROR! Illegal debug chain selected (%i) while doing control write!\n", current_chain);
|
return 1;
|
return 1;
|
}
|
}
|
|
|
|
|
// Set up the data. We cheat a bit here, by using 2 stream writes.
|
// Set up the data. We cheat a bit here, by using 2 stream writes.
|
data = (opcode & ~(1<<DBG_WB_OPCODE_LEN)) << index_len; // MSB must be 0 to access modules
|
data = (opcode & ~(1<<DBG_WB_OPCODE_LEN)) << index_len; // MSB must be 0 to access modules
|
data |= regidx;
|
data |= regidx;
|
|
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
|
|
/* write data, EXIT1_DR */
|
/* write data, EXIT1_DR */
|
err |= jtag_write_stream(cmd_data, length_bits, 0);
|
err |= jtag_write_stream(cmd_data, length_bits, 0);
|
err |= jtag_write_stream(&data, 5+index_len, 1);
|
err |= jtag_write_stream(&data, 5+index_len, 1);
|
|
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
|
|
/* reset retry counter */
|
/* reset retry counter */
|
retry_ok();
|
retry_ok();
|
current_reg_idx[current_chain] = regidx;
|
current_reg_idx[current_chain] = regidx;
|
|
|
if(err)
|
if(err)
|
printf("Error %s writing control register %ld in module %i\n", get_err_string(err), regidx, current_chain);
|
printf("Error %s writing control register %ld in module %i\n", get_err_string(err), regidx, current_chain);
|
|
|
return err;
|
return err;
|
}
|
}
|
|
|
|
|
/* reads control register (internal to the debug unit)
|
/* reads control register (internal to the debug unit)
|
* Currently only 1 register in the CPU module, so no register select
|
* Currently only 1 register in the CPU module, so no register select
|
*/
|
*/
|
int adbg_ctrl_read(unsigned long regidx, uint32_t *data, int databits) {
|
int adbg_ctrl_read(unsigned long regidx, uint32_t *data, int databits) {
|
uint32_t outdata[4] = {0,0,0,0}; // *** We assume no more than 128 databits
|
uint32_t outdata[4] = {0,0,0,0}; // *** We assume no more than 128 databits
|
int opcode;
|
int opcode;
|
int opcode_len;
|
int opcode_len;
|
int err = APP_ERR_NONE;
|
int err = APP_ERR_NONE;
|
|
|
if(err |= adbg_select_module(desired_chain))
|
if(err |= adbg_select_module(desired_chain))
|
return err;
|
return err;
|
|
|
if(err |= adbg_select_ctrl_reg(regidx))
|
if(err |= adbg_select_ctrl_reg(regidx))
|
return err;
|
return err;
|
|
|
debug("ctrl rd idx %ld\n", regidx);
|
debug("ctrl rd idx %ld\n", regidx);
|
|
|
// There is no 'read' command, We write a NOP to read
|
// There is no 'read' command, We write a NOP to read
|
switch(current_chain) {
|
switch(current_chain) {
|
case DC_WISHBONE:
|
case DC_WISHBONE:
|
opcode = DBG_WB_CMD_NOP;
|
opcode = DBG_WB_CMD_NOP;
|
opcode_len = DBG_WB_OPCODE_LEN;
|
opcode_len = DBG_WB_OPCODE_LEN;
|
break;
|
break;
|
case DC_CPU0:
|
case DC_CPU0:
|
opcode = DBG_CPU0_CMD_NOP;
|
opcode = DBG_CPU0_CMD_NOP;
|
opcode_len = DBG_CPU0_OPCODE_LEN;
|
opcode_len = DBG_CPU0_OPCODE_LEN;
|
break;
|
break;
|
case DC_CPU1:
|
case DC_CPU1:
|
opcode = DBG_CPU1_CMD_NOP;
|
opcode = DBG_CPU1_CMD_NOP;
|
opcode_len = DBG_CPU1_OPCODE_LEN;
|
opcode_len = DBG_CPU1_OPCODE_LEN;
|
break;
|
break;
|
default:
|
default:
|
printf("ERROR! Illegal debug chain selected while doing control read!\n");
|
printf("ERROR! Illegal debug chain selected while doing control read!\n");
|
return 1;
|
return 1;
|
}
|
}
|
|
|
outdata[0] = opcode & ~(0x1 << opcode_len); // Zero MSB = op for module, not top-level debug unit
|
outdata[0] = opcode & ~(0x1 << opcode_len); // Zero MSB = op for module, not top-level debug unit
|
|
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
|
|
// We cheat a bit here by using two stream operations.
|
// We cheat a bit here by using two stream operations.
|
// First we burn the postfix bits and read the desired data, then we push a NOP
|
// First we burn the postfix bits and read the desired data, then we push a NOP
|
// into position through the prefix bits. We may be able to combine the two and save
|
// into position through the prefix bits. We may be able to combine the two and save
|
// some cycles, but that way leads to madness.
|
// some cycles, but that way leads to madness.
|
err |= jtag_read_write_stream(outdata, data, databits, 1, 0); // adjust for prefix bits
|
err |= jtag_read_write_stream(outdata, data, databits, 1, 0); // adjust for prefix bits
|
err |= jtag_write_stream(outdata, opcode_len+1, 1); // adjust for postfix bits, Set TMS: EXIT1_DR
|
err |= jtag_write_stream(outdata, opcode_len+1, 1); // adjust for postfix bits, Set TMS: EXIT1_DR
|
|
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
|
|
/* reset retry counter */
|
/* reset retry counter */
|
retry_ok();
|
retry_ok();
|
|
|
if(err)
|
if(err)
|
printf("Error %s reading control register %ld in module %i\n", get_err_string(err), regidx, current_chain);
|
printf("Error %s reading control register %ld in module %i\n", get_err_string(err), regidx, current_chain);
|
|
|
return err;
|
return err;
|
}
|
}
|
|
|
|
|
/* sends out a burst command to the selected module in the debug unit (MSB to LSB):
|
/* sends out a burst command to the selected module in the debug unit (MSB to LSB):
|
* 1-bit module command
|
* 1-bit module command
|
* 4-bit opcode
|
* 4-bit opcode
|
* 32-bit address
|
* 32-bit address
|
* 16-bit length (of the burst, in words)
|
* 16-bit length (of the burst, in words)
|
*/
|
*/
|
int adbg_burst_command(unsigned int opcode, unsigned long address, int length_words) {
|
int adbg_burst_command(unsigned int opcode, unsigned long address, int length_words) {
|
uint32_t data[2];
|
uint32_t data[2];
|
int err = APP_ERR_NONE;
|
int err = APP_ERR_NONE;
|
|
|
if(err |= adbg_select_module(desired_chain))
|
if(err |= adbg_select_module(desired_chain))
|
return err;
|
return err;
|
|
|
debug("burst op %i adr 0x%lX len %i\n", opcode, address, length_words);
|
debug("burst op %i adr 0x%lX len %i\n", opcode, address, length_words);
|
|
|
// Set up the data
|
// Set up the data
|
data[0] = length_words | (address << 16);
|
data[0] = length_words | (address << 16);
|
data[1] = ((address >> 16) | ((opcode & 0xf) << 16)) & ~(0x1<<20); // MSB must be 0 to access modules
|
data[1] = ((address >> 16) | ((opcode & 0xf) << 16)) & ~(0x1<<20); // MSB must be 0 to access modules
|
|
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
err |= tap_set_shift_dr(); /* SHIFT_DR */
|
|
|
/* write data, EXIT1_DR */
|
/* write data, EXIT1_DR */
|
err |= jtag_write_stream(data, 53, 1); // When TMS is set (last parameter), DR length is also adjusted; EXIT1_DR
|
err |= jtag_write_stream(data, 53, 1); // When TMS is set (last parameter), DR length is also adjusted; EXIT1_DR
|
|
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
|
|
/* reset retry counter */
|
/* reset retry counter */
|
retry_ok();
|
retry_ok();
|
|
|
if(err)
|
if(err)
|
printf("Error %s sending burst command to module %i\n", get_err_string(err), desired_chain);
|
printf("Error %s sending burst command to module %i\n", get_err_string(err), desired_chain);
|
|
|
return err;
|
return err;
|
}
|
}
|
|
|
// Set up and execute a burst read from a contiguous block of addresses.
|
// Set up and execute a burst read from a contiguous block of addresses.
|
// Note that there is a minor weakness in the CRC algorithm in case of retries:
|
// Note that there is a minor weakness in the CRC algorithm in case of retries:
|
// the CRC is only checked for the final burst read. Thus, if errors/partial retries
|
// the CRC is only checked for the final burst read. Thus, if errors/partial retries
|
// break up a transfer into multiple bursts, only the last burst will be CRC protected.
|
// break up a transfer into multiple bursts, only the last burst will be CRC protected.
|
#define MAX_BUS_ERRORS 10
|
#define MAX_BUS_ERRORS 10
|
int adbg_wb_burst_read(int word_size_bytes, int word_count, unsigned long start_address, void *data)
|
int adbg_wb_burst_read(int word_size_bytes, int word_count, unsigned long start_address, void *data)
|
{
|
{
|
unsigned char opcode;
|
unsigned char opcode;
|
uint8_t status;
|
uint8_t status;
|
unsigned long instream;
|
unsigned long instream;
|
int i, j;
|
int i, j;
|
uint32_t crc_calc;
|
uint32_t crc_calc;
|
uint32_t crc_read;
|
uint32_t crc_read;
|
unsigned char word_size_bits;
|
unsigned char word_size_bits;
|
uint32_t out_data = 0;
|
uint32_t out_data = 0;
|
uint32_t in_data;
|
uint32_t in_data;
|
unsigned long addr;
|
unsigned long addr;
|
uint32_t err_data[2];
|
uint32_t err_data[2];
|
int bus_error_retries = 0;
|
int bus_error_retries = 0;
|
int err = APP_ERR_NONE;
|
int err = APP_ERR_NONE;
|
|
static char *output_scratchpad = NULL;
|
|
static int output_scratchpad_size = 0;
|
|
|
debug("Doing burst read, word size %d, word count %d, start address 0x%lX", word_size_bytes, word_count, start_address);
|
debug("Doing burst read, word size %d, word count %d, start address 0x%lX", word_size_bytes, word_count, start_address);
|
|
|
if(word_count <= 0) {
|
if(word_count <= 0) {
|
debug("Ignoring illegal read burst length (%d)\n", word_count);
|
debug("Ignoring illegal read burst length (%d)\n", word_count);
|
return 0;
|
return 0;
|
}
|
}
|
|
|
instream = 0;
|
instream = 0;
|
word_size_bits = word_size_bytes << 3;
|
word_size_bits = word_size_bytes << 3;
|
|
|
// Select the appropriate opcode
|
// Select the appropriate opcode
|
switch(current_chain) {
|
switch(current_chain) {
|
case DC_WISHBONE:
|
case DC_WISHBONE:
|
if (word_size_bytes == 1) opcode = DBG_WB_CMD_BREAD8;
|
if (word_size_bytes == 1) opcode = DBG_WB_CMD_BREAD8;
|
else if(word_size_bytes == 2) opcode = DBG_WB_CMD_BREAD16;
|
else if(word_size_bytes == 2) opcode = DBG_WB_CMD_BREAD16;
|
else if(word_size_bytes == 4) opcode = DBG_WB_CMD_BREAD32;
|
else if(word_size_bytes == 4) opcode = DBG_WB_CMD_BREAD32;
|
else {
|
else {
|
printf("Tried burst read with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
printf("Tried burst read with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
opcode = DBG_WB_CMD_BREAD32;
|
opcode = DBG_WB_CMD_BREAD32;
|
}
|
}
|
break;
|
break;
|
case DC_CPU0:
|
case DC_CPU0:
|
if(word_size_bytes == 4) opcode = DBG_CPU0_CMD_BREAD32;
|
if(word_size_bytes == 4) opcode = DBG_CPU0_CMD_BREAD32;
|
else {
|
else {
|
printf("Tried burst read with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
printf("Tried burst read with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
opcode = DBG_CPU0_CMD_BREAD32;
|
opcode = DBG_CPU0_CMD_BREAD32;
|
}
|
}
|
break;
|
break;
|
case DC_CPU1:
|
case DC_CPU1:
|
if(word_size_bytes == 4) opcode = DBG_CPU1_CMD_BREAD32;
|
if(word_size_bytes == 4) opcode = DBG_CPU1_CMD_BREAD32;
|
else {
|
else {
|
printf("Tried burst read with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
printf("Tried burst read with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
opcode = DBG_CPU0_CMD_BREAD32;
|
opcode = DBG_CPU0_CMD_BREAD32;
|
}
|
}
|
break;
|
break;
|
default:
|
default:
|
printf("ERROR! Illegal debug chain selected while doing burst read!\n");
|
printf("ERROR! Illegal debug chain selected while doing burst read!\n");
|
return 1;
|
return 1;
|
}
|
}
|
|
|
wb_burst_read_retry_full:
|
wb_burst_read_retry_full:
|
i = 0;
|
i = 0;
|
addr = start_address;
|
addr = start_address;
|
wb_burst_read_retry_partial:
|
wb_burst_read_retry_partial:
|
crc_calc = 0xffffffff;
|
crc_calc = 0xffffffff;
|
|
|
|
|
// Send the BURST READ command, returns TAP to idle state
|
// Send the BURST READ command, returns TAP to idle state
|
if(err |= adbg_burst_command(opcode, addr, (word_count-i))) // word_count-i in case of partial retry
|
if(err |= adbg_burst_command(opcode, addr, (word_count-i))) // word_count-i in case of partial retry
|
return err;
|
return err;
|
|
|
// This is a kludge to word around oddities in the Xilinx BSCAN_* devices, and the
|
// This is a kludge to work around oddities in the Xilinx BSCAN_* devices, and the
|
// adv_dbg_if state machine. The debug FSM needs 1 TCK between UPDATE_DR above, and
|
// adv_dbg_if state machine. The debug FSM needs 1 TCK between UPDATE_DR above, and
|
// the CAPTURE_DR below, and the BSCAN_* won't provide it. So, we force it, by putting the TAP
|
// the CAPTURE_DR below, and the BSCAN_* won't provide it. So, we force it, by putting the TAP
|
// in BYPASS, which makes the debug_select line inactive, which is AND'ed with the TCK line (in the xilinx_internal_jtag module),
|
// in BYPASS, which makes the debug_select line inactive, which is AND'ed with the TCK line (in the xilinx_internal_jtag module),
|
// which forces it low. Then we re-enable USER1/debug_select to make TCK high. One TCK
|
// which forces it low. Then we re-enable USER1/debug_select to make TCK high. One TCK
|
// event, the hard way.
|
// event, the hard way.
|
if(global_xilinx_bscan) {
|
if(global_xilinx_bscan) {
|
err |= tap_set_ir(0xFFFFFFFF);
|
err |= tap_set_ir(0xFFFFFFFF);
|
err |= tap_enable_debug_module();
|
err |= tap_enable_debug_module();
|
}
|
}
|
|
|
// Get us back to shift_dr mode to read a burst
|
// Get us back to shift_dr mode to read a burst
|
err |= tap_set_shift_dr();
|
err |= tap_set_shift_dr();
|
|
|
// We do not adjust for the DR length here. BYPASS regs are loaded with 0,
|
// We do not adjust for the DR length here. BYPASS regs are loaded with 0,
|
// and the debug unit waits for a '1' status bit before beginning to read data.
|
// and the debug unit waits for a '1' status bit before beginning to read data.
|
|
|
|
#ifdef ADBG_OPT_HISPEED
|
|
// Get 1 status bit, then word_size_bytes*8 bits
|
|
status = 0;
|
|
j = 0;
|
|
while(!status) { // Status indicates whether there is a word available to read. Wait until it returns true.
|
|
err |= jtag_read_write_bit(0, &status);
|
|
j++;
|
|
// If max count exceeded, retry
|
|
if(j > MAX_READ_STATUS_WAIT) {
|
|
printf("Burst read timed out.\n");
|
|
if(!retry_do()) {
|
|
printf("Retry count exceeded in burst read!\n");
|
|
return err|APP_ERR_MAX_RETRY;
|
|
}
|
|
err = APP_ERR_NONE; // on retry, errors cleared
|
|
goto wb_burst_read_retry_full;
|
|
}
|
|
}
|
|
|
|
// Check we have enough space for the (zero) output data
|
|
if(output_scratchpad_size < (word_count*word_size_bytes))
|
|
{
|
|
free(output_scratchpad);
|
|
output_scratchpad = (char *) malloc(word_count*word_size_bytes);
|
|
if(output_scratchpad != NULL) {
|
|
output_scratchpad_size = (word_count*word_size_bytes);
|
|
bzero(output_scratchpad, output_scratchpad_size);
|
|
}
|
|
else {
|
|
output_scratchpad_size = 0;
|
|
return APP_ERR_MALLOC;
|
|
}
|
|
}
|
|
//uint32_t outstream[64];
|
|
//bzero((char *)outstream, 64*4);
|
|
|
|
// Get the data in one shot
|
|
err |= jtag_read_write_stream((uint32_t *)output_scratchpad, (uint32_t *)data, word_size_bits*word_count, 0, 0);
|
|
for(i = 0; i < (word_count*word_size_bytes); i++)
|
|
{
|
|
crc_calc = adbg_compute_crc(crc_calc, ((uint8_t *)data)[i], 8);
|
|
}
|
|
#else
|
|
|
// Repeat for each word: wait until ready = 1, then read word_size_bits bits.
|
// Repeat for each word: wait until ready = 1, then read word_size_bits bits.
|
for(; i < word_count; i++)
|
for(; i < word_count; i++)
|
{
|
{
|
// Get 1 status bit, then word_size_bytes*8 bits
|
// Get 1 status bit, then word_size_bytes*8 bits
|
status = 0;
|
status = 0;
|
j = 0;
|
j = 0;
|
while(!status) { // Status indicates whether there is a word available to read. Wait until it returns true.
|
while(!status) { // Status indicates whether there is a word available to read. Wait until it returns true.
|
err |= jtag_read_write_bit(0, &status);
|
err |= jtag_read_write_bit(0, &status);
|
j++;
|
j++;
|
// If max count exceeded, retry starting with the failure address
|
// If max count exceeded, retry starting with the failure address
|
if(j > MAX_READ_STATUS_WAIT) {
|
if(j > MAX_READ_STATUS_WAIT) {
|
printf("Burst read timed out.\n");
|
printf("Burst read timed out.\n");
|
if(!retry_do()) {
|
if(!retry_do()) {
|
printf("Retry count exceeded in burst read!\n");
|
printf("Retry count exceeded in burst read!\n");
|
return err|APP_ERR_MAX_RETRY;
|
return err|APP_ERR_MAX_RETRY;
|
}
|
}
|
err = APP_ERR_NONE; // on retry, errors cleared
|
err = APP_ERR_NONE; // on retry, errors cleared
|
addr = start_address + (i*word_size_bytes);
|
addr = start_address + (i*word_size_bytes);
|
goto wb_burst_read_retry_partial;
|
goto wb_burst_read_retry_partial;
|
}
|
}
|
}
|
}
|
|
|
if(j > 1) { // It's actually normal for the first read of a burst to take 2 tries, even with a fast WB clock - 3 with a Xilinx BSCAN
|
if(j > 1) { // It's actually normal for the first read of a burst to take 2 tries, even with a fast WB clock - 3 with a Xilinx BSCAN
|
debug("Took %0d tries before good status bit during burst read", j);
|
debug("Took %0d tries before good status bit during burst read", j);
|
}
|
}
|
|
|
// Get one word of data
|
// Get one word of data
|
err |= jtag_read_write_stream(&out_data, &in_data, word_size_bits, 0, 0);
|
err |= jtag_read_write_stream(&out_data, &in_data, word_size_bits, 0, 0);
|
debug("Read 0x%0lx", in_data);
|
debug("Read 0x%0lx", in_data);
|
|
|
if(err) { // Break and retry as soon as possible on error
|
if(err) { // Break and retry as soon as possible on error
|
printf("Error %s during burst read.\n", get_err_string(err));
|
printf("Error %s during burst read.\n", get_err_string(err));
|
if(!retry_do()) {
|
if(!retry_do()) {
|
printf("Retry count exceeded in burst read!\n");
|
printf("Retry count exceeded in burst read!\n");
|
return err|APP_ERR_MAX_RETRY;
|
return err|APP_ERR_MAX_RETRY;
|
}
|
}
|
err = APP_ERR_NONE; // on retry, errors cleared
|
err = APP_ERR_NONE; // on retry, errors cleared
|
addr = start_address + (i*word_size_bytes);
|
addr = start_address + (i*word_size_bytes);
|
goto wb_burst_read_retry_partial;
|
goto wb_burst_read_retry_partial;
|
}
|
}
|
|
|
crc_calc = adbg_compute_crc(crc_calc, in_data, word_size_bits);
|
crc_calc = adbg_compute_crc(crc_calc, in_data, word_size_bits);
|
|
|
if(word_size_bytes == 1) ((unsigned char *)data)[i] = in_data & 0xFF;
|
if(word_size_bytes == 1) ((unsigned char *)data)[i] = in_data & 0xFF;
|
else if(word_size_bytes == 2) ((unsigned short *)data)[i] = in_data & 0xFFFF;
|
else if(word_size_bytes == 2) ((unsigned short *)data)[i] = in_data & 0xFFFF;
|
else ((unsigned long *)data)[i] = in_data;
|
else ((unsigned long *)data)[i] = in_data;
|
}
|
}
|
|
#endif
|
|
|
// All bus data was read. Read the data CRC from the debug module.
|
// All bus data was read. Read the data CRC from the debug module.
|
err |= jtag_read_write_stream(&out_data, &crc_read, 32, 0, 1);
|
err |= jtag_read_write_stream(&out_data, &crc_read, 32, 0, 1);
|
|
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
|
|
if(crc_calc != crc_read) {
|
if(crc_calc != crc_read) {
|
printf("CRC ERROR! Computed 0x%x, read CRC 0x%x\n", crc_calc, crc_read);
|
printf("CRC ERROR! Computed 0x%x, read CRC 0x%x\n", crc_calc, crc_read);
|
if(!retry_do()) {
|
if(!retry_do()) {
|
printf("Retry count exceeded! Abort!\n\n");
|
printf("Retry count exceeded! Abort!\n\n");
|
return err|APP_ERR_CRC;
|
return err|APP_ERR_CRC;
|
}
|
}
|
goto wb_burst_read_retry_full;
|
goto wb_burst_read_retry_full;
|
}
|
}
|
else debug("CRC OK!");
|
else debug("CRC OK!");
|
|
|
|
|
|
|
// Now, read the error register, and retry/recompute as necessary.
|
// Now, read the error register, and retry/recompute as necessary.
|
if(current_chain == DC_WISHBONE)
|
if(current_chain == DC_WISHBONE)
|
{
|
{
|
err |= adbg_ctrl_read(DBG_WB_REG_ERROR, err_data, 1); // First, just get 1 bit...read address only if necessary,
|
err |= adbg_ctrl_read(DBG_WB_REG_ERROR, err_data, 1); // First, just get 1 bit...read address only if necessary,
|
if(err_data[0] & 0x1) { // Then we have a problem.
|
if(err_data[0] & 0x1) { // Then we have a problem.
|
err |= adbg_ctrl_read(DBG_WB_REG_ERROR, err_data, 33);
|
err |= adbg_ctrl_read(DBG_WB_REG_ERROR, err_data, 33);
|
addr = (err_data[0] >> 1) | (err_data[1] << 31);
|
addr = (err_data[0] >> 1) | (err_data[1] << 31);
|
i = (addr - start_address) / word_size_bytes;
|
i = (addr - start_address) / word_size_bytes;
|
printf("ERROR! WB bus error during burst read, address 0x%lX (index 0x%X), retrying!\n", addr, i);
|
printf("ERROR! WB bus error during burst read, address 0x%lX (index 0x%X), retrying!\n", addr, i);
|
bus_error_retries++;
|
bus_error_retries++;
|
if(bus_error_retries > MAX_BUS_ERRORS) {
|
if(bus_error_retries > MAX_BUS_ERRORS) {
|
printf("Max WB bus errors reached during burst read\n");
|
printf("Max WB bus errors reached during burst read\n");
|
return err|APP_ERR_MAX_BUS_ERR;
|
return err|APP_ERR_MAX_BUS_ERR;
|
}
|
}
|
// Don't call retry_do(), a JTAG reset won't help a WB bus error
|
// Don't call retry_do(), a JTAG reset won't help a WB bus error
|
err_data[0] = 1;
|
err_data[0] = 1;
|
err |= adbg_ctrl_write(DBG_WB_REG_ERROR, err_data, 1); // Write 1 bit, to reset the error register,
|
err |= adbg_ctrl_write(DBG_WB_REG_ERROR, err_data, 1); // Write 1 bit, to reset the error register,
|
goto wb_burst_read_retry_partial;
|
goto wb_burst_read_retry_partial;
|
}
|
}
|
}
|
}
|
|
|
retry_ok();
|
retry_ok();
|
return err;
|
return err;
|
}
|
}
|
|
|
// Set up and execute a burst write to a contiguous set of addresses
|
// Set up and execute a burst write to a contiguous set of addresses
|
int adbg_wb_burst_write(void *data, int word_size_bytes, int word_count, unsigned long start_address)
|
int adbg_wb_burst_write(void *data, int word_size_bytes, int word_count, unsigned long start_address)
|
{
|
{
|
unsigned char opcode;
|
unsigned char opcode;
|
uint8_t status;
|
|
uint32_t datawords[2] = {0,0};
|
uint32_t datawords[2] = {0,0};
|
uint32_t statuswords[2] = {0,0};
|
|
int i;
|
int i;
|
uint32_t crc_calc;
|
uint32_t crc_calc;
|
uint32_t crc_match;
|
uint32_t crc_match;
|
unsigned int word_size_bits;
|
unsigned int word_size_bits;
|
unsigned long addr;
|
unsigned long addr;
|
int bus_error_retries = 0;
|
int bus_error_retries = 0;
|
uint32_t err_data[2];
|
uint32_t err_data[2];
|
int loopct, successes;
|
int loopct, successes;
|
int first_status_loop;
|
#ifndef ADBG_OPT_HISPEED
|
|
uint8_t status;
|
|
uint32_t statuswords[2] = {0,0};
|
|
int first_status_loop = 1;
|
|
#endif
|
int err = APP_ERR_NONE;
|
int err = APP_ERR_NONE;
|
|
|
debug("Doing burst write, word size %d, word count %d, start address 0x%lx", word_size_bytes, word_count, start_address);
|
debug("Doing burst write, word size %d, word count %d, start address 0x%lx\n", word_size_bytes, word_count, start_address);
|
word_size_bits = word_size_bytes << 3;
|
word_size_bits = word_size_bytes << 3;
|
|
|
if(word_count <= 0) {
|
if(word_count <= 0) {
|
printf("Ignoring illegal burst write size (%d)\n", word_count);
|
printf("Ignoring illegal burst write size (%d)\n", word_count);
|
return 0;
|
return 0;
|
}
|
}
|
|
|
// Select the appropriate opcode
|
// Select the appropriate opcode
|
switch(current_chain) {
|
switch(current_chain) {
|
case DC_WISHBONE:
|
case DC_WISHBONE:
|
if (word_size_bytes == 1) opcode = DBG_WB_CMD_BWRITE8;
|
if (word_size_bytes == 1) opcode = DBG_WB_CMD_BWRITE8;
|
else if(word_size_bytes == 2) opcode = DBG_WB_CMD_BWRITE16;
|
else if(word_size_bytes == 2) opcode = DBG_WB_CMD_BWRITE16;
|
else if(word_size_bytes == 4) opcode = DBG_WB_CMD_BWRITE32;
|
else if(word_size_bytes == 4) opcode = DBG_WB_CMD_BWRITE32;
|
else {
|
else {
|
printf("Tried WB burst write with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
printf("Tried WB burst write with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
opcode = DBG_WB_CMD_BWRITE32;
|
opcode = DBG_WB_CMD_BWRITE32;
|
}
|
}
|
break;
|
break;
|
case DC_CPU0:
|
case DC_CPU0:
|
if(word_size_bytes == 4) opcode = DBG_CPU0_CMD_BWRITE32;
|
if(word_size_bytes == 4) opcode = DBG_CPU0_CMD_BWRITE32;
|
else {
|
else {
|
printf("Tried CPU0 burst write with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
printf("Tried CPU0 burst write with invalid word size (%0x), defaulting to 4-byte words", word_size_bytes);
|
opcode = DBG_CPU0_CMD_BWRITE32;
|
opcode = DBG_CPU0_CMD_BWRITE32;
|
}
|
}
|
break;
|
break;
|
case DC_CPU1:
|
case DC_CPU1:
|
if(word_size_bytes == 4) opcode = DBG_CPU1_CMD_BWRITE32;
|
if(word_size_bytes == 4) opcode = DBG_CPU1_CMD_BWRITE32;
|
else {
|
else {
|
printf("Tried CPU1 burst write with invalid word size (%0X), defaulting to 4-byte words", word_size_bytes);
|
printf("Tried CPU1 burst write with invalid word size (%0X), defaulting to 4-byte words", word_size_bytes);
|
opcode = DBG_CPU0_CMD_BWRITE32;
|
opcode = DBG_CPU0_CMD_BWRITE32;
|
}
|
}
|
break;
|
break;
|
default:
|
default:
|
printf("ERROR! Illegal debug chain selected while doing burst WRITE!\n");
|
printf("ERROR! Illegal debug chain selected while doing burst WRITE!\n");
|
return 1;
|
return 1;
|
}
|
}
|
|
|
|
#ifndef ADBG_OPT_HISPEED
|
// Compute which loop iteration in which to expect the first status bit
|
// Compute which loop iteration in which to expect the first status bit
|
first_status_loop = 1 + ((global_DR_prefix_bits + global_DR_postfix_bits)/(word_size_bits+1));
|
first_status_loop = 1 + ((global_DR_prefix_bits + global_DR_postfix_bits)/(word_size_bits+1));
|
|
#endif
|
|
|
wb_burst_write_retry_full:
|
wb_burst_write_retry_full:
|
i = 0;
|
i = 0;
|
addr = start_address;
|
addr = start_address;
|
wb_burst_write_retry_partial:
|
wb_burst_write_retry_partial:
|
crc_calc = 0xffffffff;
|
crc_calc = 0xffffffff;
|
successes = 0;
|
successes = 0;
|
|
|
|
|
// Send burst command, return to idle state
|
// Send burst command, return to idle state
|
if(err |= adbg_burst_command(opcode, addr, (word_count-i))) // word_count-i in case of partial retry
|
if(err |= adbg_burst_command(opcode, addr, (word_count-i))) // word_count-i in case of partial retry
|
return err;
|
return err;
|
|
|
// Get us back to shift_dr mode to write a burst
|
// Get us back to shift_dr mode to write a burst
|
//err |= jtag_write_bit(TMS); // select_dr_scan
|
|
//err |= jtag_write_bit(0); // capture_ir
|
|
//err |= jtag_write_bit(0); // shift_ir
|
|
err |= tap_set_shift_dr();
|
err |= tap_set_shift_dr();
|
|
|
// Write a start bit (a 1) so it knows when to start counting
|
// Write a start bit (a 1) so it knows when to start counting
|
err |= jtag_write_bit(TDO);
|
err |= jtag_write_bit(TDO);
|
|
|
|
#ifdef ADBG_OPT_HISPEED
|
|
// If compiled for "hi-speed" mode, we don't read a status bit after every
|
|
// word written. This saves a lot of complication!
|
|
// In this case, the loop below is used only for CRC calculation.
|
|
err |= jtag_write_stream((uint32_t *) data, (word_count*word_size_bits), 0); // Write data
|
|
#endif
|
|
|
// Now, repeat...
|
// Now, repeat...
|
for(loopct = 0; i < word_count; i++,loopct++) // loopct only used to check status...
|
for(loopct = 0; i < word_count; i++,loopct++) // loopct only used to check status...
|
{
|
{
|
// Write word_size_bytes*8 bits, then get 1 status bit
|
// Write word_size_bytes*8 bits, then get 1 status bit
|
if(word_size_bytes == 4) datawords[0] = ((unsigned long *)data)[i];
|
if(word_size_bytes == 4) datawords[0] = ((unsigned long *)data)[i];
|
else if(word_size_bytes == 2) datawords[0] = ((unsigned short *)data)[i];
|
else if(word_size_bytes == 2) datawords[0] = ((unsigned short *)data)[i];
|
else datawords[0] = ((unsigned char *)data)[i];
|
else datawords[0] = ((unsigned char *)data)[i];
|
|
|
crc_calc = adbg_compute_crc(crc_calc, datawords[0], word_size_bits);
|
crc_calc = adbg_compute_crc(crc_calc, datawords[0], word_size_bits);
|
|
|
|
#ifndef ADBG_OPT_HISPEED
|
// This is an optimization
|
// This is an optimization
|
if((global_DR_prefix_bits + global_DR_postfix_bits) == 0) {
|
if((global_DR_prefix_bits + global_DR_postfix_bits) == 0) {
|
|
//#endif
|
err |= jtag_write_stream(datawords, word_size_bits, 0); // Write data
|
err |= jtag_write_stream(datawords, word_size_bits, 0); // Write data
|
|
//#ifndef ADBG_OPT_HISPEED
|
err |= jtag_read_write_bit(0, &status); // Read status bit
|
err |= jtag_read_write_bit(0, &status); // Read status bit
|
if(!status) {
|
if(!status) {
|
addr = start_address + (i*word_size_bytes);
|
addr = start_address + (i*word_size_bytes);
|
printf("Write before bus ready, retrying (idx %i, addr 0x%08lX).\n", i, addr);
|
printf("Write before bus ready, retrying (idx %i, addr 0x%08lX).\n", i, addr);
|
if(!retry_do()) { printf("Retry count exceeded! Abort!\n\n"); exit(1);}
|
if(!retry_do()) { printf("Retry count exceeded! Abort!\n\n"); exit(1);}
|
// Don't bother going to TAP idle state, we're about to reset the TAP
|
// Don't bother going to TAP idle state, we're about to reset the TAP
|
goto wb_burst_write_retry_partial;
|
goto wb_burst_write_retry_partial;
|
}
|
}
|
}
|
}
|
else { // This is slower (for a USB cable anyway), because a read takes 1 more USB transaction than a write.
|
else { // This is slower (for a USB cable anyway), because a read takes 1 more USB transaction than a write.
|
err |= jtag_read_write_stream(datawords, statuswords, word_size_bits+1, 0, 0);
|
err |= jtag_read_write_stream(datawords, statuswords, word_size_bits+1, 0, 0);
|
debug("St. 0x%08lX 0x%08lX\n", statuswords[0], statuswords[1]);
|
debug("St. 0x%08lX 0x%08lX\n", statuswords[0], statuswords[1]);
|
status = (statuswords[0] || statuswords[1]);
|
status = (statuswords[0] || statuswords[1]);
|
if(loopct > first_status_loop) {
|
if(loopct > first_status_loop) {
|
if(status) successes++;
|
if(status) successes++;
|
else {
|
else {
|
i = successes;
|
i = successes;
|
addr = start_address + (i*word_size_bytes);
|
addr = start_address + (i*word_size_bytes);
|
printf("Write before bus ready, retrying (idx %i, addr 0x%08lX).\n", i, addr);
|
printf("Write before bus ready, retrying (idx %i, addr 0x%08lX).\n", i, addr);
|
if(!retry_do()) { printf("Retry count exceeded! Abort!\n\n"); exit(1);}
|
if(!retry_do()) { printf("Retry count exceeded! Abort!\n\n"); exit(1);}
|
// Don't bother going to TAP idle state, we're about to reset the TAP
|
// Don't bother going to TAP idle state, we're about to reset the TAP
|
goto wb_burst_write_retry_partial;
|
goto wb_burst_write_retry_partial;
|
}
|
}
|
}
|
}
|
}
|
}
|
|
#endif
|
|
|
if(err) {
|
if(err) {
|
printf("Error %s getting status bit, retrying.\n", get_err_string(err));
|
printf("Error %s during burst write, retrying.\n", get_err_string(err));
|
if(!retry_do()) {
|
if(!retry_do()) {
|
printf("Retry count exceeded!\n");
|
printf("Retry count exceeded!\n");
|
return err|APP_ERR_MAX_RETRY;
|
return err|APP_ERR_MAX_RETRY;
|
}
|
}
|
err = APP_ERR_NONE;
|
err = APP_ERR_NONE;
|
addr = start_address + (i*word_size_bytes);
|
addr = start_address + (i*word_size_bytes);
|
// Don't bother going to TAP idle state, we're about to reset the TAP
|
// Don't bother going to TAP idle state, we're about to reset the TAP
|
goto wb_burst_write_retry_partial;
|
goto wb_burst_write_retry_partial;
|
}
|
}
|
|
|
debug("Wrote 0x%0lx", datawords[0]);
|
debug("Wrote 0x%0lx", datawords[0]);
|
}
|
}
|
|
|
// *** If this is a multi-device chain, at least one status bit will be lost.
|
// *** If this is a multi-device chain (and we're not in hi-speed mode), at least one status bit will be lost.
|
// *** If we want to check for it, we'd have to look while sending the CRC, and
|
// *** If we want to check for it, we'd have to look while sending the CRC, and
|
// *** maybe while burning bits to get the match bit. So, for now, there is a
|
// *** maybe while burning bits to get the match bit. So, for now, there is a
|
// *** hole here.
|
// *** hole here.
|
|
|
// Done sending data, Send the CRC we computed
|
// Done sending data, Send the CRC we computed
|
err |= jtag_write_stream(&crc_calc, 32, 0);
|
err |= jtag_write_stream(&crc_calc, 32, 0);
|
for(i = 0; i < global_DR_prefix_bits; i++) // Push the CRC data all the way to the debug unit
|
for(i = 0; i < global_DR_prefix_bits; i++) // Push the CRC data all the way to the debug unit
|
err |= jtag_write_bit(0); // Can't do this with a stream command without setting TMS on the last bit
|
err |= jtag_write_bit(0); // Can't do this with a stream command without setting TMS on the last bit
|
|
|
// Read the 'CRC match' bit, and go to exit1_dr
|
// Read the 'CRC match' bit, and go to exit1_dr
|
// May need to adjust for other devices in chain!
|
// May need to adjust for other devices in chain!
|
datawords[0] = 0;
|
datawords[0] = 0;
|
err |= jtag_read_write_stream(datawords, &crc_match, 1, 1, 0); // set 'adjust' to pull match bit all the way in
|
err |= jtag_read_write_stream(datawords, &crc_match, 1, 1, 0); // set 'adjust' to pull match bit all the way in
|
// But don't set TMS above, that would shift prefix bits (again), wasting time.
|
// But don't set TMS above, that would shift prefix bits (again), wasting time.
|
err |= jtag_write_bit(TMS); // exit1_dr
|
err |= jtag_write_bit(TMS); // exit1_dr
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
err |= tap_exit_to_idle(); // Go from EXIT1 to IDLE
|
|
|
if(!crc_match) {
|
if(!crc_match) {
|
printf("CRC ERROR! match bit after write is %i (computed CRC 0x%x)", crc_match, crc_calc);
|
printf("CRC ERROR! match bit after write is %i (computed CRC 0x%x)", crc_match, crc_calc);
|
if(!retry_do()) { printf("Retry count exceeded! Abort!\n\n"); exit(1);}
|
if(!retry_do()) { printf("Retry count exceeded! Abort!\n\n"); exit(1);}
|
goto wb_burst_write_retry_full;
|
goto wb_burst_write_retry_full;
|
}
|
}
|
else debug("CRC OK!");
|
else debug("CRC OK!");
|
|
|
|
|
// Now, read the error register and retry/recompute as needed
|
// Now, read the error register and retry/recompute as needed
|
if (current_chain == DC_WISHBONE)
|
if (current_chain == DC_WISHBONE)
|
{
|
{
|
err |= adbg_ctrl_read(DBG_WB_REG_ERROR, err_data, 1); // First, just get 1 bit...read address only if necessary
|
err |= adbg_ctrl_read(DBG_WB_REG_ERROR, err_data, 1); // First, just get 1 bit...read address only if necessary
|
if(err_data[0] & 0x1) { // Then we have a problem.
|
if(err_data[0] & 0x1) { // Then we have a problem.
|
err |= adbg_ctrl_read(DBG_WB_REG_ERROR, err_data, 33);
|
err |= adbg_ctrl_read(DBG_WB_REG_ERROR, err_data, 33);
|
addr = (err_data[0] >> 1) | (err_data[1] << 31);
|
addr = (err_data[0] >> 1) | (err_data[1] << 31);
|
i = (addr - start_address) / word_size_bytes;
|
i = (addr - start_address) / word_size_bytes;
|
printf("ERROR! WB bus error during burst write, address 0x%lX (index 0x%X), retrying!\n", addr, i);
|
printf("ERROR! WB bus error during burst write, address 0x%lX (index 0x%X), retrying!\n", addr, i);
|
bus_error_retries++;
|
bus_error_retries++;
|
if(bus_error_retries > MAX_BUS_ERRORS) {
|
if(bus_error_retries > MAX_BUS_ERRORS) {
|
printf("Max WB bus errors reached!\n");
|
printf("Max WB bus errors reached!\n");
|
return err|APP_ERR_MAX_BUS_ERR;
|
return err|APP_ERR_MAX_BUS_ERR;
|
}
|
}
|
// Don't call retry_do(), a JTAG reset won't help a WB bus error
|
// Don't call retry_do(), a JTAG reset won't help a WB bus error
|
err |= adbg_ctrl_write(DBG_WB_REG_ERROR, err_data, 1); // Write 1 bit, to reset the error register.
|
err |= adbg_ctrl_write(DBG_WB_REG_ERROR, err_data, 1); // Write 1 bit, to reset the error register.
|
goto wb_burst_write_retry_partial;
|
goto wb_burst_write_retry_partial;
|
}
|
}
|
}
|
}
|
|
|
retry_ok();
|
retry_ok();
|
return err;
|
return err;
|
}
|
}
|
|
|