Subversion Repositories pci

//////////////////////////////////////////////////////////////////////

//////////////////////////////////////////////////////////////////////

////                                                              ////

////                                                              ////

////  File name: wb_master.v                                      ////

////  File name: wb_master.v                                      ////

////                                                              ////

////                                                              ////

////  This file is part of the "PCI bridge" project               ////

////  This file is part of the "PCI bridge" project               ////

////  http://www.opencores.org/cores/pci/                         ////

////  http://www.opencores.org/cores/pci/                         ////

////                                                              ////

////                                                              ////

////  Author(s):                                                  ////

////  Author(s):                                                  ////

////      - Tadej Markovic, tadej@opencores.org                   ////

////      - Tadej Markovic, tadej@opencores.org                   ////

////                                                              ////

////                                                              ////

////  All additional information is avaliable in the README.txt   ////

////  All additional information is avaliable in the README.txt   ////

////  file.                                                       ////

////  file.                                                       ////

////                                                              ////

////                                                              ////

////                                                              ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//////////////////////////////////////////////////////////////////////

////                                                              ////

////                                                              ////

//// Copyright (C) 2000 Tadej Markovic, tadej@opencores.org       ////

//// Copyright (C) 2000 Tadej Markovic, tadej@opencores.org       ////

////                                                              ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

//// later version.                                               ////

////                                                              ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

//// details.                                                     ////

////                                                              ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//////////////////////////////////////////////////////////////////////

//

//

// CVS Revision History

// CVS Revision History

//

//

// $Log: not supported by cvs2svn $

// $Log: not supported by cvs2svn $

// Revision 1.2  2001/10/05 08:14:30  mihad

// Revision 1.2  2001/10/05 08:14:30  mihad

// Updated all files with inclusion of timescale file for simulation purposes.

// Updated all files with inclusion of timescale file for simulation purposes.

//

//

// Revision 1.1.1.1  2001/10/02 15:33:47  mihad

// Revision 1.1.1.1  2001/10/02 15:33:47  mihad

// New project directory structure

// New project directory structure

//

//

//

//

`define WB_FSM_BITS 3 // number of bits needed for FSM states

`define WB_FSM_BITS 3 // number of bits needed for FSM states

`include "bus_commands.v"

`include "bus_commands.v"

`include "pci_constants.v"

`include "pci_constants.v"

//synopsys translate_off

//synopsys translate_off

`include "timescale.v"

`include "timescale.v"

//synopsys translate_on

//synopsys translate_on

module WB_MASTER (  wb_clock_in,                // CLK_I

module WB_MASTER (  wb_clock_in,                // CLK_I

                    reset_in,                   // RST_I

                    reset_in,                   // RST_I

                    pci_tar_read_request,

                    pci_tar_read_request,

                                        pci_tar_address,

                                        pci_tar_address,

                                        pci_tar_cmd,

                                        pci_tar_cmd,

                                        pci_tar_be,

                                        pci_tar_be,

                                        pci_tar_burst_ok,

                                        pci_tar_burst_ok,

                                        pci_cache_line_size,

                                        pci_cache_line_size,

                                        cache_lsize_not_zero,

                                        cache_lsize_not_zero,

                                        wb_read_done_out,

                                        wb_read_done_out,

                                        pcir_fifo_wenable_out,

                                        pcir_fifo_wenable_out,

                                        pcir_fifo_data_out,

                                        pcir_fifo_data_out,

                                        pcir_fifo_be_out,

                                        pcir_fifo_be_out,

                                        pcir_fifo_control_out,

                                        pcir_fifo_control_out,

                                        //pcir_fifo_renable_out,                        for PCI Target !!!

                                        //pcir_fifo_renable_out,                        for PCI Target !!!

                                        //pcir_fifo_data_in,                            for PCI Target !!!

                                        //pcir_fifo_data_in,                            for PCI Target !!!

                                        //pcir_fifo_be_in,                                      for PCI Target !!!

                                        //pcir_fifo_be_in,                                      for PCI Target !!!

                                        //pcir_fifo_control_in,                         for PCI Target !!!

                                        //pcir_fifo_control_in,                         for PCI Target !!!

                                        //pcir_fifo_flush_out,                          for PCI Target !!!

                                        //pcir_fifo_flush_out,                          for PCI Target !!!

                                        //pcir_fifo_almost_empty_in,            for PCI Target !!!

                                        //pcir_fifo_almost_empty_in,            for PCI Target !!!

                                        //pcir_fifo_empty_in,                           NOT used

                                        //pcir_fifo_empty_in,                           NOT used

                                        //pcir_fifo_transaction_ready_in,       NOT used

                                        //pcir_fifo_transaction_ready_in,       NOT used

                                        //pciw_fifo_wenable_out,                        for PCI Target !!!

                                        //pciw_fifo_wenable_out,                        for PCI Target !!!

                                        //pciw_fifo_addr_data_out,                      for PCI Target !!!   

                                        //pciw_fifo_addr_data_out,                      for PCI Target !!!   

                                        //pciw_fifo_cbe_out,                            for PCI Target !!!

                                        //pciw_fifo_cbe_out,                            for PCI Target !!!

                                        //pciw_fifo_control_out,                        for PCI Target !!!       

                                        //pciw_fifo_control_out,                        for PCI Target !!!       

                                        pciw_fifo_renable_out,

                                        pciw_fifo_renable_out,

                                        pciw_fifo_addr_data_in,

                                        pciw_fifo_addr_data_in,

                                        pciw_fifo_cbe_in,

                                        pciw_fifo_cbe_in,

                                        pciw_fifo_control_in,

                                        pciw_fifo_control_in,

                                        //pciw_fifo_flush_out,                          NOT used

                                        //pciw_fifo_flush_out,                          NOT used

                                        //pciw_fifo_almost_full_in,             for PCI Target !!!

                                        //pciw_fifo_almost_full_in,             for PCI Target !!!

                                        //pciw_fifo_full_in,                            for PCI Target !!!

                                        //pciw_fifo_full_in,                            for PCI Target !!!

                                        pciw_fifo_almost_empty_in,

                                        pciw_fifo_almost_empty_in,

                                        pciw_fifo_empty_in,

                                        pciw_fifo_empty_in,

                                        pciw_fifo_transaction_ready_in,

                                        pciw_fifo_transaction_ready_in,

                                        pci_error_sig_out,

                                        pci_error_sig_out,

                                        pci_error_bc,

                                        pci_error_bc,

                                        write_rty_cnt_exp_out,

                                        write_rty_cnt_exp_out,

                                        error_source_out,

                                        error_source_out,

                                        read_rty_cnt_exp_out,

                                        read_rty_cnt_exp_out,

                    CYC_O,

                    CYC_O,

                    STB_O,

                    STB_O,

                    WE_O,

                    WE_O,

                    SEL_O,

                    SEL_O,

                    ADR_O,

                    ADR_O,

                    MDATA_I,

                    MDATA_I,

                    MDATA_O,

                    MDATA_O,

                    ACK_I,

                    ACK_I,

                    RTY_I,

                    RTY_I,

                    ERR_I,

                    ERR_I,

                    CAB_O

                    CAB_O

                );

                );

/*----------------------------------------------------------------------------------------------------------------------

/*----------------------------------------------------------------------------------------------------------------------

Various parameters needed for state machine and other stuff

Various parameters needed for state machine and other stuff

----------------------------------------------------------------------------------------------------------------------*/

----------------------------------------------------------------------------------------------------------------------*/

parameter               S_IDLE                  = `WB_FSM_BITS'h0 ;

parameter               S_IDLE                  = `WB_FSM_BITS'h0 ;

parameter               S_WRITE                 = `WB_FSM_BITS'h1 ;

parameter               S_WRITE                 = `WB_FSM_BITS'h1 ;

parameter               S_WRITE_ERR_RTY = `WB_FSM_BITS'h2 ;

parameter               S_WRITE_ERR_RTY = `WB_FSM_BITS'h2 ;

parameter               S_READ                  = `WB_FSM_BITS'h3 ;

parameter               S_READ                  = `WB_FSM_BITS'h3 ;

parameter               S_READ_RTY              = `WB_FSM_BITS'h4 ;

parameter               S_READ_RTY              = `WB_FSM_BITS'h4 ;

parameter               S_TURN_ARROUND  = `WB_FSM_BITS'h5 ;

parameter               S_TURN_ARROUND  = `WB_FSM_BITS'h5 ;

/*----------------------------------------------------------------------------------------------------------------------

/*----------------------------------------------------------------------------------------------------------------------

System signals inputs

System signals inputs

wb_clock_in - WISHBONE bus clock input

wb_clock_in - WISHBONE bus clock input

reset_in    - system reset input controlled by bridge's reset logic

reset_in    - system reset input controlled by bridge's reset logic

----------------------------------------------------------------------------------------------------------------------*/

----------------------------------------------------------------------------------------------------------------------*/

input                   wb_clock_in ;

input                   wb_clock_in ;

input                   reset_in ;

input                   reset_in ;

/*----------------------------------------------------------------------------------------------------------------------

/*----------------------------------------------------------------------------------------------------------------------

Control signals from PCI Target for READS to PCIR_FIFO

Control signals from PCI Target for READS to PCIR_FIFO

---------------------------------------------------------------------------------------------------------------------*/

---------------------------------------------------------------------------------------------------------------------*/

input                   pci_tar_read_request ;          // read request from PCI Target

input                   pci_tar_read_request ;          // read request from PCI Target

input   [31:0]   pci_tar_address ;                       // address for requested read from PCI Target                                   

input   [31:0]   pci_tar_address ;                       // address for requested read from PCI Target                                   

input   [3:0]    pci_tar_cmd ;                           // command for requested read from PCI Target                                   

input   [3:0]    pci_tar_cmd ;                           // command for requested read from PCI Target                                   

input   [3:0]    pci_tar_be ;                            // byte enables for requested read from PCI Target              

input   [3:0]    pci_tar_be ;                            // byte enables for requested read from PCI Target              

input                   pci_tar_burst_ok ;

input                   pci_tar_burst_ok ;

input   [7:0]    pci_cache_line_size ;           // CACHE line size register value for burst length   

input   [7:0]    pci_cache_line_size ;           // CACHE line size register value for burst length   

input                   cache_lsize_not_zero ;

input                   cache_lsize_not_zero ;

output                  wb_read_done_out ;                              // read done and PCIR_FIFO has data ready

output                  wb_read_done_out ;                              // read done and PCIR_FIFO has data ready

reg                             wb_read_done_out ;

reg                             wb_read_done_out ;

reg                             wb_read_done ;

reg                             wb_read_done ;

/*----------------------------------------------------------------------------------------------------------------------

/*----------------------------------------------------------------------------------------------------------------------

PCIR_FIFO control signals used for sinking data into PCIR_FIFO and status monitoring

PCIR_FIFO control signals used for sinking data into PCIR_FIFO and status monitoring

---------------------------------------------------------------------------------------------------------------------*/

---------------------------------------------------------------------------------------------------------------------*/

output                  pcir_fifo_wenable_out ;         // PCIR_FIFO write enable output

output                  pcir_fifo_wenable_out ;         // PCIR_FIFO write enable output

output  [31:0]   pcir_fifo_data_out ;            // data output to PCIR_FIFO

output  [31:0]   pcir_fifo_data_out ;            // data output to PCIR_FIFO

output  [3:0]    pcir_fifo_be_out ;                      // byte enable output to PCIR_FIFO

output  [3:0]    pcir_fifo_be_out ;                      // byte enable output to PCIR_FIFO

output  [3:0]    pcir_fifo_control_out ;         // control bus output to PCIR_FIFO

output  [3:0]    pcir_fifo_control_out ;         // control bus output to PCIR_FIFO

reg             [31:0]   pcir_fifo_data_out ;

reg             [31:0]   pcir_fifo_data_out ;

reg                             pcir_fifo_wenable_out ;

reg                             pcir_fifo_wenable_out ;

reg                             pcir_fifo_wenable ;

reg                             pcir_fifo_wenable ;

reg             [3:0]    pcir_fifo_control_out ;

reg             [3:0]    pcir_fifo_control_out ;

reg             [3:0]    pcir_fifo_control ;

reg             [3:0]    pcir_fifo_control ;

/*----------------------------------------------------------------------------------------------------------------------

/*----------------------------------------------------------------------------------------------------------------------

PCIW_FIFO control signals used for fetching data from PCIW_FIFO and status monitoring

PCIW_FIFO control signals used for fetching data from PCIW_FIFO and status monitoring

---------------------------------------------------------------------------------------------------------------------*/

---------------------------------------------------------------------------------------------------------------------*/

output                  pciw_fifo_renable_out ;         // read enable for PCIW_FIFO output

output                  pciw_fifo_renable_out ;         // read enable for PCIW_FIFO output

input   [31:0]   pciw_fifo_addr_data_in ;        // address and data input from PCIW_FIFO

input   [31:0]   pciw_fifo_addr_data_in ;        // address and data input from PCIW_FIFO

input   [3:0]    pciw_fifo_cbe_in ;                      // command and byte_enables from PCIW_FIFO

input   [3:0]    pciw_fifo_cbe_in ;                      // command and byte_enables from PCIW_FIFO

input   [3:0]    pciw_fifo_control_in ;          // control bus input from PCIW_FIFO

input   [3:0]    pciw_fifo_control_in ;          // control bus input from PCIW_FIFO

input                   pciw_fifo_almost_empty_in ;     // almost empty status indicator from PCIW_FIFO

input                   pciw_fifo_almost_empty_in ;     // almost empty status indicator from PCIW_FIFO

input                   pciw_fifo_empty_in ;            // empty status indicator from PCIW_FIFO

input                   pciw_fifo_empty_in ;            // empty status indicator from PCIW_FIFO

input                   pciw_fifo_transaction_ready_in ;        // write transaction is ready in PCIW_FIFO

input                   pciw_fifo_transaction_ready_in ;        // write transaction is ready in PCIW_FIFO

reg                             pciw_fifo_renable_out ;

reg                             pciw_fifo_renable_out ;

reg                             pciw_fifo_renable ;

reg                             pciw_fifo_renable ;

/*----------------------------------------------------------------------------------------------------------------------

/*----------------------------------------------------------------------------------------------------------------------

Control INPUT / OUTPUT signals for configuration space reporting registers !!!

Control INPUT / OUTPUT signals for configuration space reporting registers !!!

---------------------------------------------------------------------------------------------------------------------*/

---------------------------------------------------------------------------------------------------------------------*/

output                  pci_error_sig_out ;                     // When error occures (on WB bus, retry counter, etc.)

output                  pci_error_sig_out ;                     // When error occures (on WB bus, retry counter, etc.)

output  [3:0]   pci_error_bc ;                           // bus command at which error occured !

output  [3:0]   pci_error_bc ;                           // bus command at which error occured !

output                  write_rty_cnt_exp_out ;         // Signaling that RETRY counter has expired during write transaction!

output                  write_rty_cnt_exp_out ;         // Signaling that RETRY counter has expired during write transaction!

output                  read_rty_cnt_exp_out ;          // Signaling that RETRY counter has expired during read transaction!

output                  read_rty_cnt_exp_out ;          // Signaling that RETRY counter has expired during read transaction!

                                                                                        //  if error_source is '0' other side didn't respond

                                                                                        //  if error_source is '0' other side didn't respond

                                                                                        //  if error_source is '1' other side RETRIED for max retry counter value

                                                                                        //  if error_source is '1' other side RETRIED for max retry counter value

output                  error_source_out ;                      // Signaling error source - '0' other WB side signaled error OR didn't respond

output                  error_source_out ;                      // Signaling error source - '0' other WB side signaled error OR didn't respond

                                                                                        //   if '1' wridge counted max value in retry counter because of RTY responds

                                                                                        //   if '1' wridge counted max value in retry counter because of RTY responds

reg                             pci_error_sig_out ;

reg                             pci_error_sig_out ;

reg                             write_rty_cnt_exp_out ;

reg                             write_rty_cnt_exp_out ;

reg                             read_rty_cnt_exp_out ;

reg                             read_rty_cnt_exp_out ;

reg                             error_source_out ;

reg                             error_source_out ;

/*----------------------------------------------------------------------------------------------------------------------

/*----------------------------------------------------------------------------------------------------------------------

WISHBONE bus interface signals - can be connected directly to WISHBONE bus

WISHBONE bus interface signals - can be connected directly to WISHBONE bus

---------------------------------------------------------------------------------------------------------------------*/

---------------------------------------------------------------------------------------------------------------------*/

output          CYC_O ;                 // cycle indicator output

output          CYC_O ;                 // cycle indicator output

output          STB_O ;                 // strobe output - data is valid when strobe and cycle indicator are high

output          STB_O ;                 // strobe output - data is valid when strobe and cycle indicator are high

output          WE_O  ;                 // write enable output - 1 - write operation, 0 - read operation

output          WE_O  ;                 // write enable output - 1 - write operation, 0 - read operation

output  [3:0]   SEL_O ;                  // Byte select outputs

output  [3:0]   SEL_O ;                  // Byte select outputs

output  [31:0]  ADR_O ;                  // WISHBONE address output

output  [31:0]  ADR_O ;                  // WISHBONE address output

input   [31:0]  MDATA_I ;                // WISHBONE slave interface input data bus

input   [31:0]  MDATA_I ;                // WISHBONE slave interface input data bus

output  [31:0]  MDATA_O ;                // WISHBONE slave interface output data bus

output  [31:0]  MDATA_O ;                // WISHBONE slave interface output data bus

input           ACK_I ;                 // Acknowledge input - qualifies valid data on data output bus or received data on data input bus

input           ACK_I ;                 // Acknowledge input - qualifies valid data on data output bus or received data on data input bus

input           RTY_I ;                 // retry input - signals from WISHBONE slave that cycle should be terminated and retried later

input           RTY_I ;                 // retry input - signals from WISHBONE slave that cycle should be terminated and retried later

input           ERR_I ;                 // Signals from WISHBONE slave that access resulted in an error

input           ERR_I ;                 // Signals from WISHBONE slave that access resulted in an error

output          CAB_O ;                 // consecutive address burst output - indicated that master will do a serial address transfer in current cycle

output          CAB_O ;                 // consecutive address burst output - indicated that master will do a serial address transfer in current cycle

reg                     CYC_O ;

reg                     CYC_O ;

reg                     STB_O ;

reg                     STB_O ;

reg                     WE_O  ;

reg                     WE_O  ;

reg             [3:0]   SEL_O ;

reg             [3:0]   SEL_O ;

reg             [31:0]  MDATA_O ;

reg             [31:0]  MDATA_O ;

reg                     CAB_O ;

reg                     CAB_O ;

/*###########################################################################################################

/*###########################################################################################################

/////////////////////////////////////////////////////////////////////////////////////////////////////////////

/////////////////////////////////////////////////////////////////////////////////////////////////////////////

        LOGIC, COUNTERS, STATE MACHINE and some control register bits

        LOGIC, COUNTERS, STATE MACHINE and some control register bits

        =============================================================

        =============================================================

/////////////////////////////////////////////////////////////////////////////////////////////////////////////

/////////////////////////////////////////////////////////////////////////////////////////////////////////////

###########################################################################################################*/

###########################################################################################################*/

// wire for write attempt - 1 when PCI Target attempt to write and PCIW_FIFO has a write transaction ready

// wire for write attempt - 1 when PCI Target attempt to write and PCIW_FIFO has a write transaction ready

// wire for read attempt - 1 when PCI Target is attempting a read and PCIR_FIFO is not full !

// wire for read attempt - 1 when PCI Target is attempting a read and PCIR_FIFO is not full !

// because of transaction ordering, PCI Master must not start read untill all writes are done -> at that

// because of transaction ordering, PCI Master must not start read untill all writes are done -> at that

//   moment PCIW_FIFO is empty !!! (when read is pending PCI Target will block new reads and writes)

//   moment PCIW_FIFO is empty !!! (when read is pending PCI Target will block new reads and writes)

// Signal is used for reads on WB, when there is retry!

// Signal is used for reads on WB, when there is retry!

reg                             first_wb_data_access ;

reg                             first_wb_data_access ;

reg                             last_data_from_pciw_fifo ;      // signal tells when there is last data in pciw_fifo

reg                             last_data_from_pciw_fifo ;      // signal tells when there is last data in pciw_fifo

reg                             last_data_from_pciw_fifo_reg ;

reg                             last_data_from_pciw_fifo_reg ;

reg                             last_data_to_pcir_fifo ;        // signal tells when there will be last data for pcir_fifo

reg                             last_data_to_pcir_fifo ;        // signal tells when there will be last data for pcir_fifo

// Logic used in State Machine logic implemented out of State Machine because of less delay!

// Logic used in State Machine logic implemented out of State Machine because of less delay!

always@(pciw_fifo_control_in or pciw_fifo_almost_empty_in)

always@(pciw_fifo_control_in or pciw_fifo_almost_empty_in)

begin

begin

        if (pciw_fifo_control_in[`LAST_CTRL_BIT] || pciw_fifo_almost_empty_in) // if last data is going to be transfered

        if (pciw_fifo_control_in[`LAST_CTRL_BIT] || pciw_fifo_almost_empty_in) // if last data is going to be transfered

                last_data_from_pciw_fifo <= 1'b1 ; // signal for last data from PCIW_FIFO

                last_data_from_pciw_fifo <= 1'b1 ; // signal for last data from PCIW_FIFO

        else

        else

                last_data_from_pciw_fifo <= 1'b0 ;

                last_data_from_pciw_fifo <= 1'b0 ;

end

end

        reg read_count_load;

        reg read_count_load;

        reg read_count_enable;

        reg read_count_enable;

        reg [(`PCIR_ADDR_LENGTH - 1):0] max_read_count ;

        reg [(`PCIR_ADDR_LENGTH - 1):0] max_read_count ;

        always@(pci_cache_line_size or cache_lsize_not_zero or pci_tar_cmd)

        always@(pci_cache_line_size or cache_lsize_not_zero or pci_tar_cmd)

        begin

        begin

                if (cache_lsize_not_zero)

                if (cache_lsize_not_zero)

                    if ( (pci_cache_line_size >= `PCIR_DEPTH) || (~pci_tar_cmd[1] && ~pci_tar_cmd[0]) )

                    if ( (pci_cache_line_size >= `PCIR_DEPTH) || (~pci_tar_cmd[1] && ~pci_tar_cmd[0]) )

                        // If cache line size is larger than FIFO or BC_MEM_READ_MUL command is performed!

                        // If cache line size is larger than FIFO or BC_MEM_READ_MUL command is performed!

                        max_read_count = `PCIR_DEPTH - 1'b1;

                        max_read_count = `PCIR_DEPTH - 1'b1;

                    else

                    else

                    max_read_count = pci_cache_line_size ;

                    max_read_count = pci_cache_line_size ;

            else

            else

                max_read_count = 1'b1;

                max_read_count = 1'b1;

        end

        end

        reg [(`PCIR_ADDR_LENGTH - 1):0] read_count ;

        reg [(`PCIR_ADDR_LENGTH - 1):0] read_count ;

        // cache line bound indicator - it signals when data for one complete cacheline was read

        // cache line bound indicator - it signals when data for one complete cacheline was read

        wire read_bound_comb = ~|( { read_count[(`PCIR_ADDR_LENGTH - 1):2], read_count[0] } ) ;

        wire read_bound_comb = ~|( { read_count[(`PCIR_ADDR_LENGTH - 1):2], read_count[0] } ) ;

        reg  read_bound ;

        reg  read_bound ;

        always@(posedge wb_clock_in or posedge reset_in)

        always@(posedge wb_clock_in or posedge reset_in)

        begin

        begin

            if ( reset_in )

            if ( reset_in )

                read_bound <= #`FF_DELAY 1'b0 ;

                read_bound <= #`FF_DELAY 1'b0 ;

            else if (read_count_load)

            else if (read_count_load)

                read_bound <= #`FF_DELAY 1'b0 ;

                read_bound <= #`FF_DELAY 1'b0 ;

            else if ( read_count_enable )

            else if ( read_count_enable )

                read_bound <= #`FF_DELAY read_bound_comb ;

                read_bound <= #`FF_DELAY read_bound_comb ;

        end

        end

        // down counter with load

        // down counter with load

        always@(posedge reset_in or posedge wb_clock_in)

        always@(posedge reset_in or posedge wb_clock_in)

        begin

        begin

            if (reset_in)

            if (reset_in)

                read_count <= #`FF_DELAY 0 ;

                read_count <= #`FF_DELAY 0 ;

            else

            else

            if (read_count_load)

            if (read_count_load)

                read_count <= #`FF_DELAY max_read_count ;

                read_count <= #`FF_DELAY max_read_count ;

            else

            else

            if (read_count_enable)

            if (read_count_enable)

                read_count <= #`FF_DELAY read_count - 1'b1 ;

                read_count <= #`FF_DELAY read_count - 1'b1 ;

        end

        end

// Logic used in State Machine logic implemented out of State Machine because of less delay!

// Logic used in State Machine logic implemented out of State Machine because of less delay!

//   definition of signal telling, when there is last data written into FIFO

//   definition of signal telling, when there is last data written into FIFO

begin

begin

        // burst is OK for reads when there is ((MEM_READ_LN or MEM_READ_MUL) and AD[1:0]==2'b00) OR

        // burst is OK for reads when there is ((MEM_READ_LN or MEM_READ_MUL) and AD[1:0]==2'b00) OR

        //   (MEM_READ and Prefetchable_IMAGE and AD[1:0]==2'b00) -> pci_tar_burst_ok

        //   (MEM_READ and Prefetchable_IMAGE and AD[1:0]==2'b00) -> pci_tar_burst_ok

        case ({pci_tar_cmd, pci_tar_burst_ok})

        case ({pci_tar_cmd, pci_tar_burst_ok})

        {`BC_MEM_READ, 1'b1},

        {`BC_MEM_READ, 1'b1},

        {`BC_MEM_READ_LN, 1'b1} :

        {`BC_MEM_READ_LN, 1'b1} :

        begin   // when burst cycle

        begin   // when burst cycle

                        last_data_to_pcir_fifo <= 1'b1 ;

                        last_data_to_pcir_fifo <= 1'b1 ;

                else

                else

                        last_data_to_pcir_fifo <= 1'b0 ;

                        last_data_to_pcir_fifo <= 1'b0 ;

        end

        end

        {`BC_MEM_READ_MUL, 1'b1} :

        {`BC_MEM_READ_MUL, 1'b1} :

        begin   // when burst cycle

        begin   // when burst cycle

                        last_data_to_pcir_fifo <= 1'b1 ;

                        last_data_to_pcir_fifo <= 1'b1 ;

                else

                else

                        last_data_to_pcir_fifo <= 1'b0 ;

                        last_data_to_pcir_fifo <= 1'b0 ;

        end

        end

        default :

        default :

        // {`BC_IO_READ, 1'b0},

        // {`BC_IO_READ, 1'b0},

        // {`BC_IO_READ, 1'b1},

        // {`BC_IO_READ, 1'b1},

        // {`BC_MEM_READ, 1'b0},

        // {`BC_MEM_READ, 1'b0},

        // {`BC_MEM_READ_LN, 1'b0},

        // {`BC_MEM_READ_LN, 1'b0},

        // {`BC_MEM_READ_MUL, 1'b0}:

        // {`BC_MEM_READ_MUL, 1'b0}:

        begin   // when single cycle

        begin   // when single cycle

                last_data_to_pcir_fifo <= 1'b1 ;

                last_data_to_pcir_fifo <= 1'b1 ;

        end

        end

        endcase

        endcase

end

end

reg             [3:0]    wb_no_response_cnt ;

reg             [3:0]    wb_no_response_cnt ;

reg             [3:0]    wb_response_value ;

reg             [3:0]    wb_response_value ;

reg                             wait_for_wb_response ;

reg                             wait_for_wb_response ;

reg                             set_retry ; // 

reg                             set_retry ; // 

// internal WB no response retry generator counter!

// internal WB no response retry generator counter!

always@(posedge reset_in or posedge wb_clock_in)

always@(posedge reset_in or posedge wb_clock_in)

begin

begin

        if (reset_in)

        if (reset_in)

                wb_no_response_cnt <= #`FF_DELAY 4'h0 ;

                wb_no_response_cnt <= #`FF_DELAY 4'h0 ;

        else

        else

                wb_no_response_cnt <= #`FF_DELAY wb_response_value ;

                wb_no_response_cnt <= #`FF_DELAY wb_response_value ;

end

end

// internal WB no response retry generator logic

// internal WB no response retry generator logic

always@(wait_for_wb_response or wb_no_response_cnt or ACK_I or ERR_I or RTY_I)

always@(wait_for_wb_response or wb_no_response_cnt or ACK_I or ERR_I or RTY_I)

begin

begin

        if (wb_no_response_cnt == 4'h8) // when there isn't response for 8 clocks, set internal retry

        if (wb_no_response_cnt == 4'h8) // when there isn't response for 8 clocks, set internal retry

        begin

        begin

                wb_response_value <= 4'h0 ;

                wb_response_value <= 4'h0 ;

                set_retry <= 1'b1 ;

                set_retry <= 1'b1 ;

        end

        end

        else

        else

        begin

        begin

                if (ACK_I || ERR_I || RTY_I) // if device responded, then ZERO must be written into counter

                if (ACK_I || ERR_I || RTY_I) // if device responded, then ZERO must be written into counter

                        wb_response_value <= 4'h0 ;

                        wb_response_value <= 4'h0 ;

                else

                else

                if (wait_for_wb_response)

                if (wait_for_wb_response)

                        wb_response_value <= wb_no_response_cnt + 1'h1 ; // count clocks when no response

                        wb_response_value <= wb_no_response_cnt + 1'h1 ; // count clocks when no response

                else

                else

                        wb_response_value <= wb_no_response_cnt ;

                        wb_response_value <= wb_no_response_cnt ;

                set_retry <= 1'b0 ;

                set_retry <= 1'b0 ;

        end

        end

end

end

wire    retry = RTY_I || set_retry ; // retry signal - logic OR function between RTY_I and internal WB no response retry!

wire    retry = RTY_I || set_retry ; // retry signal - logic OR function between RTY_I and internal WB no response retry!

reg             [7:0]    rty_counter ; // output from retry counter

reg             [7:0]    rty_counter ; // output from retry counter

reg             [7:0]    rty_counter_in ; // input value - output value + 1 OR output value

reg             [7:0]    rty_counter_in ; // input value - output value + 1 OR output value

reg                             rty_counter_max_value ; // signal tells when retry counter riches maximum value!

reg                             rty_counter_max_value ; // signal tells when retry counter riches maximum value!

reg                             reset_rty_cnt ; // signal for asynchronous reset of retry counter after each complete transfere

reg                             reset_rty_cnt ; // signal for asynchronous reset of retry counter after each complete transfere

// sinchronous signal after each transfere and asynchronous signal 'reset_rty_cnt' after reset  

// sinchronous signal after each transfere and asynchronous signal 'reset_rty_cnt' after reset  

//   for reseting the retry counter

//   for reseting the retry counter

always@(posedge reset_in or posedge wb_clock_in)

always@(posedge reset_in or posedge wb_clock_in)

begin

begin

        if (reset_in)

        if (reset_in)

                reset_rty_cnt <= 1'b1 ; // asynchronous set when reset signal is active

                reset_rty_cnt <= 1'b1 ; // asynchronous set when reset signal is active

        else

        else

end

end

// Retry counter register control

// Retry counter register control

always@(posedge reset_in or posedge wb_clock_in)

always@(posedge reset_in or posedge wb_clock_in)

begin

begin

        if (reset_in)

        if (reset_in)

                rty_counter <= #`FF_DELAY 8'h00 ;

                rty_counter <= #`FF_DELAY 8'h00 ;

        else

        else

        begin

        begin

                if (reset_rty_cnt)

                if (reset_rty_cnt)

                        rty_counter <= #`FF_DELAY 8'h00 ;

                        rty_counter <= #`FF_DELAY 8'h00 ;

                else if (retry)

                else if (retry)

                        rty_counter <= #`FF_DELAY rty_counter_in ;

                        rty_counter <= #`FF_DELAY rty_counter_in ;

        end

        end

end

end

// Retry counter logic

// Retry counter logic

always@(rty_counter)

always@(rty_counter)

begin

begin

        if(rty_counter == `WB_RTY_CNT_MAX) // stop counting

        if(rty_counter == `WB_RTY_CNT_MAX) // stop counting

        begin

        begin

        rty_counter_in <= rty_counter ;

        rty_counter_in <= rty_counter ;

        rty_counter_max_value <= 1'b1 ;

        rty_counter_max_value <= 1'b1 ;

        end

        end

        else

        else

        begin

        begin

        rty_counter_in <= rty_counter + 1'b1 ; // count up

        rty_counter_in <= rty_counter + 1'b1 ; // count up

        rty_counter_max_value <= 1'b0 ;

        rty_counter_max_value <= 1'b0 ;

        end

        end

end

end

reg             [31:0]   addr_cnt_out ;  // output value from address counter to WB ADDRESS output

reg             [31:0]   addr_cnt_out ;  // output value from address counter to WB ADDRESS output

reg             [31:0]   addr_cnt_in ;   // input address value to address counter

reg             [31:0]   addr_cnt_in ;   // input address value to address counter

reg                             addr_into_cnt ; // control signal for loading starting address into counter

reg                             addr_into_cnt ; // control signal for loading starting address into counter

reg                             addr_count ; // control signal for count enable

reg                             addr_count ; // control signal for count enable

reg             [3:0]    bc_register ; // used when error occures during writes!

reg             [3:0]    bc_register ; // used when error occures during writes!

// wb address counter register control

// wb address counter register control

always@(posedge wb_clock_in or posedge reset_in)

always@(posedge wb_clock_in or posedge reset_in)

begin

begin

        if (reset_in) // reset counter

        if (reset_in) // reset counter

        begin

        begin

                addr_cnt_out <= #`FF_DELAY 32'h0000_0000 ;

                addr_cnt_out <= #`FF_DELAY 32'h0000_0000 ;

                bc_register  <= #`FF_DELAY 4'h0 ;

                bc_register  <= #`FF_DELAY 4'h0 ;

        end

        end

        else

        else

        begin

        begin

                addr_cnt_out <= #`FF_DELAY addr_cnt_in ; // count up or hold value depending on cache line counter logic

                addr_cnt_out <= #`FF_DELAY addr_cnt_in ; // count up or hold value depending on cache line counter logic

                if (addr_into_cnt)

                if (addr_into_cnt)

                        bc_register  <= #`FF_DELAY pciw_fifo_cbe_in ;

                        bc_register  <= #`FF_DELAY pciw_fifo_cbe_in ;

        end

        end

end

end

// when '1', the bus command is IO command - not supported commands are checked in pci_decoder modules

// when '1', the bus command is IO command - not supported commands are checked in pci_decoder modules

wire    io_memory_bus_command = !pci_tar_cmd[3] && !pci_tar_cmd[2] ;

wire    io_memory_bus_command = !pci_tar_cmd[3] && !pci_tar_cmd[2] ;

// wb address counter logic

// wb address counter logic

always@(addr_into_cnt or r_attempt or addr_count or pciw_fifo_addr_data_in or pci_tar_address or addr_cnt_out or

always@(addr_into_cnt or r_attempt or addr_count or pciw_fifo_addr_data_in or pci_tar_address or addr_cnt_out or

                io_memory_bus_command)

                io_memory_bus_command)

begin

begin

        if (addr_into_cnt) // load starting address into counter

        if (addr_into_cnt) // load starting address into counter

        begin

        begin

                if (r_attempt)

                if (r_attempt)

                begin // if read request, then load read addresss from PCI Target

                begin // if read request, then load read addresss from PCI Target

                        addr_cnt_in = {pci_tar_address[31:2], pci_tar_address[1] && io_memory_bus_command,

                        addr_cnt_in = {pci_tar_address[31:2], pci_tar_address[1] && io_memory_bus_command,

                                                                                                  pci_tar_address[0] && io_memory_bus_command} ;

                                                                                                  pci_tar_address[0] && io_memory_bus_command} ;

                end

                end

                else

                else

                begin // if not read request, then load write address from PCIW_FIFO

                begin // if not read request, then load write address from PCIW_FIFO

                        addr_cnt_in = pciw_fifo_addr_data_in[31:0] ;

                        addr_cnt_in = pciw_fifo_addr_data_in[31:0] ;

                end

                end

        end

        end

        else

        else

        if (addr_count)

        if (addr_count)

        begin

        begin

                addr_cnt_in = addr_cnt_out + 3'h4 ; // count up for 32-bit alligned address 

                addr_cnt_in = addr_cnt_out + 3'h4 ; // count up for 32-bit alligned address 

        end

        end

        else

        else

        begin

        begin

                addr_cnt_in = addr_cnt_out ;

                addr_cnt_in = addr_cnt_out ;

        end

        end

end

end

reg wb_stb_o ; // Internal signal for driwing STB_O on WB bus

reg wb_stb_o ; // Internal signal for driwing STB_O on WB bus

reg wb_we_o ; // Internal signal for driwing WE_O on WB bus

reg wb_we_o ; // Internal signal for driwing WE_O on WB bus

reg wb_cyc_o ; // Internal signal for driwing CYC_O on WB bus and for enableing burst signal generation

reg wb_cyc_o ; // Internal signal for driwing CYC_O on WB bus and for enableing burst signal generation

reg     retried ; // Signal is output value from FF and is set for one clock period after retried_d is set

reg     retried ; // Signal is output value from FF and is set for one clock period after retried_d is set

reg     retried_d ; // Signal is set whenever cycle is retried and is input to FF for delaying -> used in S_IDLE state

reg     retried_d ; // Signal is set whenever cycle is retried and is input to FF for delaying -> used in S_IDLE state

reg             first_data_is_burst ; // Signal is set in S_WRITE or S_READ states, when data transfere is burst!

reg             first_data_is_burst ; // Signal is set in S_WRITE or S_READ states, when data transfere is burst!

reg             first_data_is_burst_reg ;

reg             first_data_is_burst_reg ;

wire    burst_transfer ; // This signal is set when data transfere is burst and is reset with RESET or last data transfered

wire    burst_transfer ; // This signal is set when data transfere is burst and is reset with RESET or last data transfered

// FFs output signals tell, when there is first data out from FIFO (for BURST checking)

// FFs output signals tell, when there is first data out from FIFO (for BURST checking)

//   and for delaying retried signal

//   and for delaying retried signal

always@(posedge wb_clock_in or posedge reset_in)

always@(posedge wb_clock_in or posedge reset_in)

begin

begin

        if (reset_in) // reset signals

        if (reset_in) // reset signals

        begin

        begin

                retried <= #`FF_DELAY 1'b0 ;

                retried <= #`FF_DELAY 1'b0 ;

        end

        end

        else

        else

        begin

        begin

                retried <= #`FF_DELAY retried_d ; // delaying retried signal  

                retried <= #`FF_DELAY retried_d ; // delaying retried signal  

        end

        end

end

end

// Determinig if first data is a part of BURST or just a single transfere!

// Determinig if first data is a part of BURST or just a single transfere!

always@(addr_into_cnt or r_attempt or pci_tar_burst_ok or max_read_count or

always@(addr_into_cnt or r_attempt or pci_tar_burst_ok or max_read_count or

                pciw_fifo_control_in or pciw_fifo_empty_in)

                pciw_fifo_control_in or pciw_fifo_empty_in)

begin

begin

        if (addr_into_cnt)

        if (addr_into_cnt)

        begin

        begin

                if (r_attempt)

                if (r_attempt)

                begin

                begin

                                // burst is OK for reads when there is ((MEM_READ_LN or MEM_READ_MUL) and AD[1:0]==2'b00) OR

                                // burst is OK for reads when there is ((MEM_READ_LN or MEM_READ_MUL) and AD[1:0]==2'b00) OR

                                //   (MEM_READ and Prefetchable_IMAGE and AD[1:0]==2'b00) -> pci_tar_burst_ok

                                //   (MEM_READ and Prefetchable_IMAGE and AD[1:0]==2'b00) -> pci_tar_burst_ok

                        if  (pci_tar_burst_ok && (max_read_count != 8'h1))

                        if  (pci_tar_burst_ok && (max_read_count != 8'h1))

                                first_data_is_burst <= 1'b1 ;

                                first_data_is_burst <= 1'b1 ;

                        else

                        else

                                first_data_is_burst <= 1'b0 ;

                                first_data_is_burst <= 1'b0 ;

                end

                end

                else

                else

                begin

                begin

                        first_data_is_burst <= 1'b0 ;

                        first_data_is_burst <= 1'b0 ;

                end

                end

        end

        end

        else

        else

                first_data_is_burst <= pciw_fifo_control_in[`BURST_BIT] && ~pciw_fifo_empty_in ;

                first_data_is_burst <= pciw_fifo_control_in[`BURST_BIT] && ~pciw_fifo_empty_in ;

end

end