//////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////
|
//// ////
|
//// ////
|
//// File name "wbw_fifo_control.v" ////
|
//// File name "wbw_fifo_control.v" ////
|
//// ////
|
//// ////
|
//// This file is part of the "PCI bridge" project ////
|
//// This file is part of the "PCI bridge" project ////
|
//// http://www.opencores.org/cores/pci/ ////
|
//// http://www.opencores.org/cores/pci/ ////
|
//// ////
|
//// ////
|
//// Author(s): ////
|
//// Author(s): ////
|
//// - Miha Dolenc (mihad@opencores.org) ////
|
//// - Miha Dolenc (mihad@opencores.org) ////
|
//// ////
|
//// ////
|
//// All additional information is avaliable in the README ////
|
//// All additional information is avaliable in the README ////
|
//// file. ////
|
//// file. ////
|
//// ////
|
//// ////
|
//// ////
|
//// ////
|
//////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////
|
//// ////
|
//// ////
|
//// Copyright (C) 2001 Miha Dolenc, mihad@opencores.org ////
|
//// Copyright (C) 2001 Miha Dolenc, mihad@opencores.org ////
|
//// ////
|
//// ////
|
//// This source file may be used and distributed without ////
|
//// This source file may be used and distributed without ////
|
//// restriction provided that this copyright statement is not ////
|
//// restriction provided that this copyright statement is not ////
|
//// removed from the file and that any derivative work contains ////
|
//// removed from the file and that any derivative work contains ////
|
//// the original copyright notice and the associated disclaimer. ////
|
//// the original copyright notice and the associated disclaimer. ////
|
//// ////
|
//// ////
|
//// This source file is free software; you can redistribute it ////
|
//// This source file is free software; you can redistribute it ////
|
//// and/or modify it under the terms of the GNU Lesser General ////
|
//// and/or modify it under the terms of the GNU Lesser General ////
|
//// Public License as published by the Free Software Foundation; ////
|
//// Public License as published by the Free Software Foundation; ////
|
//// either version 2.1 of the License, or (at your option) any ////
|
//// either version 2.1 of the License, or (at your option) any ////
|
//// later version. ////
|
//// later version. ////
|
//// ////
|
//// ////
|
//// This source is distributed in the hope that it will be ////
|
//// This source is distributed in the hope that it will be ////
|
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
|
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
|
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
|
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
|
//// PURPOSE. See the GNU Lesser General Public License for more ////
|
//// PURPOSE. See the GNU Lesser General Public License for more ////
|
//// details. ////
|
//// details. ////
|
//// ////
|
//// ////
|
//// You should have received a copy of the GNU Lesser General ////
|
//// You should have received a copy of the GNU Lesser General ////
|
//// Public License along with this source; if not, download it ////
|
//// Public License along with this source; if not, download it ////
|
//// from http://www.opencores.org/lgpl.shtml ////
|
//// from http://www.opencores.org/lgpl.shtml ////
|
//// ////
|
//// ////
|
//////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////
|
//
|
//
|
// CVS Revision History
|
// CVS Revision History
|
//
|
//
|
// $Log: not supported by cvs2svn $
|
// $Log: not supported by cvs2svn $
|
|
// Revision 1.1 2003/01/27 16:49:31 mihad
|
|
// Changed module and file names. Updated scripts accordingly. FIFO synchronizations changed.
|
|
//
|
// Revision 1.6 2002/11/27 20:36:13 mihad
|
// Revision 1.6 2002/11/27 20:36:13 mihad
|
// Changed the code a bit to make it more readable.
|
// Changed the code a bit to make it more readable.
|
// Functionality not changed in any way.
|
// Functionality not changed in any way.
|
// More robust synchronization in fifos is still pending.
|
// More robust synchronization in fifos is still pending.
|
//
|
//
|
// Revision 1.5 2002/09/30 16:03:04 mihad
|
// Revision 1.5 2002/09/30 16:03:04 mihad
|
// Added meta flop module for easier meta stable FF identification during synthesis
|
// Added meta flop module for easier meta stable FF identification during synthesis
|
//
|
//
|
// Revision 1.4 2002/09/25 15:53:52 mihad
|
// Revision 1.4 2002/09/25 15:53:52 mihad
|
// Removed all logic from asynchronous reset network
|
// Removed all logic from asynchronous reset network
|
//
|
//
|
// Revision 1.3 2002/02/01 15:25:14 mihad
|
// Revision 1.3 2002/02/01 15:25:14 mihad
|
// Repaired a few bugs, updated specification, added test bench files and design document
|
// Repaired a few bugs, updated specification, added test bench files and design document
|
//
|
//
|
// Revision 1.2 2001/10/05 08:14:30 mihad
|
// Revision 1.2 2001/10/05 08:14:30 mihad
|
// Updated all files with inclusion of timescale file for simulation purposes.
|
// Updated all files with inclusion of timescale file for simulation purposes.
|
//
|
//
|
// Revision 1.1.1.1 2001/10/02 15:33:47 mihad
|
// Revision 1.1.1.1 2001/10/02 15:33:47 mihad
|
// New project directory structure
|
// New project directory structure
|
//
|
//
|
//
|
//
|
|
|
/* FIFO_CONTROL module provides read/write address and status generation for
|
/* FIFO_CONTROL module provides read/write address and status generation for
|
FIFOs implemented with standard dual port SRAM cells in ASIC or FPGA designs */
|
FIFOs implemented with standard dual port SRAM cells in ASIC or FPGA designs */
|
`include "pci_constants.v"
|
`include "pci_constants.v"
|
// synopsys translate_off
|
// synopsys translate_off
|
`include "timescale.v"
|
`include "timescale.v"
|
// synopsys translate_on
|
// synopsys translate_on
|
|
|
module pci_wbw_fifo_control
|
module pci_wbw_fifo_control
|
(
|
(
|
rclock_in,
|
rclock_in,
|
wclock_in,
|
wclock_in,
|
renable_in,
|
renable_in,
|
wenable_in,
|
wenable_in,
|
reset_in,
|
reset_in,
|
// flush_in, // not used
|
// flush_in, // not used
|
almost_full_out,
|
almost_full_out,
|
full_out,
|
full_out,
|
empty_out,
|
empty_out,
|
waddr_out,
|
waddr_out,
|
raddr_out,
|
raddr_out,
|
rallow_out,
|
rallow_out,
|
wallow_out
|
wallow_out
|
);
|
);
|
|
|
parameter ADDR_LENGTH = 7 ;
|
parameter ADDR_LENGTH = 7 ;
|
|
|
// independent clock inputs - rclock_in = read clock, wclock_in = write clock
|
// independent clock inputs - rclock_in = read clock, wclock_in = write clock
|
input rclock_in, wclock_in;
|
input rclock_in, wclock_in;
|
|
|
// enable inputs - read address changes on rising edge of rclock_in when reads are allowed
|
// enable inputs - read address changes on rising edge of rclock_in when reads are allowed
|
// write address changes on rising edge of wclock_in when writes are allowed
|
// write address changes on rising edge of wclock_in when writes are allowed
|
input renable_in, wenable_in ;
|
input renable_in, wenable_in ;
|
|
|
// reset input
|
// reset input
|
input reset_in;
|
input reset_in;
|
|
|
// flush input
|
// flush input
|
// input flush_in ; // not used
|
// input flush_in ; // not used
|
|
|
// almost full and empy status outputs
|
// almost full and empy status outputs
|
output almost_full_out ;
|
output almost_full_out ;
|
|
|
// full and empty status outputs
|
// full and empty status outputs
|
output full_out, empty_out;
|
output full_out, empty_out;
|
|
|
// read and write addresses outputs
|
// read and write addresses outputs
|
output [(ADDR_LENGTH - 1):0] waddr_out, raddr_out;
|
output [(ADDR_LENGTH - 1):0] waddr_out, raddr_out;
|
|
|
// read and write allow outputs
|
// read and write allow outputs
|
output rallow_out, wallow_out ;
|
output rallow_out, wallow_out ;
|
|
|
// read address register
|
// read address register
|
reg [(ADDR_LENGTH - 1):0] raddr ;
|
reg [(ADDR_LENGTH - 1):0] raddr ;
|
|
|
// write address register
|
// write address register
|
reg [(ADDR_LENGTH - 1):0] waddr;
|
reg [(ADDR_LENGTH - 1):0] waddr;
|
assign waddr_out = waddr ;
|
assign waddr_out = waddr ;
|
|
|
// grey code registers
|
// grey code registers
|
// grey code register for next write address
|
// grey code register for next write address
|
reg [(ADDR_LENGTH - 1):0] wgrey_next ; // next
|
reg [(ADDR_LENGTH - 1):0] wgrey_next ; // next
|
|
|
// next write gray address calculation - bitwise xor between address and shifted address
|
// next write gray address calculation - bitwise xor between address and shifted address
|
wire [(ADDR_LENGTH - 2):0] calc_wgrey_next = waddr[(ADDR_LENGTH - 1):1] ^ waddr[(ADDR_LENGTH - 2):0] ;
|
wire [(ADDR_LENGTH - 2):0] calc_wgrey_next = waddr[(ADDR_LENGTH - 1):1] ^ waddr[(ADDR_LENGTH - 2):0] ;
|
|
|
// grey code pipeline for read address
|
// grey code pipeline for read address
|
reg [(ADDR_LENGTH - 1):0] rgrey_minus1 ; // one before current
|
reg [(ADDR_LENGTH - 1):0] rgrey_minus1 ; // one before current
|
reg [(ADDR_LENGTH - 1):0] rgrey_addr ; // current
|
reg [(ADDR_LENGTH - 1):0] rgrey_addr ; // current
|
reg [(ADDR_LENGTH - 1):0] rgrey_next ; // next
|
reg [(ADDR_LENGTH - 1):0] rgrey_next ; // next
|
|
|
// next read gray address calculation - bitwise xor between address and shifted address
|
// next read gray address calculation - bitwise xor between address and shifted address
|
wire [(ADDR_LENGTH - 2):0] calc_rgrey_next = raddr[(ADDR_LENGTH - 1):1] ^ raddr[(ADDR_LENGTH - 2):0] ;
|
wire [(ADDR_LENGTH - 2):0] calc_rgrey_next = raddr[(ADDR_LENGTH - 1):1] ^ raddr[(ADDR_LENGTH - 2):0] ;
|
|
|
// FFs for registered empty and full flags
|
// FFs for registered empty and full flags
|
wire empty ;
|
wire empty ;
|
wire full ;
|
wire full ;
|
|
|
// almost_full tag
|
// almost_full tag
|
wire almost_full ;
|
wire almost_full ;
|
|
|
// write allow wire - writes are allowed when fifo is not full
|
// write allow wire - writes are allowed when fifo is not full
|
wire wallow = wenable_in && !full ;
|
wire wallow = wenable_in && !full ;
|
|
|
// write allow output assignment
|
// write allow output assignment
|
assign wallow_out = wallow && !full ;
|
assign wallow_out = wallow && !full ;
|
|
|
// read allow wire
|
// read allow wire
|
wire rallow ;
|
wire rallow ;
|
|
|
// full output assignment
|
// full output assignment
|
assign full_out = full ;
|
assign full_out = full ;
|
|
|
// almost full output assignment
|
// almost full output assignment
|
assign almost_full_out = almost_full && !full ;
|
assign almost_full_out = almost_full && !full ;
|
|
|
// clear generation for FFs and registers
|
// clear generation for FFs and registers
|
wire clear = reset_in /*|| flush_in*/ ; // flush not used
|
wire clear = reset_in /*|| flush_in*/ ; // flush not used
|
|
|
assign empty_out = empty ;
|
assign empty_out = empty ;
|
|
|
//rallow generation
|
//rallow generation
|
assign rallow = renable_in && !empty ; // reads allowed if read enable is high and FIFO is not empty
|
assign rallow = renable_in && !empty ; // reads allowed if read enable is high and FIFO is not empty
|
|
|
// rallow output assignment
|
// rallow output assignment
|
assign rallow_out = rallow ;
|
assign rallow_out = rallow ;
|
|
|
// at any clock edge that rallow is high, this register provides next read address, so wait cycles are not necessary
|
// at any clock edge that rallow is high, this register provides next read address, so wait cycles are not necessary
|
// when FIFO is empty, this register provides actual read address, so first location can be read
|
// when FIFO is empty, this register provides actual read address, so first location can be read
|
reg [(ADDR_LENGTH - 1):0] raddr_plus_one ;
|
reg [(ADDR_LENGTH - 1):0] raddr_plus_one ;
|
|
|
// address output mux - when FIFO is empty, current actual address is driven out, when it is non - empty next address is driven out
|
// address output mux - when FIFO is empty, current actual address is driven out, when it is non - empty next address is driven out
|
// done for zero wait state burst
|
// done for zero wait state burst
|
assign raddr_out = rallow ? raddr_plus_one : raddr ;
|
assign raddr_out = rallow ? raddr_plus_one : raddr ;
|
|
|
always@(posedge rclock_in or posedge clear)
|
always@(posedge rclock_in or posedge clear)
|
begin
|
begin
|
if (clear)
|
if (clear)
|
begin
|
begin
|
raddr_plus_one <= #`FF_DELAY 4 ;
|
raddr_plus_one <= #`FF_DELAY 4 ;
|
raddr <= #`FF_DELAY 3 ;
|
raddr <= #`FF_DELAY 3 ;
|
end
|
end
|
else if (rallow)
|
else if (rallow)
|
begin
|
begin
|
raddr_plus_one <= #`FF_DELAY raddr_plus_one + 1'b1 ;
|
raddr_plus_one <= #`FF_DELAY raddr_plus_one + 1'b1 ;
|
raddr <= #`FF_DELAY raddr_plus_one ;
|
raddr <= #`FF_DELAY raddr_plus_one ;
|
end
|
end
|
end
|
end
|
|
|
/*-----------------------------------------------------------------------------------------------
|
/*-----------------------------------------------------------------------------------------------
|
Read address control consists of Read address counter and Grey Address pipeline
|
Read address control consists of Read address counter and Grey Address pipeline
|
There are 3 Grey addresses:
|
There are 3 Grey addresses:
|
- rgrey_minus1 is Grey Code of address one before current address
|
- rgrey_minus1 is Grey Code of address one before current address
|
- rgrey_addr is Grey Code of current read address
|
- rgrey_addr is Grey Code of current read address
|
- rgrey_next is Grey Code of next read address
|
- rgrey_next is Grey Code of next read address
|
--------------------------------------------------------------------------------------------------*/
|
--------------------------------------------------------------------------------------------------*/
|
// grey coded address pipeline for status generation in read clock domain
|
// grey coded address pipeline for status generation in read clock domain
|
always@(posedge rclock_in or posedge clear)
|
always@(posedge rclock_in or posedge clear)
|
begin
|
begin
|
if (clear)
|
if (clear)
|
begin
|
begin
|
// initial value is 0
|
// initial value is 0
|
rgrey_minus1 <= #`FF_DELAY 0 ;
|
rgrey_minus1 <= #`FF_DELAY 0 ;
|
rgrey_addr <= #`FF_DELAY 1 ;
|
rgrey_addr <= #`FF_DELAY 1 ;
|
rgrey_next <= #`FF_DELAY 3 ;
|
rgrey_next <= #`FF_DELAY 3 ;
|
end
|
end
|
else
|
else
|
if (rallow)
|
if (rallow)
|
begin
|
begin
|
rgrey_minus1 <= #`FF_DELAY rgrey_addr ;
|
rgrey_minus1 <= #`FF_DELAY rgrey_addr ;
|
rgrey_addr <= #`FF_DELAY rgrey_next ;
|
rgrey_addr <= #`FF_DELAY rgrey_next ;
|
rgrey_next <= #`FF_DELAY {raddr[ADDR_LENGTH - 1], calc_rgrey_next} ;
|
rgrey_next <= #`FF_DELAY {raddr[ADDR_LENGTH - 1], calc_rgrey_next} ;
|
end
|
end
|
end
|
end
|
|
|
/*--------------------------------------------------------------------------------------------
|
/*--------------------------------------------------------------------------------------------
|
Write address control consists of write address counter and Grey Code Register
|
Write address control consists of write address counter and Grey Code Register
|
----------------------------------------------------------------------------------------------*/
|
----------------------------------------------------------------------------------------------*/
|
// grey coded address pipeline for status generation in write clock domain
|
// grey coded address pipeline for status generation in write clock domain
|
always@(posedge wclock_in or posedge clear)
|
always@(posedge wclock_in or posedge clear)
|
begin
|
begin
|
if (clear)
|
if (clear)
|
begin
|
begin
|
wgrey_next <= #`FF_DELAY 3 ;
|
wgrey_next <= #`FF_DELAY 3 ;
|
end
|
end
|
else
|
else
|
if (wallow)
|
if (wallow)
|
begin
|
begin
|
wgrey_next <= #`FF_DELAY {waddr[(ADDR_LENGTH - 1)], calc_wgrey_next} ;
|
wgrey_next <= #`FF_DELAY {waddr[(ADDR_LENGTH - 1)], calc_wgrey_next} ;
|
end
|
end
|
end
|
end
|
|
|
// write address counter - nothing special - initial value is important though
|
// write address counter - nothing special - initial value is important though
|
always@(posedge wclock_in or posedge clear)
|
always@(posedge wclock_in or posedge clear)
|
begin
|
begin
|
if (clear)
|
if (clear)
|
// initial value 4
|
// initial value 4
|
waddr <= #`FF_DELAY 3 ;
|
waddr <= #`FF_DELAY 3 ;
|
else
|
else
|
if (wallow)
|
if (wallow)
|
waddr <= #`FF_DELAY waddr + 1'b1 ;
|
waddr <= #`FF_DELAY waddr + 1'b1 ;
|
end
|
end
|
|
|
/*------------------------------------------------------------------------------------------------------------------------------
|
/*------------------------------------------------------------------------------------------------------------------------------
|
Full control:
|
Full control:
|
Gray coded read address pointer is synchronized to write clock domain and compared to Gray coded next write address.
|
Gray coded read address pointer is synchronized to write clock domain and compared to Gray coded next write address.
|
If they are equal, fifo is full.
|
If they are equal, fifo is full.
|
|
|
Almost full control:
|
Almost full control:
|
Gray coded address of read address decremented by 1 is synchronized to write clock domain and compared to Gray coded next write
|
Gray coded address of read address decremented by 1 is synchronized to write clock domain and compared to Gray coded next write
|
address. If they are equal, fifo is almost full.
|
address. If they are equal, fifo is almost full.
|
--------------------------------------------------------------------------------------------------------------------------------*/
|
--------------------------------------------------------------------------------------------------------------------------------*/
|
wire [(ADDR_LENGTH - 1):0] wclk_sync_rgrey_addr ;
|
wire [(ADDR_LENGTH - 1):0] wclk_sync_rgrey_addr ;
|
reg [(ADDR_LENGTH - 1):0] wclk_rgrey_addr ;
|
reg [(ADDR_LENGTH - 1):0] wclk_rgrey_addr ;
|
wire [(ADDR_LENGTH - 1):0] wclk_sync_rgrey_minus1 ;
|
wire [(ADDR_LENGTH - 1):0] wclk_sync_rgrey_minus1 ;
|
reg [(ADDR_LENGTH - 1):0] wclk_rgrey_minus1 ;
|
reg [(ADDR_LENGTH - 1):0] wclk_rgrey_minus1 ;
|
|
|
synchronizer_flop #(2 * ADDR_LENGTH) i_synchronizer_reg_rgrey_addr
|
synchronizer_flop #(ADDR_LENGTH, 1) i_synchronizer_reg_rgrey_addr
|
|
(
|
|
.data_in (rgrey_addr),
|
|
.clk_out (wclock_in),
|
|
.sync_data_out (wclk_sync_rgrey_addr),
|
|
.async_reset (clear)
|
|
) ;
|
|
|
|
synchronizer_flop #(ADDR_LENGTH, 0) i_synchronizer_reg_rgrey_minus1
|
(
|
(
|
.data_in ({rgrey_addr, rgrey_minus1}),
|
.data_in (rgrey_minus1),
|
.clk_out (wclock_in),
|
.clk_out (wclock_in),
|
.sync_data_out ({wclk_sync_rgrey_addr, wclk_sync_rgrey_minus1}),
|
.sync_data_out (wclk_sync_rgrey_minus1),
|
.async_reset (1'b0)
|
.async_reset (clear)
|
) ;
|
) ;
|
|
|
always@(posedge wclock_in)
|
always@(posedge wclock_in or posedge clear)
|
|
begin
|
|
if (clear)
|
|
begin
|
|
wclk_rgrey_addr <= #`FF_DELAY 1 ;
|
|
wclk_rgrey_minus1 <= #`FF_DELAY 0 ;
|
|
end
|
|
else
|
begin
|
begin
|
wclk_rgrey_addr <= #`FF_DELAY wclk_sync_rgrey_addr ;
|
wclk_rgrey_addr <= #`FF_DELAY wclk_sync_rgrey_addr ;
|
wclk_rgrey_minus1 <= #`FF_DELAY wclk_sync_rgrey_minus1 ;
|
wclk_rgrey_minus1 <= #`FF_DELAY wclk_sync_rgrey_minus1 ;
|
end
|
end
|
|
end
|
|
|
assign full = (wgrey_next == wclk_rgrey_addr) ;
|
assign full = (wgrey_next == wclk_rgrey_addr) ;
|
assign almost_full = (wgrey_next == wclk_rgrey_minus1) ;
|
assign almost_full = (wgrey_next == wclk_rgrey_minus1) ;
|
|
|
/*------------------------------------------------------------------------------------------------------------------------------
|
/*------------------------------------------------------------------------------------------------------------------------------
|
Empty control:
|
Empty control:
|
Gray coded address of next write address is synchronized to read clock domain and compared to Gray coded next read address.
|
Gray coded address of next write address is synchronized to read clock domain and compared to Gray coded next read address.
|
If they are equal, fifo is empty.
|
If they are equal, fifo is empty.
|
--------------------------------------------------------------------------------------------------------------------------------*/
|
--------------------------------------------------------------------------------------------------------------------------------*/
|
wire [(ADDR_LENGTH - 1):0] rclk_sync_wgrey_next ;
|
wire [(ADDR_LENGTH - 1):0] rclk_sync_wgrey_next ;
|
reg [(ADDR_LENGTH - 1):0] rclk_wgrey_next ;
|
reg [(ADDR_LENGTH - 1):0] rclk_wgrey_next ;
|
synchronizer_flop #(ADDR_LENGTH) i_synchronizer_reg_wgrey_next
|
synchronizer_flop #(ADDR_LENGTH, 3) i_synchronizer_reg_wgrey_next
|
(
|
(
|
.data_in (wgrey_next),
|
.data_in (wgrey_next),
|
.clk_out (rclock_in),
|
.clk_out (rclock_in),
|
.sync_data_out (rclk_sync_wgrey_next),
|
.sync_data_out (rclk_sync_wgrey_next),
|
.async_reset (1'b0)
|
.async_reset (clear)
|
) ;
|
) ;
|
|
|
always@(posedge rclock_in)
|
always@(posedge rclock_in or posedge clear)
|
begin
|
begin
|
|
if (clear)
|
|
rclk_wgrey_next <= #`FF_DELAY 3 ;
|
|
else
|
rclk_wgrey_next <= #`FF_DELAY rclk_sync_wgrey_next ;
|
rclk_wgrey_next <= #`FF_DELAY rclk_sync_wgrey_next ;
|
end
|
end
|
|
|
assign empty = (rgrey_next == rclk_wgrey_next) ;
|
assign empty = (rgrey_next == rclk_wgrey_next) ;
|
|
|
endmodule
|
endmodule
|
|
|
