///////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////
|
//
|
//
|
// Filename: rtcclock.v
|
// Filename: rtcclock.v
|
//
|
//
|
// Project: A Wishbone Controlled Real--time Clock Core
|
// Project: A Wishbone Controlled Real--time Clock Core
|
//
|
//
|
// Purpose: Implement a real time clock, including alarm, count--down
|
// Purpose: Implement a real time clock, including alarm, count--down
|
// timer, stopwatch, variable time frequency, and more.
|
// timer, stopwatch, variable time frequency, and more.
|
//
|
//
|
//
|
//
|
// Creator: Dan Gisselquist, Ph.D.
|
// Creator: Dan Gisselquist, Ph.D.
|
// Gisselquist Tecnology, LLC
|
// Gisselquist Technology, LLC
|
//
|
//
|
///////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////
|
//
|
//
|
// Copyright (C) 2015, Gisselquist Technology, LLC
|
// Copyright (C) 2015, Gisselquist Technology, LLC
|
//
|
//
|
// This program is free software (firmware): you can redistribute it and/or
|
// This program is free software (firmware): you can redistribute it and/or
|
// modify it under the terms of the GNU General Public License as published
|
// modify it under the terms of the GNU General Public License as published
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// your option) any later version.
|
// your option) any later version.
|
//
|
//
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// for more details.
|
// for more details.
|
//
|
//
|
// You should have received a copy of the GNU General Public License along
|
// You should have received a copy of the GNU General Public License along
|
// with this program. (It's in the $(ROOT)/doc directory. Run make with no
|
// with this program. (It's in the $(ROOT)/doc directory. Run make with no
|
// target there if the PDF file isn't present.) If not, see
|
// target there if the PDF file isn't present.) If not, see
|
// <http://www.gnu.org/licenses/> for a copy.
|
// <http://www.gnu.org/licenses/> for a copy.
|
//
|
//
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// http://www.gnu.org/licenses/gpl.html
|
// http://www.gnu.org/licenses/gpl.html
|
//
|
//
|
//
|
//
|
///////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////
|
module rtcclock(i_clk,
|
module rtcclock(i_clk,
|
// Wishbone interface
|
// Wishbone interface
|
i_wb_cyc, i_wb_stb, i_wb_we, i_wb_addr, i_wb_data,
|
i_wb_cyc, i_wb_stb, i_wb_we, i_wb_addr, i_wb_data,
|
// o_wb_ack, o_wb_stb, o_wb_data, // no reads here
|
// o_wb_ack, o_wb_stb, o_wb_data, // no reads here
|
// // Button inputs
|
// // Button inputs
|
// i_btn,
|
// i_btn,
|
// Output registers
|
// Output registers
|
o_data, // multiplexed based upon i_wb_addr
|
o_data, // multiplexed based upon i_wb_addr
|
// Output controls
|
// Output controls
|
o_sseg, o_led, o_interrupt,
|
o_sseg, o_led, o_interrupt,
|
// A once-per-day strobe on the last clock of the day
|
// A once-per-day strobe on the last clock of the day
|
o_ppd,
|
o_ppd,
|
// Time setting hack(s)
|
// Time setting hack(s)
|
i_hack);
|
i_hack);
|
parameter DEFAULT_SPEED = 32'd2814750; //2af31e = 2^48 / 100e6 MHz
|
parameter DEFAULT_SPEED = 32'd2814750; //2af31e = 2^48 / 100e6 MHz
|
input i_clk;
|
input i_clk;
|
input i_wb_cyc, i_wb_stb, i_wb_we;
|
input i_wb_cyc, i_wb_stb, i_wb_we;
|
input [2:0] i_wb_addr;
|
input [2:0] i_wb_addr;
|
input [31:0] i_wb_data;
|
input [31:0] i_wb_data;
|
// input i_btn;
|
// input i_btn;
|
output reg [31:0] o_data;
|
output reg [31:0] o_data;
|
output reg [31:0] o_sseg;
|
output reg [31:0] o_sseg;
|
output wire [15:0] o_led;
|
output wire [15:0] o_led;
|
output wire o_interrupt, o_ppd;
|
output wire o_interrupt, o_ppd;
|
input i_hack;
|
input i_hack;
|
|
|
reg [31:0] stopwatch, ckspeed;
|
reg [31:0] stopwatch, ckspeed;
|
reg [25:0] clock, timer;
|
reg [25:0] clock, timer;
|
|
|
wire ck_sel, tm_sel, sw_sel, sp_sel, al_sel;
|
wire ck_sel, tm_sel, sw_sel, sp_sel, al_sel;
|
assign ck_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b000));
|
assign ck_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b000));
|
assign tm_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b001));
|
assign tm_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b001));
|
assign sw_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b010));
|
assign sw_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b010));
|
assign al_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b011));
|
assign al_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b011));
|
assign sp_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b100));
|
assign sp_sel = ((i_wb_cyc)&&(i_wb_stb)&&(i_wb_addr[2:0]==3'b100));
|
|
|
reg [39:0] ck_counter;
|
reg [39:0] ck_counter;
|
reg ck_carry;
|
reg ck_carry;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
{ ck_carry, ck_counter } <= ck_counter + { 8'h00, ckspeed };
|
{ ck_carry, ck_counter } <= ck_counter + { 8'h00, ckspeed };
|
|
|
wire ck_pps;
|
wire ck_pps;
|
reg ck_prepps, ck_ppm, ck_pph, ck_ppd;
|
reg ck_prepps, ck_ppm, ck_pph, ck_ppd;
|
reg [7:0] ck_sub;
|
reg [7:0] ck_sub;
|
initial clock = 26'h000000;
|
initial clock = 26'h000000;
|
assign ck_pps = (ck_carry)&&(ck_prepps);
|
assign ck_pps = (ck_carry)&&(ck_prepps);
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
begin
|
begin
|
if (ck_carry)
|
if (ck_carry)
|
ck_sub <= ck_sub + 8'h1;
|
ck_sub <= ck_sub + 8'h1;
|
ck_prepps <= (ck_sub == 8'hff);
|
ck_prepps <= (ck_sub == 8'hff);
|
|
|
if (ck_pps)
|
if (ck_pps)
|
begin // advance the seconds
|
begin // advance the seconds
|
if (clock[3:0] >= 4'h9)
|
if (clock[3:0] >= 4'h9)
|
clock[3:0] <= 4'h0;
|
clock[3:0] <= 4'h0;
|
else
|
else
|
clock[3:0] <= clock[3:0] + 4'h1;
|
clock[3:0] <= clock[3:0] + 4'h1;
|
if (clock[7:0] >= 8'h59)
|
if (clock[7:0] >= 8'h59)
|
clock[7:4] <= 4'h0;
|
clock[7:4] <= 4'h0;
|
else if (clock[3:0] >= 4'h9)
|
else if (clock[3:0] >= 4'h9)
|
clock[7:4] <= clock[7:4] + 4'h1;
|
clock[7:4] <= clock[7:4] + 4'h1;
|
end
|
end
|
ck_ppm <= (clock[7:0] == 8'h59);
|
ck_ppm <= (clock[7:0] == 8'h59);
|
|
|
if ((ck_pps)&&(ck_ppm))
|
if ((ck_pps)&&(ck_ppm))
|
begin // advance the minutes
|
begin // advance the minutes
|
if (clock[11:8] >= 4'h9)
|
if (clock[11:8] >= 4'h9)
|
clock[11:8] <= 4'h0;
|
clock[11:8] <= 4'h0;
|
else
|
else
|
clock[11:8] <= clock[11:8] + 4'h1;
|
clock[11:8] <= clock[11:8] + 4'h1;
|
if (clock[15:8] >= 8'h59)
|
if (clock[15:8] >= 8'h59)
|
clock[15:12] <= 4'h0;
|
clock[15:12] <= 4'h0;
|
else if (clock[11:8] >= 4'h9)
|
else if (clock[11:8] >= 4'h9)
|
clock[15:12] <= clock[15:12] + 4'h1;
|
clock[15:12] <= clock[15:12] + 4'h1;
|
end
|
end
|
ck_pph <= (clock[15:0] == 16'h5959);
|
ck_pph <= (clock[15:0] == 16'h5959);
|
|
|
if ((ck_pps)&&(ck_pph))
|
if ((ck_pps)&&(ck_pph))
|
begin // advance the hours
|
begin // advance the hours
|
if (clock[21:16] >= 6'h23)
|
if (clock[21:16] >= 6'h23)
|
begin
|
begin
|
clock[19:16] <= 4'h0;
|
clock[19:16] <= 4'h0;
|
clock[21:20] <= 2'h0;
|
clock[21:20] <= 2'h0;
|
end else if (clock[19:16] >= 4'h9)
|
end else if (clock[19:16] >= 4'h9)
|
begin
|
begin
|
clock[19:16] <= 4'h0;
|
clock[19:16] <= 4'h0;
|
clock[21:20] <= clock[21:20] + 2'h1;
|
clock[21:20] <= clock[21:20] + 2'h1;
|
end else begin
|
end else begin
|
clock[19:16] <= clock[19:16] + 4'h1;
|
clock[19:16] <= clock[19:16] + 4'h1;
|
end
|
end
|
end
|
end
|
ck_ppd <= (clock[21:0] == 22'h235959);
|
ck_ppd <= (clock[21:0] == 22'h235959);
|
|
|
|
|
if ((ck_sel)&&(i_wb_we))
|
if ((ck_sel)&&(i_wb_we))
|
begin
|
begin
|
if (8'hff != i_wb_data[7:0])
|
if (8'hff != i_wb_data[7:0])
|
begin
|
begin
|
clock[7:0] <= i_wb_data[7:0];
|
clock[7:0] <= i_wb_data[7:0];
|
ck_ppm <= (i_wb_data[7:0] == 8'h59);
|
ck_ppm <= (i_wb_data[7:0] == 8'h59);
|
end
|
end
|
if (8'hff != i_wb_data[15:8])
|
if (8'hff != i_wb_data[15:8])
|
begin
|
begin
|
clock[15:8] <= i_wb_data[15:8];
|
clock[15:8] <= i_wb_data[15:8];
|
ck_pph <= (i_wb_data[15:8] == 8'h59);
|
ck_pph <= (i_wb_data[15:8] == 8'h59);
|
end
|
end
|
if (6'h3f != i_wb_data[21:16])
|
if (6'h3f != i_wb_data[21:16])
|
clock[21:16] <= i_wb_data[21:16];
|
clock[21:16] <= i_wb_data[21:16];
|
clock[25:22] <= i_wb_data[25:22];
|
clock[25:22] <= i_wb_data[25:22];
|
if (8'h00 == i_wb_data[7:0])
|
if (8'h00 == i_wb_data[7:0])
|
ck_sub <= 8'h00;
|
ck_sub <= 8'h00;
|
end
|
end
|
end
|
end
|
|
|
// Clock updates take several clocks, so let's make sure we
|
// Clock updates take several clocks, so let's make sure we
|
// are only looking at a valid clock value before testing it.
|
// are only looking at a valid clock value before testing it.
|
reg [21:0] ck_last_clock;
|
reg [21:0] ck_last_clock;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
ck_last_clock <= clock[21:0];
|
ck_last_clock <= clock[21:0];
|
|
|
|
|
reg tm_pps, tm_ppm, tm_int;
|
reg tm_pps, tm_ppm, tm_int;
|
wire tm_stopped, tm_running, tm_alarm;
|
wire tm_stopped, tm_running, tm_alarm;
|
assign tm_stopped = ~timer[24];
|
assign tm_stopped = ~timer[24];
|
assign tm_running = timer[24];
|
assign tm_running = timer[24];
|
assign tm_alarm = timer[25];
|
assign tm_alarm = timer[25];
|
reg [23:0] tm_start;
|
reg [23:0] tm_start;
|
reg [7:0] tm_sub;
|
reg [7:0] tm_sub;
|
initial tm_start = 24'h00;
|
initial tm_start = 24'h00;
|
initial timer = 26'h00;
|
initial timer = 26'h00;
|
initial tm_int = 1'b0;
|
initial tm_int = 1'b0;
|
initial tm_pps = 1'b0;
|
initial tm_pps = 1'b0;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
begin
|
begin
|
if (ck_carry)
|
if (ck_carry)
|
begin
|
begin
|
tm_sub <= tm_sub + 8'h1;
|
tm_sub <= tm_sub + 8'h1;
|
tm_pps <= (tm_sub == 8'hff);
|
tm_pps <= (tm_sub == 8'hff);
|
end else
|
end else
|
tm_pps <= 1'b0;
|
tm_pps <= 1'b0;
|
|
|
if ((~tm_alarm)&&(tm_running)&&(tm_pps))
|
if ((~tm_alarm)&&(tm_running)&&(tm_pps))
|
begin // If we are running ...
|
begin // If we are running ...
|
timer[25] <= 1'b0;
|
timer[25] <= 1'b0;
|
if (timer[23:0] == 24'h00)
|
if (timer[23:0] == 24'h00)
|
timer[25] <= 1'b1;
|
timer[25] <= 1'b1;
|
else if (timer[3:0] != 4'h0)
|
else if (timer[3:0] != 4'h0)
|
timer[3:0] <= timer[3:0]-4'h1;
|
timer[3:0] <= timer[3:0]-4'h1;
|
else begin // last digit is a zero
|
else begin // last digit is a zero
|
timer[3:0] <= 4'h9;
|
timer[3:0] <= 4'h9;
|
if (timer[7:4] != 4'h0)
|
if (timer[7:4] != 4'h0)
|
timer[7:4] <= timer[7:4]-4'h1;
|
timer[7:4] <= timer[7:4]-4'h1;
|
else begin // last two digits are zero
|
else begin // last two digits are zero
|
timer[7:4] <= 4'h5;
|
timer[7:4] <= 4'h5;
|
if (timer[11:8] != 4'h0)
|
if (timer[11:8] != 4'h0)
|
timer[11:8] <= timer[11:8]-4'h1;
|
timer[11:8] <= timer[11:8]-4'h1;
|
else begin // last three digits are zero
|
else begin // last three digits are zero
|
timer[11:8] <= 4'h9;
|
timer[11:8] <= 4'h9;
|
if (timer[15:12] != 4'h0)
|
if (timer[15:12] != 4'h0)
|
timer[15:12] <= timer[15:12]-4'h1;
|
timer[15:12] <= timer[15:12]-4'h1;
|
else begin
|
else begin
|
timer[15:12] <= 4'h5;
|
timer[15:12] <= 4'h5;
|
if (timer[19:16] != 4'h0)
|
if (timer[19:16] != 4'h0)
|
timer[19:16] <= timer[19:16]-4'h1;
|
timer[19:16] <= timer[19:16]-4'h1;
|
else begin
|
else begin
|
//
|
//
|
timer[19:16] <= 4'h9;
|
timer[19:16] <= 4'h9;
|
timer[23:20] <= timer[23:20]-4'h1;
|
timer[23:20] <= timer[23:20]-4'h1;
|
end
|
end
|
end
|
end
|
end
|
end
|
end
|
end
|
end
|
end
|
end
|
end
|
|
|
if((~tm_alarm)&&(tm_running))
|
if((~tm_alarm)&&(tm_running))
|
begin
|
begin
|
timer[25] <= (timer[23:0] == 24'h00);
|
timer[25] <= (timer[23:0] == 24'h00);
|
tm_int <= (timer[23:0] == 24'h00);
|
tm_int <= (timer[23:0] == 24'h00);
|
end else tm_int <= 1'b0;
|
end else tm_int <= 1'b0;
|
if (tm_alarm)
|
if (tm_alarm)
|
timer[24] <= 1'b0;
|
timer[24] <= 1'b0;
|
|
|
if ((tm_sel)&&(i_wb_we)&&(tm_running)) // Writes while running
|
if ((tm_sel)&&(i_wb_we)&&(tm_running)) // Writes while running
|
// Only allowed to stop the timer, nothing more
|
// Only allowed to stop the timer, nothing more
|
timer[24] <= i_wb_data[24];
|
timer[24] <= i_wb_data[24];
|
else if ((tm_sel)&&(i_wb_we)&&(tm_stopped)) // Writes while off
|
else if ((tm_sel)&&(i_wb_we)&&(tm_stopped)) // Writes while off
|
begin
|
begin
|
timer[24] <= i_wb_data[24];
|
timer[24] <= i_wb_data[24];
|
if ((timer[24])||(i_wb_data[24]))
|
if ((timer[24])||(i_wb_data[24]))
|
timer[25] <= 1'b0;
|
timer[25] <= 1'b0;
|
if (i_wb_data[23:0] != 24'h0000)
|
if (i_wb_data[23:0] != 24'h0000)
|
begin
|
begin
|
timer[23:0] <= i_wb_data[23:0];
|
timer[23:0] <= i_wb_data[23:0];
|
tm_start <= i_wb_data[23:0];
|
tm_start <= i_wb_data[23:0];
|
tm_sub <= 8'h00;
|
tm_sub <= 8'h00;
|
end else if (timer[23:0] == 24'h00)
|
end else if (timer[23:0] == 24'h00)
|
begin // Resetting timer to last valid timer start val
|
begin // Resetting timer to last valid timer start val
|
timer[23:0] <= tm_start;
|
timer[23:0] <= tm_start;
|
tm_sub <= 8'h00;
|
tm_sub <= 8'h00;
|
end
|
end
|
// Any write clears the alarm
|
// Any write clears the alarm
|
timer[25] <= 1'b0;
|
timer[25] <= 1'b0;
|
end
|
end
|
end
|
end
|
|
|
//
|
//
|
// Stopwatch functionality
|
// Stopwatch functionality
|
//
|
//
|
// Setting bit '0' starts the stop watch, clearing it stops it.
|
// Setting bit '0' starts the stop watch, clearing it stops it.
|
// Writing to the register with bit '1' high will clear the stopwatch,
|
// Writing to the register with bit '1' high will clear the stopwatch,
|
// and return it to zero provided that the stopwatch is stopped either
|
// and return it to zero provided that the stopwatch is stopped either
|
// before or after the write. Hence, writing a '2' to the device
|
// before or after the write. Hence, writing a '2' to the device
|
// will always stop and clear it, whereas writing a '3' to the device
|
// will always stop and clear it, whereas writing a '3' to the device
|
// will only clear it if it was already stopped.
|
// will only clear it if it was already stopped.
|
reg sw_pps, sw_ppm, sw_pph;
|
reg sw_pps, sw_ppm, sw_pph;
|
reg [7:0] sw_sub;
|
reg [7:0] sw_sub;
|
wire sw_running;
|
wire sw_running;
|
assign sw_running = stopwatch[0];
|
assign sw_running = stopwatch[0];
|
initial stopwatch = 32'h00000;
|
initial stopwatch = 32'h00000;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
begin
|
begin
|
sw_pps <= 1'b0;
|
sw_pps <= 1'b0;
|
if (sw_running)
|
if (sw_running)
|
begin
|
begin
|
if (ck_carry)
|
if (ck_carry)
|
begin
|
begin
|
sw_sub <= sw_sub + 8'h1;
|
sw_sub <= sw_sub + 8'h1;
|
sw_pps <= (sw_sub == 8'hff);
|
sw_pps <= (sw_sub == 8'hff);
|
end
|
end
|
end
|
end
|
|
|
stopwatch[7:1] <= sw_sub[7:1];
|
stopwatch[7:1] <= sw_sub[7:1];
|
|
|
if (sw_pps)
|
if (sw_pps)
|
begin // Second hand
|
begin // Second hand
|
if (stopwatch[11:8] >= 4'h9)
|
if (stopwatch[11:8] >= 4'h9)
|
stopwatch[11:8] <= 4'h0;
|
stopwatch[11:8] <= 4'h0;
|
else
|
else
|
stopwatch[11:8] <= stopwatch[11:8] + 4'h1;
|
stopwatch[11:8] <= stopwatch[11:8] + 4'h1;
|
|
|
if (stopwatch[15:8] >= 8'h59)
|
if (stopwatch[15:8] >= 8'h59)
|
stopwatch[15:12] <= 4'h0;
|
stopwatch[15:12] <= 4'h0;
|
else if (stopwatch[11:8] >= 4'h9)
|
else if (stopwatch[11:8] >= 4'h9)
|
stopwatch[15:12] <= stopwatch[15:12] + 4'h1;
|
stopwatch[15:12] <= stopwatch[15:12] + 4'h1;
|
sw_ppm <= (stopwatch[15:8] == 8'h59);
|
sw_ppm <= (stopwatch[15:8] == 8'h59);
|
end else sw_ppm <= 1'b0;
|
end else sw_ppm <= 1'b0;
|
|
|
if (sw_ppm)
|
if (sw_ppm)
|
begin // Minutes
|
begin // Minutes
|
if (stopwatch[19:16] >= 4'h9)
|
if (stopwatch[19:16] >= 4'h9)
|
stopwatch[19:16] <= 4'h0;
|
stopwatch[19:16] <= 4'h0;
|
else
|
else
|
stopwatch[19:16] <= stopwatch[19:16]+4'h1;
|
stopwatch[19:16] <= stopwatch[19:16]+4'h1;
|
|
|
if (stopwatch[23:16] >= 8'h59)
|
if (stopwatch[23:16] >= 8'h59)
|
stopwatch[23:20] <= 4'h0;
|
stopwatch[23:20] <= 4'h0;
|
else if (stopwatch[19:16] >= 4'h9)
|
else if (stopwatch[19:16] >= 4'h9)
|
stopwatch[23:20] <= stopwatch[23:20]+4'h1;
|
stopwatch[23:20] <= stopwatch[23:20]+4'h1;
|
sw_pph <= (stopwatch[23:16] == 8'h59);
|
sw_pph <= (stopwatch[23:16] == 8'h59);
|
end else sw_pph <= 1'b0;
|
end else sw_pph <= 1'b0;
|
|
|
if (sw_pph)
|
if (sw_pph)
|
begin // And hours
|
begin // And hours
|
if (stopwatch[27:24] >= 4'h9)
|
if (stopwatch[27:24] >= 4'h9)
|
stopwatch[27:24] <= 4'h0;
|
stopwatch[27:24] <= 4'h0;
|
else
|
else
|
stopwatch[27:24] <= stopwatch[27:24]+4'h1;
|
stopwatch[27:24] <= stopwatch[27:24]+4'h1;
|
|
|
if((stopwatch[27:24] >= 4'h9)&&(stopwatch[31:28] < 4'hf))
|
if((stopwatch[27:24] >= 4'h9)&&(stopwatch[31:28] < 4'hf))
|
stopwatch[31:28] <= stopwatch[27:24]+4'h1;
|
stopwatch[31:28] <= stopwatch[27:24]+4'h1;
|
end
|
end
|
|
|
if ((sw_sel)&&(i_wb_we))
|
if ((sw_sel)&&(i_wb_we))
|
begin
|
begin
|
stopwatch[0] <= i_wb_data[0];
|
stopwatch[0] <= i_wb_data[0];
|
if((i_wb_data[1])&&((~stopwatch[0])||(~i_wb_data[0])))
|
if((i_wb_data[1])&&((~stopwatch[0])||(~i_wb_data[0])))
|
begin
|
begin
|
stopwatch[31:1] <= 31'h00;
|
stopwatch[31:1] <= 31'h00;
|
sw_sub <= 8'h00;
|
sw_sub <= 8'h00;
|
sw_pps <= 1'b0;
|
sw_pps <= 1'b0;
|
sw_ppm <= 1'b0;
|
sw_ppm <= 1'b0;
|
sw_pph <= 1'b0;
|
sw_pph <= 1'b0;
|
end
|
end
|
end
|
end
|
end
|
end
|
|
|
//
|
//
|
// The alarm code
|
// The alarm code
|
//
|
//
|
// Set the alarm register to the time you wish the board to "alarm".
|
// Set the alarm register to the time you wish the board to "alarm".
|
// The "alarm" will take place once per day at that time. At that
|
// The "alarm" will take place once per day at that time. At that
|
// time, the RTC code will generate a clock interrupt, and the CPU/host
|
// time, the RTC code will generate a clock interrupt, and the CPU/host
|
// can come and see that the alarm tripped.
|
// can come and see that the alarm tripped.
|
//
|
//
|
//
|
//
|
reg [21:0] alarm_time;
|
reg [21:0] alarm_time;
|
reg al_int, // The alarm interrupt line
|
reg al_int, // The alarm interrupt line
|
al_enabled, // Whether the alarm is enabled
|
al_enabled, // Whether the alarm is enabled
|
al_tripped; // Whether the alarm has tripped
|
al_tripped; // Whether the alarm has tripped
|
initial al_enabled= 1'b0;
|
initial al_enabled= 1'b0;
|
initial al_tripped= 1'b0;
|
initial al_tripped= 1'b0;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
begin
|
begin
|
if ((al_sel)&&(i_wb_we))
|
if ((al_sel)&&(i_wb_we))
|
begin
|
begin
|
// Only adjust the alarm hours if the requested hours
|
// Only adjust the alarm hours if the requested hours
|
// are valid. This allows writes to the register,
|
// are valid. This allows writes to the register,
|
// without a prior read, to leave these configuration
|
// without a prior read, to leave these configuration
|
// bits alone.
|
// bits alone.
|
if (i_wb_data[21:16] != 6'h3f)
|
if (i_wb_data[21:16] != 6'h3f)
|
alarm_time[21:16] <= i_wb_data[21:16];
|
alarm_time[21:16] <= i_wb_data[21:16];
|
// Here's the same thing for the minutes: only adjust
|
// Here's the same thing for the minutes: only adjust
|
// the alarm minutes if the new bits are not all 1's.
|
// the alarm minutes if the new bits are not all 1's.
|
if (i_wb_data[15:8] != 8'hff)
|
if (i_wb_data[15:8] != 8'hff)
|
alarm_time[15:8] <= i_wb_data[15:8];
|
alarm_time[15:8] <= i_wb_data[15:8];
|
// Here's the same thing for the seconds: only adjust
|
// Here's the same thing for the seconds: only adjust
|
// the alarm minutes if the new bits are not all 1's.
|
// the alarm minutes if the new bits are not all 1's.
|
if (i_wb_data[7:0] != 8'hff)
|
if (i_wb_data[7:0] != 8'hff)
|
alarm_time[7:0] <= i_wb_data[7:0];
|
alarm_time[7:0] <= i_wb_data[7:0];
|
al_enabled <= i_wb_data[24];
|
al_enabled <= i_wb_data[24];
|
// Reset the alarm if a '1' is written to the tripped
|
// Reset the alarm if a '1' is written to the tripped
|
// register, or if the alarm is disabled.
|
// register, or if the alarm is disabled.
|
if ((i_wb_data[25])||(~i_wb_data[24]))
|
if ((i_wb_data[25])||(~i_wb_data[24]))
|
al_tripped <= 1'b0;
|
al_tripped <= 1'b0;
|
end
|
end
|
|
|
al_int <= 1'b0;
|
al_int <= 1'b0;
|
if ((ck_last_clock != alarm_time)&&(clock[21:0] == alarm_time)
|
if ((ck_last_clock != alarm_time)&&(clock[21:0] == alarm_time)
|
&&(al_enabled))
|
&&(al_enabled))
|
begin
|
begin
|
al_tripped <= 1'b1;
|
al_tripped <= 1'b1;
|
al_int <= 1'b1;
|
al_int <= 1'b1;
|
end
|
end
|
end
|
end
|
|
|
//
|
//
|
// The ckspeed register is equal to 2^48 divded by the number of
|
// The ckspeed register is equal to 2^48 divded by the number of
|
// clock ticks you expect per second. Adjust high for a slower
|
// clock ticks you expect per second. Adjust high for a slower
|
// clock, lower for a faster clock. In this fashion, a single
|
// clock, lower for a faster clock. In this fashion, a single
|
// real time clock RTL file can handle tracking the clock in any
|
// real time clock RTL file can handle tracking the clock in any
|
// device. Further, because this is only the lower 32 bits of a
|
// device. Further, because this is only the lower 32 bits of a
|
// 48 bit counter per seconds, the clock jitter is kept below
|
// 48 bit counter per seconds, the clock jitter is kept below
|
// 1 part in 65 thousand.
|
// 1 part in 65 thousand.
|
//
|
//
|
initial ckspeed = DEFAULT_SPEED;
|
initial ckspeed = DEFAULT_SPEED;
|
// In the case of verilator, comment the above and uncomment the line
|
// In the case of verilator, comment the above and uncomment the line
|
// below. The clock constant below is "close" to simulation time,
|
// below. The clock constant below is "close" to simulation time,
|
// meaning that my verilator simulation is running about 300x slower
|
// meaning that my verilator simulation is running about 300x slower
|
// than board time.
|
// than board time.
|
// initial ckspeed = 32'd786432000;
|
// initial ckspeed = 32'd786432000;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if ((sp_sel)&&(i_wb_we))
|
if ((sp_sel)&&(i_wb_we))
|
ckspeed <= i_wb_data;
|
ckspeed <= i_wb_data;
|
|
|
//
|
//
|
// If you want very fine precision control over your clock, you need
|
// If you want very fine precision control over your clock, you need
|
// to be able to transfer time from one location to another. This
|
// to be able to transfer time from one location to another. This
|
// is the beginning of that means: by setting a wire, i_hack, high
|
// is the beginning of that means: by setting a wire, i_hack, high
|
// on a particular input, you can then read (later) what the clock
|
// on a particular input, you can then read (later) what the clock
|
// time was on that input.
|
// time was on that input.
|
//
|
//
|
// What's missing from this high precision adjustment mechanism is a
|
// What's missing from this high precision adjustment mechanism is a
|
// means of actually adjusting this time based upon the time
|
// means of actually adjusting this time based upon the time
|
// difference you measure here between the hack time and some time
|
// difference you measure here between the hack time and some time
|
// on another clock, but we'll get there.
|
// on another clock, but we'll get there.
|
//
|
//
|
reg r_hack_carry;
|
reg r_hack_carry;
|
reg [29:0] hack_time;
|
reg [29:0] hack_time;
|
reg [39:0] hack_counter;
|
reg [39:0] hack_counter;
|
initial hack_time = 30'h0000;
|
initial hack_time = 30'h0000;
|
initial hack_counter = 40'h0000;
|
initial hack_counter = 40'h0000;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (i_hack)
|
if (i_hack)
|
begin
|
begin
|
hack_time <= { clock[21:0], ck_sub };
|
hack_time <= { clock[21:0], ck_sub };
|
hack_counter <= ck_counter;
|
hack_counter <= ck_counter;
|
r_hack_carry <= ck_carry;
|
r_hack_carry <= ck_carry;
|
// if ck_carry is set, the clock register is in the
|
// if ck_carry is set, the clock register is in the
|
// middle of a two clock update. In that case ....
|
// middle of a two clock update. In that case ....
|
end else if (r_hack_carry)
|
end else if (r_hack_carry)
|
begin // update again on the next clock to get the correct
|
begin // update again on the next clock to get the correct
|
// hack time.
|
// hack time.
|
hack_time <= { clock[21:0], ck_sub };
|
hack_time <= { clock[21:0], ck_sub };
|
r_hack_carry <= 1'b0;
|
r_hack_carry <= 1'b0;
|
end
|
end
|
|
|
reg [15:0] h_sseg;
|
reg [15:0] h_sseg;
|
reg [3:1] dmask;
|
reg [3:1] dmask;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
case(clock[25:24])
|
case(clock[25:24])
|
2'h1: begin h_sseg <= timer[15:0];
|
2'h1: begin h_sseg <= timer[15:0];
|
if (tm_alarm) dmask <= 3'h7;
|
if (tm_alarm) dmask <= 3'h7;
|
else begin
|
else begin
|
dmask[3] <= (12'h000 != timer[23:12]); // timer[15:12]
|
dmask[3] <= (12'h000 != timer[23:12]); // timer[15:12]
|
dmask[2] <= (16'h000 != timer[23: 8]); // timer[11: 8]
|
dmask[2] <= (16'h000 != timer[23: 8]); // timer[11: 8]
|
dmask[1] <= (20'h000 != timer[23: 4]); // timer[ 7: 4]
|
dmask[1] <= (20'h000 != timer[23: 4]); // timer[ 7: 4]
|
// dmask[0] <= 1'b1; // Always on
|
// dmask[0] <= 1'b1; // Always on
|
end end
|
end end
|
2'h2: begin h_sseg <= stopwatch[19:4];
|
2'h2: begin h_sseg <= stopwatch[19:4];
|
dmask[3] <= (12'h00 != stopwatch[27:16]);
|
dmask[3] <= (12'h00 != stopwatch[27:16]);
|
dmask[2] <= (16'h000 != stopwatch[27:12]);
|
dmask[2] <= (16'h000 != stopwatch[27:12]);
|
dmask[1] <= 1'b1; // Always on, stopwatch[11:8]
|
dmask[1] <= 1'b1; // Always on, stopwatch[11:8]
|
// dmask[0] <= 1'b1; // Always on, stopwatch[7:4]
|
// dmask[0] <= 1'b1; // Always on, stopwatch[7:4]
|
end
|
end
|
2'h3: begin h_sseg <= ck_last_clock[15:0];
|
2'h3: begin h_sseg <= ck_last_clock[15:0];
|
dmask[3:1] <= 3'h7;
|
dmask[3:1] <= 3'h7;
|
end
|
end
|
default: begin // 4'h0
|
default: begin // 4'h0
|
h_sseg <= { 2'b00, ck_last_clock[21:8] };
|
h_sseg <= { 2'b00, ck_last_clock[21:8] };
|
dmask[2:1] <= 2'b11;
|
dmask[2:1] <= 2'b11;
|
dmask[3] <= (2'b00 != ck_last_clock[21:20]);
|
dmask[3] <= (2'b00 != ck_last_clock[21:20]);
|
end
|
end
|
endcase
|
endcase
|
|
|
wire [31:0] w_sseg;
|
wire [31:0] w_sseg;
|
assign w_sseg[ 0] = (~ck_sub[7]);
|
assign w_sseg[ 0] = (~ck_sub[7]);
|
assign w_sseg[ 8] = (clock[25:24] == 2'h2);
|
assign w_sseg[ 8] = (clock[25:24] == 2'h2);
|
assign w_sseg[16] = ((clock[25:24] == 2'h0)&&(~ck_sub[7]))||(clock[25:24] == 2'h3);
|
assign w_sseg[16] = ((clock[25:24] == 2'h0)&&(~ck_sub[7]))||(clock[25:24] == 2'h3);
|
assign w_sseg[24] = 1'b0;
|
assign w_sseg[24] = 1'b0;
|
hexmap ha(i_clk, h_sseg[ 3: 0], w_sseg[ 7: 1]);
|
hexmap ha(i_clk, h_sseg[ 3: 0], w_sseg[ 7: 1]);
|
hexmap hb(i_clk, h_sseg[ 7: 4], w_sseg[15: 9]);
|
hexmap hb(i_clk, h_sseg[ 7: 4], w_sseg[15: 9]);
|
hexmap hc(i_clk, h_sseg[11: 8], w_sseg[23:17]);
|
hexmap hc(i_clk, h_sseg[11: 8], w_sseg[23:17]);
|
hexmap hd(i_clk, h_sseg[15:12], w_sseg[31:25]);
|
hexmap hd(i_clk, h_sseg[15:12], w_sseg[31:25]);
|
|
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if ((tm_alarm || al_tripped)&&(ck_sub[7]))
|
if ((tm_alarm || al_tripped)&&(ck_sub[7]))
|
o_sseg <= 32'h0000;
|
o_sseg <= 32'h0000;
|
else
|
else
|
o_sseg <= {
|
o_sseg <= {
|
(dmask[3])?w_sseg[31:24]:8'h00,
|
(dmask[3])?w_sseg[31:24]:8'h00,
|
(dmask[2])?w_sseg[23:16]:8'h00,
|
(dmask[2])?w_sseg[23:16]:8'h00,
|
(dmask[1])?w_sseg[15: 8]:8'h00,
|
(dmask[1])?w_sseg[15: 8]:8'h00,
|
w_sseg[ 7: 0] };
|
w_sseg[ 7: 0] };
|
|
|
reg [17:0] ledreg;
|
reg [17:0] ledreg;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if ((ck_pps)&&(ck_ppm))
|
if ((ck_pps)&&(ck_ppm))
|
ledreg <= 18'h00;
|
ledreg <= 18'h00;
|
else if (ck_carry)
|
else if (ck_carry)
|
ledreg <= ledreg + 18'h11;
|
ledreg <= ledreg + 18'h11;
|
assign o_led = (tm_alarm||al_tripped)?{ (16){ck_sub[7]}}:
|
assign o_led = (tm_alarm||al_tripped)?{ (16){ck_sub[7]}}:
|
{ ledreg[17:10],
|
{ ledreg[17:10],
|
ledreg[10], ledreg[11], ledreg[12], ledreg[13],
|
ledreg[10], ledreg[11], ledreg[12], ledreg[13],
|
ledreg[14], ledreg[15], ledreg[16], ledreg[17] };
|
ledreg[14], ledreg[15], ledreg[16], ledreg[17] };
|
|
|
assign o_interrupt = tm_int || al_int;
|
assign o_interrupt = tm_int || al_int;
|
|
|
// A once-per day strobe, on the last second of the day so that the
|
// A once-per day strobe, on the last second of the day so that the
|
// the next clock is the first clock of the day. This is useful for
|
// the next clock is the first clock of the day. This is useful for
|
// connecting this module to a year/month/date date/calendar module.
|
// connecting this module to a year/month/date date/calendar module.
|
assign o_ppd = (ck_ppd)&&(ck_pps);
|
assign o_ppd = (ck_ppd)&&(ck_pps);
|
|
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
case(i_wb_addr[2:0])
|
case(i_wb_addr[2:0])
|
3'b000: o_data <= { 6'h00, clock[25:22], ck_last_clock };
|
3'b000: o_data <= { 6'h00, clock[25:22], ck_last_clock };
|
3'b001: o_data <= { 6'h00, timer };
|
3'b001: o_data <= { 6'h00, timer };
|
3'b010: o_data <= stopwatch;
|
3'b010: o_data <= stopwatch;
|
3'b011: o_data <= { 6'h00, al_tripped, al_enabled, 2'b00, alarm_time };
|
3'b011: o_data <= { 6'h00, al_tripped, al_enabled, 2'b00, alarm_time };
|
3'b100: o_data <= ckspeed;
|
3'b100: o_data <= ckspeed;
|
3'b101: o_data <= { 2'b00, hack_time };
|
3'b101: o_data <= { 2'b00, hack_time };
|
3'b110: o_data <= hack_counter[39:8];
|
3'b110: o_data <= hack_counter[39:8];
|
3'b111: o_data <= { hack_counter[7:0], 24'h00 };
|
3'b111: o_data <= { hack_counter[7:0], 24'h00 };
|
endcase
|
endcase
|
|
|
endmodule
|
endmodule
|
|
|