/*********************************************************************
|
/*********************************************************************
|
|
|
SDRAM Controller Bank Controller
|
SDRAM Controller Bank Controller
|
|
|
This file is part of the sdram controller project
|
This file is part of the sdram controller project
|
http://www.opencores.org/cores/sdr_ctrl/
|
http://www.opencores.org/cores/sdr_ctrl/
|
|
|
Description:
|
Description:
|
This module takes requests from sdrc_req_gen, checks for page hit/miss and
|
This module takes requests from sdrc_req_gen, checks for page hit/miss and
|
issues precharge/activate commands and then passes the request to sdrc_xfr_ctl.
|
issues precharge/activate commands and then passes the request to sdrc_xfr_ctl.
|
|
|
To Do:
|
To Do:
|
nothing
|
nothing
|
|
|
Author(s):
|
Author(s):
|
- Dinesh Annayya, dinesha@opencores.org
|
- Dinesh Annayya, dinesha@opencores.org
|
Version : 1.0 - 8th Jan 2012
|
Version : 1.0 - 8th Jan 2012
|
|
|
|
|
|
|
Copyright (C) 2000 Authors and OPENCORES.ORG
|
Copyright (C) 2000 Authors and OPENCORES.ORG
|
|
|
This source file may be used and distributed without
|
This source file may be used and distributed without
|
restriction provided that this copyright statement is not
|
restriction provided that this copyright statement is not
|
removed from the file and that any derivative work contains
|
removed from the file and that any derivative work contains
|
the original copyright notice and the associated disclaimer.
|
the original copyright notice and the associated disclaimer.
|
|
|
This source file is free software; you can redistribute it
|
This source file is free software; you can redistribute it
|
and/or modify it under the terms of the GNU Lesser General
|
and/or modify it under the terms of the GNU Lesser General
|
Public License as published by the Free Software Foundation;
|
Public License as published by the Free Software Foundation;
|
either version 2.1 of the License, or (at your option) any
|
either version 2.1 of the License, or (at your option) any
|
later version.
|
later version.
|
|
|
This source is distributed in the hope that it will be
|
This source is distributed in the hope that it will be
|
useful, but WITHOUT ANY WARRANTY; without even the implied
|
useful, but WITHOUT ANY WARRANTY; without even the implied
|
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
|
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
|
PURPOSE. See the GNU Lesser General Public License for more
|
PURPOSE. See the GNU Lesser General Public License for more
|
details.
|
details.
|
|
|
You should have received a copy of the GNU Lesser General
|
You should have received a copy of the GNU Lesser General
|
Public License along with this source; if not, download it
|
Public License along with this source; if not, download it
|
from http://www.opencores.org/lgpl.shtml
|
from http://www.opencores.org/lgpl.shtml
|
|
|
*******************************************************************/
|
*******************************************************************/
|
|
|
|
|
`include "sdrc_define.v"
|
`include "sdrc_define.v"
|
|
|
module sdrc_bank_fsm (clk,
|
module sdrc_bank_fsm (clk,
|
reset_n,
|
reset_n,
|
|
|
/* Req from req_gen */
|
/* Req from req_gen */
|
r2b_req, // request
|
r2b_req, // request
|
r2b_req_id, // ID
|
r2b_req_id, // ID
|
r2b_start, // First chunk of burst
|
r2b_start, // First chunk of burst
|
r2b_last, // Last chunk of burst
|
r2b_last, // Last chunk of burst
|
r2b_wrap,
|
r2b_wrap,
|
r2b_raddr, // row address
|
r2b_raddr, // row address
|
r2b_caddr, // col address
|
r2b_caddr, // col address
|
r2b_len, // length
|
r2b_len, // length
|
r2b_write, // write request
|
r2b_write, // write request
|
b2r_ack,
|
b2r_ack,
|
sdr_dma_last,
|
sdr_dma_last,
|
|
|
/* Transfer request to xfr_ctl */
|
/* Transfer request to xfr_ctl */
|
b2x_req, // Request to xfr_ctl
|
b2x_req, // Request to xfr_ctl
|
b2x_start, // first chunk of transfer
|
b2x_start, // first chunk of transfer
|
b2x_last, // last chunk of transfer
|
b2x_last, // last chunk of transfer
|
b2x_wrap,
|
b2x_wrap,
|
b2x_id, // Transfer ID
|
b2x_id, // Transfer ID
|
b2x_addr, // row/col address
|
b2x_addr, // row/col address
|
b2x_len, // transfer length
|
b2x_len, // transfer length
|
b2x_cmd, // transfer command
|
b2x_cmd, // transfer command
|
x2b_ack, // command accepted
|
x2b_ack, // command accepted
|
|
|
/* Status to/from xfr_ctl */
|
/* Status to/from xfr_ctl */
|
tras_ok, // TRAS OK for this bank
|
tras_ok, // TRAS OK for this bank
|
xfr_ok,
|
xfr_ok,
|
x2b_refresh, // We did a refresh
|
x2b_refresh, // We did a refresh
|
x2b_pre_ok, // OK to do a precharge (per bank)
|
x2b_pre_ok, // OK to do a precharge (per bank)
|
x2b_act_ok, // OK to do an activate
|
x2b_act_ok, // OK to do an activate
|
x2b_rdok, // OK to do a read
|
x2b_rdok, // OK to do a read
|
x2b_wrok, // OK to do a write
|
x2b_wrok, // OK to do a write
|
|
|
/* current xfr row address of the bank */
|
/* current xfr row address of the bank */
|
bank_row,
|
bank_row,
|
|
|
/* SDRAM Timing */
|
/* SDRAM Timing */
|
tras_delay, // Active to precharge delay
|
tras_delay, // Active to precharge delay
|
trp_delay, // Precharge to active delay
|
trp_delay, // Precharge to active delay
|
trcd_delay); // Active to R/W delay
|
trcd_delay); // Active to R/W delay
|
|
|
parameter APP_AW = 30; // Application Address Width
|
parameter APP_AW = 30; // Application Address Width
|
parameter APP_DW = 32; // Application Data Width
|
parameter APP_DW = 32; // Application Data Width
|
parameter APP_BW = 4; // Application Byte Width
|
parameter APP_BW = 4; // Application Byte Width
|
|
|
parameter SDR_DW = 16; // SDR Data Width
|
parameter SDR_DW = 16; // SDR Data Width
|
parameter SDR_BW = 2; // SDR Byte Width
|
parameter SDR_BW = 2; // SDR Byte Width
|
parameter REQ_BW = 12; // Request Width
|
// 12 bit subtractor is not feasibile for FPGA, so changed to 8 bits
|
|
parameter REQ_BW = (`TARGET_DESIGN == `FPGA) ? 8 : 12; // Request Width
|
|
|
input clk, reset_n;
|
input clk, reset_n;
|
|
|
/* Req from bank_ctl */
|
/* Req from bank_ctl */
|
input r2b_req, r2b_start, r2b_last,
|
input r2b_req, r2b_start, r2b_last,
|
r2b_write, r2b_wrap;
|
r2b_write, r2b_wrap;
|
input [`SDR_REQ_ID_W-1:0] r2b_req_id;
|
input [`SDR_REQ_ID_W-1:0] r2b_req_id;
|
input [11:0] r2b_raddr;
|
input [11:0] r2b_raddr;
|
input [11:0] r2b_caddr;
|
input [11:0] r2b_caddr;
|
input [REQ_BW-1:0] r2b_len;
|
input [REQ_BW-1:0] r2b_len;
|
output b2r_ack;
|
output b2r_ack;
|
input sdr_dma_last;
|
input sdr_dma_last;
|
|
|
/* Req to xfr_ctl */
|
/* Req to xfr_ctl */
|
output b2x_req, b2x_start, b2x_last,
|
output b2x_req, b2x_start, b2x_last,
|
tras_ok, b2x_wrap;
|
tras_ok, b2x_wrap;
|
output [`SDR_REQ_ID_W-1:0] b2x_id;
|
output [`SDR_REQ_ID_W-1:0] b2x_id;
|
output [11:0] b2x_addr;
|
output [11:0] b2x_addr;
|
output [REQ_BW-1:0] b2x_len;
|
output [REQ_BW-1:0] b2x_len;
|
output [1:0] b2x_cmd;
|
output [1:0] b2x_cmd;
|
input x2b_ack;
|
input x2b_ack;
|
|
|
/* Status from xfr_ctl */
|
/* Status from xfr_ctl */
|
input x2b_refresh, x2b_act_ok, x2b_rdok,
|
input x2b_refresh, x2b_act_ok, x2b_rdok,
|
x2b_wrok, x2b_pre_ok, xfr_ok;
|
x2b_wrok, x2b_pre_ok, xfr_ok;
|
|
|
input [3:0] tras_delay, trp_delay, trcd_delay;
|
input [3:0] tras_delay, trp_delay, trcd_delay;
|
|
|
output [11:0] bank_row;
|
output [11:0] bank_row;
|
|
|
/****************************************************************************/
|
/****************************************************************************/
|
// Internal Nets
|
// Internal Nets
|
|
|
`define BANK_IDLE 3'b000
|
`define BANK_IDLE 3'b000
|
`define BANK_PRE 3'b001
|
`define BANK_PRE 3'b001
|
`define BANK_ACT 3'b010
|
`define BANK_ACT 3'b010
|
`define BANK_XFR 3'b011
|
`define BANK_XFR 3'b011
|
`define BANK_DMA_LAST_PRE 3'b100
|
`define BANK_DMA_LAST_PRE 3'b100
|
|
|
reg [2:0] bank_st, next_bank_st;
|
reg [2:0] bank_st, next_bank_st;
|
wire b2x_start, b2x_last;
|
wire b2x_start, b2x_last;
|
reg l_start, l_last;
|
reg l_start, l_last;
|
reg b2x_req, b2r_ack;
|
reg b2x_req, b2r_ack;
|
wire [`SDR_REQ_ID_W-1:0] b2x_id;
|
wire [`SDR_REQ_ID_W-1:0] b2x_id;
|
reg [`SDR_REQ_ID_W-1:0] l_id;
|
reg [`SDR_REQ_ID_W-1:0] l_id;
|
reg [11:0] b2x_addr;
|
reg [11:0] b2x_addr;
|
reg [REQ_BW-1:0] l_len;
|
reg [REQ_BW-1:0] l_len;
|
wire [REQ_BW-1:0] b2x_len;
|
wire [REQ_BW-1:0] b2x_len;
|
reg [1:0] b2x_cmd;
|
reg [1:0] b2x_cmd_t;
|
reg bank_valid;
|
reg bank_valid;
|
reg [11:0] bank_row;
|
reg [11:0] bank_row;
|
reg [3:0] tras_cntr, timer0;
|
reg [3:0] tras_cntr, timer0;
|
reg l_wrap, l_write;
|
reg l_wrap, l_write;
|
wire b2x_wrap;
|
wire b2x_wrap;
|
reg [11:0] l_raddr;
|
reg [11:0] l_raddr;
|
reg [11:0] l_caddr;
|
reg [11:0] l_caddr;
|
reg l_sdr_dma_last;
|
reg l_sdr_dma_last;
|
reg bank_prech_page_closed;
|
reg bank_prech_page_closed;
|
|
|
wire tras_ok_internal, tras_ok, activate_bank;
|
wire tras_ok_internal, tras_ok, activate_bank;
|
|
|
wire page_hit, timer0_tc, ld_trp, ld_trcd;
|
wire page_hit, timer0_tc_t, ld_trp, ld_trcd;
|
|
|
|
/*** Timing Break Logic Added for FPGA - Start ****/
|
|
reg x2b_wrok_r, xfr_ok_r , x2b_rdok_r;
|
|
reg [1:0] b2x_cmd_r,timer0_tc_r,tras_ok_r,x2b_pre_ok_r,x2b_act_ok_r;
|
|
always @ (posedge clk)
|
|
if (~reset_n) begin
|
|
x2b_wrok_r <= 1'b0;
|
|
xfr_ok_r <= 1'b0;
|
|
x2b_rdok_r <= 1'b0;
|
|
b2x_cmd_r <= 2'b0;
|
|
timer0_tc_r <= 1'b0;
|
|
tras_ok_r <= 1'b0;
|
|
x2b_pre_ok_r <= 1'b0;
|
|
x2b_act_ok_r <= 1'b0;
|
|
end
|
|
else begin
|
|
x2b_wrok_r <= x2b_wrok;
|
|
xfr_ok_r <= xfr_ok;
|
|
x2b_rdok_r <= x2b_rdok;
|
|
b2x_cmd_r <= b2x_cmd_t;
|
|
timer0_tc_r <= (ld_trp | ld_trcd) ? 1'b0 : timer0_tc_t;
|
|
tras_ok_r <= tras_ok_internal;
|
|
x2b_pre_ok_r <= x2b_pre_ok;
|
|
x2b_act_ok_r <= x2b_act_ok;
|
|
end
|
|
|
|
wire x2b_wrok_t = (`TARGET_DESIGN == `FPGA) ? x2b_wrok_r : x2b_wrok;
|
|
wire xfr_ok_t = (`TARGET_DESIGN == `FPGA) ? xfr_ok_r : xfr_ok;
|
|
wire x2b_rdok_t = (`TARGET_DESIGN == `FPGA) ? x2b_rdok_r : x2b_rdok;
|
|
wire [1:0] b2x_cmd = (`TARGET_DESIGN == `FPGA) ? b2x_cmd_r : b2x_cmd_t;
|
|
wire timer0_tc = (`TARGET_DESIGN == `FPGA) ? timer0_tc_r : timer0_tc_t;
|
|
assign tras_ok = (`TARGET_DESIGN == `FPGA) ? tras_ok_r : tras_ok_internal;
|
|
wire x2b_pre_ok_t = (`TARGET_DESIGN == `FPGA) ? x2b_pre_ok_r : x2b_pre_ok;
|
|
wire x2b_act_ok_t = (`TARGET_DESIGN == `FPGA) ? x2b_act_ok_r : x2b_act_ok;
|
|
|
|
/*** Timing Break Logic Added for FPGA - End****/
|
|
|
|
|
always @ (posedge clk)
|
always @ (posedge clk)
|
if (~reset_n) begin
|
if (~reset_n) begin
|
bank_valid <= 1'b0;
|
bank_valid <= 1'b0;
|
tras_cntr <= 4'b0;
|
tras_cntr <= 4'b0;
|
timer0 <= 4'b0;
|
timer0 <= 4'b0;
|
bank_st <= `BANK_IDLE;
|
bank_st <= `BANK_IDLE;
|
end // if (~reset_n)
|
end // if (~reset_n)
|
|
|
else begin
|
else begin
|
|
|
bank_valid <= (x2b_refresh || bank_prech_page_closed) ? 1'b0 : // force the bank status to be invalid
|
bank_valid <= (x2b_refresh || bank_prech_page_closed) ? 1'b0 : // force the bank status to be invalid
|
(activate_bank) ? 1'b1 : bank_valid;
|
(activate_bank) ? 1'b1 : bank_valid;
|
|
|
tras_cntr <= (activate_bank) ? tras_delay :
|
tras_cntr <= (activate_bank) ? tras_delay :
|
(~tras_ok_internal) ? tras_cntr - 4'b1 : 4'b0;
|
(~tras_ok_internal) ? tras_cntr - 4'b1 : 4'b0;
|
|
|
timer0 <= (ld_trp) ? trp_delay :
|
timer0 <= (ld_trp) ? trp_delay :
|
(ld_trcd) ? trcd_delay :
|
(ld_trcd) ? trcd_delay :
|
(~timer0_tc) ? timer0 - 4'b1 : timer0;
|
(timer0 != 'h0) ? timer0 - 4'b1 : timer0;
|
|
|
bank_st <= next_bank_st;
|
bank_st <= next_bank_st;
|
|
|
end // else: !if(~reset_n)
|
end // else: !if(~reset_n)
|
|
|
always @ (posedge clk) begin
|
always @ (posedge clk) begin
|
|
|
bank_row <= (activate_bank) ? b2x_addr : bank_row;
|
bank_row <= (activate_bank) ? b2x_addr : bank_row;
|
|
|
if (~reset_n) begin
|
if (~reset_n) begin
|
l_start <= 1'b0;
|
l_start <= 1'b0;
|
l_last <= 1'b0;
|
l_last <= 1'b0;
|
l_id <= 1'b0;
|
l_id <= 1'b0;
|
l_len <= 1'b0;
|
l_len <= 1'b0;
|
l_wrap <= 1'b0;
|
l_wrap <= 1'b0;
|
l_write <= 1'b0;
|
l_write <= 1'b0;
|
l_raddr <= 1'b0;
|
l_raddr <= 1'b0;
|
l_caddr <= 1'b0;
|
l_caddr <= 1'b0;
|
l_sdr_dma_last <= 1'b0;
|
l_sdr_dma_last <= 1'b0;
|
end
|
end
|
else begin
|
else begin
|
if (b2r_ack) begin
|
if (b2r_ack) begin
|
l_start <= r2b_start;
|
l_start <= r2b_start;
|
l_last <= r2b_last;
|
l_last <= r2b_last;
|
l_id <= r2b_req_id;
|
l_id <= r2b_req_id;
|
l_len <= r2b_len;
|
l_len <= r2b_len;
|
l_wrap <= r2b_wrap;
|
l_wrap <= r2b_wrap;
|
l_write <= r2b_write;
|
l_write <= r2b_write;
|
l_raddr <= r2b_raddr;
|
l_raddr <= r2b_raddr;
|
l_caddr <= r2b_caddr;
|
l_caddr <= r2b_caddr;
|
l_sdr_dma_last <= sdr_dma_last;
|
l_sdr_dma_last <= sdr_dma_last;
|
end // if (b2r_ack)
|
end // if (b2r_ack)
|
end
|
end
|
|
|
end // always @ (posedge clk)
|
end // always @ (posedge clk)
|
|
|
assign tras_ok_internal = ~|tras_cntr;
|
assign tras_ok_internal = ~|tras_cntr;
|
assign tras_ok = tras_ok_internal;
|
|
|
|
assign activate_bank = (b2x_cmd == `OP_ACT) & x2b_ack;
|
assign activate_bank = (b2x_cmd == `OP_ACT) & x2b_ack;
|
|
|
assign page_hit = (r2b_raddr == bank_row) ? bank_valid : 1'b0; // its a hit only if bank is valid
|
assign page_hit = (r2b_raddr == bank_row) ? bank_valid : 1'b0; // its a hit only if bank is valid
|
|
|
assign timer0_tc = ~|timer0;
|
assign timer0_tc_t = ~|timer0;
|
|
|
assign ld_trp = (b2x_cmd == `OP_PRE) ? x2b_ack : 1'b0;
|
assign ld_trp = (b2x_cmd == `OP_PRE) ? x2b_ack : 1'b0;
|
|
|
assign ld_trcd = (b2x_cmd == `OP_ACT) ? x2b_ack : 1'b0;
|
assign ld_trcd = (b2x_cmd == `OP_ACT) ? x2b_ack : 1'b0;
|
|
|
|
|
|
|
always @ (*) begin
|
always @ (*) begin
|
|
|
bank_prech_page_closed = 1'b0;
|
bank_prech_page_closed = 1'b0;
|
b2x_req = 1'b0;
|
b2x_req = 1'b0;
|
b2x_cmd = 2'bx;
|
b2x_cmd_t = 2'bx;
|
b2r_ack = 1'b0;
|
b2r_ack = 1'b0;
|
b2x_addr = 12'bx;
|
b2x_addr = 12'bx;
|
next_bank_st = bank_st;
|
next_bank_st = bank_st;
|
|
|
case (bank_st)
|
case (bank_st)
|
|
|
`BANK_IDLE : begin
|
`BANK_IDLE : begin
|
|
if(`TARGET_DESIGN == `FPGA) begin // To break the timing, b2x request are generated delayed
|
|
if (~r2b_req) begin
|
|
next_bank_st = `BANK_IDLE;
|
|
end // if (~r2b_req)
|
|
else if (page_hit) begin
|
|
b2r_ack = 1'b1;
|
|
b2x_cmd_t = (r2b_write) ? `OP_WR : `OP_RD;
|
|
next_bank_st = `BANK_XFR;
|
|
end // if (page_hit)
|
|
else begin // page_miss
|
|
b2r_ack = 1'b1;
|
|
b2x_cmd_t = `OP_PRE;
|
|
next_bank_st = `BANK_PRE; // bank was precharged on l_sdr_dma_last
|
|
end // else: !if(page_hit)
|
|
end else begin // ASIC
|
if (~r2b_req) begin
|
if (~r2b_req) begin
|
bank_prech_page_closed = 1'b0;
|
bank_prech_page_closed = 1'b0;
|
b2x_req = 1'b0;
|
b2x_req = 1'b0;
|
b2x_cmd = 2'bx;
|
b2x_cmd_t = 2'bx;
|
b2r_ack = 1'b0;
|
b2r_ack = 1'b0;
|
b2x_addr = 12'bx;
|
b2x_addr = 12'bx;
|
next_bank_st = `BANK_IDLE;
|
next_bank_st = `BANK_IDLE;
|
end // if (~r2b_req)
|
end // if (~r2b_req)
|
else if (page_hit) begin
|
else if (page_hit) begin
|
b2x_req = (r2b_write) ? x2b_wrok & xfr_ok :
|
b2x_req = (r2b_write) ? x2b_wrok_t & xfr_ok_t :
|
x2b_rdok & xfr_ok;
|
x2b_rdok_t & xfr_ok_t;
|
b2x_cmd = (r2b_write) ? `OP_WR : `OP_RD;
|
b2x_cmd_t = (r2b_write) ? `OP_WR : `OP_RD;
|
b2r_ack = 1'b1;
|
b2r_ack = 1'b1;
|
b2x_addr = r2b_caddr;
|
b2x_addr = r2b_caddr;
|
next_bank_st = (x2b_ack) ? `BANK_IDLE : `BANK_XFR; // in case of hit, stay here till xfr sm acks
|
next_bank_st = (x2b_ack) ? `BANK_IDLE : `BANK_XFR; // in case of hit, stay here till xfr sm acks
|
end // if (page_hit)
|
end // if (page_hit)
|
else begin // page_miss
|
else begin // page_miss
|
b2x_req = tras_ok_internal & x2b_pre_ok;
|
b2x_req = tras_ok & x2b_pre_ok_t;
|
b2x_cmd = `OP_PRE;
|
b2x_cmd_t = `OP_PRE;
|
b2r_ack = 1'b1;
|
b2r_ack = 1'b1;
|
b2x_addr = r2b_raddr & 12'hBFF; // Dont want to pre all banks!
|
b2x_addr = r2b_raddr & 12'hBFF; // Dont want to pre all banks!
|
next_bank_st = (l_sdr_dma_last) ? `BANK_PRE : (x2b_ack) ? `BANK_ACT : `BANK_PRE; // bank was precharged on l_sdr_dma_last
|
next_bank_st = (l_sdr_dma_last) ? `BANK_PRE : (x2b_ack) ? `BANK_ACT : `BANK_PRE; // bank was precharged on l_sdr_dma_last
|
end // else: !if(page_hit)
|
end // else: !if(page_hit)
|
|
end
|
end // case: `BANK_IDLE
|
end // case: `BANK_IDLE
|
|
|
`BANK_PRE : begin
|
`BANK_PRE : begin
|
b2x_req = tras_ok_internal & x2b_pre_ok;
|
b2x_req = tras_ok & x2b_pre_ok_t;
|
b2x_cmd = `OP_PRE;
|
b2x_cmd_t = `OP_PRE;
|
b2r_ack = 1'b0;
|
b2r_ack = 1'b0;
|
b2x_addr = l_raddr & 12'hBFF; // Dont want to pre all banks!
|
b2x_addr = l_raddr & 12'hBFF; // Dont want to pre all banks!
|
bank_prech_page_closed = 1'b0;
|
bank_prech_page_closed = 1'b0;
|
next_bank_st = (x2b_ack) ? `BANK_ACT : `BANK_PRE;
|
next_bank_st = (x2b_ack) ? `BANK_ACT : `BANK_PRE;
|
end // case: `BANK_PRE
|
end // case: `BANK_PRE
|
|
|
`BANK_ACT : begin
|
`BANK_ACT : begin
|
b2x_req = timer0_tc & x2b_act_ok;
|
b2x_req = timer0_tc & x2b_act_ok_t;
|
b2x_cmd = `OP_ACT;
|
b2x_cmd_t = `OP_ACT;
|
b2r_ack = 1'b0;
|
b2r_ack = 1'b0;
|
b2x_addr = l_raddr;
|
b2x_addr = l_raddr;
|
bank_prech_page_closed = 1'b0;
|
bank_prech_page_closed = 1'b0;
|
next_bank_st = (x2b_ack) ? `BANK_XFR : `BANK_ACT;
|
next_bank_st = (x2b_ack) ? `BANK_XFR : `BANK_ACT;
|
end // case: `BANK_ACT
|
end // case: `BANK_ACT
|
|
|
`BANK_XFR : begin
|
`BANK_XFR : begin
|
b2x_req = (l_write) ? timer0_tc & x2b_wrok & xfr_ok :
|
b2x_req = (l_write) ? timer0_tc & x2b_wrok_t & xfr_ok_t :
|
timer0_tc & x2b_rdok & xfr_ok;
|
timer0_tc & x2b_rdok_t & xfr_ok_t;
|
b2x_cmd = (l_write) ? `OP_WR : `OP_RD;
|
b2x_cmd_t = (l_write) ? `OP_WR : `OP_RD;
|
b2r_ack = 1'b0;
|
b2r_ack = 1'b0;
|
b2x_addr = l_caddr;
|
b2x_addr = l_caddr;
|
bank_prech_page_closed = 1'b0;
|
bank_prech_page_closed = 1'b0;
|
next_bank_st = (x2b_refresh) ? `BANK_ACT :
|
next_bank_st = (x2b_refresh) ? `BANK_ACT :
|
(x2b_ack & l_sdr_dma_last) ? `BANK_DMA_LAST_PRE :
|
(x2b_ack & l_sdr_dma_last) ? `BANK_DMA_LAST_PRE :
|
(x2b_ack) ? `BANK_IDLE : `BANK_XFR;
|
(x2b_ack) ? `BANK_IDLE : `BANK_XFR;
|
end // case: `BANK_XFR
|
end // case: `BANK_XFR
|
|
|
`BANK_DMA_LAST_PRE : begin
|
`BANK_DMA_LAST_PRE : begin
|
b2x_req = tras_ok_internal & x2b_pre_ok;
|
b2x_req = tras_ok & x2b_pre_ok_t;
|
b2x_cmd = `OP_PRE;
|
b2x_cmd_t = `OP_PRE;
|
b2r_ack = 1'b0;
|
b2r_ack = 1'b0;
|
b2x_addr = l_raddr & 12'hBFF; // Dont want to pre all banks!
|
b2x_addr = l_raddr & 12'hBFF; // Dont want to pre all banks!
|
bank_prech_page_closed = 1'b1;
|
bank_prech_page_closed = 1'b1;
|
next_bank_st = (x2b_ack) ? `BANK_IDLE : `BANK_DMA_LAST_PRE;
|
next_bank_st = (x2b_ack) ? `BANK_IDLE : `BANK_DMA_LAST_PRE;
|
end // case: `BANK_DMA_LAST_PRE
|
end // case: `BANK_DMA_LAST_PRE
|
|
|
endcase // case(bank_st)
|
endcase // case(bank_st)
|
|
|
end // always @ (bank_st or ...)
|
end // always @ (bank_st or ...)
|
|
|
assign b2x_start = (bank_st == `BANK_IDLE) ? r2b_start : l_start;
|
assign b2x_start = (bank_st == `BANK_IDLE) ? r2b_start : l_start;
|
|
|
assign b2x_last = (bank_st == `BANK_IDLE) ? r2b_last : l_last;
|
assign b2x_last = (bank_st == `BANK_IDLE) ? r2b_last : l_last;
|
|
|
assign b2x_id = (bank_st == `BANK_IDLE) ? r2b_req_id : l_id;
|
assign b2x_id = (bank_st == `BANK_IDLE) ? r2b_req_id : l_id;
|
|
|
assign b2x_len = (bank_st == `BANK_IDLE) ? r2b_len : l_len;
|
assign b2x_len = (bank_st == `BANK_IDLE) ? r2b_len : l_len;
|
|
|
assign b2x_wrap = (bank_st == `BANK_IDLE) ? r2b_wrap : l_wrap;
|
assign b2x_wrap = (bank_st == `BANK_IDLE) ? r2b_wrap : l_wrap;
|
|
|
endmodule // sdr_bank_fsm
|
endmodule // sdr_bank_fsm
|
|
|