OpenCores
URL https://opencores.org/ocsvn/sdr_ctrl/sdr_ctrl/trunk

Subversion Repositories sdr_ctrl

[/] [sdr_ctrl/] [trunk/] [rtl/] [core/] [sdrc_core.v] - Diff between revs 9 and 13

Go to most recent revision | Only display areas with differences | Details | Blame | View Log

Rev 9 Rev 13
/*********************************************************************
/*********************************************************************
 
 
  SDRAM Controller Core File
  SDRAM Controller Core File
 
 
  This file is part of the sdram controller project
  This file is part of the sdram controller project
  http://www.opencores.org/cores/sdr_ctrl/
  http://www.opencores.org/cores/sdr_ctrl/
 
 
  Description: SDRAM Controller Core Module
  Description: SDRAM Controller Core Module
    2 types of SDRAMs are supported, 1Mx16 2 bank, or 4Mx16 4 bank.
    2 types of SDRAMs are supported, 1Mx16 2 bank, or 4Mx16 4 bank.
    This block integrate following sub modules
    This block integrate following sub modules
 
 
    sdrc_bs_convert
    sdrc_bs_convert
        convert the system side 32 bit into equvailent 16/32 SDR format
        convert the system side 32 bit into equvailent 16/32 SDR format
    sdrc_req_gen
    sdrc_req_gen
        This module takes requests from the app, chops them to burst booundaries
        This module takes requests from the app, chops them to burst booundaries
        if wrap=0, decodes the bank and passe the request to bank_ctl
        if wrap=0, decodes the bank and passe the request to bank_ctl
   sdrc_xfr_ctl
   sdrc_xfr_ctl
      This module takes requests from sdr_bank_ctl, runs the transfer and
      This module takes requests from sdr_bank_ctl, runs the transfer and
      controls data flow to/from the app. At the end of the transfer it issues a
      controls data flow to/from the app. At the end of the transfer it issues a
      burst terminate if not at the end of a burst and another command to this
      burst terminate if not at the end of a burst and another command to this
      bank is not available.
      bank is not available.
 
 
   sdrc_bank_ctl
   sdrc_bank_ctl
      This module takes requests from sdr_req_gen, checks for page hit/miss and
      This module takes requests from sdr_req_gen, checks for page hit/miss and
      issues precharge/activate commands and then passes the request to
      issues precharge/activate commands and then passes the request to
      sdr_xfr_ctl.
      sdr_xfr_ctl.
 
 
 
 
  Assumption: SDRAM Pads should be placed near to this module. else
  Assumption: SDRAM Pads should be placed near to this module. else
  user should add a FF near the pads
  user should add a FF near the pads
 
 
  To Do:
  To Do:
    nothing
    nothing
 
 
  Author(s):
  Author(s):
      - Dinesh Annayya, dinesha@opencores.org
      - Dinesh Annayya, dinesha@opencores.org
  Version  : 1.0 - 8th Jan 2012
  Version  : 1.0 - 8th Jan 2012
 
 
 
 
 
 
 Copyright (C) 2000 Authors and OPENCORES.ORG
 Copyright (C) 2000 Authors and OPENCORES.ORG
 
 
 This source file may be used and distributed without
 This source file may be used and distributed without
 restriction provided that this copyright statement is not
 restriction provided that this copyright statement is not
 removed from the file and that any derivative work contains
 removed from the file and that any derivative work contains
 the original copyright notice and the associated disclaimer.
 the original copyright notice and the associated disclaimer.
 
 
 This source file is free software; you can redistribute it
 This source file is free software; you can redistribute it
 and/or modify it under the terms of the GNU Lesser General
 and/or modify it under the terms of the GNU Lesser General
 Public License as published by the Free Software Foundation;
 Public License as published by the Free Software Foundation;
 either version 2.1 of the License, or (at your option) any
 either version 2.1 of the License, or (at your option) any
later version.
later version.
 
 
 This source is distributed in the hope that it will be
 This source is distributed in the hope that it will be
 useful, but WITHOUT ANY WARRANTY; without even the implied
 useful, but WITHOUT ANY WARRANTY; without even the implied
 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
 PURPOSE.  See the GNU Lesser General Public License for more
 PURPOSE.  See the GNU Lesser General Public License for more
 details.
 details.
 
 
 You should have received a copy of the GNU Lesser General
 You should have received a copy of the GNU Lesser General
 Public License along with this source; if not, download it
 Public License along with this source; if not, download it
 from http://www.opencores.org/lgpl.shtml
 from http://www.opencores.org/lgpl.shtml
 
 
*******************************************************************/
*******************************************************************/
 
 
 
 
`include "sdrc.def"
`include "sdrc.def"
module sdrc_core
module sdrc_core
           (
           (
                clk,
                clk,
                pad_clk,
                pad_clk,
                reset_n,
                reset_n,
                sdr_width,
                sdr_width,
 
                cfg_colbits,
 
 
                /* Request from app */
                /* Request from app */
                app_req,                // Transfer Request
                app_req,                // Transfer Request
                app_req_addr,           // SDRAM Address
                app_req_addr,           // SDRAM Address
                app_req_addr_mask,      // Address mask for queue wrap
                app_req_addr_mask,      // Address mask for queue wrap
                app_req_len,            // Burst Length (in 16 bit words)
                app_req_len,            // Burst Length (in 16 bit words)
                app_req_wrap,           // Wrap mode request (xfr_len = 4)
                app_req_wrap,           // Wrap mode request (xfr_len = 4)
                app_req_wr_n,           // 0 => Write request, 1 => read req
                app_req_wr_n,           // 0 => Write request, 1 => read req
                app_req_ack,            // Request has been accepted
                app_req_ack,            // Request has been accepted
                sdr_core_busy_n,                // OK to arbitrate next request
                sdr_core_busy_n,                // OK to arbitrate next request
                cfg_req_depth,          //how many req. buffer should hold
                cfg_req_depth,          //how many req. buffer should hold
 
 
                app_wr_data,
                app_wr_data,
                app_wr_en_n,
                app_wr_en_n,
                app_rd_data,
                app_rd_data,
                app_rd_valid,
                app_rd_valid,
                app_wr_next_req,
                app_wr_next_req,
                sdr_init_done,
                sdr_init_done,
                app_req_dma_last,
                app_req_dma_last,
 
 
                /* Interface to SDRAMs */
                /* Interface to SDRAMs */
                sdr_cs_n,
                sdr_cs_n,
                sdr_cke,
                sdr_cke,
                sdr_ras_n,
                sdr_ras_n,
                sdr_cas_n,
                sdr_cas_n,
                sdr_we_n,
                sdr_we_n,
                sdr_dqm,
                sdr_dqm,
                sdr_ba,
                sdr_ba,
                sdr_addr,
                sdr_addr,
                pad_sdr_din,
                pad_sdr_din,
                sdr_dout,
                sdr_dout,
                sdr_den_n,
                sdr_den_n,
 
 
                /* Parameters */
                /* Parameters */
                cfg_sdr_en,
                cfg_sdr_en,
                cfg_sdr_dev_config,     // using 64M/4bank SDRAMs
                cfg_sdr_dev_config,     // using 64M/4bank SDRAMs
                cfg_sdr_mode_reg,
                cfg_sdr_mode_reg,
                cfg_sdr_tras_d,
                cfg_sdr_tras_d,
                cfg_sdr_trp_d,
                cfg_sdr_trp_d,
                cfg_sdr_trcd_d,
                cfg_sdr_trcd_d,
                cfg_sdr_cas,
                cfg_sdr_cas,
                cfg_sdr_trcar_d,
                cfg_sdr_trcar_d,
                cfg_sdr_twr_d,
                cfg_sdr_twr_d,
                cfg_sdr_rfsh,
                cfg_sdr_rfsh,
                cfg_sdr_rfmax);
                cfg_sdr_rfmax);
 
 
parameter  APP_AW   = 30;  // Application Address Width
parameter  APP_AW   = 30;  // Application Address Width
parameter  APP_DW   = 32;  // Application Data Width 
parameter  APP_DW   = 32;  // Application Data Width 
parameter  APP_BW   = 4;   // Application Byte Width
parameter  APP_BW   = 4;   // Application Byte Width
parameter  APP_RW   = 9;   // Application Request Width
parameter  APP_RW   = 9;   // Application Request Width
 
 
parameter  SDR_DW   = 16;  // SDR Data Width 
parameter  SDR_DW   = 16;  // SDR Data Width 
parameter  SDR_BW   = 2;   // SDR Byte Width
parameter  SDR_BW   = 2;   // SDR Byte Width
 
 
 
 
//-----------------------------------------------
//-----------------------------------------------
// Global Variable
// Global Variable
// ----------------------------------------------
// ----------------------------------------------
input                   clk                 ; // SDRAM Clock 
input                   clk                 ; // SDRAM Clock 
input                   pad_clk             ; // SDRAM Clock from Pad, used for registering Read Data
input                   pad_clk             ; // SDRAM Clock from Pad, used for registering Read Data
input                   reset_n             ; // Reset Signal
input                   reset_n             ; // Reset Signal
input                   sdr_width           ; // 0 - 32 Bit SDR, 1 - 16 Bit SDR
input                   sdr_width           ; // 0 - 32 Bit SDR, 1 - 16 Bit SDR
 
input [1:0]             cfg_colbits         ; // 2'b00 - 8 Bit column address, 2'b01 - 9 Bit, 10 - 10 bit, 11 - 11Bits
 
 
 
 
//------------------------------------------------
//------------------------------------------------
// Request from app
// Request from app
//------------------------------------------------
//------------------------------------------------
input                   app_req             ; // Application Request
input                   app_req             ; // Application Request
input [APP_AW-1:0]       app_req_addr        ; // Address 
input [APP_AW-1:0]       app_req_addr        ; // Address 
input [APP_AW-2:0]      app_req_addr_mask   ; // Address Mask
input [APP_AW-2:0]      app_req_addr_mask   ; // Address Mask
input                   app_req_wr_n        ; // 0 - Write, 1 - Read
input                   app_req_wr_n        ; // 0 - Write, 1 - Read
input                   app_req_wrap        ; // Address Wrap
input                   app_req_wrap        ; // Address Wrap
output                  app_req_ack         ; // Application Request Ack
output                  app_req_ack         ; // Application Request Ack
output                  sdr_core_busy_n     ; // 0 - busy, 1 - free
output                  sdr_core_busy_n     ; // 0 - busy, 1 - free
 
 
input [APP_DW-1:0]       app_wr_data         ; // Write Data
input [APP_DW-1:0]       app_wr_data         ; // Write Data
output                  app_wr_next_req     ; // Next Write Data Request
output                  app_wr_next_req     ; // Next Write Data Request
input [APP_BW-1:0]       app_wr_en_n         ; // Byte wise Write Enable
input [APP_BW-1:0]       app_wr_en_n         ; // Byte wise Write Enable
output [APP_DW-1:0]      app_rd_data         ; // Read Data
output [APP_DW-1:0]      app_rd_data         ; // Read Data
output                  app_rd_valid        ; // Read Valid
output                  app_rd_valid        ; // Read Valid
 
 
//------------------------------------------------
//------------------------------------------------
// Interface to SDRAMs
// Interface to SDRAMs
//------------------------------------------------
//------------------------------------------------
output                  sdr_cke             ; // SDRAM CKE
output                  sdr_cke             ; // SDRAM CKE
output                  sdr_cs_n            ; // SDRAM Chip Select
output                  sdr_cs_n            ; // SDRAM Chip Select
output                  sdr_ras_n           ; // SDRAM ras
output                  sdr_ras_n           ; // SDRAM ras
output                  sdr_cas_n           ; // SDRAM cas
output                  sdr_cas_n           ; // SDRAM cas
output                  sdr_we_n            ; // SDRAM write enable
output                  sdr_we_n            ; // SDRAM write enable
output [SDR_BW-1:0]      sdr_dqm             ; // SDRAM Data Mask
output [SDR_BW-1:0]      sdr_dqm             ; // SDRAM Data Mask
output [1:0]             sdr_ba              ; // SDRAM Bank Enable
output [1:0]             sdr_ba              ; // SDRAM Bank Enable
output [11:0]            sdr_addr            ; // SDRAM Address
output [11:0]            sdr_addr            ; // SDRAM Address
input [SDR_DW-1:0]       pad_sdr_din         ; // SDRA Data Input
input [SDR_DW-1:0]       pad_sdr_din         ; // SDRA Data Input
output [SDR_DW-1:0]      sdr_dout            ; // SDRAM Data Output
output [SDR_DW-1:0]      sdr_dout            ; // SDRAM Data Output
output [SDR_BW-1:0]      sdr_den_n           ; // SDRAM Data Output enable
output [SDR_BW-1:0]      sdr_den_n           ; // SDRAM Data Output enable
 
 
//------------------------------------------------
//------------------------------------------------
// Configuration Parameter
// Configuration Parameter
//------------------------------------------------
//------------------------------------------------
output                  sdr_init_done       ;
output                  sdr_init_done       ; // Indicate SDRAM Initialisation Done
input [3:0]              cfg_sdr_tras_d      ;
input [3:0]              cfg_sdr_tras_d      ; // Active to precharge delay
input [3:0]             cfg_sdr_trp_d       ;
input [3:0]             cfg_sdr_trp_d       ; // Precharge to active delay
input [3:0]             cfg_sdr_trcd_d      ;
input [3:0]             cfg_sdr_trcd_d      ; // Active to R/W delay
input                   cfg_sdr_en          ;
input                   cfg_sdr_en          ; // Enable SDRAM controller
input [1:0]             cfg_sdr_dev_config  ; // 2'b00 - 8 MB, 01 - 16 MB, 10 - 32 MB , 11 - 64 MB
input [1:0]             cfg_sdr_dev_config  ; // 2'b00 - 8 MB, 01 - 16 MB, 10 - 32 MB , 11 - 64 MB
input [1:0]              cfg_req_depth       ;
input [1:0]              cfg_req_depth       ; // Maximum Request accepted by SDRAM controller
input [APP_RW-1:0]       app_req_len         ;
input [APP_RW-1:0]       app_req_len         ; // Application Burst Request length in 32 bit 
input [11:0]             cfg_sdr_mode_reg    ;
input [11:0]             cfg_sdr_mode_reg    ;
input [2:0]              cfg_sdr_cas         ;
input [2:0]              cfg_sdr_cas         ; // SDRAM CAS Latency
input [3:0]              cfg_sdr_trcar_d     ;
input [3:0]              cfg_sdr_trcar_d     ; // Auto-refresh period
input [3:0]             cfg_sdr_twr_d       ;
input [3:0]             cfg_sdr_twr_d       ; // Write recovery delay
input [`SDR_RFSH_TIMER_W-1 : 0] cfg_sdr_rfsh;
input [`SDR_RFSH_TIMER_W-1 : 0] cfg_sdr_rfsh;
input [`SDR_RFSH_ROW_CNT_W -1 : 0] cfg_sdr_rfmax;
input [`SDR_RFSH_ROW_CNT_W -1 : 0] cfg_sdr_rfmax;
input                   app_req_dma_last;    // this signal should close the bank
input                   app_req_dma_last;    // this signal should close the bank
 
 
/****************************************************************************/
/****************************************************************************/
// Internal Nets
// Internal Nets
 
 
// SDR_REQ_GEN
// SDR_REQ_GEN
wire                    r2x_idle, app_req_ack,app_req_ack_int;
wire                    r2x_idle, app_req_ack,app_req_ack_int;
wire                    app_req_dma_last_int;
wire                    app_req_dma_last_int;
wire                    r2b_req, r2b_start, r2b_last, r2b_write;
wire                    r2b_req, r2b_start, r2b_last, r2b_write;
wire [`SDR_REQ_ID_W-1:0]r2b_req_id;
wire [`SDR_REQ_ID_W-1:0]r2b_req_id;
wire [1:0]               r2b_ba;
wire [1:0]               r2b_ba;
wire [11:0]              r2b_raddr;
wire [11:0]              r2b_raddr;
wire [11:0]              r2b_caddr;
wire [11:0]              r2b_caddr;
wire [APP_RW-1:0]        r2b_len;
wire [APP_RW-1:0]        r2b_len;
 
 
// SDR BANK CTL
// SDR BANK CTL
wire                    b2r_ack, b2x_idle;
wire                    b2r_ack, b2x_idle;
wire                    b2x_req, b2x_start, b2x_last, b2x_tras_ok;
wire                    b2x_req, b2x_start, b2x_last, b2x_tras_ok;
wire [`SDR_REQ_ID_W-1:0]b2x_id;
wire [`SDR_REQ_ID_W-1:0]b2x_id;
wire [1:0]               b2x_ba;
wire [1:0]               b2x_ba;
wire                    b2x_ba_last;
wire                    b2x_ba_last;
wire [11:0]              b2x_addr;
wire [11:0]              b2x_addr;
wire [APP_RW-1:0]        b2x_len;
wire [APP_RW-1:0]        b2x_len;
wire [1:0]               b2x_cmd;
wire [1:0]               b2x_cmd;
 
 
// SDR_XFR_CTL
// SDR_XFR_CTL
wire                    x2b_ack;
wire                    x2b_ack;
wire [3:0]               x2b_pre_ok;
wire [3:0]               x2b_pre_ok;
wire                    x2b_refresh, x2b_act_ok, x2b_rdok, x2b_wrok;
wire                    x2b_refresh, x2b_act_ok, x2b_rdok, x2b_wrok;
wire                    xfr_rdstart, xfr_rdlast;
wire                    xfr_rdstart, xfr_rdlast;
wire                    xfr_wrstart, xfr_wrlast;
wire                    xfr_wrstart, xfr_wrlast;
wire [`SDR_REQ_ID_W-1:0]xfr_id;
wire [`SDR_REQ_ID_W-1:0]xfr_id;
wire [13:0]              xfr_addr_msb;
wire [13:0]              xfr_addr_msb;
wire [APP_DW-1:0]        app_rd_data;
wire [APP_DW-1:0]        app_rd_data;
wire                    app_wr_next_req, app_rd_valid;
wire                    app_wr_next_req, app_rd_valid;
wire                    sdr_cs_n, sdr_cke, sdr_ras_n, sdr_cas_n, sdr_we_n;
wire                    sdr_cs_n, sdr_cke, sdr_ras_n, sdr_cas_n, sdr_we_n;
wire [SDR_BW-1:0]        sdr_dqm;
wire [SDR_BW-1:0]        sdr_dqm;
wire [1:0]               sdr_ba;
wire [1:0]               sdr_ba;
wire [11:0]              sdr_addr;
wire [11:0]              sdr_addr;
wire [SDR_DW-1:0]        sdr_dout;
wire [SDR_DW-1:0]        sdr_dout;
wire [SDR_DW-1:0]        sdr_dout_int;
wire [SDR_DW-1:0]        sdr_dout_int;
wire [SDR_BW-1:0]        sdr_den_n;
wire [SDR_BW-1:0]        sdr_den_n;
wire [SDR_BW-1:0]        sdr_den_n_int;
wire [SDR_BW-1:0]        sdr_den_n_int;
 
 
wire [1:0]               xfr_bank_sel;
wire [1:0]               xfr_bank_sel;
wire [1:0]               cfg_sdr_dev_config;
wire [1:0]               cfg_sdr_dev_config;
 
 
wire [APP_AW:0]          app_req_addr_int;
wire [APP_AW:0]          app_req_addr_int;
wire [APP_AW-1:0]        app_req_addr;
wire [APP_AW-1:0]        app_req_addr;
wire [APP_RW-1:0]        app_req_len_int;
wire [APP_RW-1:0]        app_req_len_int;
wire [APP_RW-1:0]        app_req_len;
wire [APP_RW-1:0]        app_req_len;
 
 
wire [APP_DW-1:0]        app_wr_data;
wire [APP_DW-1:0]        app_wr_data;
wire [SDR_DW-1:0]        add_wr_data_int;
wire [SDR_DW-1:0]        add_wr_data_int;
wire [APP_BW-1:0]        app_wr_en_n;
wire [APP_BW-1:0]        app_wr_en_n;
wire [SDR_BW-1:0]        app_wr_en_n_int;
wire [SDR_BW-1:0]        app_wr_en_n_int;
 
 
//wire [31:0] app_rd_data;
//wire [31:0] app_rd_data;
wire [SDR_DW-1:0]        app_rd_data_int;
wire [SDR_DW-1:0]        app_rd_data_int;
 
 
//
//
wire                     app_req_int;
wire                     app_req_int;
wire                     r2b_wrap;
wire                     r2b_wrap;
wire                     b2r_arb_ok;
wire                     b2r_arb_ok;
wire                     b2x_wrap;
wire                     b2x_wrap;
wire                     app_wr_next_int;
wire                     app_wr_next_int;
wire                     app_rd_valid_int;
wire                     app_rd_valid_int;
 
 
// synopsys translate_off 
// synopsys translate_off 
   wire [3:0]           sdr_cmd;
   wire [3:0]           sdr_cmd;
   assign sdr_cmd = {sdr_cs_n, sdr_ras_n, sdr_cas_n, sdr_we_n};
   assign sdr_cmd = {sdr_cs_n, sdr_ras_n, sdr_cas_n, sdr_we_n};
// synopsys translate_on 
// synopsys translate_on 
 
 
   assign sdr_den_n = sdr_width ? {2'b00,sdr_den_n_int[1:0]} : sdr_den_n_int;
   assign sdr_den_n = sdr_width ? {2'b00,sdr_den_n_int[1:0]} : sdr_den_n_int;
   assign sdr_dout = sdr_width ? {16'h0000,sdr_dout_int[15:0]} : sdr_dout_int;
   assign sdr_dout = sdr_width ? {16'h0000,sdr_dout_int[15:0]} : sdr_dout_int;
 
 
 
 
   /****************************************************************************/
   /****************************************************************************/
   // Instantiate sdr_req_gen
   // Instantiate sdr_req_gen
   // This module takes requests from the app, chops them to burst booundaries
   // This module takes requests from the app, chops them to burst booundaries
   // if wrap=0, decodes the bank and passe the request to bank_ctl
   // if wrap=0, decodes the bank and passe the request to bank_ctl
 
 
sdrc_req_gen #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_req_gen (
sdrc_req_gen #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_req_gen (
          .clk                (clk          ),
          .clk                (clk          ),
          .reset_n            (reset_n            ),
          .reset_n            (reset_n            ),
          .sdr_dev_config     (cfg_sdr_dev_config ),
          .sdr_dev_config     (cfg_sdr_dev_config ),
 
          .cfg_colbits        (cfg_colbits        ),
 
 
        /* Request from app */
        /* Request from app */
          .r2x_idle           (r2x_idle           ),
          .r2x_idle           (r2x_idle           ),
          .req                (app_req_int        ),
          .req                (app_req_int        ),
          .req_id             (4'b0               ),
          .req_id             (4'b0               ),
          .req_addr           (app_req_addr_int   ),
          .req_addr           (app_req_addr_int   ),
          .req_addr_mask      (app_req_addr_mask  ),
          .req_addr_mask      (app_req_addr_mask  ),
          .req_len            (app_req_len_int    ),
          .req_len            (app_req_len_int    ),
          .req_wrap           (app_req_wrap       ),
          .req_wrap           (app_req_wrap       ),
          .req_wr_n           (app_req_wr_n       ),
          .req_wr_n           (app_req_wr_n       ),
          .req_ack            (app_req_ack_int      ),
          .req_ack            (app_req_ack_int      ),
          .sdr_core_busy_n    (sdr_core_busy_n    ),
          .sdr_core_busy_n    (sdr_core_busy_n    ),
 
 
       /* Req to bank_ctl */
       /* Req to bank_ctl */
          .r2b_req            (r2b_req            ),
          .r2b_req            (r2b_req            ),
          .r2b_req_id         (r2b_req_id         ),
          .r2b_req_id         (r2b_req_id         ),
          .r2b_start          (r2b_start          ),
          .r2b_start          (r2b_start          ),
          .r2b_last           (r2b_last           ),
          .r2b_last           (r2b_last           ),
          .r2b_wrap           (r2b_wrap           ),
          .r2b_wrap           (r2b_wrap           ),
          .r2b_ba             (r2b_ba             ),
          .r2b_ba             (r2b_ba             ),
          .r2b_raddr          (r2b_raddr          ),
          .r2b_raddr          (r2b_raddr          ),
          .r2b_caddr          (r2b_caddr          ),
          .r2b_caddr          (r2b_caddr          ),
          .r2b_len            (r2b_len            ),
          .r2b_len            (r2b_len            ),
          .r2b_write          (r2b_write          ),
          .r2b_write          (r2b_write          ),
          .b2r_ack            (b2r_ack            ),
          .b2r_ack            (b2r_ack            ),
          .b2r_arb_ok         (b2r_arb_ok         ),
          .b2r_arb_ok         (b2r_arb_ok         ),
          .sdr_width          (sdr_width          ),
          .sdr_width          (sdr_width          ),
          .sdr_init_done      (sdr_init_done      )
          .sdr_init_done      (sdr_init_done      )
     );
     );
 
 
   /****************************************************************************/
   /****************************************************************************/
   // Instantiate sdr_bank_ctl
   // Instantiate sdr_bank_ctl
   // This module takes requests from sdr_req_gen, checks for page hit/miss and
   // This module takes requests from sdr_req_gen, checks for page hit/miss and
   // issues precharge/activate commands and then passes the request to
   // issues precharge/activate commands and then passes the request to
   // sdr_xfr_ctl. 
   // sdr_xfr_ctl. 
 
 
sdrc_bank_ctl #(.SDR_DW(SDR_DW) ,  .SDR_BW(SDR_BW)) u_bank_ctl (
sdrc_bank_ctl #(.SDR_DW(SDR_DW) ,  .SDR_BW(SDR_BW)) u_bank_ctl (
          .clk                (clk          ),
          .clk                (clk          ),
          .reset_n            (reset_n            ),
          .reset_n            (reset_n            ),
          .a2b_req_depth      (cfg_req_depth      ),
          .a2b_req_depth      (cfg_req_depth      ),
 
 
      /* Req from req_gen */
      /* Req from req_gen */
          .r2b_req            (r2b_req            ),
          .r2b_req            (r2b_req            ),
          .r2b_req_id         (r2b_req_id         ),
          .r2b_req_id         (r2b_req_id         ),
          .r2b_start          (r2b_start          ),
          .r2b_start          (r2b_start          ),
          .r2b_last           (r2b_last           ),
          .r2b_last           (r2b_last           ),
          .r2b_wrap           (r2b_wrap           ),
          .r2b_wrap           (r2b_wrap           ),
          .r2b_ba             (r2b_ba             ),
          .r2b_ba             (r2b_ba             ),
          .r2b_raddr          (r2b_raddr          ),
          .r2b_raddr          (r2b_raddr          ),
          .r2b_caddr          (r2b_caddr          ),
          .r2b_caddr          (r2b_caddr          ),
          .r2b_len            (r2b_len            ),
          .r2b_len            (r2b_len            ),
          .r2b_write          (r2b_write          ),
          .r2b_write          (r2b_write          ),
          .b2r_arb_ok         (b2r_arb_ok         ),
          .b2r_arb_ok         (b2r_arb_ok         ),
          .b2r_ack            (b2r_ack            ),
          .b2r_ack            (b2r_ack            ),
 
 
      /* Transfer request to xfr_ctl */
      /* Transfer request to xfr_ctl */
          .b2x_idle           (b2x_idle           ),
          .b2x_idle           (b2x_idle           ),
          .b2x_req            (b2x_req            ),
          .b2x_req            (b2x_req            ),
          .b2x_start          (b2x_start          ),
          .b2x_start          (b2x_start          ),
          .b2x_last           (b2x_last           ),
          .b2x_last           (b2x_last           ),
          .b2x_wrap           (b2x_wrap           ),
          .b2x_wrap           (b2x_wrap           ),
          .b2x_id             (b2x_id             ),
          .b2x_id             (b2x_id             ),
          .b2x_ba             (b2x_ba             ),
          .b2x_ba             (b2x_ba             ),
          .b2x_addr           (b2x_addr           ),
          .b2x_addr           (b2x_addr           ),
          .b2x_len            (b2x_len            ),
          .b2x_len            (b2x_len            ),
          .b2x_cmd            (b2x_cmd            ),
          .b2x_cmd            (b2x_cmd            ),
          .x2b_ack            (x2b_ack            ),
          .x2b_ack            (x2b_ack            ),
 
 
      /* Status from xfr_ctl */
      /* Status from xfr_ctl */
          .b2x_tras_ok        (b2x_tras_ok        ),
          .b2x_tras_ok        (b2x_tras_ok        ),
          .x2b_refresh        (x2b_refresh        ),
          .x2b_refresh        (x2b_refresh        ),
          .x2b_pre_ok         (x2b_pre_ok         ),
          .x2b_pre_ok         (x2b_pre_ok         ),
          .x2b_act_ok         (x2b_act_ok         ),
          .x2b_act_ok         (x2b_act_ok         ),
          .x2b_rdok           (x2b_rdok           ),
          .x2b_rdok           (x2b_rdok           ),
          .x2b_wrok           (x2b_wrok           ),
          .x2b_wrok           (x2b_wrok           ),
 
 
      /* for generate cuurent xfr address msb */
      /* for generate cuurent xfr address msb */
          .sdr_dev_config     (cfg_sdr_dev_config ),
          .sdr_dev_config     (cfg_sdr_dev_config ),
          .sdr_req_norm_dma_last(app_req_dma_last_int),
          .sdr_req_norm_dma_last(app_req_dma_last_int),
          .xfr_bank_sel       (xfr_bank_sel       ),
          .xfr_bank_sel       (xfr_bank_sel       ),
          .xfr_addr_msb       (xfr_addr_msb       ),
          .xfr_addr_msb       (xfr_addr_msb       ),
 
 
       /* SDRAM Timing */
       /* SDRAM Timing */
          .tras_delay         (cfg_sdr_tras_d     ),
          .tras_delay         (cfg_sdr_tras_d     ),
          .trp_delay          (cfg_sdr_trp_d      ),
          .trp_delay          (cfg_sdr_trp_d      ),
          .trcd_delay         (cfg_sdr_trcd_d     )
          .trcd_delay         (cfg_sdr_trcd_d     )
      );
      );
 
 
   /****************************************************************************/
   /****************************************************************************/
   // Instantiate sdr_xfr_ctl
   // Instantiate sdr_xfr_ctl
   // This module takes requests from sdr_bank_ctl, runs the transfer and
   // This module takes requests from sdr_bank_ctl, runs the transfer and
   // controls data flow to/from the app. At the end of the transfer it issues a
   // controls data flow to/from the app. At the end of the transfer it issues a
   // burst terminate if not at the end of a burst and another command to this
   // burst terminate if not at the end of a burst and another command to this
   // bank is not available.
   // bank is not available.
 
 
sdrc_xfr_ctl #(.SDR_DW(SDR_DW) ,  .SDR_BW(SDR_BW)) u_xfr_ctl (
sdrc_xfr_ctl #(.SDR_DW(SDR_DW) ,  .SDR_BW(SDR_BW)) u_xfr_ctl (
          .clk                (clk          ),
          .clk                (clk          ),
          .reset_n            (reset_n            ),
          .reset_n            (reset_n            ),
 
 
      /* Transfer request from bank_ctl */
      /* Transfer request from bank_ctl */
          .r2x_idle           (r2x_idle           ),
          .r2x_idle           (r2x_idle           ),
          .b2x_idle           (b2x_idle           ),
          .b2x_idle           (b2x_idle           ),
          .b2x_req            (b2x_req            ),
          .b2x_req            (b2x_req            ),
          .b2x_start          (b2x_start          ),
          .b2x_start          (b2x_start          ),
          .b2x_last           (b2x_last           ),
          .b2x_last           (b2x_last           ),
          .b2x_wrap           (b2x_wrap           ),
          .b2x_wrap           (b2x_wrap           ),
          .b2x_id             (b2x_id             ),
          .b2x_id             (b2x_id             ),
          .b2x_ba             (b2x_ba             ),
          .b2x_ba             (b2x_ba             ),
          .b2x_addr           (b2x_addr           ),
          .b2x_addr           (b2x_addr           ),
          .b2x_len            (b2x_len            ),
          .b2x_len            (b2x_len            ),
          .b2x_cmd            (b2x_cmd            ),
          .b2x_cmd            (b2x_cmd            ),
          .x2b_ack            (x2b_ack            ),
          .x2b_ack            (x2b_ack            ),
 
 
       /* Status to bank_ctl, req_gen */
       /* Status to bank_ctl, req_gen */
          .b2x_tras_ok        (b2x_tras_ok        ),
          .b2x_tras_ok        (b2x_tras_ok        ),
          .x2b_refresh        (x2b_refresh        ),
          .x2b_refresh        (x2b_refresh        ),
          .x2b_pre_ok         (x2b_pre_ok         ),
          .x2b_pre_ok         (x2b_pre_ok         ),
          .x2b_act_ok         (x2b_act_ok         ),
          .x2b_act_ok         (x2b_act_ok         ),
          .x2b_rdok           (x2b_rdok           ),
          .x2b_rdok           (x2b_rdok           ),
          .x2b_wrok           (x2b_wrok           ),
          .x2b_wrok           (x2b_wrok           ),
 
 
       /* SDRAM I/O */
       /* SDRAM I/O */
          .sdr_cs_n           (sdr_cs_n           ),
          .sdr_cs_n           (sdr_cs_n           ),
          .sdr_cke            (sdr_cke            ),
          .sdr_cke            (sdr_cke            ),
          .sdr_ras_n          (sdr_ras_n          ),
          .sdr_ras_n          (sdr_ras_n          ),
          .sdr_cas_n          (sdr_cas_n          ),
          .sdr_cas_n          (sdr_cas_n          ),
          .sdr_we_n           (sdr_we_n           ),
          .sdr_we_n           (sdr_we_n           ),
          .sdr_dqm            (sdr_dqm            ),
          .sdr_dqm            (sdr_dqm            ),
          .sdr_ba             (sdr_ba             ),
          .sdr_ba             (sdr_ba             ),
          .sdr_addr           (sdr_addr           ),
          .sdr_addr           (sdr_addr           ),
          .sdr_din            (pad_sdr_din        ),
          .sdr_din            (pad_sdr_din        ),
          .sdr_dout           (sdr_dout_int       ),
          .sdr_dout           (sdr_dout_int       ),
          .sdr_den_n          (sdr_den_n_int      ),
          .sdr_den_n          (sdr_den_n_int      ),
 
 
      /* Data Flow to the app */
      /* Data Flow to the app */
          .x2a_rdstart        (xfr_rdstart        ),
          .x2a_rdstart        (xfr_rdstart        ),
          .x2a_wrstart        (xfr_wrstart        ),
          .x2a_wrstart        (xfr_wrstart        ),
          .x2a_id             (xfr_id             ),
          .x2a_id             (xfr_id             ),
          .x2a_rdlast         (xfr_rdlast         ),
          .x2a_rdlast         (xfr_rdlast         ),
          .x2a_wrlast         (xfr_wrlast         ),
          .x2a_wrlast         (xfr_wrlast         ),
          .app_wrdt           (add_wr_data_int    ),
          .app_wrdt           (add_wr_data_int    ),
          .app_wren_n         (app_wr_en_n_int    ),
          .app_wren_n         (app_wr_en_n_int    ),
          .x2a_wrnext         (app_wr_next_int    ),
          .x2a_wrnext         (app_wr_next_int    ),
          .x2a_rddt           (app_rd_data_int    ),
          .x2a_rddt           (app_rd_data_int    ),
          .x2a_rdok           (app_rd_valid_int   ),
          .x2a_rdok           (app_rd_valid_int   ),
          .sdr_init_done      (sdr_init_done      ),
          .sdr_init_done      (sdr_init_done      ),
 
 
      /* SDRAM Parameters */
      /* SDRAM Parameters */
          .sdram_enable       (cfg_sdr_en         ),
          .sdram_enable       (cfg_sdr_en         ),
          .sdram_mode_reg     (cfg_sdr_mode_reg   ),
          .sdram_mode_reg     (cfg_sdr_mode_reg   ),
 
 
      /* current xfr bank */
      /* current xfr bank */
          .xfr_bank_sel       (xfr_bank_sel       ),
          .xfr_bank_sel       (xfr_bank_sel       ),
 
 
      /* SDRAM Timing */
      /* SDRAM Timing */
          .cas_latency        (cfg_sdr_cas        ),
          .cas_latency        (cfg_sdr_cas        ),
          .trp_delay          (cfg_sdr_trp_d      ),
          .trp_delay          (cfg_sdr_trp_d      ),
          .trcar_delay        (cfg_sdr_trcar_d    ),
          .trcar_delay        (cfg_sdr_trcar_d    ),
          .twr_delay          (cfg_sdr_twr_d      ),
          .twr_delay          (cfg_sdr_twr_d      ),
          .rfsh_time          (cfg_sdr_rfsh       ),
          .rfsh_time          (cfg_sdr_rfsh       ),
          .rfsh_rmax          (cfg_sdr_rfmax      )
          .rfsh_rmax          (cfg_sdr_rfmax      )
    );
    );
 
 
sdrc_bs_convert #(.SDR_DW(SDR_DW) ,  .SDR_BW(SDR_BW)) u_bs_convert (
sdrc_bs_convert #(.SDR_DW(SDR_DW) ,  .SDR_BW(SDR_BW)) u_bs_convert (
          .clk                (clk          ),
          .clk                (clk          ),
          .reset_n            (reset_n            ),
          .reset_n            (reset_n            ),
          .sdr_width          (sdr_width          ),
          .sdr_width          (sdr_width          ),
 
 
          .app_req_addr       (app_req_addr       ),
          .app_req_addr       (app_req_addr       ),
          .app_req_addr_int   (app_req_addr_int   ),
          .app_req_addr_int   (app_req_addr_int   ),
          .app_req_len        (app_req_len        ),
          .app_req_len        (app_req_len        ),
          .app_req_len_int    (app_req_len_int    ),
          .app_req_len_int    (app_req_len_int    ),
          .app_sdr_req        (app_req            ),
          .app_sdr_req        (app_req            ),
          .app_sdr_req_int    (app_req_int        ),
          .app_sdr_req_int    (app_req_int        ),
          .app_req_dma_last   (app_req_dma_last   ),
          .app_req_dma_last   (app_req_dma_last   ),
          .app_req_dma_last_int(app_req_dma_last_int),
          .app_req_dma_last_int(app_req_dma_last_int),
          .app_req_wr_n       (app_req_wr_n       ),
          .app_req_wr_n       (app_req_wr_n       ),
          .app_req_ack_int    (app_req_ack_int    ),
          .app_req_ack_int    (app_req_ack_int    ),
          .app_req_ack        (app_req_ack        ),
          .app_req_ack        (app_req_ack        ),
 
 
          .app_wr_data        (app_wr_data        ),
          .app_wr_data        (app_wr_data        ),
          .app_wr_data_int    (add_wr_data_int    ),
          .app_wr_data_int    (add_wr_data_int    ),
          .app_wr_en_n        (app_wr_en_n        ),
          .app_wr_en_n        (app_wr_en_n        ),
          .app_wr_en_n_int    (app_wr_en_n_int    ),
          .app_wr_en_n_int    (app_wr_en_n_int    ),
          .app_wr_next_int    (app_wr_next_int    ),
          .app_wr_next_int    (app_wr_next_int    ),
          .app_wr_next        (app_wr_next_req    ),
          .app_wr_next        (app_wr_next_req    ),
 
 
          .app_rd_data_int    (app_rd_data_int    ),
          .app_rd_data_int    (app_rd_data_int    ),
          .app_rd_data        (app_rd_data        ),
          .app_rd_data        (app_rd_data        ),
          .app_rd_valid_int   (app_rd_valid_int   ),
          .app_rd_valid_int   (app_rd_valid_int   ),
          .app_rd_valid       (app_rd_valid       )
          .app_rd_valid       (app_rd_valid       )
       );
       );
 
 
endmodule // sdrc_core
endmodule // sdrc_core
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.