Control the activity and status of your FPGA by targeting a memory mapped space inside it.
|
Control the activity and status of your FPGA by targeting a memory mapped space inside it.
|
|
|
Based on:
|
Based on:
|
|
|
-- elements from the GH libraries ( http://opencores.org/project,gh_vhdl_library )
|
-- elements from the GH libraries ( http://opencores.org/project,gh_vhdl_library )
|
-- HLeFevre UART project ( http://opencores.org/project,a_vhd_16550_uart )
|
-- HLeFevre UART project ( http://opencores.org/project,a_vhd_16550_uart )
|
|
|
Simple three steps access procedure:
|
Simple three steps access procedure:
|
|
|
-- Write words of 2 bytes address and 4 bytes data.
|
-- Write words of 2 bytes address and 4 bytes data.
|
-- Ask for an update targeting the update register (default 0x8000 0x00000000)
|
-- Ask for an update targeting the update register (default 0x8000 0x00000000)
|
-- Read words of 2 bytes address and 4 bytes data.
|
-- Read words of 2 bytes address and 4 bytes data.
|
|
|
The code comes plug and play:
|
The code comes plug and play:
|
* the whole uart initialization process is automatic
|
* the whole uart initialization process is automatic
|
* 4 pins interface to the outsideworld: serial tx, serial rx, uart clock, hard reset
|
* 4 pins interface to the outsideworld: serial tx, serial rx, uart clock, hard reset
|
* up to 2^16 32 bit wide registers for user logic control and monitor
|
* up to 2^16 32 bit wide registers for user logic control and monitor
|
|
|
Declare the registers you want to read and write in the top level entity. the rest will be handled automatically by FSMs.
|
Declare the registers you want to read and write in the top level entity. the rest will be handled automatically by FSMs.
|
|
|
Almost no documentation is required.
|
Almost no documentation is required.
|
no knowledge of the internals of the core required.
|
no knowledge of the internals of the core required.
|
The top entity is self-explanatory.
|
The top entity is self-explanatory.
|
|
|
Use RealTerm to simply send and receive HEX commands ( http://realterm.sourceforge.net/ ).
|
Remotely control the logic from a PC:
|
TCP/IP to UART bridging is just around the corner.
|
~ Under Windows use RealTerm to simply send and receive HEX commands ( http://realterm.sourceforge.net/ ).
|
|
~ TCP/IP to UART bridging is just around the corner using inexpensive external devices.
|
|
|
crossplatform compatible (tested on Xilinx Virtex-5 and Altera Stratix-4 devices). Tested up to 1 Mbps with a 29.4912 MHz oscillator.
|
crossplatform compatible (tested on Xilinx Virtex-5 and Altera Stratix-4 devices). Tested up to 1 Mbps with a 29.4912 MHz oscillator.
|
|
|
## Feeback:
|
## Feeback:
|
Give comments and feedback using the official core thread on the OpenCores forum:
|
Give comments and feedback using the official core thread on the OpenCores forum:
|
|
|