----------------------------------------------------------------------------------
|
----------------------------------------------------------------------------------
|
-- Company:
|
-- Company:
|
-- Engineer: Peter Fall
|
-- Engineer: Peter Fall
|
--
|
--
|
-- Create Date: 12:00:04 05/31/2011
|
-- Create Date: 12:00:04 05/31/2011
|
-- Design Name:
|
-- Design Name:
|
-- Module Name: arp_rx - Behavioral
|
-- Module Name: arp_rx - Behavioral
|
-- Project Name:
|
-- Project Name:
|
-- Target Devices:
|
-- Target Devices:
|
-- Tool versions:
|
-- Tool versions:
|
-- Description:
|
-- Description:
|
-- handle receipt of arp pkt
|
-- handle receipt of arp pkt
|
-- ignores other types of pkt
|
-- ignores other types of pkt
|
--
|
--
|
-- When it receives an ARP pkt that is either addressed to our IP or is a global request,
|
-- When it receives an ARP pkt that is either addressed to our IP or is a global request,
|
-- it outputs for a single clock cycle either recv_who_has or recv_I_have along
|
-- it outputs for a single clock cycle either recv_who_has or recv_I_have along
|
-- with associated mac or arp entry data.
|
-- with associated mac or arp entry data.
|
--
|
--
|
-- Note that if recv who_has and we have it, then we also assert I_have so that we can cache the rev lookup
|
-- Note that if recv who_has and we have it, then we also assert I_have so that we can cache the rev lookup
|
-- on the expectation that we will want to reply to this host.
|
-- on the expectation that we will want to reply to this host.
|
--
|
--
|
-- Dependencies:
|
-- Dependencies:
|
--
|
--
|
-- Revision:
|
-- Revision:
|
-- Revision 0.01 - File Created - refactored from arp v0.02 module
|
-- Revision 0.01 - File Created - refactored from arp v0.02 module
|
-- Additional Comments:
|
-- Additional Comments:
|
--
|
--
|
----------------------------------------------------------------------------------
|
----------------------------------------------------------------------------------
|
library IEEE;
|
library IEEE;
|
use IEEE.STD_LOGIC_1164.all;
|
use IEEE.STD_LOGIC_1164.all;
|
use IEEE.NUMERIC_STD.all;
|
use IEEE.NUMERIC_STD.all;
|
use work.arp_types.all;
|
use work.arp_types.all;
|
|
|
entity arp_rx is
|
entity arp_rx is
|
port (
|
port (
|
-- MAC layer RX signals
|
-- MAC layer RX signals
|
data_in : in std_logic_vector (7 downto 0); -- ethernet frame (from dst mac addr through to last byte of frame)
|
data_in : in std_logic_vector (7 downto 0); -- ethernet frame (from dst mac addr through to last byte of frame)
|
data_in_valid : in std_logic; -- indicates data_in valid on clock
|
data_in_valid : in std_logic; -- indicates data_in valid on clock
|
data_in_last : in std_logic; -- indicates last data in frame
|
data_in_last : in std_logic; -- indicates last data in frame
|
-- ARP output signals
|
-- ARP output signals
|
recv_who_has : out std_logic; -- pulse will be latched
|
recv_who_has : out std_logic; -- pulse will be latched
|
arp_entry_for_who_has : out arp_entry_t; -- target for who_has msg (Iie, who to reply to)
|
arp_entry_for_who_has : out arp_entry_t; -- target for who_has msg (Iie, who to reply to)
|
recv_I_have : out std_logic; -- pulse will be latched
|
recv_I_have : out std_logic; -- pulse will be latched
|
arp_entry_for_I_have : out arp_entry_t; -- arp target for I_have msg
|
arp_entry_for_I_have : out arp_entry_t; -- arp target for I_have msg
|
-- control and status signals
|
-- control and status signals
|
req_count : out std_logic_vector(7 downto 0); -- count of arp pkts received
|
req_count : out std_logic_vector(7 downto 0); -- count of arp pkts received
|
-- system signals
|
-- system signals
|
our_ip_address : in std_logic_vector (31 downto 0);
|
our_ip_address : in std_logic_vector (31 downto 0);
|
rx_clk : in std_logic;
|
rx_clk : in std_logic;
|
reset : in std_logic
|
reset : in std_logic
|
);
|
);
|
end arp_rx;
|
end arp_rx;
|
|
|
|
|
architecture Behavioral of arp_rx is
|
architecture Behavioral of arp_rx is
|
|
|
type rx_state_t is (IDLE, PARSE, PROCESS_ARP, WAIT_END);
|
type rx_state_t is (IDLE, PARSE, PROCESS_ARP, WAIT_END);
|
type rx_event_t is (NO_EVENT, DATA);
|
type rx_event_t is (NO_EVENT, DATA);
|
type count_mode_t is (RST, INCR, HOLD);
|
type count_mode_t is (RST, INCR, HOLD);
|
type arp_oper_t is (NOP, REQUEST, REPLY);
|
type arp_oper_t is (NOP, REQUEST, REPLY);
|
|
|
type tx_state_type is (IDLE, WAIT_MAC, SEND);
|
type tx_state_type is (IDLE, WAIT_MAC, SEND);
|
|
|
-- state variables
|
-- state variables
|
signal send_request_needed : std_logic;
|
signal send_request_needed : std_logic;
|
signal tx_mac_chn_reqd : std_logic;
|
signal tx_mac_chn_reqd : std_logic;
|
|
|
signal rx_state : rx_state_t;
|
signal rx_state : rx_state_t;
|
signal rx_count : unsigned (7 downto 0);
|
signal rx_count : unsigned (7 downto 0);
|
signal arp_operation : arp_oper_t;
|
signal arp_operation : arp_oper_t;
|
signal arp_req_count : unsigned (7 downto 0);
|
signal arp_req_count : unsigned (7 downto 0);
|
signal new_arp_entry : arp_entry_t;
|
signal new_arp_entry : arp_entry_t;
|
|
|
-- FIXME - remove these debug state signals
|
-- FIXME - remove these debug state signals
|
signal arp_err_data : std_logic_vector (7 downto 0);
|
signal arp_err_data : std_logic_vector (7 downto 0);
|
signal set_err_data : std_logic;
|
signal set_err_data : std_logic;
|
|
|
attribute keep : string;
|
attribute keep : string;
|
attribute keep of arp_err_data : signal is "true";
|
attribute keep of arp_err_data : signal is "true";
|
|
|
|
|
-- rx control signals
|
-- rx control signals
|
signal next_rx_state : rx_state_t;
|
signal next_rx_state : rx_state_t;
|
signal set_rx_state : std_logic;
|
signal set_rx_state : std_logic;
|
signal rx_event : rx_event_t;
|
signal rx_event : rx_event_t;
|
signal rx_count_mode : count_mode_t;
|
signal rx_count_mode : count_mode_t;
|
signal set_arp_oper : std_logic;
|
signal set_arp_oper : std_logic;
|
signal arp_oper_set_val : arp_oper_t;
|
signal arp_oper_set_val : arp_oper_t;
|
signal dataval : std_logic_vector (7 downto 0);
|
signal dataval : std_logic_vector (7 downto 0);
|
signal count_arp_rcvd : std_logic;
|
signal count_arp_rcvd : std_logic;
|
|
|
signal set_mac5 : std_logic;
|
signal set_mac5 : std_logic;
|
signal set_mac4 : std_logic;
|
signal set_mac4 : std_logic;
|
signal set_mac3 : std_logic;
|
signal set_mac3 : std_logic;
|
signal set_mac2 : std_logic;
|
signal set_mac2 : std_logic;
|
signal set_mac1 : std_logic;
|
signal set_mac1 : std_logic;
|
signal set_mac0 : std_logic;
|
signal set_mac0 : std_logic;
|
|
|
signal set_ip3 : std_logic;
|
signal set_ip3 : std_logic;
|
signal set_ip2 : std_logic;
|
signal set_ip2 : std_logic;
|
signal set_ip1 : std_logic;
|
signal set_ip1 : std_logic;
|
signal set_ip0 : std_logic;
|
signal set_ip0 : std_logic;
|
|
|
|
|
|
|
-- function to determine whether the rx pkt is an arp pkt and whether we want to process it
|
-- function to determine whether the rx pkt is an arp pkt and whether we want to process it
|
-- Returns 1 if we should discard
|
-- Returns 1 if we should discard
|
-- The following will make us ignore the frame (all values hexadecimal):
|
-- The following will make us ignore the frame (all values hexadecimal):
|
-- PDU type /= 0806
|
-- PDU type /= 0806
|
-- Protocol Type /= 0800
|
-- Protocol Type /= 0800
|
-- Hardware Type /= 1
|
-- Hardware Type /= 1
|
-- Hardware Length /= 6
|
-- Hardware Length /= 6
|
-- Protocol Length /= 4
|
-- Protocol Length /= 4
|
-- Operation /= 1 or 2
|
-- Operation /= 1 or 2
|
-- Target IP /= our IP (i.er. message is not meant for us)
|
-- Target IP /= our IP (i.er. message is not meant for us)
|
--
|
--
|
function not_our_arp(data : std_logic_vector; count : unsigned; our_ip : std_logic_vector) return std_logic is
|
function not_our_arp(data : std_logic_vector; count : unsigned; our_ip : std_logic_vector) return std_logic is
|
begin
|
begin
|
if
|
if
|
(count = 12 and data /= x"08") or -- PDU type 0806 : ARP
|
(count = 12 and data /= x"08") or -- PDU type 0806 : ARP
|
(count = 13 and data /= x"06") or
|
(count = 13 and data /= x"06") or
|
(count = 14 and data /= x"00") or -- HW type 1 : eth
|
(count = 14 and data /= x"00") or -- HW type 1 : eth
|
(count = 15 and data /= x"01") or
|
(count = 15 and data /= x"01") or
|
(count = 16 and data /= x"08") or -- Protocol 0800 : IP
|
(count = 16 and data /= x"08") or -- Protocol 0800 : IP
|
(count = 17 and data /= x"00") or
|
(count = 17 and data /= x"00") or
|
(count = 18 and data /= x"06") or -- HW Length 6
|
(count = 18 and data /= x"06") or -- HW Length 6
|
(count = 19 and data /= x"04") or -- protocol length 4
|
(count = 19 and data /= x"04") or -- protocol length 4
|
(count = 20 and data /= x"00") or -- operation 1 or 2 (req or reply)
|
(count = 20 and data /= x"00") or -- operation 1 or 2 (req or reply)
|
(count = 21 and data /= x"01" and data /= x"02") or
|
(count = 21 and data /= x"01" and data /= x"02") or
|
(count = 38 and data /= our_ip(31 downto 24)) or -- target IP is ours
|
(count = 38 and data /= our_ip(31 downto 24)) or -- target IP is ours
|
(count = 39 and data /= our_ip(23 downto 16)) or
|
(count = 39 and data /= our_ip(23 downto 16)) or
|
(count = 40 and data /= our_ip(15 downto 8)) or
|
(count = 40 and data /= our_ip(15 downto 8)) or
|
(count = 41 and data /= our_ip(7 downto 0))
|
(count = 41 and data /= our_ip(7 downto 0))
|
then
|
then
|
return '1';
|
return '1';
|
else
|
else
|
return '0';
|
return '0';
|
end if;
|
end if;
|
end function not_our_arp;
|
end function not_our_arp;
|
|
|
begin
|
begin
|
|
|
rx_combinatorial : process (
|
rx_combinatorial : process (
|
-- input signals
|
-- input signals
|
data_in, data_in_valid, data_in_last, our_ip_address,
|
data_in, data_in_valid, data_in_last, our_ip_address,
|
-- state variables
|
-- state variables
|
rx_state, rx_count, arp_operation, arp_req_count, arp_err_data, new_arp_entry,
|
rx_state, rx_count, arp_operation, arp_req_count, arp_err_data, new_arp_entry,
|
-- control signals
|
-- control signals
|
next_rx_state, set_rx_state, rx_event, rx_count_mode, set_arp_oper, arp_oper_set_val,
|
next_rx_state, set_rx_state, rx_event, rx_count_mode, set_arp_oper, arp_oper_set_val,
|
dataval, set_mac5, set_mac4, set_mac3, set_mac2, set_mac1, set_mac0, set_ip3, set_ip2, set_ip1, set_ip0, set_err_data,
|
dataval, set_mac5, set_mac4, set_mac3, set_mac2, set_mac1, set_mac0, set_ip3, set_ip2, set_ip1, set_ip0, set_err_data,
|
count_arp_rcvd
|
count_arp_rcvd
|
)
|
)
|
begin
|
begin
|
-- set output followers
|
-- set output followers
|
req_count <= std_logic_vector(arp_req_count);
|
req_count <= std_logic_vector(arp_req_count);
|
|
|
-- set defaults for combinatorial outputs
|
-- set defaults for combinatorial outputs
|
recv_who_has <= '0';
|
recv_who_has <= '0';
|
arp_entry_for_who_has.ip <= (others => '0');
|
arp_entry_for_who_has.ip <= (others => '0');
|
arp_entry_for_who_has.mac <= (others => '0');
|
arp_entry_for_who_has.mac <= (others => '0');
|
recv_I_have <= '0';
|
recv_I_have <= '0';
|
arp_entry_for_I_have.ip <= (others => '0');
|
arp_entry_for_I_have.ip <= (others => '0');
|
arp_entry_for_I_have.mac <= (others => '0');
|
arp_entry_for_I_have.mac <= (others => '0');
|
|
|
-- set signal defaults
|
-- set signal defaults
|
next_rx_state <= IDLE;
|
next_rx_state <= IDLE;
|
set_rx_state <= '0';
|
set_rx_state <= '0';
|
rx_event <= NO_EVENT;
|
rx_event <= NO_EVENT;
|
rx_count_mode <= HOLD;
|
rx_count_mode <= HOLD;
|
set_arp_oper <= '0';
|
set_arp_oper <= '0';
|
arp_oper_set_val <= NOP;
|
arp_oper_set_val <= NOP;
|
dataval <= (others => '0');
|
dataval <= (others => '0');
|
set_mac5 <= '0';
|
set_mac5 <= '0';
|
set_mac4 <= '0';
|
set_mac4 <= '0';
|
set_mac3 <= '0';
|
set_mac3 <= '0';
|
set_mac2 <= '0';
|
set_mac2 <= '0';
|
set_mac1 <= '0';
|
set_mac1 <= '0';
|
set_mac0 <= '0';
|
set_mac0 <= '0';
|
set_ip3 <= '0';
|
set_ip3 <= '0';
|
set_ip2 <= '0';
|
set_ip2 <= '0';
|
set_ip1 <= '0';
|
set_ip1 <= '0';
|
set_ip0 <= '0';
|
set_ip0 <= '0';
|
count_arp_rcvd <= '0';
|
count_arp_rcvd <= '0';
|
set_err_data <= '0';
|
set_err_data <= '0';
|
|
|
-- determine event (if any)
|
-- determine event (if any)
|
if data_in_valid = '1' then
|
if data_in_valid = '1' then
|
rx_event <= DATA;
|
rx_event <= DATA;
|
end if;
|
end if;
|
|
|
-- RX FSM
|
-- RX FSM
|
case rx_state is
|
case rx_state is
|
when IDLE =>
|
when IDLE =>
|
rx_count_mode <= RST;
|
rx_count_mode <= RST;
|
case rx_event is
|
case rx_event is
|
when NO_EVENT => -- (nothing to do)
|
when NO_EVENT => -- (nothing to do)
|
when DATA =>
|
when DATA =>
|
next_rx_state <= PARSE;
|
next_rx_state <= PARSE;
|
set_rx_state <= '1';
|
set_rx_state <= '1';
|
rx_count_mode <= INCR;
|
rx_count_mode <= INCR;
|
end case;
|
end case;
|
|
|
when PARSE =>
|
when PARSE =>
|
case rx_event is
|
case rx_event is
|
when NO_EVENT => -- (nothing to do)
|
when NO_EVENT => -- (nothing to do)
|
when DATA =>
|
when DATA =>
|
rx_count_mode <= INCR;
|
rx_count_mode <= INCR;
|
-- handle early frame termination
|
-- handle early frame termination
|
if data_in_last = '1' then
|
if data_in_last = '1' then
|
next_rx_state <= IDLE;
|
next_rx_state <= IDLE;
|
rx_count_mode <= RST;
|
rx_count_mode <= RST;
|
set_rx_state <= '1';
|
set_rx_state <= '1';
|
--else
|
--else
|
end if;
|
end if;
|
-- check for end of frame. Also, detect and discard if not our frame
|
-- check for end of frame. Also, detect and discard if not our frame
|
if rx_count = 41 then -- TB 2013-01-14 15:09:45 was 42
|
if not_our_arp(data_in, rx_count, our_ip_address) = '1' then
|
next_rx_state <= PROCESS_ARP;
|
|
set_rx_state <= '1';
|
|
elsif not_our_arp(data_in, rx_count, our_ip_address) = '1' then
|
|
dataval <= data_in;
|
dataval <= data_in;
|
set_err_data <= '1';
|
set_err_data <= '1';
|
next_rx_state <= WAIT_END;
|
next_rx_state <= WAIT_END;
|
set_rx_state <= '1';
|
set_rx_state <= '1';
|
elsif rx_count = 21 then
|
|
-- capture ARP operation
|
else
|
case data_in is
|
case (to_integer(rx_count)) is
|
|
when 41 =>
|
|
next_rx_state <= PROCESS_ARP;
|
|
set_rx_state <= '1';
|
|
when 21 => -- capture ARP operation
|
|
case (data_in) is
|
when x"01" =>
|
when x"01" =>
|
arp_oper_set_val <= REQUEST;
|
arp_oper_set_val <= REQUEST;
|
set_arp_oper <= '1';
|
set_arp_oper <= '1';
|
when x"02" =>
|
when x"02" =>
|
arp_oper_set_val <= REPLY;
|
arp_oper_set_val <= REPLY;
|
set_arp_oper <= '1';
|
set_arp_oper <= '1';
|
when others => -- ignore other values
|
when others => -- ignore other values
|
end case;
|
end case;
|
-- capture source mac addr
|
-- capture source mac addr
|
elsif rx_count = 22 then
|
when 22 =>
|
set_mac5 <= '1';
|
set_mac5 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
elsif rx_count = 23 then
|
when 23 =>
|
set_mac4 <= '1';
|
set_mac4 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
elsif rx_count = 24 then
|
when 24 =>
|
set_mac3 <= '1';
|
set_mac3 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
elsif rx_count = 25 then
|
when 25 =>
|
set_mac2 <= '1';
|
set_mac2 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
elsif rx_count = 26 then
|
when 26 =>
|
set_mac1 <= '1';
|
set_mac1 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
elsif rx_count = 27 then
|
when 27 =>
|
set_mac0 <= '1';
|
set_mac0 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
-- capture source ip addr
|
when 28 => -- capture source ip addr
|
elsif rx_count = 28 then
|
|
set_ip3 <= '1';
|
set_ip3 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
elsif rx_count = 29 then
|
when 29 =>
|
set_ip2 <= '1';
|
set_ip2 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
elsif rx_count = 30 then
|
when 30 =>
|
set_ip1 <= '1';
|
set_ip1 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
elsif rx_count = 31 then
|
when 31 =>
|
set_ip0 <= '1';
|
set_ip0 <= '1';
|
dataval <= data_in;
|
dataval <= data_in;
|
|
when others => -- do nothing
|
|
end case;
|
end if;
|
end if;
|
-- end if;
|
-- end if;
|
end case;
|
end case;
|
|
|
when PROCESS_ARP =>
|
when PROCESS_ARP =>
|
next_rx_state <= WAIT_END;
|
next_rx_state <= WAIT_END;
|
set_rx_state <= '1';
|
set_rx_state <= '1';
|
arp_oper_set_val <= NOP;
|
arp_oper_set_val <= NOP;
|
set_arp_oper <= '1';
|
set_arp_oper <= '1';
|
case arp_operation is
|
case arp_operation is
|
when NOP => -- (nothing to do)
|
when NOP => -- (nothing to do)
|
when REQUEST =>
|
when REQUEST =>
|
count_arp_rcvd <= '1';
|
count_arp_rcvd <= '1';
|
recv_who_has <= '1';
|
recv_who_has <= '1';
|
arp_entry_for_who_has <= new_arp_entry;
|
arp_entry_for_who_has <= new_arp_entry;
|
-- setting I_Have as well allows us to cache the remote node's entry immediately
|
-- setting I_Have as well allows us to cache the remote node's entry immediately
|
recv_I_have <= '1';
|
recv_I_have <= '1';
|
arp_entry_for_I_have <= new_arp_entry;
|
arp_entry_for_I_have <= new_arp_entry;
|
when REPLY =>
|
when REPLY =>
|
count_arp_rcvd <= '1';
|
count_arp_rcvd <= '1';
|
recv_I_have <= '1';
|
recv_I_have <= '1';
|
arp_entry_for_I_have <= new_arp_entry;
|
arp_entry_for_I_have <= new_arp_entry;
|
end case;
|
end case;
|
|
|
when WAIT_END =>
|
when WAIT_END =>
|
case rx_event is
|
case rx_event is
|
when NO_EVENT => -- (nothing to do)
|
when NO_EVENT => -- (nothing to do)
|
when DATA =>
|
when DATA =>
|
if data_in_last = '1' then
|
if data_in_last = '1' then
|
next_rx_state <= IDLE;
|
next_rx_state <= IDLE;
|
rx_count_mode <= RST;
|
rx_count_mode <= RST;
|
set_rx_state <= '1';
|
set_rx_state <= '1';
|
end if;
|
end if;
|
end case;
|
end case;
|
|
|
end case;
|
end case;
|
|
|
end process;
|
end process;
|
|
|
rx_sequential : process (rx_clk)
|
rx_sequential : process (rx_clk)
|
begin
|
begin
|
if rising_edge(rx_clk) then
|
if rising_edge(rx_clk) then
|
if reset = '1' then
|
if reset = '1' then
|
-- reset state variables
|
-- reset state variables
|
rx_state <= IDLE;
|
rx_state <= IDLE;
|
rx_count <= x"00";
|
rx_count <= x"00";
|
arp_operation <= NOP;
|
arp_operation <= NOP;
|
arp_req_count <= x"00";
|
arp_req_count <= x"00";
|
arp_err_data <= (others => '0');
|
arp_err_data <= (others => '0');
|
else
|
else
|
-- Next rx_state processing
|
-- Next rx_state processing
|
if set_rx_state = '1' then
|
if set_rx_state = '1' then
|
rx_state <= next_rx_state;
|
rx_state <= next_rx_state;
|
else
|
else
|
rx_state <= rx_state;
|
rx_state <= rx_state;
|
end if;
|
end if;
|
|
|
-- rx_count processing
|
-- rx_count processing
|
case rx_count_mode is
|
case rx_count_mode is
|
when RST =>
|
when RST =>
|
rx_count <= x"00";
|
rx_count <= x"00";
|
when INCR =>
|
when INCR =>
|
rx_count <= rx_count + 1;
|
rx_count <= rx_count + 1;
|
when HOLD =>
|
when HOLD =>
|
rx_count <= rx_count;
|
rx_count <= rx_count;
|
end case;
|
end case;
|
|
|
-- err data
|
-- err data
|
if set_err_data = '1' then
|
if set_err_data = '1' then
|
arp_err_data <= data_in;
|
arp_err_data <= data_in;
|
else
|
else
|
arp_err_data <= arp_err_data;
|
arp_err_data <= arp_err_data;
|
end if;
|
end if;
|
|
|
-- arp operation processing
|
-- arp operation processing
|
if set_arp_oper = '1' then
|
if set_arp_oper = '1' then
|
arp_operation <= arp_oper_set_val;
|
arp_operation <= arp_oper_set_val;
|
else
|
else
|
arp_operation <= arp_operation;
|
arp_operation <= arp_operation;
|
end if;
|
end if;
|
|
|
-- source mac capture
|
-- source mac capture
|
if (set_mac5 = '1') then new_arp_entry.mac(47 downto 40) <= dataval; end if;
|
if (set_mac5 = '1') then new_arp_entry.mac(47 downto 40) <= dataval; end if;
|
if (set_mac4 = '1') then new_arp_entry.mac(39 downto 32) <= dataval; end if;
|
if (set_mac4 = '1') then new_arp_entry.mac(39 downto 32) <= dataval; end if;
|
if (set_mac3 = '1') then new_arp_entry.mac(31 downto 24) <= dataval; end if;
|
if (set_mac3 = '1') then new_arp_entry.mac(31 downto 24) <= dataval; end if;
|
if (set_mac2 = '1') then new_arp_entry.mac(23 downto 16) <= dataval; end if;
|
if (set_mac2 = '1') then new_arp_entry.mac(23 downto 16) <= dataval; end if;
|
if (set_mac1 = '1') then new_arp_entry.mac(15 downto 8) <= dataval; end if;
|
if (set_mac1 = '1') then new_arp_entry.mac(15 downto 8) <= dataval; end if;
|
if (set_mac0 = '1') then new_arp_entry.mac(7 downto 0) <= dataval; end if;
|
if (set_mac0 = '1') then new_arp_entry.mac(7 downto 0) <= dataval; end if;
|
|
|
-- source ip capture
|
-- source ip capture
|
if (set_ip3 = '1') then new_arp_entry.ip(31 downto 24) <= dataval; end if;
|
if (set_ip3 = '1') then new_arp_entry.ip(31 downto 24) <= dataval; end if;
|
if (set_ip2 = '1') then new_arp_entry.ip(23 downto 16) <= dataval; end if;
|
if (set_ip2 = '1') then new_arp_entry.ip(23 downto 16) <= dataval; end if;
|
if (set_ip1 = '1') then new_arp_entry.ip(15 downto 8) <= dataval; end if;
|
if (set_ip1 = '1') then new_arp_entry.ip(15 downto 8) <= dataval; end if;
|
if (set_ip0 = '1') then new_arp_entry.ip(7 downto 0) <= dataval; end if;
|
if (set_ip0 = '1') then new_arp_entry.ip(7 downto 0) <= dataval; end if;
|
|
|
-- set arp entry request
|
-- set arp entry request
|
if count_arp_rcvd = '1' then
|
if count_arp_rcvd = '1' then
|
-- count another ARP pkt received
|
-- count another ARP pkt received
|
arp_req_count <= arp_req_count + 1;
|
arp_req_count <= arp_req_count + 1;
|
else
|
else
|
arp_req_count <= arp_req_count;
|
arp_req_count <= arp_req_count;
|
end if;
|
end if;
|
|
|
end if;
|
end if;
|
end if;
|
end if;
|
end process;
|
end process;
|
|
|
end Behavioral;
|
end Behavioral;
|
|
|
|
|