/*!
|
/*!
|
ucecho -- uppercase conversion example for ZTEX USB FPGA Module 1.11
|
ucecho -- uppercase conversion example for ZTEX USB-FPGA Module 1.11b
|
Copyright (C) 2009-2010 ZTEX e.K.
|
Copyright (C) 2009-2011 ZTEX GmbH.
|
http://www.ztex.de
|
http://www.ztex.de
|
|
|
This program is free software; you can redistribute it and/or modify
|
This program is free software; you can redistribute it and/or modify
|
it under the terms of the GNU General Public License version 3 as
|
it under the terms of the GNU General Public License version 3 as
|
published by the Free Software Foundation.
|
published by the Free Software Foundation.
|
|
|
This program is distributed in the hope that it will be useful, but
|
This program is distributed in the hope that it will be useful, but
|
WITHOUT ANY WARRANTY; without even the implied warranty of
|
WITHOUT ANY WARRANTY; without even the implied warranty of
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
General Public License for more details.
|
General Public License for more details.
|
|
|
You should have received a copy of the GNU General Public License
|
You should have received a copy of the GNU General Public License
|
along with this program; if not, see http://www.gnu.org/licenses/.
|
along with this program; if not, see http://www.gnu.org/licenses/.
|
!*/
|
!*/
|
|
|
#include[ztex-conf.h] // Loads the configuration macros, see ztex-conf.h for the available macros
|
#include[ztex-conf.h] // Loads the configuration macros, see ztex-conf.h for the available macros
|
#include[ztex-utils.h] // include basic functions
|
#include[ztex-utils.h] // include basic functions
|
|
|
// configure endpoints 2 and 4, both belong to interface 0 (in/out are from the point of view of the host)
|
// configure endpoints 2 and 4, both belong to interface 0 (in/out are from the point of view of the host)
|
EP_CONFIG(2,0,BULK,IN,512,2);
|
EP_CONFIG(2,0,BULK,IN,512,2);
|
EP_CONFIG(4,0,BULK,OUT,512,2);
|
EP_CONFIG(4,0,BULK,OUT,512,2);
|
|
|
// select ZTEX USB FPGA Module 1.11 as target (required for FPGA configuration)
|
// select ZTEX USB FPGA Module 1.11 as target (required for FPGA configuration)
|
IDENTITY_UFM_1_11(10.12.0.0,0);
|
IDENTITY_UFM_1_11(10.12.0.0,0);
|
|
|
// this product string is also used for identification by the host software
|
// this product string is also used for identification by the host software
|
#define[PRODUCT_STRING]["ucecho example for UFM 1.11"]
|
#define[PRODUCT_STRING]["ucecho example for UFM 1.11"]
|
|
|
// this is called automatically after FPGA configuration
|
// this is called automatically after FPGA configuration
|
#define[POST_FPGA_CONFIG][POST_FPGA_CONFIG
|
#define[POST_FPGA_CONFIG][POST_FPGA_CONFIG
|
OEC = 255;
|
OEC = 255;
|
]
|
]
|
|
|
// include the main part of the firmware kit, define the descriptors, ...
|
// include the main part of the firmware kit, define the descriptors, ...
|
#include[ztex.h]
|
#include[ztex.h]
|
|
|
void main(void)
|
void main(void)
|
{
|
{
|
WORD i,size;
|
WORD i,size;
|
|
|
// init everything
|
// init everything
|
init_USB();
|
init_USB();
|
|
|
EP2CS &= ~bmBIT0; // stall = 0
|
EP2CS &= ~bmBIT0; // stall = 0
|
SYNCDELAY;
|
SYNCDELAY;
|
EP4CS &= ~bmBIT0; // stall = 0
|
EP4CS &= ~bmBIT0; // stall = 0
|
|
|
SYNCDELAY; // first two packages are waste
|
SYNCDELAY; // first two packages are waste
|
EP4BCL = 0x80; // skip package, (re)arm EP4
|
EP4BCL = 0x80; // skip package, (re)arm EP4
|
SYNCDELAY;
|
SYNCDELAY;
|
EP4BCL = 0x80; // skip package, (re)arm EP4
|
EP4BCL = 0x80; // skip package, (re)arm EP4
|
|
|
FIFORESET = 0x80; // reset FIFO
|
FIFORESET = 0x80; // reset FIFO
|
SYNCDELAY;
|
SYNCDELAY;
|
FIFORESET = 2;
|
FIFORESET = 2;
|
SYNCDELAY;
|
SYNCDELAY;
|
FIFORESET = 0x00;
|
FIFORESET = 0x00;
|
SYNCDELAY;
|
SYNCDELAY;
|
|
|
while (1) {
|
while (1) {
|
if ( !(EP4CS & bmBIT2) ) { // EP4 is not empty
|
if ( !(EP4CS & bmBIT2) ) { // EP4 is not empty
|
size = (EP4BCH << 8) | EP4BCL;
|
size = (EP4BCH << 8) | EP4BCL;
|
if ( size>0 && size<=512 && !(EP2CS & bmBIT3)) { // EP2 is not full
|
if ( size>0 && size<=512 && !(EP2CS & bmBIT3)) { // EP2 is not full
|
for ( i=0; i<size; i++ ) {
|
for ( i=0; i<size; i++ ) {
|
IOC = EP4FIFOBUF[i]; // data from EP4 is converted to uppercase by the FPGA ...
|
IOC = EP4FIFOBUF[i]; // data from EP4 is converted to uppercase by the FPGA ...
|
EP2FIFOBUF[i] = IOB; // ... and written back to EP2 buffer
|
EP2FIFOBUF[i] = IOB; // ... and written back to EP2 buffer
|
}
|
}
|
EP2BCH = size >> 8;
|
EP2BCH = size >> 8;
|
SYNCDELAY;
|
SYNCDELAY;
|
EP2BCL = size & 255; // arm EP2
|
EP2BCL = size & 255; // arm EP2
|
}
|
}
|
SYNCDELAY;
|
SYNCDELAY;
|
EP4BCL = 0x80; // (re)arm EP4
|
EP4BCL = 0x80; // (re)arm EP4
|
}
|
}
|
}
|
}
|
}
|
}
|
|
|