To create a disk image:
|
To create a disk image:
|
|
|
1. Convert a 275-byte sector VGI image to 512-byte sectors:
|
1. Convert a 275-byte sector VGI image to 512-byte sectors:
|
vg2flash vgboot.vgi vgboot.bin
|
vg2flash vgboot.vgi vgboot.bin
|
|
|
2. Convert .bin file to Intel Hex (I used Needham's EMP Device Programming
|
2. Convert .bin file to Intel Hex (I used Needham's EMP Device Programming
|
Software.)
|
Software.)
|
|
|
3. Convert to MCS file, use 'packihx':
|
3. Convert to MCS file, use 'packihx':
|
packihx vgboot.hex > vgboot.mcs
|
packihx vgboot.hex > vgboot.mcs
|
|
|
4. Add MCS header to first line of the file, use the first line of vgboot.mcs
|
4. Add MCS header to first line of the file, use the first line of vgboot.mcs
|
as an example.
|
as an example.
|
|
|
4. Program vgboot.mcs to FLASH using the s3esk_picoblaze_nor_flash_programmer
|
4. Program vgboot.mcs to FLASH using the s3esk_picoblaze_nor_flash_programmer
|
from Xilinx. This will take long time (~1 hour) and will end with
|
from Xilinx. This will take long time (~1 hour) and will end with
|
address 199FF0.
|
address 199FF0.
|
|
|
NOTE: If you run into a problem where the Hyperterminal hangs during
|
NOTE: If you run into a problem where the Hyperterminal hangs during
|
the 'P' command, power-cycle your S3E board, re-load the flash
|
the 'P' command, power-cycle your S3E board, re-load the flash
|
programmer, and try again.
|
programmer, and try again.
|
|
|
Other disk images may be obtained from:
|
Other disk images may be obtained from:
|
|
|
wwws.vector-archive.org
|
wwws.vector-archive.org
|
|
|
The SIMH/AltairZ80 Simulator can emulate a Vector Graphic system. The
|
The SIMH/AltairZ80 Simulator can emulate a Vector Graphic system. The
|
simulator and some sample disk images can be downloaded from:
|
simulator and some sample disk images can be downloaded from:
|
|
|
http://www.schorn.ch/cpm/intro.php
|
http://www.schorn.ch/cpm/intro.php
|
|
|
The simulator can be used to create new disk images and copy files to
|
The simulator can be used to create new disk images and copy files to
|
and from disk images.
|
and from disk images.
|
|
|
|
|