-- $Id: rlinklib.vhd 509 2013-04-21 20:46:20Z mueller $
|
-- $Id: rlinklib.vhd 509 2013-04-21 20:46:20Z mueller $
|
--
|
--
|
-- Copyright 2007-2013 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
|
-- Copyright 2007-2013 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
|
--
|
--
|
-- This program is free software; you may redistribute and/or modify it under
|
-- This program is free software; you may redistribute and/or modify it under
|
-- the terms of the GNU General Public License as published by the Free
|
-- the terms of the GNU General Public License as published by the Free
|
-- Software Foundation, either version 2, or at your option any later version.
|
-- Software Foundation, either version 2, or at your option any later version.
|
--
|
--
|
-- This program is distributed in the hope that it will be useful, but
|
-- This program is distributed in the hope that it will be useful, but
|
-- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
|
-- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
|
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
-- for complete details.
|
-- for complete details.
|
--
|
--
|
------------------------------------------------------------------------------
|
------------------------------------------------------------------------------
|
-- Package Name: rlinklib
|
-- Package Name: rlinklib
|
-- Description: Definitions for rlink interface and bus entities
|
-- Description: Definitions for rlink interface and bus entities
|
--
|
--
|
-- Dependencies: -
|
-- Dependencies: -
|
-- Tool versions: xst 8.2, 9.1, 9.2, 11.4, 12.1, 13.3; ghdl 0.18-0.29
|
-- Tool versions: xst 8.2, 9.1, 9.2, 11.4, 12.1, 13.3; ghdl 0.18-0.29
|
--
|
--
|
-- Revision History:
|
-- Revision History:
|
-- Date Rev Version Comment
|
-- Date Rev Version Comment
|
-- 2013-04-21 509 3.3.2 add rlb_moni record definition
|
-- 2013-04-21 509 3.3.2 add rlb_moni record definition
|
-- 2012-12-29 466 3.3.1 add rlink_rlbmux
|
-- 2012-12-29 466 3.3.1 add rlink_rlbmux
|
-- 2011-12-23 444 3.3 CLK_CYCLE now integer
|
-- 2011-12-23 444 3.3 CLK_CYCLE now integer
|
-- 2011-12-21 442 3.2.1 retire old, deprecated interfaces
|
-- 2011-12-21 442 3.2.1 retire old, deprecated interfaces
|
-- 2011-12-09 437 3.2 add rlink_core8
|
-- 2011-12-09 437 3.2 add rlink_core8
|
-- 2011-11-18 427 3.1.3 now numeric_std clean
|
-- 2011-11-18 427 3.1.3 now numeric_std clean
|
-- 2010-12-25 348 3.1.2 drop RL_FLUSH support, add RL_MONI for rlink_core;
|
-- 2010-12-25 348 3.1.2 drop RL_FLUSH support, add RL_MONI for rlink_core;
|
-- new rlink_serport interface;
|
-- new rlink_serport interface;
|
-- rename rlink_core_serport->rlink_base_serport
|
-- rename rlink_core_serport->rlink_base_serport
|
-- 2010-12-24 347 3.1.1 rename: CP_*->RL->*
|
-- 2010-12-24 347 3.1.1 rename: CP_*->RL->*
|
-- 2010-12-22 346 3.1 rename: [cd]crc->[cd]err, ioto->rbnak, ioerr->rberr
|
-- 2010-12-22 346 3.1 rename: [cd]crc->[cd]err, ioto->rbnak, ioerr->rberr
|
-- 2010-12-04 343 3.0 move rbus components to rbus/rblib; renames
|
-- 2010-12-04 343 3.0 move rbus components to rbus/rblib; renames
|
-- rri_ -> rlink and c_rri -> c_rlink;
|
-- rri_ -> rlink and c_rri -> c_rlink;
|
-- 2010-06-18 306 2.5.1 rename rbus data fields to _rbf_
|
-- 2010-06-18 306 2.5.1 rename rbus data fields to _rbf_
|
-- 2010-06-06 302 2.5 use sop/eop framing instead of soc+chaining
|
-- 2010-06-06 302 2.5 use sop/eop framing instead of soc+chaining
|
-- 2010-06-03 300 2.1.5 use FAWIDTH=5 for rri_serport
|
-- 2010-06-03 300 2.1.5 use FAWIDTH=5 for rri_serport
|
-- 2010-05-02 287 2.1.4 ren CE_XSEC->CE_INT,RP_STAT->RB_STAT,AP_LAM->RB_LAM
|
-- 2010-05-02 287 2.1.4 ren CE_XSEC->CE_INT,RP_STAT->RB_STAT,AP_LAM->RB_LAM
|
-- drop RP_IINT from interfaces; drop RTSFLUSH generic
|
-- drop RP_IINT from interfaces; drop RTSFLUSH generic
|
-- 2010-05-01 285 2.1.3 remove rri_rb_rpcompat, now obsolete
|
-- 2010-05-01 285 2.1.3 remove rri_rb_rpcompat, now obsolete
|
-- 2010-04-18 279 2.1.2 rri_core_serport: drop RTSFBUF generic
|
-- 2010-04-18 279 2.1.2 rri_core_serport: drop RTSFBUF generic
|
-- 2010-04-10 275 2.1.1 add rri_core_serport
|
-- 2010-04-10 275 2.1.1 add rri_core_serport
|
-- 2010-04-03 274 2.1 add CP_FLUSH for rri_core, rri_serport;
|
-- 2010-04-03 274 2.1 add CP_FLUSH for rri_core, rri_serport;
|
-- CE_USEC, RTSFLUSH, CTS_N, RTS_N for rri_serport
|
-- CE_USEC, RTSFLUSH, CTS_N, RTS_N for rri_serport
|
-- 2008-08-24 162 2.0 all with new rb_mreq/rb_sres interface
|
-- 2008-08-24 162 2.0 all with new rb_mreq/rb_sres interface
|
-- 2008-08-22 161 1.3 renamed rri_rbres_ -> rb_sres_; drop rri_[24]rp
|
-- 2008-08-22 161 1.3 renamed rri_rbres_ -> rb_sres_; drop rri_[24]rp
|
-- 2008-02-16 116 1.2.1 added rri_wreg(rw|w|r)_3
|
-- 2008-02-16 116 1.2.1 added rri_wreg(rw|w|r)_3
|
-- 2008-01-20 113 1.2 added rb_[mreq|sres]; _rbres_or_*; _rb_rpcompat
|
-- 2008-01-20 113 1.2 added rb_[mreq|sres]; _rbres_or_*; _rb_rpcompat
|
-- 2007-11-24 98 1.1 added RP_IINT for rri_core.
|
-- 2007-11-24 98 1.1 added RP_IINT for rri_core.
|
-- 2007-09-09 81 1.0 Initial version
|
-- 2007-09-09 81 1.0 Initial version
|
------------------------------------------------------------------------------
|
------------------------------------------------------------------------------
|
|
|
library ieee;
|
library ieee;
|
use ieee.std_logic_1164.all;
|
use ieee.std_logic_1164.all;
|
use ieee.numeric_std.all;
|
use ieee.numeric_std.all;
|
|
|
use work.slvtypes.all;
|
use work.slvtypes.all;
|
use work.rblib.all;
|
use work.rblib.all;
|
use work.serportlib.all;
|
use work.serportlib.all;
|
|
|
package rlinklib is
|
package rlinklib is
|
|
|
constant c_rlink_cpref : slv4 := "1000"; -- default comma prefix
|
constant c_rlink_cpref : slv4 := "1000"; -- default comma prefix
|
constant c_rlink_ncomm : positive := 4; -- number commas (sop,eop,nak,attn)
|
constant c_rlink_ncomm : positive := 4; -- number commas (sop,eop,nak,attn)
|
|
|
constant c_rlink_dat_idle : slv9 := "100000000";
|
constant c_rlink_dat_idle : slv9 := "100000000";
|
constant c_rlink_dat_sop : slv9 := "100000001";
|
constant c_rlink_dat_sop : slv9 := "100000001";
|
constant c_rlink_dat_eop : slv9 := "100000010";
|
constant c_rlink_dat_eop : slv9 := "100000010";
|
constant c_rlink_dat_nak : slv9 := "100000011";
|
constant c_rlink_dat_nak : slv9 := "100000011";
|
constant c_rlink_dat_attn : slv9 := "100000100";
|
constant c_rlink_dat_attn : slv9 := "100000100";
|
|
|
constant c_rlink_cmd_rreg : slv3 := "000";
|
constant c_rlink_cmd_rreg : slv3 := "000";
|
constant c_rlink_cmd_rblk : slv3 := "001";
|
constant c_rlink_cmd_rblk : slv3 := "001";
|
constant c_rlink_cmd_wreg : slv3 := "010";
|
constant c_rlink_cmd_wreg : slv3 := "010";
|
constant c_rlink_cmd_wblk : slv3 := "011";
|
constant c_rlink_cmd_wblk : slv3 := "011";
|
constant c_rlink_cmd_stat : slv3 := "100";
|
constant c_rlink_cmd_stat : slv3 := "100";
|
constant c_rlink_cmd_attn : slv3 := "101";
|
constant c_rlink_cmd_attn : slv3 := "101";
|
constant c_rlink_cmd_init : slv3 := "110";
|
constant c_rlink_cmd_init : slv3 := "110";
|
|
|
constant c_rlink_iint_rbf_anena: integer := 15; -- anena flag
|
constant c_rlink_iint_rbf_anena: integer := 15; -- anena flag
|
constant c_rlink_iint_rbf_itoena: integer := 14; -- itoena flag
|
constant c_rlink_iint_rbf_itoena: integer := 14; -- itoena flag
|
subtype c_rlink_iint_rbf_itoval is integer range 7 downto 0; -- itoval value
|
subtype c_rlink_iint_rbf_itoval is integer range 7 downto 0; -- itoval value
|
|
|
subtype c_rlink_cmd_rbf_seq is integer range 7 downto 3; -- sequence number
|
subtype c_rlink_cmd_rbf_seq is integer range 7 downto 3; -- sequence number
|
subtype c_rlink_cmd_rbf_code is integer range 2 downto 0; -- command code
|
subtype c_rlink_cmd_rbf_code is integer range 2 downto 0; -- command code
|
|
|
subtype c_rlink_stat_rbf_stat is integer range 7 downto 5; -- ext status bits
|
subtype c_rlink_stat_rbf_stat is integer range 7 downto 5; -- ext status bits
|
constant c_rlink_stat_rbf_attn: integer := 4; -- attention flags set
|
constant c_rlink_stat_rbf_attn: integer := 4; -- attention flags set
|
constant c_rlink_stat_rbf_cerr: integer := 3; -- command error
|
constant c_rlink_stat_rbf_cerr: integer := 3; -- command error
|
constant c_rlink_stat_rbf_derr: integer := 2; -- data error
|
constant c_rlink_stat_rbf_derr: integer := 2; -- data error
|
constant c_rlink_stat_rbf_rbnak: integer := 1; -- rbus no ack or timeout
|
constant c_rlink_stat_rbf_rbnak: integer := 1; -- rbus no ack or timeout
|
constant c_rlink_stat_rbf_rberr: integer := 0; -- rbus err bit set
|
constant c_rlink_stat_rbf_rberr: integer := 0; -- rbus err bit set
|
|
|
type rl_moni_type is record -- rlink_core monitor port
|
type rl_moni_type is record -- rlink_core monitor port
|
eop : slbit; -- eop send in last cycle
|
eop : slbit; -- eop send in last cycle
|
attn : slbit; -- attn send in last cycle
|
attn : slbit; -- attn send in last cycle
|
lamp : slbit; -- attn (lam) pending
|
lamp : slbit; -- attn (lam) pending
|
end record rl_moni_type;
|
end record rl_moni_type;
|
|
|
constant rl_moni_init : rl_moni_type :=
|
constant rl_moni_init : rl_moni_type :=
|
('0','0','0'); -- eop,attn,lamp
|
('0','0','0'); -- eop,attn,lamp
|
|
|
type rlb_moni_type is record -- rlink 8b monitor port
|
type rlb_moni_type is record -- rlink 8b monitor port
|
rxval : slbit; -- data in valid
|
rxval : slbit; -- data in valid
|
rxhold : slbit; -- data in hold
|
rxhold : slbit; -- data in hold
|
txena : slbit; -- data out enable
|
txena : slbit; -- data out enable
|
txbusy : slbit; -- data out busy
|
txbusy : slbit; -- data out busy
|
end record rlb_moni_type;
|
end record rlb_moni_type;
|
|
|
constant rlb_moni_init : rlb_moni_type :=
|
constant rlb_moni_init : rlb_moni_type :=
|
('0','0','0','0'); -- rxval,rxhold,txena,txbusy
|
('0','0','0','0'); -- rxval,rxhold,txena,txbusy
|
|
|
-- ise 13.1 xst can bug check if generic defaults in a package are defined via
|
-- ise 13.1 xst can bug check if generic defaults in a package are defined via
|
-- 'slv(to_unsigned())'. The conv_ construct prior to numeric_std was ok.
|
-- 'slv(to_unsigned())'. The conv_ construct prior to numeric_std was ok.
|
-- As workaround the ibus default addresses are defined here as constant.
|
-- As workaround the ibus default addresses are defined here as constant.
|
constant rbaddr_rlink_serport : slv8 := slv(to_unsigned(2#11111110#,8));
|
constant rbaddr_rlink_serport : slv8 := slv(to_unsigned(2#11111110#,8));
|
|
|
-- this definition logically belongs into the 'for test benches' section'
|
-- this definition logically belongs into the 'for test benches' section'
|
-- must be here because it is needed as generic default in rlink_core8
|
-- must be here because it is needed as generic default in rlink_core8
|
-- simbus sb_cntl field usage for rlink
|
-- simbus sb_cntl field usage for rlink
|
constant sbcntl_sbf_rlmon : integer := 15;
|
constant sbcntl_sbf_rlmon : integer := 15;
|
|
|
component rlink_core is -- rlink core with 9bit iface
|
component rlink_core is -- rlink core with 9bit iface
|
generic (
|
generic (
|
ATOWIDTH : positive := 5; -- access timeout counter width
|
ATOWIDTH : positive := 5; -- access timeout counter width
|
ITOWIDTH : positive := 6); -- idle timeout counter width
|
ITOWIDTH : positive := 6); -- idle timeout counter width
|
port (
|
port (
|
CLK : in slbit; -- clock
|
CLK : in slbit; -- clock
|
CE_INT : in slbit := '0'; -- rlink ito time unit clock enable
|
CE_INT : in slbit := '0'; -- rlink ito time unit clock enable
|
RESET : in slbit; -- reset
|
RESET : in slbit; -- reset
|
RL_DI : in slv9; -- rlink 9b: data in
|
RL_DI : in slv9; -- rlink 9b: data in
|
RL_ENA : in slbit; -- rlink 9b: data enable
|
RL_ENA : in slbit; -- rlink 9b: data enable
|
RL_BUSY : out slbit; -- rlink 9b: data busy
|
RL_BUSY : out slbit; -- rlink 9b: data busy
|
RL_DO : out slv9; -- rlink 9b: data out
|
RL_DO : out slv9; -- rlink 9b: data out
|
RL_VAL : out slbit; -- rlink 9b: data valid
|
RL_VAL : out slbit; -- rlink 9b: data valid
|
RL_HOLD : in slbit; -- rlink 9b: data hold
|
RL_HOLD : in slbit; -- rlink 9b: data hold
|
RL_MONI : out rl_moni_type; -- rlink: monitor port
|
RL_MONI : out rl_moni_type; -- rlink: monitor port
|
RB_MREQ : out rb_mreq_type; -- rbus: request
|
RB_MREQ : out rb_mreq_type; -- rbus: request
|
RB_SRES : in rb_sres_type; -- rbus: response
|
RB_SRES : in rb_sres_type; -- rbus: response
|
RB_LAM : in slv16; -- rbus: look at me
|
RB_LAM : in slv16; -- rbus: look at me
|
RB_STAT : in slv3 -- rbus: status flags
|
RB_STAT : in slv3 -- rbus: status flags
|
);
|
);
|
end component;
|
end component;
|
|
|
component rlink_aif is -- rlink, abstract interface
|
component rlink_aif is -- rlink, abstract interface
|
port (
|
port (
|
CLK : in slbit; -- clock
|
CLK : in slbit; -- clock
|
CE_INT : in slbit := '0'; -- rlink ito time unit clock enable
|
CE_INT : in slbit := '0'; -- rlink ito time unit clock enable
|
RESET : in slbit :='0'; -- reset
|
RESET : in slbit :='0'; -- reset
|
RL_DI : in slv9; -- rlink 9b: data in
|
RL_DI : in slv9; -- rlink 9b: data in
|
RL_ENA : in slbit; -- rlink 9b: data enable
|
RL_ENA : in slbit; -- rlink 9b: data enable
|
RL_BUSY : out slbit; -- rlink 9b: data busy
|
RL_BUSY : out slbit; -- rlink 9b: data busy
|
RL_DO : out slv9; -- rlink 9b: data out
|
RL_DO : out slv9; -- rlink 9b: data out
|
RL_VAL : out slbit; -- rlink 9b: data valid
|
RL_VAL : out slbit; -- rlink 9b: data valid
|
RL_HOLD : in slbit := '0' -- rlink 9b: data hold
|
RL_HOLD : in slbit := '0' -- rlink 9b: data hold
|
);
|
);
|
end component;
|
end component;
|
|
|
component rlink_core8 is -- rlink core with 8bit iface
|
component rlink_core8 is -- rlink core with 8bit iface
|
generic (
|
generic (
|
ATOWIDTH : positive := 5; -- access timeout counter width
|
ATOWIDTH : positive := 5; -- access timeout counter width
|
ITOWIDTH : positive := 6; -- idle timeout counter width
|
ITOWIDTH : positive := 6; -- idle timeout counter width
|
CPREF : slv4 := c_rlink_cpref; -- comma prefix
|
CPREF : slv4 := c_rlink_cpref; -- comma prefix
|
ENAPIN_RLMON : integer := sbcntl_sbf_rlmon; -- SB_CNTL for rlmon (-1=none)
|
ENAPIN_RLMON : integer := sbcntl_sbf_rlmon; -- SB_CNTL for rlmon (-1=none)
|
ENAPIN_RBMON : integer := sbcntl_sbf_rbmon); -- SB_CNTL for rbmon (-1=none)
|
ENAPIN_RBMON : integer := sbcntl_sbf_rbmon); -- SB_CNTL for rbmon (-1=none)
|
port (
|
port (
|
CLK : in slbit; -- clock
|
CLK : in slbit; -- clock
|
CE_INT : in slbit := '0'; -- rlink ito time unit clock enable
|
CE_INT : in slbit := '0'; -- rlink ito time unit clock enable
|
RESET : in slbit; -- reset
|
RESET : in slbit; -- reset
|
RLB_DI : in slv8; -- rlink 8b: data in
|
RLB_DI : in slv8; -- rlink 8b: data in
|
RLB_ENA : in slbit; -- rlink 8b: data enable
|
RLB_ENA : in slbit; -- rlink 8b: data enable
|
RLB_BUSY : out slbit; -- rlink 8b: data busy
|
RLB_BUSY : out slbit; -- rlink 8b: data busy
|
RLB_DO : out slv8; -- rlink 8b: data out
|
RLB_DO : out slv8; -- rlink 8b: data out
|
RLB_VAL : out slbit; -- rlink 8b: data valid
|
RLB_VAL : out slbit; -- rlink 8b: data valid
|
RLB_HOLD : in slbit; -- rlink 8b: data hold
|
RLB_HOLD : in slbit; -- rlink 8b: data hold
|
RL_MONI : out rl_moni_type; -- rlink: monitor port
|
RL_MONI : out rl_moni_type; -- rlink: monitor port
|
RB_MREQ : out rb_mreq_type; -- rbus: request
|
RB_MREQ : out rb_mreq_type; -- rbus: request
|
RB_SRES : in rb_sres_type; -- rbus: response
|
RB_SRES : in rb_sres_type; -- rbus: response
|
RB_LAM : in slv16; -- rbus: look at me
|
RB_LAM : in slv16; -- rbus: look at me
|
RB_STAT : in slv3 -- rbus: status flags
|
RB_STAT : in slv3 -- rbus: status flags
|
);
|
);
|
end component;
|
end component;
|
|
|
component rlink_rlbmux is -- rlink rlb multiplexer
|
component rlink_rlbmux is -- rlink rlb multiplexer
|
port (
|
port (
|
SEL : in slbit; -- port select (0:RLB<->P0; 1:RLB<->P1)
|
SEL : in slbit; -- port select (0:RLB<->P0; 1:RLB<->P1)
|
RLB_DI : out slv8; -- rlb: data in
|
RLB_DI : out slv8; -- rlb: data in
|
RLB_ENA : out slbit; -- rlb: data enable
|
RLB_ENA : out slbit; -- rlb: data enable
|
RLB_BUSY : in slbit; -- rlb: data busy
|
RLB_BUSY : in slbit; -- rlb: data busy
|
RLB_DO : in slv8; -- rlb: data out
|
RLB_DO : in slv8; -- rlb: data out
|
RLB_VAL : in slbit; -- rlb: data valid
|
RLB_VAL : in slbit; -- rlb: data valid
|
RLB_HOLD : out slbit; -- rlb: data hold
|
RLB_HOLD : out slbit; -- rlb: data hold
|
P0_RXDATA : in slv8; -- p0: rx data
|
P0_RXDATA : in slv8; -- p0: rx data
|
P0_RXVAL : in slbit; -- p0: rx valid
|
P0_RXVAL : in slbit; -- p0: rx valid
|
P0_RXHOLD : out slbit; -- p0: rx hold
|
P0_RXHOLD : out slbit; -- p0: rx hold
|
P0_TXDATA : out slv8; -- p0: tx data
|
P0_TXDATA : out slv8; -- p0: tx data
|
P0_TXENA : out slbit; -- p0: tx enable
|
P0_TXENA : out slbit; -- p0: tx enable
|
P0_TXBUSY : in slbit; -- p0: tx busy
|
P0_TXBUSY : in slbit; -- p0: tx busy
|
P1_RXDATA : in slv8; -- p1: rx data
|
P1_RXDATA : in slv8; -- p1: rx data
|
P1_RXVAL : in slbit; -- p1: rx valid
|
P1_RXVAL : in slbit; -- p1: rx valid
|
P1_RXHOLD : out slbit; -- p1: rx hold
|
P1_RXHOLD : out slbit; -- p1: rx hold
|
P1_TXDATA : out slv8; -- p1: tx data
|
P1_TXDATA : out slv8; -- p1: tx data
|
P1_TXENA : out slbit; -- p1: tx enable
|
P1_TXENA : out slbit; -- p1: tx enable
|
P1_TXBUSY : in slbit -- p1: tx busy
|
P1_TXBUSY : in slbit -- p1: tx busy
|
);
|
);
|
end component;
|
end component;
|
|
|
--
|
--
|
-- core + concrete_interface combo's
|
-- core + concrete_interface combo's
|
--
|
--
|
|
|
component rlink_sp1c is -- rlink_core8+serport_1clock combo
|
component rlink_sp1c is -- rlink_core8+serport_1clock combo
|
generic (
|
generic (
|
ATOWIDTH : positive := 5; -- access timeout counter width
|
ATOWIDTH : positive := 5; -- access timeout counter width
|
ITOWIDTH : positive := 6; -- idle timeout counter width
|
ITOWIDTH : positive := 6; -- idle timeout counter width
|
CPREF : slv4 := c_rlink_cpref; -- comma prefix
|
CPREF : slv4 := c_rlink_cpref; -- comma prefix
|
IFAWIDTH : natural := 5; -- input fifo address width (0=none)
|
IFAWIDTH : natural := 5; -- input fifo address width (0=none)
|
OFAWIDTH : natural := 5; -- output fifo address width (0=none)
|
OFAWIDTH : natural := 5; -- output fifo address width (0=none)
|
ENAPIN_RLMON : integer := sbcntl_sbf_rlmon; -- SB_CNTL for rlmon (-1=none)
|
ENAPIN_RLMON : integer := sbcntl_sbf_rlmon; -- SB_CNTL for rlmon (-1=none)
|
ENAPIN_RBMON : integer := sbcntl_sbf_rbmon; -- SB_CNTL for rbmon (-1=none)
|
ENAPIN_RBMON : integer := sbcntl_sbf_rbmon; -- SB_CNTL for rbmon (-1=none)
|
CDWIDTH : positive := 13; -- clk divider width
|
CDWIDTH : positive := 13; -- clk divider width
|
CDINIT : natural := 15); -- clk divider initial/reset setting
|
CDINIT : natural := 15); -- clk divider initial/reset setting
|
port (
|
port (
|
CLK : in slbit; -- clock
|
CLK : in slbit; -- clock
|
CE_USEC : in slbit; -- 1 usec clock enable
|
CE_USEC : in slbit; -- 1 usec clock enable
|
CE_MSEC : in slbit; -- 1 msec clock enable
|
CE_MSEC : in slbit; -- 1 msec clock enable
|
CE_INT : in slbit := '0'; -- rri ito time unit clock enable
|
CE_INT : in slbit := '0'; -- rri ito time unit clock enable
|
RESET : in slbit; -- reset
|
RESET : in slbit; -- reset
|
ENAXON : in slbit; -- enable xon/xoff handling
|
ENAXON : in slbit; -- enable xon/xoff handling
|
ENAESC : in slbit; -- enable xon/xoff escaping
|
ENAESC : in slbit; -- enable xon/xoff escaping
|
RXSD : in slbit; -- receive serial data (board view)
|
RXSD : in slbit; -- receive serial data (board view)
|
TXSD : out slbit; -- transmit serial data (board view)
|
TXSD : out slbit; -- transmit serial data (board view)
|
CTS_N : in slbit := '0'; -- clear to send (act.low, board view)
|
CTS_N : in slbit := '0'; -- clear to send (act.low, board view)
|
RTS_N : out slbit; -- request to send (act.low, board view)
|
RTS_N : out slbit; -- request to send (act.low, board view)
|
RB_MREQ : out rb_mreq_type; -- rbus: request
|
RB_MREQ : out rb_mreq_type; -- rbus: request
|
RB_SRES : in rb_sres_type; -- rbus: response
|
RB_SRES : in rb_sres_type; -- rbus: response
|
RB_LAM : in slv16; -- rbus: look at me
|
RB_LAM : in slv16; -- rbus: look at me
|
RB_STAT : in slv3; -- rbus: status flags
|
RB_STAT : in slv3; -- rbus: status flags
|
RL_MONI : out rl_moni_type; -- rlink_core: monitor port
|
RL_MONI : out rl_moni_type; -- rlink_core: monitor port
|
SER_MONI : out serport_moni_type -- serport: monitor port
|
SER_MONI : out serport_moni_type -- serport: monitor port
|
);
|
);
|
end component;
|
end component;
|
|
|
--
|
--
|
-- components for use in test benches (not synthesizable)
|
-- components for use in test benches (not synthesizable)
|
--
|
--
|
|
|
component rlink_mon is -- rlink monitor
|
component rlink_mon is -- rlink monitor
|
generic (
|
generic (
|
DWIDTH : positive := 9); -- data port width (8 or 9)
|
DWIDTH : positive := 9); -- data port width (8 or 9)
|
port (
|
port (
|
CLK : in slbit; -- clock
|
CLK : in slbit; -- clock
|
CLK_CYCLE : in integer := 0; -- clock cycle number
|
CLK_CYCLE : in integer := 0; -- clock cycle number
|
ENA : in slbit := '1'; -- enable monitor output
|
ENA : in slbit := '1'; -- enable monitor output
|
RL_DI : in slv(DWIDTH-1 downto 0); -- rlink: data in
|
RL_DI : in slv(DWIDTH-1 downto 0); -- rlink: data in
|
RL_ENA : in slbit; -- rlink: data enable
|
RL_ENA : in slbit; -- rlink: data enable
|
RL_BUSY : in slbit; -- rlink: data busy
|
RL_BUSY : in slbit; -- rlink: data busy
|
RL_DO : in slv(DWIDTH-1 downto 0); -- rlink: data out
|
RL_DO : in slv(DWIDTH-1 downto 0); -- rlink: data out
|
RL_VAL : in slbit; -- rlink: data valid
|
RL_VAL : in slbit; -- rlink: data valid
|
RL_HOLD : in slbit -- rlink: data hold
|
RL_HOLD : in slbit -- rlink: data hold
|
);
|
);
|
end component;
|
end component;
|
|
|
component rlink_mon_sb is -- simbus wrap for rlink monitor
|
component rlink_mon_sb is -- simbus wrap for rlink monitor
|
generic (
|
generic (
|
DWIDTH : positive := 9; -- data port width (8 or 9)
|
DWIDTH : positive := 9; -- data port width (8 or 9)
|
ENAPIN : integer := sbcntl_sbf_rlmon); -- SB_CNTL signal to use for enable
|
ENAPIN : integer := sbcntl_sbf_rlmon); -- SB_CNTL signal to use for enable
|
port (
|
port (
|
CLK : in slbit; -- clock
|
CLK : in slbit; -- clock
|
RL_DI : in slv(DWIDTH-1 downto 0); -- rlink: data in
|
RL_DI : in slv(DWIDTH-1 downto 0); -- rlink: data in
|
RL_ENA : in slbit; -- rlink: data enable
|
RL_ENA : in slbit; -- rlink: data enable
|
RL_BUSY : in slbit; -- rlink: data busy
|
RL_BUSY : in slbit; -- rlink: data busy
|
RL_DO : in slv(DWIDTH-1 downto 0); -- rlink: data out
|
RL_DO : in slv(DWIDTH-1 downto 0); -- rlink: data out
|
RL_VAL : in slbit; -- rlink: data valid
|
RL_VAL : in slbit; -- rlink: data valid
|
RL_HOLD : in slbit -- rlink: data hold
|
RL_HOLD : in slbit -- rlink: data hold
|
);
|
);
|
end component;
|
end component;
|
|
|
end package rlinklib;
|
end package rlinklib;
|
|
|