# $Id: README.txt 442 2011-12-23 10:03:28Z mueller $
|
# $Id: README.txt 467 2013-01-02 19:49:05Z mueller $
|
|
|
Release notes for w11a
|
Release notes for w11a
|
|
|
Table of content:
|
Table of content:
|
|
|
1. Documentation
|
1. Documentation
|
2. Files
|
2. Files
|
3. Change Log
|
3. Change Log
|
|
|
|
|
1. Documentation -------------------------------------------------------------
|
1. Documentation -------------------------------------------------------------
|
|
|
More detailed information on installation, build and test can be found
|
More detailed information on installation, build and test can be found
|
in the doc directory, specifically
|
in the doc directory, specifically
|
|
|
* README.txt: release notes
|
* README.txt: release notes
|
* INSTALL.txt: installation and building test benches and systems
|
* INSTALL.txt: installation and building test benches and systems
|
* w11a_tb_guide.txt: running test benches
|
* w11a_tb_guide.txt: running test benches
|
* w11a_os_guide.txt: booting operating systems
|
* w11a_os_guide.txt: booting operating systems
|
* w11a_known_issues.txt: known differences, limitations and issues
|
* w11a_known_issues.txt: known differences, limitations and issues
|
|
|
2. Files ---------------------------------------------------------------------
|
2. Files ---------------------------------------------------------------------
|
|
|
doc Documentation
|
doc Documentation
|
rtl VHDL sources
|
rtl VHDL sources
|
rtl/bplib - board and component support libs
|
rtl/bplib - board and component support libs
|
rtl/bplib/atlys - for Digilent Atlys board
|
rtl/bplib/atlys - for Digilent Atlys board
|
|
rtl/bplib/fx2lib - for Cypress FX2 USB interface controller
|
rtl/bplib/issi - for ISSI parts
|
rtl/bplib/issi - for ISSI parts
|
rtl/bplib/micron - for Micron parts
|
rtl/bplib/micron - for Micron parts
|
rtl/bplib/nexys2 - for Digilent Nexsy2 board
|
rtl/bplib/nexys2 - for Digilent Nexsy2 board
|
rtl/bplib/nexys3 - for Digilent Nexsy3 board
|
rtl/bplib/nexys3 - for Digilent Nexsy3 board
|
rtl/bplib/nxcramlib - for CRAM part used in Nexys2/3
|
rtl/bplib/nxcramlib - for CRAM part used in Nexys2/3
|
rtl/bplib/s3board - for Digilent S3BOARD
|
rtl/bplib/s3board - for Digilent S3BOARD
|
rtl/ibus - ibus devices (UNIBUS peripherals)
|
rtl/ibus - ibus devices (UNIBUS peripherals)
|
rtl/sys_gen - top level designs
|
rtl/sys_gen - top level designs
|
|
rtl/sys_gen/tst_fx2loop - top level designs for Cypress FX2 tester
|
|
nexys2 - systems for Nexsy2
|
rtl/sys_gen/tst_rlink - top level designs for an rlink tester
|
rtl/sys_gen/tst_rlink - top level designs for an rlink tester
|
nexys2,nexys3,s3board - systems for Nexsy2,Nexsy3,S3BOARD
|
nexys2,nexys3,s3board - systems for Nexsy2,Nexsy3,S3BOARD
|
|
rtl/sys_gen/tst_rlink_cuff - top level designs for rlink over FX2 tester
|
|
nexys2 - systems for Nexsy2
|
rtl/sys_gen/tst_serloop - top level designs for serport loop tester
|
rtl/sys_gen/tst_serloop - top level designs for serport loop tester
|
nexys2,nexys3,s3board - systems for Nexsy2,Nexsy3,S3BOARD
|
nexys2,nexys3,s3board - systems for Nexsy2,Nexsy3,S3BOARD
|
rtl/sys_gen/tst_snhumanio - top level designs for human I/O tester
|
rtl/sys_gen/tst_snhumanio - top level designs for human I/O tester
|
atlys,nexys2,nexys3,s3board - systems for Atlys,Nexsy2,Nexsy3,S3BOARD
|
atlys,nexys2,nexys3,s3board - systems for Atlys,Nexsy2,Nexsy3,S3BOARD
|
rtl/sys_gen/w11a - top level designs for w11a SoC
|
rtl/sys_gen/w11a - top level designs for w11a SoC
|
nexys2,nexys3,s3board - w11a systems for Nexsy2,Nexsy3,S3BOARD
|
nexys2,nexys3,s3board - w11a systems for Nexsy2,Nexsy3,S3BOARD
|
rtl/vlib - VHDL component libs
|
rtl/vlib - VHDL component libs
|
rtl/vlib/comlib - communication
|
rtl/vlib/comlib - communication
|
rtl/vlib/genlib - general
|
rtl/vlib/genlib - general
|
rtl/vlib/memlib - memory
|
rtl/vlib/memlib - memory
|
rtl/vlib/rbus - rri: rbus
|
rtl/vlib/rbus - rri: rbus
|
rtl/vlib/rlink - rri: rlink
|
rtl/vlib/rlink - rri: rlink
|
rtl/vlib/serport - serial port (UART)
|
rtl/vlib/serport - serial port (UART)
|
rtl/vlib/simlib - simulation helper lib
|
rtl/vlib/simlib - simulation helper lib
|
rtl/vlib/xlib - Xilinx specific components
|
rtl/vlib/xlib - Xilinx specific components
|
rtl/w11a - w11a core
|
rtl/w11a - w11a core
|
tools helper programs
|
tools helper programs
|
tools/bin - scripts and binaries
|
tools/bin - scripts and binaries
|
tools/dox - Doxygen documentation configuration
|
tools/dox - Doxygen documentation configuration
|
tools/make - make includes
|
tools/make - make includes
|
tools/src - C++ sources
|
tools/fx2 - Firmware for Cypress FX2 USB Interface
|
|
tools/fx2/bin - pre-build firmware images in .ihx format
|
|
tools/fx2/src - C and asm sources
|
|
tools/fx2/sys - udev rules for USB on fpga eval boards
|
|
tools/src - C++ sources for rlink backend software
|
tools/src/librlink - basic rlink interface
|
tools/src/librlink - basic rlink interface
|
tools/src/librlinktpp - C++ to tcl binding for rlink interface
|
tools/src/librlinktpp - C++ to tcl binding for rlink interface
|
tools/src/librtools - general support classes and methods
|
|
tools/src/librtcltools - support classes to implement Tcl bindings
|
tools/src/librtcltools - support classes to implement Tcl bindings
|
|
tools/src/librtools - general support classes and methods
|
tools/src/librutiltpp - Tcl support commands implemented in C++
|
tools/src/librutiltpp - Tcl support commands implemented in C++
|
tools/tcl - Tcl scripts
|
tools/tcl - Tcl scripts
|
|
|
3. Change Log ----------------------------------------------------------------
|
3. Change Log ----------------------------------------------------------------
|
|
|
|
- trunk (2013-01-02: svn rev 17(oc) 467(wfjm); untagged w11a_V0.56) ++++++++++
|
|
|
|
- Summary
|
|
- re-organized handling of board and derived clocks in test benches
|
|
- added message filter definitions for some designs (.mfset files)
|
|
- added Cypress EZ-USB FX2 controller (USB interface)
|
|
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
|
|
- FPGA configure over USB now supported directly in make build flow
|
|
- added test systems for USB testing and rlink over USB verification
|
|
- no functional change of w11a CPU core or any pre-existing test systems
|
|
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
|
|
in the file README_USB-VID-PID.txt. You'll be responsible for any
|
|
misuse of the defaults provided with the project sources !!
|
|
|
|
- New refernce system
|
|
The development and test system was upgraded from Kubuntu 10.04 to 12.04.
|
|
The version of several key tools and libraries changed:
|
|
linux kernel 3.2.0 (was 2.6.32)
|
|
gcc/g++ 4.6.3 (was 4.4.3)
|
|
boost 1.46.1 (was 1.40)
|
|
libusb 1.0.9 (was 1.0.6)
|
|
perl 5.14.2 (was 5.10.1)
|
|
tcl 8.5.11 (was 8.4.19)
|
|
xilinx ise 13.3 (was 13.1)
|
|
--> see INSTALL.txt, INSTALL_ghdl.txt and INSTALL_urjtag.txt
|
|
|
|
- New features
|
|
- added firmware for Cypress FX2 controller
|
|
- tools/fx2
|
|
- bin - pre-build firmware images in .ihx file format
|
|
- src - C and asm sources
|
|
- sys - udev rules for usb interfaces on fpga eval boards
|
|
- new modules
|
|
- rtl/bplib/fx2lib
|
|
- fx2_2fifoctl_ic - Cypress EZ-USB FX2 controller (2 fifo; int clk)
|
|
- fx2_3fifoctl_ic - Cypress EZ-USB FX2 controller (3 fifo; int clk)
|
|
- new systems
|
|
- rtl/sys_gen/tst_fx2loop/nexys2/ic/sys_tst_fx2loop_ic_n2
|
|
- rtl/sys_gen/tst_fx2loop/nexys2/ic3/sys_tst_fx2loop_ic3_n2
|
|
- rtl/sys_gen/tst_rlink_cuff/nexys2/ic/sys_tst_rlink_cuff_ic_n2
|
|
- tools/bin
|
|
- xilinx_sdf_ghdl_filter: tool to patch ISE sdf files for usage with ghdl
|
|
|
|
- Changes
|
|
- documentation
|
|
- added a 'system requirements' section in INSTALL.txt
|
|
- added INSTALL_ghdl.txt and INSTALL_urjtag.txt covering ghdl and urjtag
|
|
- added README_USB-VID-PID.txt
|
|
- organizational changes
|
|
- added TCLINC,RETRO_FX2_VID,RETRO_FX2_PID environment variables
|
|
- functional changes
|
|
- tools/bin
|
|
- vbomconv - file name substitution handling redone; many vboms updated
|
|
- retired modules
|
|
- vlib/rlink/tb/
|
|
- tbcore_rlink_dcm - obsolete, use tbcore_rlink
|
|
|
- trunk (2011-12-23: svn rev 16(oc) 442(wfjm); untagged w11a_V0.55) +++++++++
|
- trunk (2011-12-23: svn rev 16(oc) 442(wfjm); untagged w11a_V0.55) +++++++++
|
|
|
- Summary
|
- Summary
|
- added xon/xoff (software flow control) support to serport library
|
- added xon/xoff (software flow control) support to serport library
|
- added test systems for serport verification
|
- added test systems for serport verification
|
- use new serport stack in sys_w11a_* and sys_tst_rlink_* systems
|
- use new serport stack in sys_w11a_* and sys_tst_rlink_* systems
|
|
|
- Changes
|
|
- retired modules
|
|
- vlib/rlink
|
|
- rlink_rlb2rl - obsolete, now all in rlink_core8
|
|
- rlink_base - use now new rlink_core8
|
|
- rlink_serport - obsolete, now all in rlink_sp1c
|
|
- rlink_base_serport - use now new rlink_sp1c
|
|
|
|
- New features
|
- New features
|
- new modules
|
- new modules
|
- vlib/serport
|
- vlib/serport
|
- serport_xonrx - xon/xoff logic rx path
|
- serport_xonrx - xon/xoff logic rx path
|
- serport_xontx - xon/xoff logic tx path
|
- serport_xontx - xon/xoff logic tx path
|
- serport_1clock - serial port module (uart, fifo, flow control)
|
- serport_1clock - serial port module (uart, fifo, flow control)
|
- vlib/rlink
|
- vlib/rlink
|
- rlink_core8 - rlink core8 with 8bit interface
|
- rlink_core8 - rlink core8 with 8bit interface
|
- rlink_sp1c - rlink_core8 + serport_1clock combo
|
- rlink_sp1c - rlink_core8 + serport_1clock combo
|
- new unit tests
|
- new unit tests
|
- bplib/s3board/tb/tb_s3_sram_memctl (for s3board sram controller
|
- bplib/s3board/tb/tb_s3_sram_memctl (for s3board sram controller
|
- bplib/nxcramlib/tb/tb_nx_cram_memctl_as (for nexys2,3 cram controller)
|
- bplib/nxcramlib/tb/tb_nx_cram_memctl_as (for nexys2,3 cram controller)
|
- new systems
|
- new systems
|
- sys_gen/tst_serloop/nexys2/sys_tst_serloop1_n2
|
- sys_gen/tst_serloop/nexys2/sys_tst_serloop1_n2
|
- sys_gen/tst_serloop/nexys3/sys_tst_serloop1_n3
|
- sys_gen/tst_serloop/nexys3/sys_tst_serloop1_n3
|
- sys_gen/tst_serloop/s3board/sys_tst_serloop1_s3
|
- sys_gen/tst_serloop/s3board/sys_tst_serloop1_s3
|
- sys_gen/tst_rlink/s3board/sys_tst_rlink_s3
|
- sys_gen/tst_rlink/s3board/sys_tst_rlink_s3
|
|
|
|
- Changes
|
|
- retired modules
|
|
- vlib/rlink
|
|
- rlink_rlb2rl - obsolete, now all in rlink_core8
|
|
- rlink_base - use now new rlink_core8
|
|
- rlink_serport - obsolete, now all in rlink_sp1c
|
|
- rlink_base_serport - use now new rlink_sp1c
|
|
|
- trunk (2011-12-04: svn rev 15(oc) 436(wfjm); untagged w11a_V0.54) +++++++++
|
- trunk (2011-12-04: svn rev 15(oc) 436(wfjm); untagged w11a_V0.54) +++++++++
|
|
|
- Summary
|
- Summary
|
- added support for nexys3 board for w11a
|
- added support for nexys3 board for w11a
|
|
|
- Changes
|
|
- module renames:
|
|
bplib/nexys2/n2_cram_dummy -> bplib/nxcramlib/nx_cram_dummy
|
|
bplib/nexys2/n2_cram_memctl_as -> bplib/nxcramlib/nx_cram_memctl_as
|
|
|
|
- New features
|
- New features
|
- new systems
|
- new systems
|
- sys_gen/w11a/nexys3/sys_w11a_n3
|
- sys_gen/w11a/nexys3/sys_w11a_n3
|
- sys_gen/w11a/nexys3/sys_tst_rlink_n3
|
- sys_gen/w11a/nexys3/sys_tst_rlink_n3
|
|
|
|
- Changes
|
|
- module renames:
|
|
bplib/nexys2/n2_cram_dummy -> bplib/nxcramlib/nx_cram_dummy
|
|
bplib/nexys2/n2_cram_memctl_as -> bplib/nxcramlib/nx_cram_memctl_as
|
|
|
- Bug fixes
|
- Bug fixes
|
- tools/src/lib*: backend libraries compile now on 64 bit systems
|
- tools/src/lib*: backend libraries compile now on 64 bit systems
|
|
|
- trunk (2011-11-20: svn rev 14(oc) 428(wfjm); untagged w11a_V0.532) +++++++++
|
- trunk (2011-11-20: svn rev 14(oc) 428(wfjm); untagged w11a_V0.532) +++++++++
|
|
|
- Summary
|
- Summary
|
- generalized the 'human I/O' interface for s3board,nexys2/3 and atlys
|
- generalized the 'human I/O' interface for s3board,nexys2/3 and atlys
|
- added test design for the 'human I/O' interface
|
- added test design for the 'human I/O' interface
|
- no functional change of w11a CPU core or any existing test systems
|
- no functional change of w11a CPU core or any existing test systems
|
|
|
- Changes
|
- Changes
|
- functional changes
|
- functional changes
|
- use now 'a6' polynomial of Koopman et al for crc8 in rlink
|
- use now 'a6' polynomial of Koopman et al for crc8 in rlink
|
- with one exception all vhdl sources use now numeric_std
|
- with one exception all vhdl sources use now numeric_std
|
- module renames:
|
- module renames:
|
vlib/xlib/dcm_sp_sfs_gsim -> vlib/xlib/dcm_sfs_gsim
|
vlib/xlib/dcm_sp_sfs_gsim -> vlib/xlib/dcm_sfs_gsim
|
vlib/xlib/dcm_sp_sfs_unisim -> vlib/xlib/dcm_sfs_unisim_s3e
|
vlib/xlib/dcm_sp_sfs_unisim -> vlib/xlib/dcm_sfs_unisim_s3e
|
vlib/xlib/tb/tb_dcm_sp_sfs -> vlib/xlib/tb/tb_dcm_sfs
|
vlib/xlib/tb/tb_dcm_sp_sfs -> vlib/xlib/tb/tb_dcm_sfs
|
|
|
- New features
|
- New features
|
- new modules
|
- new modules
|
- rtl/sys_gen/tst_snhumanio
|
- rtl/sys_gen/tst_snhumanio
|
- sub-tree with test design for 'human I/O' interface modules
|
- sub-tree with test design for 'human I/O' interface modules
|
- atlys, nexys2, and s3board directories contain the systems
|
- atlys, nexys2, and s3board directories contain the systems
|
for the respective Digilent boards
|
for the respective Digilent boards
|
|
|
- trunk (2011-09-11: svn rev 12(oc) 409(wfjm); untagged w11a_V0.531) +++++++++
|
- trunk (2011-09-11: svn rev 12(oc) 409(wfjm); untagged w11a_V0.531) +++++++++
|
|
|
- Summary
|
- Summary
|
- Many small changes to prepare upcoming support for
|
- Many small changes to prepare upcoming support for
|
- Spartan-6 boards (nexys3 and atlys)
|
- Spartan-6 boards (nexys3 and atlys)
|
- usage of Cypress FX2 USB interface on nexys2/3 and atlys boards
|
- usage of Cypress FX2 USB interface on nexys2/3 and atlys boards
|
- no functional change of w11a CPU core or any test systems
|
- no functional change of w11a CPU core or any test systems
|
|
|
- Changes
|
- Changes
|
- use boost libraries instead of custom coding:
|
- use boost libraries instead of custom coding:
|
- boost/function and /bind for callbacks, retire RmethDscBase and RmethDsc
|
- boost/function and /bind for callbacks, retire RmethDscBase and RmethDsc
|
- boost/foreach for some iterator loops
|
- boost/foreach for some iterator loops
|
Note: boost 1.35 and gcc 4.3 or newer is required, see INSTALL.txt
|
Note: boost 1.35 and gcc 4.3 or newer is required, see INSTALL.txt
|
- module renames:
|
- module renames:
|
bplib/s3board/s3_rs232_iob_int -> bplib/bpgen/bp_rs232_2line_iob
|
bplib/s3board/s3_rs232_iob_int -> bplib/bpgen/bp_rs232_2line_iob
|
bplib/s3board/s3_rs232_iob_ext -> bplib/bpgen/bp_rs232_4line_iob
|
bplib/s3board/s3_rs232_iob_ext -> bplib/bpgen/bp_rs232_4line_iob
|
bplib/s3board/s3_dispdrv -> bplib/bpgen/sn_4x7segctl
|
bplib/s3board/s3_dispdrv -> bplib/bpgen/sn_4x7segctl
|
bplib/s3board/s3_humanio -> bplib/bpgen/sn_humanio
|
bplib/s3board/s3_humanio -> bplib/bpgen/sn_humanio
|
bplib/s3board/s3_humanio_rbus -> bplib/bpgen/sn_humanio_rbus
|
bplib/s3board/s3_humanio_rbus -> bplib/bpgen/sn_humanio_rbus
|
- other renames:
|
- other renames:
|
tools/bin/impact_wrapper -> tools/bin/config_wrapper
|
tools/bin/impact_wrapper -> tools/bin/config_wrapper
|
- reorganize Makefile includes and xflow option files
|
- reorganize Makefile includes and xflow option files
|
rtl/vlib/Makefile.ghdl -> rtl/make/generic_ghdl.mk
|
rtl/vlib/Makefile.ghdl -> rtl/make/generic_ghdl.mk
|
rtl/vlib/Makefile.isim -> rtl/make/generic_isim.mk
|
rtl/vlib/Makefile.isim -> rtl/make/generic_isim.mk
|
rtl/vlib/Makefile.xflow -> rtl/make/generic_xflow.mk
|
rtl/vlib/Makefile.xflow -> rtl/make/generic_xflow.mk
|
rtl/vlib/xst_vhdl.opt -> rtl/make/syn_s3_speed.opt
|
rtl/vlib/xst_vhdl.opt -> rtl/make/syn_s3_speed.opt
|
rtl/vlib/balanced.opt -> rtl/make/imp_s3_speed.opt
|
rtl/vlib/balanced.opt -> rtl/make/imp_s3_speed.opt
|
|
|
- trunk (2011-04-17: svn rev 11(oc) 376(wfjm); untagged w11a_V0.53) ++++++++++
|
- trunk (2011-04-17: svn rev 11(oc) 376(wfjm); untagged w11a_V0.53) ++++++++++
|
|
|
- Summary
|
- Summary
|
- Introduce C++ and Tcl based backend server. A set of C++ classes provide
|
- Introduce C++ and Tcl based backend server. A set of C++ classes provide
|
the basic rlink communication primitives. Additional glue classes provide
|
the basic rlink communication primitives. Additional glue classes provide
|
a Tcl binding. This first phase contains the basic functionality needed
|
a Tcl binding. This first phase contains the basic functionality needed
|
to control simple test benches.
|
to control simple test benches.
|
- add an 'rlink exerciser' (tst_rlink) and a top level design for a Nexys2
|
- add an 'rlink exerciser' (tst_rlink) and a top level design for a Nexys2
|
board (sys_tst_rlink_n2) and a test suite implemented in Tcl.
|
board (sys_tst_rlink_n2) and a test suite implemented in Tcl.
|
|
|
- Note: No functional changes in w11a core and I/O system at this point!
|
- Note: No functional changes in w11a core and I/O system at this point!
|
The w11a demonstrator systems are still operated with the old
|
The w11a demonstrator systems are still operated with the old
|
backend code (pi_rri).
|
backend code (pi_rri).
|
|
|
- New features
|
- New features
|
- new directory trees for
|
- new directory trees for
|
- C++ sources of backend (plus make and doxygen documentation support)
|
- C++ sources of backend (plus make and doxygen documentation support)
|
- tools/dox - Doxygen documentation configuration
|
- tools/dox - Doxygen documentation configuration
|
- tools/make - make includes
|
- tools/make - make includes
|
- tools/src/librlink - basic rlink interface
|
- tools/src/librlink - basic rlink interface
|
- tools/src/librlinktpp - C++ to tcl binding for rlink interface
|
- tools/src/librlinktpp - C++ to tcl binding for rlink interface
|
- tools/src/librtools - general support classes and methods
|
- tools/src/librtools - general support classes and methods
|
- tools/src/librtcltools - support classes to implement Tcl bindings
|
- tools/src/librtcltools - support classes to implement Tcl bindings
|
- tools/src/librutiltpp - Tcl support commands implemented in C++
|
- tools/src/librutiltpp - Tcl support commands implemented in C++
|
- VHDL sources of an 'rlink exerciser'
|
- VHDL sources of an 'rlink exerciser'
|
- rtl/sys_gen/tst_rlink - top level designs for an rlink tester
|
- rtl/sys_gen/tst_rlink - top level designs for an rlink tester
|
- rtl/sys_gen/tst_rlink/nexys2 - rlink tester system for Nexsy2 board
|
- rtl/sys_gen/tst_rlink/nexys2 - rlink tester system for Nexsy2 board
|
- Tcl sources of 'rlink exerciser'
|
- Tcl sources of 'rlink exerciser'
|
- tools/tcl/rlink - defs and proc's for basic rlink functions
|
- tools/tcl/rlink - defs and proc's for basic rlink functions
|
- tools/tcl/rutil - general support procs
|
- tools/tcl/rutil - general support procs
|
- tools/tcl/rbtest - defs and proc's for rbd_tester
|
- tools/tcl/rbtest - defs and proc's for rbd_tester
|
- tools/tcl/rbbram - defs and proc's for rbd_bram
|
- tools/tcl/rbbram - defs and proc's for rbd_bram
|
- tools/tcl/rbmoni - defs and proc's for rbd_rbmon
|
- tools/tcl/rbmoni - defs and proc's for rbd_rbmon
|
- tools/tcl/rbs3hio - defs and proc's for s3_humanio_rbus
|
- tools/tcl/rbs3hio - defs and proc's for s3_humanio_rbus
|
- tools/tcl/tst_rlink - defs and proc's for tst_rlink
|
- tools/tcl/tst_rlink - defs and proc's for tst_rlink
|
- new modules
|
- new modules
|
- rtl/vlib/rbus
|
- rtl/vlib/rbus
|
- rbd_bram - rbus bram test target
|
- rbd_bram - rbus bram test target
|
- rbd_eyemon - eye monitor for serport's
|
- rbd_eyemon - eye monitor for serport's
|
- rbd_rbmon - rbus monitor
|
- rbd_rbmon - rbus monitor
|
- rbd_tester - rbus tester
|
- rbd_tester - rbus tester
|
- rbd_timer - usec precision timer
|
- rbd_timer - usec precision timer
|
- rtl/vlib/memlib
|
- rtl/vlib/memlib
|
- additional wrappers for distributed and block memories added
|
- additional wrappers for distributed and block memories added
|
- tools/bin
|
- tools/bin
|
- ti_rri: Tcl driver for rlink tests and servers (will replace pi_rri)
|
- ti_rri: Tcl driver for rlink tests and servers (will replace pi_rri)
|
|
|
- trunk (2011-01-02: svn rev 9(oc) 352(wfjm); untagged w11a_V0.52) +++++++++++
|
- trunk (2011-01-02: svn rev 9(oc) 352(wfjm); untagged w11a_V0.52) +++++++++++
|
|
|
- Summary
|
- Summary
|
- Introduce rbus protocol V3
|
- Introduce rbus protocol V3
|
- reorganize rbus and rlink modules, many renames
|
- reorganize rbus and rlink modules, many renames
|
|
|
|
- New features
|
|
- vlib/rbus
|
|
- added several rbus devices useful for debugging
|
|
- rbd_tester: test target, used for example in test benches
|
|
|
- Changes
|
- Changes
|
- module renames:
|
- module renames:
|
- the rri (remote-register-interface) components were re-organized and
|
- the rri (remote-register-interface) components were re-organized and
|
cleanly separated into rbus and rlink components:
|
cleanly separated into rbus and rlink components:
|
rri/rb_sres_or_* -> rbus/rb_sres_or_*
|
rri/rb_sres_or_* -> rbus/rb_sres_or_*
|
rri/rri_core -> rlink/rlink_core
|
rri/rri_core -> rlink/rlink_core
|
rri/rri_base_serport -> rlink/rlink_base_serport
|
rri/rri_base_serport -> rlink/rlink_base_serport
|
rri/rrilib -> rbus/rblib
|
rri/rrilib -> rbus/rblib
|
-> rlink/rlinklib
|
-> rlink/rlinklib
|
rri/rri_serport -> rlink/rlink_serport
|
rri/rri_serport -> rlink/rlink_serport
|
rri/tb/rritb_sres_or_mon -> rbus/rb_sres_or_mon
|
rri/tb/rritb_sres_or_mon -> rbus/rb_sres_or_mon
|
- the rri test bench monitors were reorganized and renamed
|
- the rri test bench monitors were reorganized and renamed
|
rri/tb/rritb_cpmon -> rlink/rlink_mon
|
rri/tb/rritb_cpmon -> rlink/rlink_mon
|
rri/tb/rritb_cpmon_sb -> rlink/rlink_mon_sb
|
rri/tb/rritb_cpmon_sb -> rlink/rlink_mon_sb
|
rri/tb/rritb_rbmon -> rbus/rb_mon
|
rri/tb/rritb_rbmon -> rbus/rb_mon
|
rri/tb/rritb_rbmon_sb -> rbus/rb_mon_sb
|
rri/tb/rritb_rbmon_sb -> rbus/rb_mon_sb
|
- the rri low level test bench were also renamed
|
- the rri low level test bench were also renamed
|
rri/tb/tb_rri -> rlink/tb/tb_rlink
|
rri/tb/tb_rri -> rlink/tb/tb_rlink
|
rri/tb/tb_rri_core -> rlink/tb/tb_rlink_direct
|
rri/tb/tb_rri_core -> rlink/tb/tb_rlink_direct
|
rri/tb/tb_rri_serport -> rlink/tb/tb_rlink_serport
|
rri/tb/tb_rri_serport -> rlink/tb/tb_rlink_serport
|
- the base modules for rlink+cext based test benches were renamed
|
- the base modules for rlink+cext based test benches were renamed
|
rri/tb/rritb_core_cm -> rlink/tb/tbcore_rlink_dcm
|
rri/tb/rritb_core_cm -> rlink/tb/tbcore_rlink_dcm
|
rri/tb/rritb_core -> rlink/tb/tbcore_rlink
|
rri/tb/rritb_core -> rlink/tb/tbcore_rlink
|
rri/tb/vhpi_rriext -> rlink/tb/rlink_cext_vhpi
|
rri/tb/vhpi_rriext -> rlink/tb/rlink_cext_vhpi
|
rri/tb/cext_rriext.c -> rlink/tb/rlink_cext.c
|
rri/tb/cext_rriext.c -> rlink/tb/rlink_cext.c
|
|
|
- other rri/rbus related renames
|
- other rri/rbus related renames
|
bplib/s3board/s3_humanio_rri -> s3_humanio_rbus
|
bplib/s3board/s3_humanio_rri -> s3_humanio_rbus
|
w11a/pdp11_core_rri -> pdp11_core_rbus
|
w11a/pdp11_core_rri -> pdp11_core_rbus
|
|
|
- other renames
|
- other renames
|
w11a/tb/tb_pdp11_core -> tb_pdp11core
|
w11a/tb/tb_pdp11_core -> tb_pdp11core
|
|
|
- signal renames:
|
- signal renames:
|
- rlink interface (defined in rlink/rlinklib.vhd):
|
- rlink interface (defined in rlink/rlinklib.vhd):
|
- rename rlink port signals:
|
- rename rlink port signals:
|
CP_* -> RL_*
|
CP_* -> RL_*
|
- rename status bit names to better reflect their usage in v3:
|
- rename status bit names to better reflect their usage in v3:
|
ccrc -> cerr - indicates cmd crc error or other cmd level abort
|
ccrc -> cerr - indicates cmd crc error or other cmd level abort
|
dcrc -> derr - indicates data crc error or other data level abort
|
dcrc -> derr - indicates data crc error or other data level abort
|
ioto -> rbnak - indicates rbus abort, either no ack or timeout
|
ioto -> rbnak - indicates rbus abort, either no ack or timeout
|
ioerr -> rberr - indicates that rbus err flag was set
|
ioerr -> rberr - indicates that rbus err flag was set
|
|
|
- migrate to rbus protocol version 3
|
- migrate to rbus protocol version 3
|
- in rb_mreq use now aval,re,we instead of req,we
|
- in rb_mreq use now aval,re,we instead of req,we
|
- basic rbus transaction now takes 2 cycles, one for address select, one
|
- basic rbus transaction now takes 2 cycles, one for address select, one
|
for data exchange. Same concept and reasoning behind as in ibus V2.
|
for data exchange. Same concept and reasoning behind as in ibus V2.
|
|
|
- vlib/rlink/rlink_core
|
- vlib/rlink/rlink_core
|
- cerr and derr state flags now set on command or data crc errors as well
|
- cerr and derr state flags now set on command or data crc errors as well
|
as on eop/nak aborts when command or wblk data is received.
|
as on eop/nak aborts when command or wblk data is received.
|
- has now 'monitor port', RL_MONI.
|
- has now 'monitor port', RL_MONI.
|
- RL_FLUSH port removed, the flush logic is now in rlink_serport
|
- RL_FLUSH port removed, the flush logic is now in rlink_serport
|
|
|
- restructured rlink modules
|
- restructured rlink modules
|
- rlink_core is the rlink protocol engine with a 9 bit wide interface
|
- rlink_core is the rlink protocol engine with a 9 bit wide interface
|
- rlink_rlb2rl (new) is an adapter to a byte wide interface
|
- rlink_rlb2rl (new) is an adapter to a byte wide interface
|
- rlink_base (new) combines rlink_core and rlink_rlb2rl
|
- rlink_base (new) combines rlink_core and rlink_rlb2rl
|
- rlink_serport (re-written) is an adapter to a serial interface
|
- rlink_serport (re-written) is an adapter to a serial interface
|
- rlink_base_serport (renamed) combines rlink_base and rlink_serport
|
- rlink_base_serport (renamed) combines rlink_base and rlink_serport
|
|
|
- New features
|
|
- vlib/rbus
|
|
- added several rbus devices useful for debugging
|
|
- rbd_tester: test target, used for example in test benches
|
|
|
|
- trunk (2010-11-28: svn rev 8(oc) 341(wfjm); untagged w11a_V0.51) +++++++++++
|
- trunk (2010-11-28: svn rev 8(oc) 341(wfjm); untagged w11a_V0.51) +++++++++++
|
|
|
- Summary
|
- Summary
|
- Introduce ibus protocol V2
|
- Introduce ibus protocol V2
|
- Nexys2 systems use DCM
|
- Nexys2 systems use DCM
|
- sys_w11a_n2 now runs with 58 MHz
|
- sys_w11a_n2 now runs with 58 MHz
|
|
|
|
- New features
|
|
- ibus
|
|
- added ib_sres_or_mon to check for miss-behaving ibus devices
|
|
- added ib_sel to encapsulate address select logic
|
|
- nexys2 systems
|
|
- now DCM derived system clock supported
|
|
- sys_gen/w11a/nexys2
|
|
- sys_w11a_n2 now runs with 58 MHz clksys
|
|
|
- Changes
|
- Changes
|
- module renames:
|
- module renames:
|
- in future 'box' is used for large autonomous blocks, therefore use
|
- in future 'box' is used for large autonomous blocks, therefore use
|
the term unit for purely sequential logic modules:
|
the term unit for purely sequential logic modules:
|
pdp11_abox -> pdp11_ounit
|
pdp11_abox -> pdp11_ounit
|
pdp11_dbox -> pdp11_aunit
|
pdp11_dbox -> pdp11_aunit
|
pdp11_lbox -> pdp11_lunit
|
pdp11_lbox -> pdp11_lunit
|
pdp11_mbox -> pdp11_munit
|
pdp11_mbox -> pdp11_munit
|
|
|
- signal renames:
|
- signal renames:
|
- renamed RRI_LAM -> RB_LAM in all ibus devices
|
- renamed RRI_LAM -> RB_LAM in all ibus devices
|
- renamed CLK -> I_CLK50 in all top level nexys2 and s3board designs
|
- renamed CLK -> I_CLK50 in all top level nexys2 and s3board designs
|
|
|
- migrate to ibus protocol version 2
|
- migrate to ibus protocol version 2
|
- in ib_mreq use now aval,re,we,rmw instead of req,we,dip
|
- in ib_mreq use now aval,re,we,rmw instead of req,we,dip
|
- basic ibus transaction now takes 2 cycles, one for address select, one
|
- basic ibus transaction now takes 2 cycles, one for address select, one
|
for data exchange. This avoids too long logic paths in the ibus logic.
|
for data exchange. This avoids too long logic paths in the ibus logic.
|
|
|
- New features
|
|
- ibus
|
|
- added ib_sres_or_mon to check for miss-behaving ibus devices
|
|
- added ib_sel to encapsulate address select logic
|
|
- nexys2 systems
|
|
- now DCM derived system clock supported
|
|
- sys_gen/w11a/nexys2
|
|
- sys_w11a_n2 now runs with 58 MHz clksys
|
|
|
|
- Bug fixes
|
- Bug fixes
|
- rtl/vlib/Makefile.xflow: use default .opt files under rtl/vlib again.
|
- rtl/vlib/Makefile.xflow: use default .opt files under rtl/vlib again.
|
|
|
- w11a_V0.5 (2010-07-23) +++++++++++++++++++++++++++++++++++++++++++++++++++++
|
- w11a_V0.5 (2010-07-23) +++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
Initial release with
|
Initial release with
|
- w11a CPU core
|
- w11a CPU core
|
- basic set of peripherals: kw11l, dl11, lp11, pc11, rk11/rk05
|
- basic set of peripherals: kw11l, dl11, lp11, pc11, rk11/rk05
|
- just for fun: iist (not fully implemented and tested yet)
|
- just for fun: iist (not fully implemented and tested yet)
|
- two complete system configurations with
|
- two complete system configurations with
|
- for a Digilent S3BOARD rtl/sys_gen/w11a/s3board/sys_w11a_s3
|
- for a Digilent S3BOARD rtl/sys_gen/w11a/s3board/sys_w11a_s3
|
- for a Digilent Nexys2 rtl/sys_gen/w11a/nexys2/sys_w11a_n2
|
- for a Digilent Nexys2 rtl/sys_gen/w11a/nexys2/sys_w11a_n2
|
|
|