# $Id: INSTALL.txt 511 2013-04-27 13:51:46Z mueller $
|
# $Id: INSTALL.txt 512 2013-04-28 07:44:02Z mueller $
|
|
|
Guide to install and build w11a systems, test benches and support software
|
Guide to install and build w11a systems, test benches and support software
|
|
|
Table of content:
|
Table of content:
|
|
|
1. Download
|
1. Download
|
2. System requirements
|
2. System requirements
|
3. Setup system environment
|
3. Setup system environment
|
a. Setup environment variables
|
a. Setup environment variables
|
b. Setup USB access
|
b. Setup USB access
|
4. Compile UNISIM/SIMPRIM libraries for ghdl
|
4. Compile UNISIM/SIMPRIM libraries for ghdl
|
5. Compile and install the support software
|
5. Compile and install the support software
|
a. Compile sharable libraries
|
a. Compile sharable libraries
|
b. Setup Tcl packages
|
b. Setup Tcl packages
|
c. Rebuild Cypress FX2 firmware
|
c. Rebuild Cypress FX2 firmware
|
6. The build system
|
6. The build system
|
7. Building test benches
|
7. Building test benches
|
a. General instructions
|
a. General instructions
|
b. Available test benches
|
b. Available test benches
|
8. Building systems
|
8. Building systems
|
a. General instructions
|
a. General instructions
|
b. Configuring FPGAs
|
b. Configuring FPGAs
|
c. Available systems
|
c. Available systems
|
9. Generate Doxygen based source code view
|
9. Generate Doxygen based source code view
|
|
|
1. Download ---------------------------------------------------------------
|
1. Download ---------------------------------------------------------------
|
|
|
All instructions below assume that the project files reside in a
|
All instructions below assume that the project files reside in a
|
working directory with the name represented as
|
working directory with the name represented as
|
|
|
To download latest tagged version (V0.5) of w11a
|
To download latest tagged version (V0.5) of w11a
|
|
|
cd
|
cd
|
svn co http://opencores.org/ocsvn/w11/w11/tags/w11a_V0.5
|
svn co http://opencores.org/ocsvn/w11/w11/tags/w11a_V0.5
|
|
|
To download latest snapshot of trunk
|
To download latest snapshot of trunk
|
|
|
cd
|
cd
|
svn co http://opencores.org/ocsvn/w11/w11/trunk
|
svn co http://opencores.org/ocsvn/w11/w11/trunk
|
|
|
2. System requirements ----------------------------------------------------
|
2. System requirements ----------------------------------------------------
|
|
|
This project contains not only VHDL code but also support software. Therefore
|
This project contains not only VHDL code but also support software. Therefore
|
quite a few software packages are expected to be installed. The following
|
quite a few software packages are expected to be installed. The following
|
list gives the Ubuntu/Debian package names, but mapping this to other
|
list gives the Ubuntu/Debian package names, but mapping this to other
|
distributions should be straight forward.
|
distributions should be straight forward.
|
|
|
- building the bit files for the FPGAs requires a Xilinx WebPACK installation
|
- building the bit files for the FPGAs requires a Xilinx WebPACK installation
|
|
|
- building and using the RLink backend software requires:
|
- building and using the RLink backend software requires:
|
- full C/C++ development chain (gcc,g++,cpp,make)
|
- full C/C++ development chain (gcc,g++,cpp,make)
|
-> package: build-essential
|
-> package: build-essential
|
- Boost C++ library (>= 1.40), with date-time, thread, and regex
|
- Boost C++ library (>= 1.40), with date-time, thread, and regex
|
-> package: libboost-dev libboost-date-time-dev libboost-thread-dev
|
-> package: libboost-dev libboost-date-time-dev libboost-thread-dev
|
libboost-regex-dev
|
libboost-regex-dev
|
- libusb 1.0 (>= 1.0.6)
|
- libusb 1.0 (>= 1.0.6)
|
-> package: libusb-1.0-0-dev
|
-> package: libusb-1.0-0-dev
|
- Perl (>= 5.10) (usually included in base installations)
|
- Perl (>= 5.10) (usually included in base installations)
|
- Tcl (>= 8.4), with tclreadline support
|
- Tcl (>= 8.4), with tclreadline support
|
-> package: tcl tcl-dev tcllib tclreadline
|
-> package: tcl tcl-dev tcllib tclreadline
|
|
|
- the download contains pre-build firmware images for the Cypress FX2
|
- the download contains pre-build firmware images for the Cypress FX2
|
USB Interface. Re-building them requires
|
USB Interface. Re-building them requires
|
- Small Device C Compiler
|
- Small Device C Compiler
|
-> package: sdcc sdcc-ucsim
|
-> package: sdcc sdcc-ucsim
|
|
|
- for FX2 firmware download and jtag programming over USB one needs
|
- for FX2 firmware download and jtag programming over USB one needs
|
- fxload
|
- fxload
|
-> package: fxload
|
-> package: fxload
|
- urjtag
|
- urjtag
|
-> package: urjtag for Ubuntu 12.04
|
-> package: urjtag for Ubuntu 12.04
|
-> see INSTALL_urjtag.txt for other distributions !!
|
-> see INSTALL_urjtag.txt for other distributions !!
|
|
|
- for VHDL simulations one needs
|
- for VHDL simulations one needs
|
- ghdl
|
- ghdl
|
-> see INSTALL_ghdl.txt for the unfortunately gory details
|
-> see INSTALL_ghdl.txt for the unfortunately gory details
|
|
|
- for doxygen documentation an up-to-date installation of doxygen is
|
- for doxygen documentation an up-to-date installation of doxygen is
|
required, version 1.8.3.1 or later
|
required, version 1.8.3.1 or later
|
|
|
- optional but very useful is:
|
- optional but very useful is:
|
- gtkwave
|
- gtkwave
|
-> package: gtkwave
|
-> package: gtkwave
|
|
|
3. Setup system environment -----------------------------------------------
|
3. Setup system environment -----------------------------------------------
|
|
|
3a. Setup environment variables --------------------------------------
|
3a. Setup environment variables --------------------------------------
|
|
|
The make flow for building test benches (ghdl and ISim based) and systems
|
The make flow for building test benches (ghdl and ISim based) and systems
|
(Xilinx xst based) as well as the support software (mainly the rlink backend
|
(Xilinx xst based) as well as the support software (mainly the rlink backend
|
server) requires
|
server) requires
|
|
|
- the definition of the environment variables:
|
- the definition of the environment variables:
|
- RETROBASE: must refer to the installation root directory
|
- RETROBASE: must refer to the installation root directory
|
- TCLINC: pathname for includes of Tcl runtime library
|
- TCLINC: pathname for includes of Tcl runtime library
|
- RETRO_FX2_VID and RETRO_FX2_PID: default USB VID/PID, see below
|
- RETRO_FX2_VID and RETRO_FX2_PID: default USB VID/PID, see below
|
- that the tools binary directory is in the path
|
- that the tools binary directory is in the path
|
- that the tools library directory is in the library path
|
- that the tools library directory is in the library path
|
- optional environment variables:
|
- optional environment variables:
|
- BOOSTINC: pathname for includes of boost library
|
- BOOSTINC: pathname for includes of boost library
|
- BOOSTLIB: pathname for libraries of boost library
|
- BOOSTLIB: pathname for libraries of boost library
|
{Note: Either both must be undefined, or both must be defined}
|
{Note: Either both must be undefined, or both must be defined}
|
|
|
For bash and alike use
|
For bash and alike use
|
|
|
export RETROBASE=
|
export RETROBASE=
|
export PATH=$PATH:$RETROBASE/tools/bin
|
export PATH=$PATH:$RETROBASE/tools/bin
|
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$RETROBASE/tools/lib
|
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$RETROBASE/tools/lib
|
|
|
In most cases the boost library version coming with the distribution will
|
In most cases the boost library version coming with the distribution will
|
work, similar for Tcl, in those cases simply use
|
work, similar for Tcl, in those cases simply use
|
|
|
export TCLINC=/usr/include/tcl8.5
|
export TCLINC=/usr/include/tcl8.5
|
|
|
and don't setup BOOSTINC and BOOSTLIB.
|
and don't setup BOOSTINC and BOOSTLIB.
|
|
|
After that building functional model based test benches will work. If you
|
After that building functional model based test benches will work. If you
|
want to also build post-xst or post-par test benches read next section.
|
want to also build post-xst or post-par test benches read next section.
|
|
|
If the Cypress USB controller available on Digilent Nexys2, Nexys3 and
|
If the Cypress USB controller available on Digilent Nexys2, Nexys3 and
|
Atlys boards is used the default USB VID and PID is defined by two
|
Atlys boards is used the default USB VID and PID is defined by two
|
environment variables. For internal lab use one can use
|
environment variables. For internal lab use one can use
|
|
|
export RETRO_FX2_VID=16c0
|
export RETRO_FX2_VID=16c0
|
export RETRO_FX2_PID=03ef
|
export RETRO_FX2_PID=03ef
|
|
|
!! Carefully read the disclaimer about usage of USB VID/PID numbers !!
|
!! Carefully read the disclaimer about usage of USB VID/PID numbers !!
|
!! in the file README_USB-VID-PID.txt. You'll be responsible for any !!
|
!! in the file README_USB-VID-PID.txt. You'll be responsible for any !!
|
!! misuse of the defaults provided with the project sources. !!
|
!! misuse of the defaults provided with the project sources. !!
|
!! Usage of this VID/PID in any commercial product is forbidden. !!
|
!! Usage of this VID/PID in any commercial product is forbidden. !!
|
|
|
3b. Setup USB access -------------------------------------------------
|
3b. Setup USB access -------------------------------------------------
|
|
|
For using the Cypress FX2 USB interface on Digilent Nexys2, Nexys3 and
|
For using the Cypress FX2 USB interface on Digilent Nexys2, Nexys3 and
|
Atlys boards 'udev' rules must be setup to allow user level access to
|
Atlys boards 'udev' rules must be setup to allow user level access to
|
these devices. A set of rules is provided under
|
these devices. A set of rules is provided under
|
|
|
$RETROBASE/tools/fx2/sys
|
$RETROBASE/tools/fx2/sys
|
|
|
Follow the 'README.txt' file in this directory.
|
Follow the 'README.txt' file in this directory.
|
|
|
Notes:
|
Notes:
|
- the provided udev rules use the VID/PID for 'internal lab use' as
|
- the provided udev rules use the VID/PID for 'internal lab use' as
|
described above. If other VID/PID used the file must be modified.
|
described above. If other VID/PID used the file must be modified.
|
- your user account must be in group 'plugdev' (should be the default).
|
- your user account must be in group 'plugdev' (should be the default).
|
|
|
4. Compile UNISIM/SIMPRIM libraries for ghdl ------------------------------
|
4. Compile UNISIM/SIMPRIM libraries for ghdl ------------------------------
|
|
|
The build system for test benches also supports test benches run against
|
The build system for test benches also supports test benches run against
|
the gate level models derived after the xst, map or par step. In this
|
the gate level models derived after the xst, map or par step. In this
|
case ghdl has to link against a compiled UNISIM or SIMPRIM library.
|
case ghdl has to link against a compiled UNISIM or SIMPRIM library.
|
|
|
To make handling of the parallel installion of several WebPack versions
|
To make handling of the parallel installion of several WebPack versions
|
easy the compiled libraries are stored in sub-directories under $XILINX:
|
easy the compiled libraries are stored in sub-directories under $XILINX:
|
|
|
$XILINX/ghdl/unisim
|
$XILINX/ghdl/unisim
|
$XILINX/ghdl/simprim
|
$XILINX/ghdl/simprim
|
|
|
Two helper scripts will create these libraries:
|
Two helper scripts will create these libraries:
|
|
|
|
|
|
|
cd $RETROBASE
|
cd $RETROBASE
|
xilinx_ghdl_unisim
|
xilinx_ghdl_unisim
|
xilinx_ghdl_simprim
|
xilinx_ghdl_simprim
|
|
|
If you have several WebPack versions installed, repeat for each version.
|
If you have several WebPack versions installed, repeat for each version.
|
|
|
5. Compile and install the support software -------------------------------
|
5. Compile and install the support software -------------------------------
|
|
|
5a. Compile sharable libraries ---------------------------------------
|
5a. Compile sharable libraries ---------------------------------------
|
|
|
Required tools and libraries:
|
Required tools and libraries:
|
g++ >= 4.3 (decltype support assumed in usage of boost::bind)
|
g++ >= 4.3 (decltype support assumed in usage of boost::bind)
|
boost >= 1.35 (boost::thread api changed, new one is used)
|
boost >= 1.35 (boost::thread api changed, new one is used)
|
linusb >= 1.0.5 (timerfd support)
|
linusb >= 1.0.5 (timerfd support)
|
|
|
Build was tested under:
|
Build was tested under:
|
ubuntu lucid (12.04 LTS): gcc 4.6.3 boost 1.46.1 libusb 1.0.9
|
ubuntu lucid (12.04 LTS): gcc 4.6.3 boost 1.46.1 libusb 1.0.9
|
debian squezze (6.0.6): gcc 4.4.5 boost 1.46.1 libusb 1.0.8
|
debian squezze (6.0.6): gcc 4.4.5 boost 1.46.1 libusb 1.0.8
|
|
|
To build all sharable libraries
|
To build all sharable libraries
|
|
|
cd $RETROBASE/tools/src
|
cd $RETROBASE/tools/src
|
make -j 4
|
make -j 4
|
|
|
To cleanup, e.g. before a re-build
|
To cleanup, e.g. before a re-build
|
|
|
cd $RETROBASE/tools/src
|
cd $RETROBASE/tools/src
|
rm_dep
|
rm_dep
|
make realclean
|
make realclean
|
|
|
5b. Setup Tcl environment --------------------------------------------
|
5b. Setup Tcl environment --------------------------------------------
|
|
|
The Tcl files are organized in several packages. To create the Tcl
|
The Tcl files are organized in several packages. To create the Tcl
|
package files (pkgIndex.tcl)
|
package files (pkgIndex.tcl)
|
|
|
cd $RETROBASE/tools/tcl
|
cd $RETROBASE/tools/tcl
|
setup_packages
|
setup_packages
|
|
|
To use these packages it is convenient to make them available via the
|
To use these packages it is convenient to make them available via the
|
'auto_path' mechanism. To do that add in your .tclshrc or .wishrc
|
'auto_path' mechanism. To do that add in your .tclshrc or .wishrc
|
|
|
lappend auto_path [file join $env(RETROBASE) tools tcl]
|
lappend auto_path [file join $env(RETROBASE) tools tcl]
|
lappend auto_path [file join $env(RETROBASE) tools lib]
|
lappend auto_path [file join $env(RETROBASE) tools lib]
|
|
|
The w11 distribution contains two ready to use .tclshrc or .wishrc
|
The w11 distribution contains two ready to use .tclshrc or .wishrc
|
files which
|
files which
|
- include the auto_path statements above
|
- include the auto_path statements above
|
- activate tclreadline (and thus in tclshrc an event loop)
|
- activate tclreadline (and thus in tclshrc an event loop)
|
|
|
To use them simply copy them into your home directory (or soft link them)
|
To use them simply copy them into your home directory (or soft link them)
|
|
|
cd $HOME
|
cd $HOME
|
ln -s $RETROBASE/tools/tcl/.tclshrc .
|
ln -s $RETROBASE/tools/tcl/.tclshrc .
|
ln -s $RETROBASE/tools/tcl/.wishrc .
|
ln -s $RETROBASE/tools/tcl/.wishrc .
|
|
|
5c. Rebuild Cypress FX2 firmware -------------------------------------
|
5c. Rebuild Cypress FX2 firmware -------------------------------------
|
|
|
The download includes pre-build firmware images for the Cypress FX2
|
The download includes pre-build firmware images for the Cypress FX2
|
USB interface used on the Digilent Nexys2, Nexys3 and Atlys Boards.
|
USB interface used on the Digilent Nexys2, Nexys3 and Atlys Boards.
|
These firmware images are under
|
These firmware images are under
|
|
|
$RETROBASE/tools/fx2/bin
|
$RETROBASE/tools/fx2/bin
|
|
|
To re-build them, e.g. because a different USB VID/PID is to be used
|
To re-build them, e.g. because a different USB VID/PID is to be used
|
|
|
cd $RETROBASE/tools/fx2/src
|
cd $RETROBASE/tools/fx2/src
|
make clean
|
make clean
|
make
|
make
|
make install
|
make install
|
|
|
Please read README_USB_VID-PID.txt carefully to understand the usage
|
Please read README_USB_VID-PID.txt carefully to understand the usage
|
of USB VID and PID.
|
of USB VID and PID.
|
|
|
6. The build system -------------------------------------------------------
|
6. The build system -------------------------------------------------------
|
|
|
Simulation and synthesis tools usually need a list of the VHDL source
|
Simulation and synthesis tools usually need a list of the VHDL source
|
files, often in proper compilation order (libraries before components).
|
files, often in proper compilation order (libraries before components).
|
The different tools have different formats of these 'project files'.
|
The different tools have different formats of these 'project files'.
|
|
|
The build system employed in this project is based on
|
The build system employed in this project is based on
|
"VHDL bill of material" or 'vbom' files
|
"VHDL bill of material" or 'vbom' files
|
which list for each vhdl source file the libraries and sources for
|
which list for each vhdl source file the libraries and sources for
|
the instantiated components, the later via their vbom, and last but
|
the instantiated components, the later via their vbom, and last but
|
not least the name of the vhdl source file. All file name are relative
|
not least the name of the vhdl source file. All file name are relative
|
to the current directory. A recursive traversal through all vbom's gives
|
to the current directory. A recursive traversal through all vbom's gives
|
for each vhld module all sources needed to compile it. The vbomconv script
|
for each vhld module all sources needed to compile it. The vbomconv script
|
in tools/bin does this, and generates depending on options
|
in tools/bin does this, and generates depending on options
|
- make dependency files
|
- make dependency files
|
- ISE xst project files
|
- ISE xst project files
|
- ISE ISim project files
|
- ISE ISim project files
|
- ghdl commands for analysis, inspection and make step
|
- ghdl commands for analysis, inspection and make step
|
|
|
The master make files contain pattern rules like
|
The master make files contain pattern rules like
|
%.ngc : %.vbom -- synthesize with xst
|
%.ngc : %.vbom -- synthesize with xst
|
% : %.vbom -- build functional model test bench
|
% : %.vbom -- build functional model test bench
|
which encapsulate all the vbomconf magic
|
which encapsulate all the vbomconf magic
|
|
|
A full w11a is build from more than 80 source files, test benches from
|
A full w11a is build from more than 80 source files, test benches from
|
even more. Using the vbom's a large number of designs can be easily
|
even more. Using the vbom's a large number of designs can be easily
|
maintained.
|
maintained.
|
|
|
7. Building test benches --------------------------------------------------
|
7. Building test benches --------------------------------------------------
|
|
|
7a. General instructions ---------------------------------------------
|
7a. General instructions ---------------------------------------------
|
|
|
To compile a test bench named all is needed is
|
To compile a test bench named all is needed is
|
|
|
make
|
make
|
|
|
The make file will use .vbom, create all make dependency files,
|
The make file will use .vbom, create all make dependency files,
|
and generate the needed ghdl commands.
|
and generate the needed ghdl commands.
|
|
|
In many cases the test benches can also be compiled against the gate
|
In many cases the test benches can also be compiled against the gate
|
level models derived after the xst, map or par step. To compile them
|
level models derived after the xst, map or par step. To compile them
|
|
|
make ghdl_tmp_clean
|
make ghdl_tmp_clean
|
make _ssim # for post-xst
|
make _ssim # for post-xst
|
make _fsim # for post-map
|
make _fsim # for post-map
|
make _tsim # for post-par
|
make _tsim # for post-par
|
|
|
The 'make ghdl_tmp_clean' is needed to flush the ghdl work area from
|
The 'make ghdl_tmp_clean' is needed to flush the ghdl work area from
|
the compilation remains of earlier functional model compiles.
|
the compilation remains of earlier functional model compiles.
|
|
|
7b. Available test benches -------------------------------------------
|
7b. Available test benches -------------------------------------------
|
|
|
See file w11a_tb_guide.txt
|
See file w11a_tb_guide.txt
|
|
|
8. Building systems -------------------------------------------------------
|
8. Building systems -------------------------------------------------------
|
|
|
8a. General instructions ---------------------------------------------
|
8a. General instructions ---------------------------------------------
|
|
|
To generate a bit file for a system named all is needed is
|
To generate a bit file for a system named all is needed is
|
|
|
make .bit
|
make .bit
|
|
|
The make file will use .vbom, create all make dependency files, build
|
The make file will use .vbom, create all make dependency files, build
|
the ucf file with cpp, and run the synthesis flow (xst, ngdbuild, par, trce).
|
the ucf file with cpp, and run the synthesis flow (xst, ngdbuild, par, trce).
|
The log files will be named
|
The log files will be named
|
|
|
_xst.log # xst log file
|
_xst.log # xst log file
|
_tra.log # translate (ngdbuild) log file (renamed %.bld)
|
_tra.log # translate (ngdbuild) log file (renamed %.bld)
|
_map.log # map log file (renamed %_map.mrp)
|
_map.log # map log file (renamed %_map.mrp)
|
_par.log # par log file (renamed %.par)
|
_par.log # par log file (renamed %.par)
|
_pad.log # pad file (renamed %_pad.txt)
|
_pad.log # pad file (renamed %_pad.txt)
|
_twr.log # trce log file (renamed %.twr)
|
_twr.log # trce log file (renamed %.twr)
|
|
|
To load the bitfile with WebPack impact into the target board use
|
To load the bitfile with WebPack impact into the target board use
|
|
|
make .iconfig
|
make .iconfig
|
|
|
For boards with a Cypress FX2 USB controller load the bitfile directly with
|
For boards with a Cypress FX2 USB controller load the bitfile directly with
|
|
|
make .jconfig
|
make .jconfig
|
|
|
If only the xst or par output is wanted just use
|
If only the xst or par output is wanted just use
|
|
|
make .ngc
|
make .ngc
|
make .ncd
|
make .ncd
|
|
|
A simple 'message filter' system is also integrated into the make build flow.
|
A simple 'message filter' system is also integrated into the make build flow.
|
For many (though not all) systems a .mfset file has been provided which
|
For many (though not all) systems a .mfset file has been provided which
|
defines the xst,par and bitgen messages which are considered ok. To see
|
defines the xst,par and bitgen messages which are considered ok. To see
|
only the remaining message extracted from the vaious .log files simply
|
only the remaining message extracted from the vaious .log files simply
|
use the make target
|
use the make target
|
|
|
make .mfsum
|
make .mfsum
|
|
|
after a re-build.
|
after a re-build.
|
|
|
8b. Configuring FPGAs ------------------------------------------------
|
8b. Configuring FPGAs ------------------------------------------------
|
|
|
The make flow supports also loading the bitstream into FPGAs, either
|
The make flow supports also loading the bitstream into FPGAs, either
|
via Xilinx Impact, or via the Cypress FX2 USB controller is available.
|
via Xilinx Impact, or via the Cypress FX2 USB controller is available.
|
|
|
For Xilinx Impact a Xilinx USB Cable II has to be properly setup, than
|
For Xilinx Impact a Xilinx USB Cable II has to be properly setup, than
|
simply use
|
simply use
|
|
|
make .iconfig
|
make .iconfig
|
|
|
For using the Cypress FX2 USB controller on Digilent Nexys2, Nexys3 and
|
For using the Cypress FX2 USB controller on Digilent Nexys2, Nexys3 and
|
Atlys boards just connect the USB cable and
|
Atlys boards just connect the USB cable and
|
|
|
make .jconfig
|
make .jconfig
|
|
|
This will automatically check and optionaly re-load the FX2 firmware
|
This will automatically check and optionaly re-load the FX2 firmware
|
to a version matching the FPGA design, generate a .svf file from the
|
to a version matching the FPGA design, generate a .svf file from the
|
.bit file, and configure the FPGA. In case the bit file is out-of-date
|
.bit file, and configure the FPGA. In case the bit file is out-of-date
|
the whole design will be re-implemented before.
|
the whole design will be re-implemented before.
|
|
|
8c. Available systems ------------------------------------------------
|
8c. Available systems ------------------------------------------------
|
|
|
Note: Currently ready to build versions exist for
|
Note: Currently ready to build versions exist for
|
Digilent S3BOARD (-1000 FPGA version)
|
Digilent S3BOARD (-1000 FPGA version)
|
Digilent Nexys2 board (-1200 FPGA version)
|
Digilent Nexys2 board (-1200 FPGA version)
|
Digilent Nexys3 board
|
Digilent Nexys3 board
|
|
|
1. rlink tester
|
1. rlink tester
|
a. for Digilent Nexys2 board
|
a. for Digilent Nexys2 board
|
|
|
cd $RETROBASE/rtl/sys_gen/tst_rlink/nexys2
|
cd $RETROBASE/rtl/sys_gen/tst_rlink/nexys2
|
make sys_tst_rlink_n2.bit
|
make sys_tst_rlink_n2.bit
|
|
|
b. for Digilent Nexys3 board
|
b. for Digilent Nexys3 board
|
|
|
cd $RETROBASE/rtl/sys_gen/tst_rlink/nexys3
|
cd $RETROBASE/rtl/sys_gen/tst_rlink/nexys3
|
make sys_tst_rlink_n3.bit
|
make sys_tst_rlink_n3.bit
|
|
|
2. rlink over USB tester
|
2. rlink over USB tester
|
a. for Digilent Nexys2 board
|
a. for Digilent Nexys2 board
|
|
|
cd $RETROBASE/rtl/sys_gen/tst_rlink_cuff/nexys2/ic
|
cd $RETROBASE/rtl/sys_gen/tst_rlink_cuff/nexys2/ic
|
make sys_tst_rlink_cuff_ic_n2.bit
|
make sys_tst_rlink_cuff_ic_n2.bit
|
|
|
|
b. for Digilent Nexys3 board
|
|
|
|
cd $RETROBASE/rtl/sys_gen/tst_rlink_cuff/nexys3/ic
|
|
make sys_tst_rlink_cuff_ic_n3.bit
|
|
|
3. w11a systems
|
3. w11a systems
|
a. for Digilent S3BOARD
|
a. for Digilent S3BOARD
|
|
|
cd $RETROBASE/rtl/sys_gen/w11a/s3board
|
cd $RETROBASE/rtl/sys_gen/w11a/s3board
|
make sys_w11a_s3.bit
|
make sys_w11a_s3.bit
|
|
|
b. for Digilent Nexys2 board
|
b. for Digilent Nexys2 board
|
|
|
cd $RETROBASE/rtl/sys_gen/w11a/nexys2
|
cd $RETROBASE/rtl/sys_gen/w11a/nexys2
|
make sys_w11a_n2.bit
|
make sys_w11a_n2.bit
|
|
|
c. for Digilent Nexys3 board
|
c. for Digilent Nexys3 board
|
|
|
cd $RETROBASE/rtl/sys_gen/w11a/nexys3
|
cd $RETROBASE/rtl/sys_gen/w11a/nexys3
|
make sys_w11a_n3.bit
|
make sys_w11a_n3.bit
|
|
|
9. Generate Doxygen based source code view --------------------------------
|
9. Generate Doxygen based source code view --------------------------------
|
|
|
Currently there is not much real documentation included in the source
|
Currently there is not much real documentation included in the source
|
files. The doxygen generated html output is nevertheless very useful
|
files. The doxygen generated html output is nevertheless very useful
|
to browse the code. C++, Tcl and Vhdl source are covered by setup files
|
to browse the code. C++, Tcl and Vhdl source are covered by setup files
|
contained in the project files.
|
contained in the project files.
|
|
|
To generate the html files
|
To generate the html files
|
|
|
cd $RETROBASE/tools/dox
|
cd $RETROBASE/tools/dox
|
export RETRODOXY
|
export RETRODOXY
|
./make_doxy
|
./make_doxy
|
|
|
If RETRODOXY is not defined '/tmp' is used. To view the docs use
|
If RETRODOXY is not defined '/tmp' is used. To view the docs use
|
|
|
firefox $RETRODOXY/w11/cpp/html/index.html &
|
firefox $RETRODOXY/w11/cpp/html/index.html &
|
firefox $RETRODOXY/w11/tcl/html/index.html &
|
firefox $RETRODOXY/w11/tcl/html/index.html &
|
firefox $RETRODOXY/w11/vhd/html/index.html &
|
firefox $RETRODOXY/w11/vhd/html/index.html &
|
|
|
