$Id: README.txt 693 2015-06-21 14:02:46Z mueller $
|
$Id: README.txt 722 2015-12-30 19:45:46Z mueller $
|
|
|
Release notes for w11a
|
Release notes for w11a
|
|
|
Table of content:
|
Table of content:
|
|
|
1. Documentation
|
1. Documentation
|
2. Change Log
|
2. Change Log
|
|
|
1. Documentation -------------------------------------------------------------
|
1. Documentation -------------------------------------------------------------
|
|
|
More detailed information on installation, build and test can be found
|
More detailed information on installation, build and test can be found
|
in the doc directory, specifically
|
in the doc directory, specifically
|
|
|
* README.txt: release notes
|
* README.txt: release notes
|
* README_known_issues.txt: known issues
|
* README_known_issues.txt: known issues
|
* INSTALL.txt: installation and building test benches and systems
|
* INSTALL.txt: installation and building test benches and systems
|
* FILES.txt: short description of the directory layout, what is where ?
|
* FILES.txt: short description of the directory layout, what is where ?
|
* w11a_tb_guide.txt: running test benches
|
* w11a_tb_guide.txt: running test benches
|
* w11a_os_guide.txt: booting operating systems
|
* w11a_os_guide.txt: booting operating systems
|
* w11a_known_issues.txt: known differences, limitations and issues
|
* w11a_known_issues.txt: known differences, limitations and issues
|
|
|
2. Change Log ----------------------------------------------------------------
|
2. Change Log ----------------------------------------------------------------
|
|
|
- w11a_V0.60 -> w11a_V0.70 cummulative summary of key changes
|
- trunk (2015-12-30: svn rev 34(oc) 722(wfjm); untagged w11a_V0.71) +++++++++
|
- Bugfix for DIV instruction (in w11a_V0.61, see ECO-026-div.txt)
|
|
- revised rbus protocol V4 (in w11a_V0.62, see README_Rlink_V4.txt)
|
|
- add basic Vivado support (in w11a_V0.64)
|
|
- add Nexys4 and Basys3 port of w11a (in w11a_V0.64)
|
|
- add RH70+RP/RM disk support (in w11a_V0.65)
|
|
- add TM11/TY10 tape support (in w11a_V0.66)
|
|
- reference system now ISE 14.7, Vivado 2014.4; Ubuntu 14.04 64 bit, ghdl 0.31
|
|
|
|
- trunk (2015-06-21: svn rev 33(oc) 693(wfjm); tagged w11a_V0.70) +++++++++++
|
|
- Preface
|
|
- resolved known issue V0.66-2: operation with multiple RP or RM disks
|
|
under 211bsd works now. Issue was caused by a faulty error check.
|
|
- resolved bug tracker issue 2015-06-06: the tm11 offline function works
|
|
now as expected. Issue was caused by de-referencing a null pointer.
|
|
- resolved bug tracker request 2015-06-05: the values returned as drive
|
|
serial number were interpreted by 211bsd standalone code as a signature
|
|
of SI drives, which made disk partitioning a bit cumbersome. Changed the
|
|
scheme used to generate drive serial numbers such that they never match
|
|
these 3rd party drive characteristics. The 211bsd installation on a
|
|
RM05 is documented with the 211bsd_tm oskit.
|
|
- the w11a designs grow larger, filling the FPGA's on Nexys2 and Nexys3
|
|
to ~50% (n2) or 67% (n3). To reach timing closure without fine tuning
|
|
constraints the cpu clock had to be reduced to
|
|
sys_w11a_n2 now 52 MHz (was 54 MHz)
|
|
sys_w11a_n3 now 64 MHz (was 68 MHz)
|
|
|
|
- w11a has now a complete set of mass storage peripherals. This is a good
|
|
reason of a major release, thus go for version V0.70.
|
|
|
|
- there are many known issues, and in many cases only core functionality
|
|
used by operating systems has been implemented. The missing parts will
|
|
be implemented in the upcoming releases towards V0.80, also much more
|
|
intensive testing, especially with maindecs (aka xxdp) will be done.
|
|
|
|
- Summary
|
|
- rhrp and tm11 bug fixes
|
|
- no major functionality added
|
|
|
|
- New features
|
|
|
|
- Changes
|
|
- renames
|
|
- tools/oskit/211bsd_tm/211bsd_tm_boot.* -> 211bsd_tm_rp06_boot.*
|
|
- functional changes
|
|
- rtl/ibus/ibdr_rhrp - modify sn register to avoid 211bsd issues
|
|
- tools/bin/create_disk - support RM80 disks
|
|
- tools/tcl/rutil/util.tcl - add dohook
|
|
- tools/oskit/*/*_boot.tcl - add preinithook and preboothook
|
|
|
|
- Bug fixes
|
|
- rtl/ibus/ibdr_rhrp - set er1.rmr only when unit busy
|
|
- set cs2.pge only when controller busy
|
|
- tools/src/librw11
|
|
- Rw11CntlTM11 - fix crash when offline function was executed
|
|
|
|
- Known issues
|
|
- all issues: see README_known_issues.txt
|
|
- resolved issues:
|
|
- V0.66-2: operation with multiple RP/RM drives works now under 211bsd
|
|
|
|
- trunk (2015-06-05: svn rev 31(oc) 687(wfjm); untagged w11a_V0.66) +++++++++
|
|
- Preface
|
|
|
|
- Since the previous release a full set of small, medium and large sized
|
|
disks (RK,RL,RP/RM) is available, covering all use cases. Still missing
|
|
was a tape system, which allows to install systems from distribution tapes
|
|
but is also very handy for data exchange. This release adds a TM11/TU10
|
|
tape controller emulation. This is much simpler to implement than a
|
|
massbus based TU16 or TU78 controller. Because storage is emulated there
|
|
is neither a speed nor a capacity advantage of 1600 or 6250 bpi drives,
|
|
so for all practical purposes the simple 800 bpi TU10 drive emulation is
|
|
fully adequate.
|
|
The TM11/TU10 was tested under 211bsd with creating a tape distribution
|
|
kit and building a RP06 based system from such a tape. A 211bsd_tm
|
|
oskit is provided with a recipe to restore a RP06 from tape.
|
|
|
|
- bug fixes
|
|
- the ti_rri event loop aborted under heavy load with three devices, seen
|
|
when RP disk, TM tape and DL11 run simultaneously. Was caused by a race
|
|
condition in attention handling and dispatching.
|
|
- the boot command failed when cpu was running and the unit not decoded
|
|
properly, so boots from units other then 0 failed.
|
|
|
|
- Summary
|
|
- added TM11/TU10 tape support
|
|
|
|
- New features
|
|
- new modules
|
|
- rtl/ibus/ibdr_rm11 - ibus controller for RM11
|
|
- tools/bin
|
|
- file2tap - create a tap container from disk files
|
|
- tap2file - split a tap container into disk files
|
|
- tools/src/librw11
|
|
- Rw11(Cntl|Unit)TM11 - Controller/Unit for TM11
|
|
- Rw11UnitTape(|Base) - support for tape units
|
|
- Rw11VirtTape(|Tap) - virtual tapes (generic and tap containers)
|
|
- tools/tcl/rw11
|
|
- tbench.tcl - support sub directories and return in tests
|
|
- new oskits
|
|
- tools/oskit/211bsd_tm - 2.11BSD tape distribution kit (for RP06)
|
|
|
|
- Changes
|
|
- renames
|
|
- tools/tbench - the text benches were re-organized and
|
|
grouped now in sub directories:
|
|
cp for w11a control port
|
|
w11a for w11a CPU tests
|
|
rhrp for RHRP device tests
|
|
tm11 for TM11 device tests
|
|
- functional changes
|
|
- tools/bin/create_disk - add RM80 support
|
|
|
|
- Bug fixes
|
|
- tools/src/librlink
|
|
- RlinkServer - fix race condition in attention handling
|
|
- tools/src/librw11
|
|
- Rw11Cpu - stop cpu before load, proper unit handling
|
|
|
|
- Known issues
|
|
- all issues: see README_known_issues.txt
|
|
- resolved issues: -- none --
|
|
- new issues:
|
|
- V0.66-1: the TM11 controller transfers data byte wise (all disk do it
|
|
16bit word wise) and allows for odd byte length transfers. Odd length
|
|
transfers are currently not supported and rejected as invalid command.
|
|
Odd byte length records aren't used by OS, if at all, so in practice
|
|
this limitation isn't relevant.
|
|
- V0.66-2: using two RP06 drives in parallel under 211bsd leads to a
|
|
hangup of the system after a short time. Currently only operation
|
|
of a single drive works reliably.
|
|
|
|
- trunk (2015-05-14: svn rev 30(oc) 681(wfjm); untagged w11a_V0.65) +++++++++
|
|
- Preface
|
- Preface
|
|
- the w11a so far lacked any 'hardware debugger' support, which made the
|
- With small RK05 or RL02 sized disks only quite reduced OS setups could
|
debugging of CPU core issues a bit tedious. This release added a first
|
be booted, full featured systems were beyond reach. Now finally large
|
implementation of CPU debugger and monitoring features
|
disks are available, with a RH70 + RP/RM disk controller emulation. It
|
- dmhbpt: hardware break point unit. Allows to set multiple break points
|
supports up to four disks and allows now to run full featured 211bsd
|
on instruction fetches (thus code break points) and on data
|
or rsx-11mplus systems.
|
reads/writes (thus data access break points). The number of
|
|
breakpoints is configurable between 0 and 4, in current
|
- to track down issues with ibus devices a 'ibus monitor' was added, it can
|
designs 2 are available
|
record in the default setup up to 511 ibus transactions. An address filter
|
- dmcmon: CPU state monitor. A buffer of configurable size which holds
|
allows to select accesses of one device. The ibd_ibmon tcl package
|
a wide range of information on execution of the most recent
|
contains the appropriate support scripts.
|
instructions. Tracing can be a instruction as well as on
|
|
micro cycle level.
|
- several cleanups
|
- dmscnt: micro state counter. A counter array which allows to monitor
|
- factor out common blocks on sys_w11a_* systems: the core+rbus+cache
|
in which micro state the CPU time is spend, separated for
|
logic of single cpu systems now contained in pdp11_sys70, and the
|
kernel and supervisor/user mode.
|
human I/O for digilent boards now in pdp11_hio70.
|
These three units together with the already existing ibus monitor allow
|
- cpu start/stop logic cleanup: new command set with simple commands.
|
a very detailed and specific monitoring and debugging of the CPU.
|
Add also a new suspend/resume mechanism, which allows to hold the cpu
|
|
without leaving the 'run state'. While suspended all timers are frozen.
|
The w11a CPU core is not functionally modified in this release, the only
|
Very helpful when debugging, will be the basis for a hardware break
|
exception is the suspend logic needed to implement hardware break points.
|
point logic in a later release.
|
Both the hardware break point and the instruction level tracing in dmcmon
|
- xon/xoff consolidation: escaping now done in cdata2byte/byte2cdata in
|
require a clean definition of instruction boundaries, which the current
|
FPGA and in RlinkPacketBufSnd/RlinkPacketBufRcv in backend. The extra
|
w11a core does not provide in some cases. This leads to imprecise
|
escaping level in serport_xonrx/serport_xontx isn't used anymore, the
|
breakpoints (CPU executes one additional instruction) and incomplete
|
special code in RlinkPortTerm has been removed. This allows to use
|
dmcmon traces (at instruction level when exceptions are taken).
|
xon/xoff flow control also in simulation links via RlinkPortFifo.
|
|
- status check cleanup: it is very helpful to have a default status check
|
The w11a core will be modified in the next release to handle the above
|
and an easy way to modify it cases where some error flags are expected
|
mentioned conditions properly. The dmhbpt and dmcmon will be fully
|
(e.g. on device polls). In the old logic status and data checks were
|
documented when the w11a core changes are done, they work as expected
|
done via RlinkCommandExpect. The new logic reflects that status checks
|
under all conditions, and the full back end integration is completed.
|
are the normal case, and store the status check pattern in RlinkCommand.
|
|
The meaning of expect masks for status and data is inverted, now a '1'
|
- bottom line is that this release has little added value for normal w11
|
means that the bit is checked (before it meant the bit is ignored).
|
usage. It is technically necessary to separate the addition of all
|
The default status check pattern is still in RlinkContext, but will be
|
the debug units and modification of the CPU core into two releases.
|
copied to RlinkCommand when the list is processed. RlinkCommandExpect
|
|
handles now only data checks.
|
- Summary
|
|
- new reference system
|
- and bug fixes
|
- switched to Vivado 2015.4 (from 2014.4)
|
- rk11 cleanup: since the first days 211bsd autoconfig printed
|
Note: 2015.4 has WebPACK support for Logic Analyser and HLS. Both are
|
rk ? csr 177400 vector 220 didn't interrupt
|
not used so far, but the logic analyser may come in handy soon.
|
for boots from a RK11 it didn't have consequences, but when booted from
|
- switched to tcl8.6 (from tcl8.5)
|
a RL,RP, or RM disk this prevents that the RK11 disks are configured.
|
Note: tcl8.6 is default tcl in Ubuntu 2014.04LTS, but up to now the
|
Was caused by a missing interrupt after device reset. Now fixed.
|
tclshcpp helper was linked against tcl8.5. So far no tcl8.6
|
|
langauge features are used, but may be in future.
|
- Summary
|
|
- added RH70/RP/RM big disk support
|
|
- many cleanups
|
|
|
|
- New features
|
- New features
|
- new directory trees for
|
|
- tools/asm-11/lib - definitions and macros for asm-11
|
|
- new modules
|
- new modules
|
- rtl/vlib/serport
|
|
- serport_master - serial port module, master side
|
|
- rtl/ibus/ibd_ibmon - ibus monitor
|
|
- rtl/ibus/ibdr_rhrp - ibus controller for RH70 plus RP/RM drives
|
|
- rtl/w11a/pdp11_sys70 - 11/70 system - single core +rbus,debug,cache
|
|
- rtl/w11a/pdp11_hio70 - hio led and dsp for sys70
|
|
- tools/src/librw11
|
|
- Rw11(Cntl|Unit)RHRP - Controller/Unit for RHRP
|
|
- tools/tbench
|
|
- test_rhrp_* - test tbench for RHRP
|
|
- new oskits
|
|
- tools/oskit/211bsd_rp - new oskit for 2.11BSD on RP06
|
|
- tools/oskit/rsx11mp-30_rp - new oskit for RSX-11Mplus V3.0 on RP06
|
|
|
|
- Changes
|
|
- renames
|
|
- rtl/w11a/pdp11_sys70 -> pdp11_reg70 (_sys70 now different function)
|
|
- functional changes
|
|
- rtl/bplib/*/tb/tb_* - use serport_master instead of
|
|
serport_uart_rxtx, allow xon/xoff
|
|
- rtl/bplib/fx2rlink
|
|
- rlink_sp1c_fx2 - add rbd_rbmon (optional via generics)
|
|
- rtl/vlib/rlink/rlink_sp1c - add rbd_rbmon (optional via generics)
|
|
- rtl/ibus/ibd_kw11l - freeze timer when cpu suspended
|
|
- tools/bin/tbrun_tbwrri - add --fusp,--xon
|
|
- tools/bin/ti_w11 - rename -fu->-fc, add -f2,-fx; setup defaults
|
|
- tools/bin/librlink
|
|
- RlinkCommandList - add SetLastExpect() methods
|
|
- RlinkPort - add XonEnable()
|
|
- RlinkPortCuff - add noinit attribute
|
|
- RlinkPort(Fifo|Term) - add xon,noinit attributes
|
|
- tools/src/librw11
|
|
- Rw11Cpu - add AddRbibr(), AddWbibr(), RAddrMap()
|
|
- tools/bin/librlinktpp
|
|
- RtclRlinkConnect - errcnt: add -increment
|
|
log: add -bare,-info..
|
|
wtlam: allow tout=0 for attn cleanup
|
|
init: new command
|
|
exec: drop -estatdef
|
|
- RtclRlinkServer - get/set interface added
|
|
- tools/src/librwxxtpp
|
|
- RtclRw11Cntl - start: new command
|
|
- RtclRw11Cpu - cp: add -rbibr, wbibr, -rreg,...,-init
|
|
- cp: add -estat(err|nak|tout), drop estatdef
|
|
- rename amap->imap; add rmap
|
|
|
|
- Bug fixes
|
|
- rtl/ibus
|
|
- ibdr_rk11 - interrupt after dreset and seek command start
|
|
- tools/src/librlink
|
|
- RlinkConnect - WaitAttn(): return 0. (not -1.) if poll
|
|
- RlinkServer - Stop(): fix race in (could hang)
|
|
|
|
- Known issues
|
|
- all issues: see README_known_issues.txt
|
|
- resolved issues: -- none --
|
|
- new issues:
|
|
- V0.65-1: ti_rri sometimes crashes in normal rundown (exit or ^D) when
|
|
a cuff: type rlink is active. One gets
|
|
terminate called after throwing an instance of 'Retro::Rexception'
|
|
what(): RlinkPortCuff::Cleanup(): driver thread failed to stop
|
|
doesn't affect normal operation, will be fixed in upcoming release.
|
|
- V0.65-2: some exotic RH70/RP/RM features and conditions not implemented
|
|
- last block transfered flag (in DS)
|
|
- CS2.BAI currently ignored and not handled
|
|
- read or write 'with header' gives currently ILF
|
|
All this isn't used by any OS, so in practice not relevant.
|
|
|
|
- trunk (2015-03-01: svn rev 29(oc) 655(wfjm); untagged w11a_V0.64) +++++++++
|
|
|
|
- Preface
|
|
- The w11 project started on a Spartan-3 based Digilent S3board, and soon
|
|
moved on to a Nexys2 with much better connectivity. Next step was the
|
|
Spartan-6 based Nexys3. Now is time to continue with 7-Series FPGAs.
|
|
- When Vivado started in 2013 it was immediately clear that the architecture
|
|
is far superior to ISE. But tests with the first versions were sobering,
|
|
the w11a design either didn't compile at all, or produced faulty synthesis
|
|
results. In 2014 Vivado matured, and the current version 2014.4 works
|
|
fine with the w11a code base.
|
|
- The original Nexys4 board allowed to quickly port Nexys3 version because
|
|
both have the same memory chip. The newer Nexys4 DDR will be addressed
|
|
later.
|
|
- The BRAM capacity of FPGAs increased significantly over time. The low
|
|
cost Basys3 board with the second smallest Artix-7 (XC7A35T) has 200 KB
|
|
BRAM. That allows to implement a purely BRAM based w11a system with
|
|
176 kB memory. Not enough for 2.11BSD, but for many other less demanding
|
|
OS available for a PDP11.
|
|
- The Nexyx4 and Basys3 have 16 LEDs. Not quite the 'blinking lights'
|
|
console of the classic 11/45 and 11/70, but enough to display the
|
|
well known OS typical light patterns the veterans remember so well.
|
|
- With a new design tool, a new FPGA generation, two new boards, and a
|
|
new interface for the rlink connection that some of the code and tools
|
|
base had to be re-organized.
|
|
- Last but not least: finally access to a bit bigger disks: RL11 support
|
|
- Many changes, some known issues, some rough edges may still lurke around
|
|
|
|
- Summary
|
|
- added support for Vivado
|
|
- added support for Nexys4 and Basys3 boards
|
|
- added RL11 disk support
|
|
- lots of documentation updated
|
|
|
|
- New features
|
|
- new directory trees for
|
|
- rtl/bplib/basys3 - support for Digilent Basys3 board
|
|
- rtl/bplib/nexys4 - support for Digilent Nexys4 board
|
|
- rtl/make_viv - make includes for Vivado
|
|
- new files
|
|
- tools/bin/xviv_ghdl_unisim - ghdl compile Vivado UNISIM & UNIMACRO libs
|
|
- new modules
|
|
- rtl/ibus/ibdr_rl11 - ibus controller for RL11
|
|
- rtl/vlib/rlink/ioleds_sp1c - io activity leds for rlink+serport_1clk
|
|
- rtl/vlib/xlib
|
|
- s7_cmt_sfs_gsim - Series-7 CMT: simple vhdl model
|
|
- s7_cmt_sfs_unisim - Series-7 CMT: wrapper for UNISIM
|
|
- rtl/w11a
|
- rtl/w11a
|
- pdp11_bram_memctl - simple BRAM based memctl
|
- pdp11_dmcmon - pdp11: debug&moni: cpu monitor
|
- pdp11_dspmux - mux for hio display
|
- pdp11_dmhbpt - pdp11: debug&moni: hardware breakpoint
|
- pdp11_ledmux - mux for hio leds
|
- pdp11_dmhbpt_unit - pdp11: dmhbpt - individual unit
|
- pdp11_statleds - status led generator
|
- pdp11_dmscnt - pdp11: debug&moni: state counter
|
- tools/src/librw11/
|
- new files
|
- Rw11*RL11 - classes for RL11 disk handling
|
|
- tools/src/librwxxtpp
|
|
- RtclRw11*RL11 - tcl iface for RL11 disk handling
|
|
- new systems
|
|
- rtl/sys_gen/tst_rlink - rlink tester
|
|
- basys3/sys_tst_rlink_b3 - for Basys3
|
|
- nexys4/sys_tst_rlink_n4 - for Nexys4
|
|
- rtl/sys_gen/tst_serloop - serport loop tester
|
|
- nexys4/sys_tst_serloop_n4 - for Nexys4
|
|
- rtl/sys_gen/tst_snhumanio - human I/O tester
|
|
- basys3/sys_tst_snhumanio_b3 - for Basys3
|
|
- nexys4/sys_tst_snhumanio_n4 - for Nexys4
|
|
- rtl/sys_gen/w11a - w11a
|
|
- basys3/sys_w11a_b3 - small BRAM only (176 kB memory)
|
|
- nexys4/sys_w11a_n4 - with full 4 MB memory using cram
|
|
- new oskits
|
|
- tools/oskit/211bsd_rl - new oskit for 2.11BSD on RL02
|
|
- tools/oskit/rt11-53_rl - new oskit for RT11 V5.3 on RL02
|
|
- tools/oskit/xxdp_rl - new oskit for XXDP 22 and 25 on RL02
|
|
|
|
- Changes
|
|
- renames
|
|
- ensure that old ISE and new Vivado co-exists, ensure telling names
|
|
- rtl/make -> make_ise
|
|
- rtl/bplib/bpgen/sn_4x7segctl -> sn_7segctl
|
|
- tools/bin/isemsg_filter -> xise_msg_filter
|
|
- tools/bin/xilinx_ghdl_unisim -> xise_ghdl_unisim
|
|
- tools/bin/xilinx_ghdl_simprim -> xise_ghdl_simprim
|
|
|
|
- retired files
|
|
- rtl/bplib/fx2lib
|
|
- fx2_2fifoctl_as - obsolete, wasn't actively used since long
|
|
- tools/bin
|
|
- set_ftdi_lat - obsolete, since kernel 2.6.32 the default is 1 ms
|
|
- xilinx_vhdl_chop - obsolete, since ISE 11 sources come chopped
|
|
|
|
- functional changes
|
|
- $RETROBASE/Makefile - re-structured, many new targets
|
|
- rtl/bplib/bpgen
|
|
- sn_7segctl - handle also 8 digit displays
|
|
- sn_humanio - configurable SWI and DSP width
|
|
- sn_humanio_rbus - configurable SWI and DSP width
|
|
- rtl/vlib/serport
|
|
- serport_1clock - export fractional part of divider
|
|
- rtl/ibus
|
|
- ibdr_maxisys - add RL11 (ibdr_rl11)
|
|
- rtl/sys_gen/w11a/*
|
|
- sys_w11a_* - use new led and dsp control modules
|
|
- tools/src/librlink
|
|
- RlinkConnect - drop LogOpts, indivitual getter/setter
|
|
- RlinkPortTerm - support custom baud rates (5M,6M,10M,12M)
|
|
- tools/src/librtcltools
|
|
- RtclGetList - add '?' (key list) and '*' (kv list)
|
|
- RtclSetList - add '?' (key list)
|
|
- RlogFile - Open(): now with cout/cerr support
|
|
- tools/src/librlinktpp
|
|
- RtclRlinkConnect - drop config cmd, use get/set cmd
|
|
- RtclRlinkPort - drop config cmd, use get/set cmd
|
|
- tools/src/librw11
|
|
- Rw11Rdma - PreExecCB() with nwdone and nwnext
|
|
- Rw11UnitDisk - add Nwrd2Nblk()
|
|
- tools/src/librwxxtpp
|
|
- RtclRw11CntlFactory - add RL11 support
|
|
- tools/bin
|
|
- xise_ghdl_unisim - handle also UNIMACRO lib
|
|
- vbomconv - handle Vivado flows too
|
|
|
|
- Bug fixes
|
|
- tools/src/librw11
|
|
- Rw11CntlRK11 - revise RdmaPostExecCB() logic
|
|
|
|
- Known issues
|
|
- V0.64-7: ghdl simulated OS boots via ti_w11 (-n4 ect options) fail due to
|
|
a flow control issue (likely since V0.63).
|
|
- V0.64-6: IO delays still unconstraint in vivado. All critical IOs use
|
|
explicitly IOB flops, thus timing well defined.
|
|
- V0.64-5: w11a_tb_guide.txt covers only ISE based tests (see also V0.64-4).
|
|
- V0.64-4: No support for the Vivado simulator (xsim) yet. With ghdl only
|
|
functional simulations, post synthesis (_ssim) fails to compile.
|
|
- V0.64-3: Highest baud rate with basys3 and nexys4 is 10 MBaud. 10 MBaud
|
|
is not supported according to FTDI, but works. 12 MBaud in next release.
|
|
- V0.64-2: rlink throughput on basys3/nexys4 limited by serial port stack
|
|
round trip times. Will be overcome by libusb based custom driver.
|
|
- V0.64-1: The large default transfer size for disk accesses leads to bad
|
|
throughput in the DL11 emulation for low speed links, like the
|
|
460kBaud the S3board is limited too. Will be overcome by a DL11
|
|
controller with more buffering.
|
|
- V0.62-2: rlink v4 error recovery not yet implemented, will crash on error
|
|
- V0.62-1: Command lists aren't split to fit in retransmit buffer size
|
|
{last two issues not relevant for w11 backend over USB usage because
|
|
the backend produces proper command lists and the USB channel is
|
|
usually error free}
|
|
|
|
- trunk (2015-01-04: svn rev 28(oc) 629(wfjm); untagged w11a_V0.63) +++++++++
|
|
|
|
- Summary
|
|
- the w11a rbus interface used so far a narrow dynamically adjusted
|
|
rbus->ibus window. Replaces with a 4k word window for whole IO page.
|
|
- utilize rlink protocol version 4 features in w11a backend
|
|
- use attn notifies to dispatch attn handlers
|
|
- use larger blocks (7*512 rather 1*512 bytes) for rdma transfers
|
|
- use labo and merge csr updates with last block transfer
|
|
- this combined reduces the number of round trips by a factor 2 to 3,
|
|
and in some cases the throughput accordingly.
|
|
|
|
- Remarks on reference system
|
|
- still using tcl 8.5 (even though 8.6 is now default in Ub 14.04)
|
|
- don't use doxygen 1.8.8 and 1.8.9, it fails to generate vhdl docs
|
|
|
|
- New features
|
|
- new modules
|
|
- tools/bin
|
- tools/bin
|
- ghdl_assert_filter - filter to suppress startup warnings
|
- dmscntanal - analyze dmscnt data
|
- tbrun_tbw - wrapper for tbw based test benches
|
- dmscntconv - convert dmscnt data
|
- tbrun_tbwrri - wrapper for ti_rri + tbw based test benches
|
- tools/asm-11/lib
|
- tools/src/librw11
|
- defs_mmu.mac - definitions for mmu registers
|
- Rw11Rdma - Rdma engine base class
|
- defs_nzvc.mac - definitions for condition code combos
|
- Rw11RdmaDisk - Rdma engine for disk emulation
|
- defs_reg70.mac - definitions for 11/70 CPU registers
|
|
- tcode_std_base.mac - Default tcode base code for simple tests
|
|
- tcode_std_start.mac - Default tcode startup code
|
|
- vec_devcatch.mac - vector catcher for device interrupts
|
|
- vec_devcatch_reset.mac - re-write vector catcher
|
|
- tools/tbench
|
|
- w11a_cmon - directory with dmcmon tests
|
|
- w11a_hbpt - directory with dmhbpt tests
|
|
- tools/tcl
|
|
- ibd_(dl|lp|pc|rk|rl)11 - directory with register regdsc's
|
|
- tools/tcl/rutil
|
|
- fileio.tcl - new tofile and fromfile procs
|
|
- tools/tcl/rw11
|
|
- dmcmon.tcl - support code for dmcmon
|
|
- dmhbpt.tcl - support code for dmhbpt
|
|
- dmscnt.tcl - support code for dmscnt
|
|
- shell.tcl - new w11a tcl shell
|
|
- shell_egd.tcl - code for e,g,d commands
|
|
- tools/tcl/rw11util
|
|
- regmap.tcl - support for 'map of regdsc' definitions
|
|
|
- Changes
|
- Changes
|
- rtl/vlib/rlink
|
- rtl/vlib/rlink
|
- rlink_core - use 4th stat bit to signal rbus timeout
|
- rlink_core.vhd - add proc_sres: strip 'x' from RB_SRES.dout
|
- rtl/vlib/rbus
|
- rtl/vlib/rlink/tb
|
- rbd_rbmon - reorganized, supports now 16 bit addresses
|
- tbcore_rlink - drive SB_CNTL from start to avoid 'U'
|
- rtl/w11a
|
- rtl/w11a
|
- pdp11_core_rbus - use full size 4k word ibus window
|
- pdp11 - add defs for pdp11_dm(scnt|hbpt|cmon)
|
- tools/bin/tbw - add -fifo and -verbose options
|
- pdp11_* - add support for pdp11_dm(scnt|hbpt|cmon)
|
- tools/src/librtools
|
- rtl/sys_gen/w11a/*
|
- Rexception - add ctor from RerrMsg
|
- sys_conf - add sys_conf_(dmscnt|dmhbpt*|dmcmon*)
|
- tools/src/librlink
|
- rtl/sys_gen/w11a/*/tb
|
- RlinkCommandExpect - rblk/wblk done counts now expectable
|
- sys_conf_sim - add sys_conf_(dmscnt|dmhbpt*|dmcmon*)
|
- RlinkConnect - cleanups and minor enhancements
|
|
- RlinkServer - use attn notifies to dispatch handlers
|
|
- tools/src/librw11
|
|
- Rw11CntlRK11 - re-organize, use now Rw11RdmaDisk
|
|
- Rw11Cpu - add ibus address map
|
|
- tools/src/librwxxtpp
|
|
- RtclRw11CntlRK11 - add get/set for ChunkSize
|
|
- RtclRw11Cpu - add amap sub-command for ibus map access
|
|
|
|
- Resolved known issues from V0.62
|
|
- the rbus monitor (rbd_rbmon) has been updated to handle 16 bit addresses
|
|
|
|
- Known issues
|
|
- (V0.62): rlink v4 error recovery not yet implemented, will crash on error
|
|
- (V0.62): command lists aren't split to fit in retransmit buffer size
|
|
{both issues not relevant for w11 backend over USB usage because the
|
|
backend produces proper command lists and the USB channel is error free}
|
|
|
|
- trunk (2014-12-20: svn rev 27(oc) 614(wfjm); untagged w11a_V0.62) +++++++++
|
|
|
|
- Summary
|
|
- migrate to rlink protocol version 4
|
|
- Goals for rlink v4
|
|
- 16 bit addresses (instead of 8 bit)
|
|
- more robust encoding, support for error recovery at transport level
|
|
- add features to reduce round trips
|
|
- improved attention handling
|
|
- new 'list abort' command
|
|
- For further details see README_Rlink_V4.txt
|
|
- use own C++ based tcl shell tclshcpp instead of tclsh
|
|
|
|
Notes:
|
|
1. rlink protocol, core, and backend are updated in this release
|
|
2. error recovery in backend not yet implemented
|
|
3. the designs using rlink are still essentially unchanged
|
|
4. the new rlink v4 features will be exploited in upcoming releases
|
|
|
|
- New reference system
|
|
The development and test system was upgraded from Kubuntu 12.04 to 14.04.
|
|
The version of several key tools and libraries changed:
|
|
linux kernel 3.13.0 (was 3.2.0)
|
|
gcc/g++ 4.8.2 (was 4.6.3)
|
|
boost 1.54 (was 1.46.1)
|
|
libusb 1.0.17 (was 1.0.9)
|
|
perl 5.18.2 (was 5.14.2)
|
|
tcl 8.5.15 (was 8.5.11)
|
|
sdcc 3.3.0 (was 2.9.0)
|
|
doxygen 1.8.7 {installed from sources; Ub 14.04 has 1.8.6}
|
|
|
|
Notes:
|
|
1. still using tcl 8.5 (even though 8.6 is now default in Ub 14.04)
|
|
2. sdcc 3.x is not source compatible with sdcc 2.9. The Makefile
|
|
allows to use both, see tools/fx2/src/README.txt .
|
|
3. don't use doxygen 1.8.8, it fails to generate vhdl docs
|
|
|
|
- New features
|
|
- new environment variables TCLLIB and TCLLIBNAME. TCLLIBNAME must be
|
|
defined, and hold the library name matching the Tcl version already
|
|
specified with TCLINC.
|
|
- new modules
|
|
- rtl/vlib/comlib/crc16 - 16 bit crc generator (replaces crc8)
|
|
- tools/src/tclshcpp/* - new tclshcpp shell
|
|
|
|
- Changes
|
|
- rtl/vlib/comlib
|
|
- byte2cdata,cdata2byte - re-write, commas now 2 byte sequences
|
|
- rtl/vlib/rlink
|
|
- rlink_core - re-write for rlink v4
|
|
- rtl/*/* - use new rlink v4 iface and 4 bit STAT
|
|
- rtl/vlib/rbus/rbd* - new addresses in 16 bit rlink space
|
|
- rtl/vlib/simlib/simlib - add simfifo_*, wait_*, writetrace
|
|
- tools/bin/
|
- tools/bin/
|
- fx2load_wrapper - use _ic instead of _as as default firmware
|
- ti_w11 - add -ghw option
|
- ti_rri - use tclshcpp (C++ based) rather tclsh
|
- tmuconv - fix '.' handling for br/sob instructions
|
- tools/fx2/bin/*.ihx - recompiled with sdcc 3.3.0 + bugfixes
|
correct xor (now r,dst, and not src,r)
|
- tools/fx2/src/Makefile - support sdcc 3.3.0
|
- tools/tcl/rutil
|
- tools/src/
|
- regdsc.tcl - add regbldkv,reggetkv
|
- */*.cpp - adopt for rlink v4; use nullptr
|
- util.tcl - rename optlist2arr->args2opts, new logic
|
- librlink/RlinkCrc16 - 16 crc, replaces RlinkCrc8
|
- tools/tcl/rw11
|
- librlink/RlinkConnect - many changes for rlink v4
|
- asm.tcl - new arg list format in asm(run|treg|tmem)
|
- librlink/RlinkPacketBuf* - re-write for for rlink v4
|
- dasm.tcl - add dasm_inst2txt
|
- tools/tcl/*/*.tcl - adopt for rlink v4
|
- tools/tcl/ibd_ibmon
|
- renames:
|
- util.tcl - add symbolic register dump
|
- tools/bin/telnet_starter -> tools/bin/console_starter
|
|
|
|
- Bug fixes
|
- Bug fixes
|
- tools/fx2/src
|
- rtl/bplib/micron
|
- dscr_gen.A51 - correct string 0 descriptor
|
- mt45w8mw16b - fix issue when 1st access is to addr 0
|
- lib/syncdelay.h - handle triple nop now properly
|
- rtl/bplib/nxcramlib
|
|
- nx_cram_memctl_as - always define imem_oe in do_dispatch()
|
|
- rtl/ibus
|
|
- ibdr_tm11 - add missing BESET to sensitivity list
|
|
- rtl/w11a
|
|
- pdp11_sequencer - proper trap_mmu and trap_ysv handling
|
|
- tools/bin
|
|
- asm-11 - fix '.' handling in instructions
|
|
|
- Known issues
|
- Known issues
|
- rlink v4 error recovery not yet implemented, will crash on error
|
- all issues: see README_known_issues.txt
|
- command lists aren't split to fit in retransmit buffer size
|
|
{both issues not relevant for w11 backend over USB usage because the
|
|
backend produces proper command lists and the USB channel is error free}
|
|
- the rbus monitor (rbd_rbmon) not yet handling 16 bit addresses and
|
|
therefore of limited use
|
|
|
|
- trunk (2014-08-08: svn rev 25(oc) 579(wfjm); tagged w11a_V0.61) +++++++++++
|
|
|
|
- Summary
|
|
- The div instruction gave wrong results in some corner cases when either
|
|
divisor or quotient were the largest negative integer (100000 or -32768).
|
|
This is corrected now, for details see ECO-026-div.txt
|
|
- some minor updates and fixes to support scripts
|
|
- xtwi usage and XTWI_PATH setup explained in INSTALL.txt
|
|
|
|
- New features
|
|
- the Makefile's for in all rtl building block directories allow now to
|
|
configure the target board for a test synthesis via the XTW_BOARD
|
|
environment variable or XTW_BOARD= make option.
|
|
|
|
- Changes
|
- w11a_V0.7 (2015-06-21) +++++++++++++++++++++++++++++++++++++++++++++++++++++
|
- tools/bin/asm-11 - add call and return opcodes
|
cummulative summary of key changes from w11a_V0.6 to w11a_V0.7
|
- tools/bin/create_disk - add RM02,RM05,RP04,RP07 support
|
- Bugfix for DIV instruction (in w11a_V0.61, see ECO-026-div.txt)
|
- tools/bin/tbw - use xtwi to start ISim models
|
- revised rbus protocol V4 (in w11a_V0.62, see README_Rlink_V4.txt)
|
- tools/bin/ticonv_pdpcp - add --tout and --cmax; support .sdef
|
- add basic Vivado support (in w11a_V0.64)
|
- tools/dox/*.Doxyfile - use now doxygen 1.8.7
|
- add Nexys4 and Basys3 port of w11a (in w11a_V0.64)
|
- tools/src/librw11
|
- add RL11/RL02 disk support (in w11a_V0.64)
|
- Rw11CntlRK11 - add statistics
|
- add RH70+RP/RM disk support (in w11a_V0.65)
|
|
- add TM11/TY10 tape support (in w11a_V0.66)
|
|
- reference system now ISE 14.7, Vivado 2014.4; Ubuntu 14.04 64 bit, ghdl 0.31
|
|
|
- Bug fixes
|
for details see README-w11a_V.60-w11a_V0.70.txt
|
- rtl/w11a - div bug ECO-026
|
|
- pdp11_munit - port changes; fix divide logic
|
|
- pdp11_sequencer - s_opg_div_sr: check for late div_quit
|
|
- pdp11_dpath - port changes for pdp11_munit
|
|
- tools/bin/create_disk - repair --boot option (was inaccessible)
|
|
- tools/bin/ti_w11 - split args now into ti_w11 opts and cmds
|
|
- tools/src/librwxxtpp
|
|
- RtclRw11Cpu - redo estatdef logic; avoid LastExpect()
|
|
- tools/dox/make_doxy - create directories, fix 'to view use' text
|
|
|
|
- w11a_V0.6 (2014-06-06) +++++++++++++++++++++++++++++++++++++++++++++++++++++
|
- w11a_V0.6 (2014-06-06) +++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
cummulative summary of key changes from w11a_V0.5 to w11a_V0.60
|
cummulative summary of key changes from w11a_V0.5 to w11a_V0.6
|
- revised ibus protocol V2 (in w11a_V0.51)
|
- revised ibus protocol V2 (in w11a_V0.51)
|
- revised rbus protocol V3 (in w11a_V0.52)
|
- revised rbus protocol V3 (in w11a_V0.52)
|
- backend server rewritten in C++ and Tcl (in w11a_V0.53 and w11a_V0.562)
|
- backend server rewritten in C++ and Tcl (in w11a_V0.53 and w11a_V0.562)
|
- add Nexys3 port of w11a (in w11a_V0.54)
|
- add Nexys3 port of w11a (in w11a_V0.54)
|
- add Cypress FX2 support (in w11a_V0.56 and w11a_V0.57)
|
- add Cypress FX2 support (in w11a_V0.56 and w11a_V0.57)
|
- added LP11,PC11 support (in w11a_V0.58)
|
- added LP11,PC11 support (in w11a_V0.58)
|
- reference system now ISE 14.7 and Ubuntu 12.04 64 bit, ghdl 0.31
|
- reference system now ISE 14.7 and Ubuntu 12.04 64 bit, ghdl 0.31
|
- many code cleanups; use numeric_std
|
- many code cleanups; use numeric_std
|
- many documentation improvements
|
- many documentation improvements
|
- development status upgraded to beta (from alpha)
|
- development status upgraded to beta (from alpha)
|
|
|
for details see README-w11a_V.50-w11a_V0.60.txt
|
for details see README-w11a_V.50-w11a_V0.60.txt
|
|
|
- w11a_V0.5 (2010-07-23) +++++++++++++++++++++++++++++++++++++++++++++++++++++
|
- w11a_V0.5 (2010-07-23) +++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
Initial release with
|
Initial release with
|
- w11a CPU core
|
- w11a CPU core
|
- basic set of peripherals: kw11l, dl11, lp11, pc11, rk11/rk05
|
- basic set of peripherals: kw11l, dl11, lp11, pc11, rk11/rk05
|
- just for fun: iist (not fully implemented and tested yet)
|
- just for fun: iist (not fully implemented and tested yet)
|
- two complete system configurations with
|
- two complete system configurations with
|
- for a Digilent S3board rtl/sys_gen/w11a/s3board/sys_w11a_s3
|
- for a Digilent S3board rtl/sys_gen/w11a/s3board/sys_w11a_s3
|
- for a Digilent Nexys2 rtl/sys_gen/w11a/nexys2/sys_w11a_n2
|
- for a Digilent Nexys2 rtl/sys_gen/w11a/nexys2/sys_w11a_n2
|
|
|