///////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////
|
//
|
//
|
// Filename: busdelay.v
|
// Filename: busdelay.v
|
//
|
//
|
// Project: Zip CPU -- a small, lightweight, RISC CPU soft core
|
// Project: Zip CPU -- a small, lightweight, RISC CPU soft core
|
//
|
//
|
// Purpose: Delay any access to the wishbone bus by a single clock.
|
// Purpose: Delay any access to the wishbone bus by a single clock.
|
//
|
//
|
// When the first Zip System would not meet the timing requirements of
|
// When the first Zip System would not meet the timing requirements of
|
// the board it was placed upon, this bus delay was added to help out.
|
// the board it was placed upon, this bus delay was added to help out.
|
// It may no longer be necessary, having cleaned some other problems up
|
// It may no longer be necessary, having cleaned some other problems up
|
// first, but it will remain here as a means of alleviating timing
|
// first, but it will remain here as a means of alleviating timing
|
// problems.
|
// problems.
|
//
|
//
|
// The specific problem takes place on the stall line: a wishbone master
|
// The specific problem takes place on the stall line: a wishbone master
|
// *must* know on the first clock whether or not the bus will stall.
|
// *must* know on the first clock whether or not the bus will stall.
|
//
|
//
|
//
|
//
|
//
|
//
|
//
|
//
|
// Creator: Dan Gisselquist, Ph.D.
|
// Creator: Dan Gisselquist, Ph.D.
|
// Gisselquist Tecnology, LLC
|
// Gisselquist Tecnology, LLC
|
//
|
//
|
///////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////
|
//
|
//
|
// Copyright (C) 2015, Gisselquist Technology, LLC
|
// Copyright (C) 2015, Gisselquist Technology, LLC
|
//
|
//
|
// This program is free software (firmware): you can redistribute it and/or
|
// This program is free software (firmware): you can redistribute it and/or
|
// modify it under the terms of the GNU General Public License as published
|
// modify it under the terms of the GNU General Public License as published
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// your option) any later version.
|
// your option) any later version.
|
//
|
//
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// for more details.
|
// for more details.
|
//
|
//
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// http://www.gnu.org/licenses/gpl.html
|
// http://www.gnu.org/licenses/gpl.html
|
//
|
//
|
//
|
//
|
///////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////
|
//
|
//
|
module busdelay(i_clk,
|
module busdelay(i_clk,
|
// The input bus
|
// The input bus
|
i_wb_cyc, i_wb_stb, i_wb_we, i_wb_addr, i_wb_data,
|
i_wb_cyc, i_wb_stb, i_wb_we, i_wb_addr, i_wb_data,
|
o_wb_ack, o_wb_stall, o_wb_data,
|
o_wb_ack, o_wb_stall, o_wb_data, o_wb_err,
|
// The delayed bus
|
// The delayed bus
|
o_dly_cyc, o_dly_stb, o_dly_we, o_dly_addr, o_dly_data,
|
o_dly_cyc, o_dly_stb, o_dly_we, o_dly_addr, o_dly_data,
|
i_dly_ack, i_dly_stall, i_dly_data);
|
i_dly_ack, i_dly_stall, i_dly_data, i_dly_err);
|
parameter AW=32, DW=32;
|
parameter AW=32, DW=32;
|
input i_clk;
|
input i_clk;
|
// Input/master bus
|
// Input/master bus
|
input i_wb_cyc, i_wb_stb, i_wb_we;
|
input i_wb_cyc, i_wb_stb, i_wb_we;
|
input [(AW-1):0] i_wb_addr;
|
input [(AW-1):0] i_wb_addr;
|
input [(DW-1):0] i_wb_data;
|
input [(DW-1):0] i_wb_data;
|
output reg o_wb_ack;
|
output reg o_wb_ack;
|
output wire o_wb_stall;
|
output wire o_wb_stall;
|
output reg [(DW-1):0] o_wb_data;
|
output reg [(DW-1):0] o_wb_data;
|
|
output wire o_wb_err;
|
// Delayed bus
|
// Delayed bus
|
output reg o_dly_cyc, o_dly_stb, o_dly_we;
|
output reg o_dly_cyc, o_dly_stb, o_dly_we;
|
output reg [(AW-1):0] o_dly_addr;
|
output reg [(AW-1):0] o_dly_addr;
|
output reg [(DW-1):0] o_dly_data;
|
output reg [(DW-1):0] o_dly_data;
|
input i_dly_ack;
|
input i_dly_ack;
|
input i_dly_stall;
|
input i_dly_stall;
|
input [(DW-1):0] i_dly_data;
|
input [(DW-1):0] i_dly_data;
|
|
input i_dly_err;
|
|
|
initial o_dly_cyc = 1'b0;
|
initial o_dly_cyc = 1'b0;
|
initial o_dly_stb = 1'b0;
|
initial o_dly_stb = 1'b0;
|
|
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
o_dly_cyc <= i_wb_cyc;
|
o_dly_cyc <= i_wb_cyc;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (~o_wb_stall)
|
if (~o_wb_stall)
|
o_dly_stb <= i_wb_stb;
|
o_dly_stb <= i_wb_stb;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (~o_wb_stall)
|
if (~o_wb_stall)
|
o_dly_we <= i_wb_we;
|
o_dly_we <= i_wb_we;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (~o_wb_stall)
|
if (~o_wb_stall)
|
o_dly_addr<= i_wb_addr;
|
o_dly_addr<= i_wb_addr;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (~o_wb_stall)
|
if (~o_wb_stall)
|
o_dly_data <= i_wb_data;
|
o_dly_data <= i_wb_data;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
o_wb_ack <= (i_dly_ack)&&(o_dly_cyc)&&(i_wb_cyc);
|
o_wb_ack <= (i_dly_ack)&&(o_dly_cyc)&&(i_wb_cyc);
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
o_wb_data <= i_dly_data;
|
o_wb_data <= i_dly_data;
|
|
|
// Our only non-delayed line, yet still really delayed. Perhaps
|
// Our only non-delayed line, yet still really delayed. Perhaps
|
// there's a way to register this?
|
// there's a way to register this?
|
// o_wb_stall <= (i_wb_cyc)&&(i_wb_stb) ... or some such?
|
// o_wb_stall <= (i_wb_cyc)&&(i_wb_stb) ... or some such?
|
assign o_wb_stall = ((i_wb_cyc)&&(o_dly_cyc)&&(i_dly_stall)&&(o_dly_stb));
|
assign o_wb_stall = ((i_wb_cyc)&&(o_dly_cyc)&&(i_dly_stall)&&(o_dly_stb));
|
|
assign o_wb_err = i_dly_err;
|
|
|
endmodule
|
endmodule
|
|
|
