URL https://opencores.org/ocsvn/cpu8080/cpu8080/trunk

Subversion Repositories cpu8080

[/] [cpu8080/] [trunk/] [project/] [testbench.xst] - Diff between revs 24 and 28

Rev 24	Rev 28
Line 1...	Line 1...
`set -tmpdir "./xst/projnav.tmp"`	`set -tmpdir "./xst/projnav.tmp"`
`elaborate`	`set -xsthdpdir "./xst"`
	`run`
`-ifn testbench.prj`	`-ifn testbench.prj`
`-ifmt mixed`	`-ifmt mixed`
	`-ofn testbench`
	`-ofmt NGC`
	`-p xc3s1000-4-ft256`
	`-top testbench`
	`-opt_mode Speed`
	`-opt_level 1`
	`-iuc NO`
	`-lso testbench.lso`
	`-keep_hierarchy NO`
	`-rtlview Yes`
	`-glob_opt AllClockNets`
	`-read_cores YES`
	`-write_timing_constraints NO`
	`-cross_clock_analysis NO`
	`-hierarchy_separator /`
	`-bus_delimiter <>`
	`-case maintain`
	`-slice_utilization_ratio 100`
	`-verilog2001 YES`
	`-fsm_extract YES -fsm_encoding Auto`
	`-safe_implementation No`
	`-fsm_style lut`
	`-ram_extract Yes`
	`-ram_style Auto`
	`-rom_extract Yes`
	`-mux_style Auto`
	`-decoder_extract YES`
	`-priority_extract YES`
	`-shreg_extract YES`
	`-shift_extract YES`
	`-xor_collapse YES`
	`-rom_style Auto`
	`-mux_extract YES`
	`-resource_sharing YES`
	`-mult_style auto`
	`-iobuf YES`
	`-max_fanout 500`
	`-bufg 8`
	`-register_duplication YES`
	`-register_balancing No`
	`-slice_packing YES`
	`-optimize_primitives NO`
	`-use_clock_enable Yes`
	`-use_sync_set Yes`
	`-use_sync_reset Yes`
	`-iob auto`
	`-equivalent_register_removal YES`
	`-slice_utilization_ratio_maxmargin 5`