| Line 1... |
Line 1... |
|
|
|
|
#daemon configuration
|
#daemon configuration
|
telnet_port 4444
|
telnet_port 4444
|
gdb_port 3333
|
gdb_port 3333
|
|
|
|
|
#interface
|
#interface
|
interface ft2232
|
interface ft2232
|
ft2232_device_desc "Olimex OpenOCD JTAG A"
|
ft2232_device_desc "Olimex OpenOCD JTAG A"
|
ft2232_layout "olimex-jtag"
|
ft2232_layout olimex-jtag
|
ft2232_vid_pid 0x15BA 0x0003
|
ft2232_vid_pid 0x15ba 0x0003
|
jtag_khz 1000
|
jtag_khz 850
|
|
|
|
|
if { [info exists CHIPNAME] } {
|
if { [info exists CHIPNAME] } {
|
set _CHIPNAME $CHIPNAME
|
set _CHIPNAME $CHIPNAME
|
} else {
|
} else {
|
set _CHIPNAME lpc2294
|
set _CHIPNAME lpc2294
|
| Line 28... |
Line 30... |
} else {
|
} else {
|
# force an error till we get a good number
|
# force an error till we get a good number
|
set _CPUTAPID 0xffffffff
|
set _CPUTAPID 0xffffffff
|
}
|
}
|
|
|
|
jtag_nsrst_delay 200
|
|
jtag_ntrst_delay 200
|
|
|
#use combined on interfaces or targets that can't set TRST/SRST separately
|
#use combined on interfaces or targets that can't set TRST/SRST separately
|
jtag_nsrst_delay 25
|
reset_config trst_and_srst srst_pulls_trst
|
jtag_ntrst_delay 25
|
|
|
|
reset_config trst_and_srst separate
|
|
# reset_config trst_only
|
|
|
|
|
|
#jtag scan chain
|
#jtag scan chain
|
# jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
# jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f
|
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f
|
|
|
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
|
set _TARGETNAME $_CHIPNAME.cpu
|
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
|
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
|
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
|
$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
|
|
|
#flash configuration
|
#flash configuration
|
#flash bank lpc2000 0 0
|
#flash bank lpc2000 0 0
|
flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum
|
# flash bank cfi 0x81000000 0x100000 2 2 0
|
|
|
|
|
|
# For more information about the configuration files, take a look at:
|
# For more information about the configuration files, take a look at:
|
# openocd.texi
|
# openocd.texi
|
|
|
