OpenCores
URL https://opencores.org/ocsvn/eco32/eco32/trunk

Subversion Repositories eco32

[/] [eco32/] [trunk/] [fpga/] [mc/] [src/] [dsp/] [bpp9/] [dsp.v] - Diff between revs 27 and 123

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 27 Rev 123
Line 1... Line 1...
 
//
 
// dsp.v -- character display interface
 
//
 
 
 
 
module dsp(clk, reset,
module dsp(clk, reset,
           addr, en, wr, wt,
           addr, en, wr, wt,
           data_in, data_out,
           data_in, data_out,
           hsync, vsync,
           hsync, vsync,
           r, g, b);
           r, g, b);
 
    // internal interface
    input clk;
    input clk;
    input reset;
    input reset;
    input [13:2] addr;
    input [13:2] addr;
    input en;
    input en;
    input wr;
    input wr;
    output wt;
    output wt;
    input [15:0] data_in;
    input [15:0] data_in;
    output [15:0] data_out;
    output [15:0] data_out;
 
    // external interface
    output hsync;
    output hsync;
    output vsync;
    output vsync;
    output [2:0] r;
    output [2:0] r;
    output [2:0] g;
    output [2:0] g;
    output [2:0] b;
    output [2:0] b;
 
 
  reg state;
  reg state;
 
 
  display display1 (.clk(clk),
  display display1(
 
    .clk(clk),
                    .dsp_row(addr[13:9]),
                    .dsp_row(addr[13:9]),
                    .dsp_col(addr[8:2]),
                    .dsp_col(addr[8:2]),
                    .dsp_en(en),
                    .dsp_en(en),
                    .dsp_wr(wr),
                    .dsp_wr(wr),
                    .dsp_wr_data(data_in[15:0]),
                    .dsp_wr_data(data_in[15:0]),
                    .dsp_rd_data(data_out[15:0]),
                    .dsp_rd_data(data_out[15:0]),
                    .hsync(hsync),
                    .hsync(hsync),
                    .vsync(vsync),
                    .vsync(vsync),
                    .r(r[2:0]),
                    .r(r[2:0]),
                    .g(g[2:0]),
                    .g(g[2:0]),
                    .b(b[2:0]));
    .b(b[2:0])
 
  );
 
 
  always @(posedge clk) begin
  always @(posedge clk) begin
    if (reset == 1) begin
    if (reset == 1) begin
      state <= 1'b0;
      state <= 1'b0;
    end else begin
    end else begin

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.