URL https://opencores.org/ocsvn/fade_ether_protocol/fade_ether_protocol/trunk

Subversion Repositories fade_ether_protocol

[/] [fade_ether_protocol/] [trunk/] [desc.txt] - Diff between revs 2 and 3

Rev 2	Rev 3
Line 119...	Line 119...
`I had to include the generated dcm1.vhd file to avoid binary`	`I had to include the generated dcm1.vhd file to avoid binary`
`attachment in shar archive).`	`attachment in shar archive).`
`I hope that you'll be able to rebuild my design with them`	`I hope that you'll be able to rebuild my design with them`

`REBUILDING of FPGA CORES`	`REBUILDING of FPGA CORES`
	`The sources are split into two sections:`
	`FPGA_with_MAC - this is the older version with Ethernet MAC taken from`
	`http://opencores.org/project,ethernet_tri_mode`
	`FPGA_no_MAC - this is the newer version with renoved Ethernet MAC`
	`instead two small state machines are implemented in`
	`ethernet_sender_X and ethernet_receiver_X (X=4 or 8)`
	`controlling the PHY directly.`

`My sources have been tested with three boards: SP601, Atlys and`	`My sources have been tested with three boards: SP601, Atlys and`
`Spartan-3E Starter Kit. In the FPGA subdirectory there are`	`Spartan-3E Starter Kit. In the FPGA subdirectory there are`
`three subdirectories: sp601, atlys and sk3e. In each of those`	`three subdirectories: sp601, atlys and sk3e. In each of those`
`subdirectories you there is the "build.sh" script, which`	`subdirectories you there is the "build.sh" script, which`
`should recreate the .bit file needed to configure particular`	`should recreate the .bit file needed to configure particular`