URL https://opencores.org/ocsvn/gecko3/gecko3/trunk

Subversion Repositories gecko3

[/] [gecko3/] [trunk/] [GECKO3COM/] [gecko3com-fw/] [firmware/] [src/] [spi_flash.c] - Diff between revs 35 and 36

Rev 35	Rev 36
Line 77...	Line 77...
`bitSPI_CLK = 0; //make shure spi_clk is low before we activate a device`	`bitSPI_CLK = 0; //make shure spi_clk is low before we activate a device`
`SPI_OE \|= bmSPI_OE_MASK; //activate spi bus`	`SPI_OE \|= bmSPI_OE_MASK; //activate spi bus`
`enables &= bmSPI_CS_MASK;`	`enables &= bmSPI_CS_MASK;`
`SPI_CS_PORT \|= bmSPI_CS_MASK; //disable all chipselect signals`	`SPI_CS_PORT \|= bmSPI_CS_MASK; //disable all chipselect signals`
`SPI_CS_PORT &= ~enables;`	`SPI_CS_PORT &= ~enables;`
`SPI_CS_OE \|= enables;`	`//SPI_CS_OE \|= enables;`
`SPI_CS_OE \|= bmSPI_CS_MASK;`	`SPI_CS_OE \|= bmSPI_CS_MASK;`
`}`	`}`
`}`	`}`

`// setup_enables (0); SPI_CS_PORT \|= bmSPI_CS_MASK; \ \`	`// setup_enables (0); SPI_CS_PORT \|= bmSPI_CS_MASK; \ \`
`/** disables all SPI devices and sets the SPI and SPI CS signals to tri-state */`	`/** disables all SPI devices and sets the SPI and SPI CS signals to tri-state */`
	`/*#define disable_all() { \`
	`setup_enables (0); \`
	`SPI_CS_OE &= ~bmSPI_CS_MASK; \`
	`SPI_OE &= ~bmSPI_OE_MASK; \`
	`}*/`

`#define disable_all() { \`	`#define disable_all() { \`
`setup_enables (0); \`	`SPI_CS_PORT \|= bmSPI_CS_MASK; \`
`SPI_CS_OE &= ~bmSPI_CS_MASK; \`	`SPI_CS_OE &= ~bmSPI_CS_MASK; \`
`SPI_OE &= ~bmSPI_OE_MASK; \`	`SPI_OE &= ~bmSPI_OE_MASK; \`
`}`	`}`


`/** \brief Internal: Writes one byte to the SPI bus`	`/** \brief Internal: Writes one byte to the SPI bus`
`*`	`*`
`* \param[in] data to write to the bus`	`* \param[in] data to write to the bus`
`*/`	`*/`
`static void`	`static void`