URL https://opencores.org/ocsvn/light8080/light8080/trunk

Subversion Repositories light8080

[/] [light8080/] [trunk/] [c/] [hello.asm] - Diff between revs 66 and 67

Rev 66	Rev 67
Line 776...	Line 776...
`;main()`	`;main()`
`__main:`	`__main:`
`;{`	`;{`
`; // configure UART baud rate - set to 9600 for 30MHz clock`	`; // configure UART baud rate - set to 9600 for 30MHz clock`
`; // BAUD = round(//16) = round(30e6/9600/16) = 195`	`; // BAUD = round(//16) = round(30e6/9600/16) = 195`
`;//MOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTI`	`; // Note: Usage of a minimum divider value of 1 will accelerate the RTL simulation.`
`;//MOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTI`	`; UBAUDL = 195;`
`;// UBAUDL = 195;`	`ld hl,195`
`; UBAUDL = 1;`
`ld hl,1`
`ld a,l`	`ld a,l`
`out (129),a`	`out (129),a`

`;//MOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTI`
`;//MOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTIMOTI`
`; UBAUDH = 0;`	`; UBAUDH = 0;`
`ld hl,0`	`ld hl,0`
`ld a,l`	`ld a,l`
`out (130),a`	`out (130),a`

Line 821...	Line 817...
`out (136),a`	`out (136),a`

`; // enable CPU interrupt`	`; // enable CPU interrupt`
`;#asm`	`;#asm`
`ei`	`ei`
`;`
`; // print message`	`; // print message`
`; printstr("Hello World!!!"); nl();`	`; printstr("Hello World!!!"); nl();`
`ld hl,cc1+26`	`ld hl,cc1+26`
`push hl`	`push hl`
`call __printstr`	`call __printstr`