Subversion Repositories nemo_emotion

# MIPL Mobile IPv6 Configuration file

# Should this node act as a home agent (ha), mobile node (mn) or

# correspondent node (cn). HA and MN both have CN functionality

# embedded. Default: cn.

FUNCTIONALITY=mn

# Should this mobile node act as a mobile node (no) or a mobile

# router (yes). The mobile router implements the NEMO Basic Support

# protocol. Default: no.

MR=yes

# Should this home agent act as a Mobile IPv6 home agent (no) or a

# NEMO home agent (yes) implementing the NEMO Basic Support protocol.

# Default: no.

# NEMO_HA_CAPABLE=no

# In error situations it may be desired to get more detailed

# information what is happening. Increase this value to get more

# messages from the module (default: 0).

DEBUGLEVEL=7

# Should unicasts to node's site-local address be tunneled when mobile

# node is not in its home network (default: no).

TUNNEL_SITELOCAL=yes

# Minimum number of free tunnel devices kept in cache on MN or HA

# Must be set to at least 1 for MN and HA. To ensure successful

# bindings even during high work loads it could be set to a bigger

# value on the HA.

MIN_TUNNEL_NR=1

# Maximum number of free tunnel devices kept in cache on MN or HA

# Must be set to at least 1 for MN and HA. To improve performance

# set it higher than MIN_TUNNEL_NR

MAX_TUNNEL_NR=3

# Device where home address should be assigned to

HOMEDEV=mip6mnha1

# Home address for mobile node with prefix length. Example:

# 3FFE:2620:6:1234:ABCD::1/128 (Don't use the example value!)

HOMEADDRESS=fec0:106:2700::4/64

# Home agent's address for mobile node with prefix length. Set to

# 0::0/64 for dynamic home agent address

HOMEAGENT=fec0:106:2700::2/64