URL https://opencores.org/ocsvn/neorv32/neorv32/trunk

Subversion Repositories neorv32

[/] [neorv32/] [trunk/] [docs/] [userguide/] [debugging_with_ocd.adoc] - Diff between revs 72 and 74

Rev 72	Rev 74
Line 173...	Line 173...

`After the upload, GDB will make the processor jump to the beginning of the uploaded executable`	`After the upload, GDB will make the processor jump to the beginning of the uploaded executable`
(by default, this is the beginning of the instruction memory at `0x00000000`) skipping the bootloader	(by default, this is the beginning of the instruction memory at `0x00000000`) skipping the bootloader
and halting the CPU right before executing the `blink_led` application.	and halting the CPU right before executing the `blink_led` application.

	`[IMPORTANT]`
	`After gdb has connected to the CPU, it is recommended to disable the CPU's global interrupt flag`
	(`mstatus.mie`, = bit #3) to prevent unintended calls of potentially outdated trap handlers. The global
	`interrupt flag can be cleared using the following gdb command:`
	`set $mstatus = ($mstatus & ~(1<<3))`. Interrupts can be enabled globally again by the following command:
	`set $mstatus = ($mstatus \| (1<<3))`.


`:sectnums:`	`:sectnums:`
`==== Software Breakpoints`	`==== Software Breakpoints`

`The following steps are just a small showcase that illustrate a simple debugging scheme.`	`The following steps are just a small showcase that illustrate a simple debugging scheme.`