| Line 34... |
Line 34... |
//
|
//
|
// *Author(s):
|
// *Author(s):
|
// - Olivier Girard, olgirard@gmail.com
|
// - Olivier Girard, olgirard@gmail.com
|
//
|
//
|
//----------------------------------------------------------------------------
|
//----------------------------------------------------------------------------
|
// $Rev: 202 $
|
// $Rev: 205 $
|
// $LastChangedBy: olivier.girard $
|
// $LastChangedBy: olivier.girard $
|
// $LastChangedDate: 2015-07-01 23:13:32 +0200 (Wed, 01 Jul 2015) $
|
// $LastChangedDate: 2015-07-15 22:59:52 +0200 (Wed, 15 Jul 2015) $
|
//----------------------------------------------------------------------------
|
//----------------------------------------------------------------------------
|
`ifdef OMSP_NO_INCLUDE
|
`ifdef OMSP_NO_INCLUDE
|
`else
|
`else
|
`include "openMSP430_defines.v"
|
`include "openMSP430_defines.v"
|
`endif
|
`endif
|
| Line 159... |
Line 159... |
parameter [DEC_SZ-1:0] BCSCTL1_D = (BASE_REG << BCSCTL1),
|
parameter [DEC_SZ-1:0] BCSCTL1_D = (BASE_REG << BCSCTL1),
|
BCSCTL2_D = (BASE_REG << BCSCTL2);
|
BCSCTL2_D = (BASE_REG << BCSCTL2);
|
|
|
// Local wire declarations
|
// Local wire declarations
|
wire nodiv_mclk;
|
wire nodiv_mclk;
|
wire nodiv_mclk_n;
|
|
wire nodiv_smclk;
|
wire nodiv_smclk;
|
|
|
|
|
//============================================================================
|
//============================================================================
|
// 2) REGISTER DECODER
|
// 2) REGISTER DECODER
|
| Line 416... |
Line 415... |
omsp_and_gate and_dco_dis4 (.y(dco_disable_by_cpu_en), .a(~cpu_en_s), .b(~mclk_enable));
|
omsp_and_gate and_dco_dis4 (.y(dco_disable_by_cpu_en), .a(~cpu_en_s), .b(~mclk_enable));
|
omsp_and_gate and_dco_dis5 (.y(dco_enable_nxt), .a(~dco_disable_by_scg0), .b(~dco_disable_by_cpu_en));
|
omsp_and_gate and_dco_dis5 (.y(dco_enable_nxt), .a(~dco_disable_by_scg0), .b(~dco_disable_by_cpu_en));
|
|
|
// Register to prevent glitch propagation
|
// Register to prevent glitch propagation
|
reg dco_disable;
|
reg dco_disable;
|
always @(posedge nodiv_mclk_n or posedge por)
|
wire dco_wkup_set_scan_observe;
|
|
always @(posedge nodiv_mclk or posedge por)
|
if (por) dco_disable <= 1'b1;
|
if (por) dco_disable <= 1'b1;
|
else dco_disable <= ~dco_enable_nxt;
|
else dco_disable <= ~dco_enable_nxt | dco_wkup_set_scan_observe;
|
|
|
|
// Optional scan repair
|
|
wire dco_clk_n;
|
|
`ifdef SCAN_REPAIR_INV_CLOCKS
|
|
omsp_scan_mux scan_mux_repair_dco_clk_n (
|
|
.scan_mode (scan_mode),
|
|
.data_in_scan ( dco_clk),
|
|
.data_in_func (~dco_clk),
|
|
.data_out ( dco_clk_n)
|
|
);
|
|
`else
|
|
assign dco_clk_n = ~dco_clk;
|
|
`endif
|
|
|
// Note that a synchronizer is required if the MCLK mux is included
|
// Note that a synchronizer is required if the MCLK mux is included
|
wire dco_clk_n = ~dco_clk;
|
|
`ifdef MCLK_MUX
|
`ifdef MCLK_MUX
|
omsp_sync_cell sync_cell_dco_disable (
|
omsp_sync_cell sync_cell_dco_disable (
|
.data_out (dco_enable),
|
.data_out (dco_enable),
|
.data_in (~dco_disable),
|
.data_in (~dco_disable),
|
.clk (dco_clk_n),
|
.clk (dco_clk_n),
|
.rst (por)
|
.rst (por)
|
);
|
);
|
`else
|
`else
|
assign dco_enable = ~dco_disable;
|
// Optional scan repair
|
|
wire nodiv_mclk_n;
|
|
`ifdef SCAN_REPAIR_INV_CLOCKS
|
|
omsp_scan_mux scan_mux_repair_nodiv_mclk_n (
|
|
.scan_mode (scan_mode),
|
|
.data_in_scan ( nodiv_mclk),
|
|
.data_in_func (~nodiv_mclk),
|
|
.data_out ( nodiv_mclk_n)
|
|
);
|
|
`else
|
|
assign nodiv_mclk_n = ~nodiv_mclk;
|
|
`endif
|
|
|
|
// Re-time DCO enable with MCLK falling edge
|
|
reg dco_enable;
|
|
always @(posedge nodiv_mclk_n or posedge por)
|
|
if (por) dco_enable <= 1'b0;
|
|
else dco_enable <= ~dco_disable;
|
`endif
|
`endif
|
|
|
// The DCO oscillator will get an asynchronous wakeup if:
|
// The DCO oscillator will get an asynchronous wakeup if:
|
// - the MCLK generates a wakeup (only if the MCLK mux selects dco_clk)
|
// - the MCLK generates a wakeup (only if the MCLK mux selects dco_clk)
|
// - if the DCO wants to be synchronously enabled (i.e dco_enable_nxt=1)
|
// - if the DCO wants to be synchronously enabled (i.e dco_enable_nxt=1)
|
| Line 453... |
Line 482... |
.data_in_func (dco_wkup_set | por),
|
.data_in_func (dco_wkup_set | por),
|
.data_out (dco_wkup_set_scan)
|
.data_out (dco_wkup_set_scan)
|
);
|
);
|
|
|
// Scan MUX to increase coverage
|
// Scan MUX to increase coverage
|
wire dco_wkup_clear;
|
omsp_scan_mux scan_mux_dco_wkup_observe (
|
omsp_scan_mux scan_mux_dco_wkup_clear (
|
|
.scan_mode (scan_mode),
|
.scan_mode (scan_mode),
|
.data_in_scan (dco_wkup_set),
|
.data_in_scan (dco_wkup_set),
|
.data_in_func (1'b1),
|
.data_in_func (1'b0),
|
.data_out (dco_wkup_clear)
|
.data_out (dco_wkup_set_scan_observe)
|
);
|
);
|
|
|
// The wakeup is asynchronously set, synchronously released
|
// The wakeup is asynchronously set, synchronously released
|
wire dco_wkup_n;
|
wire dco_wkup_n;
|
omsp_sync_cell sync_cell_dco_wkup (
|
omsp_sync_cell sync_cell_dco_wkup (
|
.data_out (dco_wkup_n),
|
.data_out (dco_wkup_n),
|
.data_in (dco_wkup_clear),
|
.data_in (1'b1),
|
.clk (dco_clk_n),
|
.clk (dco_clk_n),
|
.rst (dco_wkup_set_scan)
|
.rst (dco_wkup_set_scan)
|
);
|
);
|
|
|
omsp_and_gate and_dco_wkup (.y(dco_wkup), .a(~dco_wkup_n), .b(cpu_en));
|
omsp_and_gate and_dco_wkup (.y(dco_wkup), .a(~dco_wkup_n), .b(cpu_en));
|
| Line 510... |
Line 538... |
omsp_and_gate and_lfxt_dis4 (.y(lfxt_disable_by_cpu_en), .a(~cpu_en_s), .b(~mclk_enable));
|
omsp_and_gate and_lfxt_dis4 (.y(lfxt_disable_by_cpu_en), .a(~cpu_en_s), .b(~mclk_enable));
|
omsp_and_gate and_lfxt_dis5 (.y(lfxt_enable_nxt), .a(~lfxt_disable_by_oscoff), .b(~lfxt_disable_by_cpu_en));
|
omsp_and_gate and_lfxt_dis5 (.y(lfxt_enable_nxt), .a(~lfxt_disable_by_oscoff), .b(~lfxt_disable_by_cpu_en));
|
|
|
// Register to prevent glitch propagation
|
// Register to prevent glitch propagation
|
reg lfxt_disable;
|
reg lfxt_disable;
|
always @(posedge nodiv_mclk_n or posedge por)
|
wire lfxt_wkup_set_scan_observe;
|
|
always @(posedge nodiv_mclk or posedge por)
|
if (por) lfxt_disable <= 1'b1;
|
if (por) lfxt_disable <= 1'b1;
|
else lfxt_disable <= ~lfxt_enable_nxt;
|
else lfxt_disable <= ~lfxt_enable_nxt | lfxt_wkup_set_scan_observe;
|
|
|
|
// Optional scan repair
|
|
wire lfxt_clk_n;
|
|
`ifdef SCAN_REPAIR_INV_CLOCKS
|
|
omsp_scan_mux scan_mux_repair_lfxt_clk_n (
|
|
.scan_mode (scan_mode),
|
|
.data_in_scan ( lfxt_clk),
|
|
.data_in_func (~lfxt_clk),
|
|
.data_out ( lfxt_clk_n)
|
|
);
|
|
`else
|
|
assign lfxt_clk_n = ~lfxt_clk;
|
|
`endif
|
|
|
// Synchronize the OSCOFF control signal to the LFXT clock domain
|
// Synchronize the OSCOFF control signal to the LFXT clock domain
|
wire lfxt_clk_n = ~lfxt_clk;
|
|
omsp_sync_cell sync_cell_lfxt_disable (
|
omsp_sync_cell sync_cell_lfxt_disable (
|
.data_out (lfxt_enable),
|
.data_out (lfxt_enable),
|
.data_in (~lfxt_disable),
|
.data_in (~lfxt_disable),
|
.clk (lfxt_clk_n),
|
.clk (lfxt_clk_n),
|
.rst (por)
|
.rst (por)
|
| Line 543... |
Line 584... |
.data_in_func (lfxt_wkup_set | por),
|
.data_in_func (lfxt_wkup_set | por),
|
.data_out (lfxt_wkup_set_scan)
|
.data_out (lfxt_wkup_set_scan)
|
);
|
);
|
|
|
// Scan MUX to increase coverage
|
// Scan MUX to increase coverage
|
wire lfxt_wkup_clear;
|
omsp_scan_mux scan_mux_lfxt_wkup_observe (
|
omsp_scan_mux scan_mux_lfxt_wkup_clear (
|
|
.scan_mode (scan_mode),
|
.scan_mode (scan_mode),
|
.data_in_scan (lfxt_wkup_set),
|
.data_in_scan (lfxt_wkup_set),
|
.data_in_func (1'b1),
|
.data_in_func (1'b0),
|
.data_out (lfxt_wkup_clear)
|
.data_out (lfxt_wkup_set_scan_observe)
|
);
|
);
|
|
|
// The wakeup is asynchronously set, synchronously released
|
// The wakeup is asynchronously set, synchronously released
|
wire lfxt_wkup_n;
|
wire lfxt_wkup_n;
|
omsp_sync_cell sync_cell_lfxt_wkup (
|
omsp_sync_cell sync_cell_lfxt_wkup (
|
.data_out (lfxt_wkup_n),
|
.data_out (lfxt_wkup_n),
|
.data_in (lfxt_wkup_clear),
|
.data_in (1'b1),
|
.clk (lfxt_clk_n),
|
.clk (lfxt_clk_n),
|
.rst (lfxt_wkup_set_scan)
|
.rst (lfxt_wkup_set_scan)
|
);
|
);
|
|
|
omsp_and_gate and_lfxt_wkup (.y(lfxt_wkup), .a(~lfxt_wkup_n), .b(cpu_en));
|
omsp_and_gate and_lfxt_wkup (.y(lfxt_wkup), .a(~lfxt_wkup_n), .b(cpu_en));
|
| Line 675... |
Line 715... |
.select_in (bcsctl2[`SELMx])
|
.select_in (bcsctl2[`SELMx])
|
);
|
);
|
`else
|
`else
|
assign nodiv_mclk = dco_clk;
|
assign nodiv_mclk = dco_clk;
|
`endif
|
`endif
|
assign nodiv_mclk_n = ~nodiv_mclk;
|
|
|
|
|
|
// Wakeup synchronizer
|
// Wakeup synchronizer
|
//----------------------------
|
//----------------------------
|
wire cpuoff_and_mclk_dma_wkup_s;
|
wire cpuoff_and_mclk_dma_wkup_s;
|
