| Line 1... |
Line 1... |
|
/*===========================================================================*/
|
|
/* Copyright (C) 2001 Authors */
|
|
/* */
|
|
/* This source file may be used and distributed without restriction provided */
|
|
/* that this copyright statement is not removed from the file and that any */
|
|
/* derivative work contains the original copyright notice and the associated */
|
|
/* disclaimer. */
|
|
/* */
|
|
/* This source file is free software; you can redistribute it and/or modify */
|
|
/* it under the terms of the GNU Lesser General Public License as published */
|
|
/* by the Free Software Foundation; either version 2.1 of the License, or */
|
|
/* (at your option) any later version. */
|
|
/* */
|
|
/* This source is distributed in the hope that it will be useful, but WITHOUT*/
|
|
/* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or */
|
|
/* FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public */
|
|
/* License for more details. */
|
|
/* */
|
|
/* You should have received a copy of the GNU Lesser General Public License */
|
|
/* along with this source; if not, write to the Free Software Foundation, */
|
|
/* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
|
|
/* */
|
|
/*===========================================================================*/
|
|
/* DEBUG INTERFACE */
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Test the debug interface: */
|
|
/* - Check Hardware breakpoint unit 2. */
|
|
/* */
|
|
/* Author(s): */
|
|
/* - Olivier Girard, olgirard@gmail.com */
|
|
/* */
|
|
/*---------------------------------------------------------------------------*/
|
|
/* $Rev: 154 $ */
|
|
/* $LastChangedBy: olivier.girard $ */
|
|
/* $LastChangedDate: 2012-10-15 22:44:20 +0200 (Mon, 15 Oct 2012) $ */
|
|
/*===========================================================================*/
|
|
|
|
`define LONG_TIMEOUT
|
|
|
|
initial
|
|
begin
|
|
$display(" ===============================================");
|
|
$display("| START SIMULATION |");
|
|
$display(" ===============================================");
|
|
`ifdef DBG_EN
|
|
`ifdef DBG_UART
|
|
`ifdef DBG_HWBRK_2
|
|
#1 dbg_en = 1;
|
|
repeat(30) @(posedge mclk);
|
|
stimulus_done = 0;
|
|
|
|
// SEND UART SYNCHRONIZATION FRAME
|
|
dbg_uart_tx(DBG_SYNC);
|
|
|
|
`ifdef DBG_RST_BRK_EN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002); // RUN
|
|
`endif
|
|
|
|
|
|
// HARDWARE BREAKPOINTS: INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES
|
|
//----------------------------------------------------------------------
|
|
|
|
// RESET & BREAK
|
|
dbg_uart_wr(CPU_CTL, 16'h0060);
|
|
dbg_uart_wr(CPU_CTL, 16'h0020);
|
|
|
|
// CONFIGURE BREAKPOINT (DISABLED) & RUN
|
|
dbg_uart_wr(BRK2_ADDR0, ('h10000-`PMEM_SIZE+'h04));
|
|
dbg_uart_wr(BRK2_ADDR1, ('h10000-`PMEM_SIZE+'h18));
|
|
dbg_uart_wr(BRK2_CTL, 16'h000C);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RESET & BREAK
|
|
dbg_uart_wr(CPU_CTL, 16'h0060);
|
|
dbg_uart_wr(CPU_CTL, 16'h0020);
|
|
dbg_uart_wr(CPU_STAT, 16'h00ff);
|
|
|
|
// CHECK
|
|
if (mem200 === 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 1 =====");
|
|
|
|
// CONFIGURE BREAKPOINT (ENABLED) & RUN
|
|
dbg_uart_wr(BRK2_ADDR0, ('h10000-`PMEM_SIZE+'h04));
|
|
dbg_uart_wr(BRK2_ADDR1, ('h10000-`PMEM_SIZE+'h18));
|
|
dbg_uart_wr(BRK2_CTL, 16'h000D);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h04)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 2 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 3 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 4 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 5 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0001);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 6 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(BRK2_ADDR0, 16'h0000);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h18)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 7 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 8 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 9 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0004) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 10 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0004);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES: test 11 =====");
|
|
|
|
|
|
|
|
// HARDWARE BREAKPOINTS: INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE
|
|
//----------------------------------------------------------------------
|
|
if (`HWBRK_RANGE)
|
|
begin
|
|
|
|
// RESET, BREAK & CLEAR STATUS
|
|
dbg_uart_wr(CPU_CTL, 16'h0060);
|
|
dbg_uart_wr(CPU_CTL, 16'h0020);
|
|
dbg_uart_wr(BRK2_STAT, 16'h00ff);
|
|
dbg_uart_wr(CPU_STAT, 16'h00ff);
|
|
|
|
// CONFIGURE BREAKPOINT(ENABLED) & RUN
|
|
dbg_uart_wr(BRK2_ADDR0, ('h10000-`PMEM_SIZE-'h100));
|
|
dbg_uart_wr(BRK2_ADDR1, ('h10000-`PMEM_SIZE+'h20));
|
|
dbg_uart_wr(BRK2_CTL, 16'h001D);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE: test 1 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE: test 2 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE: test 3 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0010) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE: test 4 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0010);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE: test 5 =====");
|
|
end
|
|
|
|
|
|
// HARDWARE BREAKPOINTS: DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ
|
|
//----------------------------------------------------------------------------
|
|
|
|
// RESET, BREAK & CLEAR STATUS
|
|
dbg_uart_wr(CPU_CTL, 16'h0060);
|
|
dbg_uart_wr(CPU_CTL, 16'h0020);
|
|
dbg_uart_wr(BRK2_STAT, 16'h00ff);
|
|
dbg_uart_wr(CPU_STAT, 16'h00ff);
|
|
|
|
|
|
// CONFIGURE BREAKPOINT (ENABLED) & RUN
|
|
dbg_uart_wr(BRK2_ADDR0, (`PER_SIZE+16'h0004));
|
|
dbg_uart_wr(BRK2_ADDR1, (`PER_SIZE+16'h0008));
|
|
dbg_uart_wr(BRK2_CTL, 16'h0005);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h18)) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 1 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 2 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 3 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 4 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0001);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 5 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h1C)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ: test 6 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ: test 7 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ: test 8 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0004) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ: test 9 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0004);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ: test 10 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h18)) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 11 =====");
|
|
if (mem200 !== 16'h0002) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 12 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 13 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 14 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0001);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ: test 15 =====");
|
|
|
|
|
|
// HARDWARE BREAKPOINTS: DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - WRITE
|
|
//-----------------------------------------------------------------------------
|
|
|
|
// RESET, BREAK & CLEAR STATUS
|
|
dbg_uart_wr(CPU_CTL, 16'h0060);
|
|
dbg_uart_wr(CPU_CTL, 16'h0020);
|
|
dbg_uart_wr(BRK2_STAT, 16'h00ff);
|
|
dbg_uart_wr(CPU_STAT, 16'h00ff);
|
|
|
|
|
|
// CONFIGURE BREAKPOINT (ENABLED) & RUN
|
|
dbg_uart_wr(BRK2_ADDR0, (`PER_SIZE+16'h0004));
|
|
dbg_uart_wr(BRK2_ADDR1, (`PER_SIZE+16'h0008));
|
|
dbg_uart_wr(BRK2_CTL, 16'h0006);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h3a)) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - WRITE: test 1 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - WRITE: test 2 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - WRITE: test 3 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0002) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - WRITE: test 4 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0002);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - WRITE: test 5 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h44)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 6 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 7 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 8 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0008) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 9 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0008);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 10 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h0c)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 11 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 12 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 13 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0002) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 14 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0002);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 15 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h14)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 16 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 17 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 18 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0008) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 19 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0008);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 20 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h0c)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 21 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 22 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 23 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0002) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 24 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0002);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - WRITE: test 25 =====");
|
|
|
|
|
|
// HARDWARE BREAKPOINTS: DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE
|
|
//----------------------------------------------------------------------------------
|
|
|
|
// RESET, BREAK & CLEAR STATUS
|
|
dbg_uart_wr(CPU_CTL, 16'h0060);
|
|
dbg_uart_wr(CPU_CTL, 16'h0020);
|
|
dbg_uart_wr(BRK2_STAT, 16'h00ff);
|
|
dbg_uart_wr(CPU_STAT, 16'h00ff);
|
|
|
|
|
|
// CONFIGURE BREAKPOINT (ENABLED) & RUN
|
|
dbg_uart_wr(BRK2_ADDR0, (`PER_SIZE+16'h0004));
|
|
dbg_uart_wr(BRK2_ADDR1, (`PER_SIZE+16'h0008));
|
|
dbg_uart_wr(BRK2_CTL, 16'h0007);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h3a)) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 1 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 2 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 3 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0002) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 4 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0002);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 5 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h44)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 6 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 7 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 8 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0008) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 9 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0008);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 10 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h0c)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 11 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 12 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 13 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0002) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 14 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0002);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 15 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h14)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 16 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 17 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 18 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0008) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 19 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0008);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 20 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h18)) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 21 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 22 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 23 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 24 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0001);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - SINGLE ADDRESSES - READ/WRITE: test 25 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h1C)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 26 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 27 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 28 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0004) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 29 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0004);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - SINGLE ADDRESSES - READ/WRITE: test 30 =====");
|
|
|
|
|
|
// HARDWARE BREAKPOINTS: DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ
|
|
//----------------------------------------------------------------------------
|
|
if (`HWBRK_RANGE)
|
|
begin
|
|
|
|
// RESET, BREAK & CLEAR STATUS
|
|
dbg_uart_wr(CPU_CTL, 16'h0060);
|
|
dbg_uart_wr(CPU_CTL, 16'h0020);
|
|
dbg_uart_wr(BRK2_STAT, 16'h00ff);
|
|
dbg_uart_wr(CPU_STAT, 16'h00ff);
|
|
|
|
|
|
// CONFIGURE BREAKPOINT (ENABLED) & RUN
|
|
dbg_uart_wr(BRK2_ADDR0, (`PER_SIZE+16'h0001));
|
|
dbg_uart_wr(BRK2_ADDR1, (`PER_SIZE+16'h0005));
|
|
dbg_uart_wr(BRK2_CTL, 16'h0015);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h18)) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ: test 1 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ: test 2 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ: test 3 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0010) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ: test 4 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0010);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ: test 5 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h18)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ: test 6 =====");
|
|
if (mem200 !== 16'h0002) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ: test 7 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ: test 8 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0010) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ: test 9 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0010);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ: test 10 =====");
|
|
end
|
|
|
|
|
|
// HARDWARE BREAKPOINTS: DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - WRITE
|
|
//-----------------------------------------------------------------------------
|
|
if (`HWBRK_RANGE)
|
|
begin
|
|
|
|
|
|
// RESET, BREAK & CLEAR STATUS
|
|
dbg_uart_wr(CPU_CTL, 16'h0060);
|
|
dbg_uart_wr(CPU_CTL, 16'h0020);
|
|
dbg_uart_wr(BRK2_STAT, 16'h00ff);
|
|
dbg_uart_wr(CPU_STAT, 16'h00ff);
|
|
|
|
|
|
// CONFIGURE BREAKPOINT (ENABLED) & RUN
|
|
dbg_uart_wr(BRK2_ADDR0, (`PER_SIZE+16'h0001));
|
|
dbg_uart_wr(BRK2_ADDR1, (`PER_SIZE+16'h0005));
|
|
dbg_uart_wr(BRK2_CTL, 16'h0016);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h36)) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - WRITE: test 1 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - WRITE: test 2 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - WRITE: test 3 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - WRITE: test 4 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - WRITE: test 5 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h3a)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 6 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 7 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 8 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 9 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 10 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h08)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 11 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 12 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 13 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 14 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 15 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h0C)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 16 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 17 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 18 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 19 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 20 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h08)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 21 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 22 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 23 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 24 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - WRITE: test 25 =====");
|
|
end
|
|
|
|
|
|
// HARDWARE BREAKPOINTS: DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE
|
|
//----------------------------------------------------------------------------------
|
|
if (`HWBRK_RANGE)
|
|
begin
|
|
|
|
// RESET, BREAK & CLEAR STATUS
|
|
dbg_uart_wr(CPU_CTL, 16'h0060);
|
|
dbg_uart_wr(CPU_CTL, 16'h0020);
|
|
dbg_uart_wr(BRK2_STAT, 16'h00ff);
|
|
dbg_uart_wr(CPU_STAT, 16'h00ff);
|
|
|
|
|
|
// CONFIGURE BREAKPOINT (ENABLED) & RUN
|
|
dbg_uart_wr(BRK2_ADDR0, (`PER_SIZE+16'h0001));
|
|
dbg_uart_wr(BRK2_ADDR1, (`PER_SIZE+16'h0005));
|
|
dbg_uart_wr(BRK2_CTL, 16'h0017);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h36)) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 1 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 2 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 3 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 4 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 5 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h3a)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 6 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 7 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 8 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 9 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 10 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h08)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 11 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 12 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 13 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 14 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 15 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h0C)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 16 =====");
|
|
if (mem200 !== 16'h0000) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 17 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 18 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 19 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 20 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h18)) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 21 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 22 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 23 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0010) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 24 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0010);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== DATA FLOW (EXECUTION-UNIT) - ADDRESS RANGE - READ/WRITE: test 25 =====");
|
|
|
|
// RE-RUN
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
// RE-CHECK
|
|
if (r0 !== ('h10000-`PMEM_SIZE+'h08)) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 26 =====");
|
|
if (mem200 !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 27 =====");
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0041) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 28 =====");
|
|
dbg_uart_rd(BRK2_STAT);
|
|
if (dbg_uart_buf !== 16'h0020) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 29 =====");
|
|
dbg_uart_wr(BRK2_STAT, 16'h0020);
|
|
dbg_uart_rd(CPU_STAT);
|
|
if (dbg_uart_buf !== 16'h0001) tb_error("====== INSTRUCTION FLOW (FRONTEND) - ADDRESS RANGE - READ/WRITE: test 30 =====");
|
|
|
|
end
|
|
|
|
// RE-RUN UNTIL END OF PATTERN
|
|
dbg_uart_wr(BRK2_CTL, 16'h0000);
|
|
dbg_uart_wr(CPU_CTL, 16'h0002);
|
|
repeat(100) @(posedge mclk);
|
|
|
|
|
|
stimulus_done = 1;
|
|
`else
|
|
|
|
$display(" ===============================================");
|
|
$display("| SIMULATION SKIPPED |");
|
|
$display("| (hardware breakpoint unit 2 not included) |");
|
|
$display(" ===============================================");
|
|
$finish;
|
|
`endif
|
|
`else
|
|
|
|
$display(" ===============================================");
|
|
$display("| SIMULATION SKIPPED |");
|
|
$display("| (serial debug interface UART not included) |");
|
|
$display(" ===============================================");
|
|
$finish;
|
|
`endif
|
|
`else
|
|
|
|
$display(" ===============================================");
|
|
$display("| SIMULATION SKIPPED |");
|
|
$display("| (serial debug interface not included) |");
|
|
$display(" ===============================================");
|
|
$finish;
|
|
`endif
|
|
end
|
|
|
|
|
No newline at end of file
|
No newline at end of file
|
