| Line 302... |
Line 302... |
//=============================================================================
|
//=============================================================================
|
|
|
openMSP430 openMSP430_0 (
|
openMSP430 openMSP430_0 (
|
|
|
// OUTPUTs
|
// OUTPUTs
|
.aclk_en (aclk_en), // ACLK enable
|
.aclk (), // ASIC ONLY: ACLK
|
|
.aclk_en (aclk_en), // FPGA ONLY: ACLK enable
|
.dbg_freeze (dbg_freeze), // Freeze peripherals
|
.dbg_freeze (dbg_freeze), // Freeze peripherals
|
.dbg_uart_txd (uart_tx), // Debug interface: UART TXD
|
.dbg_uart_txd (uart_tx), // Debug interface: UART TXD
|
|
.dco_enable (), // ASIC ONLY: Fast oscillator enable
|
|
.dco_wkup (), // ASIC ONLY: Fast oscillator wake-up (asynchronous)
|
.dmem_addr (dmem_addr), // Data Memory address
|
.dmem_addr (dmem_addr), // Data Memory address
|
.dmem_cen (dmem_cen), // Data Memory chip enable (low active)
|
.dmem_cen (dmem_cen), // Data Memory chip enable (low active)
|
.dmem_din (dmem_din), // Data Memory data input
|
.dmem_din (dmem_din), // Data Memory data input
|
.dmem_wen (dmem_wen), // Data Memory write enable (low active)
|
.dmem_wen (dmem_wen), // Data Memory write enable (low active)
|
.irq_acc (irq_acc), // Interrupt request accepted (one-hot signal)
|
.irq_acc (irq_acc), // Interrupt request accepted (one-hot signal)
|
|
.lfxt_enable (), // ASIC ONLY: Low frequency oscillator enable
|
|
.lfxt_wkup (), // ASIC ONLY: Low frequency oscillator wake-up (asynchronous)
|
.mclk (mclk), // Main system clock
|
.mclk (mclk), // Main system clock
|
.per_addr (per_addr), // Peripheral address
|
.per_addr (per_addr), // Peripheral address
|
.per_din (per_din), // Peripheral data input
|
.per_din (per_din), // Peripheral data input
|
.per_we (per_we), // Peripheral write enable (high active)
|
.per_we (per_we), // Peripheral write enable (high active)
|
.per_en (per_en), // Peripheral enable (high active)
|
.per_en (per_en), // Peripheral enable (high active)
|
.pmem_addr (pmem_addr), // Program Memory address
|
.pmem_addr (pmem_addr), // Program Memory address
|
.pmem_cen (pmem_cen), // Program Memory chip enable (low active)
|
.pmem_cen (pmem_cen), // Program Memory chip enable (low active)
|
.pmem_din (pmem_din), // Program Memory data input (optional)
|
.pmem_din (pmem_din), // Program Memory data input (optional)
|
.pmem_wen (pmem_wen), // Program Memory write enable (low active) (optional)
|
.pmem_wen (pmem_wen), // Program Memory write enable (low active) (optional)
|
.puc_rst (puc_rst), // Main system reset
|
.puc_rst (puc_rst), // Main system reset
|
.smclk_en (smclk_en), // SMCLK enable
|
.smclk (), // ASIC ONLY: SMCLK
|
|
.smclk_en (smclk_en), // FPGA ONLY: SMCLK enable
|
|
|
// INPUTs
|
// INPUTs
|
.cpu_en (1'b1), // Enable CPU code execution (asynchronous)
|
.cpu_en (1'b1), // Enable CPU code execution (asynchronous and non-glitchy)
|
.dbg_en (1'b1), // Debug interface enable (asynchronous)
|
.dbg_en (1'b1), // Debug interface enable (asynchronous and non-glitchy)
|
.dbg_uart_rxd (uart_rx), // Debug interface: UART RXD
|
.dbg_uart_rxd (uart_rx), // Debug interface: UART RXD (asynchronous)
|
.dco_clk (dco_clk), // Fast oscillator (fast clock)
|
.dco_clk (dco_clk), // Fast oscillator (fast clock)
|
.dmem_dout (dmem_dout), // Data Memory data output
|
.dmem_dout (dmem_dout), // Data Memory data output
|
.irq (irq_bus), // Maskable interrupts
|
.irq (irq_bus), // Maskable interrupts
|
.lfxt_clk (1'b0), // Low frequency oscillator (typ 32kHz)
|
.lfxt_clk (1'b0), // Low frequency oscillator (typ 32kHz)
|
.nmi (nmi), // Non-maskable interrupt (asynchronous)
|
.nmi (nmi), // Non-maskable interrupt (asynchronous)
|
.per_dout (per_dout), // Peripheral data output
|
.per_dout (per_dout), // Peripheral data output
|
.pmem_dout (pmem_dout), // Program Memory data output
|
.pmem_dout (pmem_dout), // Program Memory data output
|
.reset_n (reset_n) // Reset Pin (low active)
|
.reset_n (reset_n), // Reset Pin (low active, asynchronous and non-glitchy)
|
|
.scan_enable (1'b0), // ASIC ONLY: Scan enable (active during scan shifting)
|
|
.scan_mode (1'b0), // ASIC ONLY: Scan mode
|
|
.wkup (1'b0) // ASIC ONLY: System Wake-up (asynchronous and non-glitchy)
|
);
|
);
|
|
|
|
|
//=============================================================================
|
//=============================================================================
|
// 5) OPENMSP430 PERIPHERALS
|
// 5) OPENMSP430 PERIPHERALS
|
