| Line 77... |
Line 77... |
dbg_uart_rxd, // Debug interface: UART RXD (asynchronous)
|
dbg_uart_rxd, // Debug interface: UART RXD (asynchronous)
|
decode_noirq, // Frontend decode instruction
|
decode_noirq, // Frontend decode instruction
|
eu_mab, // Execution-Unit Memory address bus
|
eu_mab, // Execution-Unit Memory address bus
|
eu_mb_en, // Execution-Unit Memory bus enable
|
eu_mb_en, // Execution-Unit Memory bus enable
|
eu_mb_wr, // Execution-Unit Memory bus write transfer
|
eu_mb_wr, // Execution-Unit Memory bus write transfer
|
eu_mdb_in, // Memory data bus input
|
|
eu_mdb_out, // Memory data bus output
|
|
exec_done, // Execution completed
|
|
fe_mb_en, // Frontend Memory bus enable
|
|
fe_mdb_in, // Frontend Memory data bus input
|
fe_mdb_in, // Frontend Memory data bus input
|
pc, // Program counter
|
pc, // Program counter
|
puc_pnd_set // PUC pending set for the serial debug interface
|
puc_pnd_set // PUC pending set for the serial debug interface
|
);
|
);
|
|
|
| Line 120... |
Line 116... |
input dbg_uart_rxd; // Debug interface: UART RXD (asynchronous)
|
input dbg_uart_rxd; // Debug interface: UART RXD (asynchronous)
|
input decode_noirq; // Frontend decode instruction
|
input decode_noirq; // Frontend decode instruction
|
input [15:0] eu_mab; // Execution-Unit Memory address bus
|
input [15:0] eu_mab; // Execution-Unit Memory address bus
|
input eu_mb_en; // Execution-Unit Memory bus enable
|
input eu_mb_en; // Execution-Unit Memory bus enable
|
input [1:0] eu_mb_wr; // Execution-Unit Memory bus write transfer
|
input [1:0] eu_mb_wr; // Execution-Unit Memory bus write transfer
|
input [15:0] eu_mdb_in; // Memory data bus input
|
|
input [15:0] eu_mdb_out; // Memory data bus output
|
|
input exec_done; // Execution completed
|
|
input fe_mb_en; // Frontend Memory bus enable
|
|
input [15:0] fe_mdb_in; // Frontend Memory data bus input
|
input [15:0] fe_mdb_in; // Frontend Memory data bus input
|
input [15:0] pc; // Program counter
|
input [15:0] pc; // Program counter
|
input puc_pnd_set; // PUC pending set for the serial debug interface
|
input puc_pnd_set; // PUC pending set for the serial debug interface
|
|
|
|
|
| Line 433... |
Line 425... |
wire mem_addr_wr = reg_wr[MEM_ADDR];
|
wire mem_addr_wr = reg_wr[MEM_ADDR];
|
wire dbg_mem_acc = (|dbg_mem_wr | (dbg_rd_rdy & ~mem_ctl[2]));
|
wire dbg_mem_acc = (|dbg_mem_wr | (dbg_rd_rdy & ~mem_ctl[2]));
|
wire dbg_reg_acc = ( dbg_reg_wr | (dbg_rd_rdy & mem_ctl[2]));
|
wire dbg_reg_acc = ( dbg_reg_wr | (dbg_rd_rdy & mem_ctl[2]));
|
|
|
wire [15:0] mem_addr_inc = (mem_cnt==16'h0000) ? 16'h0000 :
|
wire [15:0] mem_addr_inc = (mem_cnt==16'h0000) ? 16'h0000 :
|
(dbg_mem_acc & ~mem_bw) ? 16'h0002 :
|
(mem_burst & dbg_mem_acc & ~mem_bw) ? 16'h0002 :
|
(dbg_mem_acc | dbg_reg_acc) ? 16'h0001 : 16'h0000;
|
(mem_burst & (dbg_mem_acc | dbg_reg_acc)) ? 16'h0001 : 16'h0000;
|
|
|
always @ (posedge dbg_clk or posedge dbg_rst)
|
always @ (posedge dbg_clk or posedge dbg_rst)
|
if (dbg_rst) mem_addr <= 16'h0000;
|
if (dbg_rst) mem_addr <= 16'h0000;
|
else if (mem_addr_wr) mem_addr <= dbg_din;
|
else if (mem_addr_wr) mem_addr <= dbg_din;
|
else mem_addr <= mem_addr + mem_addr_inc;
|
else mem_addr <= mem_addr + mem_addr_inc;
|
| Line 485... |
Line 477... |
.brk_reg_rd (brk0_reg_rd), // Hardware break/watch-point register read select
|
.brk_reg_rd (brk0_reg_rd), // Hardware break/watch-point register read select
|
.brk_reg_wr (brk0_reg_wr), // Hardware break/watch-point register write select
|
.brk_reg_wr (brk0_reg_wr), // Hardware break/watch-point register write select
|
.dbg_clk (dbg_clk), // Debug unit clock
|
.dbg_clk (dbg_clk), // Debug unit clock
|
.dbg_din (dbg_din), // Debug register data input
|
.dbg_din (dbg_din), // Debug register data input
|
.dbg_rst (dbg_rst), // Debug unit reset
|
.dbg_rst (dbg_rst), // Debug unit reset
|
|
.decode_noirq (decode_noirq), // Frontend decode instruction
|
.eu_mab (eu_mab), // Execution-Unit Memory address bus
|
.eu_mab (eu_mab), // Execution-Unit Memory address bus
|
.eu_mb_en (eu_mb_en), // Execution-Unit Memory bus enable
|
.eu_mb_en (eu_mb_en), // Execution-Unit Memory bus enable
|
.eu_mb_wr (eu_mb_wr), // Execution-Unit Memory bus write transfer
|
.eu_mb_wr (eu_mb_wr), // Execution-Unit Memory bus write transfer
|
.eu_mdb_in (eu_mdb_in), // Memory data bus input
|
|
.eu_mdb_out (eu_mdb_out), // Memory data bus output
|
|
.exec_done (exec_done), // Execution completed
|
|
.fe_mb_en (fe_mb_en), // Frontend Memory bus enable
|
|
.pc (pc) // Program counter
|
.pc (pc) // Program counter
|
);
|
);
|
|
|
`else
|
`else
|
assign brk0_halt = 1'b0;
|
assign brk0_halt = 1'b0;
|
| Line 527... |
Line 516... |
.brk_reg_rd (brk1_reg_rd), // Hardware break/watch-point register read select
|
.brk_reg_rd (brk1_reg_rd), // Hardware break/watch-point register read select
|
.brk_reg_wr (brk1_reg_wr), // Hardware break/watch-point register write select
|
.brk_reg_wr (brk1_reg_wr), // Hardware break/watch-point register write select
|
.dbg_clk (dbg_clk), // Debug unit clock
|
.dbg_clk (dbg_clk), // Debug unit clock
|
.dbg_din (dbg_din), // Debug register data input
|
.dbg_din (dbg_din), // Debug register data input
|
.dbg_rst (dbg_rst), // Debug unit reset
|
.dbg_rst (dbg_rst), // Debug unit reset
|
|
.decode_noirq (decode_noirq), // Frontend decode instruction
|
.eu_mab (eu_mab), // Execution-Unit Memory address bus
|
.eu_mab (eu_mab), // Execution-Unit Memory address bus
|
.eu_mb_en (eu_mb_en), // Execution-Unit Memory bus enable
|
.eu_mb_en (eu_mb_en), // Execution-Unit Memory bus enable
|
.eu_mb_wr (eu_mb_wr), // Execution-Unit Memory bus write transfer
|
.eu_mb_wr (eu_mb_wr), // Execution-Unit Memory bus write transfer
|
.eu_mdb_in (eu_mdb_in), // Memory data bus input
|
|
.eu_mdb_out (eu_mdb_out), // Memory data bus output
|
|
.exec_done (exec_done), // Execution completed
|
|
.fe_mb_en (fe_mb_en), // Frontend Memory bus enable
|
|
.pc (pc) // Program counter
|
.pc (pc) // Program counter
|
);
|
);
|
|
|
`else
|
`else
|
assign brk1_halt = 1'b0;
|
assign brk1_halt = 1'b0;
|
| Line 569... |
Line 555... |
.brk_reg_rd (brk2_reg_rd), // Hardware break/watch-point register read select
|
.brk_reg_rd (brk2_reg_rd), // Hardware break/watch-point register read select
|
.brk_reg_wr (brk2_reg_wr), // Hardware break/watch-point register write select
|
.brk_reg_wr (brk2_reg_wr), // Hardware break/watch-point register write select
|
.dbg_clk (dbg_clk), // Debug unit clock
|
.dbg_clk (dbg_clk), // Debug unit clock
|
.dbg_din (dbg_din), // Debug register data input
|
.dbg_din (dbg_din), // Debug register data input
|
.dbg_rst (dbg_rst), // Debug unit reset
|
.dbg_rst (dbg_rst), // Debug unit reset
|
|
.decode_noirq (decode_noirq), // Frontend decode instruction
|
.eu_mab (eu_mab), // Execution-Unit Memory address bus
|
.eu_mab (eu_mab), // Execution-Unit Memory address bus
|
.eu_mb_en (eu_mb_en), // Execution-Unit Memory bus enable
|
.eu_mb_en (eu_mb_en), // Execution-Unit Memory bus enable
|
.eu_mb_wr (eu_mb_wr), // Execution-Unit Memory bus write transfer
|
.eu_mb_wr (eu_mb_wr), // Execution-Unit Memory bus write transfer
|
.eu_mdb_in (eu_mdb_in), // Memory data bus input
|
|
.eu_mdb_out (eu_mdb_out), // Memory data bus output
|
|
.exec_done (exec_done), // Execution completed
|
|
.fe_mb_en (fe_mb_en), // Frontend Memory bus enable
|
|
.pc (pc) // Program counter
|
.pc (pc) // Program counter
|
);
|
);
|
|
|
`else
|
`else
|
assign brk2_halt = 1'b0;
|
assign brk2_halt = 1'b0;
|
| Line 611... |
Line 594... |
.brk_reg_rd (brk3_reg_rd), // Hardware break/watch-point register read select
|
.brk_reg_rd (brk3_reg_rd), // Hardware break/watch-point register read select
|
.brk_reg_wr (brk3_reg_wr), // Hardware break/watch-point register write select
|
.brk_reg_wr (brk3_reg_wr), // Hardware break/watch-point register write select
|
.dbg_clk (dbg_clk), // Debug unit clock
|
.dbg_clk (dbg_clk), // Debug unit clock
|
.dbg_din (dbg_din), // Debug register data input
|
.dbg_din (dbg_din), // Debug register data input
|
.dbg_rst (dbg_rst), // Debug unit reset
|
.dbg_rst (dbg_rst), // Debug unit reset
|
|
.decode_noirq (decode_noirq), // Frontend decode instruction
|
.eu_mab (eu_mab), // Execution-Unit Memory address bus
|
.eu_mab (eu_mab), // Execution-Unit Memory address bus
|
.eu_mb_en (eu_mb_en), // Execution-Unit Memory bus enable
|
.eu_mb_en (eu_mb_en), // Execution-Unit Memory bus enable
|
.eu_mb_wr (eu_mb_wr), // Execution-Unit Memory bus write transfer
|
.eu_mb_wr (eu_mb_wr), // Execution-Unit Memory bus write transfer
|
.eu_mdb_in (eu_mdb_in), // Memory data bus input
|
|
.eu_mdb_out (eu_mdb_out), // Memory data bus output
|
|
.exec_done (exec_done), // Execution completed
|
|
.fe_mb_en (fe_mb_en), // Frontend Memory bus enable
|
|
.pc (pc) // Program counter
|
.pc (pc) // Program counter
|
);
|
);
|
|
|
`else
|
`else
|
assign brk3_halt = 1'b0;
|
assign brk3_halt = 1'b0;
|
