OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [Makefile.tpl] - Diff between revs 834 and 842

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 834 Rev 842
?rev1line?
?rev2line?
 
[+ AutoGen5 template -*- Mode: Makefile -*-
 
in
 
+]
 
 
 
# Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'.
 
#
 
# Makefile for directory with subdirs to build.
 
#   Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
 
#   1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
 
#   Free Software Foundation
 
#
 
# This file is free software; you can redistribute it and/or modify
 
# it under the terms of the GNU General Public License as published by
 
# the Free Software Foundation; either version 3 of the License, or
 
# (at your option) any later version.
 
#
 
# This program is distributed in the hope that it will be useful,
 
# but WITHOUT ANY WARRANTY; without even the implied warranty of
 
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 
# GNU General Public License for more details.
 
#
 
# You should have received a copy of the GNU General Public License
 
# along with this program; see the file COPYING3.  If not see
 
# .
 
#
 
 
 
# First, test for a proper version of make, but only where one is required.
 
 
 
@if gcc
 
ifeq (,$(.VARIABLES)) # The variable .VARIABLES, new with 3.80, is never empty.
 
$(error GNU make version 3.80 or newer is required.)
 
endif
 
@endif gcc
 
 
 
# -------------------------------
 
# Standard Autoconf-set variables
 
# -------------------------------
 
VPATH=@srcdir@
 
 
 
build_alias=@build_noncanonical@
 
build_vendor=@build_vendor@
 
build_os=@build_os@
 
build=@build@
 
host_alias=@host_noncanonical@
 
host_vendor=@host_vendor@
 
host_os=@host_os@
 
host=@host@
 
target_alias=@target_noncanonical@
 
target_vendor=@target_vendor@
 
target_os=@target_os@
 
target=@target@
 
 
 
program_transform_name = @program_transform_name@
 
 
 
prefix = @prefix@
 
exec_prefix = @exec_prefix@
 
 
 
srcdir = @srcdir@
 
 
 
bindir = @bindir@
 
sbindir = @sbindir@
 
libexecdir = @libexecdir@
 
datadir = @datadir@
 
sysconfdir = @sysconfdir@
 
sharedstatedir = @sharedstatedir@
 
localstatedir = @localstatedir@
 
libdir = @libdir@
 
includedir = @includedir@
 
oldincludedir = @oldincludedir@
 
infodir = @infodir@
 
datarootdir = @datarootdir@
 
docdir = @docdir@
 
pdfdir = @pdfdir@
 
htmldir = @htmldir@
 
mandir = @mandir@
 
man1dir = $(mandir)/man1
 
man2dir = $(mandir)/man2
 
man3dir = $(mandir)/man3
 
man4dir = $(mandir)/man4
 
man5dir = $(mandir)/man5
 
man6dir = $(mandir)/man6
 
man7dir = $(mandir)/man7
 
man8dir = $(mandir)/man8
 
man9dir = $(mandir)/man9
 
 
 
INSTALL = @INSTALL@
 
INSTALL_PROGRAM = @INSTALL_PROGRAM@
 
INSTALL_SCRIPT = @INSTALL_SCRIPT@
 
INSTALL_DATA = @INSTALL_DATA@
 
LN = @LN@
 
LN_S = @LN_S@
 
MAINT = @MAINT@
 
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
 
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 
 
 
# -------------------------------------------------
 
# Miscellaneous non-standard autoconf-set variables
 
# -------------------------------------------------
 
 
 
# The gcc driver likes to know the arguments it was configured with.
 
TOPLEVEL_CONFIGURE_ARGUMENTS=@TOPLEVEL_CONFIGURE_ARGUMENTS@
 
 
 
tooldir = @tooldir@
 
build_tooldir = @build_tooldir@
 
 
 
GDB_NLM_DEPS =
 
 
 
# This is the name of the environment variable used for the path to
 
# the libraries.
 
RPATH_ENVVAR = @RPATH_ENVVAR@
 
 
 
# On targets where RPATH_ENVVAR is PATH, a subdirectory of the GCC build path
 
# is used instead of the directory itself to avoid including built
 
# executables in PATH.
 
GCC_SHLIB_SUBDIR = @GCC_SHLIB_SUBDIR@
 
 
 
# Build programs are put under this directory.
 
BUILD_SUBDIR = @build_subdir@
 
# This is set by the configure script to the arguments to use when configuring
 
# directories built for the build system.
 
BUILD_CONFIGARGS = @build_configargs@ --with-build-subdir="$(BUILD_SUBDIR)"
 
 
 
# Linker flags to use on the host, for stage1 or when not
 
# bootstrapping.
 
STAGE1_LDFLAGS = @stage1_ldflags@
 
 
 
# Libraries to use on the host, for stage1 or when not bootstrapping.
 
STAGE1_LIBS = @stage1_libs@
 
 
 
# Linker flags to use for stage2 and later.
 
POSTSTAGE1_LDFLAGS = @poststage1_ldflags@
 
 
 
# Libraries to use for stage2 and later.
 
POSTSTAGE1_LIBS = @poststage1_libs@
 
 
 
# This is the list of variables to export in the environment when
 
# configuring any subdirectory.  It must also be exported whenever
 
# recursing into a build directory in case that directory's Makefile
 
# re-runs configure.
 
BASE_EXPORTS = \
 
        FLEX="$(FLEX)"; export FLEX; \
 
        LEX="$(LEX)"; export LEX; \
 
        BISON="$(BISON)"; export BISON; \
 
        YACC="$(YACC)"; export YACC; \
 
        M4="$(M4)"; export M4; \
 
        SED="$(SED)"; export SED; \
 
        AWK="$(AWK)"; export AWK; \
 
        MAKEINFO="$(MAKEINFO)"; export MAKEINFO;
 
 
 
# This is the list of variables to export in the environment when
 
# configuring subdirectories for the build system.
 
BUILD_EXPORTS = \
 
        $(BASE_EXPORTS) \
 
        AR="$(AR_FOR_BUILD)"; export AR; \
 
        AS="$(AS_FOR_BUILD)"; export AS; \
 
        CC="$(CC_FOR_BUILD)"; export CC; \
 
        CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
 
        CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
 
        CXX="$(CXX_FOR_BUILD)"; export CXX; \
 
        CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
 
        GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
 
        GFORTRAN="$(GFORTRAN_FOR_BUILD)"; export GFORTRAN; \
 
        DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
 
        LD="$(LD_FOR_BUILD)"; export LD; \
 
        LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
 
        NM="$(NM_FOR_BUILD)"; export NM; \
 
        RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
 
        WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
 
        WINDMC="$(WINDMC_FOR_BUILD)"; export WINDMC;
 
 
 
# These variables must be set on the make command line for directories
 
# built for the build system to override those in BASE_FLAGS_TO_PASSS.
 
EXTRA_BUILD_FLAGS = \
 
        CFLAGS="$(CFLAGS_FOR_BUILD)" \
 
        LDFLAGS="$(LDFLAGS_FOR_BUILD)"
 
 
 
# This is the list of directories to built for the host system.
 
SUBDIRS = @configdirs@
 
TARGET_CONFIGDIRS = @target_configdirs@
 
# This is set by the configure script to the arguments to use when configuring
 
# directories built for the host system.
 
HOST_CONFIGARGS = @host_configargs@
 
# Host programs are put under this directory, which is . except if building
 
# with srcdir=..
 
HOST_SUBDIR = @host_subdir@
 
# This is the list of variables to export in the environment when
 
# configuring subdirectories for the host system.  We need to pass
 
# some to the GCC configure because of its hybrid host/target nature.
 
HOST_EXPORTS = \
 
        $(BASE_EXPORTS) \
 
        CC="$(CC)"; export CC; \
 
        ADA_CFLAGS="$(ADA_CFLAGS)"; export ADA_CFLAGS; \
 
        CFLAGS="$(CFLAGS)"; export CFLAGS; \
 
        CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
 
        CXX="$(CXX)"; export CXX; \
 
        CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
 
        GCJ="$(GCJ)"; export GCJ; \
 
        GFORTRAN="$(GFORTRAN)"; export GFORTRAN; \
 
        AR="$(AR)"; export AR; \
 
        AS="$(AS)"; export AS; \
 
        CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
 
        DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
 
        LD="$(LD)"; export LD; \
 
        LDFLAGS="$(STAGE1_LDFLAGS) $(LDFLAGS)"; export LDFLAGS; \
 
        NM="$(NM)"; export NM; \
 
        RANLIB="$(RANLIB)"; export RANLIB; \
 
        WINDRES="$(WINDRES)"; export WINDRES; \
 
        WINDMC="$(WINDMC)"; export WINDMC; \
 
        OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
 
        OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
 
        AR_FOR_TARGET="$(AR_FOR_TARGET)"; export AR_FOR_TARGET; \
 
        AS_FOR_TARGET="$(AS_FOR_TARGET)"; export AS_FOR_TARGET; \
 
        GCC_FOR_TARGET="$(GCC_FOR_TARGET)"; export GCC_FOR_TARGET; \
 
        LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \
 
        NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \
 
        OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \
 
        RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \
 
        TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
 
        HOST_LIBS="$(STAGE1_LIBS)"; export HOST_LIBS; \
 
        GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \
 
        GMPINC="$(HOST_GMPINC)"; export GMPINC; \
 
        PPLLIBS="$(HOST_PPLLIBS)"; export PPLLIBS; \
 
        PPLINC="$(HOST_PPLINC)"; export PPLINC; \
 
        CLOOGLIBS="$(HOST_CLOOGLIBS)"; export CLOOGLIBS; \
 
        CLOOGINC="$(HOST_CLOOGINC)"; export CLOOGINC; \
 
        LIBELFLIBS="$(HOST_LIBELFLIBS)" ; export LIBELFLIBS; \
 
        LIBELFINC="$(HOST_LIBELFINC)" ; export LIBELFINC; \
 
@if gcc-bootstrap
 
        $(RPATH_ENVVAR)=`echo "$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
 
@endif gcc-bootstrap
 
        $(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
 
 
 
POSTSTAGE1_CXX_EXPORT = \
 
        CXX='$(CXX)'; export CXX; \
 
        CXX_FOR_BUILD='$(CXX_FOR_BUILD)'; export CXX_FOR_BUILD;
 
@if target-libstdc++-v3-bootstrap
 
# Override the above if we're bootstrapping C++.
 
POSTSTAGE1_CXX_EXPORT = \
 
        CXX="$(STAGE_CC_WRAPPER) $$r/$(HOST_SUBDIR)/prev-gcc/g++$(exeext) \
 
          -B$$r/$(HOST_SUBDIR)/prev-gcc/ -B$(build_tooldir)/bin/ -nostdinc++ \
 
          -I$$r/prev-$(TARGET_SUBDIR)/libstdc++-v3/include/$(TARGET_SUBDIR) \
 
          -I$$r/prev-$(TARGET_SUBDIR)/libstdc++-v3/include \
 
          -I$$s/libstdc++-v3/libsupc++ \
 
          -L$$r/prev-$(TARGET_SUBDIR)/libstdc++-v3/src/.libs"; export CXX; \
 
        CXX_FOR_BUILD="$$CXX"; export CXX_FOR_BUILD;
 
@endif target-libstdc++-v3-bootstrap
 
 
 
# Similar, for later GCC stages.
 
POSTSTAGE1_HOST_EXPORTS = \
 
        $(HOST_EXPORTS) \
 
        CC="$(STAGE_CC_WRAPPER) $$r/$(HOST_SUBDIR)/prev-gcc/xgcc$(exeext) \
 
          -B$$r/$(HOST_SUBDIR)/prev-gcc/ -B$(build_tooldir)/bin/ \
 
          $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export CC; \
 
        CC_FOR_BUILD="$$CC"; export CC_FOR_BUILD; \
 
        $(POSTSTAGE1_CXX_EXPORT) \
 
        GNATBIND="$$r/$(HOST_SUBDIR)/prev-gcc/gnatbind"; export GNATBIND; \
 
        LDFLAGS="$(POSTSTAGE1_LDFLAGS) $(BOOT_LDFLAGS)"; export LDFLAGS; \
 
        HOST_LIBS="$(POSTSTAGE1_LIBS)"; export HOST_LIBS;
 
 
 
# Target libraries are put under this directory:
 
TARGET_SUBDIR = @target_subdir@
 
# This is set by the configure script to the arguments to use when configuring
 
# directories built for the target.
 
TARGET_CONFIGARGS = @target_configargs@ --with-target-subdir="$(TARGET_SUBDIR)"
 
# This is the list of variables to export in the environment when
 
# configuring subdirectories for the target system.
 
BASE_TARGET_EXPORTS = \
 
        $(BASE_EXPORTS) \
 
        AR="$(AR_FOR_TARGET)"; export AR; \
 
        AS="$(COMPILER_AS_FOR_TARGET)"; export AS; \
 
        CC="$(CC_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export CC; \
 
        CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
 
        CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
 
        CPPFLAGS="$(CPPFLAGS_FOR_TARGET)"; export CPPFLAGS; \
 
        CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
 
        GCJ="$(GCJ_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GCJ; \
 
        GFORTRAN="$(GFORTRAN_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GFORTRAN; \
 
        DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
 
        LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \
 
        LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
 
        LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \
 
        NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \
 
        OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \
 
        RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
 
        STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \
 
        WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
 
        WINDMC="$(WINDMC_FOR_TARGET)"; export WINDMC; \
 
@if gcc-bootstrap
 
        $(RPATH_ENVVAR)=`echo "$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
 
@endif gcc-bootstrap
 
        $(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
 
        TARGET_CONFIGDIRS="$(TARGET_CONFIGDIRS)"; export TARGET_CONFIGDIRS;
 
 
 
RAW_CXX_TARGET_EXPORTS = \
 
        $(BASE_TARGET_EXPORTS) \
 
        CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \
 
        CXX="$(RAW_CXX_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export CXX;
 
 
 
NORMAL_TARGET_EXPORTS = \
 
        $(BASE_TARGET_EXPORTS) \
 
        CXX="$(CXX_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export CXX;
 
 
 
# Where to find GMP
 
HOST_GMPLIBS = @gmplibs@
 
HOST_GMPINC = @gmpinc@
 
 
 
# Where to find PPL
 
HOST_PPLLIBS = @ppllibs@
 
HOST_PPLINC = @pplinc@
 
 
 
# Where to find CLOOG
 
HOST_CLOOGLIBS = @clooglibs@
 
HOST_CLOOGINC = @clooginc@
 
 
 
# Where to find libelf
 
HOST_LIBELFLIBS = @libelflibs@
 
HOST_LIBELFINC = @libelfinc@
 
 
 
# ----------------------------------------------
 
# Programs producing files for the BUILD machine
 
# ----------------------------------------------
 
 
 
SHELL = @config_shell@
 
 
 
# pwd command to use.  Allow user to override default by setting PWDCMD in
 
# the environment to account for automounters.  The make variable must not
 
# be called PWDCMD, otherwise the value set here is passed to make
 
# subprocesses and overrides the setting from the user's environment.
 
# Don't use PWD since it is a common shell environment variable and we
 
# don't want to corrupt it.
 
PWD_COMMAND = $${PWDCMD-pwd}
 
 
 
# compilers to use to create programs which must be run in the build
 
# environment.
 
AR_FOR_BUILD = @AR_FOR_BUILD@
 
AS_FOR_BUILD = @AS_FOR_BUILD@
 
CC_FOR_BUILD = @CC_FOR_BUILD@
 
CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
 
CXXFLAGS_FOR_BUILD = @CXXFLAGS_FOR_BUILD@
 
CXX_FOR_BUILD = @CXX_FOR_BUILD@
 
DLLTOOL_FOR_BUILD = @DLLTOOL_FOR_BUILD@
 
GCJ_FOR_BUILD = @GCJ_FOR_BUILD@
 
GFORTRAN_FOR_BUILD = @GFORTRAN_FOR_BUILD@
 
LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
 
LD_FOR_BUILD = @LD_FOR_BUILD@
 
NM_FOR_BUILD = @NM_FOR_BUILD@
 
RANLIB_FOR_BUILD = @RANLIB_FOR_BUILD@
 
WINDMC_FOR_BUILD = @WINDMC_FOR_BUILD@
 
WINDRES_FOR_BUILD = @WINDRES_FOR_BUILD@
 
 
 
# Special variables passed down in EXTRA_GCC_FLAGS.  They are defined
 
# here so that they can be overridden by Makefile fragments.
 
BUILD_PREFIX = @BUILD_PREFIX@
 
BUILD_PREFIX_1 = @BUILD_PREFIX_1@
 
 
 
# Flags to pass to stage2 and later makes.  They are defined
 
# here so that they can be overridden by Makefile fragments.
 
BOOT_CFLAGS= -g -O2
 
BOOT_LDFLAGS=
 
BOOT_ADAFLAGS=-gnatpg -gnata
 
 
 
AWK = @AWK@
 
SED = @SED@
 
BISON = @BISON@
 
YACC = @YACC@
 
FLEX = @FLEX@
 
LEX = @LEX@
 
M4 = @M4@
 
MAKEINFO = @MAKEINFO@
 
EXPECT = @EXPECT@
 
RUNTEST = @RUNTEST@
 
 
 
# This just becomes part of the MAKEINFO definition passed down to
 
# sub-makes.  It lets flags be given on the command line while still
 
# using the makeinfo from the object tree.
 
# (Default to avoid splitting info files by setting the threshold high.)
 
MAKEINFOFLAGS = --split-size=5000000
 
 
 
# ---------------------------------------------
 
# Programs producing files for the HOST machine
 
# ---------------------------------------------
 
 
 
AS = @AS@
 
AR = @AR@
 
AR_FLAGS = rc
 
CC = @CC@
 
CXX = @CXX@
 
DLLTOOL = @DLLTOOL@
 
LD = @LD@
 
LIPO = @LIPO@
 
NM = @NM@
 
OBJDUMP = @OBJDUMP@
 
RANLIB = @RANLIB@
 
STRIP = @STRIP@
 
WINDRES = @WINDRES@
 
WINDMC = @WINDMC@
 
 
 
GNATBIND = @GNATBIND@
 
GNATMAKE = @GNATMAKE@
 
 
 
CFLAGS = @CFLAGS@
 
LDFLAGS = @LDFLAGS@
 
LIBCFLAGS = $(CFLAGS)
 
CXXFLAGS = @CXXFLAGS@
 
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
 
 
 
TFLAGS =
 
 
 
# Defaults for all stages; some are overridden below.
 
 
 
STAGE_CFLAGS = $(BOOT_CFLAGS)
 
STAGE_TFLAGS = $(TFLAGS)
 
STAGE_CONFIGURE_FLAGS=@stage2_werror_flag@
 
 
 
[+ FOR bootstrap-stage +]
 
# Defaults for stage [+id+]; some are overridden below.
 
STAGE[+id+]_CFLAGS = $(STAGE_CFLAGS)
 
STAGE[+id+]_CXXFLAGS = $(CXXFLAGS)
 
@if target-libstdc++-v3-bootstrap
 
# Override the above if we're bootstrapping C++.
 
STAGE[+id+]_CXXFLAGS = $(STAGE[+id+]_CFLAGS)
 
@endif target-libstdc++-v3-bootstrap
 
STAGE[+id+]_TFLAGS = $(STAGE_TFLAGS)
 
STAGE[+id+]_CONFIGURE_FLAGS = $(STAGE_CONFIGURE_FLAGS)
 
[+ ENDFOR bootstrap-stage +]
 
 
 
# Only build the C compiler for stage1, because that is the only one that
 
# we can guarantee will build with the native compiler, and also it is the
 
# only thing useful for building stage2. STAGE1_CFLAGS (via CFLAGS),
 
# MAKEINFO and MAKEINFOFLAGS are explicitly passed here to make them
 
# overrideable (for a bootstrap build stage1 also builds gcc.info).
 
 
 
STAGE1_CFLAGS = @stage1_cflags@
 
STAGE1_CHECKING = @stage1_checking@
 
STAGE1_LANGUAGES = @stage1_languages@
 
# * We force-disable intermodule optimizations, even if
 
#   --enable-intermodule was passed, since the installed compiler
 
#   probably can't handle them.  Luckily, autoconf always respects
 
#   the last argument when conflicting --enable arguments are passed.
 
# * Likewise, we force-disable coverage flags, since the installed
 
#   compiler probably has never heard of them.
 
STAGE1_CONFIGURE_FLAGS = --disable-intermodule $(STAGE1_CHECKING) \
 
          --disable-coverage --enable-languages="$(STAGE1_LANGUAGES)"
 
 
 
STAGEprofile_CFLAGS = $(STAGE2_CFLAGS) -fprofile-generate
 
STAGEprofile_TFLAGS = $(STAGE2_TFLAGS)
 
 
 
STAGEfeedback_CFLAGS = $(STAGE3_CFLAGS) -fprofile-use
 
STAGEfeedback_TFLAGS = $(STAGE3_TFLAGS)
 
 
 
do-compare = @do_compare@
 
do-compare3 = $(do-compare)
 
 
 
# -----------------------------------------------
 
# Programs producing files for the TARGET machine
 
# -----------------------------------------------
 
 
 
AR_FOR_TARGET=@AR_FOR_TARGET@
 
AS_FOR_TARGET=@AS_FOR_TARGET@
 
CC_FOR_TARGET=$(STAGE_CC_WRAPPER) @CC_FOR_TARGET@
 
 
 
# If GCC_FOR_TARGET is not overriden on the command line, then this
 
# variable is passed down to the gcc Makefile, where it is used to
 
# build libgcc2.a.  We define it here so that it can itself be
 
# overridden on the command line.
 
GCC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCC_FOR_TARGET@
 
CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @CXX_FOR_TARGET@
 
RAW_CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @RAW_CXX_FOR_TARGET@
 
GCJ_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCJ_FOR_TARGET@
 
GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@
 
DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
 
LD_FOR_TARGET=@LD_FOR_TARGET@
 
 
 
LIPO_FOR_TARGET=@LIPO_FOR_TARGET@
 
NM_FOR_TARGET=@NM_FOR_TARGET@
 
OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@
 
RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
 
STRIP_FOR_TARGET=@STRIP_FOR_TARGET@
 
WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
 
WINDMC_FOR_TARGET=@WINDMC_FOR_TARGET@
 
 
 
COMPILER_AS_FOR_TARGET=@COMPILER_AS_FOR_TARGET@
 
COMPILER_LD_FOR_TARGET=@COMPILER_LD_FOR_TARGET@
 
COMPILER_NM_FOR_TARGET=@COMPILER_NM_FOR_TARGET@
 
 
 
CFLAGS_FOR_TARGET = @CFLAGS_FOR_TARGET@
 
CXXFLAGS_FOR_TARGET = @CXXFLAGS_FOR_TARGET@
 
 
 
LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
 
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
 
LDFLAGS_FOR_TARGET =
 
 
 
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
 
SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@
 
DEBUG_PREFIX_CFLAGS_FOR_TARGET = @DEBUG_PREFIX_CFLAGS_FOR_TARGET@
 
 
 
XGCC_FLAGS_FOR_TARGET = $(FLAGS_FOR_TARGET) $(SYSROOT_CFLAGS_FOR_TARGET) $(DEBUG_PREFIX_CFLAGS_FOR_TARGET)
 
 
 
# ------------------------------------
 
# Miscellaneous targets and flag lists
 
# ------------------------------------
 
 
 
# The first rule in the file had better be this one.  Don't put any above it.
 
# This lives here to allow makefile fragments to contain dependencies.
 
all:
 
 
 
#### host and target specific makefile fragments come in here.
 
@target_makefile_frag@
 
@alphaieee_frag@
 
@ospace_frag@
 
@host_makefile_frag@
 
###
 
 
 
# This is the list of directories that may be needed in RPATH_ENVVAR
 
# so that prorgams built for the target machine work.
 
TARGET_LIB_PATH = [+ FOR target_modules +][+
 
  IF lib_path +]$(TARGET_LIB_PATH_[+module+])[+ ENDIF lib_path +][+
 
  ENDFOR target_modules +]$(HOST_LIB_PATH_gcc)
 
[+ FOR target_modules +][+ IF lib_path +]
 
@if target-[+module+]
 
TARGET_LIB_PATH_[+module+] = $$r/$(TARGET_SUBDIR)/[+module+]/[+lib_path+]:
 
@endif target-[+module+]
 
[+ ENDIF lib_path +][+ ENDFOR target_modules +]
 
 
 
 
 
# This is the list of directories that may be needed in RPATH_ENVVAR
 
# so that programs built for the host machine work.
 
HOST_LIB_PATH = [+ FOR host_modules +][+
 
  IF lib_path +]$(HOST_LIB_PATH_[+module+])[+ ENDIF lib_path +][+
 
  ENDFOR host_modules +]
 
 
 
# Define HOST_LIB_PATH_gcc here, for the sake of TARGET_LIB_PATH, ouch
 
@if gcc
 
HOST_LIB_PATH_gcc = $$r/$(HOST_SUBDIR)/gcc$(GCC_SHLIB_SUBDIR):$$r/$(HOST_SUBDIR)/prev-gcc$(GCC_SHLIB_SUBDIR):
 
@endif gcc
 
 
 
[+ FOR host_modules +][+ IF lib_path +]
 
@if [+module+]
 
HOST_LIB_PATH_[+module+] = \
 
  $$r/$(HOST_SUBDIR)/[+module+]/[+lib_path+]:[+ IF bootstrap
 
  +]$$r/$(HOST_SUBDIR)/prev-[+module+]/[+lib_path+]:[+ ENDIF bootstrap +]
 
@endif [+module+]
 
[+ ENDIF lib_path +][+ ENDFOR host_modules +]
 
 
 
# Flags to pass down to all sub-makes.
 
BASE_FLAGS_TO_PASS =[+ FOR flags_to_pass +][+ IF optional +] \
 
        "`echo '[+flag+]=$([+flag+])' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"[+ ELSE optional +] \
 
        "[+flag+]=$([+flag+])"[+ ENDIF optional+][+ ENDFOR flags_to_pass +][+ FOR bootstrap-stage +] \
 
        "STAGE[+id+]_CFLAGS=$(STAGE[+id+]_CFLAGS)" \
 
        "STAGE[+id+]_CXXFLAGS=$(STAGE[+id+]_CXXFLAGS)" \
 
        "STAGE[+id+]_TFLAGS=$(STAGE[+id+]_TFLAGS)"[+ ENDFOR bootstrap-stage +] \
 
        "TFLAGS=$(TFLAGS)" \
 
        "CONFIG_SHELL=$(SHELL)" \
 
        "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)"
 
 
 
# We leave this in just in case, but it is not needed anymore.
 
RECURSE_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS)
 
 
 
# Flags to pass down to most sub-makes, in which we're building with
 
# the host environment.
 
EXTRA_HOST_FLAGS = \
 
        'AR=$(AR)' \
 
        'AS=$(AS)' \
 
        'CC=$(CC)' \
 
        'CXX=$(CXX)' \
 
        'DLLTOOL=$(DLLTOOL)' \
 
        'GCJ=$(GCJ)' \
 
        'GFORTRAN=$(GFORTRAN)' \
 
        'LD=$(LD)' \
 
        'LIPO=$(LIPO)' \
 
        'NM=$(NM)' \
 
        'OBJDUMP=$(OBJDUMP)' \
 
        'RANLIB=$(RANLIB)' \
 
        'STRIP=$(STRIP)' \
 
        'WINDRES=$(WINDRES)' \
 
        'WINDMC=$(WINDMC)'
 
 
 
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
 
 
 
# Flags that are concerned with the location of the X11 include files
 
# and library files
 
#
 
# NOTE: until the top-level is getting the values via autoconf, it only
 
# causes problems to have this top-level Makefile overriding the autoconf-set
 
# values in child directories.  Only variables that don't conflict with
 
# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
 
#
 
X11_FLAGS_TO_PASS = \
 
        'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
 
        'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
 
 
 
# Flags to pass to stage2 and later makes.
 
 
 
POSTSTAGE1_FLAGS_TO_PASS = \
 
        CC="$${CC}" CC_FOR_BUILD="$${CC_FOR_BUILD}" \
 
        CXX="$${CXX}" CXX_FOR_BUILD="$${CXX_FOR_BUILD}" \
 
        GNATBIND="$${GNATBIND}" \
 
        LDFLAGS="$${LDFLAGS}" \
 
        HOST_LIBS="$${HOST_LIBS}" \
 
        "`echo 'ADAFLAGS=$(BOOT_ADAFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"
 
 
 
# Flags to pass down to makes which are built with the target environment.
 
# The double $ decreases the length of the command line; those variables
 
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.  The
 
# *_CFLAGS_FOR_TARGET variables are not passed down and most often empty,
 
# so we expand them here.
 
EXTRA_TARGET_FLAGS = \
 
        'AR=$$(AR_FOR_TARGET)' \
 
        'AS=$(COMPILER_AS_FOR_TARGET)' \
 
        'CC=$$(CC_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
 
        'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
 
        'CXX=$$(CXX_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
 
        'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
 
        'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
 
        'GCJ=$$(GCJ_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
 
        'GFORTRAN=$$(GFORTRAN_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
 
        'LD=$(COMPILER_LD_FOR_TARGET)' \
 
        'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \
 
        'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
 
        'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
 
        'NM=$(COMPILER_NM_FOR_TARGET)' \
 
        'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \
 
        'RANLIB=$$(RANLIB_FOR_TARGET)' \
 
        'WINDRES=$$(WINDRES_FOR_TARGET)' \
 
        'WINDMC=$$(WINDMC_FOR_TARGET)' \
 
        'XGCC_FLAGS_FOR_TARGET=$(XGCC_FLAGS_FOR_TARGET)' \
 
        "TFLAGS=$$TFLAGS"
 
 
 
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
 
 
 
# Flags to pass down to gcc.  gcc builds a library, libgcc.a, so it
 
# unfortunately needs the native compiler and the target ar and
 
# ranlib.
 
# If any variables are added here, they must be added to do-*, below.
 
# The BUILD_* variables are a special case, which are used for the gcc
 
# cross-building scheme.
 
EXTRA_GCC_FLAGS = \
 
        "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
 
        "`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
 
        "`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
 
        "`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
 
        "`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
 
        "`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"
 
 
 
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS)
 
 
 
@if gcc
 
BUILD_CONFIG = @BUILD_CONFIG@
 
ifneq ($(BUILD_CONFIG),)
 
include $(foreach CONFIG, $(BUILD_CONFIG), $(srcdir)/config/$(CONFIG).mk)
 
endif
 
@endif gcc
 
 
 
.PHONY: configure-host
 
configure-host: [+
 
  FOR host_modules +] \
 
    maybe-configure-[+module+][+
 
  ENDFOR host_modules +]
 
.PHONY: configure-target
 
configure-target: [+
 
  FOR target_modules +] \
 
    maybe-configure-target-[+module+][+
 
  ENDFOR target_modules +]
 
 
 
# The target built for a native non-bootstrap build.
 
.PHONY: all
 
all:
 
@if gcc-bootstrap
 
        [ -f stage_final ] || echo stage3 > stage_final
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble
 
@endif gcc-bootstrap
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
@if gcc-bootstrap
 
        if [ -f stage_last ]; then \
 
          TFLAGS="$(STAGE$(shell test ! -f stage_last || sed s,^stage,, stage_last)_TFLAGS)"; \
 
          $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target; \
 
        else \
 
@endif gcc-bootstrap
 
          $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host all-target \
 
@if gcc-bootstrap
 
            ; \
 
        fi \
 
@endif gcc-bootstrap
 
        && :
 
 
 
.PHONY: all-build
 
[+ FOR build_modules +]
 
all-build: maybe-all-build-[+module+][+ ENDFOR build_modules +]
 
 
 
.PHONY: all-host
 
[+ FOR host_modules +][+ IF bootstrap +]
 
@if [+module+]-no-bootstrap[+ ENDIF bootstrap +]
 
all-host: maybe-all-[+module+][+ IF bootstrap +]
 
@endif [+module+]-no-bootstrap[+ ENDIF bootstrap +][+ ENDFOR host_modules +]
 
 
 
.PHONY: all-target
 
[+ FOR target_modules +][+ IF bootstrap +]
 
@if target-[+module+]-no-bootstrap[+ ENDIF bootstrap +]
 
all-target: maybe-all-target-[+module+][+ IF bootstrap +]
 
@endif target-[+module+]-no-bootstrap[+
 
  ENDIF bootstrap +][+ ENDFOR target_modules +]
 
 
 
# Do a target for all the subdirectories.  A ``make do-X'' will do a
 
# ``make X'' in all subdirectories (because, in general, there is a
 
# dependency (below) of X upon do-X, a ``make X'' will also do this,
 
# but it may do additional work as well).
 
[+ FOR recursive_targets +]
 
.PHONY: do-[+make_target+]
 
do-[+make_target+]:
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) [+make_target+]-host \
 
          [+make_target+]-target
 
 
 
 
 
.PHONY: [+make_target+]-host
 
[+ FOR host_modules +]
 
[+make_target+]-host: maybe-[+make_target+]-[+module+][+ ENDFOR host_modules +]
 
 
 
.PHONY: [+make_target+]-target
 
[+ FOR target_modules +]
 
[+make_target+]-target: maybe-[+make_target+]-target-[+module+][+ ENDFOR target_modules +]
 
[+ ENDFOR recursive_targets +]
 
 
 
# Here are the targets which correspond to the do-X targets.
 
 
 
.PHONY: info installcheck dvi pdf html
 
.PHONY: install-info install-pdf install-html
 
.PHONY: clean distclean mostlyclean maintainer-clean realclean
 
.PHONY: local-clean local-distclean local-maintainer-clean
 
info: do-info
 
installcheck: do-installcheck
 
dvi: do-dvi
 
pdf: do-pdf
 
html: do-html
 
 
 
# Make sure makeinfo is built before we do a `make info', if we're
 
# in fact building texinfo.
 
do-info: maybe-all-texinfo
 
 
 
install-info: do-install-info dir.info
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        if [ -f dir.info ] ; then \
 
          $(INSTALL_DATA) dir.info $(DESTDIR)$(infodir)/dir.info ; \
 
        else true ; fi
 
 
 
install-pdf: do-install-pdf
 
 
 
install-html: do-install-html
 
 
 
local-clean:
 
        -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
 
 
 
local-distclean:
 
        -rm -f Makefile config.status config.cache mh-frag mt-frag
 
        -rm -f maybedep.tmp serdep.tmp
 
        -if [ "$(TARGET_SUBDIR)" != "." ]; then \
 
          rm -rf $(TARGET_SUBDIR); \
 
        else true; fi
 
        -rm -rf $(BUILD_SUBDIR)
 
        -if [ "$(HOST_SUBDIR)" != "." ]; then \
 
          rm -rf $(HOST_SUBDIR); \
 
        else true; fi
 
        -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
 
        -rm -f texinfo/doc/Makefile texinfo/po/POTFILES
 
        -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
 
        -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
 
        -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
 
        -find . -name config.cache -exec rm -f {} \; \; 2>/dev/null
 
 
 
local-maintainer-clean:
 
        @echo "This command is intended for maintainers to use;"
 
        @echo "it deletes files that may require special tools to rebuild."
 
 
 
clean: do-clean local-clean
 
mostlyclean: do-mostlyclean local-clean
 
distclean: do-distclean local-clean local-distclean
 
maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
 
maintainer-clean: local-distclean
 
realclean: maintainer-clean
 
 
 
# Check target.
 
 
 
.PHONY: check do-check
 
check: do-check
 
 
 
# Only include modules actually being configured and built.
 
.PHONY: check-host
 
check-host: [+
 
  FOR host_modules +] \
 
    maybe-check-[+module+][+
 
  ENDFOR host_modules +]
 
 
 
.PHONY: check-target
 
check-target: [+
 
  FOR target_modules +] \
 
    maybe-check-target-[+module+][+
 
  ENDFOR target_modules +]
 
 
 
do-check:
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) check-host check-target
 
 
 
# Automated reporting of test results.
 
 
 
warning.log: build.log
 
        $(srcdir)/contrib/warn_summary build.log > $@
 
 
 
mail-report.log:
 
        if test x'$(BOOT_CFLAGS)' != x''; then \
 
            BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
 
        fi; \
 
        $(srcdir)/contrib/test_summary -t >$@
 
        chmod +x $@
 
        echo If you really want to send e-mail, run ./$@ now
 
 
 
mail-report-with-warnings.log: warning.log
 
        if test x'$(BOOT_CFLAGS)' != x''; then \
 
            BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
 
        fi; \
 
        $(srcdir)/contrib/test_summary -t -i warning.log >$@
 
        chmod +x $@
 
        echo If you really want to send e-mail, run ./$@ now
 
 
 
# Installation targets.
 
 
 
.PHONY: install uninstall
 
install:
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) installdirs install-host install-target
 
 
 
.PHONY: install-host-nogcc
 
install-host-nogcc: [+
 
  FOR host_modules +][+ IF (not (= (get "module") "gcc")) +] \
 
    maybe-install-[+module+][+ ENDIF +][+
 
  ENDFOR host_modules +]
 
 
 
.PHONY: install-host
 
install-host: [+
 
  FOR host_modules +] \
 
    maybe-install-[+module+][+
 
  ENDFOR host_modules +]
 
 
 
.PHONY: install-target
 
install-target: [+
 
  FOR target_modules +] \
 
    maybe-install-target-[+module+][+
 
  ENDFOR target_modules +]
 
 
 
uninstall:
 
        @echo "the uninstall target is not supported in this tree"
 
 
 
.PHONY: install.all
 
install.all: install-no-fixedincludes
 
        @if [ -f ./gcc/Makefile ] ; then \
 
                r=`${PWD_COMMAND}` ; export r ; \
 
                s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
                $(HOST_EXPORTS) \
 
                (cd ./gcc && \
 
                $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
 
        else \
 
                true ; \
 
        fi
 
 
 
# install-no-fixedincludes is used because Cygnus can not distribute
 
# the fixed header files.
 
.PHONY: install-no-fixedincludes
 
install-no-fixedincludes: installdirs install-host-nogcc \
 
        install-target gcc-no-fixedincludes
 
 
 
### other supporting targets
 
 
 
MAKEDIRS= \
 
        $(DESTDIR)$(prefix) \
 
        $(DESTDIR)$(exec_prefix)
 
.PHONY: installdirs
 
installdirs: mkinstalldirs
 
        $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
 
 
 
dir.info: do-install-info
 
        if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
 
          $(srcdir)/texinfo/gen-info-dir $(DESTDIR)$(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
 
          mv -f dir.info.new dir.info ; \
 
        else true ; \
 
        fi
 
 
 
dist:
 
        @echo "Building a full distribution of this tree isn't done"
 
        @echo "via 'make dist'.  Check out the etc/ subdirectory"
 
 
 
etags tags: TAGS
 
 
 
# Right now this just builds TAGS in each subdirectory.  emacs19 has the
 
# ability to use several tags files at once, so there is probably no need
 
# to combine them into one big TAGS file (like CVS 1.3 does).  We could
 
# (if we felt like it) have this Makefile write a piece of elisp which
 
# the user could load to tell emacs19 where all the TAGS files we just
 
# built are.
 
TAGS: do-TAGS
 
 
 
# ------------------------------------
 
# Macros for configure and all targets
 
# ------------------------------------
 
 
 
[+ DEFINE configure +]
 
.PHONY: configure-[+prefix+][+module+] maybe-configure-[+prefix+][+module+]
 
maybe-configure-[+prefix+][+module+]:
 
@if gcc-bootstrap
 
configure-[+prefix+][+module+]: stage_current
 
@endif gcc-bootstrap
 
@if [+prefix+][+module+]
 
maybe-configure-[+prefix+][+module+]: configure-[+prefix+][+module+]
 
configure-[+prefix+][+module+]: [+ IF bootstrap +][+ ELSE +]
 
        @: $(MAKE); $(unstage)[+ ENDIF bootstrap +]
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        [+ IF check_multilibs
 
        +]echo "Checking multilib configuration for [+module+]..."; \
 
        $(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+] ; \
 
        $(CC_FOR_TARGET) --print-multi-lib > [+subdir+]/[+module+]/multilib.tmp 2> /dev/null ; \
 
        if test -r [+subdir+]/[+module+]/multilib.out; then \
 
          if cmp -s [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; then \
 
            rm -f [+subdir+]/[+module+]/multilib.tmp; \
 
          else \
 
            rm -f [+subdir+]/[+module+]/Makefile; \
 
            mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
 
          fi; \
 
        else \
 
          mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
 
        fi; \
 
        [+ ENDIF check_multilibs +]test ! -f [+subdir+]/[+module+]/Makefile || exit 0; \
 
        $(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+] ; \
 
        [+exports+] [+extra_exports+] \
 
        echo Configuring in [+subdir+]/[+module+]; \
 
        cd "[+subdir+]/[+module+]" || exit 1; \
 
        case $(srcdir) in \
 
          /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
 
          *) topdir=`echo [+subdir+]/[+module+]/ | \
 
                sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
 
        esac; \
 
        srcdiroption="--srcdir=$${topdir}/[+module+]"; \
 
        libsrcdir="$$s/[+module+]"; \
 
        [+ IF no-config-site +]rm -f no-such-file || : ; \
 
        CONFIG_SITE=no-such-file [+ ENDIF +]$(SHELL) $${libsrcdir}/configure \
 
          [+args+] --build=${build_alias} --host=[+host_alias+] \
 
          --target=[+target_alias+] $${srcdiroption} [+extra_configure_flags+] \
 
          || exit 1
 
@endif [+prefix+][+module+]
 
 
 
[+ IF bootstrap +]
 
[+ FOR bootstrap_stage +]
 
.PHONY: configure-stage[+id+]-[+prefix+][+module+] maybe-configure-stage[+id+]-[+prefix+][+module+]
 
maybe-configure-stage[+id+]-[+prefix+][+module+]:
 
@if [+prefix+][+module+]-bootstrap
 
maybe-configure-stage[+id+]-[+prefix+][+module+]: configure-stage[+id+]-[+prefix+][+module+]
 
configure-stage[+id+]-[+prefix+][+module+]:
 
        @[ $(current_stage) = stage[+id+] ] || $(MAKE) stage[+id+]-start
 
        @$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+]
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
 
        [+ IF check_multilibs
 
        +]echo "Checking multilib configuration for [+module+]..."; \
 
        $(CC_FOR_TARGET) --print-multi-lib > [+subdir+]/[+module+]/multilib.tmp 2> /dev/null ; \
 
        if test -r [+subdir+]/[+module+]/multilib.out; then \
 
          if cmp -s [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; then \
 
            rm -f [+subdir+]/[+module+]/multilib.tmp; \
 
          else \
 
            rm -f [+subdir+]/[+module+]/Makefile; \
 
            mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
 
          fi; \
 
        else \
 
          mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
 
        fi; \
 
        [+ ENDIF check_multilibs +]test ! -f [+subdir+]/[+module+]/Makefile || exit 0; \
 
        [+exports+][+ IF prev +] \
 
        [+poststage1_exports+][+ ENDIF prev +][+ IF prefix +] \
 
        CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
 
        CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
 
        LIBCFLAGS="$(LIBCFLAGS_FOR_TARGET)"; export LIBCFLAGS;[+ ELSE prefix +] \
 
        CFLAGS="$(STAGE[+id+]_CFLAGS)"; export CFLAGS; \
 
        CXXFLAGS="$(STAGE[+id+]_CXXFLAGS)"; export CXXFLAGS;[+ IF prev +] \
 
        LIBCFLAGS="$(STAGE[+id+]_CFLAGS)"[+ ELSE prev +] \
 
        LIBCFLAGS="$(LIBCFLAGS)"[+ ENDIF prev +]; export LIBCFLAGS;[+
 
  ENDIF prefix +] [+extra_exports+] \
 
        echo Configuring stage [+id+] in [+subdir+]/[+module+] ; \
 
        $(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+] ; \
 
        cd [+subdir+]/[+module+] || exit 1; \
 
        case $(srcdir) in \
 
          /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
 
          *) topdir=`echo [+subdir+]/[+module+]/ | \
 
                sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
 
        esac; \
 
        srcdiroption="--srcdir=$${topdir}/[+module+]"; \
 
        libsrcdir="$$s/[+module+]"; \
 
        $(SHELL) $${libsrcdir}/configure \
 
          [+args+] --build=${build_alias} --host=[+host_alias+] \
 
          --target=[+target_alias+] $${srcdiroption} [+ IF prev +]\
 
          --with-build-libsubdir=$(HOST_SUBDIR) [+ ENDIF prev +]\
 
          $(STAGE[+id+]_CONFIGURE_FLAGS)[+ IF extra_configure_flags +] \
 
          [+extra_configure_flags+][+ ENDIF extra_configure_flags +]
 
@endif [+prefix+][+module+]-bootstrap
 
[+ ENDFOR bootstrap_stage +]
 
[+ ENDIF bootstrap +]
 
[+ ENDDEF +]
 
 
 
[+ DEFINE all +]
 
.PHONY: all-[+prefix+][+module+] maybe-all-[+prefix+][+module+]
 
maybe-all-[+prefix+][+module+]:
 
@if gcc-bootstrap
 
all-[+prefix+][+module+]: stage_current
 
@endif gcc-bootstrap
 
@if [+prefix+][+module+]
 
TARGET-[+prefix+][+module+]=[+
 
  IF all_target +][+all_target+][+ ELSE +]all[+ ENDIF all_target +]
 
maybe-all-[+prefix+][+module+]: all-[+prefix+][+module+]
 
all-[+prefix+][+module+]: configure-[+prefix+][+module+][+ IF bootstrap +][+ ELSE +]
 
        @: $(MAKE); $(unstage)[+ ENDIF bootstrap +]
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        [+exports+] [+extra_exports+] \
 
        (cd [+subdir+]/[+module+] && \
 
          $(MAKE) $(BASE_FLAGS_TO_PASS) [+args+] [+extra_make_flags+] \
 
                $(TARGET-[+prefix+][+module+]))
 
@endif [+prefix+][+module+]
 
 
 
[+ IF bootstrap +]
 
[+ FOR bootstrap_stage +]
 
.PHONY: all-stage[+id+]-[+prefix+][+module+] maybe-all-stage[+id+]-[+prefix+][+module+]
 
.PHONY: clean-stage[+id+]-[+prefix+][+module+] maybe-clean-stage[+id+]-[+prefix+][+module+]
 
maybe-all-stage[+id+]-[+prefix+][+module+]:
 
maybe-clean-stage[+id+]-[+prefix+][+module+]:
 
@if [+prefix+][+module+]-bootstrap
 
maybe-all-stage[+id+]-[+prefix+][+module+]: all-stage[+id+]-[+prefix+][+module+]
 
all-stage[+id+]: all-stage[+id+]-[+prefix+][+module+]
 
TARGET-stage[+id+]-[+prefix+][+module+] = $(TARGET-[+prefix+][+module+])
 
all-stage[+id+]-[+prefix+][+module+]: configure-stage[+id+]-[+prefix+][+module+]
 
        @[ $(current_stage) = stage[+id+] ] || $(MAKE) stage[+id+]-start
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
 
        [+exports+][+ IF prev +] \
 
        [+poststage1_exports+][+ ENDIF prev +] [+extra_exports+] \
 
        cd [+subdir+]/[+module+] && \
 
        $(MAKE) $(BASE_FLAGS_TO_PASS)[+ IF prefix +] \
 
                CFLAGS="$(CFLAGS_FOR_TARGET)" \
 
                CXXFLAGS="$(CXXFLAGS_FOR_TARGET)" \
 
                LIBCFLAGS="$(LIBCFLAGS_FOR_TARGET)"[+ ELSE prefix +] \
 
                CFLAGS="$(STAGE[+id+]_CFLAGS)" \
 
                CXXFLAGS="$(STAGE[+id+]_CXXFLAGS)"[+ IF prev +] \
 
                LIBCFLAGS="$(STAGE[+id+]_CFLAGS)"[+ ELSE prev +] \
 
                LIBCFLAGS="$(LIBCFLAGS)"[+ ENDIF prev +][+ ENDIF prefix +] \
 
                CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
 
                CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
 
                LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
 
                [+args+] [+
 
                IF prev +][+poststage1_args+][+ ENDIF prev
 
                +] [+extra_make_flags+] \
 
                TFLAGS="$(STAGE[+id+]_TFLAGS)" \
 
                $(TARGET-stage[+id+]-[+prefix+][+module+])
 
 
 
maybe-clean-stage[+id+]-[+prefix+][+module+]: clean-stage[+id+]-[+prefix+][+module+]
 
clean-stage[+id+]: clean-stage[+id+]-[+prefix+][+module+]
 
clean-stage[+id+]-[+prefix+][+module+]:
 
        @if [ $(current_stage) = stage[+id+] ]; then \
 
          [ -f [+subdir+]/[+module+]/Makefile ] || exit 0; \
 
        else \
 
          [ -f [+subdir+]/stage[+id+]-[+module+]/Makefile ] || exit 0; \
 
          $(MAKE) stage[+id+]-start; \
 
        fi; \
 
        cd [+subdir+]/[+module+] && \
 
        $(MAKE) [+args+] [+ IF prev +] \
 
                [+poststage1_args+] [+ ENDIF prev +] \
 
                [+extra_make_flags+] clean
 
@endif [+prefix+][+module+]-bootstrap
 
 
 
[+ ENDFOR bootstrap_stage +]
 
[+ ENDIF bootstrap +]
 
[+ ENDDEF +]
 
 
 
# --------------------------------------
 
# Modules which run on the build machine
 
# --------------------------------------
 
[+ FOR build_modules +]
 
[+ configure prefix="build-" subdir="$(BUILD_SUBDIR)" exports="$(BUILD_EXPORTS)"
 
             host_alias=(get "host" "${build_alias}")
 
             target_alias=(get "target" "${target_alias}")
 
             args="$(BUILD_CONFIGARGS)" no-config-site=true +]
 
 
 
[+ all prefix="build-" subdir="$(BUILD_SUBDIR)" exports="$(BUILD_EXPORTS)"
 
             args="$(EXTRA_BUILD_FLAGS)" +]
 
[+ ENDFOR build_module +]
 
 
 
# --------------------------------------
 
# Modules which run on the host machine
 
# --------------------------------------
 
[+ FOR host_modules +]
 
[+ configure prefix="" subdir="$(HOST_SUBDIR)"
 
             exports="$(HOST_EXPORTS)"
 
             poststage1_exports="$(POSTSTAGE1_HOST_EXPORTS)"
 
             host_alias=(get "host" "${host_alias}")
 
             target_alias=(get "target" "${target_alias}")
 
             args="$(HOST_CONFIGARGS)" +]
 
 
 
[+ all prefix="" subdir="$(HOST_SUBDIR)"
 
       exports="$(HOST_EXPORTS)"
 
       poststage1_exports="$(POSTSTAGE1_HOST_EXPORTS)"
 
       args="$(EXTRA_HOST_FLAGS)"
 
       poststage1_args="$(POSTSTAGE1_FLAGS_TO_PASS)" +]
 
 
 
.PHONY: check-[+module+] maybe-check-[+module+]
 
maybe-check-[+module+]:
 
@if [+module+]
 
maybe-check-[+module+]: check-[+module+]
 
[+ IF no_check +]
 
check-[+module+]:
 
[+ ELIF no_check_cross +]
 
# This module is only tested in a native toolchain.
 
check-[+module+]:
 
        @: $(MAKE); $(unstage)
 
        @if [ '$(host)' = '$(target)' ] ; then \
 
          r=`${PWD_COMMAND}`; export r; \
 
          s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
          $(HOST_EXPORTS) \
 
          (cd $(HOST_SUBDIR)/[+module+] && \
 
            $(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] check); \
 
        fi
 
[+ ELSE check +]
 
check-[+module+]:
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(HOST_EXPORTS) \
 
        (cd $(HOST_SUBDIR)/[+module+] && \
 
          $(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] check)
 
[+ ENDIF no_check +]
 
@endif [+module+]
 
 
 
.PHONY: install-[+module+] maybe-install-[+module+]
 
maybe-install-[+module+]:
 
@if [+module+]
 
maybe-install-[+module+]: install-[+module+]
 
[+ IF no_install +]
 
install-[+module+]:
 
[+ ELSE install +]
 
install-[+module+]: installdirs
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(HOST_EXPORTS) \
 
        (cd $(HOST_SUBDIR)/[+module+] && \
 
          $(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] install)
 
[+ ENDIF no_install +]
 
@endif [+module+]
 
 
 
# Other targets (info, dvi, pdf, etc.)
 
[+ FOR recursive_targets +]
 
.PHONY: maybe-[+make_target+]-[+module+] [+make_target+]-[+module+]
 
maybe-[+make_target+]-[+module+]:
 
@if [+module+]
 
maybe-[+make_target+]-[+module+]: [+make_target+]-[+module+]
 
[+ IF (match-value? = "missing" (get "make_target") ) +]
 
# [+module+] doesn't support [+make_target+].
 
[+make_target+]-[+module+]:
 
[+ ELSE +]
 
[+make_target+]-[+module+]: [+
 
  FOR depend +]\
 
    [+depend+]-[+module+] [+
 
  ENDFOR depend +]
 
        @[+ IF bootstrap +][+ ELSE +]: $(MAKE); $(unstage)
 
        @[+ ENDIF bootstrap +][ -f ./[+module+]/Makefile ] || exit 0; \
 
        r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(HOST_EXPORTS) \
 
        for flag in $(EXTRA_HOST_FLAGS) [+extra_make_flags+]; do \
 
          eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
 
        done; \
 
        echo "Doing [+make_target+] in [+module+]" ; \
 
        (cd $(HOST_SUBDIR)/[+module+] && \
 
          $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 
                  "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
 
                  "RANLIB=$${RANLIB}" \
 
                  "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
 
                  [+make_target+]) \
 
          || exit 1
 
[+ ENDIF +]
 
@endif [+module+]
 
[+ ENDFOR recursive_targets +]
 
[+ ENDFOR host_modules +]
 
 
 
# ---------------------------------------
 
# Modules which run on the target machine
 
# ---------------------------------------
 
[+ FOR target_modules +]
 
 
 
[+ IF raw_cxx +]
 
[+ configure prefix="target-" subdir="$(TARGET_SUBDIR)"
 
             check_multilibs=true
 
             exports="$(RAW_CXX_TARGET_EXPORTS)"
 
             host_alias=(get "host" "${target_alias}")
 
             target_alias=(get "target" "${target_alias}")
 
             args="$(TARGET_CONFIGARGS)" no-config-site=true +]
 
 
 
[+ all prefix="target-" subdir="$(TARGET_SUBDIR)"
 
       exports="$(RAW_CXX_TARGET_EXPORTS)"
 
       args="$(EXTRA_TARGET_FLAGS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)'" +]
 
[+ ELSE +]
 
[+ configure prefix="target-" subdir="$(TARGET_SUBDIR)"
 
             check_multilibs=true
 
             exports="$(NORMAL_TARGET_EXPORTS)"
 
             host_alias=(get "host" "${target_alias}")
 
             target_alias=(get "target" "${target_alias}")
 
             args="$(TARGET_CONFIGARGS)" no-config-site=true +]
 
 
 
[+ all prefix="target-" subdir="$(TARGET_SUBDIR)"
 
       exports="$(NORMAL_TARGET_EXPORTS)"
 
       args="$(EXTRA_TARGET_FLAGS)" +]
 
[+ ENDIF +]
 
 
 
.PHONY: check-target-[+module+] maybe-check-target-[+module+]
 
maybe-check-target-[+module+]:
 
@if target-[+module+]
 
maybe-check-target-[+module+]: check-target-[+module+]
 
[+ IF no_check +]
 
# Dummy target for uncheckable module.
 
check-target-[+module+]:
 
[+ ELSE check +]
 
check-target-[+module+]:
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
 
IF raw_cxx +]
 
        $(RAW_CXX_TARGET_EXPORTS) \[+
 
ELSE normal_cxx +]
 
        $(NORMAL_TARGET_EXPORTS) \[+
 
ENDIF raw_cxx +]
 
        (cd $(TARGET_SUBDIR)/[+module+] && \
 
          $(MAKE) $(TARGET_FLAGS_TO_PASS) [+
 
            IF raw_cxx
 
              +] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
 
            ENDIF raw_cxx
 
          +] [+extra_make_flags+] check)
 
[+ ENDIF no_check +]
 
@endif target-[+module+]
 
 
 
.PHONY: install-target-[+module+] maybe-install-target-[+module+]
 
maybe-install-target-[+module+]:
 
@if target-[+module+]
 
maybe-install-target-[+module+]: install-target-[+module+]
 
[+ IF no_install +]
 
# Dummy target for uninstallable.
 
install-target-[+module+]:
 
[+ ELSE install +]
 
install-target-[+module+]: installdirs
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
 
IF raw_cxx +]
 
        $(RAW_CXX_TARGET_EXPORTS) \[+
 
ELSE normal_cxx +]
 
        $(NORMAL_TARGET_EXPORTS) \[+
 
ENDIF raw_cxx +]
 
        (cd $(TARGET_SUBDIR)/[+module+] && \
 
          $(MAKE) $(TARGET_FLAGS_TO_PASS) [+extra_make_flags+] install)
 
[+ ENDIF no_install +]
 
@endif target-[+module+]
 
 
 
# Other targets (info, dvi, pdf, etc.)
 
[+ FOR recursive_targets +]
 
.PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+]
 
maybe-[+make_target+]-target-[+module+]:
 
@if target-[+module+]
 
maybe-[+make_target+]-target-[+module+]: [+make_target+]-target-[+module+]
 
[+ IF (match-value? = "missing" (get "make_target") ) +]
 
# [+module+] doesn't support [+make_target+].
 
[+make_target+]-target-[+module+]:
 
[+ ELSE +]
 
[+make_target+]-target-[+module+]: [+
 
  FOR depend +]\
 
    [+depend+]-target-[+module+] [+
 
  ENDFOR depend +]
 
        @: $(MAKE); $(unstage)
 
        @[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0 ; \
 
        r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
 
IF raw_cxx +]
 
        $(RAW_CXX_TARGET_EXPORTS) \[+
 
ELSE normal_cxx +]
 
        $(NORMAL_TARGET_EXPORTS) \[+
 
ENDIF raw_cxx +]
 
        echo "Doing [+make_target+] in $(TARGET_SUBDIR)/[+module+]" ; \
 
        for flag in $(EXTRA_TARGET_FLAGS); do \
 
          eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
 
        done; \
 
        (cd $(TARGET_SUBDIR)/[+module+] && \
 
          $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 
                  "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
 
                  "RANLIB=$${RANLIB}" \
 
                  "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
 
                  [+extra_make_flags+] [+make_target+]) \
 
          || exit 1
 
[+ ENDIF +]
 
@endif target-[+module+]
 
[+ ENDFOR recursive_targets +]
 
[+ ENDFOR target_modules +]
 
 
 
# ----------
 
# GCC module
 
# ----------
 
 
 
@if gcc-no-bootstrap
 
.PHONY: cross
 
cross: all-build all-gas all-ld
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(HOST_EXPORTS) \
 
        echo "Building the C and C++ compiler"; \
 
        cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
 
        echo "Building runtime libraries"; \
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) LANGUAGES="c c++" all
 
@endif gcc-no-bootstrap
 
 
 
@if gcc
 
[+ FOR languages +]
 
.PHONY: check-gcc-[+language+] check-[+language+]
 
check-gcc-[+language+]:
 
        r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(HOST_EXPORTS) \
 
        (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) [+gcc-check-target+]);
 
check-[+language+]: check-gcc-[+language+][+ IF lib-check-target +] [+ lib-check-target +][+ ENDIF lib-check-target +]
 
[+ ENDFOR languages +]
 
 
 
# Install the gcc headers files, but not the fixed include files,
 
# which Cygnus is not allowed to distribute.  This rule is very
 
# dependent on the workings of the gcc Makefile.in.
 
.PHONY: gcc-no-fixedincludes
 
gcc-no-fixedincludes:
 
        @if [ -f ./gcc/Makefile ]; then \
 
          rm -rf gcc/tmp-include; \
 
          mv gcc/include gcc/tmp-include 2>/dev/null; \
 
          mkdir gcc/include; \
 
          cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
 
          touch gcc/stmp-fixinc gcc/include/fixed; \
 
          rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
 
          r=`${PWD_COMMAND}`; export r; \
 
          s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
 
          $(HOST_EXPORTS) \
 
          (cd ./gcc && \
 
           $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 
          rm -rf gcc/include; \
 
          mv gcc/tmp-include gcc/include 2>/dev/null; \
 
        else true; fi
 
@endif gcc
 
 
 
# ---------------------
 
# GCC bootstrap support
 
# ---------------------
 
 
 
# We track the current stage (the one in 'gcc') in the stage_current file.
 
# stage_last instead tracks the stage that was built last.  These targets
 
# are dummy when toplevel bootstrap is not active.
 
 
 
# While making host and target tools, symlinks to the final stage must be
 
# there, so $(unstage) should be run at various points.  To avoid excessive
 
# recursive invocations of make, we "inline" them using a variable.  These
 
# must be referenced as ": $(MAKE) ; $(unstage)" rather than "$(unstage)"
 
# to avoid warnings from the GNU Make job server.
 
 
 
unstage = :
 
stage = :
 
current_stage = ""
 
 
 
@if gcc-bootstrap
 
unstage = if [ -f stage_last ]; then [ -f stage_current ] || $(MAKE) `cat stage_last`-start || exit 1; else :; fi
 
stage = if [ -f stage_current ]; then $(MAKE) `cat stage_current`-end || exit 1; else :; fi
 
current_stage = "`cat stage_current 2> /dev/null`"
 
@endif gcc-bootstrap
 
 
 
.PHONY: unstage stage
 
unstage:
 
        @: $(MAKE); $(unstage)
 
stage:
 
        @: $(MAKE); $(stage)
 
 
 
# Disable commands for lean bootstrap.
 
LEAN = false
 
 
 
# We name the build directories for the various stages "stage1-gcc",
 
# "stage2-gcc","stage3-gcc", etc.
 
 
 
# Since the 'compare' process will fail (on debugging information) if any
 
# directory names are different, we need to link the gcc directory for
 
# the previous stage to a constant name ('prev-gcc'), and to make the name of
 
# the build directories constant as well. For the latter, we use naked names
 
# like 'gcc', because the scripts in that directory assume it.  We use
 
# mv on platforms where symlinks to directories do not work or are not
 
# reliable.
 
 
 
# 'touch' doesn't work right on some platforms.
 
STAMP = echo timestamp >
 
 
 
# We only want to compare .o files, so set this!
 
objext = .o
 
 
 
[+ FOR bootstrap-stage +]
 
.PHONY: stage[+id+]-start stage[+id+]-end
 
 
 
stage[+id+]-start::
 
        @: $(MAKE); $(stage); \
 
        echo stage[+id+] > stage_current ; \
 
        echo stage[+id+] > stage_last; \
 
        $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)[+
 
   FOR host_modules +][+ IF bootstrap +]
 
@if [+ module +]
 
        @cd $(HOST_SUBDIR); [ -d stage[+id+]-[+module+] ] || \
 
          mkdir stage[+id+]-[+module+]; \
 
        mv stage[+id+]-[+module+] [+module+] [+ IF prev +] ; \
 
        mv stage[+prev+]-[+module+] prev-[+module+] || test -f stage[+prev+]-lean [+ ENDIF prev +]
 
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
 
        @[ -d stage[+id+]-$(TARGET_SUBDIR) ] || \
 
          mkdir stage[+id+]-$(TARGET_SUBDIR); \
 
        mv stage[+id+]-$(TARGET_SUBDIR) $(TARGET_SUBDIR) [+ IF prev +] ; \
 
        mv stage[+prev+]-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage[+prev+]-lean [+ ENDIF prev +]
 
 
 
stage[+id+]-end:: [+ FOR host_modules +][+ IF bootstrap +]
 
@if [+ module +]
 
        @if test -d $(HOST_SUBDIR)/[+module+] ; then \
 
          cd $(HOST_SUBDIR); mv [+module+] stage[+id+]-[+module+] [+ IF prev +]; \
 
          mv prev-[+module+] stage[+prev+]-[+module+] ; : [+ ENDIF prev +] ; \
 
        fi
 
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
 
        @if test -d $(TARGET_SUBDIR) ; then \
 
          mv $(TARGET_SUBDIR) stage[+id+]-$(TARGET_SUBDIR) [+ IF prev +] ; \
 
          mv prev-$(TARGET_SUBDIR) stage[+prev+]-$(TARGET_SUBDIR) ; : [+ ENDIF prev +] ; \
 
        fi
 
        rm -f stage_current
 
 
 
# Bubble a bug fix through all the stages up to stage [+id+].  They are
 
# remade, but not reconfigured.  The next stage (if any) will not be
 
# reconfigured either.
 
.PHONY: stage[+id+]-bubble
 
stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +]
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        if test -f stage[+id+]-lean [+
 
          IF prev +]|| test -f stage[+prev+]-lean [+ ENDIF prev +] ; then \
 
          echo Skipping rebuild of stage[+id+] ; \
 
        else \
 
          $(MAKE) stage[+id+]-start; \[+IF lean +]
 
          if $(LEAN); then \
 
            rm -rf stage[+lean+]-* ; \
 
            $(STAMP) stage[+lean+]-lean ; \
 
          fi; \[+ ENDIF lean +]
 
          $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]; \
 
        fi[+ IF compare-target +]
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) [+compare-target+][+ ENDIF compare-target +]
 
 
 
.PHONY: all-stage[+id+] clean-stage[+id+]
 
do-clean: clean-stage[+id+]
 
 
 
# FIXME: Will not need to be conditional when toplevel bootstrap is the
 
# only possibility, but now it conflicts with no-bootstrap rules
 
@if gcc-bootstrap
 
[+ IF compare-target +]
 
[+compare-target+]:
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        if test -f stage[+prev+]-lean; then \
 
          echo Cannot compare object files as stage [+prev+] was deleted. ; \
 
          exit 0 ; \
 
        fi; \
 
        : $(MAKE); $(stage); \
 
        rm -f .bad_compare ; \
 
        echo Comparing stages [+prev+] and [+id+] ; \
 
        sed=`echo stage[+id+] | sed 's,^stage,,;s,.,.,g'`; \
 
        files=`find stage[+id+]-* -name "*$(objext)" -print | \
 
                 sed -n s,^stage$$sed-,,p` ; \
 
        for file in $${files} ; do \
 
          f1=$$r/stage[+prev+]-$$file; f2=$$r/stage[+id+]-$$file; \
 
          if test ! -f $$f1; then continue; fi; \
 
          $(do-[+compare-target+]) > /dev/null 2>&1; \
 
          if test $$? -eq 1; then \
 
            case $$file in \
 
              @compare_exclusions@) \
 
                echo warning: $$file differs ;; \
 
              *) \
 
                echo $$file differs >> .bad_compare ;; \
 
            esac ; \
 
          fi ; \
 
        done ; \
 
        if [ -f .bad_compare ]; then \
 
          echo "Bootstrap comparison failure!"; \
 
          cat .bad_compare; \
 
          exit 1; \
 
        else \
 
          echo Comparison successful.; \
 
        fi ; \
 
        $(STAMP) [+compare-target+][+ IF prev +]
 
        if $(LEAN); then \
 
          rm -rf stage[+prev+]-*; \
 
          $(STAMP) stage[+prev+]-lean; \
 
        fi[+ ENDIF prev +]
 
[+ ENDIF compare-target +]
 
 
 
[+ IF bootstrap-target +]
 
.PHONY: [+bootstrap-target+] [+bootstrap-target+]-lean
 
[+bootstrap-target+]:
 
        echo stage[+id+] > stage_final
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
 
        $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
 
 
 
[+bootstrap-target+]-lean:
 
        echo stage[+id+] > stage_final
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage[+id+]-bubble
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
 
        $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
 
[+ ENDIF bootstrap-target +]
 
 
 
# Rules to wipe a stage and all the following ones, also used for cleanstrap
 
[+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +]
 
.PHONY: distclean-stage[+id+]
 
distclean-stage[+id+]::
 
        @: $(MAKE); $(stage)
 
        @test "`cat stage_last`" != stage[+id+] || rm -f stage_last
 
        rm -rf stage[+id+]-* [+
 
          IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
 
 
 
[+ IF cleanstrap-target +]
 
.PHONY: [+cleanstrap-target+]
 
[+cleanstrap-target+]: do-distclean local-clean
 
        echo stage[+id+] > stage_final
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble
 
        @: $(MAKE); $(unstage)
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
 
        $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
 
[+ ENDIF cleanstrap-target +]
 
@endif gcc-bootstrap
 
 
 
[+ ENDFOR bootstrap-stage +]
 
 
 
stageprofile-end::
 
        $(MAKE) distclean-stagefeedback
 
 
 
stagefeedback-start::
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        for i in prev-*; do \
 
          j=`echo $$i | sed s/^prev-//` ; \
 
          cd $$r/$$i && \
 
          { find . -type d | sort | sed 's,.*,$(SHELL) '"$$s"'/mkinstalldirs "../'$$j'/&",' | $(SHELL) ; } && \
 
          { find . -name '*.*da' | sed 's,.*,$(LN) -f "&" "../'$$j'/&",' | $(SHELL) ; } ; \
 
        done
 
 
 
@if gcc-bootstrap
 
do-distclean: distclean-stage1
 
 
 
# Provide a GCC build when we're building target libraries.  This does
 
# not work as a dependency, just as the minimum necessary to avoid errors.
 
stage_last:
 
        @r=`${PWD_COMMAND}`; export r; \
 
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 
        $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage1-bubble
 
 
 
# Same as unstage, but not phony and defaulting to stage1-start.  We place
 
# it in the dependency so that for example `make -j3 all-gcc' works.
 
stage_current:
 
        @if test -f stage_last; then $(unstage); else $(MAKE) stage1-start; fi
 
 
 
.PHONY: restrap
 
restrap::
 
        @: $(MAKE); $(stage)
 
        rm -rf stage1-$(TARGET_SUBDIR)[+ FOR bootstrap-stage +][+ IF prev
 
          +] stage[+id+]-*[+ ENDIF prev +][+ ENDFOR bootstrap-stage +]
 
restrap:: all
 
@endif gcc-bootstrap
 
 
 
# --------------------------------------
 
# Dependencies between different modules
 
# --------------------------------------
 
 
 
# Generic dependencies for target modules on host stuff, especially gcc
 
@if gcc-bootstrap[+ FOR target_modules +][+ IF bootstrap
 
  +][+ FOR bootstrap_stage +]
 
configure-stage[+id+]-target-[+module+]: maybe-all-stage[+id+]-gcc[+
 
  ENDFOR +][+ ELSE bootstrap +]
 
configure-target-[+module+]: stage_last[+
 
  ENDIF bootstrap +][+ ENDFOR target_modules +]
 
@endif gcc-bootstrap
 
 
 
@if gcc-no-bootstrap[+ FOR target_modules +]
 
configure-target-[+module+]: maybe-all-gcc[+
 
  ENDFOR target_modules +]
 
@endif gcc-no-bootstrap
 
 
 
 
 
# There are two types of dependencies here: 'hard' dependencies, where one
 
# module simply won't build without the other; and 'soft' dependencies, where
 
# if the depended-on module is missing, the depending module will do without
 
# or find a substitute somewhere (perhaps installed).  Soft dependencies
 
# are made here to depend on a 'maybe-' target.  If you're not sure,
 
# it's safer to use a soft dependency.
 
 
 
[+ ;; These Scheme functions build the bulk of the dependencies.
 
   ;; dep-target builds a string like "maybe-all-MODULE_KIND-gcc",
 
   ;; where "maybe-" is only included if HARD is not true, and all-gcc
 
   ;; is taken from VAR-NAME.
 
   (define dep-target (lambda (module-kind var-name hard)
 
      (string-append
 
         (if hard "" "maybe-")
 
         (dep-subtarget var-name)
 
         module-kind
 
         (dep-module var-name)
 
      )))
 
 
 
   ;; make-dep builds a dependency from the MODULE and ON AutoGen vars.
 
   (define make-dep (lambda (module-kind on-kind)
 
      (string-append
 
         (dep-target module-kind "module" #t) ": "
 
         (dep-target on-kind "on" (exist? "hard")))))
 
 
 
   ;; dep-subtarget extracts everything up to the first dash in the given
 
   ;; AutoGen variable, for example it extracts "all-" out of "all-gcc".
 
   (define dep-subtarget (lambda (var-name)
 
      (substring (get var-name) 0 (+ 1 (string-index (get var-name) #\-)))))
 
 
 
   ;; dep-module extracts everything up to the first dash in the given
 
   ;; AutoGen variable, for example it extracts "gcc" out of "all-gcc".
 
   (define dep-module (lambda (var-name)
 
      (substring (get var-name) (+ 1 (string-index (get var-name) #\-)))))
 
 
 
   ;; dep-stage builds a string for the prefix of a bootstrap stage.
 
   (define dep-stage (lambda ()
 
      (string-append
 
         "stage"
 
         (get "id")
 
         "-")))
 
 
 
   ;; dep-maybe is the same as the AutoGen expression "- hard 'maybe-'"
 
   ;; but is written in Scheme.
 
   (define dep-maybe (lambda ()
 
      (if (exist? "hard") "" "maybe-")))
 
 
 
   ;; dep-kind returns "normal" if the dependency is on an "install" target,
 
   ;; or if either module is not bootstrapped.  It returns "bootstrap" for
 
   ;; configure or build dependencies between bootstrapped modules; it returns
 
   ;; "prebootstrap" for configure or build dependencies of bootstrapped
 
   ;; modules on a build module (e.g. all-gcc on all-build-bison).  All this
 
   ;; is only necessary for host modules.
 
   (define dep-kind (lambda ()
 
      (if (and (hash-ref boot-modules (dep-module "module"))
 
               (=* (dep-module "on") "build-"))
 
          "prebootstrap"
 
 
 
          (if (or (= (dep-subtarget "on") "install-")
 
                  (not (hash-ref boot-modules (dep-module "module")))
 
                  (not (hash-ref boot-modules (dep-module "on"))))
 
              "normal"
 
              "bootstrap"))))
 
 
 
   ;; We now build the hash table that is used by dep-kind.
 
   (define boot-modules (make-hash-table 113))
 
+]
 
 
 
[+ FOR host_modules +][+
 
   (if (exist? "bootstrap")
 
       (hash-create-handle! boot-modules (get "module") #t))
 
   "" +][+ ENDFOR host_modules +]
 
[+ FOR target_modules +][+
 
   (if (exist? "bootstrap")
 
       (hash-create-handle! boot-modules (string-append "target-" (get "module")) #t))
 
   "" +][+ ENDFOR target_modules +]
 
 
 
# With all the machinery above in place, it is pretty easy to generate
 
# dependencies.  Host dependencies are a bit more complex because we have
 
# to check for bootstrap/prebootstrap dependencies.  To resolve
 
# prebootstrap dependencies, prebootstrap modules are gathered in
 
# a hash table.
 
[+ FOR dependencies +][+ (make-dep "" "") +]
 
[+ CASE (dep-kind) +]
 
[+ == "prebootstrap"
 
     +][+ FOR bootstrap_stage +]
 
[+ (make-dep (dep-stage) "") +][+
 
       ENDFOR bootstrap_stage +]
 
[+ == "bootstrap"
 
     +][+ FOR bootstrap_stage +]
 
[+ (make-dep (dep-stage) (dep-stage)) +][+
 
       ENDFOR bootstrap_stage +]
 
[+ ESAC +][+
 
ENDFOR dependencies +]
 
 
 
# Dependencies for target modules on other target modules are
 
# described by lang_env_dependencies; the defaults apply to anything
 
# not mentioned there.
 
[+
 
   ;; Predicate for whether LANG was specified in lang_env_dependencies.
 
   (define lang-dep (lambda (lang)
 
      (hash-ref lang-env-deps (string-append (get "module") "-" lang))))
 
 
 
   ;; Build the hash table we will need.
 
   (define lang-env-deps (make-hash-table 7))
 
+][+ FOR lang_env_dependencies +][+
 
   (if (exist? "cxx")
 
       (hash-create-handle! lang-env-deps
 
          (string-append (get "module") "-" "cxx") #t))
 
 
 
   (if (exist? "no_c")
 
       (hash-create-handle! lang-env-deps
 
          (string-append (get "module") "-" "no_c") #t))
 
 
 
   (if (exist? "no_gcc")
 
       (hash-create-handle! lang-env-deps
 
          (string-append (get "module") "-" "no_gcc") #t))
 
   "" +][+ ENDFOR lang_env_dependencies +]
 
 
 
@if gcc-bootstrap[+ FOR target_modules +][+ IF (not (lang-dep "no_gcc"))
 
  +][+ IF bootstrap +][+ FOR bootstrap_stage +]
 
configure-stage[+id+]-target-[+module+]: maybe-all-stage[+id+]-target-libgcc[+
 
  ENDFOR +][+ ENDIF bootstrap +][+ ENDIF +][+ ENDFOR target_modules +]
 
@endif gcc-bootstrap
 
 
 
@if gcc-no-bootstrap[+ FOR target_modules +][+ IF (not (lang-dep "no_gcc")) +]
 
configure-target-[+module+]: maybe-all-target-libgcc[+
 
  ENDIF +][+ ENDFOR target_modules +]
 
@endif gcc-no-bootstrap
 
 
 
[+ FOR target_modules +][+ IF (not (lang-dep "no_c")) +]
 
configure-target-[+module+]: maybe-all-target-newlib maybe-all-target-libgloss[+
 
  ENDIF +][+ IF (lang-dep "cxx") +]
 
configure-target-[+module+]: maybe-all-target-libstdc++-v3[+
 
  ENDIF +]
 
[+ ENDFOR target_modules +]
 
 
 
CONFIGURE_GDB_TK = @CONFIGURE_GDB_TK@
 
GDB_TK = @GDB_TK@
 
INSTALL_GDB_TK = @INSTALL_GDB_TK@
 
configure-gdb: $(CONFIGURE_GDB_TK)
 
all-gdb: $(gdbnlmrequirements) $(GDB_TK)
 
install-gdb: $(INSTALL_GDB_TK)
 
 
 
# Serialization dependencies.  Host configures don't work well in parallel to
 
# each other, due to contention over config.cache.  Target configures and
 
# build configures are similar.
 
@serialization_dependencies@
 
 
 
# --------------------------------
 
# Regenerating top level configury
 
# --------------------------------
 
 
 
# Rebuilding Makefile.in, using autogen.
 
AUTOGEN = autogen
 
$(srcdir)/Makefile.in: @MAINT@ $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
 
        cd $(srcdir) && $(AUTOGEN) Makefile.def
 
 
 
# Rebuilding Makefile.
 
Makefile: $(srcdir)/Makefile.in config.status
 
        CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
 
 
 
config.status: configure
 
        CONFIG_SHELL="$(SHELL)" $(SHELL) ./config.status --recheck
 
 
 
# Rebuilding configure.
 
AUTOCONF = autoconf
 
$(srcdir)/configure: @MAINT@ $(srcdir)/configure.ac $(srcdir)/config/acx.m4 \
 
        $(srcdir)/config/override.m4 $(srcdir)/config/proginstall.m4
 
        cd $(srcdir) && $(AUTOCONF)
 
 
 
# ------------------------------
 
# Special directives to GNU Make
 
# ------------------------------
 
 
 
# Don't pass command-line variables to submakes.
 
.NOEXPORT:
 
MAKEOVERRIDES=
 
 
 
# end of Makefile.in

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.