OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [depcomp] - Diff between revs 834 and 842

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 834 Rev 842
?rev1line?
?rev2line?
 
#! /bin/sh
 
# depcomp - compile a program generating dependencies as side-effects
 
 
 
scriptversion=2009-04-28.21; # UTC
 
 
 
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
 
# Software Foundation, Inc.
 
 
 
# This program is free software; you can redistribute it and/or modify
 
# it under the terms of the GNU General Public License as published by
 
# the Free Software Foundation; either version 2, or (at your option)
 
# any later version.
 
 
 
# This program is distributed in the hope that it will be useful,
 
# but WITHOUT ANY WARRANTY; without even the implied warranty of
 
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 
# GNU General Public License for more details.
 
 
 
# You should have received a copy of the GNU General Public License
 
# along with this program.  If not, see .
 
 
 
# As a special exception to the GNU General Public License, if you
 
# distribute this file as part of a program that contains a
 
# configuration script generated by Autoconf, you may include it under
 
# the same distribution terms that you use for the rest of that program.
 
 
 
# Originally written by Alexandre Oliva .
 
 
 
case $1 in
 
  '')
 
     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
 
     exit 1;
 
     ;;
 
  -h | --h*)
 
    cat <<\EOF
 
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
 
 
 
Run PROGRAMS ARGS to compile a file, generating dependencies
 
as side-effects.
 
 
 
Environment variables:
 
  depmode     Dependency tracking mode.
 
  source      Source file read by `PROGRAMS ARGS'.
 
  object      Object file output by `PROGRAMS ARGS'.
 
  DEPDIR      directory where to store dependencies.
 
  depfile     Dependency file to output.
 
  tmpdepfile  Temporary file to use when outputing dependencies.
 
  libtool     Whether libtool is used (yes/no).
 
 
 
Report bugs to .
 
EOF
 
    exit $?
 
    ;;
 
  -v | --v*)
 
    echo "depcomp $scriptversion"
 
    exit $?
 
    ;;
 
esac
 
 
 
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
 
  echo "depcomp: Variables source, object and depmode must be set" 1>&2
 
  exit 1
 
fi
 
 
 
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
 
depfile=${depfile-`echo "$object" |
 
  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
 
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 
 
rm -f "$tmpdepfile"
 
 
 
# Some modes work just like other modes, but use different flags.  We
 
# parameterize here, but still list the modes in the big case below,
 
# to make depend.m4 easier to write.  Note that we *cannot* use a case
 
# here, because this file can only contain one case statement.
 
if test "$depmode" = hp; then
 
  # HP compiler uses -M and no extra arg.
 
  gccflag=-M
 
  depmode=gcc
 
fi
 
 
 
if test "$depmode" = dashXmstdout; then
 
   # This is just like dashmstdout with a different argument.
 
   dashmflag=-xM
 
   depmode=dashmstdout
 
fi
 
 
 
cygpath_u="cygpath -u -f -"
 
if test "$depmode" = msvcmsys; then
 
   # This is just like msvisualcpp but w/o cygpath translation.
 
   # Just convert the backslash-escaped backslashes to single forward
 
   # slashes to satisfy depend.m4
 
   cygpath_u="sed s,\\\\\\\\,/,g"
 
   depmode=msvisualcpp
 
fi
 
 
 
case "$depmode" in
 
gcc3)
 
## gcc 3 implements dependency tracking that does exactly what
 
## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 
## it if -MD -MP comes after the -MF stuff.  Hmm.
 
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
 
## the command line argument order; so add the flags where they
 
## appear in depend2.am.  Note that the slowdown incurred here
 
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
 
  for arg
 
  do
 
    case $arg in
 
    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
 
    *)  set fnord "$@" "$arg" ;;
 
    esac
 
    shift # fnord
 
    shift # $arg
 
  done
 
  "$@"
 
  stat=$?
 
  if test $stat -eq 0; then :
 
  else
 
    rm -f "$tmpdepfile"
 
    exit $stat
 
  fi
 
  mv "$tmpdepfile" "$depfile"
 
  ;;
 
 
 
gcc)
 
## There are various ways to get dependency output from gcc.  Here's
 
## why we pick this rather obscure method:
 
## - Don't want to use -MD because we'd like the dependencies to end
 
##   up in a subdir.  Having to rename by hand is ugly.
 
##   (We might end up doing this anyway to support other compilers.)
 
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
 
##   -MM, not -M (despite what the docs say).
 
## - Using -M directly means running the compiler twice (even worse
 
##   than renaming).
 
  if test -z "$gccflag"; then
 
    gccflag=-MD,
 
  fi
 
  "$@" -Wp,"$gccflag$tmpdepfile"
 
  stat=$?
 
  if test $stat -eq 0; then :
 
  else
 
    rm -f "$tmpdepfile"
 
    exit $stat
 
  fi
 
  rm -f "$depfile"
 
  echo "$object : \\" > "$depfile"
 
  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
 
## The second -e expression handles DOS-style file names with drive letters.
 
  sed -e 's/^[^:]*: / /' \
 
      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
 
## This next piece of magic avoids the `deleted header file' problem.
 
## The problem is that when a header file which appears in a .P file
 
## is deleted, the dependency causes make to die (because there is
 
## typically no way to rebuild the header).  We avoid this by adding
 
## dummy dependencies for each header file.  Too bad gcc doesn't do
 
## this for us directly.
 
  tr ' ' '
 
' < "$tmpdepfile" |
 
## Some versions of gcc put a space before the `:'.  On the theory
 
## that the space means something, we add a space to the output as
 
## well.
 
## Some versions of the HPUX 10.20 sed can't process this invocation
 
## correctly.  Breaking it into two sed invocations is a workaround.
 
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
 
  rm -f "$tmpdepfile"
 
  ;;
 
 
 
hp)
 
  # This case exists only to let depend.m4 do its work.  It works by
 
  # looking at the text of this script.  This case will never be run,
 
  # since it is checked for above.
 
  exit 1
 
  ;;
 
 
 
sgi)
 
  if test "$libtool" = yes; then
 
    "$@" "-Wp,-MDupdate,$tmpdepfile"
 
  else
 
    "$@" -MDupdate "$tmpdepfile"
 
  fi
 
  stat=$?
 
  if test $stat -eq 0; then :
 
  else
 
    rm -f "$tmpdepfile"
 
    exit $stat
 
  fi
 
  rm -f "$depfile"
 
 
 
  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
 
    echo "$object : \\" > "$depfile"
 
 
 
    # Clip off the initial element (the dependent).  Don't try to be
 
    # clever and replace this with sed code, as IRIX sed won't handle
 
    # lines with more than a fixed number of characters (4096 in
 
    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
 
    # the IRIX cc adds comments like `#:fec' to the end of the
 
    # dependency line.
 
    tr ' ' '
 
' < "$tmpdepfile" \
 
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
 
    tr '
 
' ' ' >> "$depfile"
 
    echo >> "$depfile"
 
 
 
    # The second pass generates a dummy entry for each header file.
 
    tr ' ' '
 
' < "$tmpdepfile" \
 
   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
 
   >> "$depfile"
 
  else
 
    # The sourcefile does not contain any dependencies, so just
 
    # store a dummy comment line, to avoid errors with the Makefile
 
    # "include basename.Plo" scheme.
 
    echo "#dummy" > "$depfile"
 
  fi
 
  rm -f "$tmpdepfile"
 
  ;;
 
 
 
aix)
 
  # The C for AIX Compiler uses -M and outputs the dependencies
 
  # in a .u file.  In older versions, this file always lives in the
 
  # current directory.  Also, the AIX compiler puts `$object:' at the
 
  # start of each line; $object doesn't have directory information.
 
  # Version 6 uses the directory in both cases.
 
  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
 
  test "x$dir" = "x$object" && dir=
 
  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
  if test "$libtool" = yes; then
 
    tmpdepfile1=$dir$base.u
 
    tmpdepfile2=$base.u
 
    tmpdepfile3=$dir.libs/$base.u
 
    "$@" -Wc,-M
 
  else
 
    tmpdepfile1=$dir$base.u
 
    tmpdepfile2=$dir$base.u
 
    tmpdepfile3=$dir$base.u
 
    "$@" -M
 
  fi
 
  stat=$?
 
 
 
  if test $stat -eq 0; then :
 
  else
 
    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
 
    exit $stat
 
  fi
 
 
 
  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
 
  do
 
    test -f "$tmpdepfile" && break
 
  done
 
  if test -f "$tmpdepfile"; then
 
    # Each line is of the form `foo.o: dependent.h'.
 
    # Do two passes, one to just change these to
 
    # `$object: dependent.h' and one to simply `dependent.h:'.
 
    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
 
    # That's a tab and a space in the [].
 
    sed -e 's,^.*\.[a-z]*:[      ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
 
  else
 
    # The sourcefile does not contain any dependencies, so just
 
    # store a dummy comment line, to avoid errors with the Makefile
 
    # "include basename.Plo" scheme.
 
    echo "#dummy" > "$depfile"
 
  fi
 
  rm -f "$tmpdepfile"
 
  ;;
 
 
 
icc)
 
  # Intel's C compiler understands `-MD -MF file'.  However on
 
  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
 
  # ICC 7.0 will fill foo.d with something like
 
  #    foo.o: sub/foo.c
 
  #    foo.o: sub/foo.h
 
  # which is wrong.  We want:
 
  #    sub/foo.o: sub/foo.c
 
  #    sub/foo.o: sub/foo.h
 
  #    sub/foo.c:
 
  #    sub/foo.h:
 
  # ICC 7.1 will output
 
  #    foo.o: sub/foo.c sub/foo.h
 
  # and will wrap long lines using \ :
 
  #    foo.o: sub/foo.c ... \
 
  #     sub/foo.h ... \
 
  #     ...
 
 
 
  "$@" -MD -MF "$tmpdepfile"
 
  stat=$?
 
  if test $stat -eq 0; then :
 
  else
 
    rm -f "$tmpdepfile"
 
    exit $stat
 
  fi
 
  rm -f "$depfile"
 
  # Each line is of the form `foo.o: dependent.h',
 
  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
 
  # Do two passes, one to just change these to
 
  # `$object: dependent.h' and one to simply `dependent.h:'.
 
  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
 
  # Some versions of the HPUX 10.20 sed can't process this invocation
 
  # correctly.  Breaking it into two sed invocations is a workaround.
 
  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
 
    sed -e 's/$/ :/' >> "$depfile"
 
  rm -f "$tmpdepfile"
 
  ;;
 
 
 
hp2)
 
  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
 
  # compilers, which have integrated preprocessors.  The correct option
 
  # to use with these is +Maked; it writes dependencies to a file named
 
  # 'foo.d', which lands next to the object file, wherever that
 
  # happens to be.
 
  # Much of this is similar to the tru64 case; see comments there.
 
  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
 
  test "x$dir" = "x$object" && dir=
 
  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
  if test "$libtool" = yes; then
 
    tmpdepfile1=$dir$base.d
 
    tmpdepfile2=$dir.libs/$base.d
 
    "$@" -Wc,+Maked
 
  else
 
    tmpdepfile1=$dir$base.d
 
    tmpdepfile2=$dir$base.d
 
    "$@" +Maked
 
  fi
 
  stat=$?
 
  if test $stat -eq 0; then :
 
  else
 
     rm -f "$tmpdepfile1" "$tmpdepfile2"
 
     exit $stat
 
  fi
 
 
 
  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
 
  do
 
    test -f "$tmpdepfile" && break
 
  done
 
  if test -f "$tmpdepfile"; then
 
    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
 
    # Add `dependent.h:' lines.
 
    sed -ne '2,${
 
               s/^ *//
 
               s/ \\*$//
 
               s/$/:/
 
               p
 
             }' "$tmpdepfile" >> "$depfile"
 
  else
 
    echo "#dummy" > "$depfile"
 
  fi
 
  rm -f "$tmpdepfile" "$tmpdepfile2"
 
  ;;
 
 
 
tru64)
 
   # The Tru64 compiler uses -MD to generate dependencies as a side
 
   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
 
   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
 
   # dependencies in `foo.d' instead, so we check for that too.
 
   # Subdirectories are respected.
 
   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
 
   test "x$dir" = "x$object" && dir=
 
   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
 
 
   if test "$libtool" = yes; then
 
      # With Tru64 cc, shared objects can also be used to make a
 
      # static library.  This mechanism is used in libtool 1.4 series to
 
      # handle both shared and static libraries in a single compilation.
 
      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
 
      #
 
      # With libtool 1.5 this exception was removed, and libtool now
 
      # generates 2 separate objects for the 2 libraries.  These two
 
      # compilations output dependencies in $dir.libs/$base.o.d and
 
      # in $dir$base.o.d.  We have to check for both files, because
 
      # one of the two compilations can be disabled.  We should prefer
 
      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
 
      # automatically cleaned when .libs/ is deleted, while ignoring
 
      # the former would cause a distcleancheck panic.
 
      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
 
      tmpdepfile2=$dir$base.o.d          # libtool 1.5
 
      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
 
      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
 
      "$@" -Wc,-MD
 
   else
 
      tmpdepfile1=$dir$base.o.d
 
      tmpdepfile2=$dir$base.d
 
      tmpdepfile3=$dir$base.d
 
      tmpdepfile4=$dir$base.d
 
      "$@" -MD
 
   fi
 
 
 
   stat=$?
 
   if test $stat -eq 0; then :
 
   else
 
      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
 
      exit $stat
 
   fi
 
 
 
   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
 
   do
 
     test -f "$tmpdepfile" && break
 
   done
 
   if test -f "$tmpdepfile"; then
 
      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
 
      # That's a tab and a space in the [].
 
      sed -e 's,^.*\.[a-z]*:[    ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
 
   else
 
      echo "#dummy" > "$depfile"
 
   fi
 
   rm -f "$tmpdepfile"
 
   ;;
 
 
 
#nosideeffect)
 
  # This comment above is used by automake to tell side-effect
 
  # dependency tracking mechanisms from slower ones.
 
 
 
dashmstdout)
 
  # Important note: in order to support this mode, a compiler *must*
 
  # always write the preprocessed file to stdout, regardless of -o.
 
  "$@" || exit $?
 
 
 
  # Remove the call to Libtool.
 
  if test "$libtool" = yes; then
 
    while test "X$1" != 'X--mode=compile'; do
 
      shift
 
    done
 
    shift
 
  fi
 
 
 
  # Remove `-o $object'.
 
  IFS=" "
 
  for arg
 
  do
 
    case $arg in
 
    -o)
 
      shift
 
      ;;
 
    $object)
 
      shift
 
      ;;
 
    *)
 
      set fnord "$@" "$arg"
 
      shift # fnord
 
      shift # $arg
 
      ;;
 
    esac
 
  done
 
 
 
  test -z "$dashmflag" && dashmflag=-M
 
  # Require at least two characters before searching for `:'
 
  # in the target name.  This is to cope with DOS-style filenames:
 
  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
 
  "$@" $dashmflag |
 
    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
 
  rm -f "$depfile"
 
  cat < "$tmpdepfile" > "$depfile"
 
  tr ' ' '
 
' < "$tmpdepfile" | \
 
## Some versions of the HPUX 10.20 sed can't process this invocation
 
## correctly.  Breaking it into two sed invocations is a workaround.
 
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
 
  rm -f "$tmpdepfile"
 
  ;;
 
 
 
dashXmstdout)
 
  # This case only exists to satisfy depend.m4.  It is never actually
 
  # run, as this mode is specially recognized in the preamble.
 
  exit 1
 
  ;;
 
 
 
makedepend)
 
  "$@" || exit $?
 
  # Remove any Libtool call
 
  if test "$libtool" = yes; then
 
    while test "X$1" != 'X--mode=compile'; do
 
      shift
 
    done
 
    shift
 
  fi
 
  # X makedepend
 
  shift
 
  cleared=no eat=no
 
  for arg
 
  do
 
    case $cleared in
 
    no)
 
      set ""; shift
 
      cleared=yes ;;
 
    esac
 
    if test $eat = yes; then
 
      eat=no
 
      continue
 
    fi
 
    case "$arg" in
 
    -D*|-I*)
 
      set fnord "$@" "$arg"; shift ;;
 
    # Strip any option that makedepend may not understand.  Remove
 
    # the object too, otherwise makedepend will parse it as a source file.
 
    -arch)
 
      eat=yes ;;
 
    -*|$object)
 
      ;;
 
    *)
 
      set fnord "$@" "$arg"; shift ;;
 
    esac
 
  done
 
  obj_suffix=`echo "$object" | sed 's/^.*\././'`
 
  touch "$tmpdepfile"
 
  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
 
  rm -f "$depfile"
 
  cat < "$tmpdepfile" > "$depfile"
 
  sed '1,2d' "$tmpdepfile" | tr ' ' '
 
' | \
 
## Some versions of the HPUX 10.20 sed can't process this invocation
 
## correctly.  Breaking it into two sed invocations is a workaround.
 
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
 
  rm -f "$tmpdepfile" "$tmpdepfile".bak
 
  ;;
 
 
 
cpp)
 
  # Important note: in order to support this mode, a compiler *must*
 
  # always write the preprocessed file to stdout.
 
  "$@" || exit $?
 
 
 
  # Remove the call to Libtool.
 
  if test "$libtool" = yes; then
 
    while test "X$1" != 'X--mode=compile'; do
 
      shift
 
    done
 
    shift
 
  fi
 
 
 
  # Remove `-o $object'.
 
  IFS=" "
 
  for arg
 
  do
 
    case $arg in
 
    -o)
 
      shift
 
      ;;
 
    $object)
 
      shift
 
      ;;
 
    *)
 
      set fnord "$@" "$arg"
 
      shift # fnord
 
      shift # $arg
 
      ;;
 
    esac
 
  done
 
 
 
  "$@" -E |
 
    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
 
       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
 
    sed '$ s: \\$::' > "$tmpdepfile"
 
  rm -f "$depfile"
 
  echo "$object : \\" > "$depfile"
 
  cat < "$tmpdepfile" >> "$depfile"
 
  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
 
  rm -f "$tmpdepfile"
 
  ;;
 
 
 
msvisualcpp)
 
  # Important note: in order to support this mode, a compiler *must*
 
  # always write the preprocessed file to stdout.
 
  "$@" || exit $?
 
 
 
  # Remove the call to Libtool.
 
  if test "$libtool" = yes; then
 
    while test "X$1" != 'X--mode=compile'; do
 
      shift
 
    done
 
    shift
 
  fi
 
 
 
  IFS=" "
 
  for arg
 
  do
 
    case "$arg" in
 
    -o)
 
      shift
 
      ;;
 
    $object)
 
      shift
 
      ;;
 
    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
 
        set fnord "$@"
 
        shift
 
        shift
 
        ;;
 
    *)
 
        set fnord "$@" "$arg"
 
        shift
 
        shift
 
        ;;
 
    esac
 
  done
 
  "$@" -E 2>/dev/null |
 
  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
 
  rm -f "$depfile"
 
  echo "$object : \\" > "$depfile"
 
  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
 
  echo "        " >> "$depfile"
 
  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
 
  rm -f "$tmpdepfile"
 
  ;;
 
 
 
msvcmsys)
 
  # This case exists only to let depend.m4 do its work.  It works by
 
  # looking at the text of this script.  This case will never be run,
 
  # since it is checked for above.
 
  exit 1
 
  ;;
 
 
 
none)
 
  exec "$@"
 
  ;;
 
 
 
*)
 
  echo "Unknown depmode $depmode" 1>&2
 
  exit 1
 
  ;;
 
esac
 
 
 
exit 0
 
 
 
# Local Variables:
 
# mode: shell-script
 
# sh-indentation: 2
 
# eval: (add-hook 'write-file-hooks 'time-stamp)
 
# time-stamp-start: "scriptversion="
 
# time-stamp-format: "%:y-%02m-%02d.%02H"
 
# time-stamp-time-zone: "UTC"
 
# time-stamp-end: "; # UTC"
 
# End:

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.