OpenCores

Line 1...

# Generated from ltmain.m4sh.

# ltmain.sh (GNU libtool) 2.2.6

# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996

# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.

# This is free software; see the source for copying conditions.  There is NO

# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# GNU Libtool is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

# As a special exception to the GNU General Public License,

# if you distribute this file as part of a program or library that

# is built using GNU Libtool, you may include this file under the

# same distribution terms that you use for the rest of that program.

# GNU Libtool is distributed in the hope that it will be useful, but

# WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

# General Public License for more details.

# You should have received a copy of the GNU General Public License

# along with GNU Libtool; see the file COPYING.  If not, a copy

# can be downloaded from http://www.gnu.org/licenses/gpl.html,

# or obtained by writing to the Free Software Foundation, Inc.,

# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

# Usage: $progname [OPTION]... [MODE-ARG]...

# Provide generalized library-building support services.

#     --config             show all configuration variables

#     --debug              enable verbose shell tracing

# -n, --dry-run            display commands without modifying any files

#     --features           display basic configuration information and exit

#     --mode=MODE          use operation mode MODE

#     --preserve-dup-deps  don't remove duplicate dependency libraries

#     --quiet, --silent    don't print informational messages

#     --tag=TAG            use configuration variables from tag TAG

# -v, --verbose            print informational messages (default)

#     --version            print version information

# -h, --help               print short or long help message

# MODE must be one of the following:

#       clean              remove files from the build directory

#       compile            compile a source file into a libtool object

#       execute            automatically set library path, then run a program

#       finish             complete the installation of libtool libraries

#       install            install libraries or executables

#       link               create a library or an executable

#       uninstall          remove libraries from an installed directory

# MODE-ARGS vary depending on the MODE.

# Try `$progname --help --mode=MODE' for a more detailed description of MODE.

# When reporting a bug, please describe a test case to reproduce it and

# include the following information:

#       host-triplet:   $host

#       shell:          $SHELL

#       compiler:               $LTCC

#       compiler flags:         $LTCFLAGS

#       linker:         $LD (gnu? $with_gnu_ld)

#       $progname:              (GNU libtool) 2.2.6

#       automake:               $automake_version

#       autoconf:               $autoconf_version

# Report bugs to <bug-libtool@gnu.org>.

PROGRAM=ltmain.sh

PACKAGE=libtool

VERSION=2.2.6

TIMESTAMP=""

package_revision=1.3012

# Be Bourne compatible

if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then

  emulate sh

  NULLCMD=:

  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which

  # is contrary to our usage.  Disable this feature.

  alias -g '${1+"$@"}'='"$@"'

  setopt NO_GLOB_SUBST

else

  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac

fi

BIN_SH=xpg4; export BIN_SH # for Tru64

DUALCASE=1; export DUALCASE # for MKS sh

# NLS nuisances: We save the old values to restore during execute mode.

# Only set LANG and LC_ALL to C if already set.

# These must not be set unconditionally because not all systems understand

# e.g. LANG=C (notably SCO).

lt_user_locale=

lt_safe_locale=

for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES

do

  eval "if test \"\${$lt_var+set}\" = set; then

          save_$lt_var=\$$lt_var

          $lt_var=C

          export $lt_var

          lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"

          lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"

fi"

done

$lt_unset CDPATH

: ${CP="cp -f"}

: ${ECHO="echo"}

: ${EGREP="/usr/bin/grep -E"}

: ${FGREP="/usr/bin/grep -F"}

: ${GREP="/usr/bin/grep"}

: ${LN_S="ln -s"}

: ${MAKE="make"}

: ${MKDIR="mkdir"}

: ${MV="mv -f"}

: ${RM="rm -f"}

: ${SED="/opt/local/bin/gsed"}

: ${SHELL="${CONFIG_SHELL-/bin/sh}"}

: ${Xsed="$SED -e 1s/^X//"}

# Global variables:

EXIT_SUCCESS=0

EXIT_FAILURE=1

EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.

EXIT_SKIP=77      # $? = 77 is used to indicate a skipped test to automake.

exit_status=$EXIT_SUCCESS

# Make sure IFS has a sensible default

lt_nl='

IFS="   $lt_nl"

dirname="s,/[^/]*$,,"

basename="s,^.*/,,"

# func_dirname_and_basename file append nondir_replacement

# perform func_basename and func_dirname in a single function

# call:

#   dirname:  Compute the dirname of FILE.  If nonempty,

#             add APPEND to the result, otherwise set result

#             to NONDIR_REPLACEMENT.

#             value returned in "$func_dirname_result"

#   basename: Compute filename of FILE.

#             value retuned in "$func_basename_result"

# Implementation must be kept synchronized with func_dirname

# and func_basename. For efficiency, we do not delegate to

# those functions but instead duplicate the functionality here.

func_dirname_and_basename ()

  # Extract subdirectory from the argument.

  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`

  if test "X$func_dirname_result" = "X${1}"; then

    func_dirname_result="${3}"

  else

    func_dirname_result="$func_dirname_result${2}"

fi

  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`

# Generated shell functions inserted here.

# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh

# is ksh but when the shell is invoked as "sh" and the current value of

# the _XPG environment variable is not equal to 1 (one), the special

# positional parameter $0, within a function call, is the name of the

# function.

progpath="$0"

# The name of this program:

# In the unlikely event $progname began with a '-', it would play havoc with

# func_echo (imagine progname=-n), so we prepend ./ in that case:

func_dirname_and_basename "$progpath"

progname=$func_basename_result

case $progname in

  -*) progname=./$progname ;;

esac

# Make sure we have an absolute path for reexecution:

case $progpath in

  [\\/]*|[A-Za-z]:\\*) ;;

  *[\\/]*)

     progdir=$func_dirname_result

     progdir=`cd "$progdir" && pwd`

     progpath="$progdir/$progname"

;;

*)

     save_IFS="$IFS"

     IFS=:

     for progdir in $PATH; do

       IFS="$save_IFS"

       test -x "$progdir/$progname" && break

     done

     IFS="$save_IFS"

     test -n "$progdir" || progdir=`pwd`

     progpath="$progdir/$progname"

;;

esac

# Sed substitution that helps us do robust quoting.  It backslashifies

# metacharacters that are still active within double-quoted strings.

Xsed="${SED}"' -e 1s/^X//'

sed_quote_subst='s/\([`"$\\]\)/\\\1/g'

# Same as above, but do not quote variable references.

double_quote_subst='s/\(["`\\]\)/\\\1/g'

# Re-`\' parameter expansions in output of double_quote_subst that were

# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'

# in input to double_quote_subst, that '$' was protected from expansion.

# Since each input `\' is now two `\'s, look for any number of runs of

# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.

bs='\\'

bs2='\\\\'

bs4='\\\\\\\\'

dollar='\$'

sed_double_backslash="\

  s/$bs4/&\\

/g

  s/^$bs2$dollar/$bs&/

  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g

  s/\n//g"

# Standard options:

opt_dry_run=false

opt_help=false

opt_quiet=false

opt_verbose=false

opt_warning=:

# func_echo arg...

# Echo program name prefixed message, along with the current mode

# name if it has been set yet.

func_echo ()

    $ECHO "$progname${mode+: }$mode: $*"

# func_verbose arg...

# Echo program name prefixed message in verbose mode only.

func_verbose ()

    $opt_verbose && func_echo ${1+"$@"}

    # A bug in bash halts the script if the last line of a function

    # fails when set -e is in force, so we need another command to

    # work around that:

# func_error arg...

# Echo program name prefixed message to standard error.

func_error ()

    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2

# func_warning arg...

# Echo program name prefixed warning message to standard error.

func_warning ()

    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2

    # bash bug again:

# func_fatal_error arg...

# Echo program name prefixed message to standard error, and exit.

func_fatal_error ()

    func_error ${1+"$@"}

    exit $EXIT_FAILURE

# func_fatal_help arg...

# Echo program name prefixed message to standard error, followed by

# a help hint, and exit.

func_fatal_help ()

    func_error ${1+"$@"}

    func_fatal_error "$help"

help="Try \`$progname --help' for more information."  ## default

# func_grep expression filename

# Check whether EXPRESSION matches any line of FILENAME, without output.

func_grep ()

    $GREP "$1" "$2" >/dev/null 2>&1

# func_mkdir_p directory-path

# Make sure the entire path to DIRECTORY-PATH is available.

func_mkdir_p ()

    my_directory_path="$1"

    my_dir_list=

    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then

      # Protect directory names starting with `-'

      case $my_directory_path in

        -*) my_directory_path="./$my_directory_path" ;;

      esac

      # While some portion of DIR does not yet exist...

      while test ! -d "$my_directory_path"; do

        # ...make a list in topmost first order.  Use a colon delimited

        # list incase some portion of path contains whitespace.

        my_dir_list="$my_directory_path:$my_dir_list"

        # If the last portion added has no slash in it, the list is done

        case $my_directory_path in */*) ;; *) break ;; esac

        # ...otherwise throw away the child directory and loop

        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`

      done

      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`

      save_mkdir_p_IFS="$IFS"; IFS=':'

      for my_dir in $my_dir_list; do

        IFS="$save_mkdir_p_IFS"

        # mkdir can fail with a `File exist' error if two processes

        # try to create one of the directories concurrently.  Don't

        # stop in that case!

        $MKDIR "$my_dir" 2>/dev/null || :

      done

      IFS="$save_mkdir_p_IFS"

      # Bail out if we (or some other process) failed to create a directory.

      test -d "$my_directory_path" || \

        func_fatal_error "Failed to create \`$1'"

fi

# func_mktempdir [string]

# Make a temporary directory that won't clash with other running

# libtool processes, and avoids race conditions if possible.  If

# given, STRING is the basename for that directory.

func_mktempdir ()

    my_template="${TMPDIR-/tmp}/${1-$progname}"

    if test "$opt_dry_run" = ":"; then

      # Return a directory name, but don't create it in dry-run mode

      my_tmpdir="${my_template}-$$"

    else

      # If mktemp works, use that first and foremost

      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`

      if test ! -d "$my_tmpdir"; then

        # Failing that, at least try and use $RANDOM to avoid a race

        my_tmpdir="${my_template}-${RANDOM-0}$$"

        save_mktempdir_umask=`umask`

        umask 0077

        $MKDIR "$my_tmpdir"

        umask $save_mktempdir_umask

fi

      # If we're not in dry-run mode, bomb out on failure

      test -d "$my_tmpdir" || \

        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"

fi

    $ECHO "X$my_tmpdir" | $Xsed

# func_quote_for_eval arg

# Aesthetically quote ARG to be evaled later.

# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT

# is double-quoted, suitable for a subsequent eval, whereas

# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters

# which are still active within double quotes backslashified.

func_quote_for_eval ()

    case $1 in

      *[\\\`\"\$]*)

        func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;

*)

        func_quote_for_eval_unquoted_result="$1" ;;

    esac

    case $func_quote_for_eval_unquoted_result in

      # Double-quote args containing shell metacharacters to delay

      # word splitting, command substitution and and variable

      # expansion for a subsequent eval.

      # Many Bourne shells cannot handle close brackets correctly

      # in scan sets, so we specify it separately.

      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")

        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""

;;

*)

        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"

    esac

# func_quote_for_expand arg

# Aesthetically quote ARG to be evaled later; same as above,

# but do not quote variable references.

func_quote_for_expand ()

    case $1 in

      *[\\\`\"]*)

        my_arg=`$ECHO "X$1" | $Xsed \

            -e "$double_quote_subst" -e "$sed_double_backslash"` ;;

*)

        my_arg="$1" ;;

    esac

    case $my_arg in

      # Double-quote args containing shell metacharacters to delay

      # word splitting and command substitution for a subsequent eval.

      # Many Bourne shells cannot handle close brackets correctly

      # in scan sets, so we specify it separately.

      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")

        my_arg="\"$my_arg\""

;;

    esac

    func_quote_for_expand_result="$my_arg"

# func_show_eval cmd [fail_exp]

# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is

# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP

# is given, then evaluate it.

func_show_eval ()

    my_cmd="$1"

    my_fail_exp="${2-:}"

    ${opt_silent-false} || {

      func_quote_for_expand "$my_cmd"

      eval "func_echo $func_quote_for_expand_result"

    if ${opt_dry_run-false}; then :; else

      eval "$my_cmd"

      my_status=$?

      if test "$my_status" -eq 0; then :; else

        eval "(exit $my_status); $my_fail_exp"

fi

fi

# func_show_eval_locale cmd [fail_exp]

# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is

# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP

# is given, then evaluate it.  Use the saved locale for evaluation.

func_show_eval_locale ()

    my_cmd="$1"

    my_fail_exp="${2-:}"

    ${opt_silent-false} || {

      func_quote_for_expand "$my_cmd"

      eval "func_echo $func_quote_for_expand_result"

    if ${opt_dry_run-false}; then :; else

      eval "$lt_user_locale

            $my_cmd"

      my_status=$?

      eval "$lt_safe_locale"

      if test "$my_status" -eq 0; then :; else

        eval "(exit $my_status); $my_fail_exp"

fi

fi

# func_version

# Echo version message to standard output and exit.

func_version ()

    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {

        s/^# //

        s/^# *$//

        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/

     }' < "$progpath"

     exit $?

# func_usage

# Echo short help message to standard output and exit.

func_usage ()

    $SED -n '/^# Usage:/,/# -h/ {

        s/^# //

        s/^# *$//

        s/\$progname/'$progname'/

    }' < "$progpath"

    $ECHO

    $ECHO "run \`$progname --help | more' for full usage"

    exit $?

# func_help

# Echo long help message to standard output and exit.

func_help ()

    $SED -n '/^# Usage:/,/# Report bugs to/ {

        s/^# //

        s/^# *$//

        s*\$progname*'$progname'*

        s*\$host*'"$host"'*

        s*\$SHELL*'"$SHELL"'*

        s*\$LTCC*'"$LTCC"'*

        s*\$LTCFLAGS*'"$LTCFLAGS"'*

        s*\$LD*'"$LD"'*

        s/\$with_gnu_ld/'"$with_gnu_ld"'/

        s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/

        s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/

     }' < "$progpath"

    exit $?

# func_missing_arg argname

# Echo program name prefixed message to standard error and set global

# exit_cmd.

func_missing_arg ()

    func_error "missing argument for $1"

    exit_cmd=exit

exit_cmd=:

# Check that we have a working $ECHO.

if test "X$1" = X--no-reexec; then

  # Discard the --no-reexec flag, and continue.

  shift

elif test "X$1" = X--fallback-echo; then

  # Avoid inline document here, it may be left over

elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then

  # Yippee, $ECHO works!

else

  # Restart under the correct shell, and then maybe $ECHO will work.

  exec $SHELL "$progpath" --no-reexec ${1+"$@"}

fi

if test "X$1" = X--fallback-echo; then

  # used as fallback echo

  shift

  cat <<EOF

$*

EOF

  exit $EXIT_SUCCESS

fi

magic="%%%MAGIC variable%%%"

magic_exe="%%%MAGIC EXE variable%%%"

# Global variables.

# $mode is unset

nonopt=

execute_dlfiles=

preserve_args=

lo2o="s/\\.lo\$/.${objext}/"

o2lo="s/\\.${objext}\$/.lo/"

extracted_archives=

extracted_serial=0

opt_dry_run=false

opt_duplicate_deps=false

opt_silent=false

opt_debug=:

# If this variable is set in any of the actions, the command in it

# will be execed at the end.  This prevents here-documents from being

# left over by shells.

exec_cmd=

# func_fatal_configuration arg...

# Echo program name prefixed message to standard error, followed by

# a configuration failure hint, and exit.

func_fatal_configuration ()

    func_error ${1+"$@"}

    func_error "See the $PACKAGE documentation for more information."

    func_fatal_error "Fatal configuration error."

# func_config

# Display the configuration for all the tags in this script.

func_config ()

    re_begincf='^# ### BEGIN LIBTOOL'

    re_endcf='^# ### END LIBTOOL'

    # Default configuration.

    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"

    # Now print the configurations for the tags.

    for tagname in $taglist; do

      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"

    done

    exit $?

# func_features

# Display the features supported by this script.

func_features ()

    $ECHO "host: $host"

    if test "$build_libtool_libs" = yes; then

      $ECHO "enable shared libraries"

    else

      $ECHO "disable shared libraries"

fi

    if test "$build_old_libs" = yes; then

      $ECHO "enable static libraries"

    else

      $ECHO "disable static libraries"

fi

    exit $?

# func_enable_tag tagname

# Verify that TAGNAME is valid, and either flag an error and exit, or

# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist

# variable here.

func_enable_tag ()

  # Global variable:

  tagname="$1"

  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"

  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"

  sed_extractcf="/$re_begincf/,/$re_endcf/p"

  # Validate tagname.

  case $tagname in

    *[!-_A-Za-z0-9,/]*)

      func_fatal_error "invalid tag name: $tagname"

;;

  esac

  # Don't test for the "default" C tag, as we know it's

  # there but not specially marked.

  case $tagname in

    CC) ;;

*)

      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then

        taglist="$taglist $tagname"

        # Evaluate the configuration.  Be careful to quote the path

        # and the sed script, to avoid splitting on whitespace, but

        # also don't use non-portable quotes within backquotes within

        # quotes we have to do it in 2 steps:

        extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`

        eval "$extractedcf"

      else

        func_error "ignoring unknown tag $tagname"

fi

;;

  esac

# Parse options once, thoroughly.  This comes as soon as possible in

# the script to make things like `libtool --version' happen quickly.

  # Shorthand for --mode=foo, only valid as the first argument

  case $1 in

  clean|clea|cle|cl)

    shift; set dummy --mode clean ${1+"$@"}; shift

;;

  compile|compil|compi|comp|com|co|c)

    shift; set dummy --mode compile ${1+"$@"}; shift

;;

  execute|execut|execu|exec|exe|ex|e)

    shift; set dummy --mode execute ${1+"$@"}; shift

;;

  finish|finis|fini|fin|fi|f)

    shift; set dummy --mode finish ${1+"$@"}; shift

;;

  install|instal|insta|inst|ins|in|i)

    shift; set dummy --mode install ${1+"$@"}; shift

;;

  link|lin|li|l)

    shift; set dummy --mode link ${1+"$@"}; shift

;;

  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)

    shift; set dummy --mode uninstall ${1+"$@"}; shift

;;

  esac

  # Parse non-mode specific arguments:

  while test "$#" -gt 0; do

    opt="$1"

    shift

    case $opt in

      --config)         func_config                                     ;;

      --debug)          preserve_args="$preserve_args $opt"

                        func_echo "enabling shell trace mode"

                        opt_debug='set -x'

                        $opt_debug

;;

      -dlopen)          test "$#" -eq 0 && func_missing_arg "$opt" && break

                        execute_dlfiles="$execute_dlfiles $1"

                        shift

;;

      --dry-run | -n)   opt_dry_run=:                                   ;;

      --features)       func_features                                   ;;

      --finish)         mode="finish"                                   ;;

      --mode)           test "$#" -eq 0 && func_missing_arg "$opt" && break

                        case $1 in

                          # Valid mode arguments:

                          clean)        ;;

                          compile)      ;;

                          execute)      ;;

                          finish)       ;;

                          install)      ;;

                          link)         ;;

                          relink)       ;;

                          uninstall)    ;;

                          # Catch anything else as an error

                          *) func_error "invalid argument for $opt"

                             exit_cmd=exit

                             break

;;

                        esac

                        mode="$1"

                        shift

;;

      --preserve-dup-deps)

                        opt_duplicate_deps=:                            ;;

      --quiet|--silent) preserve_args="$preserve_args $opt"

                        opt_silent=:

;;

      --verbose| -v)    preserve_args="$preserve_args $opt"

                        opt_silent=false

;;

      --tag)            test "$#" -eq 0 && func_missing_arg "$opt" && break

                        preserve_args="$preserve_args $opt $1"

                        func_enable_tag "$1"    # tagname is set here

                        shift

;;

      # Separate optargs to long options:

      -dlopen=*|--mode=*|--tag=*)

                        func_opt_split "$opt"

                        set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}

                        shift

;;

      -\?|-h)           func_usage                                      ;;

      --help)           opt_help=:                                      ;;

      --version)        func_version                                    ;;

      -*)               func_fatal_help "unrecognized option \`$opt'"   ;;

      *)                nonopt="$opt"

                        break

;;

    esac

  done

  case $host in

    *cygwin* | *mingw* | *pw32* | *cegcc*)

      # don't eliminate duplications in $postdeps and $predeps

      opt_duplicate_compiler_generated_deps=:

;;

*)

      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps

;;

  esac

  # Having warned about all mis-specified options, bail out if

  # anything was wrong.

  $exit_cmd $EXIT_FAILURE

# func_check_version_match

# Ensure that we are using m4 macros, and libtool script from the same

# release of libtool.

func_check_version_match ()

  if test "$package_revision" != "$macro_revision"; then

    if test "$VERSION" != "$macro_version"; then

      if test -z "$macro_version"; then

        cat >&2 <<_LT_EOF

$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the

$progname: definition of this LT_INIT comes from an older release.

$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION

$progname: and run autoconf again.

_LT_EOF

      else

        cat >&2 <<_LT_EOF

$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the

$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.

$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION

$progname: and run autoconf again.

_LT_EOF

fi

    else

      cat >&2 <<_LT_EOF

$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,

$progname: but the definition of this LT_INIT comes from revision $macro_revision.

$progname: You should recreate aclocal.m4 with macros from revision $package_revision

$progname: of $PACKAGE $VERSION and run autoconf again.

_LT_EOF

fi

    exit $EXIT_MISMATCH

fi

## ----------- ##

##    Main.    ##

## ----------- ##

$opt_help || {

  # Sanity checks first:

  func_check_version_match

  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then

    func_fatal_configuration "not configured to build any kind of library"

fi

  test -z "$mode" && func_fatal_error "error: you must specify a MODE."

  # Darwin sucks

  eval std_shrext=\"$shrext_cmds\"

  # Only execute mode is allowed to have -dlopen flags.

  if test -n "$execute_dlfiles" && test "$mode" != execute; then

    func_error "unrecognized option \`-dlopen'"

    $ECHO "$help" 1>&2

    exit $EXIT_FAILURE

fi

  # Change the help message to a mode-specific one.

  generic_help="$help"

  help="Try \`$progname --help --mode=$mode' for more information."

# func_lalib_p file

# True iff FILE is a libtool `.la' library or `.lo' object file.

# This function is only a basic sanity check; it will hardly flush out

# determined imposters.

func_lalib_p ()

    test -f "$1" &&

      $SED -e 4q "$1" 2>/dev/null \

        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1

# func_lalib_unsafe_p file

# True iff FILE is a libtool `.la' library or `.lo' object file.

# This function implements the same check as func_lalib_p without

# resorting to external programs.  To this end, it redirects stdin and

# closes it afterwards, without saving the original file descriptor.

# As a safety measure, use it only where a negative result would be

# fatal anyway.  Works if `file' does not exist.

func_lalib_unsafe_p ()

    lalib_p=no

    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then

        for lalib_p_l in 1 2 3 4

do

            read lalib_p_line

            case "$lalib_p_line" in

                \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;

            esac

        done

        exec 0<&5 5<&-

fi

    test "$lalib_p" = yes

# func_ltwrapper_script_p file

# True iff FILE is a libtool wrapper script

# This function is only a basic sanity check; it will hardly flush out

# determined imposters.

func_ltwrapper_script_p ()

    func_lalib_p "$1"

# func_ltwrapper_executable_p file

# True iff FILE is a libtool wrapper executable

# This function is only a basic sanity check; it will hardly flush out

# determined imposters.

func_ltwrapper_executable_p ()

    func_ltwrapper_exec_suffix=

    case $1 in

    *.exe) ;;

    *) func_ltwrapper_exec_suffix=.exe ;;

    esac

    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1

# func_ltwrapper_scriptname file

# Assumes file is an ltwrapper_executable

# uses $file to determine the appropriate filename for a

# temporary ltwrapper_script.

func_ltwrapper_scriptname ()

    func_ltwrapper_scriptname_result=""

    if func_ltwrapper_executable_p "$1"; then

        func_dirname_and_basename "$1" "" "."

        func_stripname '' '.exe' "$func_basename_result"

        func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"

fi

# func_ltwrapper_p file

# True iff FILE is a libtool wrapper script or wrapper executable

# This function is only a basic sanity check; it will hardly flush out

# determined imposters.

func_ltwrapper_p ()

    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"

# func_execute_cmds commands fail_cmd

# Execute tilde-delimited COMMANDS.

# If FAIL_CMD is given, eval that upon failure.

# FAIL_CMD may read-access the current command in variable CMD!

func_execute_cmds ()

    $opt_debug

    save_ifs=$IFS; IFS='~'

    for cmd in $1; do

      IFS=$save_ifs

      eval cmd=\"$cmd\"

      func_show_eval "$cmd" "${2-:}"

    done

    IFS=$save_ifs

# func_source file

# Source FILE, adding directory component if necessary.

# Note that it is not necessary on cygwin/mingw to append a dot to

# FILE even if both FILE and FILE.exe exist: automatic-append-.exe

# behavior happens only for exec(3), not for open(2)!  Also, sourcing

# `FILE.' does not work on cygwin managed mounts.

func_source ()

    $opt_debug

    case $1 in

    */* | *\\*) . "$1" ;;

    *)          . "./$1" ;;

    esac

# func_infer_tag arg

# Infer tagged configuration to use if any are available and

# if one wasn't chosen via the "--tag" command line option.

# Only attempt this if the compiler in the base compile

# command doesn't match the default compiler.

# arg is usually of the form 'gcc ...'

func_infer_tag ()

    $opt_debug

    if test -n "$available_tags" && test -z "$tagname"; then

      CC_quoted=

      for arg in $CC; do

        func_quote_for_eval "$arg"

        CC_quoted="$CC_quoted $func_quote_for_eval_result"

      done

      case $@ in

      # Blanks in the command may have been stripped by the calling shell,

      # but not from the CC environment variable when configure was run.

      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;

      # Blanks at the start of $base_compile will cause this to fail

      # if we don't check for them as well.

*)

        for z in $available_tags; do

          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then

            # Evaluate the configuration.

            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"

            CC_quoted=

            for arg in $CC; do

              # Double-quote args containing other shell metacharacters.

              func_quote_for_eval "$arg"

              CC_quoted="$CC_quoted $func_quote_for_eval_result"

            done

            case "$@ " in

              " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)

              # The compiler in the base compile command matches

              # the one in the tagged configuration.

              # Assume this is the tagged configuration we want.

              tagname=$z

              break

;;

            esac

fi

        done

        # If $tagname still isn't set, then no tagged configuration

        # was found and let the user know that the "--tag" command

        # line option must be used.

        if test -z "$tagname"; then

          func_echo "unable to infer tagged configuration"

          func_fatal_error "specify a tag with \`--tag'"

#       else

#         func_verbose "using $tagname tagged configuration"

fi

;;

      esac

fi

# func_write_libtool_object output_name pic_name nonpic_name

# Create a libtool object file (analogous to a ".la" file),

# but don't create it if we're doing a dry run.

func_write_libtool_object ()

    write_libobj=${1}

    if test "$build_libtool_libs" = yes; then

      write_lobj=\'${2}\'

    else

      write_lobj=none

fi

    if test "$build_old_libs" = yes; then

      write_oldobj=\'${3}\'

    else

      write_oldobj=none

fi

    $opt_dry_run || {

      cat >${write_libobj}T <<EOF

# $write_libobj - a libtool object file

# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION

# Please DO NOT delete this file!

# It is necessary for linking the library.

# Name of the PIC object.

pic_object=$write_lobj

# Name of the non-PIC object

non_pic_object=$write_oldobj

EOF

      $MV "${write_libobj}T" "${write_libobj}"

# func_mode_compile arg...

func_mode_compile ()

    $opt_debug

    # Get the compilation command and the source file.

    base_compile=

    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"

    suppress_opt=yes

    suppress_output=

    arg_mode=normal

    libobj=

    later=

    pie_flag=

    for arg

do

      case $arg_mode in

      arg  )

        # do not "continue".  Instead, add this to base_compile

        lastarg="$arg"

        arg_mode=normal

;;

      target )

        libobj="$arg"

        arg_mode=normal

        continue

;;

      normal )

        # Accept any command-line options.

        case $arg in

-o)

          test -n "$libobj" && \

            func_fatal_error "you cannot specify \`-o' more than once"

          arg_mode=target

          continue

;;

        -pie | -fpie | -fPIE)

          pie_flag="$pie_flag $arg"

          continue

;;

        -shared | -static | -prefer-pic | -prefer-non-pic)

          later="$later $arg"

          continue

;;

        -no-suppress)

          suppress_opt=no

          continue

;;

        -Xcompiler)

          arg_mode=arg  #  the next one goes into the "base_compile" arg list

          continue      #  The current "srcfile" will either be retained or

          ;;            #  replaced later.  I would guess that would be a bug.

        -Wc,*)

          func_stripname '-Wc,' '' "$arg"

          args=$func_stripname_result

          lastarg=

          save_ifs="$IFS"; IFS=','

          for arg in $args; do

            IFS="$save_ifs"

            func_quote_for_eval "$arg"

            lastarg="$lastarg $func_quote_for_eval_result"

          done

          IFS="$save_ifs"

          func_stripname ' ' '' "$lastarg"

          lastarg=$func_stripname_result

          # Add the arguments to base_compile.

          base_compile="$base_compile $lastarg"

          continue

;;

*)

          # Accept the current argument as the source file.

          # The previous "srcfile" becomes the current argument.

          lastarg="$srcfile"

          srcfile="$arg"

;;

        esac  #  case $arg

;;

      esac    #  case $arg_mode

      # Aesthetically quote the previous argument.

      func_quote_for_eval "$lastarg"

      base_compile="$base_compile $func_quote_for_eval_result"

    done # for arg

    case $arg_mode in

    arg)

      func_fatal_error "you must specify an argument for -Xcompile"

;;

    target)

      func_fatal_error "you must specify a target with \`-o'"

;;

*)

      # Get the name of the library object.

      test -z "$libobj" && {

        func_basename "$srcfile"

        libobj="$func_basename_result"

;;

    esac

    # Recognize several different file suffixes.

    # If the user specifies -o file.o, it is replaced with file.lo

    case $libobj in

    *.[cCFSifmso] | \

    *.ada | *.adb | *.ads | *.asm | \

    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \

    *.[fF][09]? | *.for | *.java | *.obj | *.sx)

      func_xform "$libobj"

      libobj=$func_xform_result

;;

    esac

    case $libobj in

    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;

*)

      func_fatal_error "cannot determine name of library object from \`$libobj'"

;;

    esac

    func_infer_tag $base_compile

    for arg in $later; do

      case $arg in

      -shared)

        test "$build_libtool_libs" != yes && \

          func_fatal_configuration "can not build a shared library"

        build_old_libs=no

        continue

;;

      -static)

        build_libtool_libs=no

        build_old_libs=yes

        continue

;;

      -prefer-pic)

        pic_mode=yes

        continue

;;

      -prefer-non-pic)

        pic_mode=no

        continue

;;

      esac

    done

    func_quote_for_eval "$libobj"

    test "X$libobj" != "X$func_quote_for_eval_result" \

      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'    &()|`$[]' \

      && func_warning "libobj name \`$libobj' may not contain shell special characters."

    func_dirname_and_basename "$obj" "/" ""

    objname="$func_basename_result"

    xdir="$func_dirname_result"

    lobj=${xdir}$objdir/$objname

    test -z "$base_compile" && \

      func_fatal_help "you must specify a compilation command"

    # Delete any leftover library objects.

    if test "$build_old_libs" = yes; then

      removelist="$obj $lobj $libobj ${libobj}T"

    else

      removelist="$lobj $libobj ${libobj}T"

fi

    # On Cygwin there's no "real" PIC flag so we must build both object types

    case $host_os in

    cygwin* | mingw* | pw32* | os2* | cegcc*)

      pic_mode=default

;;

    esac

    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then

      # non-PIC code in shared libraries is not supported

      pic_mode=default

fi

    # Calculate the filename of the output object if compiler does

    # not support -o with -c

    if test "$compiler_c_o" = no; then

      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}

      lockfile="$output_obj.lock"

    else

      output_obj=

      need_locks=no

      lockfile=

fi

    # Lock this critical section if it is needed

    # We use this script file to make the link, it avoids creating a new file

    if test "$need_locks" = yes; then

      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do

        func_echo "Waiting for $lockfile to be removed"

        sleep 2

      done

    elif test "$need_locks" = warn; then

      if test -f "$lockfile"; then

        $ECHO "\

*** ERROR, $lockfile exists and contains:

`cat $lockfile 2>/dev/null`

This indicates that another process is trying to use the same

temporary object file, and libtool could not work around it because

your compiler does not support \`-c' and \`-o' together.  If you

repeat this compilation, it may succeed, by chance, but you had better

avoid parallel builds (make -j) in this platform, or get a better

compiler."

        $opt_dry_run || $RM $removelist

        exit $EXIT_FAILURE

fi

      removelist="$removelist $output_obj"

      $ECHO "$srcfile" > "$lockfile"

fi

    $opt_dry_run || $RM $removelist

    removelist="$removelist $lockfile"

    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15

    if test -n "$fix_srcfile_path"; then

      eval srcfile=\"$fix_srcfile_path\"

fi

    func_quote_for_eval "$srcfile"

    qsrcfile=$func_quote_for_eval_result

    # Only build a PIC object if we are building libtool libraries.

    if test "$build_libtool_libs" = yes; then

      # Without this assignment, base_compile gets emptied.

      fbsd_hideous_sh_bug=$base_compile

      if test "$pic_mode" != no; then

        command="$base_compile $qsrcfile $pic_flag"

      else

        # Don't build PIC code

        command="$base_compile $qsrcfile"

fi

      func_mkdir_p "$xdir$objdir"

      if test -z "$output_obj"; then

        # Place PIC objects in $objdir

        command="$command -o $lobj"

fi

      func_show_eval_locale "$command"  \

          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'

      if test "$need_locks" = warn &&

         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then

        $ECHO "\

*** ERROR, $lockfile contains:

`cat $lockfile 2>/dev/null`

but it should contain:

$srcfile

This indicates that another process is trying to use the same

temporary object file, and libtool could not work around it because

your compiler does not support \`-c' and \`-o' together.  If you

repeat this compilation, it may succeed, by chance, but you had better

avoid parallel builds (make -j) in this platform, or get a better

compiler."

        $opt_dry_run || $RM $removelist

        exit $EXIT_FAILURE

fi

      # Just move the object if needed, then go on to compile the next one

      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then

        func_show_eval '$MV "$output_obj" "$lobj"' \

          'error=$?; $opt_dry_run || $RM $removelist; exit $error'

fi

      # Allow error messages only from the first compilation.

      if test "$suppress_opt" = yes; then

        suppress_output=' >/dev/null 2>&1'

fi

fi

    # Only build a position-dependent object if we build old libraries.

    if test "$build_old_libs" = yes; then

      if test "$pic_mode" != yes; then

        # Don't build PIC code

        command="$base_compile $qsrcfile$pie_flag"

      else

        command="$base_compile $qsrcfile $pic_flag"

fi

      if test "$compiler_c_o" = yes; then

        command="$command -o $obj"

fi

      # Suppress compiler output if we already did a PIC compilation.

      command="$command$suppress_output"

      func_show_eval_locale "$command" \

        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'

      if test "$need_locks" = warn &&

         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then

        $ECHO "\

*** ERROR, $lockfile contains:

`cat $lockfile 2>/dev/null`

but it should contain:

$srcfile

This indicates that another process is trying to use the same

temporary object file, and libtool could not work around it because

your compiler does not support \`-c' and \`-o' together.  If you

repeat this compilation, it may succeed, by chance, but you had better

avoid parallel builds (make -j) in this platform, or get a better

compiler."

        $opt_dry_run || $RM $removelist

        exit $EXIT_FAILURE

fi

      # Just move the object if needed

      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then

        func_show_eval '$MV "$output_obj" "$obj"' \

          'error=$?; $opt_dry_run || $RM $removelist; exit $error'

fi

fi

    $opt_dry_run || {

      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"

      # Unlock the critical section if it was locked

      if test "$need_locks" != no; then

        removelist=$lockfile

        $RM "$lockfile"

fi

    exit $EXIT_SUCCESS

$opt_help || {

test "$mode" = compile && func_mode_compile ${1+"$@"}

func_mode_help ()

    # We need to display help for each of the modes.

    case $mode in

"")

        # Generic help is extracted from the usage comments

        # at the start of this file.

        func_help

;;

      clean)

        $ECHO \

"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...

Remove files from the build directory.

RM is the name of the program to use to delete files associated with each FILE

(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed

to RM.

If FILE is a libtool library, object or program, all the files associated

with it are deleted. Otherwise, only FILE itself is deleted using RM."

;;

      compile)

      $ECHO \

"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE

Compile a source file into a libtool library object.

This mode accepts the following additional options:

  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE

  -no-suppress      do not suppress compiler output for multiple passes

  -prefer-pic       try to building PIC objects only

  -prefer-non-pic   try to building non-PIC objects only

  -shared           do not build a \`.o' file suitable for static linking

  -static           only build a \`.o' file suitable for static linking

COMPILE-COMMAND is a command to be used in creating a \`standard' object file

from the given SOURCEFILE.

The output file name is determined by removing the directory component from

SOURCEFILE, then substituting the C source code suffix \`.c' with the

library object suffix, \`.lo'."

;;

      execute)

        $ECHO \

"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...

Automatically set library path, then run a program.

This mode accepts the following additional options:

  -dlopen FILE      add the directory containing FILE to the library path

This mode sets the library path environment variable according to \`-dlopen'

flags.

If any of the ARGS are libtool executable wrappers, then they are translated

into their corresponding uninstalled binary, and any of their required library

directories are added to the library path.

Then, COMMAND is executed, with ARGS as arguments."

;;

      finish)

        $ECHO \

"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...

Complete the installation of libtool libraries.

Each LIBDIR is a directory that contains libtool libraries.

The commands that this mode executes may require superuser privileges.  Use

the \`--dry-run' option if you just want to see what would be executed."

;;

      install)

        $ECHO \

"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...

Install executables or libraries.

INSTALL-COMMAND is the installation command.  The first component should be

either the \`install' or \`cp' program.

The following components of INSTALL-COMMAND are treated specially:

  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation

The rest of the components are interpreted as arguments to that command (only

BSD-compatible install options are recognized)."

;;

      link)

        $ECHO \

"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...

Link object files or libraries together to form another library, or to

create an executable program.

LINK-COMMAND is a command using the C compiler that you would use to create

a program from several object files.

The following components of LINK-COMMAND are treated specially:

  -all-static       do not do any dynamic linking at all

  -avoid-version    do not add a version suffix if possible

  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime

  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols

  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)

  -export-symbols SYMFILE

                    try to export only the symbols listed in SYMFILE

  -export-symbols-regex REGEX

                    try to export only the symbols matching REGEX

  -LLIBDIR          search LIBDIR for required installed libraries

  -lNAME            OUTPUT-FILE requires the installed library libNAME

  -module           build a library that can dlopened

  -no-fast-install  disable the fast-install mode

  -no-install       link a not-installable executable

  -no-undefined     declare that a library does not refer to external symbols

  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects

  -objectlist FILE  Use a list of object files found in FILE to specify objects

  -precious-files-regex REGEX

                    don't remove output files matching REGEX

  -release RELEASE  specify package release information

  -rpath LIBDIR     the created library will eventually be installed in LIBDIR

  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries

  -shared           only do dynamic linking of libtool libraries

  -shrext SUFFIX    override the standard shared library file extension

  -static           do not do any dynamic linking of uninstalled libtool libraries

  -static-libtool-libs

                    do not do any dynamic linking of libtool libraries

  -version-info CURRENT[:REVISION[:AGE]]

                    specify library version info [each variable defaults to 0]

  -weak LIBNAME     declare that the target provides the LIBNAME interface

All other options (arguments beginning with \`-') are ignored.

Every other argument is treated as a filename.  Files ending in \`.la' are

treated as uninstalled libtool libraries, other files are standard or library

object files.

If the OUTPUT-FILE ends in \`.la', then a libtool library is created,

only library objects (\`.lo' files) may be specified, and \`-rpath' is

required, except when creating a convenience library.

If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created

using \`ar' and \`ranlib', or on Windows using \`lib'.

If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file

is created, otherwise an executable program is created."

;;

      uninstall)

        $ECHO \

"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...

Remove libraries from an installation directory.

RM is the name of the program to use to delete files associated with each FILE

(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed

to RM.

If FILE is a libtool library, all the files associated with it are deleted.

Otherwise, only FILE itself is deleted using RM."

;;

*)

        func_fatal_help "invalid operation mode \`$mode'"

;;

    esac

    $ECHO

    $ECHO "Try \`$progname --help' for more information about other modes."

    exit $?

  # Now that we've collected a possible --mode arg, show help if necessary

  $opt_help && func_mode_help

# func_mode_execute arg...

func_mode_execute ()

    $opt_debug

    # The first argument is the command name.

    cmd="$nonopt"

    test -z "$cmd" && \

      func_fatal_help "you must specify a COMMAND"

    # Handle -dlopen flags immediately.

    for file in $execute_dlfiles; do

      test -f "$file" \

        || func_fatal_help "\`$file' is not a file"

      dir=

      case $file in

      *.la)

        # Check to see that this really is a libtool archive.

        func_lalib_unsafe_p "$file" \

          || func_fatal_help "\`$lib' is not a valid libtool archive"

        # Read the libtool library.

        dlname=

        library_names=

        func_source "$file"

        # Skip this library if it cannot be dlopened.

        if test -z "$dlname"; then

          # Warn if it was a shared library.

          test -n "$library_names" && \

            func_warning "\`$file' was not linked with \`-export-dynamic'"

          continue

fi

        func_dirname "$file" "" "."

        dir="$func_dirname_result"

        if test -f "$dir/$objdir/$dlname"; then

          dir="$dir/$objdir"

        else

          if test ! -f "$dir/$dlname"; then

            func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"

fi

fi

;;

      *.lo)

        # Just add the directory containing the .lo file.

        func_dirname "$file" "" "."

        dir="$func_dirname_result"

;;

*)

        func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"

        continue

;;

      esac

      # Get the absolute pathname.

      absdir=`cd "$dir" && pwd`

      test -n "$absdir" && dir="$absdir"

      # Now add the directory to shlibpath_var.

      if eval "test -z \"\$$shlibpath_var\""; then

        eval "$shlibpath_var=\"\$dir\""

      else

        eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""

fi

    done

    # This variable tells wrapper scripts just to set shlibpath_var

    # rather than running their programs.

    libtool_execute_magic="$magic"

    # Check if any of the arguments is a wrapper script.

    args=

    for file

do

      case $file in

      -*) ;;

*)

        # Do a test to see if this is really a libtool program.

        if func_ltwrapper_script_p "$file"; then

          func_source "$file"

          # Transform arg to wrapped name.

          file="$progdir/$program"

        elif func_ltwrapper_executable_p "$file"; then

          func_ltwrapper_scriptname "$file"

          func_source "$func_ltwrapper_scriptname_result"

          # Transform arg to wrapped name.

          file="$progdir/$program"

fi

;;

      esac

      # Quote arguments (to preserve shell metacharacters).

      func_quote_for_eval "$file"

      args="$args $func_quote_for_eval_result"

    done

    if test "X$opt_dry_run" = Xfalse; then

      if test -n "$shlibpath_var"; then

        # Export the shlibpath_var.

        eval "export $shlibpath_var"

fi

      # Restore saved environment variables

      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES

do

        eval "if test \"\${save_$lt_var+set}\" = set; then

                $lt_var=\$save_$lt_var; export $lt_var

              else

                $lt_unset $lt_var

fi"

      done

      # Now prepare to actually exec the command.

      exec_cmd="\$cmd$args"

    else

      # Display what would be done.

      if test -n "$shlibpath_var"; then

        eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""

        $ECHO "export $shlibpath_var"

fi

      $ECHO "$cmd$args"

      exit $EXIT_SUCCESS

fi

test "$mode" = execute && func_mode_execute ${1+"$@"}

# func_mode_finish arg...

func_mode_finish ()

    $opt_debug

    libdirs="$nonopt"

    admincmds=

    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then

      for dir

do

        libdirs="$libdirs $dir"

      done

      for libdir in $libdirs; do

        if test -n "$finish_cmds"; then

          # Do each command in the finish commands.

          func_execute_cmds "$finish_cmds" 'admincmds="$admincmds

'"$cmd"'"'

fi

        if test -n "$finish_eval"; then

          # Do the single finish_eval.

          eval cmds=\"$finish_eval\"

          $opt_dry_run || eval "$cmds" || admincmds="$admincmds

       $cmds"

fi

      done

fi

    # Exit here if they wanted silent mode.

    $opt_silent && exit $EXIT_SUCCESS

    $ECHO "X----------------------------------------------------------------------" | $Xsed

    $ECHO "Libraries have been installed in:"

    for libdir in $libdirs; do

      $ECHO "   $libdir"

    done

    $ECHO

    $ECHO "If you ever happen to want to link against installed libraries"

    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"

    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"

    $ECHO "flag during linking and do at least one of the following:"

    if test -n "$shlibpath_var"; then

      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"

      $ECHO "     during execution"

fi

    if test -n "$runpath_var"; then

      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"

      $ECHO "     during linking"

fi

    if test -n "$hardcode_libdir_flag_spec"; then

      libdir=LIBDIR

      eval flag=\"$hardcode_libdir_flag_spec\"

      $ECHO "   - use the \`$flag' linker flag"

fi

    if test -n "$admincmds"; then

      $ECHO "   - have your system administrator run these commands:$admincmds"

fi

    if test -f /etc/ld.so.conf; then

      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"

fi

    $ECHO

    $ECHO "See any operating system documentation about shared libraries for"

    case $host in

      solaris2.[6789]|solaris2.1[0-9])

        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"

        $ECHO "pages."

;;

*)

        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."

;;

    esac

    $ECHO "X----------------------------------------------------------------------" | $Xsed

    exit $EXIT_SUCCESS

test "$mode" = finish && func_mode_finish ${1+"$@"}

# func_mode_install arg...

func_mode_install ()

    $opt_debug

    # There may be an optional sh(1) argument at the beginning of

    # install_prog (especially on Windows NT).

    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||

       # Allow the use of GNU shtool's install command.

       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then

      # Aesthetically quote it.

      func_quote_for_eval "$nonopt"

      install_prog="$func_quote_for_eval_result "

      arg=$1

      shift

    else

      install_prog=

      arg=$nonopt

fi

    # The real first argument should be the name of the installation program.

    # Aesthetically quote it.

    func_quote_for_eval "$arg"

    install_prog="$install_prog$func_quote_for_eval_result"

    # We need to accept at least all the BSD install flags.

    dest=

    files=

    opts=

    prev=

    install_type=

    isdir=no

    stripme=

    for arg

do

      if test -n "$dest"; then

        files="$files $dest"

        dest=$arg

        continue

fi

      case $arg in

      -d) isdir=yes ;;

-f)

        case " $install_prog " in

        *[\\\ /]cp\ *) ;;

        *) prev=$arg ;;

        esac

;;

      -g | -m | -o)

        prev=$arg

;;

-s)

        stripme=" -s"

        continue

;;

-*)

;;

*)

        # If the previous option needed an argument, then skip it.

        if test -n "$prev"; then

          prev=

        else

          dest=$arg

          continue

fi

;;

      esac

      # Aesthetically quote the argument.

      func_quote_for_eval "$arg"

      install_prog="$install_prog $func_quote_for_eval_result"

    done

    test -z "$install_prog" && \

      func_fatal_help "you must specify an install program"

    test -n "$prev" && \

      func_fatal_help "the \`$prev' option requires an argument"

    if test -z "$files"; then

      if test -z "$dest"; then

        func_fatal_help "no file or destination specified"

      else

        func_fatal_help "you must specify a destination"

fi

fi

    # Strip any trailing slash from the destination.

    func_stripname '' '/' "$dest"

    dest=$func_stripname_result

    # Check to see that the destination is a directory.

    test -d "$dest" && isdir=yes

    if test "$isdir" = yes; then

      destdir="$dest"

      destname=

    else

      func_dirname_and_basename "$dest" "" "."

      destdir="$func_dirname_result"

      destname="$func_basename_result"

      # Not a directory, so check to see that there is only one file specified.

      set dummy $files; shift

      test "$#" -gt 1 && \

        func_fatal_help "\`$dest' is not a directory"

fi

    case $destdir in

    [\\/]* | [A-Za-z]:[\\/]*) ;;

*)

      for file in $files; do

        case $file in

        *.lo) ;;

*)

          func_fatal_help "\`$destdir' must be an absolute directory name"

;;

        esac

      done

;;

    esac

    # This variable tells wrapper scripts just to set variables rather

    # than running their programs.

    libtool_install_magic="$magic"

    staticlibs=

    future_libdirs=

    current_libdirs=

    for file in $files; do

      # Do each installation.

      case $file in

      *.$libext)

        # Do the static libraries later.

        staticlibs="$staticlibs $file"

;;

      *.la)

        # Check to see that this really is a libtool archive.

        func_lalib_unsafe_p "$file" \

          || func_fatal_help "\`$file' is not a valid libtool archive"

        library_names=

        old_library=

        relink_command=

        func_source "$file"

        # Add the libdir to current_libdirs if it is the destination.

        if test "X$destdir" = "X$libdir"; then

          case "$current_libdirs " in

          *" $libdir "*) ;;

          *) current_libdirs="$current_libdirs $libdir" ;;

          esac

        else

          # Note the libdir as a future libdir.

          case "$future_libdirs " in

          *" $libdir "*) ;;

          *) future_libdirs="$future_libdirs $libdir" ;;

          esac

fi

        func_dirname "$file" "/" ""

        dir="$func_dirname_result"

        dir="$dir$objdir"

        if test -n "$relink_command"; then

          # Determine the prefix the user has applied to our future dir.

          inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`

          # Don't allow the user to place us outside of our expected

          # location b/c this prevents finding dependent libraries that

          # are installed to the same prefix.

          # At present, this check doesn't affect windows .dll's that

          # are installed into $libdir/../bin (currently, that works fine)

          # but it's something to keep an eye on.

          test "$inst_prefix_dir" = "$destdir" && \

            func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"

          if test -n "$inst_prefix_dir"; then

            # Stick the inst_prefix_dir data into the link command.

            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`

          else

            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`

fi

          func_warning "relinking \`$file'"

          func_show_eval "$relink_command" \

            'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'

fi

        # See the names of the shared library.

        set dummy $library_names; shift

        if test -n "$1"; then

          realname="$1"

          shift

          srcname="$realname"

          test -n "$relink_command" && srcname="$realname"T

          # Install the shared library and build the symlinks.

          func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \

              'exit $?'

          tstripme="$stripme"

          case $host_os in

          cygwin* | mingw* | pw32* | cegcc*)

            case $realname in

            *.dll.a)

              tstripme=""

;;

            esac

;;

          esac

          if test -n "$tstripme" && test -n "$striplib"; then

            func_show_eval "$striplib $destdir/$realname" 'exit $?'

fi

          if test "$#" -gt 0; then

            # Delete the old symlinks, and create new ones.

            # Try `ln -sf' first, because the `ln' binary might depend on

            # the symlink we replace!  Solaris /bin/ln does not understand -f,

            # so we also need to try rm && ln -s.

            for linkname

do

              test "$linkname" != "$realname" \

                && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"

            done

fi

          # Do each command in the postinstall commands.

          lib="$destdir/$realname"

          func_execute_cmds "$postinstall_cmds" 'exit $?'

fi

        # Install the pseudo-library for information purposes.

        func_basename "$file"

        name="$func_basename_result"

        instname="$dir/$name"i

        func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'

        # Maybe install the static library, too.

        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"

;;

      *.lo)

        # Install (i.e. copy) a libtool object.

        # Figure out destination file name, if it wasn't already specified.

        if test -n "$destname"; then

          destfile="$destdir/$destname"

        else

          func_basename "$file"

          destfile="$func_basename_result"

          destfile="$destdir/$destfile"

fi

        # Deduce the name of the destination old-style object file.

        case $destfile in

        *.lo)

          func_lo2o "$destfile"

          staticdest=$func_lo2o_result

;;

        *.$objext)

          staticdest="$destfile"

          destfile=

;;

*)

          func_fatal_help "cannot copy a libtool object to \`$destfile'"

;;

        esac

        # Install the libtool object if requested.

        test -n "$destfile" && \

          func_show_eval "$install_prog $file $destfile" 'exit $?'

        # Install the old object if enabled.

        if test "$build_old_libs" = yes; then

          # Deduce the name of the old-style object file.

          func_lo2o "$file"

          staticobj=$func_lo2o_result

          func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'

fi

        exit $EXIT_SUCCESS

;;

*)

        # Figure out destination file name, if it wasn't already specified.

        if test -n "$destname"; then

          destfile="$destdir/$destname"

        else

          func_basename "$file"

          destfile="$func_basename_result"

          destfile="$destdir/$destfile"

fi

        # If the file is missing, and there is a .exe on the end, strip it

        # because it is most likely a libtool script we actually want to

        # install

        stripped_ext=""

        case $file in

          *.exe)

            if test ! -f "$file"; then

              func_stripname '' '.exe' "$file"

              file=$func_stripname_result

              stripped_ext=".exe"

fi

;;

        esac

        # Do a test to see if this is really a libtool program.

        case $host in

        *cygwin* | *mingw*)

            if func_ltwrapper_executable_p "$file"; then

              func_ltwrapper_scriptname "$file"

              wrapper=$func_ltwrapper_scriptname_result

            else

              func_stripname '' '.exe' "$file"

              wrapper=$func_stripname_result

fi

;;

*)

            wrapper=$file

;;

        esac

        if func_ltwrapper_script_p "$wrapper"; then

          notinst_deplibs=

          relink_command=

          func_source "$wrapper"

          # Check the variables that should have been set.

          test -z "$generated_by_libtool_version" && \

            func_fatal_error "invalid libtool wrapper script \`$wrapper'"

          finalize=yes

          for lib in $notinst_deplibs; do

            # Check to see that each library is installed.

            libdir=

            if test -f "$lib"; then

              func_source "$lib"

fi

            libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test

            if test -n "$libdir" && test ! -f "$libfile"; then

              func_warning "\`$lib' has not been installed in \`$libdir'"

              finalize=no

fi

          done

          relink_command=

          func_source "$wrapper"

          outputname=

          if test "$fast_install" = no && test -n "$relink_command"; then

            $opt_dry_run || {

              if test "$finalize" = yes; then

                tmpdir=`func_mktempdir`

                func_basename "$file$stripped_ext"

                file="$func_basename_result"

                outputname="$tmpdir/$file"

                # Replace the output file specification.

                relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`

                $opt_silent || {

                  func_quote_for_expand "$relink_command"

                  eval "func_echo $func_quote_for_expand_result"

                if eval "$relink_command"; then :

                  else

                  func_error "error: relink \`$file' with the above command before installing it"

                  $opt_dry_run || ${RM}r "$tmpdir"

                  continue

fi

                file="$outputname"

              else

                func_warning "cannot relink \`$file'"

fi

          else

            # Install the binary that we compiled earlier.

            file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`

fi

fi

        # remove .exe since cygwin /usr/bin/install will append another

        # one anyway

        case $install_prog,$host in

        */usr/bin/install*,*cygwin*)

          case $file:$destfile in

          *.exe:*.exe)

            # this is ok

;;

          *.exe:*)

            destfile=$destfile.exe

;;

          *:*.exe)

            func_stripname '' '.exe' "$destfile"

            destfile=$func_stripname_result

;;

          esac

;;

        esac

        func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'

        $opt_dry_run || if test -n "$outputname"; then

          ${RM}r "$tmpdir"

fi

;;

      esac

    done

    for file in $staticlibs; do

      func_basename "$file"

      name="$func_basename_result"

      # Set up the ranlib parameters.

      oldlib="$destdir/$name"

      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'

      if test -n "$stripme" && test -n "$old_striplib"; then

        func_show_eval "$old_striplib $oldlib" 'exit $?'

fi

      # Do each command in the postinstall commands.

      func_execute_cmds "$old_postinstall_cmds" 'exit $?'

    done

    test -n "$future_libdirs" && \

      func_warning "remember to run \`$progname --finish$future_libdirs'"

    if test -n "$current_libdirs"; then

      # Maybe just do a dry run.

      $opt_dry_run && current_libdirs=" -n$current_libdirs"

      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'

    else

      exit $EXIT_SUCCESS

fi

test "$mode" = install && func_mode_install ${1+"$@"}

# func_generate_dlsyms outputname originator pic_p

# Extract symbols from dlprefiles and create ${outputname}S.o with

# a dlpreopen symbol table.

func_generate_dlsyms ()

    $opt_debug

    my_outputname="$1"

    my_originator="$2"

    my_pic_p="${3-no}"

    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`

    my_dlsyms=

    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then

      if test -n "$NM" && test -n "$global_symbol_pipe"; then

        my_dlsyms="${my_outputname}S.c"

      else

        func_error "not configured to extract global symbols from dlpreopened files"

fi

fi

    if test -n "$my_dlsyms"; then

      case $my_dlsyms in

      "") ;;

      *.c)

        # Discover the nlist of each of the dlfiles.

        nlist="$output_objdir/${my_outputname}.nm"

        func_show_eval "$RM $nlist ${nlist}S ${nlist}T"

        # Parse the name list into a source file.

        func_verbose "creating $output_objdir/$my_dlsyms"

        $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\

/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */

/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */

#ifdef __cplusplus

extern \"C\" {

#endif

/* External symbol declarations for the compiler. */\

        if test "$dlself" = yes; then

          func_verbose "generating symbol list for \`$output'"

          $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"

          # Add our own program objects to the symbol list.

          progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`

          for progfile in $progfiles; do

            func_verbose "extracting global C symbols from \`$progfile'"

            $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"

          done

          if test -n "$exclude_expsyms"; then

            $opt_dry_run || {

              eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'

              eval '$MV "$nlist"T "$nlist"'

fi

          if test -n "$export_symbols_regex"; then

            $opt_dry_run || {

              eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'

              eval '$MV "$nlist"T "$nlist"'

fi

          # Prepare the list of exported symbols

          if test -z "$export_symbols"; then

            export_symbols="$output_objdir/$outputname.exp"

            $opt_dry_run || {

              $RM $export_symbols

              eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'

              case $host in

              *cygwin* | *mingw* | *cegcc* )

                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'

                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'

;;

              esac

          else

            $opt_dry_run || {

              eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'

              eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'

              eval '$MV "$nlist"T "$nlist"'

              case $host in

                *cygwin | *mingw* | *cegcc* )

                  eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'

                  eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'

;;

              esac

fi

fi

        for dlprefile in $dlprefiles; do

          func_verbose "extracting global C symbols from \`$dlprefile'"

          func_basename "$dlprefile"

          name="$func_basename_result"

          $opt_dry_run || {

            eval '$ECHO ": $name " >> "$nlist"'

            eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"

        done

        $opt_dry_run || {

          # Make sure we have at least an empty file.

          test -f "$nlist" || : > "$nlist"

          if test -n "$exclude_expsyms"; then

            $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T

            $MV "$nlist"T "$nlist"

fi

          # Try sorting and uniquifying the output.

          if $GREP -v "^: " < "$nlist" |

              if sort -k 3 </dev/null >/dev/null 2>&1; then

                sort -k 3

              else

                sort +2

              fi |

              uniq > "$nlist"S; then

          else

            $GREP -v "^: " < "$nlist" > "$nlist"S

fi

          if test -f "$nlist"S; then

            eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'

          else

            $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"

fi

          $ECHO >> "$output_objdir/$my_dlsyms" "\

/* The mapping between symbol names and symbols.  */

typedef struct {

  const char *name;

  void *address;

} lt_dlsymlist;

          case $host in

          *cygwin* | *mingw* | *cegcc* )

            $ECHO >> "$output_objdir/$my_dlsyms" "\

/* DATA imports from DLLs on WIN32 con't be const, because

   runtime relocations are performed -- see ld's documentation

   on pseudo-relocs.  */"

            lt_dlsym_const= ;;

          *osf5*)

            echo >> "$output_objdir/$my_dlsyms" "\

/* This system does not cope well with relocations in const data */"

            lt_dlsym_const= ;;

*)

            lt_dlsym_const=const ;;

          esac

          $ECHO >> "$output_objdir/$my_dlsyms" "\

extern $lt_dlsym_const lt_dlsymlist

lt_${my_prefix}_LTX_preloaded_symbols[];

$lt_dlsym_const lt_dlsymlist

lt_${my_prefix}_LTX_preloaded_symbols[] =

{\

  { \"$my_originator\", (void *) 0 },"

          case $need_lib_prefix in

no)

            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"

;;

*)

            eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"

;;

          esac

          $ECHO >> "$output_objdir/$my_dlsyms" "\

  {0, (void *) 0}

};

/* This works around a problem in FreeBSD linker */

#ifdef FREEBSD_WORKAROUND

static const void *lt_preloaded_setup() {

  return lt_${my_prefix}_LTX_preloaded_symbols;

#endif

#ifdef __cplusplus

#endif\

        } # !$opt_dry_run

        pic_flag_for_symtable=

        case "$compile_command " in

        *" -static "*) ;;

*)

          case $host in

          # compiling the symbol table file with pic_flag works around

          # a FreeBSD bug that causes programs to crash when -lm is

          # linked before any other PIC object.  But we must not use

          # pic_flag when linking with -static.  The problem exists in

          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.

          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)

            pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;

          *-*-hpux*)

            pic_flag_for_symtable=" $pic_flag"  ;;

*)

            if test "X$my_pic_p" != Xno; then

              pic_flag_for_symtable=" $pic_flag"

fi

;;

          esac

;;

        esac

        symtab_cflags=

        for arg in $LTCFLAGS; do

          case $arg in

          -pie | -fpie | -fPIE) ;;

          *) symtab_cflags="$symtab_cflags $arg" ;;

          esac

        done

        # Now compile the dynamic symbol file.

        func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'

        # Clean up the generated files.

        func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'

        # Transform the symbol file into the correct name.

        symfileobj="$output_objdir/${my_outputname}S.$objext"

        case $host in

        *cygwin* | *mingw* | *cegcc* )

          if test -f "$output_objdir/$my_outputname.def"; then

            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`

            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`

          else

            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`

            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`

fi

;;

*)

          compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`

          finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`

;;

        esac

;;

*)

        func_fatal_error "unknown suffix for \`$my_dlsyms'"

;;

      esac

    else

      # We keep going just in case the user didn't refer to

      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe

      # really was required.

      # Nullify the symbol file.

      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`

      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`

fi

# func_win32_libid arg

# return the library type of file 'arg'

# Need a lot of goo to handle *both* DLLs and import libs

# Has to be a shell function in order to 'eat' the argument

# that is supplied when $file_magic_command is called.

func_win32_libid ()

  $opt_debug

  win32_libid_type="unknown"

  win32_fileres=`file -L $1 2>/dev/null`

  case $win32_fileres in

  *ar\ archive\ import\ library*) # definitely import

    win32_libid_type="x86 archive import"

;;

  *ar\ archive*) # could be an import, or static

    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |

       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then

      win32_nmres=`eval $NM -f posix -A $1 |

        $SED -n -e '

            1,100{

                / I /{

                    s,.*,import,

}'`

      case $win32_nmres in

      import*)  win32_libid_type="x86 archive import";;

      *)        win32_libid_type="x86 archive static";;

      esac

fi

;;

  *DLL*)

    win32_libid_type="x86 DLL"

;;

  *executable*) # but shell scripts are "executable" too...

    case $win32_fileres in

    *MS\ Windows\ PE\ Intel*)

      win32_libid_type="x86 DLL"

;;

    esac

;;

  esac

  $ECHO "$win32_libid_type"

# func_extract_an_archive dir oldlib

func_extract_an_archive ()

    $opt_debug

    f_ex_an_ar_dir="$1"; shift

    f_ex_an_ar_oldlib="$1"

    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'

    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then

    else

      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"

fi

# func_extract_archives gentop oldlib ...

func_extract_archives ()

    $opt_debug

    my_gentop="$1"; shift

    my_oldlibs=${1+"$@"}

    my_oldobjs=""

    my_xlib=""

    my_xabs=""

    my_xdir=""

    for my_xlib in $my_oldlibs; do

      # Extract the objects.

      case $my_xlib in

        [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;

        *) my_xabs=`pwd`"/$my_xlib" ;;

      esac

      func_basename "$my_xlib"

      my_xlib="$func_basename_result"

      my_xlib_u=$my_xlib

      while :; do

        case " $extracted_archives " in

        *" $my_xlib_u "*)

          func_arith $extracted_serial + 1

          extracted_serial=$func_arith_result

          my_xlib_u=lt$extracted_serial-$my_xlib ;;

        *) break ;;

        esac

      done

      extracted_archives="$extracted_archives $my_xlib_u"

      my_xdir="$my_gentop/$my_xlib_u"

      func_mkdir_p "$my_xdir"

      case $host in

      *-darwin*)

        func_verbose "Extracting $my_xabs"

        # Do not bother doing anything if just a dry run

        $opt_dry_run || {

          darwin_orig_dir=`pwd`

          cd $my_xdir || exit $?

          darwin_archive=$my_xabs

          darwin_curdir=`pwd`

          darwin_base_archive=`basename "$darwin_archive"`

          darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`

          if test -n "$darwin_arches"; then

            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`

            darwin_arch=

            func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"

            for darwin_arch in  $darwin_arches ; do

              func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"

              $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"

              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"

              func_extract_an_archive "`pwd`" "${darwin_base_archive}"

              cd "$darwin_curdir"

              $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"

            done # $darwin_arches

            ## Okay now we've a bunch of thin objects, gotta fatten them up :)

            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`

            darwin_file=

            darwin_files=

            for darwin_file in $darwin_filelist; do

              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`

              $LIPO -create -output "$darwin_file" $darwin_files

            done # $darwin_filelist

            $RM -rf unfat-$$

            cd "$darwin_orig_dir"

          else

            cd $darwin_orig_dir

            func_extract_an_archive "$my_xdir" "$my_xabs"

          fi # $darwin_arches

        } # !$opt_dry_run

;;

*)

        func_extract_an_archive "$my_xdir" "$my_xabs"

;;

      esac

      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`

    done

    func_extract_archives_result="$my_oldobjs"

# func_emit_wrapper_part1 [arg=no]

# Emit the first part of a libtool wrapper script on stdout.

# For more information, see the description associated with

# func_emit_wrapper(), below.

func_emit_wrapper_part1 ()

        func_emit_wrapper_part1_arg1=no

        if test -n "$1" ; then

          func_emit_wrapper_part1_arg1=$1

fi

        $ECHO "\

#! $SHELL

# $output - temporary wrapper script for $objdir/$outputname

# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION

# The $output program cannot be directly executed until all the libtool

# libraries that it depends on are installed.

# This wrapper script should never be moved out of the build directory.

# If it is, it will not operate correctly.

# Sed substitution that helps us do robust quoting.  It backslashifies

# metacharacters that are still active within double-quoted strings.

Xsed='${SED} -e 1s/^X//'

sed_quote_subst='$sed_quote_subst'

# Be Bourne compatible

if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then

  emulate sh

  NULLCMD=:

  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which

  # is contrary to our usage.  Disable this feature.

  alias -g '\${1+\"\$@\"}'='\"\$@\"'

  setopt NO_GLOB_SUBST

else

  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac

fi

BIN_SH=xpg4; export BIN_SH # for Tru64

DUALCASE=1; export DUALCASE # for MKS sh

# The HP-UX ksh and POSIX shell print the target directory to stdout

# if CDPATH is set.

(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

relink_command=\"$relink_command\"

# This environment variable determines our operation mode.

if test \"\$libtool_install_magic\" = \"$magic\"; then

  # install mode needs the following variables:

  generated_by_libtool_version='$macro_version'

  notinst_deplibs='$notinst_deplibs'

else

  # When we are sourced in execute mode, \$file and \$ECHO are already set.

  if test \"\$libtool_execute_magic\" != \"$magic\"; then

    ECHO=\"$qecho\"

    file=\"\$0\"

    # Make sure echo works.

    if test \"X\$1\" = X--no-reexec; then

      # Discard the --no-reexec flag, and continue.

      shift

    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then

      # Yippee, \$ECHO works!

    else

      # Restart under the correct shell, and then maybe \$ECHO will work.

      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}

fi

fi\

        $ECHO "\

  # Find the directory that this script lives in.

  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`

  test \"x\$thisdir\" = \"x\$file\" && thisdir=.

  # Follow symbolic links until we get to the real thisdir.

  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`

  while test -n \"\$file\"; do

    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`

    # If there was a directory component, then change thisdir.

    if test \"x\$destdir\" != \"x\$file\"; then

      case \"\$destdir\" in

      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;

      *) thisdir=\"\$thisdir/\$destdir\" ;;

      esac

fi

    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`

    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`

  done

# end: func_emit_wrapper_part1

# func_emit_wrapper_part2 [arg=no]

# Emit the second part of a libtool wrapper script on stdout.

# For more information, see the description associated with

# func_emit_wrapper(), below.

func_emit_wrapper_part2 ()

        func_emit_wrapper_part2_arg1=no

        if test -n "$1" ; then

          func_emit_wrapper_part2_arg1=$1

fi

        $ECHO "\

  # Usually 'no', except on cygwin/mingw when embedded into

  # the cwrapper.

  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1

  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then

    # special case for '.'

    if test \"\$thisdir\" = \".\"; then

      thisdir=\`pwd\`

fi

    # remove .libs from thisdir

    case \"\$thisdir\" in

    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;

    $objdir )   thisdir=. ;;

    esac

fi

  # Try to get the absolute directory name.

  absdir=\`cd \"\$thisdir\" && pwd\`

  test -n \"\$absdir\" && thisdir=\"\$absdir\"

        if test "$fast_install" = yes; then

          $ECHO "\

  program=lt-'$outputname'$exeext

  progdir=\"\$thisdir/$objdir\"

  if test ! -f \"\$progdir/\$program\" ||

     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\

       test \"X\$file\" != \"X\$progdir/\$program\"; }; then

    file=\"\$\$-\$program\"

    if test ! -d \"\$progdir\"; then

      $MKDIR \"\$progdir\"

    else

      $RM \"\$progdir/\$file\"

fi"

          $ECHO "\

    # relink executable if necessary

    if test -n \"\$relink_command\"; then

      if relink_command_output=\`eval \$relink_command 2>&1\`; then :

      else

        $ECHO \"\$relink_command_output\" >&2

        $RM \"\$progdir/\$file\"

        exit 1

fi

fi

    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||

    { $RM \"\$progdir/\$program\";

      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }

    $RM \"\$progdir/\$file\"

fi"

        else

          $ECHO "\

  program='$outputname'

  progdir=\"\$thisdir/$objdir\"

fi

        $ECHO "\

  if test -f \"\$progdir/\$program\"; then"

        # Export our shlibpath_var if we have one.

        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then

          $ECHO "\

    # Add our own library path to $shlibpath_var

    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"

    # Some systems cannot cope with colon-terminated $shlibpath_var

    # The second colon is a workaround for a bug in BeOS R4 sed

    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`

    export $shlibpath_var

fi

        # fixup the dll searchpath if we need to.

        if test -n "$dllsearchpath"; then

          $ECHO "\

    # Add the dll search path components to the executable PATH

    PATH=$dllsearchpath:\$PATH

fi

        $ECHO "\

    if test \"\$libtool_execute_magic\" != \"$magic\"; then

      # Run the actual program with our arguments.

        case $host in

        # Backslashes separate directories on plain windows

        *-*-mingw | *-*-os2* | *-cegcc*)

          $ECHO "\

      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}

;;

*)

          $ECHO "\

      exec \"\$progdir/\$program\" \${1+\"\$@\"}

;;

        esac

        $ECHO "\

      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2

      exit 1

fi

  else

    # The program doesn't exist.

    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2

    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2

    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2

    exit 1

fi

fi\

# end: func_emit_wrapper_part2

# func_emit_wrapper [arg=no]

# Emit a libtool wrapper script on stdout.

# Don't directly open a file because we may want to

# incorporate the script contents within a cygwin/mingw

# wrapper executable.  Must ONLY be called from within

# func_mode_link because it depends on a number of variables

# set therein.

# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR

# variable will take.  If 'yes', then the emitted script

# will assume that the directory in which it is stored is

# the $objdir directory.  This is a cygwin/mingw-specific

# behavior.

func_emit_wrapper ()

        func_emit_wrapper_arg1=no

        if test -n "$1" ; then

          func_emit_wrapper_arg1=$1

fi

        # split this up so that func_emit_cwrapperexe_src

        # can call each part independently.

        func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"

        func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"

# func_to_host_path arg

# Convert paths to host format when used with build tools.

# Intended for use with "native" mingw (where libtool itself

# is running under the msys shell), or in the following cross-

# build environments:

#    $build          $host

#    mingw (msys)    mingw  [e.g. native]

#    cygwin          mingw

#    *nix + wine     mingw

# where wine is equipped with the `winepath' executable.

# In the native mingw case, the (msys) shell automatically

# converts paths for any non-msys applications it launches,

# but that facility isn't available from inside the cwrapper.

# Similar accommodations are necessary for $host mingw and

# $build cygwin.  Calling this function does no harm for other

# $host/$build combinations not listed above.

# ARG is the path (on $build) that should be converted to

# the proper representation for $host. The result is stored

# in $func_to_host_path_result.

func_to_host_path ()

  func_to_host_path_result="$1"

  if test -n "$1" ; then

    case $host in

      *mingw* )

        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'

        case $build in

          *mingw* ) # actually, msys

            # awkward: cmd appends spaces to result

            lt_sed_strip_trailing_spaces="s/[ ]*\$//"

            func_to_host_path_tmp1=`( cmd //c echo "$1" |\

              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`

            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\

              $SED -e "$lt_sed_naive_backslashify"`

;;

          *cygwin* )

            func_to_host_path_tmp1=`cygpath -w "$1"`

            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\

              $SED -e "$lt_sed_naive_backslashify"`

;;

* )

            # Unfortunately, winepath does not exit with a non-zero

            # error code, so we are forced to check the contents of

            # stdout. On the other hand, if the command is not

            # found, the shell will set an exit code of 127 and print

            # *an error message* to stdout. So we must check for both

            # error code of zero AND non-empty stdout, which explains

            # the odd construction:

            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`

            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then

              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\

                $SED -e "$lt_sed_naive_backslashify"`

            else

              # Allow warning below.

              func_to_host_path_result=""

fi

;;

        esac

        if test -z "$func_to_host_path_result" ; then

          func_error "Could not determine host path corresponding to"

          func_error "  '$1'"

          func_error "Continuing, but uninstalled executables may not work."

          # Fallback:

          func_to_host_path_result="$1"

fi

;;

    esac

fi

# end: func_to_host_path

# func_to_host_pathlist arg

# Convert pathlists to host format when used with build tools.

# See func_to_host_path(), above. This function supports the

# following $build/$host combinations (but does no harm for

# combinations not listed here):

#    $build          $host

#    mingw (msys)    mingw  [e.g. native]

#    cygwin          mingw

#    *nix + wine     mingw

# Path separators are also converted from $build format to

# $host format. If ARG begins or ends with a path separator

# character, it is preserved (but converted to $host format)

# on output.

# ARG is a pathlist (on $build) that should be converted to

# the proper representation on $host. The result is stored

# in $func_to_host_pathlist_result.

func_to_host_pathlist ()

  func_to_host_pathlist_result="$1"

  if test -n "$1" ; then

    case $host in

      *mingw* )

        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'

        # Remove leading and trailing path separator characters from

        # ARG. msys behavior is inconsistent here, cygpath turns them

        # into '.;' and ';.', and winepath ignores them completely.

        func_to_host_pathlist_tmp2="$1"

        # Once set for this call, this variable should not be

        # reassigned. It is used in tha fallback case.

        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\

          $SED -e 's|^:*||' -e 's|:*$||'`

        case $build in

          *mingw* ) # Actually, msys.

            # Awkward: cmd appends spaces to result.

            lt_sed_strip_trailing_spaces="s/[ ]*\$//"

            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\

              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`

            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\

              $SED -e "$lt_sed_naive_backslashify"`

;;

          *cygwin* )

            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`

            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\

              $SED -e "$lt_sed_naive_backslashify"`

;;

* )

            # unfortunately, winepath doesn't convert pathlists

            func_to_host_pathlist_result=""

            func_to_host_pathlist_oldIFS=$IFS

            IFS=:

            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do

              IFS=$func_to_host_pathlist_oldIFS

              if test -n "$func_to_host_pathlist_f" ; then

                func_to_host_path "$func_to_host_pathlist_f"

                if test -n "$func_to_host_path_result" ; then

                  if test -z "$func_to_host_pathlist_result" ; then

                    func_to_host_pathlist_result="$func_to_host_path_result"

                  else

                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"

fi

fi

fi

              IFS=:

            done

            IFS=$func_to_host_pathlist_oldIFS

;;

        esac

        if test -z "$func_to_host_pathlist_result" ; then

          func_error "Could not determine the host path(s) corresponding to"

          func_error "  '$1'"

          func_error "Continuing, but uninstalled executables may not work."

          # Fallback. This may break if $1 contains DOS-style drive

          # specifications. The fix is not to complicate the expression

          # below, but for the user to provide a working wine installation

          # with winepath so that path translation in the cross-to-mingw

          # case works properly.

          lt_replace_pathsep_nix_to_dos="s|:|;|g"

          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\

            $SED -e "$lt_replace_pathsep_nix_to_dos"`

fi

        # Now, add the leading and trailing path separators back

        case "$1" in

          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"

;;

        esac

        case "$1" in

          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"

;;

        esac

;;

    esac

fi

# end: func_to_host_pathlist

# func_emit_cwrapperexe_src

# emit the source code for a wrapper executable on stdout

# Must ONLY be called from within func_mode_link because

# it depends on a number of variable set therein.

func_emit_cwrapperexe_src ()

        cat <<EOF

/* $cwrappersource - temporary wrapper executable for $objdir/$outputname

   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION

   The $output program cannot be directly executed until all the libtool

   libraries that it depends on are installed.

   This wrapper executable should never be moved out of the build directory.

   If it is, it will not operate correctly.

   Currently, it simply execs the wrapper *script* "$SHELL $output",

   but could eventually absorb all of the scripts functionality and

   exec $objdir/$outputname directly.

*/

EOF

            cat <<"EOF"

#include <stdio.h>

#include <stdlib.h>

#ifdef _MSC_VER

# include <direct.h>

# include <process.h>

# include <io.h>

# define setmode _setmode

#else

# include <unistd.h>

# include <stdint.h>

# ifdef __CYGWIN__

#  include <io.h>

#  define HAVE_SETENV

#  ifdef __STRICT_ANSI__

char *realpath (const char *, char *);

int putenv (char *);

int setenv (const char *, const char *, int);

#  endif

# endif

#endif

#include <malloc.h>

#include <stdarg.h>

#include <assert.h>

#include <string.h>

#include <ctype.h>

#include <errno.h>

#include <fcntl.h>

#include <sys/stat.h>

#if defined(PATH_MAX)

# define LT_PATHMAX PATH_MAX

#elif defined(MAXPATHLEN)

# define LT_PATHMAX MAXPATHLEN

#else

# define LT_PATHMAX 1024

#endif

#ifndef S_IXOTH

# define S_IXOTH 0

#endif

#ifndef S_IXGRP

# define S_IXGRP 0

#endif

#ifdef _MSC_VER

# define S_IXUSR _S_IEXEC

# define stat _stat

# ifndef _INTPTR_T_DEFINED

#  define intptr_t int

# endif

#endif

#ifndef DIR_SEPARATOR

# define DIR_SEPARATOR '/'

# define PATH_SEPARATOR ':'

#endif

#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \

  defined (__OS2__)

# define HAVE_DOS_BASED_FILE_SYSTEM

# define FOPEN_WB "wb"

# ifndef DIR_SEPARATOR_2

#  define DIR_SEPARATOR_2 '\\'

# endif

# ifndef PATH_SEPARATOR_2

#  define PATH_SEPARATOR_2 ';'

# endif

#endif

#ifndef DIR_SEPARATOR_2

# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)

#else /* DIR_SEPARATOR_2 */

# define IS_DIR_SEPARATOR(ch) \

        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))

#endif /* DIR_SEPARATOR_2 */

#ifndef PATH_SEPARATOR_2

# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)

#else /* PATH_SEPARATOR_2 */

# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)

#endif /* PATH_SEPARATOR_2 */

#ifdef __CYGWIN__

# define FOPEN_WB "wb"

#endif

#ifndef FOPEN_WB

# define FOPEN_WB "w"

#endif

#ifndef _O_BINARY

# define _O_BINARY 0

#endif

#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))

#define XFREE(stale) do { \

  if (stale) { free ((void *) stale); stale = 0; } \

} while (0)

#undef LTWRAPPER_DEBUGPRINTF

#if defined DEBUGWRAPPER

# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args

static void

ltwrapper_debugprintf (const char *fmt, ...)

    va_list args;

    va_start (args, fmt);

    (void) vfprintf (stderr, fmt, args);

    va_end (args);

#else

# define LTWRAPPER_DEBUGPRINTF(args)

#endif

const char *program_name = NULL;

void *xmalloc (size_t num);

char *xstrdup (const char *string);

const char *base_name (const char *name);

char *find_executable (const char *wrapper);

char *chase_symlinks (const char *pathspec);

int make_executable (const char *path);

int check_executable (const char *path);

char *strendzap (char *str, const char *pat);

void lt_fatal (const char *message, ...);

void lt_setenv (const char *name, const char *value);

char *lt_extend_str (const char *orig_value, const char *add, int to_end);

void lt_opt_process_env_set (const char *arg);

void lt_opt_process_env_prepend (const char *arg);

void lt_opt_process_env_append (const char *arg);

int lt_split_name_value (const char *arg, char** name, char** value);

void lt_update_exe_path (const char *name, const char *value);

void lt_update_lib_path (const char *name, const char *value);

static const char *script_text_part1 =

EOF

            func_emit_wrapper_part1 yes |

                $SED -e 's/\([\\"]\)/\\\1/g' \

                     -e 's/^/  "/' -e 's/$/\\n"/'

            echo ";"

            cat <<EOF

static const char *script_text_part2 =

EOF

            func_emit_wrapper_part2 yes |

                $SED -e 's/\([\\"]\)/\\\1/g' \

                     -e 's/^/  "/' -e 's/$/\\n"/'

            echo ";"

            cat <<EOF

const char * MAGIC_EXE = "$magic_exe";

const char * LIB_PATH_VARNAME = "$shlibpath_var";

EOF

            if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then

              func_to_host_pathlist "$temp_rpath"

              cat <<EOF

const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";

EOF

            else

              cat <<"EOF"

const char * LIB_PATH_VALUE   = "";

EOF

fi

            if test -n "$dllsearchpath"; then

              func_to_host_pathlist "$dllsearchpath:"

              cat <<EOF

const char * EXE_PATH_VARNAME = "PATH";

const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";

EOF

            else

              cat <<"EOF"

const char * EXE_PATH_VARNAME = "";

const char * EXE_PATH_VALUE   = "";

EOF

fi

            if test "$fast_install" = yes; then

              cat <<EOF

const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */

EOF

            else

              cat <<EOF

const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */

EOF

fi

            cat <<"EOF"

#define LTWRAPPER_OPTION_PREFIX         "--lt-"

#define LTWRAPPER_OPTION_PREFIX_LENGTH  5

static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;

static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;

static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";

static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;

static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";

  /* argument is putenv-style "foo=bar", value of foo is set to bar */

static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;

static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";

  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */

static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;

static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";

  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */

int

main (int argc, char *argv[])

  char **newargz;

  int  newargc;

  char *tmp_pathspec;

  char *actual_cwrapper_path;

  char *actual_cwrapper_name;

  char *target_name;

  char *lt_argv_zero;

  intptr_t rval = 127;

  int i;

  program_name = (char *) xstrdup (base_name (argv[0]));

  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));

  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));

  /* very simple arg parsing; don't want to rely on getopt */

  for (i = 1; i < argc; i++)

      if (strcmp (argv[i], dumpscript_opt) == 0)

EOF

            case "$host" in

              *mingw* | *cygwin* )

                # make stdout use "unix" line endings

                echo "          setmode(1,_O_BINARY);"

;;

              esac

            cat <<"EOF"

          printf ("%s", script_text_part1);

          printf ("%s", script_text_part2);

          return 0;

  newargz = XMALLOC (char *, argc + 1);

  tmp_pathspec = find_executable (argv[0]);

  if (tmp_pathspec == NULL)

    lt_fatal ("Couldn't find %s", argv[0]);

  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",

                          tmp_pathspec));

  actual_cwrapper_path = chase_symlinks (tmp_pathspec);

  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",

                          actual_cwrapper_path));

  XFREE (tmp_pathspec);

  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));

  strendzap (actual_cwrapper_path, actual_cwrapper_name);

  /* wrapper name transforms */

  strendzap (actual_cwrapper_name, ".exe");

  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);

  XFREE (actual_cwrapper_name);

  actual_cwrapper_name = tmp_pathspec;

  tmp_pathspec = 0;

  /* target_name transforms -- use actual target program name; might have lt- prefix */

  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));

  strendzap (target_name, ".exe");

  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);

  XFREE (target_name);

  target_name = tmp_pathspec;

  tmp_pathspec = 0;

  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",

                          target_name));

EOF

            cat <<EOF

  newargz[0] =

    XMALLOC (char, (strlen (actual_cwrapper_path) +

                    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));

  strcpy (newargz[0], actual_cwrapper_path);

  strcat (newargz[0], "$objdir");

  strcat (newargz[0], "/");

EOF

            cat <<"EOF"

  /* stop here, and copy so we don't have to do this twice */

  tmp_pathspec = xstrdup (newargz[0]);

  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */

  strcat (newargz[0], actual_cwrapper_name);

  /* DO want the lt- prefix here if it exists, so use target_name */

  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);

  XFREE (tmp_pathspec);

  tmp_pathspec = NULL;

EOF

            case $host_os in

              mingw*)

            cat <<"EOF"

    char* p;

    while ((p = strchr (newargz[0], '\\')) != NULL)

        *p = '/';

    while ((p = strchr (lt_argv_zero, '\\')) != NULL)

        *p = '/';

EOF

;;

            esac

            cat <<"EOF"

  XFREE (target_name);

  XFREE (actual_cwrapper_path);

  XFREE (actual_cwrapper_name);

  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */

  lt_setenv ("DUALCASE", "1");  /* for MSK sh */

  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);

  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);

  newargc=0;

  for (i = 1; i < argc; i++)

      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)

          if (argv[i][env_set_opt_len] == '=')

              const char *p = argv[i] + env_set_opt_len + 1;

              lt_opt_process_env_set (p);

          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)

              lt_opt_process_env_set (argv[++i]); /* don't copy */

          else

            lt_fatal ("%s missing required argument", env_set_opt);

          continue;

      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)

          if (argv[i][env_prepend_opt_len] == '=')

              const char *p = argv[i] + env_prepend_opt_len + 1;

              lt_opt_process_env_prepend (p);

          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)

              lt_opt_process_env_prepend (argv[++i]); /* don't copy */

          else

            lt_fatal ("%s missing required argument", env_prepend_opt);

          continue;

      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)

          if (argv[i][env_append_opt_len] == '=')

              const char *p = argv[i] + env_append_opt_len + 1;

              lt_opt_process_env_append (p);

          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)

              lt_opt_process_env_append (argv[++i]); /* don't copy */

          else

            lt_fatal ("%s missing required argument", env_append_opt);

          continue;

      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)

          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX

             namespace, but it is not one of the ones we know about and

             have already dealt with, above (inluding dump-script), then

             report an error. Otherwise, targets might begin to believe

             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX

             namespace. The first time any user complains about this, we'll

             need to make LTWRAPPER_OPTION_PREFIX a configure-time option

             or a configure.ac-settable value.

*/

          lt_fatal ("Unrecognized option in %s namespace: '%s'",

                    ltwrapper_option_prefix, argv[i]);

      /* otherwise ... */

      newargz[++newargc] = xstrdup (argv[i]);

  newargz[++newargc] = NULL;

  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));

  for (i = 0; i < newargc; i++)

      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));

EOF

            case $host_os in

              mingw*)

                cat <<"EOF"

  /* execv doesn't actually work on mingw as expected on unix */

  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);

  if (rval == -1)

      /* failed to start process */

      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));

      return 127;

  return rval;

EOF

;;

*)

                cat <<"EOF"

  execv (lt_argv_zero, newargz);

  return rval; /* =127, but avoids unused variable warning */

EOF

;;

            esac

            cat <<"EOF"

void *

xmalloc (size_t num)

  void *p = (void *) malloc (num);

  if (!p)

    lt_fatal ("Memory exhausted");

  return p;

char *

xstrdup (const char *string)

  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),

                          string) : NULL;

const char *

base_name (const char *name)

  const char *base;

#if defined (HAVE_DOS_BASED_FILE_SYSTEM)

  /* Skip over the disk name in MSDOS pathnames. */

  if (isalpha ((unsigned char) name[0]) && name[1] == ':')

    name += 2;

#endif

  for (base = name; *name; name++)

    if (IS_DIR_SEPARATOR (*name))

      base = name + 1;

  return base;

int

check_executable (const char *path)

  struct stat st;

  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",

                          path ? (*path ? path : "EMPTY!") : "NULL!"));

  if ((!path) || (!*path))

    return 0;

  if ((stat (path, &st) >= 0)

      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))

    return 1;

  else

    return 0;

int

make_executable (const char *path)

  int rval = 0;

  struct stat st;

  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",

                          path ? (*path ? path : "EMPTY!") : "NULL!"));

  if ((!path) || (!*path))

    return 0;

  if (stat (path, &st) >= 0)

      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);

  return rval;

/* Searches for the full path of the wrapper.  Returns

   newly allocated full path name if found, NULL otherwise

   Does not chase symlinks, even on platforms that support them.

*/

char *

find_executable (const char *wrapper)

  int has_slash = 0;

  const char *p;

  const char *p_next;

  /* static buffer for getcwd */

  char tmp[LT_PATHMAX + 1];

  int tmp_len;

  char *concat_name;

  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",

                          wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));

  if ((wrapper == NULL) || (*wrapper == '\0'))

    return NULL;

  /* Absolute path? */

#if defined (HAVE_DOS_BASED_FILE_SYSTEM)

  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')

      concat_name = xstrdup (wrapper);

      if (check_executable (concat_name))

        return concat_name;

      XFREE (concat_name);

  else

#endif

      if (IS_DIR_SEPARATOR (wrapper[0]))

          concat_name = xstrdup (wrapper);

          if (check_executable (concat_name))

            return concat_name;

          XFREE (concat_name);

#if defined (HAVE_DOS_BASED_FILE_SYSTEM)

#endif

  for (p = wrapper; *p; p++)

    if (*p == '/')

        has_slash = 1;

        break;

  if (!has_slash)

      /* no slashes; search PATH */

      const char *path = getenv ("PATH");

      if (path != NULL)

          for (p = path; *p; p = p_next)

              const char *q;

              size_t p_len;

              for (q = p; *q; q++)

                if (IS_PATH_SEPARATOR (*q))

                  break;

              p_len = q - p;

              p_next = (*q == '\0' ? q : q + 1);

              if (p_len == 0)

                  /* empty path: current directory */

                  if (getcwd (tmp, LT_PATHMAX) == NULL)

                    lt_fatal ("getcwd failed");

                  tmp_len = strlen (tmp);

                  concat_name =

                    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);

                  memcpy (concat_name, tmp, tmp_len);

                  concat_name[tmp_len] = '/';

                  strcpy (concat_name + tmp_len + 1, wrapper);

              else

                  concat_name =

                    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);

                  memcpy (concat_name, p, p_len);

                  concat_name[p_len] = '/';

                  strcpy (concat_name + p_len + 1, wrapper);

              if (check_executable (concat_name))

                return concat_name;

              XFREE (concat_name);

      /* not found in PATH; assume curdir */

  /* Relative path | not found in path: prepend cwd */

  if (getcwd (tmp, LT_PATHMAX) == NULL)

    lt_fatal ("getcwd failed");

  tmp_len = strlen (tmp);

  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);

  memcpy (concat_name, tmp, tmp_len);

  concat_name[tmp_len] = '/';

  strcpy (concat_name + tmp_len + 1, wrapper);

  if (check_executable (concat_name))

    return concat_name;

  XFREE (concat_name);

  return NULL;

char *

chase_symlinks (const char *pathspec)

#ifndef S_ISLNK

  return xstrdup (pathspec);

#else

  char buf[LT_PATHMAX];

  struct stat s;

  char *tmp_pathspec = xstrdup (pathspec);

  char *p;

  int has_symlinks = 0;

  while (strlen (tmp_pathspec) && !has_symlinks)

      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",

                              tmp_pathspec));

      if (lstat (tmp_pathspec, &s) == 0)

          if (S_ISLNK (s.st_mode) != 0)

              has_symlinks = 1;

              break;

          /* search backwards for last DIR_SEPARATOR */

          p = tmp_pathspec + strlen (tmp_pathspec) - 1;

          while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))

            p--;

          if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))

              /* no more DIR_SEPARATORS left */

              break;

          *p = '\0';

      else

          char *errstr = strerror (errno);

          lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);

  XFREE (tmp_pathspec);

  if (!has_symlinks)

      return xstrdup (pathspec);

  tmp_pathspec = realpath (pathspec, buf);

  if (tmp_pathspec == 0)

      lt_fatal ("Could not follow symlinks for %s", pathspec);

  return xstrdup (tmp_pathspec);

#endif

char *

strendzap (char *str, const char *pat)

  size_t len, patlen;

  assert (str != NULL);

  assert (pat != NULL);

  len = strlen (str);

  patlen = strlen (pat);

  if (patlen <= len)

      str += len - patlen;

      if (strcmp (str, pat) == 0)

        *str = '\0';

  return str;

static void

lt_error_core (int exit_status, const char *mode,

               const char *message, va_list ap)

  fprintf (stderr, "%s: %s: ", program_name, mode);

  vfprintf (stderr, message, ap);

  fprintf (stderr, ".\n");

  if (exit_status >= 0)

    exit (exit_status);

void

lt_fatal (const char *message, ...)

  va_list ap;

  va_start (ap, message);

  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);

  va_end (ap);

void

lt_setenv (const char *name, const char *value)

  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",

                          (name ? name : "<NULL>"),

                          (value ? value : "<NULL>")));

#ifdef HAVE_SETENV

    /* always make a copy, for consistency with !HAVE_SETENV */

    char *str = xstrdup (value);

    setenv (name, str, 1);

#else

    int len = strlen (name) + 1 + strlen (value) + 1;

    char *str = XMALLOC (char, len);

    sprintf (str, "%s=%s", name, value);

    if (putenv (str) != EXIT_SUCCESS)

        XFREE (str);

#endif

char *

lt_extend_str (const char *orig_value, const char *add, int to_end)

  char *new_value;

  if (orig_value && *orig_value)

      int orig_value_len = strlen (orig_value);

      int add_len = strlen (add);

      new_value = XMALLOC (char, add_len + orig_value_len + 1);

      if (to_end)

          strcpy (new_value, orig_value);

          strcpy (new_value + orig_value_len, add);

      else

          strcpy (new_value, add);

          strcpy (new_value + add_len, orig_value);

  else

      new_value = xstrdup (add);

  return new_value;

int

lt_split_name_value (const char *arg, char** name, char** value)

  const char *p;

  int len;

  if (!arg || !*arg)

    return 1;

  p = strchr (arg, (int)'=');

  if (!p)

    return 1;

  *value = xstrdup (++p);

  len = strlen (arg) - strlen (*value);

  *name = XMALLOC (char, len);

  strncpy (*name, arg, len-1);

  (*name)[len - 1] = '\0';

  return 0;

void

lt_opt_process_env_set (const char *arg)

  char *name = NULL;

  char *value = NULL;

  if (lt_split_name_value (arg, &name, &value) != 0)

      XFREE (name);

      XFREE (value);

      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);

  lt_setenv (name, value);

  XFREE (name);

  XFREE (value);

void

lt_opt_process_env_prepend (const char *arg)

  char *name = NULL;

  char *value = NULL;

  char *new_value = NULL;

  if (lt_split_name_value (arg, &name, &value) != 0)

      XFREE (name);

      XFREE (value);

      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);

  new_value = lt_extend_str (getenv (name), value, 0);

  lt_setenv (name, new_value);

  XFREE (new_value);

  XFREE (name);

  XFREE (value);

void

lt_opt_process_env_append (const char *arg)

  char *name = NULL;

  char *value = NULL;

  char *new_value = NULL;

  if (lt_split_name_value (arg, &name, &value) != 0)

      XFREE (name);

      XFREE (value);

      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);

  new_value = lt_extend_str (getenv (name), value, 1);

  lt_setenv (name, new_value);

  XFREE (new_value);

  XFREE (name);

  XFREE (value);

void

lt_update_exe_path (const char *name, const char *value)

  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",

                          (name ? name : "<NULL>"),

                          (value ? value : "<NULL>")));

  if (name && *name && value && *value)

      char *new_value = lt_extend_str (getenv (name), value, 0);

      /* some systems can't cope with a ':'-terminated path #' */

      int len = strlen (new_value);

      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))

          new_value[len-1] = '\0';

      lt_setenv (name, new_value);

      XFREE (new_value);

void

lt_update_lib_path (const char *name, const char *value)

  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",

                          (name ? name : "<NULL>"),

                          (value ? value : "<NULL>")));

  if (name && *name && value && *value)

      char *new_value = lt_extend_str (getenv (name), value, 0);

      lt_setenv (name, new_value);

      XFREE (new_value);

EOF

# end: func_emit_cwrapperexe_src

# func_mode_link arg...

func_mode_link ()

    $opt_debug

    case $host in

    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)

      # It is impossible to link a dll without this setting, and

      # we shouldn't force the makefile maintainer to figure out

      # which system we are compiling for in order to pass an extra

      # flag for every libtool invocation.

      # allow_undefined=no

      # FIXME: Unfortunately, there are problems with the above when trying

      # to make a dll which has undefined symbols, in which case not

      # even a static library is built.  For now, we need to specify

      # -no-undefined on the libtool link line when we can be certain

      # that all symbols are satisfied, otherwise we get a static library.

      allow_undefined=yes

;;

*)

      allow_undefined=yes

;;

    esac

    libtool_args=$nonopt

    base_compile="$nonopt $@"

    compile_command=$nonopt

    finalize_command=$nonopt

    compile_rpath=

    finalize_rpath=

    compile_shlibpath=

    finalize_shlibpath=

    convenience=

    old_convenience=

    deplibs=

    old_deplibs=

    compiler_flags=

    linker_flags=

    dllsearchpath=

    lib_search_path=`pwd`

    inst_prefix_dir=

    new_inherited_linker_flags=

    avoid_version=no

    dlfiles=

    dlprefiles=

    dlself=no

    export_dynamic=no

    export_symbols=

    export_symbols_regex=

    generated=

    libobjs=

    ltlibs=

    module=no

    no_install=no

    objs=

    non_pic_objects=

    precious_files_regex=

    prefer_static_libs=no

    preload=no

    prev=

    prevarg=

    release=

    rpath=

    xrpath=

    perm_rpath=

    temp_rpath=

    thread_safe=no

    vinfo=

    vinfo_number=no

    weak_libs=

    single_module="${wl}-single_module"

    func_infer_tag $base_compile

    # We need to know -static, to get the right output filenames.

    for arg

do

      case $arg in

      -shared)

        test "$build_libtool_libs" != yes && \

          func_fatal_configuration "can not build a shared library"

        build_old_libs=no

        break

;;

      -all-static | -static | -static-libtool-libs)

        case $arg in

        -all-static)

          if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then

            func_warning "complete static linking is impossible in this configuration"

fi

          if test -n "$link_static_flag"; then

            dlopen_self=$dlopen_self_static

fi

          prefer_static_libs=yes

;;

        -static)

          if test -z "$pic_flag" && test -n "$link_static_flag"; then

            dlopen_self=$dlopen_self_static

fi

          prefer_static_libs=built

;;

        -static-libtool-libs)

          if test -z "$pic_flag" && test -n "$link_static_flag"; then

            dlopen_self=$dlopen_self_static

fi

          prefer_static_libs=yes

;;

        esac

        build_libtool_libs=no

        build_old_libs=yes

        break

;;

      esac

    done

    # See if our shared archives depend on static archives.

    test -n "$old_archive_from_new_cmds" && build_old_libs=yes

    # Go through the arguments, transforming them on the way.

    while test "$#" -gt 0; do

      arg="$1"

      shift

      func_quote_for_eval "$arg"

      qarg=$func_quote_for_eval_unquoted_result

      func_append libtool_args " $func_quote_for_eval_result"

      # If the previous option needs an argument, assign it.

      if test -n "$prev"; then

        case $prev in

        output)

          func_append compile_command " @OUTPUT@"

          func_append finalize_command " @OUTPUT@"

;;

        esac

        case $prev in

        dlfiles|dlprefiles)

          if test "$preload" = no; then

            # Add the symbol object into the linking commands.

            func_append compile_command " @SYMFILE@"

            func_append finalize_command " @SYMFILE@"

            preload=yes

fi

          case $arg in

          *.la | *.lo) ;;  # We handle these cases below.

          force)

            if test "$dlself" = no; then

              dlself=needless

              export_dynamic=yes

fi

            prev=

            continue

;;

          self)

            if test "$prev" = dlprefiles; then

              dlself=yes

            elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then

              dlself=yes

            else

              dlself=needless

              export_dynamic=yes

fi

            prev=

            continue

;;

*)

            if test "$prev" = dlfiles; then

              dlfiles="$dlfiles $arg"

            else

              dlprefiles="$dlprefiles $arg"

fi

            prev=

            continue

;;

          esac

;;

        expsyms)

          export_symbols="$arg"

          test -f "$arg" \

            || func_fatal_error "symbol file \`$arg' does not exist"

          prev=

          continue

;;

        expsyms_regex)

          export_symbols_regex="$arg"

          prev=

          continue

;;

        framework)

          case $host in

            *-*-darwin*)

              case "$deplibs " in

                *" $qarg.ltframework "*) ;;

                *) deplibs="$deplibs $qarg.ltframework" # this is fixed later

;;

              esac

;;

          esac

          prev=

          continue

;;

        inst_prefix)

          inst_prefix_dir="$arg"

          prev=

          continue

;;

        objectlist)

          if test -f "$arg"; then

            save_arg=$arg

            moreargs=

            for fil in `cat "$save_arg"`

do

#             moreargs="$moreargs $fil"

              arg=$fil

              # A libtool-controlled object.

              # Check to see that this really is a libtool object.

              if func_lalib_unsafe_p "$arg"; then

                pic_object=

                non_pic_object=

                # Read the .lo file

                func_source "$arg"

                if test -z "$pic_object" ||

                   test -z "$non_pic_object" ||

                   test "$pic_object" = none &&

                   test "$non_pic_object" = none; then

                  func_fatal_error "cannot find name of object for \`$arg'"

fi

                # Extract subdirectory from the argument.

                func_dirname "$arg" "/" ""

                xdir="$func_dirname_result"

                if test "$pic_object" != none; then

                  # Prepend the subdirectory the object is found in.

                  pic_object="$xdir$pic_object"

                  if test "$prev" = dlfiles; then

                    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then

                      dlfiles="$dlfiles $pic_object"

                      prev=

                      continue

                    else

                      # If libtool objects are unsupported, then we need to preload.

                      prev=dlprefiles

fi

fi

                  # CHECK ME:  I think I busted this.  -Ossama

                  if test "$prev" = dlprefiles; then

                    # Preload the old-style object.

                    dlprefiles="$dlprefiles $pic_object"

                    prev=

fi

                  # A PIC object.

                  func_append libobjs " $pic_object"

                  arg="$pic_object"

fi

                # Non-PIC object.

                if test "$non_pic_object" != none; then

                  # Prepend the subdirectory the object is found in.

                  non_pic_object="$xdir$non_pic_object"

                  # A standard non-PIC object

                  func_append non_pic_objects " $non_pic_object"

                  if test -z "$pic_object" || test "$pic_object" = none ; then

                    arg="$non_pic_object"

fi

                else

                  # If the PIC object exists, use it instead.

                  # $xdir was prepended to $pic_object above.

                  non_pic_object="$pic_object"

                  func_append non_pic_objects " $non_pic_object"

fi

              else

                # Only an error if not doing a dry-run.

                if $opt_dry_run; then

                  # Extract subdirectory from the argument.

                  func_dirname "$arg" "/" ""

                  xdir="$func_dirname_result"

                  func_lo2o "$arg"

                  pic_object=$xdir$objdir/$func_lo2o_result

                  non_pic_object=$xdir$func_lo2o_result

                  func_append libobjs " $pic_object"

                  func_append non_pic_objects " $non_pic_object"

                else

                  func_fatal_error "\`$arg' is not a valid libtool object"

fi

fi

            done

          else

            func_fatal_error "link input file \`$arg' does not exist"

fi

          arg=$save_arg

          prev=

          continue

;;

        precious_regex)

          precious_files_regex="$arg"

          prev=

          continue

;;

        release)

          release="-$arg"

          prev=

          continue

;;

        rpath | xrpath)

          # We need an absolute path.

          case $arg in

          [\\/]* | [A-Za-z]:[\\/]*) ;;

*)

            func_fatal_error "only absolute run-paths are allowed"

;;

          esac

          if test "$prev" = rpath; then

            case "$rpath " in

            *" $arg "*) ;;

            *) rpath="$rpath $arg" ;;

            esac

          else

            case "$xrpath " in

            *" $arg "*) ;;

            *) xrpath="$xrpath $arg" ;;

            esac

fi

          prev=

          continue

;;

        shrext)

          shrext_cmds="$arg"

          prev=

          continue

;;

        weak)

          weak_libs="$weak_libs $arg"

          prev=

          continue

;;

        xcclinker)

          linker_flags="$linker_flags $qarg"

          compiler_flags="$compiler_flags $qarg"

          prev=

          func_append compile_command " $qarg"

          func_append finalize_command " $qarg"

          continue

;;

        xcompiler)

          compiler_flags="$compiler_flags $qarg"

          prev=

          func_append compile_command " $qarg"

          func_append finalize_command " $qarg"

          continue

;;

        xlinker)

          linker_flags="$linker_flags $qarg"

          compiler_flags="$compiler_flags $wl$qarg"

          prev=

          func_append compile_command " $wl$qarg"

          func_append finalize_command " $wl$qarg"

          continue

;;

*)

          eval "$prev=\"\$arg\""

          prev=

          continue

;;

        esac

      fi # test -n "$prev"

      prevarg="$arg"

      case $arg in

      -all-static)

        if test -n "$link_static_flag"; then

          # See comment for -static flag below, for more details.

          func_append compile_command " $link_static_flag"

          func_append finalize_command " $link_static_flag"

fi

        continue

;;

      -allow-undefined)

        # FIXME: remove this flag sometime in the future.

        func_fatal_error "\`-allow-undefined' must not be used because it is the default"

;;

      -avoid-version)

        avoid_version=yes

        continue

;;

      -dlopen)

        prev=dlfiles

        continue

;;

      -dlpreopen)

        prev=dlprefiles

        continue

;;

      -export-dynamic)

        export_dynamic=yes

        continue

;;

      -export-symbols | -export-symbols-regex)

        if test -n "$export_symbols" || test -n "$export_symbols_regex"; then

          func_fatal_error "more than one -exported-symbols argument is not allowed"

fi

        if test "X$arg" = "X-export-symbols"; then

          prev=expsyms

        else

          prev=expsyms_regex

fi

        continue

;;

      -framework)

        prev=framework

        continue

;;

      -inst-prefix-dir)

        prev=inst_prefix

        continue

;;

      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*

      # so, if we see these flags be careful not to treat them like -L

      -L[A-Z][A-Z]*:*)

        case $with_gcc/$host in

        no/*-*-irix* | /*-*-irix*)

          func_append compile_command " $arg"

          func_append finalize_command " $arg"

;;

        esac

        continue

;;

      -L*)

        func_stripname '-L' '' "$arg"

        dir=$func_stripname_result

        if test -z "$dir"; then

          if test "$#" -gt 0; then

            func_fatal_error "require no space between \`-L' and \`$1'"

          else

            func_fatal_error "need path for \`-L' option"

fi

fi

        # We need an absolute path.

        case $dir in

        [\\/]* | [A-Za-z]:[\\/]*) ;;

*)

          absdir=`cd "$dir" && pwd`

          test -z "$absdir" && \

            func_fatal_error "cannot determine absolute directory name of \`$dir'"

          dir="$absdir"

;;

        esac

        case "$deplibs " in

        *" -L$dir "*) ;;

*)

          deplibs="$deplibs -L$dir"

          lib_search_path="$lib_search_path $dir"

;;

        esac

        case $host in

        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)

          testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`

          case :$dllsearchpath: in

          *":$dir:"*) ;;

          ::) dllsearchpath=$dir;;

          *) dllsearchpath="$dllsearchpath:$dir";;

          esac

          case :$dllsearchpath: in

          *":$testbindir:"*) ;;

          ::) dllsearchpath=$testbindir;;

          *) dllsearchpath="$dllsearchpath:$testbindir";;

          esac

;;

        esac

        continue

;;

      -l*)

        if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then

          case $host in

          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)

            # These systems don't actually have a C or math library (as such)

            continue

;;

          *-*-os2*)

            # These systems don't actually have a C library (as such)

            test "X$arg" = "X-lc" && continue

;;

          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)

            # Do not include libc due to us having libc/libc_r.

            test "X$arg" = "X-lc" && continue

;;

          *-*-rhapsody* | *-*-darwin1.[012])

            # Rhapsody C and math libraries are in the System framework

            deplibs="$deplibs System.ltframework"

            continue

;;

          *-*-sco3.2v5* | *-*-sco5v6*)

            # Causes problems with __ctype

            test "X$arg" = "X-lc" && continue

;;

          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)

            # Compiler inserts libc in the correct place for threads to work

            test "X$arg" = "X-lc" && continue

;;

          esac

        elif test "X$arg" = "X-lc_r"; then

         case $host in

         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)

           # Do not include libc_r directly, use -pthread flag.

           continue

;;

         esac

fi

        deplibs="$deplibs $arg"

        continue

;;

      -module)

        module=yes

        continue

;;

      # Tru64 UNIX uses -model [arg] to determine the layout of C++

      # classes, name mangling, and exception handling.

      # Darwin uses the -arch flag to determine output architecture.

      -model|-arch|-isysroot)

        compiler_flags="$compiler_flags $arg"

        func_append compile_command " $arg"

        func_append finalize_command " $arg"

        prev=xcompiler

        continue

;;

      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)

        compiler_flags="$compiler_flags $arg"

        func_append compile_command " $arg"

        func_append finalize_command " $arg"

        case "$new_inherited_linker_flags " in

            *" $arg "*) ;;

            * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;

        esac

        continue

;;

      -multi_module)

        single_module="${wl}-multi_module"

        continue

;;

      -no-fast-install)

        fast_install=no

        continue

;;

      -no-install)

        case $host in

        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)

          # The PATH hackery in wrapper scripts is required on Windows

          # and Darwin in order for the loader to find any dlls it needs.

          func_warning "\`-no-install' is ignored for $host"

          func_warning "assuming \`-no-fast-install' instead"

          fast_install=no

;;

        *) no_install=yes ;;

        esac

        continue

;;

      -no-undefined)

        allow_undefined=no

        continue

;;

      -objectlist)

        prev=objectlist

        continue

;;

      -o) prev=output ;;

      -precious-files-regex)

        prev=precious_regex

        continue

;;

      -release)

        prev=release

        continue

;;

      -rpath)

        prev=rpath

        continue

;;

-R)

        prev=xrpath

        continue

;;

      -R*)

        func_stripname '-R' '' "$arg"

        dir=$func_stripname_result

        # We need an absolute path.

        case $dir in

        [\\/]* | [A-Za-z]:[\\/]*) ;;

*)

          func_fatal_error "only absolute run-paths are allowed"

;;

        esac

        case "$xrpath " in

        *" $dir "*) ;;

        *) xrpath="$xrpath $dir" ;;

        esac

        continue

;;

      -shared)

        # The effects of -shared are defined in a previous loop.

        continue

;;

      -shrext)

        prev=shrext

        continue

;;

      -static | -static-libtool-libs)

        # The effects of -static are defined in a previous loop.

        # We used to do the same as -all-static on platforms that

        # didn't have a PIC flag, but the assumption that the effects

        # would be equivalent was wrong.  It would break on at least

        # Digital Unix and AIX.

        continue

;;

      -thread-safe)

        thread_safe=yes

        continue

;;

      -version-info)

        prev=vinfo

        continue

;;

      -version-number)

        prev=vinfo

        vinfo_number=yes

        continue

;;

      -weak)

        prev=weak

        continue

;;

      -Wc,*)

        func_stripname '-Wc,' '' "$arg"

        args=$func_stripname_result

        arg=

        save_ifs="$IFS"; IFS=','

        for flag in $args; do

          IFS="$save_ifs"

          func_quote_for_eval "$flag"

          arg="$arg $wl$func_quote_for_eval_result"

          compiler_flags="$compiler_flags $func_quote_for_eval_result"

        done

        IFS="$save_ifs"

        func_stripname ' ' '' "$arg"

        arg=$func_stripname_result

;;

      -Wl,*)

        func_stripname '-Wl,' '' "$arg"

        args=$func_stripname_result

        arg=

        save_ifs="$IFS"; IFS=','

        for flag in $args; do

          IFS="$save_ifs"

          func_quote_for_eval "$flag"

          arg="$arg $wl$func_quote_for_eval_result"

          compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"

          linker_flags="$linker_flags $func_quote_for_eval_result"

        done

        IFS="$save_ifs"

        func_stripname ' ' '' "$arg"

        arg=$func_stripname_result

;;

      -Xcompiler)

        prev=xcompiler

        continue

;;

      -Xlinker)

        prev=xlinker

        continue

;;

      -XCClinker)

        prev=xcclinker

        continue

;;

      # -msg_* for osf cc

      -msg_*)

        func_quote_for_eval "$arg"

        arg="$func_quote_for_eval_result"

;;

      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler

      # -r[0-9][0-9]* specifies the processor on the SGI compiler

      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler

      # +DA*, +DD* enable 64-bit mode on the HP compiler

      # -q* pass through compiler args for the IBM compiler

      # -m*, -t[45]*, -txscale* pass through architecture-specific

      # compiler args for GCC

      # -F/path gives path to uninstalled frameworks, gcc on darwin

      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC

      # @file GCC response files

      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \

      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)

        func_quote_for_eval "$arg"

        arg="$func_quote_for_eval_result"

        func_append compile_command " $arg"

        func_append finalize_command " $arg"

        compiler_flags="$compiler_flags $arg"

        continue

;;

      # Some other compiler flag.

      -* | +*)

        func_quote_for_eval "$arg"

        arg="$func_quote_for_eval_result"

;;

      *.$objext)

        # A standard object.

        objs="$objs $arg"

;;

      *.lo)

        # A libtool-controlled object.

        # Check to see that this really is a libtool object.

        if func_lalib_unsafe_p "$arg"; then

          pic_object=

          non_pic_object=

          # Read the .lo file

          func_source "$arg"

          if test -z "$pic_object" ||

             test -z "$non_pic_object" ||

             test "$pic_object" = none &&

             test "$non_pic_object" = none; then

            func_fatal_error "cannot find name of object for \`$arg'"

fi

          # Extract subdirectory from the argument.

          func_dirname "$arg" "/" ""

          xdir="$func_dirname_result"

          if test "$pic_object" != none; then

            # Prepend the subdirectory the object is found in.

            pic_object="$xdir$pic_object"

            if test "$prev" = dlfiles; then

              if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then

                dlfiles="$dlfiles $pic_object"

                prev=

                continue

              else

                # If libtool objects are unsupported, then we need to preload.

                prev=dlprefiles

fi

fi

            # CHECK ME:  I think I busted this.  -Ossama

            if test "$prev" = dlprefiles; then

              # Preload the old-style object.

              dlprefiles="$dlprefiles $pic_object"

              prev=

fi

            # A PIC object.

            func_append libobjs " $pic_object"

            arg="$pic_object"

fi

          # Non-PIC object.

          if test "$non_pic_object" != none; then

            # Prepend the subdirectory the object is found in.

            non_pic_object="$xdir$non_pic_object"

            # A standard non-PIC object

            func_append non_pic_objects " $non_pic_object"

            if test -z "$pic_object" || test "$pic_object" = none ; then

              arg="$non_pic_object"

fi

          else

            # If the PIC object exists, use it instead.

            # $xdir was prepended to $pic_object above.

            non_pic_object="$pic_object"

            func_append non_pic_objects " $non_pic_object"

fi

        else

          # Only an error if not doing a dry-run.

          if $opt_dry_run; then

            # Extract subdirectory from the argument.

            func_dirname "$arg" "/" ""

            xdir="$func_dirname_result"

            func_lo2o "$arg"

            pic_object=$xdir$objdir/$func_lo2o_result

            non_pic_object=$xdir$func_lo2o_result

            func_append libobjs " $pic_object"

            func_append non_pic_objects " $non_pic_object"

          else

            func_fatal_error "\`$arg' is not a valid libtool object"

fi

fi

;;

      *.$libext)

        # An archive.

        deplibs="$deplibs $arg"

        old_deplibs="$old_deplibs $arg"

        continue

;;

      *.la)

        # A libtool-controlled library.

        if test "$prev" = dlfiles; then

          # This library was specified with -dlopen.

          dlfiles="$dlfiles $arg"

          prev=

        elif test "$prev" = dlprefiles; then

          # The library was specified with -dlpreopen.

          dlprefiles="$dlprefiles $arg"

          prev=

        else

          deplibs="$deplibs $arg"

fi

        continue

;;

      # Some other compiler argument.

*)

        # Unknown arguments in both finalize_command and compile_command need

        # to be aesthetically quoted because they are evaled later.

        func_quote_for_eval "$arg"

        arg="$func_quote_for_eval_result"

;;

      esac # arg

      # Now actually substitute the argument into the commands.

      if test -n "$arg"; then

        func_append compile_command " $arg"

        func_append finalize_command " $arg"

fi

    done # argument parsing loop

    test -n "$prev" && \

      func_fatal_help "the \`$prevarg' option requires an argument"

    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then

      eval arg=\"$export_dynamic_flag_spec\"

      func_append compile_command " $arg"

      func_append finalize_command " $arg"

fi

    oldlibs=

    # calculate the name of the file, without its directory

    func_basename "$output"

    outputname="$func_basename_result"

    libobjs_save="$libobjs"

    if test -n "$shlibpath_var"; then

      # get the directories listed in $shlibpath_var

      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`

    else

      shlib_search_path=

fi

    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"

    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"

    func_dirname "$output" "/" ""

    output_objdir="$func_dirname_result$objdir"

    # Create the object directory.

    func_mkdir_p "$output_objdir"

    # Determine the type of output

    case $output in

"")

      func_fatal_help "you must specify an output file"

;;

    *.$libext) linkmode=oldlib ;;

    *.lo | *.$objext) linkmode=obj ;;

    *.la) linkmode=lib ;;

    *) linkmode=prog ;; # Anything else should be a program.

    esac

    specialdeplibs=

    libs=

    # Find all interdependent deplibs by searching for libraries

    # that are linked more than once (e.g. -la -lb -la)

    for deplib in $deplibs; do

      if $opt_duplicate_deps ; then

        case "$libs " in

        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;

        esac

fi

      libs="$libs $deplib"

    done

    if test "$linkmode" = lib; then

      libs="$predeps $libs $compiler_lib_search_path $postdeps"

      # Compute libraries that are listed more than once in $predeps

      # $postdeps and mark them as special (i.e., whose duplicates are

      # not to be eliminated).

      pre_post_deps=

      if $opt_duplicate_compiler_generated_deps; then

        for pre_post_dep in $predeps $postdeps; do

          case "$pre_post_deps " in

          *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;

          esac

          pre_post_deps="$pre_post_deps $pre_post_dep"

        done

fi

      pre_post_deps=

fi

    deplibs=

    newdependency_libs=

    newlib_search_path=

    need_relink=no # whether we're linking any uninstalled libtool libraries

    notinst_deplibs= # not-installed libtool libraries

    notinst_path= # paths that contain not-installed libtool libraries

    case $linkmode in

    lib)

        passes="conv dlpreopen link"

        for file in $dlfiles $dlprefiles; do

          case $file in

          *.la) ;;

*)

            func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"

;;

          esac

        done

;;

    prog)

        compile_deplibs=

        finalize_deplibs=

        alldeplibs=no

        newdlfiles=

        newdlprefiles=

        passes="conv scan dlopen dlpreopen link"

;;

    *)  passes="conv"

;;

    esac

    for pass in $passes; do

      # The preopen pass in lib mode reverses $deplibs; put it back here

      # so that -L comes before libs that need it for instance...

      if test "$linkmode,$pass" = "lib,link"; then

        ## FIXME: Find the place where the list is rebuilt in the wrong

        ##        order, and fix it there properly

        tmp_deplibs=

        for deplib in $deplibs; do

          tmp_deplibs="$deplib $tmp_deplibs"

        done

        deplibs="$tmp_deplibs"

fi

      if test "$linkmode,$pass" = "lib,link" ||

         test "$linkmode,$pass" = "prog,scan"; then

        libs="$deplibs"

        deplibs=

fi

      if test "$linkmode" = prog; then

        case $pass in

        dlopen) libs="$dlfiles" ;;

        dlpreopen) libs="$dlprefiles" ;;

        link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;

        esac

fi

      if test "$linkmode,$pass" = "lib,dlpreopen"; then

        # Collect and forward deplibs of preopened libtool libs

        for lib in $dlprefiles; do

          # Ignore non-libtool-libs

          dependency_libs=

          case $lib in

          *.la) func_source "$lib" ;;

          esac

          # Collect preopened libtool deplibs, except any this library

          # has declared as weak libs

          for deplib in $dependency_libs; do

            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`

            case " $weak_libs " in

            *" $deplib_base "*) ;;

            *) deplibs="$deplibs $deplib" ;;

            esac

          done

        done

        libs="$dlprefiles"

fi

      if test "$pass" = dlopen; then

        # Collect dlpreopened libraries

        save_deplibs="$deplibs"

        deplibs=

fi

      for deplib in $libs; do

        lib=

        found=no

        case $deplib in

        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)

          if test "$linkmode,$pass" = "prog,link"; then

            compile_deplibs="$deplib $compile_deplibs"

            finalize_deplibs="$deplib $finalize_deplibs"

          else

            compiler_flags="$compiler_flags $deplib"

            if test "$linkmode" = lib ; then

                case "$new_inherited_linker_flags " in

                    *" $deplib "*) ;;

                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;

                esac

fi

fi

          continue

;;

        -l*)

          if test "$linkmode" != lib && test "$linkmode" != prog; then

            func_warning "\`-l' is ignored for archives/objects"

            continue

fi

          func_stripname '-l' '' "$deplib"

          name=$func_stripname_result

          if test "$linkmode" = lib; then

            searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"

          else

            searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"

fi

          for searchdir in $searchdirs; do

            for search_ext in .la $std_shrext .so .a; do

              # Search the libtool library

              lib="$searchdir/lib${name}${search_ext}"

              if test -f "$lib"; then

                if test "$search_ext" = ".la"; then

                  found=yes

                else

                  found=no

fi

                break 2

fi

            done

          done

          if test "$found" != yes; then

            # deplib doesn't seem to be a libtool library

            if test "$linkmode,$pass" = "prog,link"; then

              compile_deplibs="$deplib $compile_deplibs"

              finalize_deplibs="$deplib $finalize_deplibs"

            else

              deplibs="$deplib $deplibs"

              test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"

fi

            continue

          else # deplib is a libtool library

            # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,

            # We need to do some special things here, and not later.

            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then

              case " $predeps $postdeps " in

              *" $deplib "*)

                if func_lalib_p "$lib"; then

                  library_names=

                  old_library=

                  func_source "$lib"

                  for l in $old_library $library_names; do

                    ll="$l"

                  done

                  if test "X$ll" = "X$old_library" ; then # only static version available

                    found=no

                    func_dirname "$lib" "" "."

                    ladir="$func_dirname_result"

                    lib=$ladir/$old_library

                    if test "$linkmode,$pass" = "prog,link"; then

                      compile_deplibs="$deplib $compile_deplibs"

                      finalize_deplibs="$deplib $finalize_deplibs"

                    else

                      deplibs="$deplib $deplibs"

                      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"

fi

                    continue

fi

fi

;;

              *) ;;

              esac

fi

fi

          ;; # -l

        *.ltframework)

          if test "$linkmode,$pass" = "prog,link"; then

            compile_deplibs="$deplib $compile_deplibs"

            finalize_deplibs="$deplib $finalize_deplibs"

          else

            deplibs="$deplib $deplibs"

            if test "$linkmode" = lib ; then

                case "$new_inherited_linker_flags " in

                    *" $deplib "*) ;;

                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;

                esac

fi

fi

          continue

;;

        -L*)

          case $linkmode in

          lib)

            deplibs="$deplib $deplibs"

            test "$pass" = conv && continue

            newdependency_libs="$deplib $newdependency_libs"

            func_stripname '-L' '' "$deplib"

            newlib_search_path="$newlib_search_path $func_stripname_result"

;;

          prog)

            if test "$pass" = conv; then

              deplibs="$deplib $deplibs"

              continue

fi

            if test "$pass" = scan; then

              deplibs="$deplib $deplibs"

            else

              compile_deplibs="$deplib $compile_deplibs"

              finalize_deplibs="$deplib $finalize_deplibs"

fi

            func_stripname '-L' '' "$deplib"

            newlib_search_path="$newlib_search_path $func_stripname_result"

;;

*)

            func_warning "\`-L' is ignored for archives/objects"

;;

          esac # linkmode

          continue

          ;; # -L

        -R*)

          if test "$pass" = link; then

            func_stripname '-R' '' "$deplib"

            dir=$func_stripname_result

            # Make sure the xrpath contains only unique directories.

            case "$xrpath " in

            *" $dir "*) ;;

            *) xrpath="$xrpath $dir" ;;

            esac

fi

          deplibs="$deplib $deplibs"

          continue

;;

        *.la) lib="$deplib" ;;

        *.$libext)

          if test "$pass" = conv; then

            deplibs="$deplib $deplibs"

            continue

fi

          case $linkmode in

          lib)

            # Linking convenience modules into shared libraries is allowed,

            # but linking other static libraries is non-portable.

            case " $dlpreconveniencelibs " in

            *" $deplib "*) ;;

*)

              valid_a_lib=no

              case $deplibs_check_method in

                match_pattern*)

                  set dummy $deplibs_check_method; shift

                  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`

                  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \

                    | $EGREP "$match_pattern_regex" > /dev/null; then

                    valid_a_lib=yes

fi

;;

                pass_all)

                  valid_a_lib=yes

;;

              esac

              if test "$valid_a_lib" != yes; then

                $ECHO

                $ECHO "*** Warning: Trying to link with static lib archive $deplib."

                $ECHO "*** I have the capability to make that library automatically link in when"

                $ECHO "*** you link to this library.  But I can only do this if you have a"

                $ECHO "*** shared version of the library, which you do not appear to have"

                $ECHO "*** because the file extensions .$libext of this argument makes me believe"

                $ECHO "*** that it is just a static archive that I should not use here."

              else

                $ECHO

                $ECHO "*** Warning: Linking the shared library $output against the"

                $ECHO "*** static library $deplib is not portable!"

                deplibs="$deplib $deplibs"

fi

;;

            esac

            continue

;;

          prog)

            if test "$pass" != link; then

              deplibs="$deplib $deplibs"

            else

              compile_deplibs="$deplib $compile_deplibs"

              finalize_deplibs="$deplib $finalize_deplibs"

fi

            continue

;;

          esac # linkmode

          ;; # *.$libext

        *.lo | *.$objext)

          if test "$pass" = conv; then

            deplibs="$deplib $deplibs"

          elif test "$linkmode" = prog; then

            if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then

              # If there is no dlopen support or we're linking statically,

              # we need to preload.

              newdlprefiles="$newdlprefiles $deplib"

              compile_deplibs="$deplib $compile_deplibs"

              finalize_deplibs="$deplib $finalize_deplibs"

            else

              newdlfiles="$newdlfiles $deplib"

fi

fi

          continue

;;

        %DEPLIBS%)

          alldeplibs=yes

          continue

;;

        esac # case $deplib

        if test "$found" = yes || test -f "$lib"; then :

        else

          func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"

fi

        # Check to see that this really is a libtool archive.

        func_lalib_unsafe_p "$lib" \

          || func_fatal_error "\`$lib' is not a valid libtool archive"

        func_dirname "$lib" "" "."

        ladir="$func_dirname_result"

        dlname=

        dlopen=

        dlpreopen=

        libdir=

        library_names=

        old_library=

        inherited_linker_flags=

        # If the library was installed with an old release of libtool,

        # it will not redefine variables installed, or shouldnotlink

        installed=yes

        shouldnotlink=no

        avoidtemprpath=

        # Read the .la file

        func_source "$lib"

        # Convert "-framework foo" to "foo.ltframework"

        if test -n "$inherited_linker_flags"; then

          tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`

          for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do

            case " $new_inherited_linker_flags " in

              *" $tmp_inherited_linker_flag "*) ;;

              *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;

            esac

          done

fi

        dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`

        if test "$linkmode,$pass" = "lib,link" ||

           test "$linkmode,$pass" = "prog,scan" ||

           { test "$linkmode" != prog && test "$linkmode" != lib; }; then

          test -n "$dlopen" && dlfiles="$dlfiles $dlopen"

          test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"

fi

        if test "$pass" = conv; then

          # Only check for convenience libraries

          deplibs="$lib $deplibs"

          if test -z "$libdir"; then

            if test -z "$old_library"; then

              func_fatal_error "cannot find name of link library for \`$lib'"

fi

            # It is a libtool convenience library, so add in its objects.

            convenience="$convenience $ladir/$objdir/$old_library"

            old_convenience="$old_convenience $ladir/$objdir/$old_library"

          elif test "$linkmode" != prog && test "$linkmode" != lib; then

            func_fatal_error "\`$lib' is not a convenience library"

fi

          tmp_libs=

          for deplib in $dependency_libs; do

            deplibs="$deplib $deplibs"

            if $opt_duplicate_deps ; then

              case "$tmp_libs " in

              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;

              esac

fi

            tmp_libs="$tmp_libs $deplib"

          done

          continue

        fi # $pass = conv

        # Get the name of the library we link against.

        linklib=

        for l in $old_library $library_names; do

          linklib="$l"

        done

        if test -z "$linklib"; then

          func_fatal_error "cannot find name of link library for \`$lib'"

fi

        # This library was specified with -dlopen.

        if test "$pass" = dlopen; then

          if test -z "$libdir"; then

            func_fatal_error "cannot -dlopen a convenience library: \`$lib'"

fi

          if test -z "$dlname" ||

             test "$dlopen_support" != yes ||

             test "$build_libtool_libs" = no; then

            # If there is no dlname, no dlopen support or we're linking

            # statically, we need to preload.  We also need to preload any

            # dependent libraries so libltdl's deplib preloader doesn't

            # bomb out in the load deplibs phase.

            dlprefiles="$dlprefiles $lib $dependency_libs"

          else

            newdlfiles="$newdlfiles $lib"

fi

          continue

        fi # $pass = dlopen

        # We need an absolute path.

        case $ladir in

        [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;

*)

          abs_ladir=`cd "$ladir" && pwd`

          if test -z "$abs_ladir"; then

            func_warning "cannot determine absolute directory name of \`$ladir'"

            func_warning "passing it literally to the linker, although it might fail"

            abs_ladir="$ladir"

fi

;;

        esac

        func_basename "$lib"

        laname="$func_basename_result"

        # Find the relevant object directory and library name.

        if test "X$installed" = Xyes; then

          if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then

            func_warning "library \`$lib' was moved."

            dir="$ladir"

            absdir="$abs_ladir"

            libdir="$abs_ladir"

          else

            dir="$libdir"

            absdir="$libdir"

fi

          test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes

        else

          if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then

            dir="$ladir"

            absdir="$abs_ladir"

            # Remove this search path later

            notinst_path="$notinst_path $abs_ladir"

          else

            dir="$ladir/$objdir"

            absdir="$abs_ladir/$objdir"

            # Remove this search path later

            notinst_path="$notinst_path $abs_ladir"

fi

        fi # $installed = yes

        func_stripname 'lib' '.la' "$laname"

        name=$func_stripname_result

        # This library was specified with -dlpreopen.

        if test "$pass" = dlpreopen; then

          if test -z "$libdir" && test "$linkmode" = prog; then

            func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"

fi

          # Prefer using a static library (so that no silly _DYNAMIC symbols

          # are required to link).

          if test -n "$old_library"; then

            newdlprefiles="$newdlprefiles $dir/$old_library"

            # Keep a list of preopened convenience libraries to check

            # that they are being used correctly in the link pass.

            test -z "$libdir" && \

                dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"

          # Otherwise, use the dlname, so that lt_dlopen finds it.

          elif test -n "$dlname"; then

            newdlprefiles="$newdlprefiles $dir/$dlname"

          else

            newdlprefiles="$newdlprefiles $dir/$linklib"

fi

        fi # $pass = dlpreopen

        if test -z "$libdir"; then

          # Link the convenience library

          if test "$linkmode" = lib; then

            deplibs="$dir/$old_library $deplibs"

          elif test "$linkmode,$pass" = "prog,link"; then

            compile_deplibs="$dir/$old_library $compile_deplibs"

            finalize_deplibs="$dir/$old_library $finalize_deplibs"

          else

            deplibs="$lib $deplibs" # used for prog,scan pass

fi

          continue

fi

        if test "$linkmode" = prog && test "$pass" != link; then

          newlib_search_path="$newlib_search_path $ladir"

          deplibs="$lib $deplibs"

          linkalldeplibs=no

          if test "$link_all_deplibs" != no || test -z "$library_names" ||

             test "$build_libtool_libs" = no; then

            linkalldeplibs=yes

fi

          tmp_libs=

          for deplib in $dependency_libs; do

            case $deplib in

            -L*) func_stripname '-L' '' "$deplib"

                 newlib_search_path="$newlib_search_path $func_stripname_result"

;;

            esac

            # Need to link against all dependency_libs?

            if test "$linkalldeplibs" = yes; then

              deplibs="$deplib $deplibs"

            else

              # Need to hardcode shared library paths

              # or/and link against static libraries

              newdependency_libs="$deplib $newdependency_libs"

fi

            if $opt_duplicate_deps ; then

              case "$tmp_libs " in

              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;

              esac

fi

            tmp_libs="$tmp_libs $deplib"

          done # for deplib

          continue

        fi # $linkmode = prog...

        if test "$linkmode,$pass" = "prog,link"; then

          if test -n "$library_names" &&

             { { test "$prefer_static_libs" = no ||

                 test "$prefer_static_libs,$installed" = "built,yes"; } ||

               test -z "$old_library"; }; then

            # We need to hardcode the library path

            if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then

              # Make sure the rpath contains only unique directories.

              case "$temp_rpath:" in

              *"$absdir:"*) ;;

              *) temp_rpath="$temp_rpath$absdir:" ;;

              esac

fi

            # Hardcode the library path.

            # Skip directories that are in the system default run-time

            # search path.

            case " $sys_lib_dlsearch_path " in

            *" $absdir "*) ;;

*)

              case "$compile_rpath " in

              *" $absdir "*) ;;

              *) compile_rpath="$compile_rpath $absdir"

              esac

;;

            esac

            case " $sys_lib_dlsearch_path " in

            *" $libdir "*) ;;

*)

              case "$finalize_rpath " in

              *" $libdir "*) ;;

              *) finalize_rpath="$finalize_rpath $libdir"

              esac

;;

            esac

          fi # $linkmode,$pass = prog,link...

          if test "$alldeplibs" = yes &&

             { test "$deplibs_check_method" = pass_all ||

               { test "$build_libtool_libs" = yes &&

                 test -n "$library_names"; }; }; then

            # We only need to search for static libraries

            continue

fi

fi

        link_static=no # Whether the deplib will be linked statically

        use_static_libs=$prefer_static_libs

        if test "$use_static_libs" = built && test "$installed" = yes; then

          use_static_libs=no

fi

        if test -n "$library_names" &&

           { test "$use_static_libs" = no || test -z "$old_library"; }; then

          case $host in

          *cygwin* | *mingw* | *cegcc*)

              # No point in relinking DLLs because paths are not encoded

              notinst_deplibs="$notinst_deplibs $lib"

              need_relink=no

;;

*)

            if test "$installed" = no; then

              notinst_deplibs="$notinst_deplibs $lib"

              need_relink=yes

fi

;;

          esac

          # This is a shared library

          # Warn about portability, can't link against -module's on some

          # systems (darwin).  Don't bleat about dlopened modules though!

          dlopenmodule=""

          for dlpremoduletest in $dlprefiles; do

            if test "X$dlpremoduletest" = "X$lib"; then

              dlopenmodule="$dlpremoduletest"

              break

fi

          done

          if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then

            $ECHO

            if test "$linkmode" = prog; then

              $ECHO "*** Warning: Linking the executable $output against the loadable module"

            else

              $ECHO "*** Warning: Linking the shared library $output against the loadable module"

fi

            $ECHO "*** $linklib is not portable!"

fi

          if test "$linkmode" = lib &&

             test "$hardcode_into_libs" = yes; then

            # Hardcode the library path.

            # Skip directories that are in the system default run-time

            # search path.

            case " $sys_lib_dlsearch_path " in

            *" $absdir "*) ;;

*)

              case "$compile_rpath " in

              *" $absdir "*) ;;

              *) compile_rpath="$compile_rpath $absdir"

              esac

;;

            esac

            case " $sys_lib_dlsearch_path " in

            *" $libdir "*) ;;

*)

              case "$finalize_rpath " in

              *" $libdir "*) ;;

              *) finalize_rpath="$finalize_rpath $libdir"

              esac

;;

            esac

fi

          if test -n "$old_archive_from_expsyms_cmds"; then

            # figure out the soname

            set dummy $library_names

            shift

            realname="$1"

            shift

            libname=`eval "\\$ECHO \"$libname_spec\""`

            # use dlname if we got it. it's perfectly good, no?

            if test -n "$dlname"; then

              soname="$dlname"

            elif test -n "$soname_spec"; then

              # bleh windows

              case $host in

              *cygwin* | mingw* | *cegcc*)

                func_arith $current - $age

                major=$func_arith_result

                versuffix="-$major"

;;

              esac

              eval soname=\"$soname_spec\"

            else

              soname="$realname"

fi

            # Make a new name for the extract_expsyms_cmds to use

            soroot="$soname"

            func_basename "$soroot"

            soname="$func_basename_result"

            func_stripname 'lib' '.dll' "$soname"

            newlib=libimp-$func_stripname_result.a

            # If the library has no export list, then create one now

            if test -f "$output_objdir/$soname-def"; then :

            else

              func_verbose "extracting exported symbol list from \`$soname'"

              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'

fi

            # Create $newlib

            if test -f "$output_objdir/$newlib"; then :; else

              func_verbose "generating import library for \`$soname'"

              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'

fi

            # make sure the library variables are pointing to the new library

            dir=$output_objdir

            linklib=$newlib

          fi # test -n "$old_archive_from_expsyms_cmds"

          if test "$linkmode" = prog || test "$mode" != relink; then

            add_shlibpath=

            add_dir=

            add=

            lib_linked=yes

            case $hardcode_action in

            immediate | unsupported)

              if test "$hardcode_direct" = no; then

                add="$dir/$linklib"

                case $host in

                  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;

                  *-*-sysv4*uw2*) add_dir="-L$dir" ;;

                  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \

                    *-*-unixware7*) add_dir="-L$dir" ;;

                  *-*-darwin* )

                    # if the lib is a (non-dlopened) module then we can not

                    # link against it, someone is ignoring the earlier warnings

                    if /usr/bin/file -L $add 2> /dev/null |

                         $GREP ": [^:]* bundle" >/dev/null ; then

                      if test "X$dlopenmodule" != "X$lib"; then

                        $ECHO "*** Warning: lib $linklib is a module, not a shared library"

                        if test -z "$old_library" ; then

                          $ECHO

                          $ECHO "*** And there doesn't seem to be a static archive available"

                          $ECHO "*** The link will probably fail, sorry"

                        else

                          add="$dir/$old_library"

fi

                      elif test -n "$old_library"; then

                        add="$dir/$old_library"

fi

fi

                esac

              elif test "$hardcode_minus_L" = no; then

                case $host in

                *-*-sunos*) add_shlibpath="$dir" ;;

                esac

                add_dir="-L$dir"

                add="-l$name"

              elif test "$hardcode_shlibpath_var" = no; then

                add_shlibpath="$dir"

                add="-l$name"

              else

                lib_linked=no

fi

;;

            relink)

              if test "$hardcode_direct" = yes &&

                 test "$hardcode_direct_absolute" = no; then

                add="$dir/$linklib"

              elif test "$hardcode_minus_L" = yes; then

                add_dir="-L$dir"

                # Try looking first in the location we're being installed to.

                if test -n "$inst_prefix_dir"; then

                  case $libdir in

                    [\\/]*)

                      add_dir="$add_dir -L$inst_prefix_dir$libdir"

;;

                  esac

fi

                add="-l$name"

              elif test "$hardcode_shlibpath_var" = yes; then

                add_shlibpath="$dir"

                add="-l$name"

              else

                lib_linked=no

fi

;;

            *) lib_linked=no ;;

            esac

            if test "$lib_linked" != yes; then

              func_fatal_configuration "unsupported hardcode properties"

fi

            if test -n "$add_shlibpath"; then

              case :$compile_shlibpath: in

              *":$add_shlibpath:"*) ;;

              *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;

              esac

fi

            if test "$linkmode" = prog; then

              test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"

              test -n "$add" && compile_deplibs="$add $compile_deplibs"

            else

              test -n "$add_dir" && deplibs="$add_dir $deplibs"

              test -n "$add" && deplibs="$add $deplibs"

              if test "$hardcode_direct" != yes &&

                 test "$hardcode_minus_L" != yes &&

                 test "$hardcode_shlibpath_var" = yes; then

                case :$finalize_shlibpath: in

                *":$libdir:"*) ;;

                *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;

                esac

fi

fi

fi

          if test "$linkmode" = prog || test "$mode" = relink; then

            add_shlibpath=

            add_dir=

            add=

            # Finalize command for both is simple: just hardcode it.

            if test "$hardcode_direct" = yes &&

               test "$hardcode_direct_absolute" = no; then

              add="$libdir/$linklib"

            elif test "$hardcode_minus_L" = yes; then

              add_dir="-L$libdir"

              add="-l$name"

            elif test "$hardcode_shlibpath_var" = yes; then

              case :$finalize_shlibpath: in

              *":$libdir:"*) ;;

              *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;

              esac

              add="-l$name"

            elif test "$hardcode_automatic" = yes; then

              if test -n "$inst_prefix_dir" &&

                 test -f "$inst_prefix_dir$libdir/$linklib" ; then

                add="$inst_prefix_dir$libdir/$linklib"

              else

                add="$libdir/$linklib"

fi

            else

              # We cannot seem to hardcode it, guess we'll fake it.

              add_dir="-L$libdir"

              # Try looking first in the location we're being installed to.

              if test -n "$inst_prefix_dir"; then

                case $libdir in

                  [\\/]*)

                    add_dir="$add_dir -L$inst_prefix_dir$libdir"

;;

                esac

fi

              add="-l$name"

fi

            if test "$linkmode" = prog; then

              test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"

              test -n "$add" && finalize_deplibs="$add $finalize_deplibs"

            else

              test -n "$add_dir" && deplibs="$add_dir $deplibs"

              test -n "$add" && deplibs="$add $deplibs"

fi

fi

        elif test "$linkmode" = prog; then

          # Here we assume that one of hardcode_direct or hardcode_minus_L

          # is not unsupported.  This is valid on all known static and

          # shared platforms.

          if test "$hardcode_direct" != unsupported; then

            test -n "$old_library" && linklib="$old_library"

            compile_deplibs="$dir/$linklib $compile_deplibs"

            finalize_deplibs="$dir/$linklib $finalize_deplibs"

          else

            compile_deplibs="-l$name -L$dir $compile_deplibs"

            finalize_deplibs="-l$name -L$dir $finalize_deplibs"

fi

        elif test "$build_libtool_libs" = yes; then

          # Not a shared library

          if test "$deplibs_check_method" != pass_all; then

            # We're trying link a shared library against a static one

            # but the system doesn't support it.

            # Just print a warning and add the library to dependency_libs so

            # that the program can be linked against the static library.

            $ECHO

            $ECHO "*** Warning: This system can not link to static lib archive $lib."

            $ECHO "*** I have the capability to make that library automatically link in when"

            $ECHO "*** you link to this library.  But I can only do this if you have a"

            $ECHO "*** shared version of the library, which you do not appear to have."

            if test "$module" = yes; then

              $ECHO "*** But as you try to build a module library, libtool will still create "

              $ECHO "*** a static module, that should work as long as the dlopening application"

              $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."

              if test -z "$global_symbol_pipe"; then

                $ECHO

                $ECHO "*** However, this would only work if libtool was able to extract symbol"

                $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"

                $ECHO "*** not find such a program.  So, this module is probably useless."

                $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."

fi

              if test "$build_old_libs" = no; then

                build_libtool_libs=module

                build_old_libs=yes

              else

                build_libtool_libs=no

fi

fi

          else

            deplibs="$dir/$old_library $deplibs"

            link_static=yes

fi

        fi # link shared/static library?

        if test "$linkmode" = lib; then

          if test -n "$dependency_libs" &&

             { test "$hardcode_into_libs" != yes ||

               test "$build_old_libs" = yes ||

               test "$link_static" = yes; }; then

            # Extract -R from dependency_libs

            temp_deplibs=

            for libdir in $dependency_libs; do

              case $libdir in

              -R*) func_stripname '-R' '' "$libdir"

                   temp_xrpath=$func_stripname_result

                   case " $xrpath " in

                   *" $temp_xrpath "*) ;;

                   *) xrpath="$xrpath $temp_xrpath";;

                   esac;;

              *) temp_deplibs="$temp_deplibs $libdir";;

              esac

            done

            dependency_libs="$temp_deplibs"

fi

          newlib_search_path="$newlib_search_path $absdir"

          # Link against this library

          test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"

          # ... and its dependency_libs

          tmp_libs=

          for deplib in $dependency_libs; do

            newdependency_libs="$deplib $newdependency_libs"

            if $opt_duplicate_deps ; then

              case "$tmp_libs " in

              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;

              esac

fi

            tmp_libs="$tmp_libs $deplib"

          done

          if test "$link_all_deplibs" != no; then

            # Add the search paths of all dependency libraries

            for deplib in $dependency_libs; do

              case $deplib in

              -L*) path="$deplib" ;;

              *.la)

                func_dirname "$deplib" "" "."

                dir="$func_dirname_result"

                # We need an absolute path.

                case $dir in

                [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;

*)

                  absdir=`cd "$dir" && pwd`

                  if test -z "$absdir"; then

                    func_warning "cannot determine absolute directory name of \`$dir'"

                    absdir="$dir"

fi

;;

                esac

                if $GREP "^installed=no" $deplib > /dev/null; then

                case $host in

                *-*-darwin*)

                  depdepl=

                  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`

                  if test -n "$deplibrary_names" ; then

                    for tmp in $deplibrary_names ; do

                      depdepl=$tmp

                    done

                    if test -f "$absdir/$objdir/$depdepl" ; then

                      depdepl="$absdir/$objdir/$depdepl"

                      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`

                      if test -z "$darwin_install_name"; then

                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`

fi

                      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"

                      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"

                      path=

fi

fi

;;

*)

                  path="-L$absdir/$objdir"

;;

                esac

                else

                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`

                  test -z "$libdir" && \

                    func_fatal_error "\`$deplib' is not a valid libtool archive"

                  test "$absdir" != "$libdir" && \

                    func_warning "\`$deplib' seems to be moved"

                  path="-L$absdir"

fi

;;

              esac

              case " $deplibs " in

              *" $path "*) ;;

              *) deplibs="$path $deplibs" ;;

              esac

            done

          fi # link_all_deplibs != no

        fi # linkmode = lib

      done # for deplib in $libs

      if test "$pass" = link; then

        if test "$linkmode" = "prog"; then

          compile_deplibs="$new_inherited_linker_flags $compile_deplibs"

          finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"

        else

          compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`

fi

fi

      dependency_libs="$newdependency_libs"

      if test "$pass" = dlpreopen; then

        # Link the dlpreopened libraries before other libraries

        for deplib in $save_deplibs; do

          deplibs="$deplib $deplibs"

        done

fi

      if test "$pass" != dlopen; then

        if test "$pass" != conv; then

          # Make sure lib_search_path contains only unique directories.

          lib_search_path=

          for dir in $newlib_search_path; do

            case "$lib_search_path " in

            *" $dir "*) ;;

            *) lib_search_path="$lib_search_path $dir" ;;

            esac

          done

          newlib_search_path=

fi

        if test "$linkmode,$pass" != "prog,link"; then

          vars="deplibs"

        else

          vars="compile_deplibs finalize_deplibs"

fi

        for var in $vars dependency_libs; do

          # Add libraries to $var in reverse order

          eval tmp_libs=\"\$$var\"

          new_libs=

          for deplib in $tmp_libs; do

            # FIXME: Pedantically, this is the right thing to do, so

            #        that some nasty dependency loop isn't accidentally

            #        broken:

            #new_libs="$deplib $new_libs"

            # Pragmatically, this seems to cause very few problems in

            # practice:

            case $deplib in

            -L*) new_libs="$deplib $new_libs" ;;

            -R*) ;;

*)

              # And here is the reason: when a library appears more

              # than once as an explicit dependence of a library, or

              # is implicitly linked in more than once by the

              # compiler, it is considered special, and multiple

              # occurrences thereof are not removed.  Compare this

              # with having the same library being listed as a

              # dependency of multiple other libraries: in this case,

              # we know (pedantically, we assume) the library does not

              # need to be listed more than once, so we keep only the

              # last copy.  This is not always right, but it is rare

              # enough that we require users that really mean to play

              # such unportable linking tricks to link the library

              # using -Wl,-lname, so that libtool does not consider it

              # for duplicate removal.

              case " $specialdeplibs " in

              *" $deplib "*) new_libs="$deplib $new_libs" ;;

*)

                case " $new_libs " in

                *" $deplib "*) ;;

                *) new_libs="$deplib $new_libs" ;;

                esac

;;

              esac

;;

            esac

          done

          tmp_libs=

          for deplib in $new_libs; do

            case $deplib in

            -L*)

              case " $tmp_libs " in

              *" $deplib "*) ;;

              *) tmp_libs="$tmp_libs $deplib" ;;

              esac

;;

            *) tmp_libs="$tmp_libs $deplib" ;;

            esac

          done

          eval $var=\"$tmp_libs\"

        done # for var

fi

      # Last step: remove runtime libs from dependency_libs

      # (they stay in deplibs)

      tmp_libs=

      for i in $dependency_libs ; do

        case " $predeps $postdeps $compiler_lib_search_path " in

        *" $i "*)

          i=""

;;

        esac

        if test -n "$i" ; then

          tmp_libs="$tmp_libs $i"

fi

      done

      dependency_libs=$tmp_libs

    done # for pass

    if test "$linkmode" = prog; then

      dlfiles="$newdlfiles"

fi

    if test "$linkmode" = prog || test "$linkmode" = lib; then

      dlprefiles="$newdlprefiles"

fi

    case $linkmode in

    oldlib)

      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then

        func_warning "\`-dlopen' is ignored for archives"

fi

      case " $deplibs" in

      *\ -l* | *\ -L*)

        func_warning "\`-l' and \`-L' are ignored for archives" ;;

      esac

      test -n "$rpath" && \

        func_warning "\`-rpath' is ignored for archives"

      test -n "$xrpath" && \

        func_warning "\`-R' is ignored for archives"

      test -n "$vinfo" && \

        func_warning "\`-version-info/-version-number' is ignored for archives"

      test -n "$release" && \

        func_warning "\`-release' is ignored for archives"

      test -n "$export_symbols$export_symbols_regex" && \

        func_warning "\`-export-symbols' is ignored for archives"

      # Now set the variables for building old libraries.

      build_libtool_libs=no

      oldlibs="$output"

      objs="$objs$old_deplibs"

;;

    lib)

      # Make sure we only generate libraries of the form `libNAME.la'.

      case $outputname in

      lib*)

        func_stripname 'lib' '.la' "$outputname"

        name=$func_stripname_result

        eval shared_ext=\"$shrext_cmds\"

        eval libname=\"$libname_spec\"

;;

*)

        test "$module" = no && \

          func_fatal_help "libtool library \`$output' must begin with \`lib'"

        if test "$need_lib_prefix" != no; then

          # Add the "lib" prefix for modules if required

          func_stripname '' '.la' "$outputname"

          name=$func_stripname_result

          eval shared_ext=\"$shrext_cmds\"

          eval libname=\"$libname_spec\"

        else

          func_stripname '' '.la' "$outputname"

          libname=$func_stripname_result

fi

;;

      esac

      if test -n "$objs"; then

        if test "$deplibs_check_method" != pass_all; then

          func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"

        else

          $ECHO

          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"

          $ECHO "*** objects $objs is not portable!"

          libobjs="$libobjs $objs"

fi

fi

      test "$dlself" != no && \

        func_warning "\`-dlopen self' is ignored for libtool libraries"

      set dummy $rpath

      shift

      test "$#" -gt 1 && \

        func_warning "ignoring multiple \`-rpath's for a libtool library"

      install_libdir="$1"

      oldlibs=

      if test -z "$rpath"; then

        if test "$build_libtool_libs" = yes; then

          # Building a libtool convenience library.

          # Some compilers have problems with a `.al' extension so

          # convenience libraries should have the same extension an

          # archive normally would.

          oldlibs="$output_objdir/$libname.$libext $oldlibs"

          build_libtool_libs=convenience

          build_old_libs=yes

fi

        test -n "$vinfo" && \

          func_warning "\`-version-info/-version-number' is ignored for convenience libraries"

        test -n "$release" && \

          func_warning "\`-release' is ignored for convenience libraries"

      else

        # Parse the version information argument.

        save_ifs="$IFS"; IFS=':'

        set dummy $vinfo 0 0 0

        shift

        IFS="$save_ifs"

        test -n "$7" && \

          func_fatal_help "too many parameters to \`-version-info'"

        # convert absolute version numbers to libtool ages

        # this retains compatibility with .la files and attempts

        # to make the code below a bit more comprehensible

        case $vinfo_number in

        yes)

          number_major="$1"

          number_minor="$2"

          number_revision="$3"

          # There are really only two kinds -- those that

          # use the current revision as the major version

          # and those that subtract age and use age as

          # a minor version.  But, then there is irix

          # which has an extra 1 added just for fun

          case $version_type in

          darwin|linux|osf|windows|none)

            func_arith $number_major + $number_minor

            current=$func_arith_result

            age="$number_minor"

            revision="$number_revision"

;;

          freebsd-aout|freebsd-elf|sunos)

            current="$number_major"

            revision="$number_minor"

            age="0"

;;

          irix|nonstopux)

            func_arith $number_major + $number_minor

            current=$func_arith_result

            age="$number_minor"

            revision="$number_minor"

            lt_irix_increment=no

;;

          esac

;;

no)

          current="$1"

          revision="$2"

          age="$3"

;;

        esac

        # Check that each of the things are valid numbers.

        case $current in

        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;

*)

          func_error "CURRENT \`$current' must be a nonnegative integer"

          func_fatal_error "\`$vinfo' is not valid version information"

;;

        esac

        case $revision in

        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;

*)

          func_error "REVISION \`$revision' must be a nonnegative integer"

          func_fatal_error "\`$vinfo' is not valid version information"

;;

        esac

        case $age in

        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;

*)

          func_error "AGE \`$age' must be a nonnegative integer"

          func_fatal_error "\`$vinfo' is not valid version information"

;;

        esac

        if test "$age" -gt "$current"; then

          func_error "AGE \`$age' is greater than the current interface number \`$current'"

          func_fatal_error "\`$vinfo' is not valid version information"

fi

        # Calculate the version variables.

        major=

        versuffix=

        verstring=

        case $version_type in

        none) ;;

        darwin)

          # Like Linux, but with the current version available in

          # verstring for coding it into the library header

          func_arith $current - $age

          major=.$func_arith_result

          versuffix="$major.$age.$revision"

          # Darwin ld doesn't like 0 for these options...

          func_arith $current + 1

          minor_current=$func_arith_result

          xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"

          verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"

;;

        freebsd-aout)

          major=".$current"

          versuffix=".$current.$revision";

;;

        freebsd-elf)

          major=".$current"

          versuffix=".$current"

;;

        irix | nonstopux)

          if test "X$lt_irix_increment" = "Xno"; then

            func_arith $current - $age

          else

            func_arith $current - $age + 1

fi

          major=$func_arith_result

          case $version_type in

            nonstopux) verstring_prefix=nonstopux ;;

            *)         verstring_prefix=sgi ;;

          esac

          verstring="$verstring_prefix$major.$revision"

          # Add in all the interfaces that we are compatible with.

          loop=$revision

          while test "$loop" -ne 0; do

            func_arith $revision - $loop

            iface=$func_arith_result

            func_arith $loop - 1

            loop=$func_arith_result

            verstring="$verstring_prefix$major.$iface:$verstring"

          done

          # Before this point, $major must not contain `.'.

          major=.$major

          versuffix="$major.$revision"

;;

        linux)

          func_arith $current - $age

          major=.$func_arith_result

          versuffix="$major.$age.$revision"

;;

        osf)

          func_arith $current - $age

          major=.$func_arith_result

          versuffix=".$current.$age.$revision"

          verstring="$current.$age.$revision"

          # Add in all the interfaces that we are compatible with.

          loop=$age

          while test "$loop" -ne 0; do

            func_arith $current - $loop

            iface=$func_arith_result

            func_arith $loop - 1

            loop=$func_arith_result

            verstring="$verstring:${iface}.0"

          done

          # Make executables depend on our current version.

          verstring="$verstring:${current}.0"

;;

        qnx)

          major=".$current"

          versuffix=".$current"

;;

        sunos)

          major=".$current"

          versuffix=".$current.$revision"

;;

        windows)

          # Use '-' rather than '.', since we only want one

          # extension on DOS 8.3 filesystems.

          func_arith $current - $age

          major=$func_arith_result

          versuffix="-$major"

;;

*)

          func_fatal_configuration "unknown library version type \`$version_type'"

;;

        esac

        # Clear the version info if we defaulted, and they specified a release.

        if test -z "$vinfo" && test -n "$release"; then

          major=

          case $version_type in

          darwin)

            # we can't check for "0.0" in archive_cmds due to quoting

            # problems, so we reset it completely

            verstring=

;;

*)

            verstring="0.0"

;;

          esac

          if test "$need_version" = no; then

            versuffix=

          else

            versuffix=".0.0"

fi

fi

        # Remove version info from name if versioning should be avoided

        if test "$avoid_version" = yes && test "$need_version" = no; then

          major=

          versuffix=

          verstring=""

fi

        # Check to see if the archive will have undefined symbols.

        if test "$allow_undefined" = yes; then

          if test "$allow_undefined_flag" = unsupported; then

            func_warning "undefined symbols not allowed in $host shared libraries"

            build_libtool_libs=no

            build_old_libs=yes

fi

        else

          # Don't allow undefined symbols.

          allow_undefined_flag="$no_undefined_flag"

fi

fi

      func_generate_dlsyms "$libname" "$libname" "yes"

      libobjs="$libobjs $symfileobj"

      test "X$libobjs" = "X " && libobjs=

      if test "$mode" != relink; then

        # Remove our outputs, but don't remove object files since they

        # may have been created when compiling PIC objects.

        removelist=

        tempremovelist=`$ECHO "$output_objdir/*"`

        for p in $tempremovelist; do

          case $p in

            *.$objext | *.gcno)

;;

            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)

               if test "X$precious_files_regex" != "X"; then

                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1

                 then

                   continue

fi

fi

               removelist="$removelist $p"

;;

            *) ;;

          esac

        done

        test -n "$removelist" && \

          func_show_eval "${RM}r \$removelist"

fi

      # Now set the variables for building old libraries.

      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then

        oldlibs="$oldlibs $output_objdir/$libname.$libext"

        # Transform .lo files to .o files.

        oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`

fi

      # Eliminate all temporary directories.

      #for path in $notinst_path; do

      # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`

      # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`

      # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`

      #done

      if test -n "$xrpath"; then

        # If the user specified any rpath flags, then add them.

        temp_xrpath=

        for libdir in $xrpath; do

          temp_xrpath="$temp_xrpath -R$libdir"

          case "$finalize_rpath " in

          *" $libdir "*) ;;

          *) finalize_rpath="$finalize_rpath $libdir" ;;

          esac

        done

        if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then

          dependency_libs="$temp_xrpath $dependency_libs"

fi

fi

      # Make sure dlfiles contains only unique files that won't be dlpreopened

      old_dlfiles="$dlfiles"

      dlfiles=

      for lib in $old_dlfiles; do

        case " $dlprefiles $dlfiles " in

        *" $lib "*) ;;

        *) dlfiles="$dlfiles $lib" ;;

        esac

      done

      # Make sure dlprefiles contains only unique files

      old_dlprefiles="$dlprefiles"

      dlprefiles=

      for lib in $old_dlprefiles; do

        case "$dlprefiles " in

        *" $lib "*) ;;

        *) dlprefiles="$dlprefiles $lib" ;;

        esac

      done

      if test "$build_libtool_libs" = yes; then

        if test -n "$rpath"; then

          case $host in

          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)

            # these systems don't actually have a c library (as such)!

;;

          *-*-rhapsody* | *-*-darwin1.[012])

            # Rhapsody C library is in the System framework

            deplibs="$deplibs System.ltframework"

;;

          *-*-netbsd*)

            # Don't link with libc until the a.out ld.so is fixed.

;;

          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)

            # Do not include libc due to us having libc/libc_r.

;;

          *-*-sco3.2v5* | *-*-sco5v6*)

            # Causes problems with __ctype

;;

          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)

            # Compiler inserts libc in the correct place for threads to work

;;

*)

            # Add libc to deplibs on all other systems if necessary.

            if test "$build_libtool_need_lc" = "yes"; then

              deplibs="$deplibs -lc"

fi

;;

          esac

fi

        # Transform deplibs into only deplibs that can be linked in shared.

        name_save=$name

        libname_save=$libname

        release_save=$release

        versuffix_save=$versuffix

        major_save=$major

        # I'm not sure if I'm treating the release correctly.  I think

        # release should show up in the -l (ie -lgmp5) so we don't want to

        # add it in twice.  Is that correct?

        release=""

        versuffix=""

        major=""

        newdeplibs=

        droppeddeps=no

        case $deplibs_check_method in

        pass_all)

          # Don't check for shared/static.  Everything works.

          # This might be a little naive.  We might want to check

          # whether the library exists or not.  But this is on

          # osf3 & osf4 and I'm not really sure... Just

          # implementing what was already the behavior.

          newdeplibs=$deplibs

;;

        test_compile)

          # This code stresses the "libraries are programs" paradigm to its

          # limits. Maybe even breaks it.  We compile a program, linking it

          # against the deplibs as a proxy for the library.  Then we can check

          # whether they linked in statically or dynamically with ldd.

          $opt_dry_run || $RM conftest.c

          cat > conftest.c <<EOF

          int main() { return 0; }

EOF

          $opt_dry_run || $RM conftest

          if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then

            ldd_output=`ldd conftest`

            for i in $deplibs; do

              case $i in

              -l*)

                func_stripname -l '' "$i"

                name=$func_stripname_result

                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then

                  case " $predeps $postdeps " in

                  *" $i "*)

                    newdeplibs="$newdeplibs $i"

                    i=""

;;

                  esac

fi

                if test -n "$i" ; then

                  libname=`eval "\\$ECHO \"$libname_spec\""`

                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`

                  set dummy $deplib_matches; shift

                  deplib_match=$1

                  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then

                    newdeplibs="$newdeplibs $i"

                  else

                    droppeddeps=yes

                    $ECHO

                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."

                    $ECHO "*** I have the capability to make that library automatically link in when"

                    $ECHO "*** you link to this library.  But I can only do this if you have a"

                    $ECHO "*** shared version of the library, which I believe you do not have"

                    $ECHO "*** because a test_compile did reveal that the linker did not use it for"

                    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."

fi

fi

;;

*)

                newdeplibs="$newdeplibs $i"

;;

              esac

            done

          else

            # Error occurred in the first compile.  Let's try to salvage

            # the situation: Compile a separate program for each library.

            for i in $deplibs; do

              case $i in

              -l*)

                func_stripname -l '' "$i"

                name=$func_stripname_result

                $opt_dry_run || $RM conftest

                if $LTCC $LTCFLAGS -o conftest conftest.c $i; then

                  ldd_output=`ldd conftest`

                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then

                    case " $predeps $postdeps " in

                    *" $i "*)

                      newdeplibs="$newdeplibs $i"

                      i=""

;;

                    esac

fi

                  if test -n "$i" ; then

                    libname=`eval "\\$ECHO \"$libname_spec\""`

                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`

                    set dummy $deplib_matches; shift

                    deplib_match=$1

                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then

                      newdeplibs="$newdeplibs $i"

                    else

                      droppeddeps=yes

                      $ECHO

                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."

                      $ECHO "*** I have the capability to make that library automatically link in when"

                      $ECHO "*** you link to this library.  But I can only do this if you have a"

                      $ECHO "*** shared version of the library, which you do not appear to have"

                      $ECHO "*** because a test_compile did reveal that the linker did not use this one"

                      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."

fi

fi

                else

                  droppeddeps=yes

                  $ECHO

                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"

                  $ECHO "*** make it link in!  You will probably need to install it or some"

                  $ECHO "*** library that it depends on before this library will be fully"

                  $ECHO "*** functional.  Installing it before continuing would be even better."

fi

;;

*)

                newdeplibs="$newdeplibs $i"

;;

              esac

            done

fi

;;

        file_magic*)

          set dummy $deplibs_check_method; shift

          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`

          for a_deplib in $deplibs; do

            case $a_deplib in

            -l*)

              func_stripname -l '' "$a_deplib"

              name=$func_stripname_result

              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then

                case " $predeps $postdeps " in

                *" $a_deplib "*)

                  newdeplibs="$newdeplibs $a_deplib"

                  a_deplib=""

;;

                esac

fi

              if test -n "$a_deplib" ; then

                libname=`eval "\\$ECHO \"$libname_spec\""`

                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do

                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`

                  for potent_lib in $potential_libs; do

                      # Follow soft links.

                      if ls -lLd "$potent_lib" 2>/dev/null |

                         $GREP " -> " >/dev/null; then

                        continue

fi

                      # The statement above tries to avoid entering an

                      # endless loop below, in case of cyclic links.

                      # We might still enter an endless loop, since a link

                      # loop can be closed while we follow links,

                      # but so what?

                      potlib="$potent_lib"

                      while test -h "$potlib" 2>/dev/null; do

                        potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`

                        case $potliblink in

                        [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;

                        *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;

                        esac

                      done

                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |

                         $SED -e 10q |

                         $EGREP "$file_magic_regex" > /dev/null; then

                        newdeplibs="$newdeplibs $a_deplib"

                        a_deplib=""

                        break 2

fi

                  done

                done

fi

              if test -n "$a_deplib" ; then

                droppeddeps=yes

                $ECHO

                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."

                $ECHO "*** I have the capability to make that library automatically link in when"

                $ECHO "*** you link to this library.  But I can only do this if you have a"

                $ECHO "*** shared version of the library, which you do not appear to have"

                $ECHO "*** because I did check the linker path looking for a file starting"

                if test -z "$potlib" ; then

                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"

                else

                  $ECHO "*** with $libname and none of the candidates passed a file format test"

                  $ECHO "*** using a file magic. Last file checked: $potlib"

fi

fi

;;

*)

              # Add a -L argument.

              newdeplibs="$newdeplibs $a_deplib"

;;

            esac

          done # Gone through all deplibs.

;;

        match_pattern*)

          set dummy $deplibs_check_method; shift

          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`

          for a_deplib in $deplibs; do

            case $a_deplib in

            -l*)

              func_stripname -l '' "$a_deplib"

              name=$func_stripname_result

              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then

                case " $predeps $postdeps " in

                *" $a_deplib "*)

                  newdeplibs="$newdeplibs $a_deplib"

                  a_deplib=""

;;

                esac

fi

              if test -n "$a_deplib" ; then

                libname=`eval "\\$ECHO \"$libname_spec\""`

                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do

                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`

                  for potent_lib in $potential_libs; do

                    potlib="$potent_lib" # see symlink-check above in file_magic test

                    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \

                       $EGREP "$match_pattern_regex" > /dev/null; then

                      newdeplibs="$newdeplibs $a_deplib"

                      a_deplib=""

                      break 2

fi

                  done

                done

fi

              if test -n "$a_deplib" ; then

                droppeddeps=yes

                $ECHO

                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."

                $ECHO "*** I have the capability to make that library automatically link in when"

                $ECHO "*** you link to this library.  But I can only do this if you have a"

                $ECHO "*** shared version of the library, which you do not appear to have"

                $ECHO "*** because I did check the linker path looking for a file starting"

                if test -z "$potlib" ; then

                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"

                else

                  $ECHO "*** with $libname and none of the candidates passed a file format test"

                  $ECHO "*** using a regex pattern. Last file checked: $potlib"

fi

fi

;;

*)

              # Add a -L argument.

              newdeplibs="$newdeplibs $a_deplib"

;;

            esac

          done # Gone through all deplibs.

;;

        none | unknown | *)

          newdeplibs=""

          tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \

              -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`

          if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then

            for i in $predeps $postdeps ; do

              # can't use Xsed below, because $i might contain '/'

              tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`

            done

fi

          if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[      ]//g' |

             $GREP . >/dev/null; then

            $ECHO

            if test "X$deplibs_check_method" = "Xnone"; then

              $ECHO "*** Warning: inter-library dependencies are not supported in this platform."

            else

              $ECHO "*** Warning: inter-library dependencies are not known to be supported."

fi

            $ECHO "*** All declared inter-library dependencies are being dropped."

            droppeddeps=yes

fi

;;

        esac

        versuffix=$versuffix_save

        major=$major_save

        release=$release_save

        libname=$libname_save

        name=$name_save

        case $host in

        *-*-rhapsody* | *-*-darwin1.[012])

          # On Rhapsody replace the C library with the System framework

          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`

;;

        esac

        if test "$droppeddeps" = yes; then

          if test "$module" = yes; then

            $ECHO

            $ECHO "*** Warning: libtool could not satisfy all declared inter-library"

            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"

            $ECHO "*** a static module, that should work as long as the dlopening"

            $ECHO "*** application is linked with the -dlopen flag."

            if test -z "$global_symbol_pipe"; then

              $ECHO

              $ECHO "*** However, this would only work if libtool was able to extract symbol"

              $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"

              $ECHO "*** not find such a program.  So, this module is probably useless."

              $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."

fi

            if test "$build_old_libs" = no; then

              oldlibs="$output_objdir/$libname.$libext"

              build_libtool_libs=module

              build_old_libs=yes

            else

              build_libtool_libs=no

fi

          else

            $ECHO "*** The inter-library dependencies that have been dropped here will be"

            $ECHO "*** automatically added whenever a program is linked with this library"

            $ECHO "*** or is declared to -dlopen it."

            if test "$allow_undefined" = no; then

              $ECHO

              $ECHO "*** Since this library must not contain undefined symbols,"

              $ECHO "*** because either the platform does not support them or"

              $ECHO "*** it was explicitly requested with -no-undefined,"

              $ECHO "*** libtool will only create a static version of it."

              if test "$build_old_libs" = no; then

                oldlibs="$output_objdir/$libname.$libext"

                build_libtool_libs=module

                build_old_libs=yes

              else

                build_libtool_libs=no

fi

fi

fi

fi

        # Done checking deplibs!

        deplibs=$newdeplibs

fi

      # Time to change all our "foo.ltframework" stuff back to "-framework foo"

      case $host in

        *-*-darwin*)

          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`

          new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`

          deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`

;;

      esac

      # move library search paths that coincide with paths to not yet

      # installed libraries to the beginning of the library search list

      new_libs=

      for path in $notinst_path; do

        case " $new_libs " in

        *" -L$path/$objdir "*) ;;

*)

          case " $deplibs " in

          *" -L$path/$objdir "*)

            new_libs="$new_libs -L$path/$objdir" ;;

          esac

;;

        esac

      done

      for deplib in $deplibs; do

        case $deplib in

        -L*)

          case " $new_libs " in

          *" $deplib "*) ;;

          *) new_libs="$new_libs $deplib" ;;

          esac

;;

        *) new_libs="$new_libs $deplib" ;;

        esac

      done

      deplibs="$new_libs"

      # All the library-specific variables (install_libdir is set above).

      library_names=

      old_library=

      dlname=

      # Test again, we may have decided not to build it any more

      if test "$build_libtool_libs" = yes; then

        if test "$hardcode_into_libs" = yes; then

          # Hardcode the library paths

          hardcode_libdirs=

          dep_rpath=

          rpath="$finalize_rpath"

          test "$mode" != relink && rpath="$compile_rpath$rpath"

          for libdir in $rpath; do

            if test -n "$hardcode_libdir_flag_spec"; then

              if test -n "$hardcode_libdir_separator"; then

                if test -z "$hardcode_libdirs"; then

                  hardcode_libdirs="$libdir"

                else

                  # Just accumulate the unique libdirs.

                  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in

                  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)

;;

*)

                    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"

;;

                  esac

fi

              else

                eval flag=\"$hardcode_libdir_flag_spec\"

                dep_rpath="$dep_rpath $flag"

fi

            elif test -n "$runpath_var"; then

              case "$perm_rpath " in

              *" $libdir "*) ;;

              *) perm_rpath="$perm_rpath $libdir" ;;

              esac

fi

          done

          # Substitute the hardcoded libdirs into the rpath.

          if test -n "$hardcode_libdir_separator" &&

             test -n "$hardcode_libdirs"; then

            libdir="$hardcode_libdirs"

            if test -n "$hardcode_libdir_flag_spec_ld"; then

              eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"

            else

              eval dep_rpath=\"$hardcode_libdir_flag_spec\"

fi

fi

          if test -n "$runpath_var" && test -n "$perm_rpath"; then

            # We should set the runpath_var.

            rpath=

            for dir in $perm_rpath; do

              rpath="$rpath$dir:"

            done

            eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"

fi

          test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"

fi

        shlibpath="$finalize_shlibpath"

        test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"

        if test -n "$shlibpath"; then

          eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"

fi

        # Get the real and link names of the library.

        eval shared_ext=\"$shrext_cmds\"

        eval library_names=\"$library_names_spec\"

        set dummy $library_names

        shift

        realname="$1"

        shift

        if test -n "$soname_spec"; then

          eval soname=\"$soname_spec\"

        else

          soname="$realname"

fi

        if test -z "$dlname"; then

          dlname=$soname

fi

        lib="$output_objdir/$realname"

        linknames=

        for link

do

          linknames="$linknames $link"

        done

        # Use standard objects if they are pic

        test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`

        test "X$libobjs" = "X " && libobjs=

        delfiles=

        if test -n "$export_symbols" && test -n "$include_expsyms"; then

          $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"

          export_symbols="$output_objdir/$libname.uexp"

          delfiles="$delfiles $export_symbols"

fi

        orig_export_symbols=

        case $host_os in

        cygwin* | mingw* | cegcc*)

          if test -n "$export_symbols" && test -z "$export_symbols_regex"; then

            # exporting using user supplied symfile

            if test "x`$SED 1q $export_symbols`" != xEXPORTS; then

              # and it's NOT already a .def file. Must figure out

              # which of the given symbols are data symbols and tag

              # them as such. So, trigger use of export_symbols_cmds.

              # export_symbols gets reassigned inside the "prepare

              # the list of exported symbols" if statement, so the

              # include_expsyms logic still works.

              orig_export_symbols="$export_symbols"

              export_symbols=

              always_export_symbols=yes

fi

fi

;;

        esac

        # Prepare the list of exported symbols

        if test -z "$export_symbols"; then

          if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then

            func_verbose "generating symbol list for \`$libname.la'"

            export_symbols="$output_objdir/$libname.exp"

            $opt_dry_run || $RM $export_symbols

            cmds=$export_symbols_cmds

            save_ifs="$IFS"; IFS='~'

            for cmd in $cmds; do

              IFS="$save_ifs"

              eval cmd=\"$cmd\"

              func_len " $cmd"

              len=$func_len_result

              if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then

                func_show_eval "$cmd" 'exit $?'

                skipped_export=false

              else

                # The command line is too long to execute in one step.

                func_verbose "using reloadable object file for export list..."

                skipped_export=:

                # Break out early, otherwise skipped_export may be

                # set to false by a later but shorter cmd.

                break

fi

            done

            IFS="$save_ifs"

            if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then

              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'

              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'

fi

fi

fi

        if test -n "$export_symbols" && test -n "$include_expsyms"; then

          tmp_export_symbols="$export_symbols"

          test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"

          $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'

fi

        if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then

          # The given exports_symbols file has to be filtered, so filter it.

          func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"

          # FIXME: $output_objdir/$libname.filter potentially contains lots of

          # 's' commands which not all seds can handle. GNU sed should be fine

          # though. Also, the filter scales superlinearly with the number of

          # global variables. join(1) would be nice here, but unfortunately

          # isn't a blessed tool.

          $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter

          delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"

          export_symbols=$output_objdir/$libname.def

          $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols

fi

        tmp_deplibs=

        for test_deplib in $deplibs; do

          case " $convenience " in

          *" $test_deplib "*) ;;

*)

            tmp_deplibs="$tmp_deplibs $test_deplib"

;;

          esac

        done

        deplibs="$tmp_deplibs"

        if test -n "$convenience"; then

          if test -n "$whole_archive_flag_spec" &&

            test "$compiler_needs_object" = yes &&

            test -z "$libobjs"; then

            # extract the archives, so we have objects to list.

            # TODO: could optimize this to just extract one archive.

            whole_archive_flag_spec=

fi

          if test -n "$whole_archive_flag_spec"; then

            save_libobjs=$libobjs

            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"

            test "X$libobjs" = "X " && libobjs=

          else

            gentop="$output_objdir/${outputname}x"

            generated="$generated $gentop"

            func_extract_archives $gentop $convenience

            libobjs="$libobjs $func_extract_archives_result"

            test "X$libobjs" = "X " && libobjs=

fi

fi

        if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then

          eval flag=\"$thread_safe_flag_spec\"

          linker_flags="$linker_flags $flag"

fi

        # Make a backup of the uninstalled library when relinking

        if test "$mode" = relink; then

          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?

fi

        # Do each of the archive commands.

        if test "$module" = yes && test -n "$module_cmds" ; then

          if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then

            eval test_cmds=\"$module_expsym_cmds\"

            cmds=$module_expsym_cmds

          else

            eval test_cmds=\"$module_cmds\"

            cmds=$module_cmds

fi

        else

          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then

            eval test_cmds=\"$archive_expsym_cmds\"

            cmds=$archive_expsym_cmds

          else

            eval test_cmds=\"$archive_cmds\"

            cmds=$archive_cmds

fi

fi

        if test "X$skipped_export" != "X:" &&

           func_len " $test_cmds" &&

           len=$func_len_result &&

           test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then

        else

          # The command line is too long to link in one step, link piecewise

          # or, if using GNU ld and skipped_export is not :, use a linker

          # script.

          # Save the value of $output and $libobjs because we want to

          # use them later.  If we have whole_archive_flag_spec, we

          # want to use save_libobjs as it was before

          # whole_archive_flag_spec was expanded, because we can't

          # assume the linker understands whole_archive_flag_spec.

          # This may have to be revisited, in case too many

          # convenience libraries get linked in and end up exceeding

          # the spec.

          if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then

            save_libobjs=$libobjs

fi

          save_output=$output

          output_la=`$ECHO "X$output" | $Xsed -e "$basename"`

          # Clear the reloadable object creation command queue and

          # initialize k to one.

          test_cmds=

          concat_cmds=

          objlist=

          last_robj=

k=1

          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then

            output=${output_objdir}/${output_la}.lnkscript

            func_verbose "creating GNU ld script: $output"

            $ECHO 'INPUT (' > $output

            for obj in $save_libobjs

do

              $ECHO "$obj" >> $output

            done

            $ECHO ')' >> $output

            delfiles="$delfiles $output"

          elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then

            output=${output_objdir}/${output_la}.lnk

            func_verbose "creating linker input file list: $output"

            : > $output

            set x $save_libobjs

            shift

            firstobj=

            if test "$compiler_needs_object" = yes; then

              firstobj="$1 "

              shift

fi

            for obj

do

              $ECHO "$obj" >> $output

            done

            delfiles="$delfiles $output"

            output=$firstobj\"$file_list_spec$output\"

          else

            if test -n "$save_libobjs"; then

              func_verbose "creating reloadable object files..."

              output=$output_objdir/$output_la-${k}.$objext

              eval test_cmds=\"$reload_cmds\"

              func_len " $test_cmds"

              len0=$func_len_result

              len=$len0

              # Loop over the list of objects to be linked.

              for obj in $save_libobjs

do

                func_len " $obj"

                func_arith $len + $func_len_result

                len=$func_arith_result

                if test "X$objlist" = X ||

                   test "$len" -lt "$max_cmd_len"; then

                  func_append objlist " $obj"

                else

                  # The command $test_cmds is almost too long, add a

                  # command to the queue.

                  if test "$k" -eq 1 ; then

                    # The first file doesn't have a previous command to add.

                    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"

                  else

                    # All subsequent reloadable object files will link in

                    # the last one created.

                    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"

fi

                  last_robj=$output_objdir/$output_la-${k}.$objext

                  func_arith $k + 1

                  k=$func_arith_result

                  output=$output_objdir/$output_la-${k}.$objext

                  objlist=$obj

                  func_len " $last_robj"

                  func_arith $len0 + $func_len_result

                  len=$func_arith_result

fi

              done

              # Handle the remaining objects by creating one last

              # reloadable object file.  All subsequent reloadable object

              # files will link in the last one created.

              test -z "$concat_cmds" || concat_cmds=$concat_cmds~

              eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"

              if test -n "$last_robj"; then

                eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"

fi

              delfiles="$delfiles $output"

            else

              output=

fi

            if ${skipped_export-false}; then

              func_verbose "generating symbol list for \`$libname.la'"

              export_symbols="$output_objdir/$libname.exp"

              $opt_dry_run || $RM $export_symbols

              libobjs=$output

              # Append the command to create the export file.

              test -z "$concat_cmds" || concat_cmds=$concat_cmds~

              eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"

              if test -n "$last_robj"; then

                eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"

fi

fi

            test -n "$save_libobjs" &&

              func_verbose "creating a temporary reloadable object file: $output"

            # Loop through the commands generated above and execute them.

            save_ifs="$IFS"; IFS='~'

            for cmd in $concat_cmds; do

              IFS="$save_ifs"

              $opt_silent || {

                  func_quote_for_expand "$cmd"

                  eval "func_echo $func_quote_for_expand_result"

              $opt_dry_run || eval "$cmd" || {

                lt_exit=$?

                # Restore the uninstalled library and exit

                if test "$mode" = relink; then

                  ( cd "$output_objdir" && \

                    $RM "${realname}T" && \

                    $MV "${realname}U" "$realname" )

fi

                exit $lt_exit

            done

            IFS="$save_ifs"

            if test -n "$export_symbols_regex" && ${skipped_export-false}; then

              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'

              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'

fi

fi

          if ${skipped_export-false}; then

            if test -n "$export_symbols" && test -n "$include_expsyms"; then

              tmp_export_symbols="$export_symbols"

              test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"

              $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'

fi

            if test -n "$orig_export_symbols"; then

              # The given exports_symbols file has to be filtered, so filter it.

              func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"

              # FIXME: $output_objdir/$libname.filter potentially contains lots of

              # 's' commands which not all seds can handle. GNU sed should be fine

              # though. Also, the filter scales superlinearly with the number of

              # global variables. join(1) would be nice here, but unfortunately

              # isn't a blessed tool.

              $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter

              delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"

              export_symbols=$output_objdir/$libname.def

              $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols

fi

fi

          libobjs=$output

          # Restore the value of output.

          output=$save_output

          if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then

            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"

            test "X$libobjs" = "X " && libobjs=

fi

          # Expand the library linking commands again to reset the

          # value of $libobjs for piecewise linking.

          # Do each of the archive commands.

          if test "$module" = yes && test -n "$module_cmds" ; then

            if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then

              cmds=$module_expsym_cmds

            else

              cmds=$module_cmds

fi

          else

            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then

              cmds=$archive_expsym_cmds

            else

              cmds=$archive_cmds

fi

fi

fi

        if test -n "$delfiles"; then

          # Append the command to remove temporary files to $cmds.

          eval cmds=\"\$cmds~\$RM $delfiles\"

fi

        # Add any objects from preloaded convenience libraries

        if test -n "$dlprefiles"; then

          gentop="$output_objdir/${outputname}x"

          generated="$generated $gentop"

          func_extract_archives $gentop $dlprefiles

          libobjs="$libobjs $func_extract_archives_result"

          test "X$libobjs" = "X " && libobjs=

fi

        save_ifs="$IFS"; IFS='~'

        for cmd in $cmds; do

          IFS="$save_ifs"

          eval cmd=\"$cmd\"

          $opt_silent || {

            func_quote_for_expand "$cmd"

            eval "func_echo $func_quote_for_expand_result"

          $opt_dry_run || eval "$cmd" || {

            lt_exit=$?

            # Restore the uninstalled library and exit

            if test "$mode" = relink; then

              ( cd "$output_objdir" && \

                $RM "${realname}T" && \

                $MV "${realname}U" "$realname" )

fi

            exit $lt_exit

        done

        IFS="$save_ifs"

        # Restore the uninstalled library and exit

        if test "$mode" = relink; then

          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?

          if test -n "$convenience"; then

            if test -z "$whole_archive_flag_spec"; then

              func_show_eval '${RM}r "$gentop"'

fi

fi

          exit $EXIT_SUCCESS

fi

        # Create links to the real library.

        for linkname in $linknames; do

          if test "$realname" != "$linkname"; then

            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'

fi

        done

        # If -module or -export-dynamic was specified, set the dlname.

        if test "$module" = yes || test "$export_dynamic" = yes; then

          # On all known operating systems, these are identical.

          dlname="$soname"

fi

fi

;;

    obj)

      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then

        func_warning "\`-dlopen' is ignored for objects"

fi

      case " $deplibs" in

      *\ -l* | *\ -L*)

        func_warning "\`-l' and \`-L' are ignored for objects" ;;

      esac

      test -n "$rpath" && \

        func_warning "\`-rpath' is ignored for objects"

      test -n "$xrpath" && \

        func_warning "\`-R' is ignored for objects"

      test -n "$vinfo" && \

        func_warning "\`-version-info' is ignored for objects"

      test -n "$release" && \

        func_warning "\`-release' is ignored for objects"

      case $output in

      *.lo)

        test -n "$objs$old_deplibs" && \

          func_fatal_error "cannot build library object \`$output' from non-libtool objects"

        libobj=$output

        func_lo2o "$libobj"

        obj=$func_lo2o_result

;;

*)

        libobj=

        obj="$output"

;;

      esac

      # Delete the old objects.

      $opt_dry_run || $RM $obj $libobj

      # Objects from convenience libraries.  This assumes

      # single-version convenience libraries.  Whenever we create

      # different ones for PIC/non-PIC, this we'll have to duplicate

      # the extraction.

      reload_conv_objs=

      gentop=

      # reload_cmds runs $LD directly, so let us get rid of

      # -Wl from whole_archive_flag_spec and hope we can get by with

      # turning comma into space..

wl=

      if test -n "$convenience"; then

        if test -n "$whole_archive_flag_spec"; then

          eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"

          reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`

        else

          gentop="$output_objdir/${obj}x"

          generated="$generated $gentop"

          func_extract_archives $gentop $convenience

          reload_conv_objs="$reload_objs $func_extract_archives_result"

fi

fi

      # Create the old-style object.

      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test

      output="$obj"

      func_execute_cmds "$reload_cmds" 'exit $?'

      # Exit if we aren't doing a library object file.

      if test -z "$libobj"; then

        if test -n "$gentop"; then

          func_show_eval '${RM}r "$gentop"'

fi

        exit $EXIT_SUCCESS

fi

      if test "$build_libtool_libs" != yes; then

        if test -n "$gentop"; then

          func_show_eval '${RM}r "$gentop"'

fi

        # Create an invalid libtool object if no PIC, so that we don't

        # accidentally link it into a program.

        # $show "echo timestamp > $libobj"

        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?

        exit $EXIT_SUCCESS

fi

      if test -n "$pic_flag" || test "$pic_mode" != default; then

        # Only do commands if we really have different PIC objects.

        reload_objs="$libobjs $reload_conv_objs"

        output="$libobj"

        func_execute_cmds "$reload_cmds" 'exit $?'

fi

      if test -n "$gentop"; then

        func_show_eval '${RM}r "$gentop"'

fi

      exit $EXIT_SUCCESS

;;

    prog)

      case $host in

        *cygwin*) func_stripname '' '.exe' "$output"

                  output=$func_stripname_result.exe;;

      esac

      test -n "$vinfo" && \

        func_warning "\`-version-info' is ignored for programs"

      test -n "$release" && \

        func_warning "\`-release' is ignored for programs"

      test "$preload" = yes \

        && test "$dlopen_support" = unknown \

        && test "$dlopen_self" = unknown \

        && test "$dlopen_self_static" = unknown && \

          func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."

      case $host in

      *-*-rhapsody* | *-*-darwin1.[012])

        # On Rhapsody replace the C library is the System framework

        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`

        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`

;;

      esac

      case $host in

      *-*-darwin*)

        # Don't allow lazy linking, it breaks C++ global constructors

        # But is supposedly fixed on 10.4 or later (yay!).

        if test "$tagname" = CXX ; then

          case ${MACOSX_DEPLOYMENT_TARGET-10.0} in

            10.[0123])

              compile_command="$compile_command ${wl}-bind_at_load"

              finalize_command="$finalize_command ${wl}-bind_at_load"

;;

          esac

fi

        # Time to change all our "foo.ltframework" stuff back to "-framework foo"

        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`

        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`

;;

      esac

      # move library search paths that coincide with paths to not yet

      # installed libraries to the beginning of the library search list

      new_libs=

      for path in $notinst_path; do

        case " $new_libs " in

        *" -L$path/$objdir "*) ;;

*)

          case " $compile_deplibs " in

          *" -L$path/$objdir "*)

            new_libs="$new_libs -L$path/$objdir" ;;

          esac

;;

        esac

      done

      for deplib in $compile_deplibs; do

        case $deplib in

        -L*)

          case " $new_libs " in

          *" $deplib "*) ;;

          *) new_libs="$new_libs $deplib" ;;

          esac

;;

        *) new_libs="$new_libs $deplib" ;;

        esac

      done

      compile_deplibs="$new_libs"

      compile_command="$compile_command $compile_deplibs"

      finalize_command="$finalize_command $finalize_deplibs"

      if test -n "$rpath$xrpath"; then

        # If the user specified any rpath flags, then add them.

        for libdir in $rpath $xrpath; do

          # This is the magic to use -rpath.

          case "$finalize_rpath " in

          *" $libdir "*) ;;

          *) finalize_rpath="$finalize_rpath $libdir" ;;

          esac

        done

fi

      # Now hardcode the library paths

      rpath=

      hardcode_libdirs=

      for libdir in $compile_rpath $finalize_rpath; do

        if test -n "$hardcode_libdir_flag_spec"; then

          if test -n "$hardcode_libdir_separator"; then

            if test -z "$hardcode_libdirs"; then

              hardcode_libdirs="$libdir"

            else

              # Just accumulate the unique libdirs.

              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in

              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)

;;

*)

                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"

;;

              esac

fi

          else

            eval flag=\"$hardcode_libdir_flag_spec\"

            rpath="$rpath $flag"

fi

        elif test -n "$runpath_var"; then

          case "$perm_rpath " in

          *" $libdir "*) ;;

          *) perm_rpath="$perm_rpath $libdir" ;;

          esac

fi

        case $host in

        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)

          testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`

          case :$dllsearchpath: in

          *":$libdir:"*) ;;

          ::) dllsearchpath=$libdir;;

          *) dllsearchpath="$dllsearchpath:$libdir";;

          esac

          case :$dllsearchpath: in

          *":$testbindir:"*) ;;

          ::) dllsearchpath=$testbindir;;

          *) dllsearchpath="$dllsearchpath:$testbindir";;

          esac

;;

        esac

      done

      # Substitute the hardcoded libdirs into the rpath.

      if test -n "$hardcode_libdir_separator" &&

         test -n "$hardcode_libdirs"; then

        libdir="$hardcode_libdirs"

        eval rpath=\" $hardcode_libdir_flag_spec\"

fi

      compile_rpath="$rpath"

      rpath=

      hardcode_libdirs=

      for libdir in $finalize_rpath; do

        if test -n "$hardcode_libdir_flag_spec"; then

          if test -n "$hardcode_libdir_separator"; then

            if test -z "$hardcode_libdirs"; then

              hardcode_libdirs="$libdir"

            else

              # Just accumulate the unique libdirs.

              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in

              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)

;;

*)

                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"

;;

              esac

fi

          else

            eval flag=\"$hardcode_libdir_flag_spec\"

            rpath="$rpath $flag"

fi

        elif test -n "$runpath_var"; then

          case "$finalize_perm_rpath " in

          *" $libdir "*) ;;

          *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;

          esac

fi

      done

      # Substitute the hardcoded libdirs into the rpath.

      if test -n "$hardcode_libdir_separator" &&

         test -n "$hardcode_libdirs"; then

        libdir="$hardcode_libdirs"

        eval rpath=\" $hardcode_libdir_flag_spec\"

fi

      finalize_rpath="$rpath"

      if test -n "$libobjs" && test "$build_old_libs" = yes; then

        # Transform all the library objects into standard objects.

        compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`

        finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`

fi

      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"

      # template prelinking step

      if test -n "$prelink_cmds"; then

        func_execute_cmds "$prelink_cmds" 'exit $?'

fi

      wrappers_required=yes

      case $host in

      *cygwin* | *mingw* )

        if test "$build_libtool_libs" != yes; then

          wrappers_required=no

fi

;;

      *cegcc)

        # Disable wrappers for cegcc, we are cross compiling anyway.

        wrappers_required=no

;;

*)

        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then

          wrappers_required=no

fi

;;

      esac

      if test "$wrappers_required" = no; then

        # Replace the output file specification.

        compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`

        link_command="$compile_command$compile_rpath"

        # We have no uninstalled library dependencies, so finalize right now.

        exit_status=0

        func_show_eval "$link_command" 'exit_status=$?'

        # Delete the generated files.

        if test -f "$output_objdir/${outputname}S.${objext}"; then

          func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'

fi

        exit $exit_status

fi

      if test -n "$compile_shlibpath$finalize_shlibpath"; then

        compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"

fi

      if test -n "$finalize_shlibpath"; then

        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"

fi

      compile_var=

      finalize_var=

      if test -n "$runpath_var"; then

        if test -n "$perm_rpath"; then

          # We should set the runpath_var.

          rpath=

          for dir in $perm_rpath; do

            rpath="$rpath$dir:"

          done

          compile_var="$runpath_var=\"$rpath\$$runpath_var\" "

fi

        if test -n "$finalize_perm_rpath"; then

          # We should set the runpath_var.

          rpath=

          for dir in $finalize_perm_rpath; do

            rpath="$rpath$dir:"

          done

          finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "

fi

fi

      if test "$no_install" = yes; then

        # We don't need to create a wrapper script.

        link_command="$compile_var$compile_command$compile_rpath"

        # Replace the output file specification.

        link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`

        # Delete the old output file.

        $opt_dry_run || $RM $output

        # Link the executable and exit

        func_show_eval "$link_command" 'exit $?'

        exit $EXIT_SUCCESS

fi

      if test "$hardcode_action" = relink; then

        # Fast installation is not supported

        link_command="$compile_var$compile_command$compile_rpath"

        relink_command="$finalize_var$finalize_command$finalize_rpath"

        func_warning "this platform does not like uninstalled shared libraries"

        func_warning "\`$output' will be relinked during installation"

      else

        if test "$fast_install" != no; then

          link_command="$finalize_var$compile_command$finalize_rpath"

          if test "$fast_install" = yes; then

            relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`

          else

            # fast_install is set to needless

            relink_command=

fi

        else

          link_command="$compile_var$compile_command$compile_rpath"

          relink_command="$finalize_var$finalize_command$finalize_rpath"

fi

fi

      # Replace the output file specification.

      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`

      # Delete the old output files.

      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname

      func_show_eval "$link_command" 'exit $?'

      # Now create the wrapper script.

      func_verbose "creating $output"

      # Quote the relink command for shipping.

      if test -n "$relink_command"; then

        # Preserve any variables that may affect compiler behavior

        for var in $variables_saved_for_relink; do

          if eval test -z \"\${$var+set}\"; then

            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"

          elif eval var_value=\$$var; test -z "$var_value"; then

            relink_command="$var=; export $var; $relink_command"

          else

            func_quote_for_eval "$var_value"

            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"

fi

        done

        relink_command="(cd `pwd`; $relink_command)"

        relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`

fi

      # Quote $ECHO for shipping.

      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then

        case $progpath in

        [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;

        *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;

        esac

        qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`

      else

        qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`

fi

      # Only actually do things if not in dry run mode.

      $opt_dry_run || {

        # win32 will think the script is a binary if it has

        # a .exe suffix, so we strip it off here.

        case $output in

          *.exe) func_stripname '' '.exe' "$output"

                 output=$func_stripname_result ;;

        esac

        # test for cygwin because mv fails w/o .exe extensions

        case $host in

          *cygwin*)

            exeext=.exe

            func_stripname '' '.exe' "$outputname"

            outputname=$func_stripname_result ;;

          *) exeext= ;;

        esac

        case $host in

          *cygwin* | *mingw* )

            func_dirname_and_basename "$output" "" "."

            output_name=$func_basename_result

            output_path=$func_dirname_result

            cwrappersource="$output_path/$objdir/lt-$output_name.c"

            cwrapper="$output_path/$output_name.exe"

            $RM $cwrappersource $cwrapper

            trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15

            func_emit_cwrapperexe_src > $cwrappersource

            # The wrapper executable is built using the $host compiler,

            # because it contains $host paths and files. If cross-

            # compiling, it, like the target executable, must be

            # executed on the $host or under an emulation environment.

            $opt_dry_run || {

              $LTCC $LTCFLAGS -o $cwrapper $cwrappersource

              $STRIP $cwrapper

            # Now, create the wrapper script for func_source use:

            func_ltwrapper_scriptname $cwrapper

            $RM $func_ltwrapper_scriptname_result

            trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15

            $opt_dry_run || {

              # note: this script will not be executed, so do not chmod.

              if test "x$build" = "x$host" ; then

                $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result

              else

                func_emit_wrapper no > $func_ltwrapper_scriptname_result

fi

;;

* )

            $RM $output

            trap "$RM $output; exit $EXIT_FAILURE" 1 2 15

            func_emit_wrapper no > $output

            chmod +x $output

;;

        esac

      exit $EXIT_SUCCESS

;;

    esac

    # See if we need to build an old-fashioned archive.

    for oldlib in $oldlibs; do

      if test "$build_libtool_libs" = convenience; then

        oldobjs="$libobjs_save $symfileobj"

        addlibs="$convenience"

        build_libtool_libs=no

      else

        if test "$build_libtool_libs" = module; then

          oldobjs="$libobjs_save"

          build_libtool_libs=no

        else

          oldobjs="$old_deplibs $non_pic_objects"

          if test "$preload" = yes && test -f "$symfileobj"; then

            oldobjs="$oldobjs $symfileobj"

fi

fi

        addlibs="$old_convenience"

fi

      if test -n "$addlibs"; then

        gentop="$output_objdir/${outputname}x"

        generated="$generated $gentop"

        func_extract_archives $gentop $addlibs

        oldobjs="$oldobjs $func_extract_archives_result"

fi

      # Do each command in the archive commands.

      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then

        cmds=$old_archive_from_new_cmds

      else

        # Add any objects from preloaded convenience libraries

        if test -n "$dlprefiles"; then

          gentop="$output_objdir/${outputname}x"

          generated="$generated $gentop"

          func_extract_archives $gentop $dlprefiles

          oldobjs="$oldobjs $func_extract_archives_result"

fi

        # POSIX demands no paths to be encoded in archives.  We have

        # to avoid creating archives with duplicate basenames if we

        # might have to extract them afterwards, e.g., when creating a

        # static archive out of a convenience library, or when linking

        # the entirety of a libtool archive into another (currently

        # not supported by libtool).

        if (for obj in $oldobjs

do

              func_basename "$obj"

              $ECHO "$func_basename_result"

            done | sort | sort -uc >/dev/null 2>&1); then

        else

          $ECHO "copying selected object files to avoid basename conflicts..."

          gentop="$output_objdir/${outputname}x"

          generated="$generated $gentop"

          func_mkdir_p "$gentop"

          save_oldobjs=$oldobjs

          oldobjs=

          counter=1

          for obj in $save_oldobjs

do

            func_basename "$obj"

            objbase="$func_basename_result"

            case " $oldobjs " in

            " ") oldobjs=$obj ;;

            *[\ /]"$objbase "*)

              while :; do

                # Make sure we don't pick an alternate name that also

                # overlaps.

                newobj=lt$counter-$objbase

                func_arith $counter + 1

                counter=$func_arith_result

                case " $oldobjs " in

                *[\ /]"$newobj "*) ;;

                *) if test ! -f "$gentop/$newobj"; then break; fi ;;

                esac

              done

              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"

              oldobjs="$oldobjs $gentop/$newobj"

;;

            *) oldobjs="$oldobjs $obj" ;;

            esac

          done

fi

        eval cmds=\"$old_archive_cmds\"

        func_len " $cmds"

        len=$func_len_result

        if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then

          cmds=$old_archive_cmds

        else

          # the command line is too long to link in one step, link in parts

          func_verbose "using piecewise archive linking..."

          save_RANLIB=$RANLIB

          RANLIB=:

          objlist=

          concat_cmds=

          save_oldobjs=$oldobjs

          oldobjs=

          # Is there a better way of finding the last object in the list?

          for obj in $save_oldobjs

do

            last_oldobj=$obj

          done

          eval test_cmds=\"$old_archive_cmds\"

          func_len " $test_cmds"

          len0=$func_len_result

          len=$len0

          for obj in $save_oldobjs

do

            func_len " $obj"

            func_arith $len + $func_len_result

            len=$func_arith_result

            func_append objlist " $obj"

            if test "$len" -lt "$max_cmd_len"; then

            else

              # the above command should be used before it gets too long

              oldobjs=$objlist

              if test "$obj" = "$last_oldobj" ; then

                RANLIB=$save_RANLIB

fi

              test -z "$concat_cmds" || concat_cmds=$concat_cmds~

              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"

              objlist=

              len=$len0

fi

          done

          RANLIB=$save_RANLIB

          oldobjs=$objlist

          if test "X$oldobjs" = "X" ; then

            eval cmds=\"\$concat_cmds\"

          else

            eval cmds=\"\$concat_cmds~\$old_archive_cmds\"

fi

fi

fi

      func_execute_cmds "$cmds" 'exit $?'

    done

    test -n "$generated" && \

      func_show_eval "${RM}r$generated"

    # Now create the libtool archive.

    case $output in

    *.la)

      old_library=

      test "$build_old_libs" = yes && old_library="$libname.$libext"

      func_verbose "creating $output"

      # Preserve any variables that may affect compiler behavior

      for var in $variables_saved_for_relink; do

        if eval test -z \"\${$var+set}\"; then

          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"

        elif eval var_value=\$$var; test -z "$var_value"; then

          relink_command="$var=; export $var; $relink_command"

        else

          func_quote_for_eval "$var_value"

          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"

fi

      done

      # Quote the link command for shipping.

      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"

      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`

      if test "$hardcode_automatic" = yes ; then

        relink_command=

fi

      # Only create the output if not a dry run.

      $opt_dry_run || {

        for installed in no yes; do

          if test "$installed" = yes; then

            if test -z "$install_libdir"; then

              break

fi

            output="$output_objdir/$outputname"i

            # Replace all uninstalled libtool libraries with the installed ones

            newdependency_libs=

            for deplib in $dependency_libs; do

              case $deplib in

              *.la)

                func_basename "$deplib"

                name="$func_basename_result"

                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`

                test -z "$libdir" && \

                  func_fatal_error "\`$deplib' is not a valid libtool archive"

                newdependency_libs="$newdependency_libs $libdir/$name"

;;

              *) newdependency_libs="$newdependency_libs $deplib" ;;

              esac

            done

            dependency_libs="$newdependency_libs"

            newdlfiles=

            for lib in $dlfiles; do

              case $lib in

              *.la)

                func_basename "$lib"

                name="$func_basename_result"

                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`

                test -z "$libdir" && \

                  func_fatal_error "\`$lib' is not a valid libtool archive"

                newdlfiles="$newdlfiles $libdir/$name"

;;

              *) newdlfiles="$newdlfiles $lib" ;;

              esac

            done

            dlfiles="$newdlfiles"

            newdlprefiles=

            for lib in $dlprefiles; do

              case $lib in

              *.la)

                # Only pass preopened files to the pseudo-archive (for

                # eventual linking with the app. that links it) if we

                # didn't already link the preopened objects directly into

                # the library:

                func_basename "$lib"

                name="$func_basename_result"

                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`

                test -z "$libdir" && \

                  func_fatal_error "\`$lib' is not a valid libtool archive"

                newdlprefiles="$newdlprefiles $libdir/$name"

;;

              esac

            done

            dlprefiles="$newdlprefiles"

          else

            newdlfiles=

            for lib in $dlfiles; do

              case $lib in

                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;

                *) abs=`pwd`"/$lib" ;;

              esac

              newdlfiles="$newdlfiles $abs"

            done

            dlfiles="$newdlfiles"

            newdlprefiles=

            for lib in $dlprefiles; do

              case $lib in

                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;

                *) abs=`pwd`"/$lib" ;;

              esac

              newdlprefiles="$newdlprefiles $abs"

            done

            dlprefiles="$newdlprefiles"

fi

          $RM $output

          # place dlname in correct position for cygwin

          tdlname=$dlname

          case $host,$output,$installed,$module,$dlname in

            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;

          esac

          $ECHO > $output "\

# $outputname - a libtool library file

# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION

# Please DO NOT delete this file!

# It is necessary for linking the library.

# The name that we can dlopen(3).

dlname='$tdlname'

# Names of this library.

library_names='$library_names'

# The name of the static archive.

old_library='$old_library'

# Linker flags that can not go in dependency_libs.

inherited_linker_flags='$new_inherited_linker_flags'

# Libraries that this one depends upon.

dependency_libs='$dependency_libs'

# Names of additional weak libraries provided by this library

weak_library_names='$weak_libs'

# Version information for $libname.

current=$current

age=$age

revision=$revision

# Is this an already installed library?

installed=$installed

# Should we warn about portability when linking against -modules?

shouldnotlink=$module

# Files to dlopen/dlpreopen

dlopen='$dlfiles'

dlpreopen='$dlprefiles'

# Directory that this library needs to be installed in:

libdir='$install_libdir'"

          if test "$installed" = no && test "$need_relink" = yes; then

            $ECHO >> $output "\

relink_command=\"$relink_command\""

fi

        done

      # Do a symbolic link so that the libtool archive can be found in

      # LD_LIBRARY_PATH before the program is installed.

      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'

;;

    esac

    exit $EXIT_SUCCESS

{ test "$mode" = link || test "$mode" = relink; } &&

    func_mode_link ${1+"$@"}

# func_mode_uninstall arg...

func_mode_uninstall ()

    $opt_debug

    RM="$nonopt"

    files=

    rmforce=

    exit_status=0

    # This variable tells wrapper scripts just to set variables rather

    # than running their programs.

    libtool_install_magic="$magic"

    for arg

do

      case $arg in

      -f) RM="$RM $arg"; rmforce=yes ;;

      -*) RM="$RM $arg" ;;

      *) files="$files $arg" ;;

      esac

    done

    test -z "$RM" && \

      func_fatal_help "you must specify an RM program"

    rmdirs=

    origobjdir="$objdir"

    for file in $files; do

      func_dirname "$file" "" "."

      dir="$func_dirname_result"

      if test "X$dir" = X.; then

        objdir="$origobjdir"

      else

        objdir="$dir/$origobjdir"

fi

      func_basename "$file"

      name="$func_basename_result"

      test "$mode" = uninstall && objdir="$dir"

      # Remember objdir for removal later, being careful to avoid duplicates

      if test "$mode" = clean; then

        case " $rmdirs " in

          *" $objdir "*) ;;

          *) rmdirs="$rmdirs $objdir" ;;

        esac

fi

      # Don't error if the file doesn't exist and rm -f was used.

      if { test -L "$file"; } >/dev/null 2>&1 ||

         { test -h "$file"; } >/dev/null 2>&1 ||

         test -f "$file"; then

      elif test -d "$file"; then

        exit_status=1

        continue

      elif test "$rmforce" = yes; then

        continue

fi

      rmfiles="$file"

      case $name in

      *.la)

        # Possibly a libtool archive, so verify it.

        if func_lalib_p "$file"; then

          func_source $dir/$name

          # Delete the libtool libraries and symlinks.

          for n in $library_names; do

            rmfiles="$rmfiles $objdir/$n"

          done

          test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"

          case "$mode" in

          clean)

            case "  $library_names " in

            # "  " in the beginning catches empty $dlname

            *" $dlname "*) ;;

            *) rmfiles="$rmfiles $objdir/$dlname" ;;

            esac

            test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"

;;

          uninstall)

            if test -n "$library_names"; then

              # Do each command in the postuninstall commands.

              func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'

fi

            if test -n "$old_library"; then

              # Do each command in the old_postuninstall commands.

              func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'

fi

            # FIXME: should reinstall the best remaining shared library.

;;

          esac

fi

;;

      *.lo)

        # Possibly a libtool object, so verify it.

        if func_lalib_p "$file"; then

          # Read the .lo file

          func_source $dir/$name

          # Add PIC object to the list of files to remove.

          if test -n "$pic_object" &&

             test "$pic_object" != none; then

            rmfiles="$rmfiles $dir/$pic_object"

fi

          # Add non-PIC object to the list of files to remove.

          if test -n "$non_pic_object" &&

             test "$non_pic_object" != none; then

            rmfiles="$rmfiles $dir/$non_pic_object"

fi

fi

;;

*)

        if test "$mode" = clean ; then

          noexename=$name

          case $file in

          *.exe)

            func_stripname '' '.exe' "$file"

            file=$func_stripname_result

            func_stripname '' '.exe' "$name"

            noexename=$func_stripname_result

            # $file with .exe has already been added to rmfiles,

            # add $file without .exe

            rmfiles="$rmfiles $file"

;;

          esac

          # Do a test to see if this is a libtool program.

          if func_ltwrapper_p "$file"; then

            if func_ltwrapper_executable_p "$file"; then

              func_ltwrapper_scriptname "$file"

              relink_command=

              func_source $func_ltwrapper_scriptname_result

              rmfiles="$rmfiles $func_ltwrapper_scriptname_result"

            else

              relink_command=

              func_source $dir/$noexename

fi

            # note $name still contains .exe if it was in $file originally

            # as does the version of $file that was added into $rmfiles

            rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"

            if test "$fast_install" = yes && test -n "$relink_command"; then

              rmfiles="$rmfiles $objdir/lt-$name"

fi

            if test "X$noexename" != "X$name" ; then

              rmfiles="$rmfiles $objdir/lt-${noexename}.c"

fi

fi

fi

;;

      esac

      func_show_eval "$RM $rmfiles" 'exit_status=1'

    done

    objdir="$origobjdir"

    # Try to remove the ${objdir}s in the directories where we deleted files

    for dir in $rmdirs; do

      if test -d "$dir"; then

        func_show_eval "rmdir $dir >/dev/null 2>&1"

fi

    done

    exit $exit_status

{ test "$mode" = uninstall || test "$mode" = clean; } &&

    func_mode_uninstall ${1+"$@"}

test -z "$mode" && {

  help="$generic_help"

  func_fatal_help "you must specify a MODE"

test -z "$exec_cmd" && \

  func_fatal_help "invalid operation mode \`$mode'"

if test -n "$exec_cmd"; then

  eval exec "$exec_cmd"

  exit $EXIT_FAILURE

fi

exit $exit_status

# The TAGs below are defined such that we never get into a situation

# in which we disable both kinds of libraries.  Given conflicting

# choices, we go for a static library, that is the most portable,

# since we can't tell whether shared libraries were disabled because

# the user asked for that or because the platform doesn't support

# them.  This is particularly important on AIX, because we don't

# support having both static and shared libraries enabled at the same

# time on that platform, so we default to a shared-only configuration.

# If a disable-shared tag is given, we'll fallback to a static-only

# configuration.  But we'll never go from static-only to shared-only.

# ### BEGIN LIBTOOL TAG CONFIG: disable-shared

build_libtool_libs=no

build_old_libs=yes

# ### END LIBTOOL TAG CONFIG: disable-shared

# ### BEGIN LIBTOOL TAG CONFIG: disable-static

build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`

# ### END LIBTOOL TAG CONFIG: disable-static

# Local Variables:

# mode:shell-script

# sh-indentation:2

# End:

# vi:sw=2

 No newline at end of file

 No newline at end of file

Browse

Tools

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.17.0/] [ltmain.sh] - Diff between revs 148 and 158