OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.17.0/] [ltmain.sh] - Diff between revs 148 and 158

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 148 Rev 158
Line 1... Line 1...
 
# Generated from ltmain.m4sh.
 
 
 
# ltmain.sh (GNU libtool) 2.2.6
 
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
 
 
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
 
# This is free software; see the source for copying conditions.  There is NO
 
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
 
 
# GNU Libtool is free software; you can redistribute it and/or modify
 
# it under the terms of the GNU General Public License as published by
 
# the Free Software Foundation; either version 2 of the License, or
 
# (at your option) any later version.
 
#
 
# As a special exception to the GNU General Public License,
 
# if you distribute this file as part of a program or library that
 
# is built using GNU Libtool, you may include this file under the
 
# same distribution terms that you use for the rest of that program.
 
#
 
# GNU Libtool is distributed in the hope that it will be useful, but
 
# WITHOUT ANY WARRANTY; without even the implied warranty of
 
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 
# General Public License for more details.
 
#
 
# You should have received a copy of the GNU General Public License
 
# along with GNU Libtool; see the file COPYING.  If not, a copy
 
# can be downloaded from http://www.gnu.org/licenses/gpl.html,
 
# or obtained by writing to the Free Software Foundation, Inc.,
 
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
 
 
# Usage: $progname [OPTION]... [MODE-ARG]...
 
#
 
# Provide generalized library-building support services.
 
#
 
#     --config             show all configuration variables
 
#     --debug              enable verbose shell tracing
 
# -n, --dry-run            display commands without modifying any files
 
#     --features           display basic configuration information and exit
 
#     --mode=MODE          use operation mode MODE
 
#     --preserve-dup-deps  don't remove duplicate dependency libraries
 
#     --quiet, --silent    don't print informational messages
 
#     --tag=TAG            use configuration variables from tag TAG
 
# -v, --verbose            print informational messages (default)
 
#     --version            print version information
 
# -h, --help               print short or long help message
 
#
 
# MODE must be one of the following:
 
#
 
#       clean              remove files from the build directory
 
#       compile            compile a source file into a libtool object
 
#       execute            automatically set library path, then run a program
 
#       finish             complete the installation of libtool libraries
 
#       install            install libraries or executables
 
#       link               create a library or an executable
 
#       uninstall          remove libraries from an installed directory
 
#
 
# MODE-ARGS vary depending on the MODE.
 
# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 
#
 
# When reporting a bug, please describe a test case to reproduce it and
 
# include the following information:
 
#
 
#       host-triplet:   $host
 
#       shell:          $SHELL
 
#       compiler:               $LTCC
 
#       compiler flags:         $LTCFLAGS
 
#       linker:         $LD (gnu? $with_gnu_ld)
 
#       $progname:              (GNU libtool) 2.2.6
 
#       automake:               $automake_version
 
#       autoconf:               $autoconf_version
 
#
 
# Report bugs to <bug-libtool@gnu.org>.
 
 
 
PROGRAM=ltmain.sh
 
PACKAGE=libtool
 
VERSION=2.2.6
 
TIMESTAMP=""
 
package_revision=1.3012
 
 
 
# Be Bourne compatible
 
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
 
  emulate sh
 
  NULLCMD=:
 
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
 
  # is contrary to our usage.  Disable this feature.
 
  alias -g '${1+"$@"}'='"$@"'
 
  setopt NO_GLOB_SUBST
 
else
 
  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
 
fi
 
BIN_SH=xpg4; export BIN_SH # for Tru64
 
DUALCASE=1; export DUALCASE # for MKS sh
 
 
 
# NLS nuisances: We save the old values to restore during execute mode.
 
# Only set LANG and LC_ALL to C if already set.
 
# These must not be set unconditionally because not all systems understand
 
# e.g. LANG=C (notably SCO).
 
lt_user_locale=
 
lt_safe_locale=
 
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 
do
 
  eval "if test \"\${$lt_var+set}\" = set; then
 
          save_$lt_var=\$$lt_var
 
          $lt_var=C
 
          export $lt_var
 
          lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
 
          lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
 
        fi"
 
done
 
 
 
$lt_unset CDPATH
 
 
 
 
 
 
 
 
 
 
 
: ${CP="cp -f"}
 
: ${ECHO="echo"}
 
: ${EGREP="/usr/bin/grep -E"}
 
: ${FGREP="/usr/bin/grep -F"}
 
: ${GREP="/usr/bin/grep"}
 
: ${LN_S="ln -s"}
 
: ${MAKE="make"}
 
: ${MKDIR="mkdir"}
 
: ${MV="mv -f"}
 
: ${RM="rm -f"}
 
: ${SED="/opt/local/bin/gsed"}
 
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
 
: ${Xsed="$SED -e 1s/^X//"}
 
 
 
# Global variables:
 
EXIT_SUCCESS=0
 
EXIT_FAILURE=1
 
EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
 
EXIT_SKIP=77      # $? = 77 is used to indicate a skipped test to automake.
 
 
 
exit_status=$EXIT_SUCCESS
 
 
 
# Make sure IFS has a sensible default
 
lt_nl='
 
'
 
IFS="   $lt_nl"
 
 
 
dirname="s,/[^/]*$,,"
 
basename="s,^.*/,,"
 
 
 
# func_dirname_and_basename file append nondir_replacement
 
# perform func_basename and func_dirname in a single function
 
# call:
 
#   dirname:  Compute the dirname of FILE.  If nonempty,
 
#             add APPEND to the result, otherwise set result
 
#             to NONDIR_REPLACEMENT.
 
#             value returned in "$func_dirname_result"
 
#   basename: Compute filename of FILE.
 
#             value retuned in "$func_basename_result"
 
# Implementation must be kept synchronized with func_dirname
 
# and func_basename. For efficiency, we do not delegate to
 
# those functions but instead duplicate the functionality here.
 
func_dirname_and_basename ()
 
{
 
  # Extract subdirectory from the argument.
 
  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
 
  if test "X$func_dirname_result" = "X${1}"; then
 
    func_dirname_result="${3}"
 
  else
 
    func_dirname_result="$func_dirname_result${2}"
 
  fi
 
  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 
}
 
 
 
# Generated shell functions inserted here.
 
 
 
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 
# is ksh but when the shell is invoked as "sh" and the current value of
 
# the _XPG environment variable is not equal to 1 (one), the special
 
# positional parameter $0, within a function call, is the name of the
 
# function.
 
progpath="$0"
 
 
 
# The name of this program:
 
# In the unlikely event $progname began with a '-', it would play havoc with
 
# func_echo (imagine progname=-n), so we prepend ./ in that case:
 
func_dirname_and_basename "$progpath"
 
progname=$func_basename_result
 
case $progname in
 
  -*) progname=./$progname ;;
 
esac
 
 
 
# Make sure we have an absolute path for reexecution:
 
case $progpath in
 
  [\\/]*|[A-Za-z]:\\*) ;;
 
  *[\\/]*)
 
     progdir=$func_dirname_result
 
     progdir=`cd "$progdir" && pwd`
 
     progpath="$progdir/$progname"
 
     ;;
 
  *)
 
     save_IFS="$IFS"
 
     IFS=:
 
     for progdir in $PATH; do
 
       IFS="$save_IFS"
 
       test -x "$progdir/$progname" && break
 
     done
 
     IFS="$save_IFS"
 
     test -n "$progdir" || progdir=`pwd`
 
     progpath="$progdir/$progname"
 
     ;;
 
esac
 
 
 
# Sed substitution that helps us do robust quoting.  It backslashifies
 
# metacharacters that are still active within double-quoted strings.
 
Xsed="${SED}"' -e 1s/^X//'
 
sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
 
 
 
# Same as above, but do not quote variable references.
 
double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
 
 
# Re-`\' parameter expansions in output of double_quote_subst that were
 
# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
 
# in input to double_quote_subst, that '$' was protected from expansion.
 
# Since each input `\' is now two `\'s, look for any number of runs of
 
# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
 
bs='\\'
 
bs2='\\\\'
 
bs4='\\\\\\\\'
 
dollar='\$'
 
sed_double_backslash="\
 
  s/$bs4/&\\
 
/g
 
  s/^$bs2$dollar/$bs&/
 
  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
 
  s/\n//g"
 
 
 
# Standard options:
 
opt_dry_run=false
 
opt_help=false
 
opt_quiet=false
 
opt_verbose=false
 
opt_warning=:
 
 
 
# func_echo arg...
 
# Echo program name prefixed message, along with the current mode
 
# name if it has been set yet.
 
func_echo ()
 
{
 
    $ECHO "$progname${mode+: }$mode: $*"
 
}
 
 
 
# func_verbose arg...
 
# Echo program name prefixed message in verbose mode only.
 
func_verbose ()
 
{
 
    $opt_verbose && func_echo ${1+"$@"}
 
 
 
    # A bug in bash halts the script if the last line of a function
 
    # fails when set -e is in force, so we need another command to
 
    # work around that:
 
    :
 
}
 
 
 
# func_error arg...
 
# Echo program name prefixed message to standard error.
 
func_error ()
 
{
 
    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
 
}
 
 
 
# func_warning arg...
 
# Echo program name prefixed warning message to standard error.
 
func_warning ()
 
{
 
    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
 
 
 
    # bash bug again:
 
    :
 
}
 
 
 
# func_fatal_error arg...
 
# Echo program name prefixed message to standard error, and exit.
 
func_fatal_error ()
 
{
 
    func_error ${1+"$@"}
 
    exit $EXIT_FAILURE
 
}
 
 
 
# func_fatal_help arg...
 
# Echo program name prefixed message to standard error, followed by
 
# a help hint, and exit.
 
func_fatal_help ()
 
{
 
    func_error ${1+"$@"}
 
    func_fatal_error "$help"
 
}
 
help="Try \`$progname --help' for more information."  ## default
 
 
 
 
 
# func_grep expression filename
 
# Check whether EXPRESSION matches any line of FILENAME, without output.
 
func_grep ()
 
{
 
    $GREP "$1" "$2" >/dev/null 2>&1
 
}
 
 
 
 
 
# func_mkdir_p directory-path
 
# Make sure the entire path to DIRECTORY-PATH is available.
 
func_mkdir_p ()
 
{
 
    my_directory_path="$1"
 
    my_dir_list=
 
 
 
    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
 
 
 
      # Protect directory names starting with `-'
 
      case $my_directory_path in
 
        -*) my_directory_path="./$my_directory_path" ;;
 
      esac
 
 
 
      # While some portion of DIR does not yet exist...
 
      while test ! -d "$my_directory_path"; do
 
        # ...make a list in topmost first order.  Use a colon delimited
 
        # list incase some portion of path contains whitespace.
 
        my_dir_list="$my_directory_path:$my_dir_list"
 
 
 
        # If the last portion added has no slash in it, the list is done
 
        case $my_directory_path in */*) ;; *) break ;; esac
 
 
 
        # ...otherwise throw away the child directory and loop
 
        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
 
      done
 
      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
 
 
 
      save_mkdir_p_IFS="$IFS"; IFS=':'
 
      for my_dir in $my_dir_list; do
 
        IFS="$save_mkdir_p_IFS"
 
        # mkdir can fail with a `File exist' error if two processes
 
        # try to create one of the directories concurrently.  Don't
 
        # stop in that case!
 
        $MKDIR "$my_dir" 2>/dev/null || :
 
      done
 
      IFS="$save_mkdir_p_IFS"
 
 
 
      # Bail out if we (or some other process) failed to create a directory.
 
      test -d "$my_directory_path" || \
 
        func_fatal_error "Failed to create \`$1'"
 
    fi
 
}
 
 
 
 
 
# func_mktempdir [string]
 
# Make a temporary directory that won't clash with other running
 
# libtool processes, and avoids race conditions if possible.  If
 
# given, STRING is the basename for that directory.
 
func_mktempdir ()
 
{
 
    my_template="${TMPDIR-/tmp}/${1-$progname}"
 
 
 
    if test "$opt_dry_run" = ":"; then
 
      # Return a directory name, but don't create it in dry-run mode
 
      my_tmpdir="${my_template}-$$"
 
    else
 
 
 
      # If mktemp works, use that first and foremost
 
      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 
 
 
      if test ! -d "$my_tmpdir"; then
 
        # Failing that, at least try and use $RANDOM to avoid a race
 
        my_tmpdir="${my_template}-${RANDOM-0}$$"
 
 
 
        save_mktempdir_umask=`umask`
 
        umask 0077
 
        $MKDIR "$my_tmpdir"
 
        umask $save_mktempdir_umask
 
      fi
 
 
 
      # If we're not in dry-run mode, bomb out on failure
 
      test -d "$my_tmpdir" || \
 
        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
 
    fi
 
 
 
    $ECHO "X$my_tmpdir" | $Xsed
 
}
 
 
 
 
 
# func_quote_for_eval arg
 
# Aesthetically quote ARG to be evaled later.
 
# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
 
# is double-quoted, suitable for a subsequent eval, whereas
 
# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
 
# which are still active within double quotes backslashified.
 
func_quote_for_eval ()
 
{
 
    case $1 in
 
      *[\\\`\"\$]*)
 
        func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
 
      *)
 
        func_quote_for_eval_unquoted_result="$1" ;;
 
    esac
 
 
 
    case $func_quote_for_eval_unquoted_result in
 
      # Double-quote args containing shell metacharacters to delay
 
      # word splitting, command substitution and and variable
 
      # expansion for a subsequent eval.
 
      # Many Bourne shells cannot handle close brackets correctly
 
      # in scan sets, so we specify it separately.
 
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
 
        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
 
        ;;
 
      *)
 
        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
 
    esac
 
}
 
 
 
 
 
# func_quote_for_expand arg
 
# Aesthetically quote ARG to be evaled later; same as above,
 
# but do not quote variable references.
 
func_quote_for_expand ()
 
{
 
    case $1 in
 
      *[\\\`\"]*)
 
        my_arg=`$ECHO "X$1" | $Xsed \
 
            -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
 
      *)
 
        my_arg="$1" ;;
 
    esac
 
 
 
    case $my_arg in
 
      # Double-quote args containing shell metacharacters to delay
 
      # word splitting and command substitution for a subsequent eval.
 
      # Many Bourne shells cannot handle close brackets correctly
 
      # in scan sets, so we specify it separately.
 
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
 
        my_arg="\"$my_arg\""
 
        ;;
 
    esac
 
 
 
    func_quote_for_expand_result="$my_arg"
 
}
 
 
 
 
 
# func_show_eval cmd [fail_exp]
 
# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 
# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 
# is given, then evaluate it.
 
func_show_eval ()
 
{
 
    my_cmd="$1"
 
    my_fail_exp="${2-:}"
 
 
 
    ${opt_silent-false} || {
 
      func_quote_for_expand "$my_cmd"
 
      eval "func_echo $func_quote_for_expand_result"
 
    }
 
 
 
    if ${opt_dry_run-false}; then :; else
 
      eval "$my_cmd"
 
      my_status=$?
 
      if test "$my_status" -eq 0; then :; else
 
        eval "(exit $my_status); $my_fail_exp"
 
      fi
 
    fi
 
}
 
 
 
 
 
# func_show_eval_locale cmd [fail_exp]
 
# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 
# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 
# is given, then evaluate it.  Use the saved locale for evaluation.
 
func_show_eval_locale ()
 
{
 
    my_cmd="$1"
 
    my_fail_exp="${2-:}"
 
 
 
    ${opt_silent-false} || {
 
      func_quote_for_expand "$my_cmd"
 
      eval "func_echo $func_quote_for_expand_result"
 
    }
 
 
 
    if ${opt_dry_run-false}; then :; else
 
      eval "$lt_user_locale
 
            $my_cmd"
 
      my_status=$?
 
      eval "$lt_safe_locale"
 
      if test "$my_status" -eq 0; then :; else
 
        eval "(exit $my_status); $my_fail_exp"
 
      fi
 
    fi
 
}
 
 
 
 
 
 
 
 
 
 
 
# func_version
 
# Echo version message to standard output and exit.
 
func_version ()
 
{
 
    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
 
        s/^# //
 
        s/^# *$//
 
        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
 
        p
 
     }' < "$progpath"
 
     exit $?
 
}
 
 
 
# func_usage
 
# Echo short help message to standard output and exit.
 
func_usage ()
 
{
 
    $SED -n '/^# Usage:/,/# -h/ {
 
        s/^# //
 
        s/^# *$//
 
        s/\$progname/'$progname'/
 
        p
 
    }' < "$progpath"
 
    $ECHO
 
    $ECHO "run \`$progname --help | more' for full usage"
 
    exit $?
 
}
 
 
 
# func_help
 
# Echo long help message to standard output and exit.
 
func_help ()
 
{
 
    $SED -n '/^# Usage:/,/# Report bugs to/ {
 
        s/^# //
 
        s/^# *$//
 
        s*\$progname*'$progname'*
 
        s*\$host*'"$host"'*
 
        s*\$SHELL*'"$SHELL"'*
 
        s*\$LTCC*'"$LTCC"'*
 
        s*\$LTCFLAGS*'"$LTCFLAGS"'*
 
        s*\$LD*'"$LD"'*
 
        s/\$with_gnu_ld/'"$with_gnu_ld"'/
 
        s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
 
        s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
 
        p
 
     }' < "$progpath"
 
    exit $?
 
}
 
 
 
# func_missing_arg argname
 
# Echo program name prefixed message to standard error and set global
 
# exit_cmd.
 
func_missing_arg ()
 
{
 
    func_error "missing argument for $1"
 
    exit_cmd=exit
 
}
 
 
 
exit_cmd=:
 
 
 
 
 
 
 
 
 
 
 
# Check that we have a working $ECHO.
 
if test "X$1" = X--no-reexec; then
 
  # Discard the --no-reexec flag, and continue.
 
  shift
 
elif test "X$1" = X--fallback-echo; then
 
  # Avoid inline document here, it may be left over
 
  :
 
elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
 
  # Yippee, $ECHO works!
 
  :
 
else
 
  # Restart under the correct shell, and then maybe $ECHO will work.
 
  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
 
fi
 
 
 
if test "X$1" = X--fallback-echo; then
 
  # used as fallback echo
 
  shift
 
  cat <<EOF
 
$*
 
EOF
 
  exit $EXIT_SUCCESS
 
fi
 
 
 
magic="%%%MAGIC variable%%%"
 
magic_exe="%%%MAGIC EXE variable%%%"
 
 
 
# Global variables.
 
# $mode is unset
 
nonopt=
 
execute_dlfiles=
 
preserve_args=
 
lo2o="s/\\.lo\$/.${objext}/"
 
o2lo="s/\\.${objext}\$/.lo/"
 
extracted_archives=
 
extracted_serial=0
 
 
 
opt_dry_run=false
 
opt_duplicate_deps=false
 
opt_silent=false
 
opt_debug=:
 
 
 
# If this variable is set in any of the actions, the command in it
 
# will be execed at the end.  This prevents here-documents from being
 
# left over by shells.
 
exec_cmd=
 
 
 
# func_fatal_configuration arg...
 
# Echo program name prefixed message to standard error, followed by
 
# a configuration failure hint, and exit.
 
func_fatal_configuration ()
 
{
 
    func_error ${1+"$@"}
 
    func_error "See the $PACKAGE documentation for more information."
 
    func_fatal_error "Fatal configuration error."
 
}
 
 
 
 
 
# func_config
 
# Display the configuration for all the tags in this script.
 
func_config ()
 
{
 
    re_begincf='^# ### BEGIN LIBTOOL'
 
    re_endcf='^# ### END LIBTOOL'
 
 
 
    # Default configuration.
 
    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
 
 
 
    # Now print the configurations for the tags.
 
    for tagname in $taglist; do
 
      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
 
    done
 
 
 
    exit $?
 
}
 
 
 
# func_features
 
# Display the features supported by this script.
 
func_features ()
 
{
 
    $ECHO "host: $host"
 
    if test "$build_libtool_libs" = yes; then
 
      $ECHO "enable shared libraries"
 
    else
 
      $ECHO "disable shared libraries"
 
    fi
 
    if test "$build_old_libs" = yes; then
 
      $ECHO "enable static libraries"
 
    else
 
      $ECHO "disable static libraries"
 
    fi
 
 
 
    exit $?
 
}
 
 
 
# func_enable_tag tagname
 
# Verify that TAGNAME is valid, and either flag an error and exit, or
 
# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
 
# variable here.
 
func_enable_tag ()
 
{
 
  # Global variable:
 
  tagname="$1"
 
 
 
  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
 
  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
 
  sed_extractcf="/$re_begincf/,/$re_endcf/p"
 
 
 
  # Validate tagname.
 
  case $tagname in
 
    *[!-_A-Za-z0-9,/]*)
 
      func_fatal_error "invalid tag name: $tagname"
 
      ;;
 
  esac
 
 
 
  # Don't test for the "default" C tag, as we know it's
 
  # there but not specially marked.
 
  case $tagname in
 
    CC) ;;
 
    *)
 
      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
 
        taglist="$taglist $tagname"
 
 
 
        # Evaluate the configuration.  Be careful to quote the path
 
        # and the sed script, to avoid splitting on whitespace, but
 
        # also don't use non-portable quotes within backquotes within
 
        # quotes we have to do it in 2 steps:
 
        extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
 
        eval "$extractedcf"
 
      else
 
        func_error "ignoring unknown tag $tagname"
 
      fi
 
      ;;
 
  esac
 
}
 
 
 
# Parse options once, thoroughly.  This comes as soon as possible in
 
# the script to make things like `libtool --version' happen quickly.
 
{
 
 
 
  # Shorthand for --mode=foo, only valid as the first argument
 
  case $1 in
 
  clean|clea|cle|cl)
 
    shift; set dummy --mode clean ${1+"$@"}; shift
 
    ;;
 
  compile|compil|compi|comp|com|co|c)
 
    shift; set dummy --mode compile ${1+"$@"}; shift
 
    ;;
 
  execute|execut|execu|exec|exe|ex|e)
 
    shift; set dummy --mode execute ${1+"$@"}; shift
 
    ;;
 
  finish|finis|fini|fin|fi|f)
 
    shift; set dummy --mode finish ${1+"$@"}; shift
 
    ;;
 
  install|instal|insta|inst|ins|in|i)
 
    shift; set dummy --mode install ${1+"$@"}; shift
 
    ;;
 
  link|lin|li|l)
 
    shift; set dummy --mode link ${1+"$@"}; shift
 
    ;;
 
  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
 
    shift; set dummy --mode uninstall ${1+"$@"}; shift
 
    ;;
 
  esac
 
 
 
  # Parse non-mode specific arguments:
 
  while test "$#" -gt 0; do
 
    opt="$1"
 
    shift
 
 
 
    case $opt in
 
      --config)         func_config                                     ;;
 
 
 
      --debug)          preserve_args="$preserve_args $opt"
 
                        func_echo "enabling shell trace mode"
 
                        opt_debug='set -x'
 
                        $opt_debug
 
                        ;;
 
 
 
      -dlopen)          test "$#" -eq 0 && func_missing_arg "$opt" && break
 
                        execute_dlfiles="$execute_dlfiles $1"
 
                        shift
 
                        ;;
 
 
 
      --dry-run | -n)   opt_dry_run=:                                   ;;
 
      --features)       func_features                                   ;;
 
      --finish)         mode="finish"                                   ;;
 
 
 
      --mode)           test "$#" -eq 0 && func_missing_arg "$opt" && break
 
                        case $1 in
 
                          # Valid mode arguments:
 
                          clean)        ;;
 
                          compile)      ;;
 
                          execute)      ;;
 
                          finish)       ;;
 
                          install)      ;;
 
                          link)         ;;
 
                          relink)       ;;
 
                          uninstall)    ;;
 
 
 
                          # Catch anything else as an error
 
                          *) func_error "invalid argument for $opt"
 
                             exit_cmd=exit
 
                             break
 
                             ;;
 
                        esac
 
 
 
                        mode="$1"
 
                        shift
 
                        ;;
 
 
 
      --preserve-dup-deps)
 
                        opt_duplicate_deps=:                            ;;
 
 
 
      --quiet|--silent) preserve_args="$preserve_args $opt"
 
                        opt_silent=:
 
                        ;;
 
 
 
      --verbose| -v)    preserve_args="$preserve_args $opt"
 
                        opt_silent=false
 
                        ;;
 
 
 
      --tag)            test "$#" -eq 0 && func_missing_arg "$opt" && break
 
                        preserve_args="$preserve_args $opt $1"
 
                        func_enable_tag "$1"    # tagname is set here
 
                        shift
 
                        ;;
 
 
 
      # Separate optargs to long options:
 
      -dlopen=*|--mode=*|--tag=*)
 
                        func_opt_split "$opt"
 
                        set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
 
                        shift
 
                        ;;
 
 
 
      -\?|-h)           func_usage                                      ;;
 
      --help)           opt_help=:                                      ;;
 
      --version)        func_version                                    ;;
 
 
 
      -*)               func_fatal_help "unrecognized option \`$opt'"   ;;
 
 
 
      *)                nonopt="$opt"
 
                        break
 
                        ;;
 
    esac
 
  done
 
 
 
 
 
  case $host in
 
    *cygwin* | *mingw* | *pw32* | *cegcc*)
 
      # don't eliminate duplications in $postdeps and $predeps
 
      opt_duplicate_compiler_generated_deps=:
 
      ;;
 
    *)
 
      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
 
      ;;
 
  esac
 
 
 
  # Having warned about all mis-specified options, bail out if
 
  # anything was wrong.
 
  $exit_cmd $EXIT_FAILURE
 
}
 
 
 
# func_check_version_match
 
# Ensure that we are using m4 macros, and libtool script from the same
 
# release of libtool.
 
func_check_version_match ()
 
{
 
  if test "$package_revision" != "$macro_revision"; then
 
    if test "$VERSION" != "$macro_version"; then
 
      if test -z "$macro_version"; then
 
        cat >&2 <<_LT_EOF
 
$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 
$progname: definition of this LT_INIT comes from an older release.
 
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 
$progname: and run autoconf again.
 
_LT_EOF
 
      else
 
        cat >&2 <<_LT_EOF
 
$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
 
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 
$progname: and run autoconf again.
 
_LT_EOF
 
      fi
 
    else
 
      cat >&2 <<_LT_EOF
 
$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
 
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
 
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
 
$progname: of $PACKAGE $VERSION and run autoconf again.
 
_LT_EOF
 
    fi
 
 
 
    exit $EXIT_MISMATCH
 
  fi
 
}
 
 
 
 
 
## ----------- ##
 
##    Main.    ##
 
## ----------- ##
 
 
 
$opt_help || {
 
  # Sanity checks first:
 
  func_check_version_match
 
 
 
  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
 
    func_fatal_configuration "not configured to build any kind of library"
 
  fi
 
 
 
  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
 
 
 
 
 
  # Darwin sucks
 
  eval std_shrext=\"$shrext_cmds\"
 
 
 
 
 
  # Only execute mode is allowed to have -dlopen flags.
 
  if test -n "$execute_dlfiles" && test "$mode" != execute; then
 
    func_error "unrecognized option \`-dlopen'"
 
    $ECHO "$help" 1>&2
 
    exit $EXIT_FAILURE
 
  fi
 
 
 
  # Change the help message to a mode-specific one.
 
  generic_help="$help"
 
  help="Try \`$progname --help --mode=$mode' for more information."
 
}
 
 
 
 
 
# func_lalib_p file
 
# True iff FILE is a libtool `.la' library or `.lo' object file.
 
# This function is only a basic sanity check; it will hardly flush out
 
# determined imposters.
 
func_lalib_p ()
 
{
 
    test -f "$1" &&
 
      $SED -e 4q "$1" 2>/dev/null \
 
        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
 
}
 
 
 
# func_lalib_unsafe_p file
 
# True iff FILE is a libtool `.la' library or `.lo' object file.
 
# This function implements the same check as func_lalib_p without
 
# resorting to external programs.  To this end, it redirects stdin and
 
# closes it afterwards, without saving the original file descriptor.
 
# As a safety measure, use it only where a negative result would be
 
# fatal anyway.  Works if `file' does not exist.
 
func_lalib_unsafe_p ()
 
{
 
    lalib_p=no
 
    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
 
        for lalib_p_l in 1 2 3 4
 
        do
 
            read lalib_p_line
 
            case "$lalib_p_line" in
 
                \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
 
            esac
 
        done
 
        exec 0<&5 5<&-
 
    fi
 
    test "$lalib_p" = yes
 
}
 
 
 
# func_ltwrapper_script_p file
 
# True iff FILE is a libtool wrapper script
 
# This function is only a basic sanity check; it will hardly flush out
 
# determined imposters.
 
func_ltwrapper_script_p ()
 
{
 
    func_lalib_p "$1"
 
}
 
 
 
# func_ltwrapper_executable_p file
 
# True iff FILE is a libtool wrapper executable
 
# This function is only a basic sanity check; it will hardly flush out
 
# determined imposters.
 
func_ltwrapper_executable_p ()
 
{
 
    func_ltwrapper_exec_suffix=
 
    case $1 in
 
    *.exe) ;;
 
    *) func_ltwrapper_exec_suffix=.exe ;;
 
    esac
 
    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
 
}
 
 
 
# func_ltwrapper_scriptname file
 
# Assumes file is an ltwrapper_executable
 
# uses $file to determine the appropriate filename for a
 
# temporary ltwrapper_script.
 
func_ltwrapper_scriptname ()
 
{
 
    func_ltwrapper_scriptname_result=""
 
    if func_ltwrapper_executable_p "$1"; then
 
        func_dirname_and_basename "$1" "" "."
 
        func_stripname '' '.exe' "$func_basename_result"
 
        func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
 
    fi
 
}
 
 
 
# func_ltwrapper_p file
 
# True iff FILE is a libtool wrapper script or wrapper executable
 
# This function is only a basic sanity check; it will hardly flush out
 
# determined imposters.
 
func_ltwrapper_p ()
 
{
 
    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
 
}
 
 
 
 
 
# func_execute_cmds commands fail_cmd
 
# Execute tilde-delimited COMMANDS.
 
# If FAIL_CMD is given, eval that upon failure.
 
# FAIL_CMD may read-access the current command in variable CMD!
 
func_execute_cmds ()
 
{
 
    $opt_debug
 
    save_ifs=$IFS; IFS='~'
 
    for cmd in $1; do
 
      IFS=$save_ifs
 
      eval cmd=\"$cmd\"
 
      func_show_eval "$cmd" "${2-:}"
 
    done
 
    IFS=$save_ifs
 
}
 
 
 
 
 
# func_source file
 
# Source FILE, adding directory component if necessary.
 
# Note that it is not necessary on cygwin/mingw to append a dot to
 
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
 
# behavior happens only for exec(3), not for open(2)!  Also, sourcing
 
# `FILE.' does not work on cygwin managed mounts.
 
func_source ()
 
{
 
    $opt_debug
 
    case $1 in
 
    */* | *\\*) . "$1" ;;
 
    *)          . "./$1" ;;
 
    esac
 
}
 
 
 
 
 
# func_infer_tag arg
 
# Infer tagged configuration to use if any are available and
 
# if one wasn't chosen via the "--tag" command line option.
 
# Only attempt this if the compiler in the base compile
 
# command doesn't match the default compiler.
 
# arg is usually of the form 'gcc ...'
 
func_infer_tag ()
 
{
 
    $opt_debug
 
    if test -n "$available_tags" && test -z "$tagname"; then
 
      CC_quoted=
 
      for arg in $CC; do
 
        func_quote_for_eval "$arg"
 
        CC_quoted="$CC_quoted $func_quote_for_eval_result"
 
      done
 
      case $@ in
 
      # Blanks in the command may have been stripped by the calling shell,
 
      # but not from the CC environment variable when configure was run.
 
      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
 
      # Blanks at the start of $base_compile will cause this to fail
 
      # if we don't check for them as well.
 
      *)
 
        for z in $available_tags; do
 
          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
 
            # Evaluate the configuration.
 
            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
 
            CC_quoted=
 
            for arg in $CC; do
 
              # Double-quote args containing other shell metacharacters.
 
              func_quote_for_eval "$arg"
 
              CC_quoted="$CC_quoted $func_quote_for_eval_result"
 
            done
 
            case "$@ " in
 
              " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
 
              # The compiler in the base compile command matches
 
              # the one in the tagged configuration.
 
              # Assume this is the tagged configuration we want.
 
              tagname=$z
 
              break
 
              ;;
 
            esac
 
          fi
 
        done
 
        # If $tagname still isn't set, then no tagged configuration
 
        # was found and let the user know that the "--tag" command
 
        # line option must be used.
 
        if test -z "$tagname"; then
 
          func_echo "unable to infer tagged configuration"
 
          func_fatal_error "specify a tag with \`--tag'"
 
#       else
 
#         func_verbose "using $tagname tagged configuration"
 
        fi
 
        ;;
 
      esac
 
    fi
 
}
 
 
 
 
 
 
 
# func_write_libtool_object output_name pic_name nonpic_name
 
# Create a libtool object file (analogous to a ".la" file),
 
# but don't create it if we're doing a dry run.
 
func_write_libtool_object ()
 
{
 
    write_libobj=${1}
 
    if test "$build_libtool_libs" = yes; then
 
      write_lobj=\'${2}\'
 
    else
 
      write_lobj=none
 
    fi
 
 
 
    if test "$build_old_libs" = yes; then
 
      write_oldobj=\'${3}\'
 
    else
 
      write_oldobj=none
 
    fi
 
 
 
    $opt_dry_run || {
 
      cat >${write_libobj}T <<EOF
 
# $write_libobj - a libtool object file
 
# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
#
 
# Please DO NOT delete this file!
 
# It is necessary for linking the library.
 
 
 
# Name of the PIC object.
 
pic_object=$write_lobj
 
 
 
# Name of the non-PIC object
 
non_pic_object=$write_oldobj
 
 
 
EOF
 
      $MV "${write_libobj}T" "${write_libobj}"
 
    }
 
}
 
 
 
# func_mode_compile arg...
 
func_mode_compile ()
 
{
 
    $opt_debug
 
    # Get the compilation command and the source file.
 
    base_compile=
 
    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
 
    suppress_opt=yes
 
    suppress_output=
 
    arg_mode=normal
 
    libobj=
 
    later=
 
    pie_flag=
 
 
 
    for arg
 
    do
 
      case $arg_mode in
 
      arg  )
 
        # do not "continue".  Instead, add this to base_compile
 
        lastarg="$arg"
 
        arg_mode=normal
 
        ;;
 
 
 
      target )
 
        libobj="$arg"
 
        arg_mode=normal
 
        continue
 
        ;;
 
 
 
      normal )
 
        # Accept any command-line options.
 
        case $arg in
 
        -o)
 
          test -n "$libobj" && \
 
            func_fatal_error "you cannot specify \`-o' more than once"
 
          arg_mode=target
 
          continue
 
          ;;
 
 
 
        -pie | -fpie | -fPIE)
 
          pie_flag="$pie_flag $arg"
 
          continue
 
          ;;
 
 
 
        -shared | -static | -prefer-pic | -prefer-non-pic)
 
          later="$later $arg"
 
          continue
 
          ;;
 
 
 
        -no-suppress)
 
          suppress_opt=no
 
          continue
 
          ;;
 
 
 
        -Xcompiler)
 
          arg_mode=arg  #  the next one goes into the "base_compile" arg list
 
          continue      #  The current "srcfile" will either be retained or
 
          ;;            #  replaced later.  I would guess that would be a bug.
 
 
 
        -Wc,*)
 
          func_stripname '-Wc,' '' "$arg"
 
          args=$func_stripname_result
 
          lastarg=
 
          save_ifs="$IFS"; IFS=','
 
          for arg in $args; do
 
            IFS="$save_ifs"
 
            func_quote_for_eval "$arg"
 
            lastarg="$lastarg $func_quote_for_eval_result"
 
          done
 
          IFS="$save_ifs"
 
          func_stripname ' ' '' "$lastarg"
 
          lastarg=$func_stripname_result
 
 
 
          # Add the arguments to base_compile.
 
          base_compile="$base_compile $lastarg"
 
          continue
 
          ;;
 
 
 
        *)
 
          # Accept the current argument as the source file.
 
          # The previous "srcfile" becomes the current argument.
 
          #
 
          lastarg="$srcfile"
 
          srcfile="$arg"
 
          ;;
 
        esac  #  case $arg
 
        ;;
 
      esac    #  case $arg_mode
 
 
 
      # Aesthetically quote the previous argument.
 
      func_quote_for_eval "$lastarg"
 
      base_compile="$base_compile $func_quote_for_eval_result"
 
    done # for arg
 
 
 
    case $arg_mode in
 
    arg)
 
      func_fatal_error "you must specify an argument for -Xcompile"
 
      ;;
 
    target)
 
      func_fatal_error "you must specify a target with \`-o'"
 
      ;;
 
    *)
 
      # Get the name of the library object.
 
      test -z "$libobj" && {
 
        func_basename "$srcfile"
 
        libobj="$func_basename_result"
 
      }
 
      ;;
 
    esac
 
 
 
    # Recognize several different file suffixes.
 
    # If the user specifies -o file.o, it is replaced with file.lo
 
    case $libobj in
 
    *.[cCFSifmso] | \
 
    *.ada | *.adb | *.ads | *.asm | \
 
    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
 
    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
 
      func_xform "$libobj"
 
      libobj=$func_xform_result
 
      ;;
 
    esac
 
 
 
    case $libobj in
 
    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
 
    *)
 
      func_fatal_error "cannot determine name of library object from \`$libobj'"
 
      ;;
 
    esac
 
 
 
    func_infer_tag $base_compile
 
 
 
    for arg in $later; do
 
      case $arg in
 
      -shared)
 
        test "$build_libtool_libs" != yes && \
 
          func_fatal_configuration "can not build a shared library"
 
        build_old_libs=no
 
        continue
 
        ;;
 
 
 
      -static)
 
        build_libtool_libs=no
 
        build_old_libs=yes
 
        continue
 
        ;;
 
 
 
      -prefer-pic)
 
        pic_mode=yes
 
        continue
 
        ;;
 
 
 
      -prefer-non-pic)
 
        pic_mode=no
 
        continue
 
        ;;
 
      esac
 
    done
 
 
 
    func_quote_for_eval "$libobj"
 
    test "X$libobj" != "X$func_quote_for_eval_result" \
 
      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'    &()|`$[]' \
 
      && func_warning "libobj name \`$libobj' may not contain shell special characters."
 
    func_dirname_and_basename "$obj" "/" ""
 
    objname="$func_basename_result"
 
    xdir="$func_dirname_result"
 
    lobj=${xdir}$objdir/$objname
 
 
 
    test -z "$base_compile" && \
 
      func_fatal_help "you must specify a compilation command"
 
 
 
    # Delete any leftover library objects.
 
    if test "$build_old_libs" = yes; then
 
      removelist="$obj $lobj $libobj ${libobj}T"
 
    else
 
      removelist="$lobj $libobj ${libobj}T"
 
    fi
 
 
 
    # On Cygwin there's no "real" PIC flag so we must build both object types
 
    case $host_os in
 
    cygwin* | mingw* | pw32* | os2* | cegcc*)
 
      pic_mode=default
 
      ;;
 
    esac
 
    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
 
      # non-PIC code in shared libraries is not supported
 
      pic_mode=default
 
    fi
 
 
 
    # Calculate the filename of the output object if compiler does
 
    # not support -o with -c
 
    if test "$compiler_c_o" = no; then
 
      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
 
      lockfile="$output_obj.lock"
 
    else
 
      output_obj=
 
      need_locks=no
 
      lockfile=
 
    fi
 
 
 
    # Lock this critical section if it is needed
 
    # We use this script file to make the link, it avoids creating a new file
 
    if test "$need_locks" = yes; then
 
      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 
        func_echo "Waiting for $lockfile to be removed"
 
        sleep 2
 
      done
 
    elif test "$need_locks" = warn; then
 
      if test -f "$lockfile"; then
 
        $ECHO "\
 
*** ERROR, $lockfile exists and contains:
 
`cat $lockfile 2>/dev/null`
 
 
 
This indicates that another process is trying to use the same
 
temporary object file, and libtool could not work around it because
 
your compiler does not support \`-c' and \`-o' together.  If you
 
repeat this compilation, it may succeed, by chance, but you had better
 
avoid parallel builds (make -j) in this platform, or get a better
 
compiler."
 
 
 
        $opt_dry_run || $RM $removelist
 
        exit $EXIT_FAILURE
 
      fi
 
      removelist="$removelist $output_obj"
 
      $ECHO "$srcfile" > "$lockfile"
 
    fi
 
 
 
    $opt_dry_run || $RM $removelist
 
    removelist="$removelist $lockfile"
 
    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
 
 
 
    if test -n "$fix_srcfile_path"; then
 
      eval srcfile=\"$fix_srcfile_path\"
 
    fi
 
    func_quote_for_eval "$srcfile"
 
    qsrcfile=$func_quote_for_eval_result
 
 
 
    # Only build a PIC object if we are building libtool libraries.
 
    if test "$build_libtool_libs" = yes; then
 
      # Without this assignment, base_compile gets emptied.
 
      fbsd_hideous_sh_bug=$base_compile
 
 
 
      if test "$pic_mode" != no; then
 
        command="$base_compile $qsrcfile $pic_flag"
 
      else
 
        # Don't build PIC code
 
        command="$base_compile $qsrcfile"
 
      fi
 
 
 
      func_mkdir_p "$xdir$objdir"
 
 
 
      if test -z "$output_obj"; then
 
        # Place PIC objects in $objdir
 
        command="$command -o $lobj"
 
      fi
 
 
 
      func_show_eval_locale "$command"  \
 
          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
 
 
      if test "$need_locks" = warn &&
 
         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 
        $ECHO "\
 
*** ERROR, $lockfile contains:
 
`cat $lockfile 2>/dev/null`
 
 
 
but it should contain:
 
$srcfile
 
 
 
This indicates that another process is trying to use the same
 
temporary object file, and libtool could not work around it because
 
your compiler does not support \`-c' and \`-o' together.  If you
 
repeat this compilation, it may succeed, by chance, but you had better
 
avoid parallel builds (make -j) in this platform, or get a better
 
compiler."
 
 
 
        $opt_dry_run || $RM $removelist
 
        exit $EXIT_FAILURE
 
      fi
 
 
 
      # Just move the object if needed, then go on to compile the next one
 
      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
 
        func_show_eval '$MV "$output_obj" "$lobj"' \
 
          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
 
      fi
 
 
 
      # Allow error messages only from the first compilation.
 
      if test "$suppress_opt" = yes; then
 
        suppress_output=' >/dev/null 2>&1'
 
      fi
 
    fi
 
 
 
    # Only build a position-dependent object if we build old libraries.
 
    if test "$build_old_libs" = yes; then
 
      if test "$pic_mode" != yes; then
 
        # Don't build PIC code
 
        command="$base_compile $qsrcfile$pie_flag"
 
      else
 
        command="$base_compile $qsrcfile $pic_flag"
 
      fi
 
      if test "$compiler_c_o" = yes; then
 
        command="$command -o $obj"
 
      fi
 
 
 
      # Suppress compiler output if we already did a PIC compilation.
 
      command="$command$suppress_output"
 
      func_show_eval_locale "$command" \
 
        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
 
 
      if test "$need_locks" = warn &&
 
         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 
        $ECHO "\
 
*** ERROR, $lockfile contains:
 
`cat $lockfile 2>/dev/null`
 
 
 
but it should contain:
 
$srcfile
 
 
 
This indicates that another process is trying to use the same
 
temporary object file, and libtool could not work around it because
 
your compiler does not support \`-c' and \`-o' together.  If you
 
repeat this compilation, it may succeed, by chance, but you had better
 
avoid parallel builds (make -j) in this platform, or get a better
 
compiler."
 
 
 
        $opt_dry_run || $RM $removelist
 
        exit $EXIT_FAILURE
 
      fi
 
 
 
      # Just move the object if needed
 
      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
 
        func_show_eval '$MV "$output_obj" "$obj"' \
 
          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
 
      fi
 
    fi
 
 
 
    $opt_dry_run || {
 
      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
 
 
      # Unlock the critical section if it was locked
 
      if test "$need_locks" != no; then
 
        removelist=$lockfile
 
        $RM "$lockfile"
 
      fi
 
    }
 
 
 
    exit $EXIT_SUCCESS
 
}
 
 
 
$opt_help || {
 
test "$mode" = compile && func_mode_compile ${1+"$@"}
 
}
 
 
 
func_mode_help ()
 
{
 
    # We need to display help for each of the modes.
 
    case $mode in
 
      "")
 
        # Generic help is extracted from the usage comments
 
        # at the start of this file.
 
        func_help
 
        ;;
 
 
 
      clean)
 
        $ECHO \
 
"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
 
 
 
Remove files from the build directory.
 
 
 
RM is the name of the program to use to delete files associated with each FILE
 
(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 
to RM.
 
 
 
If FILE is a libtool library, object or program, all the files associated
 
with it are deleted. Otherwise, only FILE itself is deleted using RM."
 
        ;;
 
 
 
      compile)
 
      $ECHO \
 
"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
 
 
 
Compile a source file into a libtool library object.
 
 
 
This mode accepts the following additional options:
 
 
 
  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
 
  -no-suppress      do not suppress compiler output for multiple passes
 
  -prefer-pic       try to building PIC objects only
 
  -prefer-non-pic   try to building non-PIC objects only
 
  -shared           do not build a \`.o' file suitable for static linking
 
  -static           only build a \`.o' file suitable for static linking
 
 
 
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 
from the given SOURCEFILE.
 
 
 
The output file name is determined by removing the directory component from
 
SOURCEFILE, then substituting the C source code suffix \`.c' with the
 
library object suffix, \`.lo'."
 
        ;;
 
 
 
      execute)
 
        $ECHO \
 
"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
 
 
 
Automatically set library path, then run a program.
 
 
 
This mode accepts the following additional options:
 
 
 
  -dlopen FILE      add the directory containing FILE to the library path
 
 
 
This mode sets the library path environment variable according to \`-dlopen'
 
flags.
 
 
 
If any of the ARGS are libtool executable wrappers, then they are translated
 
into their corresponding uninstalled binary, and any of their required library
 
directories are added to the library path.
 
 
 
Then, COMMAND is executed, with ARGS as arguments."
 
        ;;
 
 
 
      finish)
 
        $ECHO \
 
"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
 
 
 
Complete the installation of libtool libraries.
 
 
 
Each LIBDIR is a directory that contains libtool libraries.
 
 
 
The commands that this mode executes may require superuser privileges.  Use
 
the \`--dry-run' option if you just want to see what would be executed."
 
        ;;
 
 
 
      install)
 
        $ECHO \
 
"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
 
 
 
Install executables or libraries.
 
 
 
INSTALL-COMMAND is the installation command.  The first component should be
 
either the \`install' or \`cp' program.
 
 
 
The following components of INSTALL-COMMAND are treated specially:
 
 
 
  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 
 
The rest of the components are interpreted as arguments to that command (only
 
BSD-compatible install options are recognized)."
 
        ;;
 
 
 
      link)
 
        $ECHO \
 
"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
 
 
 
Link object files or libraries together to form another library, or to
 
create an executable program.
 
 
 
LINK-COMMAND is a command using the C compiler that you would use to create
 
a program from several object files.
 
 
 
The following components of LINK-COMMAND are treated specially:
 
 
 
  -all-static       do not do any dynamic linking at all
 
  -avoid-version    do not add a version suffix if possible
 
  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
 
  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
 
  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
 
  -export-symbols SYMFILE
 
                    try to export only the symbols listed in SYMFILE
 
  -export-symbols-regex REGEX
 
                    try to export only the symbols matching REGEX
 
  -LLIBDIR          search LIBDIR for required installed libraries
 
  -lNAME            OUTPUT-FILE requires the installed library libNAME
 
  -module           build a library that can dlopened
 
  -no-fast-install  disable the fast-install mode
 
  -no-install       link a not-installable executable
 
  -no-undefined     declare that a library does not refer to external symbols
 
  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
 
  -objectlist FILE  Use a list of object files found in FILE to specify objects
 
  -precious-files-regex REGEX
 
                    don't remove output files matching REGEX
 
  -release RELEASE  specify package release information
 
  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
 
  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
 
  -shared           only do dynamic linking of libtool libraries
 
  -shrext SUFFIX    override the standard shared library file extension
 
  -static           do not do any dynamic linking of uninstalled libtool libraries
 
  -static-libtool-libs
 
                    do not do any dynamic linking of libtool libraries
 
  -version-info CURRENT[:REVISION[:AGE]]
 
                    specify library version info [each variable defaults to 0]
 
  -weak LIBNAME     declare that the target provides the LIBNAME interface
 
 
 
All other options (arguments beginning with \`-') are ignored.
 
 
 
Every other argument is treated as a filename.  Files ending in \`.la' are
 
treated as uninstalled libtool libraries, other files are standard or library
 
object files.
 
 
 
If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
 
only library objects (\`.lo' files) may be specified, and \`-rpath' is
 
required, except when creating a convenience library.
 
 
 
If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
 
using \`ar' and \`ranlib', or on Windows using \`lib'.
 
 
 
If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
 
is created, otherwise an executable program is created."
 
        ;;
 
 
 
      uninstall)
 
        $ECHO \
 
"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
 
 
 
Remove libraries from an installation directory.
 
 
 
RM is the name of the program to use to delete files associated with each FILE
 
(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 
to RM.
 
 
 
If FILE is a libtool library, all the files associated with it are deleted.
 
Otherwise, only FILE itself is deleted using RM."
 
        ;;
 
 
 
      *)
 
        func_fatal_help "invalid operation mode \`$mode'"
 
        ;;
 
    esac
 
 
 
    $ECHO
 
    $ECHO "Try \`$progname --help' for more information about other modes."
 
 
 
    exit $?
 
}
 
 
 
  # Now that we've collected a possible --mode arg, show help if necessary
 
  $opt_help && func_mode_help
 
 
 
 
 
# func_mode_execute arg...
 
func_mode_execute ()
 
{
 
    $opt_debug
 
    # The first argument is the command name.
 
    cmd="$nonopt"
 
    test -z "$cmd" && \
 
      func_fatal_help "you must specify a COMMAND"
 
 
 
    # Handle -dlopen flags immediately.
 
    for file in $execute_dlfiles; do
 
      test -f "$file" \
 
        || func_fatal_help "\`$file' is not a file"
 
 
 
      dir=
 
      case $file in
 
      *.la)
 
        # Check to see that this really is a libtool archive.
 
        func_lalib_unsafe_p "$file" \
 
          || func_fatal_help "\`$lib' is not a valid libtool archive"
 
 
 
        # Read the libtool library.
 
        dlname=
 
        library_names=
 
        func_source "$file"
 
 
 
        # Skip this library if it cannot be dlopened.
 
        if test -z "$dlname"; then
 
          # Warn if it was a shared library.
 
          test -n "$library_names" && \
 
            func_warning "\`$file' was not linked with \`-export-dynamic'"
 
          continue
 
        fi
 
 
 
        func_dirname "$file" "" "."
 
        dir="$func_dirname_result"
 
 
 
        if test -f "$dir/$objdir/$dlname"; then
 
          dir="$dir/$objdir"
 
        else
 
          if test ! -f "$dir/$dlname"; then
 
            func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
 
          fi
 
        fi
 
        ;;
 
 
 
      *.lo)
 
        # Just add the directory containing the .lo file.
 
        func_dirname "$file" "" "."
 
        dir="$func_dirname_result"
 
        ;;
 
 
 
      *)
 
        func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
 
        continue
 
        ;;
 
      esac
 
 
 
      # Get the absolute pathname.
 
      absdir=`cd "$dir" && pwd`
 
      test -n "$absdir" && dir="$absdir"
 
 
 
      # Now add the directory to shlibpath_var.
 
      if eval "test -z \"\$$shlibpath_var\""; then
 
        eval "$shlibpath_var=\"\$dir\""
 
      else
 
        eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
 
      fi
 
    done
 
 
 
    # This variable tells wrapper scripts just to set shlibpath_var
 
    # rather than running their programs.
 
    libtool_execute_magic="$magic"
 
 
 
    # Check if any of the arguments is a wrapper script.
 
    args=
 
    for file
 
    do
 
      case $file in
 
      -*) ;;
 
      *)
 
        # Do a test to see if this is really a libtool program.
 
        if func_ltwrapper_script_p "$file"; then
 
          func_source "$file"
 
          # Transform arg to wrapped name.
 
          file="$progdir/$program"
 
        elif func_ltwrapper_executable_p "$file"; then
 
          func_ltwrapper_scriptname "$file"
 
          func_source "$func_ltwrapper_scriptname_result"
 
          # Transform arg to wrapped name.
 
          file="$progdir/$program"
 
        fi
 
        ;;
 
      esac
 
      # Quote arguments (to preserve shell metacharacters).
 
      func_quote_for_eval "$file"
 
      args="$args $func_quote_for_eval_result"
 
    done
 
 
 
    if test "X$opt_dry_run" = Xfalse; then
 
      if test -n "$shlibpath_var"; then
 
        # Export the shlibpath_var.
 
        eval "export $shlibpath_var"
 
      fi
 
 
 
      # Restore saved environment variables
 
      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 
      do
 
        eval "if test \"\${save_$lt_var+set}\" = set; then
 
                $lt_var=\$save_$lt_var; export $lt_var
 
              else
 
                $lt_unset $lt_var
 
              fi"
 
      done
 
 
 
      # Now prepare to actually exec the command.
 
      exec_cmd="\$cmd$args"
 
    else
 
      # Display what would be done.
 
      if test -n "$shlibpath_var"; then
 
        eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
 
        $ECHO "export $shlibpath_var"
 
      fi
 
      $ECHO "$cmd$args"
 
      exit $EXIT_SUCCESS
 
    fi
 
}
 
 
 
test "$mode" = execute && func_mode_execute ${1+"$@"}
 
 
 
 
 
# func_mode_finish arg...
 
func_mode_finish ()
 
{
 
    $opt_debug
 
    libdirs="$nonopt"
 
    admincmds=
 
 
 
    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
 
      for dir
 
      do
 
        libdirs="$libdirs $dir"
 
      done
 
 
 
      for libdir in $libdirs; do
 
        if test -n "$finish_cmds"; then
 
          # Do each command in the finish commands.
 
          func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
 
'"$cmd"'"'
 
        fi
 
        if test -n "$finish_eval"; then
 
          # Do the single finish_eval.
 
          eval cmds=\"$finish_eval\"
 
          $opt_dry_run || eval "$cmds" || admincmds="$admincmds
 
       $cmds"
 
        fi
 
      done
 
    fi
 
 
 
    # Exit here if they wanted silent mode.
 
    $opt_silent && exit $EXIT_SUCCESS
 
 
 
    $ECHO "X----------------------------------------------------------------------" | $Xsed
 
    $ECHO "Libraries have been installed in:"
 
    for libdir in $libdirs; do
 
      $ECHO "   $libdir"
 
    done
 
    $ECHO
 
    $ECHO "If you ever happen to want to link against installed libraries"
 
    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
 
    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
 
    $ECHO "flag during linking and do at least one of the following:"
 
    if test -n "$shlibpath_var"; then
 
      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
 
      $ECHO "     during execution"
 
    fi
 
    if test -n "$runpath_var"; then
 
      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
 
      $ECHO "     during linking"
 
    fi
 
    if test -n "$hardcode_libdir_flag_spec"; then
 
      libdir=LIBDIR
 
      eval flag=\"$hardcode_libdir_flag_spec\"
 
 
 
      $ECHO "   - use the \`$flag' linker flag"
 
    fi
 
    if test -n "$admincmds"; then
 
      $ECHO "   - have your system administrator run these commands:$admincmds"
 
    fi
 
    if test -f /etc/ld.so.conf; then
 
      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
 
    fi
 
    $ECHO
 
 
 
    $ECHO "See any operating system documentation about shared libraries for"
 
    case $host in
 
      solaris2.[6789]|solaris2.1[0-9])
 
        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
 
        $ECHO "pages."
 
        ;;
 
      *)
 
        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
 
        ;;
 
    esac
 
    $ECHO "X----------------------------------------------------------------------" | $Xsed
 
    exit $EXIT_SUCCESS
 
}
 
 
 
test "$mode" = finish && func_mode_finish ${1+"$@"}
 
 
 
 
 
# func_mode_install arg...
 
func_mode_install ()
 
{
 
    $opt_debug
 
    # There may be an optional sh(1) argument at the beginning of
 
    # install_prog (especially on Windows NT).
 
    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
 
       # Allow the use of GNU shtool's install command.
 
       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
 
      # Aesthetically quote it.
 
      func_quote_for_eval "$nonopt"
 
      install_prog="$func_quote_for_eval_result "
 
      arg=$1
 
      shift
 
    else
 
      install_prog=
 
      arg=$nonopt
 
    fi
 
 
 
    # The real first argument should be the name of the installation program.
 
    # Aesthetically quote it.
 
    func_quote_for_eval "$arg"
 
    install_prog="$install_prog$func_quote_for_eval_result"
 
 
 
    # We need to accept at least all the BSD install flags.
 
    dest=
 
    files=
 
    opts=
 
    prev=
 
    install_type=
 
    isdir=no
 
    stripme=
 
    for arg
 
    do
 
      if test -n "$dest"; then
 
        files="$files $dest"
 
        dest=$arg
 
        continue
 
      fi
 
 
 
      case $arg in
 
      -d) isdir=yes ;;
 
      -f)
 
        case " $install_prog " in
 
        *[\\\ /]cp\ *) ;;
 
        *) prev=$arg ;;
 
        esac
 
        ;;
 
      -g | -m | -o)
 
        prev=$arg
 
        ;;
 
      -s)
 
        stripme=" -s"
 
        continue
 
        ;;
 
      -*)
 
        ;;
 
      *)
 
        # If the previous option needed an argument, then skip it.
 
        if test -n "$prev"; then
 
          prev=
 
        else
 
          dest=$arg
 
          continue
 
        fi
 
        ;;
 
      esac
 
 
 
      # Aesthetically quote the argument.
 
      func_quote_for_eval "$arg"
 
      install_prog="$install_prog $func_quote_for_eval_result"
 
    done
 
 
 
    test -z "$install_prog" && \
 
      func_fatal_help "you must specify an install program"
 
 
 
    test -n "$prev" && \
 
      func_fatal_help "the \`$prev' option requires an argument"
 
 
 
    if test -z "$files"; then
 
      if test -z "$dest"; then
 
        func_fatal_help "no file or destination specified"
 
      else
 
        func_fatal_help "you must specify a destination"
 
      fi
 
    fi
 
 
 
    # Strip any trailing slash from the destination.
 
    func_stripname '' '/' "$dest"
 
    dest=$func_stripname_result
 
 
 
    # Check to see that the destination is a directory.
 
    test -d "$dest" && isdir=yes
 
    if test "$isdir" = yes; then
 
      destdir="$dest"
 
      destname=
 
    else
 
      func_dirname_and_basename "$dest" "" "."
 
      destdir="$func_dirname_result"
 
      destname="$func_basename_result"
 
 
 
      # Not a directory, so check to see that there is only one file specified.
 
      set dummy $files; shift
 
      test "$#" -gt 1 && \
 
        func_fatal_help "\`$dest' is not a directory"
 
    fi
 
    case $destdir in
 
    [\\/]* | [A-Za-z]:[\\/]*) ;;
 
    *)
 
      for file in $files; do
 
        case $file in
 
        *.lo) ;;
 
        *)
 
          func_fatal_help "\`$destdir' must be an absolute directory name"
 
          ;;
 
        esac
 
      done
 
      ;;
 
    esac
 
 
 
    # This variable tells wrapper scripts just to set variables rather
 
    # than running their programs.
 
    libtool_install_magic="$magic"
 
 
 
    staticlibs=
 
    future_libdirs=
 
    current_libdirs=
 
    for file in $files; do
 
 
 
      # Do each installation.
 
      case $file in
 
      *.$libext)
 
        # Do the static libraries later.
 
        staticlibs="$staticlibs $file"
 
        ;;
 
 
 
      *.la)
 
        # Check to see that this really is a libtool archive.
 
        func_lalib_unsafe_p "$file" \
 
          || func_fatal_help "\`$file' is not a valid libtool archive"
 
 
 
        library_names=
 
        old_library=
 
        relink_command=
 
        func_source "$file"
 
 
 
        # Add the libdir to current_libdirs if it is the destination.
 
        if test "X$destdir" = "X$libdir"; then
 
          case "$current_libdirs " in
 
          *" $libdir "*) ;;
 
          *) current_libdirs="$current_libdirs $libdir" ;;
 
          esac
 
        else
 
          # Note the libdir as a future libdir.
 
          case "$future_libdirs " in
 
          *" $libdir "*) ;;
 
          *) future_libdirs="$future_libdirs $libdir" ;;
 
          esac
 
        fi
 
 
 
        func_dirname "$file" "/" ""
 
        dir="$func_dirname_result"
 
        dir="$dir$objdir"
 
 
 
        if test -n "$relink_command"; then
 
          # Determine the prefix the user has applied to our future dir.
 
          inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
 
 
 
          # Don't allow the user to place us outside of our expected
 
          # location b/c this prevents finding dependent libraries that
 
          # are installed to the same prefix.
 
          # At present, this check doesn't affect windows .dll's that
 
          # are installed into $libdir/../bin (currently, that works fine)
 
          # but it's something to keep an eye on.
 
          test "$inst_prefix_dir" = "$destdir" && \
 
            func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
 
 
 
          if test -n "$inst_prefix_dir"; then
 
            # Stick the inst_prefix_dir data into the link command.
 
            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
 
          else
 
            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
 
          fi
 
 
 
          func_warning "relinking \`$file'"
 
          func_show_eval "$relink_command" \
 
            'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
 
        fi
 
 
 
        # See the names of the shared library.
 
        set dummy $library_names; shift
 
        if test -n "$1"; then
 
          realname="$1"
 
          shift
 
 
 
          srcname="$realname"
 
          test -n "$relink_command" && srcname="$realname"T
 
 
 
          # Install the shared library and build the symlinks.
 
          func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
 
              'exit $?'
 
          tstripme="$stripme"
 
          case $host_os in
 
          cygwin* | mingw* | pw32* | cegcc*)
 
            case $realname in
 
            *.dll.a)
 
              tstripme=""
 
              ;;
 
            esac
 
            ;;
 
          esac
 
          if test -n "$tstripme" && test -n "$striplib"; then
 
            func_show_eval "$striplib $destdir/$realname" 'exit $?'
 
          fi
 
 
 
          if test "$#" -gt 0; then
 
            # Delete the old symlinks, and create new ones.
 
            # Try `ln -sf' first, because the `ln' binary might depend on
 
            # the symlink we replace!  Solaris /bin/ln does not understand -f,
 
            # so we also need to try rm && ln -s.
 
            for linkname
 
            do
 
              test "$linkname" != "$realname" \
 
                && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
 
            done
 
          fi
 
 
 
          # Do each command in the postinstall commands.
 
          lib="$destdir/$realname"
 
          func_execute_cmds "$postinstall_cmds" 'exit $?'
 
        fi
 
 
 
        # Install the pseudo-library for information purposes.
 
        func_basename "$file"
 
        name="$func_basename_result"
 
        instname="$dir/$name"i
 
        func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
 
 
        # Maybe install the static library, too.
 
        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
 
        ;;
 
 
 
      *.lo)
 
        # Install (i.e. copy) a libtool object.
 
 
 
        # Figure out destination file name, if it wasn't already specified.
 
        if test -n "$destname"; then
 
          destfile="$destdir/$destname"
 
        else
 
          func_basename "$file"
 
          destfile="$func_basename_result"
 
          destfile="$destdir/$destfile"
 
        fi
 
 
 
        # Deduce the name of the destination old-style object file.
 
        case $destfile in
 
        *.lo)
 
          func_lo2o "$destfile"
 
          staticdest=$func_lo2o_result
 
          ;;
 
        *.$objext)
 
          staticdest="$destfile"
 
          destfile=
 
          ;;
 
        *)
 
          func_fatal_help "cannot copy a libtool object to \`$destfile'"
 
          ;;
 
        esac
 
 
 
        # Install the libtool object if requested.
 
        test -n "$destfile" && \
 
          func_show_eval "$install_prog $file $destfile" 'exit $?'
 
 
 
        # Install the old object if enabled.
 
        if test "$build_old_libs" = yes; then
 
          # Deduce the name of the old-style object file.
 
          func_lo2o "$file"
 
          staticobj=$func_lo2o_result
 
          func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
 
        fi
 
        exit $EXIT_SUCCESS
 
        ;;
 
 
 
      *)
 
        # Figure out destination file name, if it wasn't already specified.
 
        if test -n "$destname"; then
 
          destfile="$destdir/$destname"
 
        else
 
          func_basename "$file"
 
          destfile="$func_basename_result"
 
          destfile="$destdir/$destfile"
 
        fi
 
 
 
        # If the file is missing, and there is a .exe on the end, strip it
 
        # because it is most likely a libtool script we actually want to
 
        # install
 
        stripped_ext=""
 
        case $file in
 
          *.exe)
 
            if test ! -f "$file"; then
 
              func_stripname '' '.exe' "$file"
 
              file=$func_stripname_result
 
              stripped_ext=".exe"
 
            fi
 
            ;;
 
        esac
 
 
 
        # Do a test to see if this is really a libtool program.
 
        case $host in
 
        *cygwin* | *mingw*)
 
            if func_ltwrapper_executable_p "$file"; then
 
              func_ltwrapper_scriptname "$file"
 
              wrapper=$func_ltwrapper_scriptname_result
 
            else
 
              func_stripname '' '.exe' "$file"
 
              wrapper=$func_stripname_result
 
            fi
 
            ;;
 
        *)
 
            wrapper=$file
 
            ;;
 
        esac
 
        if func_ltwrapper_script_p "$wrapper"; then
 
          notinst_deplibs=
 
          relink_command=
 
 
 
          func_source "$wrapper"
 
 
 
          # Check the variables that should have been set.
 
          test -z "$generated_by_libtool_version" && \
 
            func_fatal_error "invalid libtool wrapper script \`$wrapper'"
 
 
 
          finalize=yes
 
          for lib in $notinst_deplibs; do
 
            # Check to see that each library is installed.
 
            libdir=
 
            if test -f "$lib"; then
 
              func_source "$lib"
 
            fi
 
            libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
 
            if test -n "$libdir" && test ! -f "$libfile"; then
 
              func_warning "\`$lib' has not been installed in \`$libdir'"
 
              finalize=no
 
            fi
 
          done
 
 
 
          relink_command=
 
          func_source "$wrapper"
 
 
 
          outputname=
 
          if test "$fast_install" = no && test -n "$relink_command"; then
 
            $opt_dry_run || {
 
              if test "$finalize" = yes; then
 
                tmpdir=`func_mktempdir`
 
                func_basename "$file$stripped_ext"
 
                file="$func_basename_result"
 
                outputname="$tmpdir/$file"
 
                # Replace the output file specification.
 
                relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
 
 
                $opt_silent || {
 
                  func_quote_for_expand "$relink_command"
 
                  eval "func_echo $func_quote_for_expand_result"
 
                }
 
                if eval "$relink_command"; then :
 
                  else
 
                  func_error "error: relink \`$file' with the above command before installing it"
 
                  $opt_dry_run || ${RM}r "$tmpdir"
 
                  continue
 
                fi
 
                file="$outputname"
 
              else
 
                func_warning "cannot relink \`$file'"
 
              fi
 
            }
 
          else
 
            # Install the binary that we compiled earlier.
 
            file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
 
          fi
 
        fi
 
 
 
        # remove .exe since cygwin /usr/bin/install will append another
 
        # one anyway
 
        case $install_prog,$host in
 
        */usr/bin/install*,*cygwin*)
 
          case $file:$destfile in
 
          *.exe:*.exe)
 
            # this is ok
 
            ;;
 
          *.exe:*)
 
            destfile=$destfile.exe
 
            ;;
 
          *:*.exe)
 
            func_stripname '' '.exe' "$destfile"
 
            destfile=$func_stripname_result
 
            ;;
 
          esac
 
          ;;
 
        esac
 
        func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
 
        $opt_dry_run || if test -n "$outputname"; then
 
          ${RM}r "$tmpdir"
 
        fi
 
        ;;
 
      esac
 
    done
 
 
 
    for file in $staticlibs; do
 
      func_basename "$file"
 
      name="$func_basename_result"
 
 
 
      # Set up the ranlib parameters.
 
      oldlib="$destdir/$name"
 
 
 
      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
 
 
 
      if test -n "$stripme" && test -n "$old_striplib"; then
 
        func_show_eval "$old_striplib $oldlib" 'exit $?'
 
      fi
 
 
 
      # Do each command in the postinstall commands.
 
      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
 
    done
 
 
 
    test -n "$future_libdirs" && \
 
      func_warning "remember to run \`$progname --finish$future_libdirs'"
 
 
 
    if test -n "$current_libdirs"; then
 
      # Maybe just do a dry run.
 
      $opt_dry_run && current_libdirs=" -n$current_libdirs"
 
      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
 
    else
 
      exit $EXIT_SUCCESS
 
    fi
 
}
 
 
 
test "$mode" = install && func_mode_install ${1+"$@"}
 
 
 
 
 
# func_generate_dlsyms outputname originator pic_p
 
# Extract symbols from dlprefiles and create ${outputname}S.o with
 
# a dlpreopen symbol table.
 
func_generate_dlsyms ()
 
{
 
    $opt_debug
 
    my_outputname="$1"
 
    my_originator="$2"
 
    my_pic_p="${3-no}"
 
    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
 
    my_dlsyms=
 
 
 
    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 
      if test -n "$NM" && test -n "$global_symbol_pipe"; then
 
        my_dlsyms="${my_outputname}S.c"
 
      else
 
        func_error "not configured to extract global symbols from dlpreopened files"
 
      fi
 
    fi
 
 
 
    if test -n "$my_dlsyms"; then
 
      case $my_dlsyms in
 
      "") ;;
 
      *.c)
 
        # Discover the nlist of each of the dlfiles.
 
        nlist="$output_objdir/${my_outputname}.nm"
 
 
 
        func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
 
 
 
        # Parse the name list into a source file.
 
        func_verbose "creating $output_objdir/$my_dlsyms"
 
 
 
        $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
 
/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
 
/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
 
 
 
#ifdef __cplusplus
 
extern \"C\" {
 
#endif
 
 
 
/* External symbol declarations for the compiler. */\
 
"
 
 
 
        if test "$dlself" = yes; then
 
          func_verbose "generating symbol list for \`$output'"
 
 
 
          $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
 
 
          # Add our own program objects to the symbol list.
 
          progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 
          for progfile in $progfiles; do
 
            func_verbose "extracting global C symbols from \`$progfile'"
 
            $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
 
          done
 
 
 
          if test -n "$exclude_expsyms"; then
 
            $opt_dry_run || {
 
              eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
 
              eval '$MV "$nlist"T "$nlist"'
 
            }
 
          fi
 
 
 
          if test -n "$export_symbols_regex"; then
 
            $opt_dry_run || {
 
              eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
 
              eval '$MV "$nlist"T "$nlist"'
 
            }
 
          fi
 
 
 
          # Prepare the list of exported symbols
 
          if test -z "$export_symbols"; then
 
            export_symbols="$output_objdir/$outputname.exp"
 
            $opt_dry_run || {
 
              $RM $export_symbols
 
              eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 
              case $host in
 
              *cygwin* | *mingw* | *cegcc* )
 
                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 
                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
 
                ;;
 
              esac
 
            }
 
          else
 
            $opt_dry_run || {
 
              eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
 
              eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 
              eval '$MV "$nlist"T "$nlist"'
 
              case $host in
 
                *cygwin | *mingw* | *cegcc* )
 
                  eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 
                  eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
 
                  ;;
 
              esac
 
            }
 
          fi
 
        fi
 
 
 
        for dlprefile in $dlprefiles; do
 
          func_verbose "extracting global C symbols from \`$dlprefile'"
 
          func_basename "$dlprefile"
 
          name="$func_basename_result"
 
          $opt_dry_run || {
 
            eval '$ECHO ": $name " >> "$nlist"'
 
            eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
 
          }
 
        done
 
 
 
        $opt_dry_run || {
 
          # Make sure we have at least an empty file.
 
          test -f "$nlist" || : > "$nlist"
 
 
 
          if test -n "$exclude_expsyms"; then
 
            $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
 
            $MV "$nlist"T "$nlist"
 
          fi
 
 
 
          # Try sorting and uniquifying the output.
 
          if $GREP -v "^: " < "$nlist" |
 
              if sort -k 3 </dev/null >/dev/null 2>&1; then
 
                sort -k 3
 
              else
 
                sort +2
 
              fi |
 
              uniq > "$nlist"S; then
 
            :
 
          else
 
            $GREP -v "^: " < "$nlist" > "$nlist"S
 
          fi
 
 
 
          if test -f "$nlist"S; then
 
            eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
 
          else
 
            $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
 
          fi
 
 
 
          $ECHO >> "$output_objdir/$my_dlsyms" "\
 
 
 
/* The mapping between symbol names and symbols.  */
 
typedef struct {
 
  const char *name;
 
  void *address;
 
} lt_dlsymlist;
 
"
 
          case $host in
 
          *cygwin* | *mingw* | *cegcc* )
 
            $ECHO >> "$output_objdir/$my_dlsyms" "\
 
/* DATA imports from DLLs on WIN32 con't be const, because
 
   runtime relocations are performed -- see ld's documentation
 
   on pseudo-relocs.  */"
 
            lt_dlsym_const= ;;
 
          *osf5*)
 
            echo >> "$output_objdir/$my_dlsyms" "\
 
/* This system does not cope well with relocations in const data */"
 
            lt_dlsym_const= ;;
 
          *)
 
            lt_dlsym_const=const ;;
 
          esac
 
 
 
          $ECHO >> "$output_objdir/$my_dlsyms" "\
 
extern $lt_dlsym_const lt_dlsymlist
 
lt_${my_prefix}_LTX_preloaded_symbols[];
 
$lt_dlsym_const lt_dlsymlist
 
lt_${my_prefix}_LTX_preloaded_symbols[] =
 
{\
 
  { \"$my_originator\", (void *) 0 },"
 
 
 
          case $need_lib_prefix in
 
          no)
 
            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
 
            ;;
 
          *)
 
            eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
 
            ;;
 
          esac
 
          $ECHO >> "$output_objdir/$my_dlsyms" "\
 
  {0, (void *) 0}
 
};
 
 
 
/* This works around a problem in FreeBSD linker */
 
#ifdef FREEBSD_WORKAROUND
 
static const void *lt_preloaded_setup() {
 
  return lt_${my_prefix}_LTX_preloaded_symbols;
 
}
 
#endif
 
 
 
#ifdef __cplusplus
 
}
 
#endif\
 
"
 
        } # !$opt_dry_run
 
 
 
        pic_flag_for_symtable=
 
        case "$compile_command " in
 
        *" -static "*) ;;
 
        *)
 
          case $host in
 
          # compiling the symbol table file with pic_flag works around
 
          # a FreeBSD bug that causes programs to crash when -lm is
 
          # linked before any other PIC object.  But we must not use
 
          # pic_flag when linking with -static.  The problem exists in
 
          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
 
          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
 
            pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
 
          *-*-hpux*)
 
            pic_flag_for_symtable=" $pic_flag"  ;;
 
          *)
 
            if test "X$my_pic_p" != Xno; then
 
              pic_flag_for_symtable=" $pic_flag"
 
            fi
 
            ;;
 
          esac
 
          ;;
 
        esac
 
        symtab_cflags=
 
        for arg in $LTCFLAGS; do
 
          case $arg in
 
          -pie | -fpie | -fPIE) ;;
 
          *) symtab_cflags="$symtab_cflags $arg" ;;
 
          esac
 
        done
 
 
 
        # Now compile the dynamic symbol file.
 
        func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
 
 
 
        # Clean up the generated files.
 
        func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
 
 
 
        # Transform the symbol file into the correct name.
 
        symfileobj="$output_objdir/${my_outputname}S.$objext"
 
        case $host in
 
        *cygwin* | *mingw* | *cegcc* )
 
          if test -f "$output_objdir/$my_outputname.def"; then
 
            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 
            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 
          else
 
            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 
            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 
          fi
 
          ;;
 
        *)
 
          compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 
          finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 
          ;;
 
        esac
 
        ;;
 
      *)
 
        func_fatal_error "unknown suffix for \`$my_dlsyms'"
 
        ;;
 
      esac
 
    else
 
      # We keep going just in case the user didn't refer to
 
      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
 
      # really was required.
 
 
 
      # Nullify the symbol file.
 
      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
 
      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
 
    fi
 
}
 
 
 
# func_win32_libid arg
 
# return the library type of file 'arg'
 
#
 
# Need a lot of goo to handle *both* DLLs and import libs
 
# Has to be a shell function in order to 'eat' the argument
 
# that is supplied when $file_magic_command is called.
 
func_win32_libid ()
 
{
 
  $opt_debug
 
  win32_libid_type="unknown"
 
  win32_fileres=`file -L $1 2>/dev/null`
 
  case $win32_fileres in
 
  *ar\ archive\ import\ library*) # definitely import
 
    win32_libid_type="x86 archive import"
 
    ;;
 
  *ar\ archive*) # could be an import, or static
 
    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
 
       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
 
      win32_nmres=`eval $NM -f posix -A $1 |
 
        $SED -n -e '
 
            1,100{
 
                / I /{
 
                    s,.*,import,
 
                    p
 
                    q
 
                }
 
            }'`
 
      case $win32_nmres in
 
      import*)  win32_libid_type="x86 archive import";;
 
      *)        win32_libid_type="x86 archive static";;
 
      esac
 
    fi
 
    ;;
 
  *DLL*)
 
    win32_libid_type="x86 DLL"
 
    ;;
 
  *executable*) # but shell scripts are "executable" too...
 
    case $win32_fileres in
 
    *MS\ Windows\ PE\ Intel*)
 
      win32_libid_type="x86 DLL"
 
      ;;
 
    esac
 
    ;;
 
  esac
 
  $ECHO "$win32_libid_type"
 
}
 
 
 
 
 
 
 
# func_extract_an_archive dir oldlib
 
func_extract_an_archive ()
 
{
 
    $opt_debug
 
    f_ex_an_ar_dir="$1"; shift
 
    f_ex_an_ar_oldlib="$1"
 
    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
 
    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
 
     :
 
    else
 
      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
 
    fi
 
}
 
 
 
 
 
# func_extract_archives gentop oldlib ...
 
func_extract_archives ()
 
{
 
    $opt_debug
 
    my_gentop="$1"; shift
 
    my_oldlibs=${1+"$@"}
 
    my_oldobjs=""
 
    my_xlib=""
 
    my_xabs=""
 
    my_xdir=""
 
 
 
    for my_xlib in $my_oldlibs; do
 
      # Extract the objects.
 
      case $my_xlib in
 
        [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
 
        *) my_xabs=`pwd`"/$my_xlib" ;;
 
      esac
 
      func_basename "$my_xlib"
 
      my_xlib="$func_basename_result"
 
      my_xlib_u=$my_xlib
 
      while :; do
 
        case " $extracted_archives " in
 
        *" $my_xlib_u "*)
 
          func_arith $extracted_serial + 1
 
          extracted_serial=$func_arith_result
 
          my_xlib_u=lt$extracted_serial-$my_xlib ;;
 
        *) break ;;
 
        esac
 
      done
 
      extracted_archives="$extracted_archives $my_xlib_u"
 
      my_xdir="$my_gentop/$my_xlib_u"
 
 
 
      func_mkdir_p "$my_xdir"
 
 
 
      case $host in
 
      *-darwin*)
 
        func_verbose "Extracting $my_xabs"
 
        # Do not bother doing anything if just a dry run
 
        $opt_dry_run || {
 
          darwin_orig_dir=`pwd`
 
          cd $my_xdir || exit $?
 
          darwin_archive=$my_xabs
 
          darwin_curdir=`pwd`
 
          darwin_base_archive=`basename "$darwin_archive"`
 
          darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
 
          if test -n "$darwin_arches"; then
 
            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
 
            darwin_arch=
 
            func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
 
            for darwin_arch in  $darwin_arches ; do
 
              func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
 
              $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
 
              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
 
              func_extract_an_archive "`pwd`" "${darwin_base_archive}"
 
              cd "$darwin_curdir"
 
              $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
 
            done # $darwin_arches
 
            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
 
            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
 
            darwin_file=
 
            darwin_files=
 
            for darwin_file in $darwin_filelist; do
 
              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
 
              $LIPO -create -output "$darwin_file" $darwin_files
 
            done # $darwin_filelist
 
            $RM -rf unfat-$$
 
            cd "$darwin_orig_dir"
 
          else
 
            cd $darwin_orig_dir
 
            func_extract_an_archive "$my_xdir" "$my_xabs"
 
          fi # $darwin_arches
 
        } # !$opt_dry_run
 
        ;;
 
      *)
 
        func_extract_an_archive "$my_xdir" "$my_xabs"
 
        ;;
 
      esac
 
      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
 
    done
 
 
 
    func_extract_archives_result="$my_oldobjs"
 
}
 
 
 
 
 
 
 
# func_emit_wrapper_part1 [arg=no]
 
#
 
# Emit the first part of a libtool wrapper script on stdout.
 
# For more information, see the description associated with
 
# func_emit_wrapper(), below.
 
func_emit_wrapper_part1 ()
 
{
 
        func_emit_wrapper_part1_arg1=no
 
        if test -n "$1" ; then
 
          func_emit_wrapper_part1_arg1=$1
 
        fi
 
 
 
        $ECHO "\
 
#! $SHELL
 
 
 
# $output - temporary wrapper script for $objdir/$outputname
 
# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
#
 
# The $output program cannot be directly executed until all the libtool
 
# libraries that it depends on are installed.
 
#
 
# This wrapper script should never be moved out of the build directory.
 
# If it is, it will not operate correctly.
 
 
 
# Sed substitution that helps us do robust quoting.  It backslashifies
 
# metacharacters that are still active within double-quoted strings.
 
Xsed='${SED} -e 1s/^X//'
 
sed_quote_subst='$sed_quote_subst'
 
 
 
# Be Bourne compatible
 
if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
 
  emulate sh
 
  NULLCMD=:
 
  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
 
  # is contrary to our usage.  Disable this feature.
 
  alias -g '\${1+\"\$@\"}'='\"\$@\"'
 
  setopt NO_GLOB_SUBST
 
else
 
  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
 
fi
 
BIN_SH=xpg4; export BIN_SH # for Tru64
 
DUALCASE=1; export DUALCASE # for MKS sh
 
 
 
# The HP-UX ksh and POSIX shell print the target directory to stdout
 
# if CDPATH is set.
 
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 
 
relink_command=\"$relink_command\"
 
 
 
# This environment variable determines our operation mode.
 
if test \"\$libtool_install_magic\" = \"$magic\"; then
 
  # install mode needs the following variables:
 
  generated_by_libtool_version='$macro_version'
 
  notinst_deplibs='$notinst_deplibs'
 
else
 
  # When we are sourced in execute mode, \$file and \$ECHO are already set.
 
  if test \"\$libtool_execute_magic\" != \"$magic\"; then
 
    ECHO=\"$qecho\"
 
    file=\"\$0\"
 
    # Make sure echo works.
 
    if test \"X\$1\" = X--no-reexec; then
 
      # Discard the --no-reexec flag, and continue.
 
      shift
 
    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
 
      # Yippee, \$ECHO works!
 
      :
 
    else
 
      # Restart under the correct shell, and then maybe \$ECHO will work.
 
      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
 
    fi
 
  fi\
 
"
 
        $ECHO "\
 
 
 
  # Find the directory that this script lives in.
 
  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
 
  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
 
 
  # Follow symbolic links until we get to the real thisdir.
 
  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
 
  while test -n \"\$file\"; do
 
    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
 
 
    # If there was a directory component, then change thisdir.
 
    if test \"x\$destdir\" != \"x\$file\"; then
 
      case \"\$destdir\" in
 
      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
 
      *) thisdir=\"\$thisdir/\$destdir\" ;;
 
      esac
 
    fi
 
 
 
    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
 
    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
 
  done
 
"
 
}
 
# end: func_emit_wrapper_part1
 
 
 
# func_emit_wrapper_part2 [arg=no]
 
#
 
# Emit the second part of a libtool wrapper script on stdout.
 
# For more information, see the description associated with
 
# func_emit_wrapper(), below.
 
func_emit_wrapper_part2 ()
 
{
 
        func_emit_wrapper_part2_arg1=no
 
        if test -n "$1" ; then
 
          func_emit_wrapper_part2_arg1=$1
 
        fi
 
 
 
        $ECHO "\
 
 
 
  # Usually 'no', except on cygwin/mingw when embedded into
 
  # the cwrapper.
 
  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
 
  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
 
    # special case for '.'
 
    if test \"\$thisdir\" = \".\"; then
 
      thisdir=\`pwd\`
 
    fi
 
    # remove .libs from thisdir
 
    case \"\$thisdir\" in
 
    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
 
    $objdir )   thisdir=. ;;
 
    esac
 
  fi
 
 
 
  # Try to get the absolute directory name.
 
  absdir=\`cd \"\$thisdir\" && pwd\`
 
  test -n \"\$absdir\" && thisdir=\"\$absdir\"
 
"
 
 
 
        if test "$fast_install" = yes; then
 
          $ECHO "\
 
  program=lt-'$outputname'$exeext
 
  progdir=\"\$thisdir/$objdir\"
 
 
 
  if test ! -f \"\$progdir/\$program\" ||
 
     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
 
       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
 
 
    file=\"\$\$-\$program\"
 
 
 
    if test ! -d \"\$progdir\"; then
 
      $MKDIR \"\$progdir\"
 
    else
 
      $RM \"\$progdir/\$file\"
 
    fi"
 
 
 
          $ECHO "\
 
 
 
    # relink executable if necessary
 
    if test -n \"\$relink_command\"; then
 
      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
 
      else
 
        $ECHO \"\$relink_command_output\" >&2
 
        $RM \"\$progdir/\$file\"
 
        exit 1
 
      fi
 
    fi
 
 
 
    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
 
    { $RM \"\$progdir/\$program\";
 
      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
 
    $RM \"\$progdir/\$file\"
 
  fi"
 
        else
 
          $ECHO "\
 
  program='$outputname'
 
  progdir=\"\$thisdir/$objdir\"
 
"
 
        fi
 
 
 
        $ECHO "\
 
 
 
  if test -f \"\$progdir/\$program\"; then"
 
 
 
        # Export our shlibpath_var if we have one.
 
        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 
          $ECHO "\
 
    # Add our own library path to $shlibpath_var
 
    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
 
 
 
    # Some systems cannot cope with colon-terminated $shlibpath_var
 
    # The second colon is a workaround for a bug in BeOS R4 sed
 
    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
 
 
 
    export $shlibpath_var
 
"
 
        fi
 
 
 
        # fixup the dll searchpath if we need to.
 
        if test -n "$dllsearchpath"; then
 
          $ECHO "\
 
    # Add the dll search path components to the executable PATH
 
    PATH=$dllsearchpath:\$PATH
 
"
 
        fi
 
 
 
        $ECHO "\
 
    if test \"\$libtool_execute_magic\" != \"$magic\"; then
 
      # Run the actual program with our arguments.
 
"
 
        case $host in
 
        # Backslashes separate directories on plain windows
 
        *-*-mingw | *-*-os2* | *-cegcc*)
 
          $ECHO "\
 
      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 
"
 
          ;;
 
 
 
        *)
 
          $ECHO "\
 
      exec \"\$progdir/\$program\" \${1+\"\$@\"}
 
"
 
          ;;
 
        esac
 
        $ECHO "\
 
      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
 
      exit 1
 
    fi
 
  else
 
    # The program doesn't exist.
 
    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
 
    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
 
    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
 
    exit 1
 
  fi
 
fi\
 
"
 
}
 
# end: func_emit_wrapper_part2
 
 
 
 
 
# func_emit_wrapper [arg=no]
 
#
 
# Emit a libtool wrapper script on stdout.
 
# Don't directly open a file because we may want to
 
# incorporate the script contents within a cygwin/mingw
 
# wrapper executable.  Must ONLY be called from within
 
# func_mode_link because it depends on a number of variables
 
# set therein.
 
#
 
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
 
# variable will take.  If 'yes', then the emitted script
 
# will assume that the directory in which it is stored is
 
# the $objdir directory.  This is a cygwin/mingw-specific
 
# behavior.
 
func_emit_wrapper ()
 
{
 
        func_emit_wrapper_arg1=no
 
        if test -n "$1" ; then
 
          func_emit_wrapper_arg1=$1
 
        fi
 
 
 
        # split this up so that func_emit_cwrapperexe_src
 
        # can call each part independently.
 
        func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
 
        func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
 
}
 
 
 
 
 
# func_to_host_path arg
 
#
 
# Convert paths to host format when used with build tools.
 
# Intended for use with "native" mingw (where libtool itself
 
# is running under the msys shell), or in the following cross-
 
# build environments:
 
#    $build          $host
 
#    mingw (msys)    mingw  [e.g. native]
 
#    cygwin          mingw
 
#    *nix + wine     mingw
 
# where wine is equipped with the `winepath' executable.
 
# In the native mingw case, the (msys) shell automatically
 
# converts paths for any non-msys applications it launches,
 
# but that facility isn't available from inside the cwrapper.
 
# Similar accommodations are necessary for $host mingw and
 
# $build cygwin.  Calling this function does no harm for other
 
# $host/$build combinations not listed above.
 
#
 
# ARG is the path (on $build) that should be converted to
 
# the proper representation for $host. The result is stored
 
# in $func_to_host_path_result.
 
func_to_host_path ()
 
{
 
  func_to_host_path_result="$1"
 
  if test -n "$1" ; then
 
    case $host in
 
      *mingw* )
 
        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
 
        case $build in
 
          *mingw* ) # actually, msys
 
            # awkward: cmd appends spaces to result
 
            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
 
            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
 
              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
 
            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
 
              $SED -e "$lt_sed_naive_backslashify"`
 
            ;;
 
          *cygwin* )
 
            func_to_host_path_tmp1=`cygpath -w "$1"`
 
            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
 
              $SED -e "$lt_sed_naive_backslashify"`
 
            ;;
 
          * )
 
            # Unfortunately, winepath does not exit with a non-zero
 
            # error code, so we are forced to check the contents of
 
            # stdout. On the other hand, if the command is not
 
            # found, the shell will set an exit code of 127 and print
 
            # *an error message* to stdout. So we must check for both
 
            # error code of zero AND non-empty stdout, which explains
 
            # the odd construction:
 
            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
 
            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
 
              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
 
                $SED -e "$lt_sed_naive_backslashify"`
 
            else
 
              # Allow warning below.
 
              func_to_host_path_result=""
 
            fi
 
            ;;
 
        esac
 
        if test -z "$func_to_host_path_result" ; then
 
          func_error "Could not determine host path corresponding to"
 
          func_error "  '$1'"
 
          func_error "Continuing, but uninstalled executables may not work."
 
          # Fallback:
 
          func_to_host_path_result="$1"
 
        fi
 
        ;;
 
    esac
 
  fi
 
}
 
# end: func_to_host_path
 
 
 
# func_to_host_pathlist arg
 
#
 
# Convert pathlists to host format when used with build tools.
 
# See func_to_host_path(), above. This function supports the
 
# following $build/$host combinations (but does no harm for
 
# combinations not listed here):
 
#    $build          $host
 
#    mingw (msys)    mingw  [e.g. native]
 
#    cygwin          mingw
 
#    *nix + wine     mingw
 
#
 
# Path separators are also converted from $build format to
 
# $host format. If ARG begins or ends with a path separator
 
# character, it is preserved (but converted to $host format)
 
# on output.
 
#
 
# ARG is a pathlist (on $build) that should be converted to
 
# the proper representation on $host. The result is stored
 
# in $func_to_host_pathlist_result.
 
func_to_host_pathlist ()
 
{
 
  func_to_host_pathlist_result="$1"
 
  if test -n "$1" ; then
 
    case $host in
 
      *mingw* )
 
        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
 
        # Remove leading and trailing path separator characters from
 
        # ARG. msys behavior is inconsistent here, cygpath turns them
 
        # into '.;' and ';.', and winepath ignores them completely.
 
        func_to_host_pathlist_tmp2="$1"
 
        # Once set for this call, this variable should not be
 
        # reassigned. It is used in tha fallback case.
 
        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
 
          $SED -e 's|^:*||' -e 's|:*$||'`
 
        case $build in
 
          *mingw* ) # Actually, msys.
 
            # Awkward: cmd appends spaces to result.
 
            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
 
            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
 
              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
 
            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
 
              $SED -e "$lt_sed_naive_backslashify"`
 
            ;;
 
          *cygwin* )
 
            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
 
            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
 
              $SED -e "$lt_sed_naive_backslashify"`
 
            ;;
 
          * )
 
            # unfortunately, winepath doesn't convert pathlists
 
            func_to_host_pathlist_result=""
 
            func_to_host_pathlist_oldIFS=$IFS
 
            IFS=:
 
            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
 
              IFS=$func_to_host_pathlist_oldIFS
 
              if test -n "$func_to_host_pathlist_f" ; then
 
                func_to_host_path "$func_to_host_pathlist_f"
 
                if test -n "$func_to_host_path_result" ; then
 
                  if test -z "$func_to_host_pathlist_result" ; then
 
                    func_to_host_pathlist_result="$func_to_host_path_result"
 
                  else
 
                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
 
                  fi
 
                fi
 
              fi
 
              IFS=:
 
            done
 
            IFS=$func_to_host_pathlist_oldIFS
 
            ;;
 
        esac
 
        if test -z "$func_to_host_pathlist_result" ; then
 
          func_error "Could not determine the host path(s) corresponding to"
 
          func_error "  '$1'"
 
          func_error "Continuing, but uninstalled executables may not work."
 
          # Fallback. This may break if $1 contains DOS-style drive
 
          # specifications. The fix is not to complicate the expression
 
          # below, but for the user to provide a working wine installation
 
          # with winepath so that path translation in the cross-to-mingw
 
          # case works properly.
 
          lt_replace_pathsep_nix_to_dos="s|:|;|g"
 
          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
 
            $SED -e "$lt_replace_pathsep_nix_to_dos"`
 
        fi
 
        # Now, add the leading and trailing path separators back
 
        case "$1" in
 
          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
 
            ;;
 
        esac
 
        case "$1" in
 
          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
 
            ;;
 
        esac
 
        ;;
 
    esac
 
  fi
 
}
 
# end: func_to_host_pathlist
 
 
 
# func_emit_cwrapperexe_src
 
# emit the source code for a wrapper executable on stdout
 
# Must ONLY be called from within func_mode_link because
 
# it depends on a number of variable set therein.
 
func_emit_cwrapperexe_src ()
 
{
 
        cat <<EOF
 
 
 
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
 
   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
 
 
   The $output program cannot be directly executed until all the libtool
 
   libraries that it depends on are installed.
 
 
 
   This wrapper executable should never be moved out of the build directory.
 
   If it is, it will not operate correctly.
 
 
 
   Currently, it simply execs the wrapper *script* "$SHELL $output",
 
   but could eventually absorb all of the scripts functionality and
 
   exec $objdir/$outputname directly.
 
*/
 
EOF
 
            cat <<"EOF"
 
#include <stdio.h>
 
#include <stdlib.h>
 
#ifdef _MSC_VER
 
# include <direct.h>
 
# include <process.h>
 
# include <io.h>
 
# define setmode _setmode
 
#else
 
# include <unistd.h>
 
# include <stdint.h>
 
# ifdef __CYGWIN__
 
#  include <io.h>
 
#  define HAVE_SETENV
 
#  ifdef __STRICT_ANSI__
 
char *realpath (const char *, char *);
 
int putenv (char *);
 
int setenv (const char *, const char *, int);
 
#  endif
 
# endif
 
#endif
 
#include <malloc.h>
 
#include <stdarg.h>
 
#include <assert.h>
 
#include <string.h>
 
#include <ctype.h>
 
#include <errno.h>
 
#include <fcntl.h>
 
#include <sys/stat.h>
 
 
 
#if defined(PATH_MAX)
 
# define LT_PATHMAX PATH_MAX
 
#elif defined(MAXPATHLEN)
 
# define LT_PATHMAX MAXPATHLEN
 
#else
 
# define LT_PATHMAX 1024
 
#endif
 
 
 
#ifndef S_IXOTH
 
# define S_IXOTH 0
 
#endif
 
#ifndef S_IXGRP
 
# define S_IXGRP 0
 
#endif
 
 
 
#ifdef _MSC_VER
 
# define S_IXUSR _S_IEXEC
 
# define stat _stat
 
# ifndef _INTPTR_T_DEFINED
 
#  define intptr_t int
 
# endif
 
#endif
 
 
 
#ifndef DIR_SEPARATOR
 
# define DIR_SEPARATOR '/'
 
# define PATH_SEPARATOR ':'
 
#endif
 
 
 
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
 
  defined (__OS2__)
 
# define HAVE_DOS_BASED_FILE_SYSTEM
 
# define FOPEN_WB "wb"
 
# ifndef DIR_SEPARATOR_2
 
#  define DIR_SEPARATOR_2 '\\'
 
# endif
 
# ifndef PATH_SEPARATOR_2
 
#  define PATH_SEPARATOR_2 ';'
 
# endif
 
#endif
 
 
 
#ifndef DIR_SEPARATOR_2
 
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
 
#else /* DIR_SEPARATOR_2 */
 
# define IS_DIR_SEPARATOR(ch) \
 
        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
 
#endif /* DIR_SEPARATOR_2 */
 
 
 
#ifndef PATH_SEPARATOR_2
 
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
 
#else /* PATH_SEPARATOR_2 */
 
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 
#endif /* PATH_SEPARATOR_2 */
 
 
 
#ifdef __CYGWIN__
 
# define FOPEN_WB "wb"
 
#endif
 
 
 
#ifndef FOPEN_WB
 
# define FOPEN_WB "w"
 
#endif
 
#ifndef _O_BINARY
 
# define _O_BINARY 0
 
#endif
 
 
 
#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 
#define XFREE(stale) do { \
 
  if (stale) { free ((void *) stale); stale = 0; } \
 
} while (0)
 
 
 
#undef LTWRAPPER_DEBUGPRINTF
 
#if defined DEBUGWRAPPER
 
# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
 
static void
 
ltwrapper_debugprintf (const char *fmt, ...)
 
{
 
    va_list args;
 
    va_start (args, fmt);
 
    (void) vfprintf (stderr, fmt, args);
 
    va_end (args);
 
}
 
#else
 
# define LTWRAPPER_DEBUGPRINTF(args)
 
#endif
 
 
 
const char *program_name = NULL;
 
 
 
void *xmalloc (size_t num);
 
char *xstrdup (const char *string);
 
const char *base_name (const char *name);
 
char *find_executable (const char *wrapper);
 
char *chase_symlinks (const char *pathspec);
 
int make_executable (const char *path);
 
int check_executable (const char *path);
 
char *strendzap (char *str, const char *pat);
 
void lt_fatal (const char *message, ...);
 
void lt_setenv (const char *name, const char *value);
 
char *lt_extend_str (const char *orig_value, const char *add, int to_end);
 
void lt_opt_process_env_set (const char *arg);
 
void lt_opt_process_env_prepend (const char *arg);
 
void lt_opt_process_env_append (const char *arg);
 
int lt_split_name_value (const char *arg, char** name, char** value);
 
void lt_update_exe_path (const char *name, const char *value);
 
void lt_update_lib_path (const char *name, const char *value);
 
 
 
static const char *script_text_part1 =
 
EOF
 
 
 
            func_emit_wrapper_part1 yes |
 
                $SED -e 's/\([\\"]\)/\\\1/g' \
 
                     -e 's/^/  "/' -e 's/$/\\n"/'
 
            echo ";"
 
            cat <<EOF
 
 
 
static const char *script_text_part2 =
 
EOF
 
            func_emit_wrapper_part2 yes |
 
                $SED -e 's/\([\\"]\)/\\\1/g' \
 
                     -e 's/^/  "/' -e 's/$/\\n"/'
 
            echo ";"
 
 
 
            cat <<EOF
 
const char * MAGIC_EXE = "$magic_exe";
 
const char * LIB_PATH_VARNAME = "$shlibpath_var";
 
EOF
 
 
 
            if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 
              func_to_host_pathlist "$temp_rpath"
 
              cat <<EOF
 
const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
 
EOF
 
            else
 
              cat <<"EOF"
 
const char * LIB_PATH_VALUE   = "";
 
EOF
 
            fi
 
 
 
            if test -n "$dllsearchpath"; then
 
              func_to_host_pathlist "$dllsearchpath:"
 
              cat <<EOF
 
const char * EXE_PATH_VARNAME = "PATH";
 
const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
 
EOF
 
            else
 
              cat <<"EOF"
 
const char * EXE_PATH_VARNAME = "";
 
const char * EXE_PATH_VALUE   = "";
 
EOF
 
            fi
 
 
 
            if test "$fast_install" = yes; then
 
              cat <<EOF
 
const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
 
EOF
 
            else
 
              cat <<EOF
 
const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
 
EOF
 
            fi
 
 
 
 
 
            cat <<"EOF"
 
 
 
#define LTWRAPPER_OPTION_PREFIX         "--lt-"
 
#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
 
 
static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
 
static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
 
 
 
static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
 
 
 
static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
 
static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
 
  /* argument is putenv-style "foo=bar", value of foo is set to bar */
 
 
 
static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
 
static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
 
  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
 
 
 
static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
 
static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
 
  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
 
 
 
int
 
main (int argc, char *argv[])
 
{
 
  char **newargz;
 
  int  newargc;
 
  char *tmp_pathspec;
 
  char *actual_cwrapper_path;
 
  char *actual_cwrapper_name;
 
  char *target_name;
 
  char *lt_argv_zero;
 
  intptr_t rval = 127;
 
 
 
  int i;
 
 
 
  program_name = (char *) xstrdup (base_name (argv[0]));
 
  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
 
  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
 
 
 
  /* very simple arg parsing; don't want to rely on getopt */
 
  for (i = 1; i < argc; i++)
 
    {
 
      if (strcmp (argv[i], dumpscript_opt) == 0)
 
        {
 
EOF
 
            case "$host" in
 
              *mingw* | *cygwin* )
 
                # make stdout use "unix" line endings
 
                echo "          setmode(1,_O_BINARY);"
 
                ;;
 
              esac
 
 
 
            cat <<"EOF"
 
          printf ("%s", script_text_part1);
 
          printf ("%s", script_text_part2);
 
          return 0;
 
        }
 
    }
 
 
 
  newargz = XMALLOC (char *, argc + 1);
 
  tmp_pathspec = find_executable (argv[0]);
 
  if (tmp_pathspec == NULL)
 
    lt_fatal ("Couldn't find %s", argv[0]);
 
  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
 
                          tmp_pathspec));
 
 
 
  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
 
  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
 
                          actual_cwrapper_path));
 
  XFREE (tmp_pathspec);
 
 
 
  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
 
  strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
 
 
  /* wrapper name transforms */
 
  strendzap (actual_cwrapper_name, ".exe");
 
  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
 
  XFREE (actual_cwrapper_name);
 
  actual_cwrapper_name = tmp_pathspec;
 
  tmp_pathspec = 0;
 
 
 
  /* target_name transforms -- use actual target program name; might have lt- prefix */
 
  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
 
  strendzap (target_name, ".exe");
 
  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
 
  XFREE (target_name);
 
  target_name = tmp_pathspec;
 
  tmp_pathspec = 0;
 
 
 
  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
 
                          target_name));
 
EOF
 
 
 
            cat <<EOF
 
  newargz[0] =
 
    XMALLOC (char, (strlen (actual_cwrapper_path) +
 
                    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
 
  strcpy (newargz[0], actual_cwrapper_path);
 
  strcat (newargz[0], "$objdir");
 
  strcat (newargz[0], "/");
 
EOF
 
 
 
            cat <<"EOF"
 
  /* stop here, and copy so we don't have to do this twice */
 
  tmp_pathspec = xstrdup (newargz[0]);
 
 
 
  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
 
  strcat (newargz[0], actual_cwrapper_name);
 
 
 
  /* DO want the lt- prefix here if it exists, so use target_name */
 
  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
 
  XFREE (tmp_pathspec);
 
  tmp_pathspec = NULL;
 
EOF
 
 
 
            case $host_os in
 
              mingw*)
 
            cat <<"EOF"
 
  {
 
    char* p;
 
    while ((p = strchr (newargz[0], '\\')) != NULL)
 
      {
 
        *p = '/';
 
      }
 
    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
 
      {
 
        *p = '/';
 
      }
 
  }
 
EOF
 
            ;;
 
            esac
 
 
 
            cat <<"EOF"
 
  XFREE (target_name);
 
  XFREE (actual_cwrapper_path);
 
  XFREE (actual_cwrapper_name);
 
 
 
  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
 
  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
 
  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
 
  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
 
 
 
  newargc=0;
 
  for (i = 1; i < argc; i++)
 
    {
 
      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
 
        {
 
          if (argv[i][env_set_opt_len] == '=')
 
            {
 
              const char *p = argv[i] + env_set_opt_len + 1;
 
              lt_opt_process_env_set (p);
 
            }
 
          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
 
            {
 
              lt_opt_process_env_set (argv[++i]); /* don't copy */
 
            }
 
          else
 
            lt_fatal ("%s missing required argument", env_set_opt);
 
          continue;
 
        }
 
      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
 
        {
 
          if (argv[i][env_prepend_opt_len] == '=')
 
            {
 
              const char *p = argv[i] + env_prepend_opt_len + 1;
 
              lt_opt_process_env_prepend (p);
 
            }
 
          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
 
            {
 
              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
 
            }
 
          else
 
            lt_fatal ("%s missing required argument", env_prepend_opt);
 
          continue;
 
        }
 
      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
 
        {
 
          if (argv[i][env_append_opt_len] == '=')
 
            {
 
              const char *p = argv[i] + env_append_opt_len + 1;
 
              lt_opt_process_env_append (p);
 
            }
 
          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
 
            {
 
              lt_opt_process_env_append (argv[++i]); /* don't copy */
 
            }
 
          else
 
            lt_fatal ("%s missing required argument", env_append_opt);
 
          continue;
 
        }
 
      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
 
        {
 
          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
 
             namespace, but it is not one of the ones we know about and
 
             have already dealt with, above (inluding dump-script), then
 
             report an error. Otherwise, targets might begin to believe
 
             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
 
             namespace. The first time any user complains about this, we'll
 
             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
 
             or a configure.ac-settable value.
 
           */
 
          lt_fatal ("Unrecognized option in %s namespace: '%s'",
 
                    ltwrapper_option_prefix, argv[i]);
 
        }
 
      /* otherwise ... */
 
      newargz[++newargc] = xstrdup (argv[i]);
 
    }
 
  newargz[++newargc] = NULL;
 
 
 
  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
 
  for (i = 0; i < newargc; i++)
 
    {
 
      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
 
    }
 
 
 
EOF
 
 
 
            case $host_os in
 
              mingw*)
 
                cat <<"EOF"
 
  /* execv doesn't actually work on mingw as expected on unix */
 
  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
 
  if (rval == -1)
 
    {
 
      /* failed to start process */
 
      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
 
      return 127;
 
    }
 
  return rval;
 
EOF
 
                ;;
 
              *)
 
                cat <<"EOF"
 
  execv (lt_argv_zero, newargz);
 
  return rval; /* =127, but avoids unused variable warning */
 
EOF
 
                ;;
 
            esac
 
 
 
            cat <<"EOF"
 
}
 
 
 
void *
 
xmalloc (size_t num)
 
{
 
  void *p = (void *) malloc (num);
 
  if (!p)
 
    lt_fatal ("Memory exhausted");
 
 
 
  return p;
 
}
 
 
 
char *
 
xstrdup (const char *string)
 
{
 
  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
 
                          string) : NULL;
 
}
 
 
 
const char *
 
base_name (const char *name)
 
{
 
  const char *base;
 
 
 
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
 
  /* Skip over the disk name in MSDOS pathnames. */
 
  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
 
    name += 2;
 
#endif
 
 
 
  for (base = name; *name; name++)
 
    if (IS_DIR_SEPARATOR (*name))
 
      base = name + 1;
 
  return base;
 
}
 
 
 
int
 
check_executable (const char *path)
 
{
 
  struct stat st;
 
 
 
  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
 
                          path ? (*path ? path : "EMPTY!") : "NULL!"));
 
  if ((!path) || (!*path))
 
    return 0;
 
 
 
  if ((stat (path, &st) >= 0)
 
      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
 
    return 1;
 
  else
 
    return 0;
 
}
 
 
 
int
 
make_executable (const char *path)
 
{
 
  int rval = 0;
 
  struct stat st;
 
 
 
  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
 
                          path ? (*path ? path : "EMPTY!") : "NULL!"));
 
  if ((!path) || (!*path))
 
    return 0;
 
 
 
  if (stat (path, &st) >= 0)
 
    {
 
      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
 
    }
 
  return rval;
 
}
 
 
 
/* Searches for the full path of the wrapper.  Returns
 
   newly allocated full path name if found, NULL otherwise
 
   Does not chase symlinks, even on platforms that support them.
 
*/
 
char *
 
find_executable (const char *wrapper)
 
{
 
  int has_slash = 0;
 
  const char *p;
 
  const char *p_next;
 
  /* static buffer for getcwd */
 
  char tmp[LT_PATHMAX + 1];
 
  int tmp_len;
 
  char *concat_name;
 
 
 
  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
 
                          wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
 
 
 
  if ((wrapper == NULL) || (*wrapper == '\0'))
 
    return NULL;
 
 
 
  /* Absolute path? */
 
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
 
  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
 
    {
 
      concat_name = xstrdup (wrapper);
 
      if (check_executable (concat_name))
 
        return concat_name;
 
      XFREE (concat_name);
 
    }
 
  else
 
    {
 
#endif
 
      if (IS_DIR_SEPARATOR (wrapper[0]))
 
        {
 
          concat_name = xstrdup (wrapper);
 
          if (check_executable (concat_name))
 
            return concat_name;
 
          XFREE (concat_name);
 
        }
 
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
 
    }
 
#endif
 
 
 
  for (p = wrapper; *p; p++)
 
    if (*p == '/')
 
      {
 
        has_slash = 1;
 
        break;
 
      }
 
  if (!has_slash)
 
    {
 
      /* no slashes; search PATH */
 
      const char *path = getenv ("PATH");
 
      if (path != NULL)
 
        {
 
          for (p = path; *p; p = p_next)
 
            {
 
              const char *q;
 
              size_t p_len;
 
              for (q = p; *q; q++)
 
                if (IS_PATH_SEPARATOR (*q))
 
                  break;
 
              p_len = q - p;
 
              p_next = (*q == '\0' ? q : q + 1);
 
              if (p_len == 0)
 
                {
 
                  /* empty path: current directory */
 
                  if (getcwd (tmp, LT_PATHMAX) == NULL)
 
                    lt_fatal ("getcwd failed");
 
                  tmp_len = strlen (tmp);
 
                  concat_name =
 
                    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
 
                  memcpy (concat_name, tmp, tmp_len);
 
                  concat_name[tmp_len] = '/';
 
                  strcpy (concat_name + tmp_len + 1, wrapper);
 
                }
 
              else
 
                {
 
                  concat_name =
 
                    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
 
                  memcpy (concat_name, p, p_len);
 
                  concat_name[p_len] = '/';
 
                  strcpy (concat_name + p_len + 1, wrapper);
 
                }
 
              if (check_executable (concat_name))
 
                return concat_name;
 
              XFREE (concat_name);
 
            }
 
        }
 
      /* not found in PATH; assume curdir */
 
    }
 
  /* Relative path | not found in path: prepend cwd */
 
  if (getcwd (tmp, LT_PATHMAX) == NULL)
 
    lt_fatal ("getcwd failed");
 
  tmp_len = strlen (tmp);
 
  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
 
  memcpy (concat_name, tmp, tmp_len);
 
  concat_name[tmp_len] = '/';
 
  strcpy (concat_name + tmp_len + 1, wrapper);
 
 
 
  if (check_executable (concat_name))
 
    return concat_name;
 
  XFREE (concat_name);
 
  return NULL;
 
}
 
 
 
char *
 
chase_symlinks (const char *pathspec)
 
{
 
#ifndef S_ISLNK
 
  return xstrdup (pathspec);
 
#else
 
  char buf[LT_PATHMAX];
 
  struct stat s;
 
  char *tmp_pathspec = xstrdup (pathspec);
 
  char *p;
 
  int has_symlinks = 0;
 
  while (strlen (tmp_pathspec) && !has_symlinks)
 
    {
 
      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
 
                              tmp_pathspec));
 
      if (lstat (tmp_pathspec, &s) == 0)
 
        {
 
          if (S_ISLNK (s.st_mode) != 0)
 
            {
 
              has_symlinks = 1;
 
              break;
 
            }
 
 
 
          /* search backwards for last DIR_SEPARATOR */
 
          p = tmp_pathspec + strlen (tmp_pathspec) - 1;
 
          while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
 
            p--;
 
          if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
 
            {
 
              /* no more DIR_SEPARATORS left */
 
              break;
 
            }
 
          *p = '\0';
 
        }
 
      else
 
        {
 
          char *errstr = strerror (errno);
 
          lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
 
        }
 
    }
 
  XFREE (tmp_pathspec);
 
 
 
  if (!has_symlinks)
 
    {
 
      return xstrdup (pathspec);
 
    }
 
 
 
  tmp_pathspec = realpath (pathspec, buf);
 
  if (tmp_pathspec == 0)
 
    {
 
      lt_fatal ("Could not follow symlinks for %s", pathspec);
 
    }
 
  return xstrdup (tmp_pathspec);
 
#endif
 
}
 
 
 
char *
 
strendzap (char *str, const char *pat)
 
{
 
  size_t len, patlen;
 
 
 
  assert (str != NULL);
 
  assert (pat != NULL);
 
 
 
  len = strlen (str);
 
  patlen = strlen (pat);
 
 
 
  if (patlen <= len)
 
    {
 
      str += len - patlen;
 
      if (strcmp (str, pat) == 0)
 
        *str = '\0';
 
    }
 
  return str;
 
}
 
 
 
static void
 
lt_error_core (int exit_status, const char *mode,
 
               const char *message, va_list ap)
 
{
 
  fprintf (stderr, "%s: %s: ", program_name, mode);
 
  vfprintf (stderr, message, ap);
 
  fprintf (stderr, ".\n");
 
 
 
  if (exit_status >= 0)
 
    exit (exit_status);
 
}
 
 
 
void
 
lt_fatal (const char *message, ...)
 
{
 
  va_list ap;
 
  va_start (ap, message);
 
  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
 
  va_end (ap);
 
}
 
 
 
void
 
lt_setenv (const char *name, const char *value)
 
{
 
  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
 
                          (name ? name : "<NULL>"),
 
                          (value ? value : "<NULL>")));
 
  {
 
#ifdef HAVE_SETENV
 
    /* always make a copy, for consistency with !HAVE_SETENV */
 
    char *str = xstrdup (value);
 
    setenv (name, str, 1);
 
#else
 
    int len = strlen (name) + 1 + strlen (value) + 1;
 
    char *str = XMALLOC (char, len);
 
    sprintf (str, "%s=%s", name, value);
 
    if (putenv (str) != EXIT_SUCCESS)
 
      {
 
        XFREE (str);
 
      }
 
#endif
 
  }
 
}
 
 
 
char *
 
lt_extend_str (const char *orig_value, const char *add, int to_end)
 
{
 
  char *new_value;
 
  if (orig_value && *orig_value)
 
    {
 
      int orig_value_len = strlen (orig_value);
 
      int add_len = strlen (add);
 
      new_value = XMALLOC (char, add_len + orig_value_len + 1);
 
      if (to_end)
 
        {
 
          strcpy (new_value, orig_value);
 
          strcpy (new_value + orig_value_len, add);
 
        }
 
      else
 
        {
 
          strcpy (new_value, add);
 
          strcpy (new_value + add_len, orig_value);
 
        }
 
    }
 
  else
 
    {
 
      new_value = xstrdup (add);
 
    }
 
  return new_value;
 
}
 
 
 
int
 
lt_split_name_value (const char *arg, char** name, char** value)
 
{
 
  const char *p;
 
  int len;
 
  if (!arg || !*arg)
 
    return 1;
 
 
 
  p = strchr (arg, (int)'=');
 
 
 
  if (!p)
 
    return 1;
 
 
 
  *value = xstrdup (++p);
 
 
 
  len = strlen (arg) - strlen (*value);
 
  *name = XMALLOC (char, len);
 
  strncpy (*name, arg, len-1);
 
  (*name)[len - 1] = '\0';
 
 
 
  return 0;
 
}
 
 
 
void
 
lt_opt_process_env_set (const char *arg)
 
{
 
  char *name = NULL;
 
  char *value = NULL;
 
 
 
  if (lt_split_name_value (arg, &name, &value) != 0)
 
    {
 
      XFREE (name);
 
      XFREE (value);
 
      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
 
    }
 
 
 
  lt_setenv (name, value);
 
  XFREE (name);
 
  XFREE (value);
 
}
 
 
 
void
 
lt_opt_process_env_prepend (const char *arg)
 
{
 
  char *name = NULL;
 
  char *value = NULL;
 
  char *new_value = NULL;
 
 
 
  if (lt_split_name_value (arg, &name, &value) != 0)
 
    {
 
      XFREE (name);
 
      XFREE (value);
 
      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
 
    }
 
 
 
  new_value = lt_extend_str (getenv (name), value, 0);
 
  lt_setenv (name, new_value);
 
  XFREE (new_value);
 
  XFREE (name);
 
  XFREE (value);
 
}
 
 
 
void
 
lt_opt_process_env_append (const char *arg)
 
{
 
  char *name = NULL;
 
  char *value = NULL;
 
  char *new_value = NULL;
 
 
 
  if (lt_split_name_value (arg, &name, &value) != 0)
 
    {
 
      XFREE (name);
 
      XFREE (value);
 
      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
 
    }
 
 
 
  new_value = lt_extend_str (getenv (name), value, 1);
 
  lt_setenv (name, new_value);
 
  XFREE (new_value);
 
  XFREE (name);
 
  XFREE (value);
 
}
 
 
 
void
 
lt_update_exe_path (const char *name, const char *value)
 
{
 
  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
 
                          (name ? name : "<NULL>"),
 
                          (value ? value : "<NULL>")));
 
 
 
  if (name && *name && value && *value)
 
    {
 
      char *new_value = lt_extend_str (getenv (name), value, 0);
 
      /* some systems can't cope with a ':'-terminated path #' */
 
      int len = strlen (new_value);
 
      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
 
        {
 
          new_value[len-1] = '\0';
 
        }
 
      lt_setenv (name, new_value);
 
      XFREE (new_value);
 
    }
 
}
 
 
 
void
 
lt_update_lib_path (const char *name, const char *value)
 
{
 
  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
 
                          (name ? name : "<NULL>"),
 
                          (value ? value : "<NULL>")));
 
 
 
  if (name && *name && value && *value)
 
    {
 
      char *new_value = lt_extend_str (getenv (name), value, 0);
 
      lt_setenv (name, new_value);
 
      XFREE (new_value);
 
    }
 
}
 
 
 
 
 
EOF
 
}
 
# end: func_emit_cwrapperexe_src
 
 
 
# func_mode_link arg...
 
func_mode_link ()
 
{
 
    $opt_debug
 
    case $host in
 
    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 
      # It is impossible to link a dll without this setting, and
 
      # we shouldn't force the makefile maintainer to figure out
 
      # which system we are compiling for in order to pass an extra
 
      # flag for every libtool invocation.
 
      # allow_undefined=no
 
 
 
      # FIXME: Unfortunately, there are problems with the above when trying
 
      # to make a dll which has undefined symbols, in which case not
 
      # even a static library is built.  For now, we need to specify
 
      # -no-undefined on the libtool link line when we can be certain
 
      # that all symbols are satisfied, otherwise we get a static library.
 
      allow_undefined=yes
 
      ;;
 
    *)
 
      allow_undefined=yes
 
      ;;
 
    esac
 
    libtool_args=$nonopt
 
    base_compile="$nonopt $@"
 
    compile_command=$nonopt
 
    finalize_command=$nonopt
 
 
 
    compile_rpath=
 
    finalize_rpath=
 
    compile_shlibpath=
 
    finalize_shlibpath=
 
    convenience=
 
    old_convenience=
 
    deplibs=
 
    old_deplibs=
 
    compiler_flags=
 
    linker_flags=
 
    dllsearchpath=
 
    lib_search_path=`pwd`
 
    inst_prefix_dir=
 
    new_inherited_linker_flags=
 
 
 
    avoid_version=no
 
    dlfiles=
 
    dlprefiles=
 
    dlself=no
 
    export_dynamic=no
 
    export_symbols=
 
    export_symbols_regex=
 
    generated=
 
    libobjs=
 
    ltlibs=
 
    module=no
 
    no_install=no
 
    objs=
 
    non_pic_objects=
 
    precious_files_regex=
 
    prefer_static_libs=no
 
    preload=no
 
    prev=
 
    prevarg=
 
    release=
 
    rpath=
 
    xrpath=
 
    perm_rpath=
 
    temp_rpath=
 
    thread_safe=no
 
    vinfo=
 
    vinfo_number=no
 
    weak_libs=
 
    single_module="${wl}-single_module"
 
    func_infer_tag $base_compile
 
 
 
    # We need to know -static, to get the right output filenames.
 
    for arg
 
    do
 
      case $arg in
 
      -shared)
 
        test "$build_libtool_libs" != yes && \
 
          func_fatal_configuration "can not build a shared library"
 
        build_old_libs=no
 
        break
 
        ;;
 
      -all-static | -static | -static-libtool-libs)
 
        case $arg in
 
        -all-static)
 
          if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
 
            func_warning "complete static linking is impossible in this configuration"
 
          fi
 
          if test -n "$link_static_flag"; then
 
            dlopen_self=$dlopen_self_static
 
          fi
 
          prefer_static_libs=yes
 
          ;;
 
        -static)
 
          if test -z "$pic_flag" && test -n "$link_static_flag"; then
 
            dlopen_self=$dlopen_self_static
 
          fi
 
          prefer_static_libs=built
 
          ;;
 
        -static-libtool-libs)
 
          if test -z "$pic_flag" && test -n "$link_static_flag"; then
 
            dlopen_self=$dlopen_self_static
 
          fi
 
          prefer_static_libs=yes
 
          ;;
 
        esac
 
        build_libtool_libs=no
 
        build_old_libs=yes
 
        break
 
        ;;
 
      esac
 
    done
 
 
 
    # See if our shared archives depend on static archives.
 
    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
 
 
 
    # Go through the arguments, transforming them on the way.
 
    while test "$#" -gt 0; do
 
      arg="$1"
 
      shift
 
      func_quote_for_eval "$arg"
 
      qarg=$func_quote_for_eval_unquoted_result
 
      func_append libtool_args " $func_quote_for_eval_result"
 
 
 
      # If the previous option needs an argument, assign it.
 
      if test -n "$prev"; then
 
        case $prev in
 
        output)
 
          func_append compile_command " @OUTPUT@"
 
          func_append finalize_command " @OUTPUT@"
 
          ;;
 
        esac
 
 
 
        case $prev in
 
        dlfiles|dlprefiles)
 
          if test "$preload" = no; then
 
            # Add the symbol object into the linking commands.
 
            func_append compile_command " @SYMFILE@"
 
            func_append finalize_command " @SYMFILE@"
 
            preload=yes
 
          fi
 
          case $arg in
 
          *.la | *.lo) ;;  # We handle these cases below.
 
          force)
 
            if test "$dlself" = no; then
 
              dlself=needless
 
              export_dynamic=yes
 
            fi
 
            prev=
 
            continue
 
            ;;
 
          self)
 
            if test "$prev" = dlprefiles; then
 
              dlself=yes
 
            elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
 
              dlself=yes
 
            else
 
              dlself=needless
 
              export_dynamic=yes
 
            fi
 
            prev=
 
            continue
 
            ;;
 
          *)
 
            if test "$prev" = dlfiles; then
 
              dlfiles="$dlfiles $arg"
 
            else
 
              dlprefiles="$dlprefiles $arg"
 
            fi
 
            prev=
 
            continue
 
            ;;
 
          esac
 
          ;;
 
        expsyms)
 
          export_symbols="$arg"
 
          test -f "$arg" \
 
            || func_fatal_error "symbol file \`$arg' does not exist"
 
          prev=
 
          continue
 
          ;;
 
        expsyms_regex)
 
          export_symbols_regex="$arg"
 
          prev=
 
          continue
 
          ;;
 
        framework)
 
          case $host in
 
            *-*-darwin*)
 
              case "$deplibs " in
 
                *" $qarg.ltframework "*) ;;
 
                *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
 
                   ;;
 
              esac
 
              ;;
 
          esac
 
          prev=
 
          continue
 
          ;;
 
        inst_prefix)
 
          inst_prefix_dir="$arg"
 
          prev=
 
          continue
 
          ;;
 
        objectlist)
 
          if test -f "$arg"; then
 
            save_arg=$arg
 
            moreargs=
 
            for fil in `cat "$save_arg"`
 
            do
 
#             moreargs="$moreargs $fil"
 
              arg=$fil
 
              # A libtool-controlled object.
 
 
 
              # Check to see that this really is a libtool object.
 
              if func_lalib_unsafe_p "$arg"; then
 
                pic_object=
 
                non_pic_object=
 
 
 
                # Read the .lo file
 
                func_source "$arg"
 
 
 
                if test -z "$pic_object" ||
 
                   test -z "$non_pic_object" ||
 
                   test "$pic_object" = none &&
 
                   test "$non_pic_object" = none; then
 
                  func_fatal_error "cannot find name of object for \`$arg'"
 
                fi
 
 
 
                # Extract subdirectory from the argument.
 
                func_dirname "$arg" "/" ""
 
                xdir="$func_dirname_result"
 
 
 
                if test "$pic_object" != none; then
 
                  # Prepend the subdirectory the object is found in.
 
                  pic_object="$xdir$pic_object"
 
 
 
                  if test "$prev" = dlfiles; then
 
                    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
 
                      dlfiles="$dlfiles $pic_object"
 
                      prev=
 
                      continue
 
                    else
 
                      # If libtool objects are unsupported, then we need to preload.
 
                      prev=dlprefiles
 
                    fi
 
                  fi
 
 
 
                  # CHECK ME:  I think I busted this.  -Ossama
 
                  if test "$prev" = dlprefiles; then
 
                    # Preload the old-style object.
 
                    dlprefiles="$dlprefiles $pic_object"
 
                    prev=
 
                  fi
 
 
 
                  # A PIC object.
 
                  func_append libobjs " $pic_object"
 
                  arg="$pic_object"
 
                fi
 
 
 
                # Non-PIC object.
 
                if test "$non_pic_object" != none; then
 
                  # Prepend the subdirectory the object is found in.
 
                  non_pic_object="$xdir$non_pic_object"
 
 
 
                  # A standard non-PIC object
 
                  func_append non_pic_objects " $non_pic_object"
 
                  if test -z "$pic_object" || test "$pic_object" = none ; then
 
                    arg="$non_pic_object"
 
                  fi
 
                else
 
                  # If the PIC object exists, use it instead.
 
                  # $xdir was prepended to $pic_object above.
 
                  non_pic_object="$pic_object"
 
                  func_append non_pic_objects " $non_pic_object"
 
                fi
 
              else
 
                # Only an error if not doing a dry-run.
 
                if $opt_dry_run; then
 
                  # Extract subdirectory from the argument.
 
                  func_dirname "$arg" "/" ""
 
                  xdir="$func_dirname_result"
 
 
 
                  func_lo2o "$arg"
 
                  pic_object=$xdir$objdir/$func_lo2o_result
 
                  non_pic_object=$xdir$func_lo2o_result
 
                  func_append libobjs " $pic_object"
 
                  func_append non_pic_objects " $non_pic_object"
 
                else
 
                  func_fatal_error "\`$arg' is not a valid libtool object"
 
                fi
 
              fi
 
            done
 
          else
 
            func_fatal_error "link input file \`$arg' does not exist"
 
          fi
 
          arg=$save_arg
 
          prev=
 
          continue
 
          ;;
 
        precious_regex)
 
          precious_files_regex="$arg"
 
          prev=
 
          continue
 
          ;;
 
        release)
 
          release="-$arg"
 
          prev=
 
          continue
 
          ;;
 
        rpath | xrpath)
 
          # We need an absolute path.
 
          case $arg in
 
          [\\/]* | [A-Za-z]:[\\/]*) ;;
 
          *)
 
            func_fatal_error "only absolute run-paths are allowed"
 
            ;;
 
          esac
 
          if test "$prev" = rpath; then
 
            case "$rpath " in
 
            *" $arg "*) ;;
 
            *) rpath="$rpath $arg" ;;
 
            esac
 
          else
 
            case "$xrpath " in
 
            *" $arg "*) ;;
 
            *) xrpath="$xrpath $arg" ;;
 
            esac
 
          fi
 
          prev=
 
          continue
 
          ;;
 
        shrext)
 
          shrext_cmds="$arg"
 
          prev=
 
          continue
 
          ;;
 
        weak)
 
          weak_libs="$weak_libs $arg"
 
          prev=
 
          continue
 
          ;;
 
        xcclinker)
 
          linker_flags="$linker_flags $qarg"
 
          compiler_flags="$compiler_flags $qarg"
 
          prev=
 
          func_append compile_command " $qarg"
 
          func_append finalize_command " $qarg"
 
          continue
 
          ;;
 
        xcompiler)
 
          compiler_flags="$compiler_flags $qarg"
 
          prev=
 
          func_append compile_command " $qarg"
 
          func_append finalize_command " $qarg"
 
          continue
 
          ;;
 
        xlinker)
 
          linker_flags="$linker_flags $qarg"
 
          compiler_flags="$compiler_flags $wl$qarg"
 
          prev=
 
          func_append compile_command " $wl$qarg"
 
          func_append finalize_command " $wl$qarg"
 
          continue
 
          ;;
 
        *)
 
          eval "$prev=\"\$arg\""
 
          prev=
 
          continue
 
          ;;
 
        esac
 
      fi # test -n "$prev"
 
 
 
      prevarg="$arg"
 
 
 
      case $arg in
 
      -all-static)
 
        if test -n "$link_static_flag"; then
 
          # See comment for -static flag below, for more details.
 
          func_append compile_command " $link_static_flag"
 
          func_append finalize_command " $link_static_flag"
 
        fi
 
        continue
 
        ;;
 
 
 
      -allow-undefined)
 
        # FIXME: remove this flag sometime in the future.
 
        func_fatal_error "\`-allow-undefined' must not be used because it is the default"
 
        ;;
 
 
 
      -avoid-version)
 
        avoid_version=yes
 
        continue
 
        ;;
 
 
 
      -dlopen)
 
        prev=dlfiles
 
        continue
 
        ;;
 
 
 
      -dlpreopen)
 
        prev=dlprefiles
 
        continue
 
        ;;
 
 
 
      -export-dynamic)
 
        export_dynamic=yes
 
        continue
 
        ;;
 
 
 
      -export-symbols | -export-symbols-regex)
 
        if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
 
          func_fatal_error "more than one -exported-symbols argument is not allowed"
 
        fi
 
        if test "X$arg" = "X-export-symbols"; then
 
          prev=expsyms
 
        else
 
          prev=expsyms_regex
 
        fi
 
        continue
 
        ;;
 
 
 
      -framework)
 
        prev=framework
 
        continue
 
        ;;
 
 
 
      -inst-prefix-dir)
 
        prev=inst_prefix
 
        continue
 
        ;;
 
 
 
      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
 
      # so, if we see these flags be careful not to treat them like -L
 
      -L[A-Z][A-Z]*:*)
 
        case $with_gcc/$host in
 
        no/*-*-irix* | /*-*-irix*)
 
          func_append compile_command " $arg"
 
          func_append finalize_command " $arg"
 
          ;;
 
        esac
 
        continue
 
        ;;
 
 
 
      -L*)
 
        func_stripname '-L' '' "$arg"
 
        dir=$func_stripname_result
 
        if test -z "$dir"; then
 
          if test "$#" -gt 0; then
 
            func_fatal_error "require no space between \`-L' and \`$1'"
 
          else
 
            func_fatal_error "need path for \`-L' option"
 
          fi
 
        fi
 
        # We need an absolute path.
 
        case $dir in
 
        [\\/]* | [A-Za-z]:[\\/]*) ;;
 
        *)
 
          absdir=`cd "$dir" && pwd`
 
          test -z "$absdir" && \
 
            func_fatal_error "cannot determine absolute directory name of \`$dir'"
 
          dir="$absdir"
 
          ;;
 
        esac
 
        case "$deplibs " in
 
        *" -L$dir "*) ;;
 
        *)
 
          deplibs="$deplibs -L$dir"
 
          lib_search_path="$lib_search_path $dir"
 
          ;;
 
        esac
 
        case $host in
 
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 
          testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 
          case :$dllsearchpath: in
 
          *":$dir:"*) ;;
 
          ::) dllsearchpath=$dir;;
 
          *) dllsearchpath="$dllsearchpath:$dir";;
 
          esac
 
          case :$dllsearchpath: in
 
          *":$testbindir:"*) ;;
 
          ::) dllsearchpath=$testbindir;;
 
          *) dllsearchpath="$dllsearchpath:$testbindir";;
 
          esac
 
          ;;
 
        esac
 
        continue
 
        ;;
 
 
 
      -l*)
 
        if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 
          case $host in
 
          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
 
            # These systems don't actually have a C or math library (as such)
 
            continue
 
            ;;
 
          *-*-os2*)
 
            # These systems don't actually have a C library (as such)
 
            test "X$arg" = "X-lc" && continue
 
            ;;
 
          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 
            # Do not include libc due to us having libc/libc_r.
 
            test "X$arg" = "X-lc" && continue
 
            ;;
 
          *-*-rhapsody* | *-*-darwin1.[012])
 
            # Rhapsody C and math libraries are in the System framework
 
            deplibs="$deplibs System.ltframework"
 
            continue
 
            ;;
 
          *-*-sco3.2v5* | *-*-sco5v6*)
 
            # Causes problems with __ctype
 
            test "X$arg" = "X-lc" && continue
 
            ;;
 
          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 
            # Compiler inserts libc in the correct place for threads to work
 
            test "X$arg" = "X-lc" && continue
 
            ;;
 
          esac
 
        elif test "X$arg" = "X-lc_r"; then
 
         case $host in
 
         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 
           # Do not include libc_r directly, use -pthread flag.
 
           continue
 
           ;;
 
         esac
 
        fi
 
        deplibs="$deplibs $arg"
 
        continue
 
        ;;
 
 
 
      -module)
 
        module=yes
 
        continue
 
        ;;
 
 
 
      # Tru64 UNIX uses -model [arg] to determine the layout of C++
 
      # classes, name mangling, and exception handling.
 
      # Darwin uses the -arch flag to determine output architecture.
 
      -model|-arch|-isysroot)
 
        compiler_flags="$compiler_flags $arg"
 
        func_append compile_command " $arg"
 
        func_append finalize_command " $arg"
 
        prev=xcompiler
 
        continue
 
        ;;
 
 
 
      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
 
        compiler_flags="$compiler_flags $arg"
 
        func_append compile_command " $arg"
 
        func_append finalize_command " $arg"
 
        case "$new_inherited_linker_flags " in
 
            *" $arg "*) ;;
 
            * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
 
        esac
 
        continue
 
        ;;
 
 
 
      -multi_module)
 
        single_module="${wl}-multi_module"
 
        continue
 
        ;;
 
 
 
      -no-fast-install)
 
        fast_install=no
 
        continue
 
        ;;
 
 
 
      -no-install)
 
        case $host in
 
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 
          # The PATH hackery in wrapper scripts is required on Windows
 
          # and Darwin in order for the loader to find any dlls it needs.
 
          func_warning "\`-no-install' is ignored for $host"
 
          func_warning "assuming \`-no-fast-install' instead"
 
          fast_install=no
 
          ;;
 
        *) no_install=yes ;;
 
        esac
 
        continue
 
        ;;
 
 
 
      -no-undefined)
 
        allow_undefined=no
 
        continue
 
        ;;
 
 
 
      -objectlist)
 
        prev=objectlist
 
        continue
 
        ;;
 
 
 
      -o) prev=output ;;
 
 
 
      -precious-files-regex)
 
        prev=precious_regex
 
        continue
 
        ;;
 
 
 
      -release)
 
        prev=release
 
        continue
 
        ;;
 
 
 
      -rpath)
 
        prev=rpath
 
        continue
 
        ;;
 
 
 
      -R)
 
        prev=xrpath
 
        continue
 
        ;;
 
 
 
      -R*)
 
        func_stripname '-R' '' "$arg"
 
        dir=$func_stripname_result
 
        # We need an absolute path.
 
        case $dir in
 
        [\\/]* | [A-Za-z]:[\\/]*) ;;
 
        *)
 
          func_fatal_error "only absolute run-paths are allowed"
 
          ;;
 
        esac
 
        case "$xrpath " in
 
        *" $dir "*) ;;
 
        *) xrpath="$xrpath $dir" ;;
 
        esac
 
        continue
 
        ;;
 
 
 
      -shared)
 
        # The effects of -shared are defined in a previous loop.
 
        continue
 
        ;;
 
 
 
      -shrext)
 
        prev=shrext
 
        continue
 
        ;;
 
 
 
      -static | -static-libtool-libs)
 
        # The effects of -static are defined in a previous loop.
 
        # We used to do the same as -all-static on platforms that
 
        # didn't have a PIC flag, but the assumption that the effects
 
        # would be equivalent was wrong.  It would break on at least
 
        # Digital Unix and AIX.
 
        continue
 
        ;;
 
 
 
      -thread-safe)
 
        thread_safe=yes
 
        continue
 
        ;;
 
 
 
      -version-info)
 
        prev=vinfo
 
        continue
 
        ;;
 
 
 
      -version-number)
 
        prev=vinfo
 
        vinfo_number=yes
 
        continue
 
        ;;
 
 
 
      -weak)
 
        prev=weak
 
        continue
 
        ;;
 
 
 
      -Wc,*)
 
        func_stripname '-Wc,' '' "$arg"
 
        args=$func_stripname_result
 
        arg=
 
        save_ifs="$IFS"; IFS=','
 
        for flag in $args; do
 
          IFS="$save_ifs"
 
          func_quote_for_eval "$flag"
 
          arg="$arg $wl$func_quote_for_eval_result"
 
          compiler_flags="$compiler_flags $func_quote_for_eval_result"
 
        done
 
        IFS="$save_ifs"
 
        func_stripname ' ' '' "$arg"
 
        arg=$func_stripname_result
 
        ;;
 
 
 
      -Wl,*)
 
        func_stripname '-Wl,' '' "$arg"
 
        args=$func_stripname_result
 
        arg=
 
        save_ifs="$IFS"; IFS=','
 
        for flag in $args; do
 
          IFS="$save_ifs"
 
          func_quote_for_eval "$flag"
 
          arg="$arg $wl$func_quote_for_eval_result"
 
          compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
 
          linker_flags="$linker_flags $func_quote_for_eval_result"
 
        done
 
        IFS="$save_ifs"
 
        func_stripname ' ' '' "$arg"
 
        arg=$func_stripname_result
 
        ;;
 
 
 
      -Xcompiler)
 
        prev=xcompiler
 
        continue
 
        ;;
 
 
 
      -Xlinker)
 
        prev=xlinker
 
        continue
 
        ;;
 
 
 
      -XCClinker)
 
        prev=xcclinker
 
        continue
 
        ;;
 
 
 
      # -msg_* for osf cc
 
      -msg_*)
 
        func_quote_for_eval "$arg"
 
        arg="$func_quote_for_eval_result"
 
        ;;
 
 
 
      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
 
      # -r[0-9][0-9]* specifies the processor on the SGI compiler
 
      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
 
      # +DA*, +DD* enable 64-bit mode on the HP compiler
 
      # -q* pass through compiler args for the IBM compiler
 
      # -m*, -t[45]*, -txscale* pass through architecture-specific
 
      # compiler args for GCC
 
      # -F/path gives path to uninstalled frameworks, gcc on darwin
 
      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
 
      # @file GCC response files
 
      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
 
      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
 
        func_quote_for_eval "$arg"
 
        arg="$func_quote_for_eval_result"
 
        func_append compile_command " $arg"
 
        func_append finalize_command " $arg"
 
        compiler_flags="$compiler_flags $arg"
 
        continue
 
        ;;
 
 
 
      # Some other compiler flag.
 
      -* | +*)
 
        func_quote_for_eval "$arg"
 
        arg="$func_quote_for_eval_result"
 
        ;;
 
 
 
      *.$objext)
 
        # A standard object.
 
        objs="$objs $arg"
 
        ;;
 
 
 
      *.lo)
 
        # A libtool-controlled object.
 
 
 
        # Check to see that this really is a libtool object.
 
        if func_lalib_unsafe_p "$arg"; then
 
          pic_object=
 
          non_pic_object=
 
 
 
          # Read the .lo file
 
          func_source "$arg"
 
 
 
          if test -z "$pic_object" ||
 
             test -z "$non_pic_object" ||
 
             test "$pic_object" = none &&
 
             test "$non_pic_object" = none; then
 
            func_fatal_error "cannot find name of object for \`$arg'"
 
          fi
 
 
 
          # Extract subdirectory from the argument.
 
          func_dirname "$arg" "/" ""
 
          xdir="$func_dirname_result"
 
 
 
          if test "$pic_object" != none; then
 
            # Prepend the subdirectory the object is found in.
 
            pic_object="$xdir$pic_object"
 
 
 
            if test "$prev" = dlfiles; then
 
              if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
 
                dlfiles="$dlfiles $pic_object"
 
                prev=
 
                continue
 
              else
 
                # If libtool objects are unsupported, then we need to preload.
 
                prev=dlprefiles
 
              fi
 
            fi
 
 
 
            # CHECK ME:  I think I busted this.  -Ossama
 
            if test "$prev" = dlprefiles; then
 
              # Preload the old-style object.
 
              dlprefiles="$dlprefiles $pic_object"
 
              prev=
 
            fi
 
 
 
            # A PIC object.
 
            func_append libobjs " $pic_object"
 
            arg="$pic_object"
 
          fi
 
 
 
          # Non-PIC object.
 
          if test "$non_pic_object" != none; then
 
            # Prepend the subdirectory the object is found in.
 
            non_pic_object="$xdir$non_pic_object"
 
 
 
            # A standard non-PIC object
 
            func_append non_pic_objects " $non_pic_object"
 
            if test -z "$pic_object" || test "$pic_object" = none ; then
 
              arg="$non_pic_object"
 
            fi
 
          else
 
            # If the PIC object exists, use it instead.
 
            # $xdir was prepended to $pic_object above.
 
            non_pic_object="$pic_object"
 
            func_append non_pic_objects " $non_pic_object"
 
          fi
 
        else
 
          # Only an error if not doing a dry-run.
 
          if $opt_dry_run; then
 
            # Extract subdirectory from the argument.
 
            func_dirname "$arg" "/" ""
 
            xdir="$func_dirname_result"
 
 
 
            func_lo2o "$arg"
 
            pic_object=$xdir$objdir/$func_lo2o_result
 
            non_pic_object=$xdir$func_lo2o_result
 
            func_append libobjs " $pic_object"
 
            func_append non_pic_objects " $non_pic_object"
 
          else
 
            func_fatal_error "\`$arg' is not a valid libtool object"
 
          fi
 
        fi
 
        ;;
 
 
 
      *.$libext)
 
        # An archive.
 
        deplibs="$deplibs $arg"
 
        old_deplibs="$old_deplibs $arg"
 
        continue
 
        ;;
 
 
 
      *.la)
 
        # A libtool-controlled library.
 
 
 
        if test "$prev" = dlfiles; then
 
          # This library was specified with -dlopen.
 
          dlfiles="$dlfiles $arg"
 
          prev=
 
        elif test "$prev" = dlprefiles; then
 
          # The library was specified with -dlpreopen.
 
          dlprefiles="$dlprefiles $arg"
 
          prev=
 
        else
 
          deplibs="$deplibs $arg"
 
        fi
 
        continue
 
        ;;
 
 
 
      # Some other compiler argument.
 
      *)
 
        # Unknown arguments in both finalize_command and compile_command need
 
        # to be aesthetically quoted because they are evaled later.
 
        func_quote_for_eval "$arg"
 
        arg="$func_quote_for_eval_result"
 
        ;;
 
      esac # arg
 
 
 
      # Now actually substitute the argument into the commands.
 
      if test -n "$arg"; then
 
        func_append compile_command " $arg"
 
        func_append finalize_command " $arg"
 
      fi
 
    done # argument parsing loop
 
 
 
    test -n "$prev" && \
 
      func_fatal_help "the \`$prevarg' option requires an argument"
 
 
 
    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
 
      eval arg=\"$export_dynamic_flag_spec\"
 
      func_append compile_command " $arg"
 
      func_append finalize_command " $arg"
 
    fi
 
 
 
    oldlibs=
 
    # calculate the name of the file, without its directory
 
    func_basename "$output"
 
    outputname="$func_basename_result"
 
    libobjs_save="$libobjs"
 
 
 
    if test -n "$shlibpath_var"; then
 
      # get the directories listed in $shlibpath_var
 
      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
 
    else
 
      shlib_search_path=
 
    fi
 
    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
 
    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
 
 
    func_dirname "$output" "/" ""
 
    output_objdir="$func_dirname_result$objdir"
 
    # Create the object directory.
 
    func_mkdir_p "$output_objdir"
 
 
 
    # Determine the type of output
 
    case $output in
 
    "")
 
      func_fatal_help "you must specify an output file"
 
      ;;
 
    *.$libext) linkmode=oldlib ;;
 
    *.lo | *.$objext) linkmode=obj ;;
 
    *.la) linkmode=lib ;;
 
    *) linkmode=prog ;; # Anything else should be a program.
 
    esac
 
 
 
    specialdeplibs=
 
 
 
    libs=
 
    # Find all interdependent deplibs by searching for libraries
 
    # that are linked more than once (e.g. -la -lb -la)
 
    for deplib in $deplibs; do
 
      if $opt_duplicate_deps ; then
 
        case "$libs " in
 
        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 
        esac
 
      fi
 
      libs="$libs $deplib"
 
    done
 
 
 
    if test "$linkmode" = lib; then
 
      libs="$predeps $libs $compiler_lib_search_path $postdeps"
 
 
 
      # Compute libraries that are listed more than once in $predeps
 
      # $postdeps and mark them as special (i.e., whose duplicates are
 
      # not to be eliminated).
 
      pre_post_deps=
 
      if $opt_duplicate_compiler_generated_deps; then
 
        for pre_post_dep in $predeps $postdeps; do
 
          case "$pre_post_deps " in
 
          *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
 
          esac
 
          pre_post_deps="$pre_post_deps $pre_post_dep"
 
        done
 
      fi
 
      pre_post_deps=
 
    fi
 
 
 
    deplibs=
 
    newdependency_libs=
 
    newlib_search_path=
 
    need_relink=no # whether we're linking any uninstalled libtool libraries
 
    notinst_deplibs= # not-installed libtool libraries
 
    notinst_path= # paths that contain not-installed libtool libraries
 
 
 
    case $linkmode in
 
    lib)
 
        passes="conv dlpreopen link"
 
        for file in $dlfiles $dlprefiles; do
 
          case $file in
 
          *.la) ;;
 
          *)
 
            func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
 
            ;;
 
          esac
 
        done
 
        ;;
 
    prog)
 
        compile_deplibs=
 
        finalize_deplibs=
 
        alldeplibs=no
 
        newdlfiles=
 
        newdlprefiles=
 
        passes="conv scan dlopen dlpreopen link"
 
        ;;
 
    *)  passes="conv"
 
        ;;
 
    esac
 
 
 
    for pass in $passes; do
 
      # The preopen pass in lib mode reverses $deplibs; put it back here
 
      # so that -L comes before libs that need it for instance...
 
      if test "$linkmode,$pass" = "lib,link"; then
 
        ## FIXME: Find the place where the list is rebuilt in the wrong
 
        ##        order, and fix it there properly
 
        tmp_deplibs=
 
        for deplib in $deplibs; do
 
          tmp_deplibs="$deplib $tmp_deplibs"
 
        done
 
        deplibs="$tmp_deplibs"
 
      fi
 
 
 
      if test "$linkmode,$pass" = "lib,link" ||
 
         test "$linkmode,$pass" = "prog,scan"; then
 
        libs="$deplibs"
 
        deplibs=
 
      fi
 
      if test "$linkmode" = prog; then
 
        case $pass in
 
        dlopen) libs="$dlfiles" ;;
 
        dlpreopen) libs="$dlprefiles" ;;
 
        link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 
        esac
 
      fi
 
      if test "$linkmode,$pass" = "lib,dlpreopen"; then
 
        # Collect and forward deplibs of preopened libtool libs
 
        for lib in $dlprefiles; do
 
          # Ignore non-libtool-libs
 
          dependency_libs=
 
          case $lib in
 
          *.la) func_source "$lib" ;;
 
          esac
 
 
 
          # Collect preopened libtool deplibs, except any this library
 
          # has declared as weak libs
 
          for deplib in $dependency_libs; do
 
            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
 
            case " $weak_libs " in
 
            *" $deplib_base "*) ;;
 
            *) deplibs="$deplibs $deplib" ;;
 
            esac
 
          done
 
        done
 
        libs="$dlprefiles"
 
      fi
 
      if test "$pass" = dlopen; then
 
        # Collect dlpreopened libraries
 
        save_deplibs="$deplibs"
 
        deplibs=
 
      fi
 
 
 
      for deplib in $libs; do
 
        lib=
 
        found=no
 
        case $deplib in
 
        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
 
          if test "$linkmode,$pass" = "prog,link"; then
 
            compile_deplibs="$deplib $compile_deplibs"
 
            finalize_deplibs="$deplib $finalize_deplibs"
 
          else
 
            compiler_flags="$compiler_flags $deplib"
 
            if test "$linkmode" = lib ; then
 
                case "$new_inherited_linker_flags " in
 
                    *" $deplib "*) ;;
 
                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
 
                esac
 
            fi
 
          fi
 
          continue
 
          ;;
 
        -l*)
 
          if test "$linkmode" != lib && test "$linkmode" != prog; then
 
            func_warning "\`-l' is ignored for archives/objects"
 
            continue
 
          fi
 
          func_stripname '-l' '' "$deplib"
 
          name=$func_stripname_result
 
          if test "$linkmode" = lib; then
 
            searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
 
          else
 
            searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
 
          fi
 
          for searchdir in $searchdirs; do
 
            for search_ext in .la $std_shrext .so .a; do
 
              # Search the libtool library
 
              lib="$searchdir/lib${name}${search_ext}"
 
              if test -f "$lib"; then
 
                if test "$search_ext" = ".la"; then
 
                  found=yes
 
                else
 
                  found=no
 
                fi
 
                break 2
 
              fi
 
            done
 
          done
 
          if test "$found" != yes; then
 
            # deplib doesn't seem to be a libtool library
 
            if test "$linkmode,$pass" = "prog,link"; then
 
              compile_deplibs="$deplib $compile_deplibs"
 
              finalize_deplibs="$deplib $finalize_deplibs"
 
            else
 
              deplibs="$deplib $deplibs"
 
              test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
 
            fi
 
            continue
 
          else # deplib is a libtool library
 
            # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
 
            # We need to do some special things here, and not later.
 
            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 
              case " $predeps $postdeps " in
 
              *" $deplib "*)
 
                if func_lalib_p "$lib"; then
 
                  library_names=
 
                  old_library=
 
                  func_source "$lib"
 
                  for l in $old_library $library_names; do
 
                    ll="$l"
 
                  done
 
                  if test "X$ll" = "X$old_library" ; then # only static version available
 
                    found=no
 
                    func_dirname "$lib" "" "."
 
                    ladir="$func_dirname_result"
 
                    lib=$ladir/$old_library
 
                    if test "$linkmode,$pass" = "prog,link"; then
 
                      compile_deplibs="$deplib $compile_deplibs"
 
                      finalize_deplibs="$deplib $finalize_deplibs"
 
                    else
 
                      deplibs="$deplib $deplibs"
 
                      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
 
                    fi
 
                    continue
 
                  fi
 
                fi
 
                ;;
 
              *) ;;
 
              esac
 
            fi
 
          fi
 
          ;; # -l
 
        *.ltframework)
 
          if test "$linkmode,$pass" = "prog,link"; then
 
            compile_deplibs="$deplib $compile_deplibs"
 
            finalize_deplibs="$deplib $finalize_deplibs"
 
          else
 
            deplibs="$deplib $deplibs"
 
            if test "$linkmode" = lib ; then
 
                case "$new_inherited_linker_flags " in
 
                    *" $deplib "*) ;;
 
                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
 
                esac
 
            fi
 
          fi
 
          continue
 
          ;;
 
        -L*)
 
          case $linkmode in
 
          lib)
 
            deplibs="$deplib $deplibs"
 
            test "$pass" = conv && continue
 
            newdependency_libs="$deplib $newdependency_libs"
 
            func_stripname '-L' '' "$deplib"
 
            newlib_search_path="$newlib_search_path $func_stripname_result"
 
            ;;
 
          prog)
 
            if test "$pass" = conv; then
 
              deplibs="$deplib $deplibs"
 
              continue
 
            fi
 
            if test "$pass" = scan; then
 
              deplibs="$deplib $deplibs"
 
            else
 
              compile_deplibs="$deplib $compile_deplibs"
 
              finalize_deplibs="$deplib $finalize_deplibs"
 
            fi
 
            func_stripname '-L' '' "$deplib"
 
            newlib_search_path="$newlib_search_path $func_stripname_result"
 
            ;;
 
          *)
 
            func_warning "\`-L' is ignored for archives/objects"
 
            ;;
 
          esac # linkmode
 
          continue
 
          ;; # -L
 
        -R*)
 
          if test "$pass" = link; then
 
            func_stripname '-R' '' "$deplib"
 
            dir=$func_stripname_result
 
            # Make sure the xrpath contains only unique directories.
 
            case "$xrpath " in
 
            *" $dir "*) ;;
 
            *) xrpath="$xrpath $dir" ;;
 
            esac
 
          fi
 
          deplibs="$deplib $deplibs"
 
          continue
 
          ;;
 
        *.la) lib="$deplib" ;;
 
        *.$libext)
 
          if test "$pass" = conv; then
 
            deplibs="$deplib $deplibs"
 
            continue
 
          fi
 
          case $linkmode in
 
          lib)
 
            # Linking convenience modules into shared libraries is allowed,
 
            # but linking other static libraries is non-portable.
 
            case " $dlpreconveniencelibs " in
 
            *" $deplib "*) ;;
 
            *)
 
              valid_a_lib=no
 
              case $deplibs_check_method in
 
                match_pattern*)
 
                  set dummy $deplibs_check_method; shift
 
                  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 
                  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
 
                    | $EGREP "$match_pattern_regex" > /dev/null; then
 
                    valid_a_lib=yes
 
                  fi
 
                ;;
 
                pass_all)
 
                  valid_a_lib=yes
 
                ;;
 
              esac
 
              if test "$valid_a_lib" != yes; then
 
                $ECHO
 
                $ECHO "*** Warning: Trying to link with static lib archive $deplib."
 
                $ECHO "*** I have the capability to make that library automatically link in when"
 
                $ECHO "*** you link to this library.  But I can only do this if you have a"
 
                $ECHO "*** shared version of the library, which you do not appear to have"
 
                $ECHO "*** because the file extensions .$libext of this argument makes me believe"
 
                $ECHO "*** that it is just a static archive that I should not use here."
 
              else
 
                $ECHO
 
                $ECHO "*** Warning: Linking the shared library $output against the"
 
                $ECHO "*** static library $deplib is not portable!"
 
                deplibs="$deplib $deplibs"
 
              fi
 
              ;;
 
            esac
 
            continue
 
            ;;
 
          prog)
 
            if test "$pass" != link; then
 
              deplibs="$deplib $deplibs"
 
            else
 
              compile_deplibs="$deplib $compile_deplibs"
 
              finalize_deplibs="$deplib $finalize_deplibs"
 
            fi
 
            continue
 
            ;;
 
          esac # linkmode
 
          ;; # *.$libext
 
        *.lo | *.$objext)
 
          if test "$pass" = conv; then
 
            deplibs="$deplib $deplibs"
 
          elif test "$linkmode" = prog; then
 
            if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
 
              # If there is no dlopen support or we're linking statically,
 
              # we need to preload.
 
              newdlprefiles="$newdlprefiles $deplib"
 
              compile_deplibs="$deplib $compile_deplibs"
 
              finalize_deplibs="$deplib $finalize_deplibs"
 
            else
 
              newdlfiles="$newdlfiles $deplib"
 
            fi
 
          fi
 
          continue
 
          ;;
 
        %DEPLIBS%)
 
          alldeplibs=yes
 
          continue
 
          ;;
 
        esac # case $deplib
 
 
 
        if test "$found" = yes || test -f "$lib"; then :
 
        else
 
          func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
 
        fi
 
 
 
        # Check to see that this really is a libtool archive.
 
        func_lalib_unsafe_p "$lib" \
 
          || func_fatal_error "\`$lib' is not a valid libtool archive"
 
 
 
        func_dirname "$lib" "" "."
 
        ladir="$func_dirname_result"
 
 
 
        dlname=
 
        dlopen=
 
        dlpreopen=
 
        libdir=
 
        library_names=
 
        old_library=
 
        inherited_linker_flags=
 
        # If the library was installed with an old release of libtool,
 
        # it will not redefine variables installed, or shouldnotlink
 
        installed=yes
 
        shouldnotlink=no
 
        avoidtemprpath=
 
 
 
 
 
        # Read the .la file
 
        func_source "$lib"
 
 
 
        # Convert "-framework foo" to "foo.ltframework"
 
        if test -n "$inherited_linker_flags"; then
 
          tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
 
          for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
 
            case " $new_inherited_linker_flags " in
 
              *" $tmp_inherited_linker_flag "*) ;;
 
              *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
 
            esac
 
          done
 
        fi
 
        dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 
        if test "$linkmode,$pass" = "lib,link" ||
 
           test "$linkmode,$pass" = "prog,scan" ||
 
           { test "$linkmode" != prog && test "$linkmode" != lib; }; then
 
          test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
 
          test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
 
        fi
 
 
 
        if test "$pass" = conv; then
 
          # Only check for convenience libraries
 
          deplibs="$lib $deplibs"
 
          if test -z "$libdir"; then
 
            if test -z "$old_library"; then
 
              func_fatal_error "cannot find name of link library for \`$lib'"
 
            fi
 
            # It is a libtool convenience library, so add in its objects.
 
            convenience="$convenience $ladir/$objdir/$old_library"
 
            old_convenience="$old_convenience $ladir/$objdir/$old_library"
 
          elif test "$linkmode" != prog && test "$linkmode" != lib; then
 
            func_fatal_error "\`$lib' is not a convenience library"
 
          fi
 
          tmp_libs=
 
          for deplib in $dependency_libs; do
 
            deplibs="$deplib $deplibs"
 
            if $opt_duplicate_deps ; then
 
              case "$tmp_libs " in
 
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 
              esac
 
            fi
 
            tmp_libs="$tmp_libs $deplib"
 
          done
 
          continue
 
        fi # $pass = conv
 
 
 
 
 
        # Get the name of the library we link against.
 
        linklib=
 
        for l in $old_library $library_names; do
 
          linklib="$l"
 
        done
 
        if test -z "$linklib"; then
 
          func_fatal_error "cannot find name of link library for \`$lib'"
 
        fi
 
 
 
        # This library was specified with -dlopen.
 
        if test "$pass" = dlopen; then
 
          if test -z "$libdir"; then
 
            func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
 
          fi
 
          if test -z "$dlname" ||
 
             test "$dlopen_support" != yes ||
 
             test "$build_libtool_libs" = no; then
 
            # If there is no dlname, no dlopen support or we're linking
 
            # statically, we need to preload.  We also need to preload any
 
            # dependent libraries so libltdl's deplib preloader doesn't
 
            # bomb out in the load deplibs phase.
 
            dlprefiles="$dlprefiles $lib $dependency_libs"
 
          else
 
            newdlfiles="$newdlfiles $lib"
 
          fi
 
          continue
 
        fi # $pass = dlopen
 
 
 
        # We need an absolute path.
 
        case $ladir in
 
        [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
 
        *)
 
          abs_ladir=`cd "$ladir" && pwd`
 
          if test -z "$abs_ladir"; then
 
            func_warning "cannot determine absolute directory name of \`$ladir'"
 
            func_warning "passing it literally to the linker, although it might fail"
 
            abs_ladir="$ladir"
 
          fi
 
          ;;
 
        esac
 
        func_basename "$lib"
 
        laname="$func_basename_result"
 
 
 
        # Find the relevant object directory and library name.
 
        if test "X$installed" = Xyes; then
 
          if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
 
            func_warning "library \`$lib' was moved."
 
            dir="$ladir"
 
            absdir="$abs_ladir"
 
            libdir="$abs_ladir"
 
          else
 
            dir="$libdir"
 
            absdir="$libdir"
 
          fi
 
          test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 
        else
 
          if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
 
            dir="$ladir"
 
            absdir="$abs_ladir"
 
            # Remove this search path later
 
            notinst_path="$notinst_path $abs_ladir"
 
          else
 
            dir="$ladir/$objdir"
 
            absdir="$abs_ladir/$objdir"
 
            # Remove this search path later
 
            notinst_path="$notinst_path $abs_ladir"
 
          fi
 
        fi # $installed = yes
 
        func_stripname 'lib' '.la' "$laname"
 
        name=$func_stripname_result
 
 
 
        # This library was specified with -dlpreopen.
 
        if test "$pass" = dlpreopen; then
 
          if test -z "$libdir" && test "$linkmode" = prog; then
 
            func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
 
          fi
 
          # Prefer using a static library (so that no silly _DYNAMIC symbols
 
          # are required to link).
 
          if test -n "$old_library"; then
 
            newdlprefiles="$newdlprefiles $dir/$old_library"
 
            # Keep a list of preopened convenience libraries to check
 
            # that they are being used correctly in the link pass.
 
            test -z "$libdir" && \
 
                dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
 
          # Otherwise, use the dlname, so that lt_dlopen finds it.
 
          elif test -n "$dlname"; then
 
            newdlprefiles="$newdlprefiles $dir/$dlname"
 
          else
 
            newdlprefiles="$newdlprefiles $dir/$linklib"
 
          fi
 
        fi # $pass = dlpreopen
 
 
 
        if test -z "$libdir"; then
 
          # Link the convenience library
 
          if test "$linkmode" = lib; then
 
            deplibs="$dir/$old_library $deplibs"
 
          elif test "$linkmode,$pass" = "prog,link"; then
 
            compile_deplibs="$dir/$old_library $compile_deplibs"
 
            finalize_deplibs="$dir/$old_library $finalize_deplibs"
 
          else
 
            deplibs="$lib $deplibs" # used for prog,scan pass
 
          fi
 
          continue
 
        fi
 
 
 
 
 
        if test "$linkmode" = prog && test "$pass" != link; then
 
          newlib_search_path="$newlib_search_path $ladir"
 
          deplibs="$lib $deplibs"
 
 
 
          linkalldeplibs=no
 
          if test "$link_all_deplibs" != no || test -z "$library_names" ||
 
             test "$build_libtool_libs" = no; then
 
            linkalldeplibs=yes
 
          fi
 
 
 
          tmp_libs=
 
          for deplib in $dependency_libs; do
 
            case $deplib in
 
            -L*) func_stripname '-L' '' "$deplib"
 
                 newlib_search_path="$newlib_search_path $func_stripname_result"
 
                 ;;
 
            esac
 
            # Need to link against all dependency_libs?
 
            if test "$linkalldeplibs" = yes; then
 
              deplibs="$deplib $deplibs"
 
            else
 
              # Need to hardcode shared library paths
 
              # or/and link against static libraries
 
              newdependency_libs="$deplib $newdependency_libs"
 
            fi
 
            if $opt_duplicate_deps ; then
 
              case "$tmp_libs " in
 
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 
              esac
 
            fi
 
            tmp_libs="$tmp_libs $deplib"
 
          done # for deplib
 
          continue
 
        fi # $linkmode = prog...
 
 
 
        if test "$linkmode,$pass" = "prog,link"; then
 
          if test -n "$library_names" &&
 
             { { test "$prefer_static_libs" = no ||
 
                 test "$prefer_static_libs,$installed" = "built,yes"; } ||
 
               test -z "$old_library"; }; then
 
            # We need to hardcode the library path
 
            if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 
              # Make sure the rpath contains only unique directories.
 
              case "$temp_rpath:" in
 
              *"$absdir:"*) ;;
 
              *) temp_rpath="$temp_rpath$absdir:" ;;
 
              esac
 
            fi
 
 
 
            # Hardcode the library path.
 
            # Skip directories that are in the system default run-time
 
            # search path.
 
            case " $sys_lib_dlsearch_path " in
 
            *" $absdir "*) ;;
 
            *)
 
              case "$compile_rpath " in
 
              *" $absdir "*) ;;
 
              *) compile_rpath="$compile_rpath $absdir"
 
              esac
 
              ;;
 
            esac
 
            case " $sys_lib_dlsearch_path " in
 
            *" $libdir "*) ;;
 
            *)
 
              case "$finalize_rpath " in
 
              *" $libdir "*) ;;
 
              *) finalize_rpath="$finalize_rpath $libdir"
 
              esac
 
              ;;
 
            esac
 
          fi # $linkmode,$pass = prog,link...
 
 
 
          if test "$alldeplibs" = yes &&
 
             { test "$deplibs_check_method" = pass_all ||
 
               { test "$build_libtool_libs" = yes &&
 
                 test -n "$library_names"; }; }; then
 
            # We only need to search for static libraries
 
            continue
 
          fi
 
        fi
 
 
 
        link_static=no # Whether the deplib will be linked statically
 
        use_static_libs=$prefer_static_libs
 
        if test "$use_static_libs" = built && test "$installed" = yes; then
 
          use_static_libs=no
 
        fi
 
        if test -n "$library_names" &&
 
           { test "$use_static_libs" = no || test -z "$old_library"; }; then
 
          case $host in
 
          *cygwin* | *mingw* | *cegcc*)
 
              # No point in relinking DLLs because paths are not encoded
 
              notinst_deplibs="$notinst_deplibs $lib"
 
              need_relink=no
 
            ;;
 
          *)
 
            if test "$installed" = no; then
 
              notinst_deplibs="$notinst_deplibs $lib"
 
              need_relink=yes
 
            fi
 
            ;;
 
          esac
 
          # This is a shared library
 
 
 
          # Warn about portability, can't link against -module's on some
 
          # systems (darwin).  Don't bleat about dlopened modules though!
 
          dlopenmodule=""
 
          for dlpremoduletest in $dlprefiles; do
 
            if test "X$dlpremoduletest" = "X$lib"; then
 
              dlopenmodule="$dlpremoduletest"
 
              break
 
            fi
 
          done
 
          if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
 
            $ECHO
 
            if test "$linkmode" = prog; then
 
              $ECHO "*** Warning: Linking the executable $output against the loadable module"
 
            else
 
              $ECHO "*** Warning: Linking the shared library $output against the loadable module"
 
            fi
 
            $ECHO "*** $linklib is not portable!"
 
          fi
 
          if test "$linkmode" = lib &&
 
             test "$hardcode_into_libs" = yes; then
 
            # Hardcode the library path.
 
            # Skip directories that are in the system default run-time
 
            # search path.
 
            case " $sys_lib_dlsearch_path " in
 
            *" $absdir "*) ;;
 
            *)
 
              case "$compile_rpath " in
 
              *" $absdir "*) ;;
 
              *) compile_rpath="$compile_rpath $absdir"
 
              esac
 
              ;;
 
            esac
 
            case " $sys_lib_dlsearch_path " in
 
            *" $libdir "*) ;;
 
            *)
 
              case "$finalize_rpath " in
 
              *" $libdir "*) ;;
 
              *) finalize_rpath="$finalize_rpath $libdir"
 
              esac
 
              ;;
 
            esac
 
          fi
 
 
 
          if test -n "$old_archive_from_expsyms_cmds"; then
 
            # figure out the soname
 
            set dummy $library_names
 
            shift
 
            realname="$1"
 
            shift
 
            libname=`eval "\\$ECHO \"$libname_spec\""`
 
            # use dlname if we got it. it's perfectly good, no?
 
            if test -n "$dlname"; then
 
              soname="$dlname"
 
            elif test -n "$soname_spec"; then
 
              # bleh windows
 
              case $host in
 
              *cygwin* | mingw* | *cegcc*)
 
                func_arith $current - $age
 
                major=$func_arith_result
 
                versuffix="-$major"
 
                ;;
 
              esac
 
              eval soname=\"$soname_spec\"
 
            else
 
              soname="$realname"
 
            fi
 
 
 
            # Make a new name for the extract_expsyms_cmds to use
 
            soroot="$soname"
 
            func_basename "$soroot"
 
            soname="$func_basename_result"
 
            func_stripname 'lib' '.dll' "$soname"
 
            newlib=libimp-$func_stripname_result.a
 
 
 
            # If the library has no export list, then create one now
 
            if test -f "$output_objdir/$soname-def"; then :
 
            else
 
              func_verbose "extracting exported symbol list from \`$soname'"
 
              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
 
            fi
 
 
 
            # Create $newlib
 
            if test -f "$output_objdir/$newlib"; then :; else
 
              func_verbose "generating import library for \`$soname'"
 
              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
 
            fi
 
            # make sure the library variables are pointing to the new library
 
            dir=$output_objdir
 
            linklib=$newlib
 
          fi # test -n "$old_archive_from_expsyms_cmds"
 
 
 
          if test "$linkmode" = prog || test "$mode" != relink; then
 
            add_shlibpath=
 
            add_dir=
 
            add=
 
            lib_linked=yes
 
            case $hardcode_action in
 
            immediate | unsupported)
 
              if test "$hardcode_direct" = no; then
 
                add="$dir/$linklib"
 
                case $host in
 
                  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
 
                  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
 
                  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
 
                    *-*-unixware7*) add_dir="-L$dir" ;;
 
                  *-*-darwin* )
 
                    # if the lib is a (non-dlopened) module then we can not
 
                    # link against it, someone is ignoring the earlier warnings
 
                    if /usr/bin/file -L $add 2> /dev/null |
 
                         $GREP ": [^:]* bundle" >/dev/null ; then
 
                      if test "X$dlopenmodule" != "X$lib"; then
 
                        $ECHO "*** Warning: lib $linklib is a module, not a shared library"
 
                        if test -z "$old_library" ; then
 
                          $ECHO
 
                          $ECHO "*** And there doesn't seem to be a static archive available"
 
                          $ECHO "*** The link will probably fail, sorry"
 
                        else
 
                          add="$dir/$old_library"
 
                        fi
 
                      elif test -n "$old_library"; then
 
                        add="$dir/$old_library"
 
                      fi
 
                    fi
 
                esac
 
              elif test "$hardcode_minus_L" = no; then
 
                case $host in
 
                *-*-sunos*) add_shlibpath="$dir" ;;
 
                esac
 
                add_dir="-L$dir"
 
                add="-l$name"
 
              elif test "$hardcode_shlibpath_var" = no; then
 
                add_shlibpath="$dir"
 
                add="-l$name"
 
              else
 
                lib_linked=no
 
              fi
 
              ;;
 
            relink)
 
              if test "$hardcode_direct" = yes &&
 
                 test "$hardcode_direct_absolute" = no; then
 
                add="$dir/$linklib"
 
              elif test "$hardcode_minus_L" = yes; then
 
                add_dir="-L$dir"
 
                # Try looking first in the location we're being installed to.
 
                if test -n "$inst_prefix_dir"; then
 
                  case $libdir in
 
                    [\\/]*)
 
                      add_dir="$add_dir -L$inst_prefix_dir$libdir"
 
                      ;;
 
                  esac
 
                fi
 
                add="-l$name"
 
              elif test "$hardcode_shlibpath_var" = yes; then
 
                add_shlibpath="$dir"
 
                add="-l$name"
 
              else
 
                lib_linked=no
 
              fi
 
              ;;
 
            *) lib_linked=no ;;
 
            esac
 
 
 
            if test "$lib_linked" != yes; then
 
              func_fatal_configuration "unsupported hardcode properties"
 
            fi
 
 
 
            if test -n "$add_shlibpath"; then
 
              case :$compile_shlibpath: in
 
              *":$add_shlibpath:"*) ;;
 
              *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
 
              esac
 
            fi
 
            if test "$linkmode" = prog; then
 
              test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
 
              test -n "$add" && compile_deplibs="$add $compile_deplibs"
 
            else
 
              test -n "$add_dir" && deplibs="$add_dir $deplibs"
 
              test -n "$add" && deplibs="$add $deplibs"
 
              if test "$hardcode_direct" != yes &&
 
                 test "$hardcode_minus_L" != yes &&
 
                 test "$hardcode_shlibpath_var" = yes; then
 
                case :$finalize_shlibpath: in
 
                *":$libdir:"*) ;;
 
                *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
 
                esac
 
              fi
 
            fi
 
          fi
 
 
 
          if test "$linkmode" = prog || test "$mode" = relink; then
 
            add_shlibpath=
 
            add_dir=
 
            add=
 
            # Finalize command for both is simple: just hardcode it.
 
            if test "$hardcode_direct" = yes &&
 
               test "$hardcode_direct_absolute" = no; then
 
              add="$libdir/$linklib"
 
            elif test "$hardcode_minus_L" = yes; then
 
              add_dir="-L$libdir"
 
              add="-l$name"
 
            elif test "$hardcode_shlibpath_var" = yes; then
 
              case :$finalize_shlibpath: in
 
              *":$libdir:"*) ;;
 
              *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
 
              esac
 
              add="-l$name"
 
            elif test "$hardcode_automatic" = yes; then
 
              if test -n "$inst_prefix_dir" &&
 
                 test -f "$inst_prefix_dir$libdir/$linklib" ; then
 
                add="$inst_prefix_dir$libdir/$linklib"
 
              else
 
                add="$libdir/$linklib"
 
              fi
 
            else
 
              # We cannot seem to hardcode it, guess we'll fake it.
 
              add_dir="-L$libdir"
 
              # Try looking first in the location we're being installed to.
 
              if test -n "$inst_prefix_dir"; then
 
                case $libdir in
 
                  [\\/]*)
 
                    add_dir="$add_dir -L$inst_prefix_dir$libdir"
 
                    ;;
 
                esac
 
              fi
 
              add="-l$name"
 
            fi
 
 
 
            if test "$linkmode" = prog; then
 
              test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
 
              test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
 
            else
 
              test -n "$add_dir" && deplibs="$add_dir $deplibs"
 
              test -n "$add" && deplibs="$add $deplibs"
 
            fi
 
          fi
 
        elif test "$linkmode" = prog; then
 
          # Here we assume that one of hardcode_direct or hardcode_minus_L
 
          # is not unsupported.  This is valid on all known static and
 
          # shared platforms.
 
          if test "$hardcode_direct" != unsupported; then
 
            test -n "$old_library" && linklib="$old_library"
 
            compile_deplibs="$dir/$linklib $compile_deplibs"
 
            finalize_deplibs="$dir/$linklib $finalize_deplibs"
 
          else
 
            compile_deplibs="-l$name -L$dir $compile_deplibs"
 
            finalize_deplibs="-l$name -L$dir $finalize_deplibs"
 
          fi
 
        elif test "$build_libtool_libs" = yes; then
 
          # Not a shared library
 
          if test "$deplibs_check_method" != pass_all; then
 
            # We're trying link a shared library against a static one
 
            # but the system doesn't support it.
 
 
 
            # Just print a warning and add the library to dependency_libs so
 
            # that the program can be linked against the static library.
 
            $ECHO
 
            $ECHO "*** Warning: This system can not link to static lib archive $lib."
 
            $ECHO "*** I have the capability to make that library automatically link in when"
 
            $ECHO "*** you link to this library.  But I can only do this if you have a"
 
            $ECHO "*** shared version of the library, which you do not appear to have."
 
            if test "$module" = yes; then
 
              $ECHO "*** But as you try to build a module library, libtool will still create "
 
              $ECHO "*** a static module, that should work as long as the dlopening application"
 
              $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
 
              if test -z "$global_symbol_pipe"; then
 
                $ECHO
 
                $ECHO "*** However, this would only work if libtool was able to extract symbol"
 
                $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
 
                $ECHO "*** not find such a program.  So, this module is probably useless."
 
                $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 
              fi
 
              if test "$build_old_libs" = no; then
 
                build_libtool_libs=module
 
                build_old_libs=yes
 
              else
 
                build_libtool_libs=no
 
              fi
 
            fi
 
          else
 
            deplibs="$dir/$old_library $deplibs"
 
            link_static=yes
 
          fi
 
        fi # link shared/static library?
 
 
 
        if test "$linkmode" = lib; then
 
          if test -n "$dependency_libs" &&
 
             { test "$hardcode_into_libs" != yes ||
 
               test "$build_old_libs" = yes ||
 
               test "$link_static" = yes; }; then
 
            # Extract -R from dependency_libs
 
            temp_deplibs=
 
            for libdir in $dependency_libs; do
 
              case $libdir in
 
              -R*) func_stripname '-R' '' "$libdir"
 
                   temp_xrpath=$func_stripname_result
 
                   case " $xrpath " in
 
                   *" $temp_xrpath "*) ;;
 
                   *) xrpath="$xrpath $temp_xrpath";;
 
                   esac;;
 
              *) temp_deplibs="$temp_deplibs $libdir";;
 
              esac
 
            done
 
            dependency_libs="$temp_deplibs"
 
          fi
 
 
 
          newlib_search_path="$newlib_search_path $absdir"
 
          # Link against this library
 
          test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 
          # ... and its dependency_libs
 
          tmp_libs=
 
          for deplib in $dependency_libs; do
 
            newdependency_libs="$deplib $newdependency_libs"
 
            if $opt_duplicate_deps ; then
 
              case "$tmp_libs " in
 
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 
              esac
 
            fi
 
            tmp_libs="$tmp_libs $deplib"
 
          done
 
 
 
          if test "$link_all_deplibs" != no; then
 
            # Add the search paths of all dependency libraries
 
            for deplib in $dependency_libs; do
 
              case $deplib in
 
              -L*) path="$deplib" ;;
 
              *.la)
 
                func_dirname "$deplib" "" "."
 
                dir="$func_dirname_result"
 
                # We need an absolute path.
 
                case $dir in
 
                [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 
                *)
 
                  absdir=`cd "$dir" && pwd`
 
                  if test -z "$absdir"; then
 
                    func_warning "cannot determine absolute directory name of \`$dir'"
 
                    absdir="$dir"
 
                  fi
 
                  ;;
 
                esac
 
                if $GREP "^installed=no" $deplib > /dev/null; then
 
                case $host in
 
                *-*-darwin*)
 
                  depdepl=
 
                  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
 
                  if test -n "$deplibrary_names" ; then
 
                    for tmp in $deplibrary_names ; do
 
                      depdepl=$tmp
 
                    done
 
                    if test -f "$absdir/$objdir/$depdepl" ; then
 
                      depdepl="$absdir/$objdir/$depdepl"
 
                      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
 
                      if test -z "$darwin_install_name"; then
 
                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
 
                      fi
 
                      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
 
                      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
 
                      path=
 
                    fi
 
                  fi
 
                  ;;
 
                *)
 
                  path="-L$absdir/$objdir"
 
                  ;;
 
                esac
 
                else
 
                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 
                  test -z "$libdir" && \
 
                    func_fatal_error "\`$deplib' is not a valid libtool archive"
 
                  test "$absdir" != "$libdir" && \
 
                    func_warning "\`$deplib' seems to be moved"
 
 
 
                  path="-L$absdir"
 
                fi
 
                ;;
 
              esac
 
              case " $deplibs " in
 
              *" $path "*) ;;
 
              *) deplibs="$path $deplibs" ;;
 
              esac
 
            done
 
          fi # link_all_deplibs != no
 
        fi # linkmode = lib
 
      done # for deplib in $libs
 
      if test "$pass" = link; then
 
        if test "$linkmode" = "prog"; then
 
          compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 
          finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 
        else
 
          compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 
        fi
 
      fi
 
      dependency_libs="$newdependency_libs"
 
      if test "$pass" = dlpreopen; then
 
        # Link the dlpreopened libraries before other libraries
 
        for deplib in $save_deplibs; do
 
          deplibs="$deplib $deplibs"
 
        done
 
      fi
 
      if test "$pass" != dlopen; then
 
        if test "$pass" != conv; then
 
          # Make sure lib_search_path contains only unique directories.
 
          lib_search_path=
 
          for dir in $newlib_search_path; do
 
            case "$lib_search_path " in
 
            *" $dir "*) ;;
 
            *) lib_search_path="$lib_search_path $dir" ;;
 
            esac
 
          done
 
          newlib_search_path=
 
        fi
 
 
 
        if test "$linkmode,$pass" != "prog,link"; then
 
          vars="deplibs"
 
        else
 
          vars="compile_deplibs finalize_deplibs"
 
        fi
 
        for var in $vars dependency_libs; do
 
          # Add libraries to $var in reverse order
 
          eval tmp_libs=\"\$$var\"
 
          new_libs=
 
          for deplib in $tmp_libs; do
 
            # FIXME: Pedantically, this is the right thing to do, so
 
            #        that some nasty dependency loop isn't accidentally
 
            #        broken:
 
            #new_libs="$deplib $new_libs"
 
            # Pragmatically, this seems to cause very few problems in
 
            # practice:
 
            case $deplib in
 
            -L*) new_libs="$deplib $new_libs" ;;
 
            -R*) ;;
 
            *)
 
              # And here is the reason: when a library appears more
 
              # than once as an explicit dependence of a library, or
 
              # is implicitly linked in more than once by the
 
              # compiler, it is considered special, and multiple
 
              # occurrences thereof are not removed.  Compare this
 
              # with having the same library being listed as a
 
              # dependency of multiple other libraries: in this case,
 
              # we know (pedantically, we assume) the library does not
 
              # need to be listed more than once, so we keep only the
 
              # last copy.  This is not always right, but it is rare
 
              # enough that we require users that really mean to play
 
              # such unportable linking tricks to link the library
 
              # using -Wl,-lname, so that libtool does not consider it
 
              # for duplicate removal.
 
              case " $specialdeplibs " in
 
              *" $deplib "*) new_libs="$deplib $new_libs" ;;
 
              *)
 
                case " $new_libs " in
 
                *" $deplib "*) ;;
 
                *) new_libs="$deplib $new_libs" ;;
 
                esac
 
                ;;
 
              esac
 
              ;;
 
            esac
 
          done
 
          tmp_libs=
 
          for deplib in $new_libs; do
 
            case $deplib in
 
            -L*)
 
              case " $tmp_libs " in
 
              *" $deplib "*) ;;
 
              *) tmp_libs="$tmp_libs $deplib" ;;
 
              esac
 
              ;;
 
            *) tmp_libs="$tmp_libs $deplib" ;;
 
            esac
 
          done
 
          eval $var=\"$tmp_libs\"
 
        done # for var
 
      fi
 
      # Last step: remove runtime libs from dependency_libs
 
      # (they stay in deplibs)
 
      tmp_libs=
 
      for i in $dependency_libs ; do
 
        case " $predeps $postdeps $compiler_lib_search_path " in
 
        *" $i "*)
 
          i=""
 
          ;;
 
        esac
 
        if test -n "$i" ; then
 
          tmp_libs="$tmp_libs $i"
 
        fi
 
      done
 
      dependency_libs=$tmp_libs
 
    done # for pass
 
    if test "$linkmode" = prog; then
 
      dlfiles="$newdlfiles"
 
    fi
 
    if test "$linkmode" = prog || test "$linkmode" = lib; then
 
      dlprefiles="$newdlprefiles"
 
    fi
 
 
 
    case $linkmode in
 
    oldlib)
 
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 
        func_warning "\`-dlopen' is ignored for archives"
 
      fi
 
 
 
      case " $deplibs" in
 
      *\ -l* | *\ -L*)
 
        func_warning "\`-l' and \`-L' are ignored for archives" ;;
 
      esac
 
 
 
      test -n "$rpath" && \
 
        func_warning "\`-rpath' is ignored for archives"
 
 
 
      test -n "$xrpath" && \
 
        func_warning "\`-R' is ignored for archives"
 
 
 
      test -n "$vinfo" && \
 
        func_warning "\`-version-info/-version-number' is ignored for archives"
 
 
 
      test -n "$release" && \
 
        func_warning "\`-release' is ignored for archives"
 
 
 
      test -n "$export_symbols$export_symbols_regex" && \
 
        func_warning "\`-export-symbols' is ignored for archives"
 
 
 
      # Now set the variables for building old libraries.
 
      build_libtool_libs=no
 
      oldlibs="$output"
 
      objs="$objs$old_deplibs"
 
      ;;
 
 
 
    lib)
 
      # Make sure we only generate libraries of the form `libNAME.la'.
 
      case $outputname in
 
      lib*)
 
        func_stripname 'lib' '.la' "$outputname"
 
        name=$func_stripname_result
 
        eval shared_ext=\"$shrext_cmds\"
 
        eval libname=\"$libname_spec\"
 
        ;;
 
      *)
 
        test "$module" = no && \
 
          func_fatal_help "libtool library \`$output' must begin with \`lib'"
 
 
 
        if test "$need_lib_prefix" != no; then
 
          # Add the "lib" prefix for modules if required
 
          func_stripname '' '.la' "$outputname"
 
          name=$func_stripname_result
 
          eval shared_ext=\"$shrext_cmds\"
 
          eval libname=\"$libname_spec\"
 
        else
 
          func_stripname '' '.la' "$outputname"
 
          libname=$func_stripname_result
 
        fi
 
        ;;
 
      esac
 
 
 
      if test -n "$objs"; then
 
        if test "$deplibs_check_method" != pass_all; then
 
          func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 
        else
 
          $ECHO
 
          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
 
          $ECHO "*** objects $objs is not portable!"
 
          libobjs="$libobjs $objs"
 
        fi
 
      fi
 
 
 
      test "$dlself" != no && \
 
        func_warning "\`-dlopen self' is ignored for libtool libraries"
 
 
 
      set dummy $rpath
 
      shift
 
      test "$#" -gt 1 && \
 
        func_warning "ignoring multiple \`-rpath's for a libtool library"
 
 
 
      install_libdir="$1"
 
 
 
      oldlibs=
 
      if test -z "$rpath"; then
 
        if test "$build_libtool_libs" = yes; then
 
          # Building a libtool convenience library.
 
          # Some compilers have problems with a `.al' extension so
 
          # convenience libraries should have the same extension an
 
          # archive normally would.
 
          oldlibs="$output_objdir/$libname.$libext $oldlibs"
 
          build_libtool_libs=convenience
 
          build_old_libs=yes
 
        fi
 
 
 
        test -n "$vinfo" && \
 
          func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
 
 
 
        test -n "$release" && \
 
          func_warning "\`-release' is ignored for convenience libraries"
 
      else
 
 
 
        # Parse the version information argument.
 
        save_ifs="$IFS"; IFS=':'
 
        set dummy $vinfo 0 0 0
 
        shift
 
        IFS="$save_ifs"
 
 
 
        test -n "$7" && \
 
          func_fatal_help "too many parameters to \`-version-info'"
 
 
 
        # convert absolute version numbers to libtool ages
 
        # this retains compatibility with .la files and attempts
 
        # to make the code below a bit more comprehensible
 
 
 
        case $vinfo_number in
 
        yes)
 
          number_major="$1"
 
          number_minor="$2"
 
          number_revision="$3"
 
          #
 
          # There are really only two kinds -- those that
 
          # use the current revision as the major version
 
          # and those that subtract age and use age as
 
          # a minor version.  But, then there is irix
 
          # which has an extra 1 added just for fun
 
          #
 
          case $version_type in
 
          darwin|linux|osf|windows|none)
 
            func_arith $number_major + $number_minor
 
            current=$func_arith_result
 
            age="$number_minor"
 
            revision="$number_revision"
 
            ;;
 
          freebsd-aout|freebsd-elf|sunos)
 
            current="$number_major"
 
            revision="$number_minor"
 
            age="0"
 
            ;;
 
          irix|nonstopux)
 
            func_arith $number_major + $number_minor
 
            current=$func_arith_result
 
            age="$number_minor"
 
            revision="$number_minor"
 
            lt_irix_increment=no
 
            ;;
 
          esac
 
          ;;
 
        no)
 
          current="$1"
 
          revision="$2"
 
          age="$3"
 
          ;;
 
        esac
 
 
 
        # Check that each of the things are valid numbers.
 
        case $current in
 
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 
        *)
 
          func_error "CURRENT \`$current' must be a nonnegative integer"
 
          func_fatal_error "\`$vinfo' is not valid version information"
 
          ;;
 
        esac
 
 
 
        case $revision in
 
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 
        *)
 
          func_error "REVISION \`$revision' must be a nonnegative integer"
 
          func_fatal_error "\`$vinfo' is not valid version information"
 
          ;;
 
        esac
 
 
 
        case $age in
 
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 
        *)
 
          func_error "AGE \`$age' must be a nonnegative integer"
 
          func_fatal_error "\`$vinfo' is not valid version information"
 
          ;;
 
        esac
 
 
 
        if test "$age" -gt "$current"; then
 
          func_error "AGE \`$age' is greater than the current interface number \`$current'"
 
          func_fatal_error "\`$vinfo' is not valid version information"
 
        fi
 
 
 
        # Calculate the version variables.
 
        major=
 
        versuffix=
 
        verstring=
 
        case $version_type in
 
        none) ;;
 
 
 
        darwin)
 
          # Like Linux, but with the current version available in
 
          # verstring for coding it into the library header
 
          func_arith $current - $age
 
          major=.$func_arith_result
 
          versuffix="$major.$age.$revision"
 
          # Darwin ld doesn't like 0 for these options...
 
          func_arith $current + 1
 
          minor_current=$func_arith_result
 
          xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 
          verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
 
          ;;
 
 
 
        freebsd-aout)
 
          major=".$current"
 
          versuffix=".$current.$revision";
 
          ;;
 
 
 
        freebsd-elf)
 
          major=".$current"
 
          versuffix=".$current"
 
          ;;
 
 
 
        irix | nonstopux)
 
          if test "X$lt_irix_increment" = "Xno"; then
 
            func_arith $current - $age
 
          else
 
            func_arith $current - $age + 1
 
          fi
 
          major=$func_arith_result
 
 
 
          case $version_type in
 
            nonstopux) verstring_prefix=nonstopux ;;
 
            *)         verstring_prefix=sgi ;;
 
          esac
 
          verstring="$verstring_prefix$major.$revision"
 
 
 
          # Add in all the interfaces that we are compatible with.
 
          loop=$revision
 
          while test "$loop" -ne 0; do
 
            func_arith $revision - $loop
 
            iface=$func_arith_result
 
            func_arith $loop - 1
 
            loop=$func_arith_result
 
            verstring="$verstring_prefix$major.$iface:$verstring"
 
          done
 
 
 
          # Before this point, $major must not contain `.'.
 
          major=.$major
 
          versuffix="$major.$revision"
 
          ;;
 
 
 
        linux)
 
          func_arith $current - $age
 
          major=.$func_arith_result
 
          versuffix="$major.$age.$revision"
 
          ;;
 
 
 
        osf)
 
          func_arith $current - $age
 
          major=.$func_arith_result
 
          versuffix=".$current.$age.$revision"
 
          verstring="$current.$age.$revision"
 
 
 
          # Add in all the interfaces that we are compatible with.
 
          loop=$age
 
          while test "$loop" -ne 0; do
 
            func_arith $current - $loop
 
            iface=$func_arith_result
 
            func_arith $loop - 1
 
            loop=$func_arith_result
 
            verstring="$verstring:${iface}.0"
 
          done
 
 
 
          # Make executables depend on our current version.
 
          verstring="$verstring:${current}.0"
 
          ;;
 
 
 
        qnx)
 
          major=".$current"
 
          versuffix=".$current"
 
          ;;
 
 
 
        sunos)
 
          major=".$current"
 
          versuffix=".$current.$revision"
 
          ;;
 
 
 
        windows)
 
          # Use '-' rather than '.', since we only want one
 
          # extension on DOS 8.3 filesystems.
 
          func_arith $current - $age
 
          major=$func_arith_result
 
          versuffix="-$major"
 
          ;;
 
 
 
        *)
 
          func_fatal_configuration "unknown library version type \`$version_type'"
 
          ;;
 
        esac
 
 
 
        # Clear the version info if we defaulted, and they specified a release.
 
        if test -z "$vinfo" && test -n "$release"; then
 
          major=
 
          case $version_type in
 
          darwin)
 
            # we can't check for "0.0" in archive_cmds due to quoting
 
            # problems, so we reset it completely
 
            verstring=
 
            ;;
 
          *)
 
            verstring="0.0"
 
            ;;
 
          esac
 
          if test "$need_version" = no; then
 
            versuffix=
 
          else
 
            versuffix=".0.0"
 
          fi
 
        fi
 
 
 
        # Remove version info from name if versioning should be avoided
 
        if test "$avoid_version" = yes && test "$need_version" = no; then
 
          major=
 
          versuffix=
 
          verstring=""
 
        fi
 
 
 
        # Check to see if the archive will have undefined symbols.
 
        if test "$allow_undefined" = yes; then
 
          if test "$allow_undefined_flag" = unsupported; then
 
            func_warning "undefined symbols not allowed in $host shared libraries"
 
            build_libtool_libs=no
 
            build_old_libs=yes
 
          fi
 
        else
 
          # Don't allow undefined symbols.
 
          allow_undefined_flag="$no_undefined_flag"
 
        fi
 
 
 
      fi
 
 
 
      func_generate_dlsyms "$libname" "$libname" "yes"
 
      libobjs="$libobjs $symfileobj"
 
      test "X$libobjs" = "X " && libobjs=
 
 
 
      if test "$mode" != relink; then
 
        # Remove our outputs, but don't remove object files since they
 
        # may have been created when compiling PIC objects.
 
        removelist=
 
        tempremovelist=`$ECHO "$output_objdir/*"`
 
        for p in $tempremovelist; do
 
          case $p in
 
            *.$objext | *.gcno)
 
               ;;
 
            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
 
               if test "X$precious_files_regex" != "X"; then
 
                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
 
                 then
 
                   continue
 
                 fi
 
               fi
 
               removelist="$removelist $p"
 
               ;;
 
            *) ;;
 
          esac
 
        done
 
        test -n "$removelist" && \
 
          func_show_eval "${RM}r \$removelist"
 
      fi
 
 
 
      # Now set the variables for building old libraries.
 
      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
 
        oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
 
 
        # Transform .lo files to .o files.
 
        oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
 
      fi
 
 
 
      # Eliminate all temporary directories.
 
      #for path in $notinst_path; do
 
      # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
 
      # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
 
      # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
 
      #done
 
 
 
      if test -n "$xrpath"; then
 
        # If the user specified any rpath flags, then add them.
 
        temp_xrpath=
 
        for libdir in $xrpath; do
 
          temp_xrpath="$temp_xrpath -R$libdir"
 
          case "$finalize_rpath " in
 
          *" $libdir "*) ;;
 
          *) finalize_rpath="$finalize_rpath $libdir" ;;
 
          esac
 
        done
 
        if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
 
          dependency_libs="$temp_xrpath $dependency_libs"
 
        fi
 
      fi
 
 
 
      # Make sure dlfiles contains only unique files that won't be dlpreopened
 
      old_dlfiles="$dlfiles"
 
      dlfiles=
 
      for lib in $old_dlfiles; do
 
        case " $dlprefiles $dlfiles " in
 
        *" $lib "*) ;;
 
        *) dlfiles="$dlfiles $lib" ;;
 
        esac
 
      done
 
 
 
      # Make sure dlprefiles contains only unique files
 
      old_dlprefiles="$dlprefiles"
 
      dlprefiles=
 
      for lib in $old_dlprefiles; do
 
        case "$dlprefiles " in
 
        *" $lib "*) ;;
 
        *) dlprefiles="$dlprefiles $lib" ;;
 
        esac
 
      done
 
 
 
      if test "$build_libtool_libs" = yes; then
 
        if test -n "$rpath"; then
 
          case $host in
 
          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
 
            # these systems don't actually have a c library (as such)!
 
            ;;
 
          *-*-rhapsody* | *-*-darwin1.[012])
 
            # Rhapsody C library is in the System framework
 
            deplibs="$deplibs System.ltframework"
 
            ;;
 
          *-*-netbsd*)
 
            # Don't link with libc until the a.out ld.so is fixed.
 
            ;;
 
          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 
            # Do not include libc due to us having libc/libc_r.
 
            ;;
 
          *-*-sco3.2v5* | *-*-sco5v6*)
 
            # Causes problems with __ctype
 
            ;;
 
          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 
            # Compiler inserts libc in the correct place for threads to work
 
            ;;
 
          *)
 
            # Add libc to deplibs on all other systems if necessary.
 
            if test "$build_libtool_need_lc" = "yes"; then
 
              deplibs="$deplibs -lc"
 
            fi
 
            ;;
 
          esac
 
        fi
 
 
 
        # Transform deplibs into only deplibs that can be linked in shared.
 
        name_save=$name
 
        libname_save=$libname
 
        release_save=$release
 
        versuffix_save=$versuffix
 
        major_save=$major
 
        # I'm not sure if I'm treating the release correctly.  I think
 
        # release should show up in the -l (ie -lgmp5) so we don't want to
 
        # add it in twice.  Is that correct?
 
        release=""
 
        versuffix=""
 
        major=""
 
        newdeplibs=
 
        droppeddeps=no
 
        case $deplibs_check_method in
 
        pass_all)
 
          # Don't check for shared/static.  Everything works.
 
          # This might be a little naive.  We might want to check
 
          # whether the library exists or not.  But this is on
 
          # osf3 & osf4 and I'm not really sure... Just
 
          # implementing what was already the behavior.
 
          newdeplibs=$deplibs
 
          ;;
 
        test_compile)
 
          # This code stresses the "libraries are programs" paradigm to its
 
          # limits. Maybe even breaks it.  We compile a program, linking it
 
          # against the deplibs as a proxy for the library.  Then we can check
 
          # whether they linked in statically or dynamically with ldd.
 
          $opt_dry_run || $RM conftest.c
 
          cat > conftest.c <<EOF
 
          int main() { return 0; }
 
EOF
 
          $opt_dry_run || $RM conftest
 
          if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
 
            ldd_output=`ldd conftest`
 
            for i in $deplibs; do
 
              case $i in
 
              -l*)
 
                func_stripname -l '' "$i"
 
                name=$func_stripname_result
 
                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 
                  case " $predeps $postdeps " in
 
                  *" $i "*)
 
                    newdeplibs="$newdeplibs $i"
 
                    i=""
 
                    ;;
 
                  esac
 
                fi
 
                if test -n "$i" ; then
 
                  libname=`eval "\\$ECHO \"$libname_spec\""`
 
                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 
                  set dummy $deplib_matches; shift
 
                  deplib_match=$1
 
                  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 
                    newdeplibs="$newdeplibs $i"
 
                  else
 
                    droppeddeps=yes
 
                    $ECHO
 
                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
 
                    $ECHO "*** I have the capability to make that library automatically link in when"
 
                    $ECHO "*** you link to this library.  But I can only do this if you have a"
 
                    $ECHO "*** shared version of the library, which I believe you do not have"
 
                    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
 
                    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
 
                  fi
 
                fi
 
                ;;
 
              *)
 
                newdeplibs="$newdeplibs $i"
 
                ;;
 
              esac
 
            done
 
          else
 
            # Error occurred in the first compile.  Let's try to salvage
 
            # the situation: Compile a separate program for each library.
 
            for i in $deplibs; do
 
              case $i in
 
              -l*)
 
                func_stripname -l '' "$i"
 
                name=$func_stripname_result
 
                $opt_dry_run || $RM conftest
 
                if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 
                  ldd_output=`ldd conftest`
 
                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 
                    case " $predeps $postdeps " in
 
                    *" $i "*)
 
                      newdeplibs="$newdeplibs $i"
 
                      i=""
 
                      ;;
 
                    esac
 
                  fi
 
                  if test -n "$i" ; then
 
                    libname=`eval "\\$ECHO \"$libname_spec\""`
 
                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 
                    set dummy $deplib_matches; shift
 
                    deplib_match=$1
 
                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 
                      newdeplibs="$newdeplibs $i"
 
                    else
 
                      droppeddeps=yes
 
                      $ECHO
 
                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
 
                      $ECHO "*** I have the capability to make that library automatically link in when"
 
                      $ECHO "*** you link to this library.  But I can only do this if you have a"
 
                      $ECHO "*** shared version of the library, which you do not appear to have"
 
                      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
 
                      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
 
                    fi
 
                  fi
 
                else
 
                  droppeddeps=yes
 
                  $ECHO
 
                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
 
                  $ECHO "*** make it link in!  You will probably need to install it or some"
 
                  $ECHO "*** library that it depends on before this library will be fully"
 
                  $ECHO "*** functional.  Installing it before continuing would be even better."
 
                fi
 
                ;;
 
              *)
 
                newdeplibs="$newdeplibs $i"
 
                ;;
 
              esac
 
            done
 
          fi
 
          ;;
 
        file_magic*)
 
          set dummy $deplibs_check_method; shift
 
          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 
          for a_deplib in $deplibs; do
 
            case $a_deplib in
 
            -l*)
 
              func_stripname -l '' "$a_deplib"
 
              name=$func_stripname_result
 
              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 
                case " $predeps $postdeps " in
 
                *" $a_deplib "*)
 
                  newdeplibs="$newdeplibs $a_deplib"
 
                  a_deplib=""
 
                  ;;
 
                esac
 
              fi
 
              if test -n "$a_deplib" ; then
 
                libname=`eval "\\$ECHO \"$libname_spec\""`
 
                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 
                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 
                  for potent_lib in $potential_libs; do
 
                      # Follow soft links.
 
                      if ls -lLd "$potent_lib" 2>/dev/null |
 
                         $GREP " -> " >/dev/null; then
 
                        continue
 
                      fi
 
                      # The statement above tries to avoid entering an
 
                      # endless loop below, in case of cyclic links.
 
                      # We might still enter an endless loop, since a link
 
                      # loop can be closed while we follow links,
 
                      # but so what?
 
                      potlib="$potent_lib"
 
                      while test -h "$potlib" 2>/dev/null; do
 
                        potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 
                        case $potliblink in
 
                        [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
 
                        *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 
                        esac
 
                      done
 
                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
 
                         $SED -e 10q |
 
                         $EGREP "$file_magic_regex" > /dev/null; then
 
                        newdeplibs="$newdeplibs $a_deplib"
 
                        a_deplib=""
 
                        break 2
 
                      fi
 
                  done
 
                done
 
              fi
 
              if test -n "$a_deplib" ; then
 
                droppeddeps=yes
 
                $ECHO
 
                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
 
                $ECHO "*** I have the capability to make that library automatically link in when"
 
                $ECHO "*** you link to this library.  But I can only do this if you have a"
 
                $ECHO "*** shared version of the library, which you do not appear to have"
 
                $ECHO "*** because I did check the linker path looking for a file starting"
 
                if test -z "$potlib" ; then
 
                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 
                else
 
                  $ECHO "*** with $libname and none of the candidates passed a file format test"
 
                  $ECHO "*** using a file magic. Last file checked: $potlib"
 
                fi
 
              fi
 
              ;;
 
            *)
 
              # Add a -L argument.
 
              newdeplibs="$newdeplibs $a_deplib"
 
              ;;
 
            esac
 
          done # Gone through all deplibs.
 
          ;;
 
        match_pattern*)
 
          set dummy $deplibs_check_method; shift
 
          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 
          for a_deplib in $deplibs; do
 
            case $a_deplib in
 
            -l*)
 
              func_stripname -l '' "$a_deplib"
 
              name=$func_stripname_result
 
              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 
                case " $predeps $postdeps " in
 
                *" $a_deplib "*)
 
                  newdeplibs="$newdeplibs $a_deplib"
 
                  a_deplib=""
 
                  ;;
 
                esac
 
              fi
 
              if test -n "$a_deplib" ; then
 
                libname=`eval "\\$ECHO \"$libname_spec\""`
 
                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 
                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 
                  for potent_lib in $potential_libs; do
 
                    potlib="$potent_lib" # see symlink-check above in file_magic test
 
                    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
 
                       $EGREP "$match_pattern_regex" > /dev/null; then
 
                      newdeplibs="$newdeplibs $a_deplib"
 
                      a_deplib=""
 
                      break 2
 
                    fi
 
                  done
 
                done
 
              fi
 
              if test -n "$a_deplib" ; then
 
                droppeddeps=yes
 
                $ECHO
 
                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
 
                $ECHO "*** I have the capability to make that library automatically link in when"
 
                $ECHO "*** you link to this library.  But I can only do this if you have a"
 
                $ECHO "*** shared version of the library, which you do not appear to have"
 
                $ECHO "*** because I did check the linker path looking for a file starting"
 
                if test -z "$potlib" ; then
 
                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 
                else
 
                  $ECHO "*** with $libname and none of the candidates passed a file format test"
 
                  $ECHO "*** using a regex pattern. Last file checked: $potlib"
 
                fi
 
              fi
 
              ;;
 
            *)
 
              # Add a -L argument.
 
              newdeplibs="$newdeplibs $a_deplib"
 
              ;;
 
            esac
 
          done # Gone through all deplibs.
 
          ;;
 
        none | unknown | *)
 
          newdeplibs=""
 
          tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
 
              -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
 
          if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 
            for i in $predeps $postdeps ; do
 
              # can't use Xsed below, because $i might contain '/'
 
              tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
 
            done
 
          fi
 
          if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[      ]//g' |
 
             $GREP . >/dev/null; then
 
            $ECHO
 
            if test "X$deplibs_check_method" = "Xnone"; then
 
              $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
 
            else
 
              $ECHO "*** Warning: inter-library dependencies are not known to be supported."
 
            fi
 
            $ECHO "*** All declared inter-library dependencies are being dropped."
 
            droppeddeps=yes
 
          fi
 
          ;;
 
        esac
 
        versuffix=$versuffix_save
 
        major=$major_save
 
        release=$release_save
 
        libname=$libname_save
 
        name=$name_save
 
 
 
        case $host in
 
        *-*-rhapsody* | *-*-darwin1.[012])
 
          # On Rhapsody replace the C library with the System framework
 
          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 
          ;;
 
        esac
 
 
 
        if test "$droppeddeps" = yes; then
 
          if test "$module" = yes; then
 
            $ECHO
 
            $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
 
            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
 
            $ECHO "*** a static module, that should work as long as the dlopening"
 
            $ECHO "*** application is linked with the -dlopen flag."
 
            if test -z "$global_symbol_pipe"; then
 
              $ECHO
 
              $ECHO "*** However, this would only work if libtool was able to extract symbol"
 
              $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
 
              $ECHO "*** not find such a program.  So, this module is probably useless."
 
              $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 
            fi
 
            if test "$build_old_libs" = no; then
 
              oldlibs="$output_objdir/$libname.$libext"
 
              build_libtool_libs=module
 
              build_old_libs=yes
 
            else
 
              build_libtool_libs=no
 
            fi
 
          else
 
            $ECHO "*** The inter-library dependencies that have been dropped here will be"
 
            $ECHO "*** automatically added whenever a program is linked with this library"
 
            $ECHO "*** or is declared to -dlopen it."
 
 
 
            if test "$allow_undefined" = no; then
 
              $ECHO
 
              $ECHO "*** Since this library must not contain undefined symbols,"
 
              $ECHO "*** because either the platform does not support them or"
 
              $ECHO "*** it was explicitly requested with -no-undefined,"
 
              $ECHO "*** libtool will only create a static version of it."
 
              if test "$build_old_libs" = no; then
 
                oldlibs="$output_objdir/$libname.$libext"
 
                build_libtool_libs=module
 
                build_old_libs=yes
 
              else
 
                build_libtool_libs=no
 
              fi
 
            fi
 
          fi
 
        fi
 
        # Done checking deplibs!
 
        deplibs=$newdeplibs
 
      fi
 
      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
 
      case $host in
 
        *-*-darwin*)
 
          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 
          new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 
          deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 
          ;;
 
      esac
 
 
 
      # move library search paths that coincide with paths to not yet
 
      # installed libraries to the beginning of the library search list
 
      new_libs=
 
      for path in $notinst_path; do
 
        case " $new_libs " in
 
        *" -L$path/$objdir "*) ;;
 
        *)
 
          case " $deplibs " in
 
          *" -L$path/$objdir "*)
 
            new_libs="$new_libs -L$path/$objdir" ;;
 
          esac
 
          ;;
 
        esac
 
      done
 
      for deplib in $deplibs; do
 
        case $deplib in
 
        -L*)
 
          case " $new_libs " in
 
          *" $deplib "*) ;;
 
          *) new_libs="$new_libs $deplib" ;;
 
          esac
 
          ;;
 
        *) new_libs="$new_libs $deplib" ;;
 
        esac
 
      done
 
      deplibs="$new_libs"
 
 
 
      # All the library-specific variables (install_libdir is set above).
 
      library_names=
 
      old_library=
 
      dlname=
 
 
 
      # Test again, we may have decided not to build it any more
 
      if test "$build_libtool_libs" = yes; then
 
        if test "$hardcode_into_libs" = yes; then
 
          # Hardcode the library paths
 
          hardcode_libdirs=
 
          dep_rpath=
 
          rpath="$finalize_rpath"
 
          test "$mode" != relink && rpath="$compile_rpath$rpath"
 
          for libdir in $rpath; do
 
            if test -n "$hardcode_libdir_flag_spec"; then
 
              if test -n "$hardcode_libdir_separator"; then
 
                if test -z "$hardcode_libdirs"; then
 
                  hardcode_libdirs="$libdir"
 
                else
 
                  # Just accumulate the unique libdirs.
 
                  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 
                  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 
                    ;;
 
                  *)
 
                    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
 
                    ;;
 
                  esac
 
                fi
 
              else
 
                eval flag=\"$hardcode_libdir_flag_spec\"
 
                dep_rpath="$dep_rpath $flag"
 
              fi
 
            elif test -n "$runpath_var"; then
 
              case "$perm_rpath " in
 
              *" $libdir "*) ;;
 
              *) perm_rpath="$perm_rpath $libdir" ;;
 
              esac
 
            fi
 
          done
 
          # Substitute the hardcoded libdirs into the rpath.
 
          if test -n "$hardcode_libdir_separator" &&
 
             test -n "$hardcode_libdirs"; then
 
            libdir="$hardcode_libdirs"
 
            if test -n "$hardcode_libdir_flag_spec_ld"; then
 
              eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
 
            else
 
              eval dep_rpath=\"$hardcode_libdir_flag_spec\"
 
            fi
 
          fi
 
          if test -n "$runpath_var" && test -n "$perm_rpath"; then
 
            # We should set the runpath_var.
 
            rpath=
 
            for dir in $perm_rpath; do
 
              rpath="$rpath$dir:"
 
            done
 
            eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
 
          fi
 
          test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
 
        fi
 
 
 
        shlibpath="$finalize_shlibpath"
 
        test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
 
        if test -n "$shlibpath"; then
 
          eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
 
        fi
 
 
 
        # Get the real and link names of the library.
 
        eval shared_ext=\"$shrext_cmds\"
 
        eval library_names=\"$library_names_spec\"
 
        set dummy $library_names
 
        shift
 
        realname="$1"
 
        shift
 
 
 
        if test -n "$soname_spec"; then
 
          eval soname=\"$soname_spec\"
 
        else
 
          soname="$realname"
 
        fi
 
        if test -z "$dlname"; then
 
          dlname=$soname
 
        fi
 
 
 
        lib="$output_objdir/$realname"
 
        linknames=
 
        for link
 
        do
 
          linknames="$linknames $link"
 
        done
 
 
 
        # Use standard objects if they are pic
 
        test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 
        test "X$libobjs" = "X " && libobjs=
 
 
 
        delfiles=
 
        if test -n "$export_symbols" && test -n "$include_expsyms"; then
 
          $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
 
          export_symbols="$output_objdir/$libname.uexp"
 
          delfiles="$delfiles $export_symbols"
 
        fi
 
 
 
        orig_export_symbols=
 
        case $host_os in
 
        cygwin* | mingw* | cegcc*)
 
          if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
 
            # exporting using user supplied symfile
 
            if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
 
              # and it's NOT already a .def file. Must figure out
 
              # which of the given symbols are data symbols and tag
 
              # them as such. So, trigger use of export_symbols_cmds.
 
              # export_symbols gets reassigned inside the "prepare
 
              # the list of exported symbols" if statement, so the
 
              # include_expsyms logic still works.
 
              orig_export_symbols="$export_symbols"
 
              export_symbols=
 
              always_export_symbols=yes
 
            fi
 
          fi
 
          ;;
 
        esac
 
 
 
        # Prepare the list of exported symbols
 
        if test -z "$export_symbols"; then
 
          if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
 
            func_verbose "generating symbol list for \`$libname.la'"
 
            export_symbols="$output_objdir/$libname.exp"
 
            $opt_dry_run || $RM $export_symbols
 
            cmds=$export_symbols_cmds
 
            save_ifs="$IFS"; IFS='~'
 
            for cmd in $cmds; do
 
              IFS="$save_ifs"
 
              eval cmd=\"$cmd\"
 
              func_len " $cmd"
 
              len=$func_len_result
 
              if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 
                func_show_eval "$cmd" 'exit $?'
 
                skipped_export=false
 
              else
 
                # The command line is too long to execute in one step.
 
                func_verbose "using reloadable object file for export list..."
 
                skipped_export=:
 
                # Break out early, otherwise skipped_export may be
 
                # set to false by a later but shorter cmd.
 
                break
 
              fi
 
            done
 
            IFS="$save_ifs"
 
            if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
 
              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 
              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 
            fi
 
          fi
 
        fi
 
 
 
        if test -n "$export_symbols" && test -n "$include_expsyms"; then
 
          tmp_export_symbols="$export_symbols"
 
          test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
 
          $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
 
        fi
 
 
 
        if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
 
          # The given exports_symbols file has to be filtered, so filter it.
 
          func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
 
          # FIXME: $output_objdir/$libname.filter potentially contains lots of
 
          # 's' commands which not all seds can handle. GNU sed should be fine
 
          # though. Also, the filter scales superlinearly with the number of
 
          # global variables. join(1) would be nice here, but unfortunately
 
          # isn't a blessed tool.
 
          $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
 
          delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
 
          export_symbols=$output_objdir/$libname.def
 
          $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 
        fi
 
 
 
        tmp_deplibs=
 
        for test_deplib in $deplibs; do
 
          case " $convenience " in
 
          *" $test_deplib "*) ;;
 
          *)
 
            tmp_deplibs="$tmp_deplibs $test_deplib"
 
            ;;
 
          esac
 
        done
 
        deplibs="$tmp_deplibs"
 
 
 
        if test -n "$convenience"; then
 
          if test -n "$whole_archive_flag_spec" &&
 
            test "$compiler_needs_object" = yes &&
 
            test -z "$libobjs"; then
 
            # extract the archives, so we have objects to list.
 
            # TODO: could optimize this to just extract one archive.
 
            whole_archive_flag_spec=
 
          fi
 
          if test -n "$whole_archive_flag_spec"; then
 
            save_libobjs=$libobjs
 
            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 
            test "X$libobjs" = "X " && libobjs=
 
          else
 
            gentop="$output_objdir/${outputname}x"
 
            generated="$generated $gentop"
 
 
 
            func_extract_archives $gentop $convenience
 
            libobjs="$libobjs $func_extract_archives_result"
 
            test "X$libobjs" = "X " && libobjs=
 
          fi
 
        fi
 
 
 
        if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 
          eval flag=\"$thread_safe_flag_spec\"
 
          linker_flags="$linker_flags $flag"
 
        fi
 
 
 
        # Make a backup of the uninstalled library when relinking
 
        if test "$mode" = relink; then
 
          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 
        fi
 
 
 
        # Do each of the archive commands.
 
        if test "$module" = yes && test -n "$module_cmds" ; then
 
          if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 
            eval test_cmds=\"$module_expsym_cmds\"
 
            cmds=$module_expsym_cmds
 
          else
 
            eval test_cmds=\"$module_cmds\"
 
            cmds=$module_cmds
 
          fi
 
        else
 
          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
 
            eval test_cmds=\"$archive_expsym_cmds\"
 
            cmds=$archive_expsym_cmds
 
          else
 
            eval test_cmds=\"$archive_cmds\"
 
            cmds=$archive_cmds
 
          fi
 
        fi
 
 
 
        if test "X$skipped_export" != "X:" &&
 
           func_len " $test_cmds" &&
 
           len=$func_len_result &&
 
           test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 
          :
 
        else
 
          # The command line is too long to link in one step, link piecewise
 
          # or, if using GNU ld and skipped_export is not :, use a linker
 
          # script.
 
 
 
          # Save the value of $output and $libobjs because we want to
 
          # use them later.  If we have whole_archive_flag_spec, we
 
          # want to use save_libobjs as it was before
 
          # whole_archive_flag_spec was expanded, because we can't
 
          # assume the linker understands whole_archive_flag_spec.
 
          # This may have to be revisited, in case too many
 
          # convenience libraries get linked in and end up exceeding
 
          # the spec.
 
          if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
 
            save_libobjs=$libobjs
 
          fi
 
          save_output=$output
 
          output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 
 
 
          # Clear the reloadable object creation command queue and
 
          # initialize k to one.
 
          test_cmds=
 
          concat_cmds=
 
          objlist=
 
          last_robj=
 
          k=1
 
 
 
          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
 
            output=${output_objdir}/${output_la}.lnkscript
 
            func_verbose "creating GNU ld script: $output"
 
            $ECHO 'INPUT (' > $output
 
            for obj in $save_libobjs
 
            do
 
              $ECHO "$obj" >> $output
 
            done
 
            $ECHO ')' >> $output
 
            delfiles="$delfiles $output"
 
          elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
 
            output=${output_objdir}/${output_la}.lnk
 
            func_verbose "creating linker input file list: $output"
 
            : > $output
 
            set x $save_libobjs
 
            shift
 
            firstobj=
 
            if test "$compiler_needs_object" = yes; then
 
              firstobj="$1 "
 
              shift
 
            fi
 
            for obj
 
            do
 
              $ECHO "$obj" >> $output
 
            done
 
            delfiles="$delfiles $output"
 
            output=$firstobj\"$file_list_spec$output\"
 
          else
 
            if test -n "$save_libobjs"; then
 
              func_verbose "creating reloadable object files..."
 
              output=$output_objdir/$output_la-${k}.$objext
 
              eval test_cmds=\"$reload_cmds\"
 
              func_len " $test_cmds"
 
              len0=$func_len_result
 
              len=$len0
 
 
 
              # Loop over the list of objects to be linked.
 
              for obj in $save_libobjs
 
              do
 
                func_len " $obj"
 
                func_arith $len + $func_len_result
 
                len=$func_arith_result
 
                if test "X$objlist" = X ||
 
                   test "$len" -lt "$max_cmd_len"; then
 
                  func_append objlist " $obj"
 
                else
 
                  # The command $test_cmds is almost too long, add a
 
                  # command to the queue.
 
                  if test "$k" -eq 1 ; then
 
                    # The first file doesn't have a previous command to add.
 
                    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
 
                  else
 
                    # All subsequent reloadable object files will link in
 
                    # the last one created.
 
                    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
 
                  fi
 
                  last_robj=$output_objdir/$output_la-${k}.$objext
 
                  func_arith $k + 1
 
                  k=$func_arith_result
 
                  output=$output_objdir/$output_la-${k}.$objext
 
                  objlist=$obj
 
                  func_len " $last_robj"
 
                  func_arith $len0 + $func_len_result
 
                  len=$func_arith_result
 
                fi
 
              done
 
              # Handle the remaining objects by creating one last
 
              # reloadable object file.  All subsequent reloadable object
 
              # files will link in the last one created.
 
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 
              eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
 
              if test -n "$last_robj"; then
 
                eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
 
              fi
 
              delfiles="$delfiles $output"
 
 
 
            else
 
              output=
 
            fi
 
 
 
            if ${skipped_export-false}; then
 
              func_verbose "generating symbol list for \`$libname.la'"
 
              export_symbols="$output_objdir/$libname.exp"
 
              $opt_dry_run || $RM $export_symbols
 
              libobjs=$output
 
              # Append the command to create the export file.
 
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 
              eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
 
              if test -n "$last_robj"; then
 
                eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 
              fi
 
            fi
 
 
 
            test -n "$save_libobjs" &&
 
              func_verbose "creating a temporary reloadable object file: $output"
 
 
 
            # Loop through the commands generated above and execute them.
 
            save_ifs="$IFS"; IFS='~'
 
            for cmd in $concat_cmds; do
 
              IFS="$save_ifs"
 
              $opt_silent || {
 
                  func_quote_for_expand "$cmd"
 
                  eval "func_echo $func_quote_for_expand_result"
 
              }
 
              $opt_dry_run || eval "$cmd" || {
 
                lt_exit=$?
 
 
 
                # Restore the uninstalled library and exit
 
                if test "$mode" = relink; then
 
                  ( cd "$output_objdir" && \
 
                    $RM "${realname}T" && \
 
                    $MV "${realname}U" "$realname" )
 
                fi
 
 
 
                exit $lt_exit
 
              }
 
            done
 
            IFS="$save_ifs"
 
 
 
            if test -n "$export_symbols_regex" && ${skipped_export-false}; then
 
              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 
              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 
            fi
 
          fi
 
 
 
          if ${skipped_export-false}; then
 
            if test -n "$export_symbols" && test -n "$include_expsyms"; then
 
              tmp_export_symbols="$export_symbols"
 
              test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
 
              $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
 
            fi
 
 
 
            if test -n "$orig_export_symbols"; then
 
              # The given exports_symbols file has to be filtered, so filter it.
 
              func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
 
              # FIXME: $output_objdir/$libname.filter potentially contains lots of
 
              # 's' commands which not all seds can handle. GNU sed should be fine
 
              # though. Also, the filter scales superlinearly with the number of
 
              # global variables. join(1) would be nice here, but unfortunately
 
              # isn't a blessed tool.
 
              $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
 
              delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
 
              export_symbols=$output_objdir/$libname.def
 
              $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 
            fi
 
          fi
 
 
 
          libobjs=$output
 
          # Restore the value of output.
 
          output=$save_output
 
 
 
          if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
 
            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 
            test "X$libobjs" = "X " && libobjs=
 
          fi
 
          # Expand the library linking commands again to reset the
 
          # value of $libobjs for piecewise linking.
 
 
 
          # Do each of the archive commands.
 
          if test "$module" = yes && test -n "$module_cmds" ; then
 
            if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 
              cmds=$module_expsym_cmds
 
            else
 
              cmds=$module_cmds
 
            fi
 
          else
 
            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
 
              cmds=$archive_expsym_cmds
 
            else
 
              cmds=$archive_cmds
 
            fi
 
          fi
 
        fi
 
 
 
        if test -n "$delfiles"; then
 
          # Append the command to remove temporary files to $cmds.
 
          eval cmds=\"\$cmds~\$RM $delfiles\"
 
        fi
 
 
 
        # Add any objects from preloaded convenience libraries
 
        if test -n "$dlprefiles"; then
 
          gentop="$output_objdir/${outputname}x"
 
          generated="$generated $gentop"
 
 
 
          func_extract_archives $gentop $dlprefiles
 
          libobjs="$libobjs $func_extract_archives_result"
 
          test "X$libobjs" = "X " && libobjs=
 
        fi
 
 
 
        save_ifs="$IFS"; IFS='~'
 
        for cmd in $cmds; do
 
          IFS="$save_ifs"
 
          eval cmd=\"$cmd\"
 
          $opt_silent || {
 
            func_quote_for_expand "$cmd"
 
            eval "func_echo $func_quote_for_expand_result"
 
          }
 
          $opt_dry_run || eval "$cmd" || {
 
            lt_exit=$?
 
 
 
            # Restore the uninstalled library and exit
 
            if test "$mode" = relink; then
 
              ( cd "$output_objdir" && \
 
                $RM "${realname}T" && \
 
                $MV "${realname}U" "$realname" )
 
            fi
 
 
 
            exit $lt_exit
 
          }
 
        done
 
        IFS="$save_ifs"
 
 
 
        # Restore the uninstalled library and exit
 
        if test "$mode" = relink; then
 
          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 
 
          if test -n "$convenience"; then
 
            if test -z "$whole_archive_flag_spec"; then
 
              func_show_eval '${RM}r "$gentop"'
 
            fi
 
          fi
 
 
 
          exit $EXIT_SUCCESS
 
        fi
 
 
 
        # Create links to the real library.
 
        for linkname in $linknames; do
 
          if test "$realname" != "$linkname"; then
 
            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
 
          fi
 
        done
 
 
 
        # If -module or -export-dynamic was specified, set the dlname.
 
        if test "$module" = yes || test "$export_dynamic" = yes; then
 
          # On all known operating systems, these are identical.
 
          dlname="$soname"
 
        fi
 
      fi
 
      ;;
 
 
 
    obj)
 
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 
        func_warning "\`-dlopen' is ignored for objects"
 
      fi
 
 
 
      case " $deplibs" in
 
      *\ -l* | *\ -L*)
 
        func_warning "\`-l' and \`-L' are ignored for objects" ;;
 
      esac
 
 
 
      test -n "$rpath" && \
 
        func_warning "\`-rpath' is ignored for objects"
 
 
 
      test -n "$xrpath" && \
 
        func_warning "\`-R' is ignored for objects"
 
 
 
      test -n "$vinfo" && \
 
        func_warning "\`-version-info' is ignored for objects"
 
 
 
      test -n "$release" && \
 
        func_warning "\`-release' is ignored for objects"
 
 
 
      case $output in
 
      *.lo)
 
        test -n "$objs$old_deplibs" && \
 
          func_fatal_error "cannot build library object \`$output' from non-libtool objects"
 
 
 
        libobj=$output
 
        func_lo2o "$libobj"
 
        obj=$func_lo2o_result
 
        ;;
 
      *)
 
        libobj=
 
        obj="$output"
 
        ;;
 
      esac
 
 
 
      # Delete the old objects.
 
      $opt_dry_run || $RM $obj $libobj
 
 
 
      # Objects from convenience libraries.  This assumes
 
      # single-version convenience libraries.  Whenever we create
 
      # different ones for PIC/non-PIC, this we'll have to duplicate
 
      # the extraction.
 
      reload_conv_objs=
 
      gentop=
 
      # reload_cmds runs $LD directly, so let us get rid of
 
      # -Wl from whole_archive_flag_spec and hope we can get by with
 
      # turning comma into space..
 
      wl=
 
 
 
      if test -n "$convenience"; then
 
        if test -n "$whole_archive_flag_spec"; then
 
          eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
 
          reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 
        else
 
          gentop="$output_objdir/${obj}x"
 
          generated="$generated $gentop"
 
 
 
          func_extract_archives $gentop $convenience
 
          reload_conv_objs="$reload_objs $func_extract_archives_result"
 
        fi
 
      fi
 
 
 
      # Create the old-style object.
 
      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
 
 
      output="$obj"
 
      func_execute_cmds "$reload_cmds" 'exit $?'
 
 
 
      # Exit if we aren't doing a library object file.
 
      if test -z "$libobj"; then
 
        if test -n "$gentop"; then
 
          func_show_eval '${RM}r "$gentop"'
 
        fi
 
 
 
        exit $EXIT_SUCCESS
 
      fi
 
 
 
      if test "$build_libtool_libs" != yes; then
 
        if test -n "$gentop"; then
 
          func_show_eval '${RM}r "$gentop"'
 
        fi
 
 
 
        # Create an invalid libtool object if no PIC, so that we don't
 
        # accidentally link it into a program.
 
        # $show "echo timestamp > $libobj"
 
        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
 
        exit $EXIT_SUCCESS
 
      fi
 
 
 
      if test -n "$pic_flag" || test "$pic_mode" != default; then
 
        # Only do commands if we really have different PIC objects.
 
        reload_objs="$libobjs $reload_conv_objs"
 
        output="$libobj"
 
        func_execute_cmds "$reload_cmds" 'exit $?'
 
      fi
 
 
 
      if test -n "$gentop"; then
 
        func_show_eval '${RM}r "$gentop"'
 
      fi
 
 
 
      exit $EXIT_SUCCESS
 
      ;;
 
 
 
    prog)
 
      case $host in
 
        *cygwin*) func_stripname '' '.exe' "$output"
 
                  output=$func_stripname_result.exe;;
 
      esac
 
      test -n "$vinfo" && \
 
        func_warning "\`-version-info' is ignored for programs"
 
 
 
      test -n "$release" && \
 
        func_warning "\`-release' is ignored for programs"
 
 
 
      test "$preload" = yes \
 
        && test "$dlopen_support" = unknown \
 
        && test "$dlopen_self" = unknown \
 
        && test "$dlopen_self_static" = unknown && \
 
          func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
 
 
 
      case $host in
 
      *-*-rhapsody* | *-*-darwin1.[012])
 
        # On Rhapsody replace the C library is the System framework
 
        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 
        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 
        ;;
 
      esac
 
 
 
      case $host in
 
      *-*-darwin*)
 
        # Don't allow lazy linking, it breaks C++ global constructors
 
        # But is supposedly fixed on 10.4 or later (yay!).
 
        if test "$tagname" = CXX ; then
 
          case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
 
            10.[0123])
 
              compile_command="$compile_command ${wl}-bind_at_load"
 
              finalize_command="$finalize_command ${wl}-bind_at_load"
 
            ;;
 
          esac
 
        fi
 
        # Time to change all our "foo.ltframework" stuff back to "-framework foo"
 
        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 
        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 
        ;;
 
      esac
 
 
 
 
 
      # move library search paths that coincide with paths to not yet
 
      # installed libraries to the beginning of the library search list
 
      new_libs=
 
      for path in $notinst_path; do
 
        case " $new_libs " in
 
        *" -L$path/$objdir "*) ;;
 
        *)
 
          case " $compile_deplibs " in
 
          *" -L$path/$objdir "*)
 
            new_libs="$new_libs -L$path/$objdir" ;;
 
          esac
 
          ;;
 
        esac
 
      done
 
      for deplib in $compile_deplibs; do
 
        case $deplib in
 
        -L*)
 
          case " $new_libs " in
 
          *" $deplib "*) ;;
 
          *) new_libs="$new_libs $deplib" ;;
 
          esac
 
          ;;
 
        *) new_libs="$new_libs $deplib" ;;
 
        esac
 
      done
 
      compile_deplibs="$new_libs"
 
 
 
 
 
      compile_command="$compile_command $compile_deplibs"
 
      finalize_command="$finalize_command $finalize_deplibs"
 
 
 
      if test -n "$rpath$xrpath"; then
 
        # If the user specified any rpath flags, then add them.
 
        for libdir in $rpath $xrpath; do
 
          # This is the magic to use -rpath.
 
          case "$finalize_rpath " in
 
          *" $libdir "*) ;;
 
          *) finalize_rpath="$finalize_rpath $libdir" ;;
 
          esac
 
        done
 
      fi
 
 
 
      # Now hardcode the library paths
 
      rpath=
 
      hardcode_libdirs=
 
      for libdir in $compile_rpath $finalize_rpath; do
 
        if test -n "$hardcode_libdir_flag_spec"; then
 
          if test -n "$hardcode_libdir_separator"; then
 
            if test -z "$hardcode_libdirs"; then
 
              hardcode_libdirs="$libdir"
 
            else
 
              # Just accumulate the unique libdirs.
 
              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 
              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 
                ;;
 
              *)
 
                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
 
                ;;
 
              esac
 
            fi
 
          else
 
            eval flag=\"$hardcode_libdir_flag_spec\"
 
            rpath="$rpath $flag"
 
          fi
 
        elif test -n "$runpath_var"; then
 
          case "$perm_rpath " in
 
          *" $libdir "*) ;;
 
          *) perm_rpath="$perm_rpath $libdir" ;;
 
          esac
 
        fi
 
        case $host in
 
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 
          testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
 
          case :$dllsearchpath: in
 
          *":$libdir:"*) ;;
 
          ::) dllsearchpath=$libdir;;
 
          *) dllsearchpath="$dllsearchpath:$libdir";;
 
          esac
 
          case :$dllsearchpath: in
 
          *":$testbindir:"*) ;;
 
          ::) dllsearchpath=$testbindir;;
 
          *) dllsearchpath="$dllsearchpath:$testbindir";;
 
          esac
 
          ;;
 
        esac
 
      done
 
      # Substitute the hardcoded libdirs into the rpath.
 
      if test -n "$hardcode_libdir_separator" &&
 
         test -n "$hardcode_libdirs"; then
 
        libdir="$hardcode_libdirs"
 
        eval rpath=\" $hardcode_libdir_flag_spec\"
 
      fi
 
      compile_rpath="$rpath"
 
 
 
      rpath=
 
      hardcode_libdirs=
 
      for libdir in $finalize_rpath; do
 
        if test -n "$hardcode_libdir_flag_spec"; then
 
          if test -n "$hardcode_libdir_separator"; then
 
            if test -z "$hardcode_libdirs"; then
 
              hardcode_libdirs="$libdir"
 
            else
 
              # Just accumulate the unique libdirs.
 
              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 
              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 
                ;;
 
              *)
 
                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
 
                ;;
 
              esac
 
            fi
 
          else
 
            eval flag=\"$hardcode_libdir_flag_spec\"
 
            rpath="$rpath $flag"
 
          fi
 
        elif test -n "$runpath_var"; then
 
          case "$finalize_perm_rpath " in
 
          *" $libdir "*) ;;
 
          *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
 
          esac
 
        fi
 
      done
 
      # Substitute the hardcoded libdirs into the rpath.
 
      if test -n "$hardcode_libdir_separator" &&
 
         test -n "$hardcode_libdirs"; then
 
        libdir="$hardcode_libdirs"
 
        eval rpath=\" $hardcode_libdir_flag_spec\"
 
      fi
 
      finalize_rpath="$rpath"
 
 
 
      if test -n "$libobjs" && test "$build_old_libs" = yes; then
 
        # Transform all the library objects into standard objects.
 
        compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 
        finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 
      fi
 
 
 
      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
 
 
 
      # template prelinking step
 
      if test -n "$prelink_cmds"; then
 
        func_execute_cmds "$prelink_cmds" 'exit $?'
 
      fi
 
 
 
      wrappers_required=yes
 
      case $host in
 
      *cygwin* | *mingw* )
 
        if test "$build_libtool_libs" != yes; then
 
          wrappers_required=no
 
        fi
 
        ;;
 
      *cegcc)
 
        # Disable wrappers for cegcc, we are cross compiling anyway.
 
        wrappers_required=no
 
        ;;
 
      *)
 
        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
 
          wrappers_required=no
 
        fi
 
        ;;
 
      esac
 
      if test "$wrappers_required" = no; then
 
        # Replace the output file specification.
 
        compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 
        link_command="$compile_command$compile_rpath"
 
 
 
        # We have no uninstalled library dependencies, so finalize right now.
 
        exit_status=0
 
        func_show_eval "$link_command" 'exit_status=$?'
 
 
 
        # Delete the generated files.
 
        if test -f "$output_objdir/${outputname}S.${objext}"; then
 
          func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
 
        fi
 
 
 
        exit $exit_status
 
      fi
 
 
 
      if test -n "$compile_shlibpath$finalize_shlibpath"; then
 
        compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
 
      fi
 
      if test -n "$finalize_shlibpath"; then
 
        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
 
      fi
 
 
 
      compile_var=
 
      finalize_var=
 
      if test -n "$runpath_var"; then
 
        if test -n "$perm_rpath"; then
 
          # We should set the runpath_var.
 
          rpath=
 
          for dir in $perm_rpath; do
 
            rpath="$rpath$dir:"
 
          done
 
          compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
 
        fi
 
        if test -n "$finalize_perm_rpath"; then
 
          # We should set the runpath_var.
 
          rpath=
 
          for dir in $finalize_perm_rpath; do
 
            rpath="$rpath$dir:"
 
          done
 
          finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
 
        fi
 
      fi
 
 
 
      if test "$no_install" = yes; then
 
        # We don't need to create a wrapper script.
 
        link_command="$compile_var$compile_command$compile_rpath"
 
        # Replace the output file specification.
 
        link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 
        # Delete the old output file.
 
        $opt_dry_run || $RM $output
 
        # Link the executable and exit
 
        func_show_eval "$link_command" 'exit $?'
 
        exit $EXIT_SUCCESS
 
      fi
 
 
 
      if test "$hardcode_action" = relink; then
 
        # Fast installation is not supported
 
        link_command="$compile_var$compile_command$compile_rpath"
 
        relink_command="$finalize_var$finalize_command$finalize_rpath"
 
 
 
        func_warning "this platform does not like uninstalled shared libraries"
 
        func_warning "\`$output' will be relinked during installation"
 
      else
 
        if test "$fast_install" != no; then
 
          link_command="$finalize_var$compile_command$finalize_rpath"
 
          if test "$fast_install" = yes; then
 
            relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
 
          else
 
            # fast_install is set to needless
 
            relink_command=
 
          fi
 
        else
 
          link_command="$compile_var$compile_command$compile_rpath"
 
          relink_command="$finalize_var$finalize_command$finalize_rpath"
 
        fi
 
      fi
 
 
 
      # Replace the output file specification.
 
      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
 
 
      # Delete the old output files.
 
      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
 
 
      func_show_eval "$link_command" 'exit $?'
 
 
 
      # Now create the wrapper script.
 
      func_verbose "creating $output"
 
 
 
      # Quote the relink command for shipping.
 
      if test -n "$relink_command"; then
 
        # Preserve any variables that may affect compiler behavior
 
        for var in $variables_saved_for_relink; do
 
          if eval test -z \"\${$var+set}\"; then
 
            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 
          elif eval var_value=\$$var; test -z "$var_value"; then
 
            relink_command="$var=; export $var; $relink_command"
 
          else
 
            func_quote_for_eval "$var_value"
 
            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 
          fi
 
        done
 
        relink_command="(cd `pwd`; $relink_command)"
 
        relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
 
      fi
 
 
 
      # Quote $ECHO for shipping.
 
      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
 
        case $progpath in
 
        [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
 
        *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
 
        esac
 
        qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
 
      else
 
        qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
 
      fi
 
 
 
      # Only actually do things if not in dry run mode.
 
      $opt_dry_run || {
 
        # win32 will think the script is a binary if it has
 
        # a .exe suffix, so we strip it off here.
 
        case $output in
 
          *.exe) func_stripname '' '.exe' "$output"
 
                 output=$func_stripname_result ;;
 
        esac
 
        # test for cygwin because mv fails w/o .exe extensions
 
        case $host in
 
          *cygwin*)
 
            exeext=.exe
 
            func_stripname '' '.exe' "$outputname"
 
            outputname=$func_stripname_result ;;
 
          *) exeext= ;;
 
        esac
 
        case $host in
 
          *cygwin* | *mingw* )
 
            func_dirname_and_basename "$output" "" "."
 
            output_name=$func_basename_result
 
            output_path=$func_dirname_result
 
            cwrappersource="$output_path/$objdir/lt-$output_name.c"
 
            cwrapper="$output_path/$output_name.exe"
 
            $RM $cwrappersource $cwrapper
 
            trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
 
 
            func_emit_cwrapperexe_src > $cwrappersource
 
 
 
            # The wrapper executable is built using the $host compiler,
 
            # because it contains $host paths and files. If cross-
 
            # compiling, it, like the target executable, must be
 
            # executed on the $host or under an emulation environment.
 
            $opt_dry_run || {
 
              $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
 
              $STRIP $cwrapper
 
            }
 
 
 
            # Now, create the wrapper script for func_source use:
 
            func_ltwrapper_scriptname $cwrapper
 
            $RM $func_ltwrapper_scriptname_result
 
            trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
 
            $opt_dry_run || {
 
              # note: this script will not be executed, so do not chmod.
 
              if test "x$build" = "x$host" ; then
 
                $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
 
              else
 
                func_emit_wrapper no > $func_ltwrapper_scriptname_result
 
              fi
 
            }
 
          ;;
 
          * )
 
            $RM $output
 
            trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
 
 
 
            func_emit_wrapper no > $output
 
            chmod +x $output
 
          ;;
 
        esac
 
      }
 
      exit $EXIT_SUCCESS
 
      ;;
 
    esac
 
 
 
    # See if we need to build an old-fashioned archive.
 
    for oldlib in $oldlibs; do
 
 
 
      if test "$build_libtool_libs" = convenience; then
 
        oldobjs="$libobjs_save $symfileobj"
 
        addlibs="$convenience"
 
        build_libtool_libs=no
 
      else
 
        if test "$build_libtool_libs" = module; then
 
          oldobjs="$libobjs_save"
 
          build_libtool_libs=no
 
        else
 
          oldobjs="$old_deplibs $non_pic_objects"
 
          if test "$preload" = yes && test -f "$symfileobj"; then
 
            oldobjs="$oldobjs $symfileobj"
 
          fi
 
        fi
 
        addlibs="$old_convenience"
 
      fi
 
 
 
      if test -n "$addlibs"; then
 
        gentop="$output_objdir/${outputname}x"
 
        generated="$generated $gentop"
 
 
 
        func_extract_archives $gentop $addlibs
 
        oldobjs="$oldobjs $func_extract_archives_result"
 
      fi
 
 
 
      # Do each command in the archive commands.
 
      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
 
        cmds=$old_archive_from_new_cmds
 
      else
 
 
 
        # Add any objects from preloaded convenience libraries
 
        if test -n "$dlprefiles"; then
 
          gentop="$output_objdir/${outputname}x"
 
          generated="$generated $gentop"
 
 
 
          func_extract_archives $gentop $dlprefiles
 
          oldobjs="$oldobjs $func_extract_archives_result"
 
        fi
 
 
 
        # POSIX demands no paths to be encoded in archives.  We have
 
        # to avoid creating archives with duplicate basenames if we
 
        # might have to extract them afterwards, e.g., when creating a
 
        # static archive out of a convenience library, or when linking
 
        # the entirety of a libtool archive into another (currently
 
        # not supported by libtool).
 
        if (for obj in $oldobjs
 
            do
 
              func_basename "$obj"
 
              $ECHO "$func_basename_result"
 
            done | sort | sort -uc >/dev/null 2>&1); then
 
          :
 
        else
 
          $ECHO "copying selected object files to avoid basename conflicts..."
 
          gentop="$output_objdir/${outputname}x"
 
          generated="$generated $gentop"
 
          func_mkdir_p "$gentop"
 
          save_oldobjs=$oldobjs
 
          oldobjs=
 
          counter=1
 
          for obj in $save_oldobjs
 
          do
 
            func_basename "$obj"
 
            objbase="$func_basename_result"
 
            case " $oldobjs " in
 
            " ") oldobjs=$obj ;;
 
            *[\ /]"$objbase "*)
 
              while :; do
 
                # Make sure we don't pick an alternate name that also
 
                # overlaps.
 
                newobj=lt$counter-$objbase
 
                func_arith $counter + 1
 
                counter=$func_arith_result
 
                case " $oldobjs " in
 
                *[\ /]"$newobj "*) ;;
 
                *) if test ! -f "$gentop/$newobj"; then break; fi ;;
 
                esac
 
              done
 
              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
 
              oldobjs="$oldobjs $gentop/$newobj"
 
              ;;
 
            *) oldobjs="$oldobjs $obj" ;;
 
            esac
 
          done
 
        fi
 
        eval cmds=\"$old_archive_cmds\"
 
 
 
        func_len " $cmds"
 
        len=$func_len_result
 
        if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 
          cmds=$old_archive_cmds
 
        else
 
          # the command line is too long to link in one step, link in parts
 
          func_verbose "using piecewise archive linking..."
 
          save_RANLIB=$RANLIB
 
          RANLIB=:
 
          objlist=
 
          concat_cmds=
 
          save_oldobjs=$oldobjs
 
          oldobjs=
 
          # Is there a better way of finding the last object in the list?
 
          for obj in $save_oldobjs
 
          do
 
            last_oldobj=$obj
 
          done
 
          eval test_cmds=\"$old_archive_cmds\"
 
          func_len " $test_cmds"
 
          len0=$func_len_result
 
          len=$len0
 
          for obj in $save_oldobjs
 
          do
 
            func_len " $obj"
 
            func_arith $len + $func_len_result
 
            len=$func_arith_result
 
            func_append objlist " $obj"
 
            if test "$len" -lt "$max_cmd_len"; then
 
              :
 
            else
 
              # the above command should be used before it gets too long
 
              oldobjs=$objlist
 
              if test "$obj" = "$last_oldobj" ; then
 
                RANLIB=$save_RANLIB
 
              fi
 
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 
              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 
              objlist=
 
              len=$len0
 
            fi
 
          done
 
          RANLIB=$save_RANLIB
 
          oldobjs=$objlist
 
          if test "X$oldobjs" = "X" ; then
 
            eval cmds=\"\$concat_cmds\"
 
          else
 
            eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
 
          fi
 
        fi
 
      fi
 
      func_execute_cmds "$cmds" 'exit $?'
 
    done
 
 
 
    test -n "$generated" && \
 
      func_show_eval "${RM}r$generated"
 
 
 
    # Now create the libtool archive.
 
    case $output in
 
    *.la)
 
      old_library=
 
      test "$build_old_libs" = yes && old_library="$libname.$libext"
 
      func_verbose "creating $output"
 
 
 
      # Preserve any variables that may affect compiler behavior
 
      for var in $variables_saved_for_relink; do
 
        if eval test -z \"\${$var+set}\"; then
 
          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 
        elif eval var_value=\$$var; test -z "$var_value"; then
 
          relink_command="$var=; export $var; $relink_command"
 
        else
 
          func_quote_for_eval "$var_value"
 
          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 
        fi
 
      done
 
      # Quote the link command for shipping.
 
      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
 
      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
 
      if test "$hardcode_automatic" = yes ; then
 
        relink_command=
 
      fi
 
 
 
      # Only create the output if not a dry run.
 
      $opt_dry_run || {
 
        for installed in no yes; do
 
          if test "$installed" = yes; then
 
            if test -z "$install_libdir"; then
 
              break
 
            fi
 
            output="$output_objdir/$outputname"i
 
            # Replace all uninstalled libtool libraries with the installed ones
 
            newdependency_libs=
 
            for deplib in $dependency_libs; do
 
              case $deplib in
 
              *.la)
 
                func_basename "$deplib"
 
                name="$func_basename_result"
 
                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 
                test -z "$libdir" && \
 
                  func_fatal_error "\`$deplib' is not a valid libtool archive"
 
                newdependency_libs="$newdependency_libs $libdir/$name"
 
                ;;
 
              *) newdependency_libs="$newdependency_libs $deplib" ;;
 
              esac
 
            done
 
            dependency_libs="$newdependency_libs"
 
            newdlfiles=
 
 
 
            for lib in $dlfiles; do
 
              case $lib in
 
              *.la)
 
                func_basename "$lib"
 
                name="$func_basename_result"
 
                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 
                test -z "$libdir" && \
 
                  func_fatal_error "\`$lib' is not a valid libtool archive"
 
                newdlfiles="$newdlfiles $libdir/$name"
 
                ;;
 
              *) newdlfiles="$newdlfiles $lib" ;;
 
              esac
 
            done
 
            dlfiles="$newdlfiles"
 
            newdlprefiles=
 
            for lib in $dlprefiles; do
 
              case $lib in
 
              *.la)
 
                # Only pass preopened files to the pseudo-archive (for
 
                # eventual linking with the app. that links it) if we
 
                # didn't already link the preopened objects directly into
 
                # the library:
 
                func_basename "$lib"
 
                name="$func_basename_result"
 
                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 
                test -z "$libdir" && \
 
                  func_fatal_error "\`$lib' is not a valid libtool archive"
 
                newdlprefiles="$newdlprefiles $libdir/$name"
 
                ;;
 
              esac
 
            done
 
            dlprefiles="$newdlprefiles"
 
          else
 
            newdlfiles=
 
            for lib in $dlfiles; do
 
              case $lib in
 
                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 
                *) abs=`pwd`"/$lib" ;;
 
              esac
 
              newdlfiles="$newdlfiles $abs"
 
            done
 
            dlfiles="$newdlfiles"
 
            newdlprefiles=
 
            for lib in $dlprefiles; do
 
              case $lib in
 
                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 
                *) abs=`pwd`"/$lib" ;;
 
              esac
 
              newdlprefiles="$newdlprefiles $abs"
 
            done
 
            dlprefiles="$newdlprefiles"
 
          fi
 
          $RM $output
 
          # place dlname in correct position for cygwin
 
          tdlname=$dlname
 
          case $host,$output,$installed,$module,$dlname in
 
            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 
          esac
 
          $ECHO > $output "\
 
# $outputname - a libtool library file
 
# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
#
 
# Please DO NOT delete this file!
 
# It is necessary for linking the library.
 
 
 
# The name that we can dlopen(3).
 
dlname='$tdlname'
 
 
 
# Names of this library.
 
library_names='$library_names'
 
 
 
# The name of the static archive.
 
old_library='$old_library'
 
 
 
# Linker flags that can not go in dependency_libs.
 
inherited_linker_flags='$new_inherited_linker_flags'
 
 
 
# Libraries that this one depends upon.
 
dependency_libs='$dependency_libs'
 
 
 
# Names of additional weak libraries provided by this library
 
weak_library_names='$weak_libs'
 
 
 
# Version information for $libname.
 
current=$current
 
age=$age
 
revision=$revision
 
 
 
# Is this an already installed library?
 
installed=$installed
 
 
 
# Should we warn about portability when linking against -modules?
 
shouldnotlink=$module
 
 
 
# Files to dlopen/dlpreopen
 
dlopen='$dlfiles'
 
dlpreopen='$dlprefiles'
 
 
 
# Directory that this library needs to be installed in:
 
libdir='$install_libdir'"
 
          if test "$installed" = no && test "$need_relink" = yes; then
 
            $ECHO >> $output "\
 
relink_command=\"$relink_command\""
 
          fi
 
        done
 
      }
 
 
 
      # Do a symbolic link so that the libtool archive can be found in
 
      # LD_LIBRARY_PATH before the program is installed.
 
      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
 
      ;;
 
    esac
 
    exit $EXIT_SUCCESS
 
}
 
 
 
{ test "$mode" = link || test "$mode" = relink; } &&
 
    func_mode_link ${1+"$@"}
 
 
 
 
 
# func_mode_uninstall arg...
 
func_mode_uninstall ()
 
{
 
    $opt_debug
 
    RM="$nonopt"
 
    files=
 
    rmforce=
 
    exit_status=0
 
 
 
    # This variable tells wrapper scripts just to set variables rather
 
    # than running their programs.
 
    libtool_install_magic="$magic"
 
 
 
    for arg
 
    do
 
      case $arg in
 
      -f) RM="$RM $arg"; rmforce=yes ;;
 
      -*) RM="$RM $arg" ;;
 
      *) files="$files $arg" ;;
 
      esac
 
    done
 
 
 
    test -z "$RM" && \
 
      func_fatal_help "you must specify an RM program"
 
 
 
    rmdirs=
 
 
 
    origobjdir="$objdir"
 
    for file in $files; do
 
      func_dirname "$file" "" "."
 
      dir="$func_dirname_result"
 
      if test "X$dir" = X.; then
 
        objdir="$origobjdir"
 
      else
 
        objdir="$dir/$origobjdir"
 
      fi
 
      func_basename "$file"
 
      name="$func_basename_result"
 
      test "$mode" = uninstall && objdir="$dir"
 
 
 
      # Remember objdir for removal later, being careful to avoid duplicates
 
      if test "$mode" = clean; then
 
        case " $rmdirs " in
 
          *" $objdir "*) ;;
 
          *) rmdirs="$rmdirs $objdir" ;;
 
        esac
 
      fi
 
 
 
      # Don't error if the file doesn't exist and rm -f was used.
 
      if { test -L "$file"; } >/dev/null 2>&1 ||
 
         { test -h "$file"; } >/dev/null 2>&1 ||
 
         test -f "$file"; then
 
        :
 
      elif test -d "$file"; then
 
        exit_status=1
 
        continue
 
      elif test "$rmforce" = yes; then
 
        continue
 
      fi
 
 
 
      rmfiles="$file"
 
 
 
      case $name in
 
      *.la)
 
        # Possibly a libtool archive, so verify it.
 
        if func_lalib_p "$file"; then
 
          func_source $dir/$name
 
 
 
          # Delete the libtool libraries and symlinks.
 
          for n in $library_names; do
 
            rmfiles="$rmfiles $objdir/$n"
 
          done
 
          test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
 
 
 
          case "$mode" in
 
          clean)
 
            case "  $library_names " in
 
            # "  " in the beginning catches empty $dlname
 
            *" $dlname "*) ;;
 
            *) rmfiles="$rmfiles $objdir/$dlname" ;;
 
            esac
 
            test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 
            ;;
 
          uninstall)
 
            if test -n "$library_names"; then
 
              # Do each command in the postuninstall commands.
 
              func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 
            fi
 
 
 
            if test -n "$old_library"; then
 
              # Do each command in the old_postuninstall commands.
 
              func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 
            fi
 
            # FIXME: should reinstall the best remaining shared library.
 
            ;;
 
          esac
 
        fi
 
        ;;
 
 
 
      *.lo)
 
        # Possibly a libtool object, so verify it.
 
        if func_lalib_p "$file"; then
 
 
 
          # Read the .lo file
 
          func_source $dir/$name
 
 
 
          # Add PIC object to the list of files to remove.
 
          if test -n "$pic_object" &&
 
             test "$pic_object" != none; then
 
            rmfiles="$rmfiles $dir/$pic_object"
 
          fi
 
 
 
          # Add non-PIC object to the list of files to remove.
 
          if test -n "$non_pic_object" &&
 
             test "$non_pic_object" != none; then
 
            rmfiles="$rmfiles $dir/$non_pic_object"
 
          fi
 
        fi
 
        ;;
 
 
 
      *)
 
        if test "$mode" = clean ; then
 
          noexename=$name
 
          case $file in
 
          *.exe)
 
            func_stripname '' '.exe' "$file"
 
            file=$func_stripname_result
 
            func_stripname '' '.exe' "$name"
 
            noexename=$func_stripname_result
 
            # $file with .exe has already been added to rmfiles,
 
            # add $file without .exe
 
            rmfiles="$rmfiles $file"
 
            ;;
 
          esac
 
          # Do a test to see if this is a libtool program.
 
          if func_ltwrapper_p "$file"; then
 
            if func_ltwrapper_executable_p "$file"; then
 
              func_ltwrapper_scriptname "$file"
 
              relink_command=
 
              func_source $func_ltwrapper_scriptname_result
 
              rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
 
            else
 
              relink_command=
 
              func_source $dir/$noexename
 
            fi
 
 
 
            # note $name still contains .exe if it was in $file originally
 
            # as does the version of $file that was added into $rmfiles
 
            rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
 
            if test "$fast_install" = yes && test -n "$relink_command"; then
 
              rmfiles="$rmfiles $objdir/lt-$name"
 
            fi
 
            if test "X$noexename" != "X$name" ; then
 
              rmfiles="$rmfiles $objdir/lt-${noexename}.c"
 
            fi
 
          fi
 
        fi
 
        ;;
 
      esac
 
      func_show_eval "$RM $rmfiles" 'exit_status=1'
 
    done
 
    objdir="$origobjdir"
 
 
 
    # Try to remove the ${objdir}s in the directories where we deleted files
 
    for dir in $rmdirs; do
 
      if test -d "$dir"; then
 
        func_show_eval "rmdir $dir >/dev/null 2>&1"
 
      fi
 
    done
 
 
 
    exit $exit_status
 
}
 
 
 
{ test "$mode" = uninstall || test "$mode" = clean; } &&
 
    func_mode_uninstall ${1+"$@"}
 
 
 
test -z "$mode" && {
 
  help="$generic_help"
 
  func_fatal_help "you must specify a MODE"
 
}
 
 
 
test -z "$exec_cmd" && \
 
  func_fatal_help "invalid operation mode \`$mode'"
 
 
 
if test -n "$exec_cmd"; then
 
  eval exec "$exec_cmd"
 
  exit $EXIT_FAILURE
 
fi
 
 
 
exit $exit_status
 
 
 
 
 
# The TAGs below are defined such that we never get into a situation
 
# in which we disable both kinds of libraries.  Given conflicting
 
# choices, we go for a static library, that is the most portable,
 
# since we can't tell whether shared libraries were disabled because
 
# the user asked for that or because the platform doesn't support
 
# them.  This is particularly important on AIX, because we don't
 
# support having both static and shared libraries enabled at the same
 
# time on that platform, so we default to a shared-only configuration.
 
# If a disable-shared tag is given, we'll fallback to a static-only
 
# configuration.  But we'll never go from static-only to shared-only.
 
 
 
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
 
build_libtool_libs=no
 
build_old_libs=yes
 
# ### END LIBTOOL TAG CONFIG: disable-shared
 
 
 
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
 
build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
 
# ### END LIBTOOL TAG CONFIG: disable-static
 
 
 
# Local Variables:
 
# mode:shell-script
 
# sh-indentation:2
 
# End:
 
# vi:sw=2
 
 
 No newline at end of file
 No newline at end of file

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.