URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [AT26DFxxx.v] - Diff between revs 6 and 403

Rev 6	Rev 403
Line 87...	Line 87...
`endif	`endif

`parameter DEVICE = "AT25DF041A"; // Device selected`	`parameter DEVICE = "AT25DF041A"; // Device selected`
`parameter PRELOAD = 1; // preload memory with content in MEMORY_FILE`	`parameter PRELOAD = 1; // preload memory with content in MEMORY_FILE`
`parameter MEMORY_FILE = "flash.in"; // Memory pre-load`	`parameter MEMORY_FILE = "flash.in"; // Memory pre-load`
	`parameter VERBOSE = 1;`

`// ********************************************************************* //`	`// ********************************************************************* //`
`//Timing Parameters :`	`//Timing Parameters :`
`// ******************************************************************** //`	`// ******************************************************************** //`

Line 583...	Line 584...
`end`	`end`
`#tV SO_reg = temp_data[i];`	`#tV SO_reg = temp_data[i];`
`SO_on = 1'b1;`	`SO_on = 1'b1;`
`if (i == 0)`	`if (i == 0)`
`begin`	`begin`
`//$display ("Data: %h read from memory location %h",temp_data,read_addr);`	`if (VERBOSE)`
	`$display ("Data: %h read from memory location %h",temp_data,read_addr);`
`read_addr = read_addr + 1; // next byte`	`read_addr = read_addr + 1; // next byte`
`i = 7;`	`i = 7;`
`if (read_addr >= (MEMSIZE-1))`	`if (read_addr >= (MEMSIZE-1))`
`read_addr = 0; // Note that rollover occurs at end of memory,`	`read_addr = 0; // Note that rollover occurs at end of memory,`
`temp_data = memory [read_addr];`	`temp_data = memory [read_addr];`