Subversion Repositories openrisc

# Hardset the board name, even though we could probably determine it

FPGA_VENDOR=xilinx

BOARD_NAME=ml501

BOARD_DIR=$(PROJECT_ROOT)/boards/$(FPGA_VENDOR)/$(BOARD_NAME)

# Export BOARD for the software makefiles

BOARD=$(FPGA_VENDOR)/$(BOARD_NAME)

export BOARD

# Paths to other important parts of this test suite

COMMON_RTL_DIR = $(PROJECT_ROOT)/rtl

COMMON_RTL_VERILOG_DIR = $(COMMON_RTL_DIR)/verilog

#COMMON_RTL_VHDL_DIR = $(COMMON_RTL_DIR)/vhdl

BOARD_RTL_DIR=$(BOARD_DIR)/rtl

BOARD_RTL_VERILOG_DIR=$(BOARD_RTL_DIR)/verilog

# Only 1 include path for board builds - their own!

BOARD_RTL_VERILOG_INCLUDE_DIR=$(BOARD_RTL_VERILOG_DIR)/include

BOARD_BENCH_DIR=$(BOARD_DIR)/bench

BOARD_BENCH_VERILOG_DIR=$(BOARD_BENCH_DIR)/verilog

BOARD_BENCH_VERILOG_INCLUDE_DIR=$(BOARD_BENCH_VERILOG_DIR)/include

COMMON_BENCH_DIR=$(PROJECT_ROOT)

COMMON_BENCH_VERILOG_DIR=$(COMMON_BENCH_DIR)/verilog

COMMON_BENCH_VERILOG_INCLUDE_DIR=$(COMMON_BENCH_VERILOG_DIR)/include

# Top level files for DUT and testbench

DUT_TOP=$(BOARD_RTL_VERILOG_DIR)/$(DESIGN_NAME)_top/$(DESIGN_NAME)_top.v

BENCH_TOP=$(BOARD_BENCH_VERILOG_DIR)/$(DESIGN_NAME)_testbench.v

# Software tests we'll run

# Need this for individual test variables to not break

# Main defines file is from board include path

PROJECT_VERILOG_DEFINES=$(BOARD_RTL_VERILOG_INCLUDE_DIR)/$(DESIGN_NAME)-defines.v

# Detect technology to use for the simulation

DESIGN_DEFINES=$(shell cat $(PROJECT_VERILOG_DEFINES) | sed s://.*::g | sed s:\`:\#:g | sed 's:^[ ]*::' | awk '{print};/^\#define/{printf "_%s=%s\n",$$2,$$2}' | grep -v PERIOD | cpp -P | sed s:^_::g | sed s:=$$::g )

# Rule to look at what defines are being extracted from main file

print-defines:

        @echo echo; echo "\t### Design defines ###"; echo;

        @echo "\tParsing "$(PROJECT_VERILOG_DEFINES)" and exporting:"

        @echo $(DESIGN_DEFINES)

print-tests:

        @echo; echo; echo "\t### Software tests to be run ###"; echo;

        @echo $(TESTS)

        @echo

# Backend tool path

# Check that the XILINX_PATH variable is set

ifeq ($(XILINX_PATH),)

$(error XILINX_PATH environment variable not set. Set it and rerun)

endif

XILINX_SETTINGS_SCRIPT=$(XILINX_PATH)/settings32.sh

XILINX_SETTINGS_SCRIPT_EXISTS=$(shell if [ -e $(XILINX_SETTINGS_SCRIPT) ]; then echo 1; else echo 0; fi)

ifeq ($(XILINX_SETTINGS_SCRIPT_EXISTS),0)

$(error XILINX_PATH variable not set correctly. Cannot find $$XILINX_PATH/settings32.sh)

endif

# Simulation directories

SIM_DIR ?=$(BOARD_DIR)/sim

RTL_SIM_DIR=$(SIM_DIR)

RTL_SIM_RUN_DIR=$(RTL_SIM_DIR)/run

RTL_SIM_BIN_DIR=$(RTL_SIM_DIR)/bin

RTL_SIM_RESULTS_DIR=$(RTL_SIM_DIR)/out

# Testbench paths

BOARD_BENCH_DIR=$(BOARD_DIR)/bench

BOARD_BENCH_VERILOG_DIR=$(BOARD_BENCH_DIR)/verilog

COMMON_BENCH_DIR=$(PROJECT_ROOT)/bench

COMMON_BENCH_VERILOG_DIR=$(COMMON_BENCH_DIR)/verilog

#BENCH_VHDL_DIR=$(BENCH_DIR)/vhdl

# No SystemC or Verilator support for this build

#BENCH_SYSC_DIR=$(BENCH_DIR)/sysc

#BENCH_SYSC_SRC_DIR=$(BENCH_SYSC_DIR)/src

#BENCH_SYSC_INCLUDE_DIR=$(BENCH_SYSC_DIR)/include

# Backend directories

# This one is the board build's backend dir.

BOARD_BACKEND_DIR=$(BOARD_DIR)/backend

BOARD_BACKEND_VERILOG_DIR=$(BOARD_BACKEND_DIR)/rtl/verilog

TECHNOLOGY_BACKEND_DIR=$(BOARD_DIR)/../backend

# This path is for the technology library

#TECHNOLOGY_BACKEND_VERILOG_DIR=$(TECHNOLOGY_BACKEND_DIR)/rtl/verilog

# Depends on the XILINX_PATH variable - we check above if it's set properly.

TECHNOLOGY_BACKEND_VERILOG_DIR=$(XILINX_PATH)/verilog

# Synthesis directory for board

BOARD_SYN_DIR=$(BOARD_DIR)/syn/synplify

BOARD_SYN_OUT_DIR=$(BOARD_SYN_DIR)/out

# System software dir

COMMON_SW_DIR=$(PROJECT_ROOT)/sw

BOARD_SW_DIR=$(BOARD_DIR)/sw

# BootROM code, which generates a verilog array select values

BOOTROM_FILE=bootrom.v

BOARD_BOOTROM_SW_DIR=$(BOARD_SW_DIR)/bootrom

BOOTROM_SRC=$(shell ls $(BOARD_BOOTROM_SW_DIR)/* | grep -v $(BOOTROM_FILE))

BOOTROM_VERILOG=$(BOARD_BOOTROM_SW_DIR)/$(BOOTROM_FILE)

.phony: $(BOOTROM_VERILOG)

bootrom: $(BOOTROM_VERILOG)

$(BOOTROM_VERILOG): $(BOOTROM_SRC)

        $(Q)echo; echo "\t### Generating bootup ROM ###"; echo

        $(Q)$(MAKE) -C $(BOARD_BOOTROM_SW_DIR) $(BOOTROM_FILE)

# Suffix of file to check after each test for the string

TEST_OUT_FILE_SUFFIX=-general.log

TEST_OK_STRING=8000000d

# Dynamically generated verilog file defining configuration for various things

# Rule actually generating this is found in definesgen.inc file.

TEST_DEFINES_VLG=test-defines.v

.PHONY: $(TEST_DEFINES_VLG)

# Set V=1 when calling make to enable verbose output

# mainly for debugging purposes.

ifeq ($(V), 1)

Q=

QUIET=

else

Q ?=@

QUIET=-quiet

endif

# Modelsim variables

MGC_VSIM=vsim

MGC_VLOG_COMP=vlog

MGC_VHDL_COMP=vcom

MODELSIM=modelsim

# Default simulator is Modelsim here as we're using the ProASIC3

# libraries which are not compilable with Icarus.

# Set SIMULATOR=modelsim to use Modelsim (Default)

# Set SIMULATOR=ncverilog to use Cadence's NC-Verilog - TODO

# Set SIMULATOR=icarus to use Icarus Verilog (Not supported for this board)

#

VOPT_ARGS=$(QUIET) -suppress 2241

# If VCD dump is desired, tell Modelsim not to optimise

# away everything.

ifeq ($(VCD), 1)

#VOPT_ARGS=-voptargs="+acc=rnp"

VOPT_ARGS=+acc=rnpqv

endif

# VSIM commands

# Suppressed warnings - 3009: Failed to open $readmemh() file

# Suppressed warnings - 3009: Module 'blah' does not have a `timescale directive in effect, but previous modules do.

# Suppressed warnings - 8598: Non-positive replication multiplier inside concat. Replication will be ignored

VSIM_ARGS=  -suppress 7 -suppress 3009 -suppress 8598 -c $(QUIET) -do "set StdArithNoWarnings 1; run -all; exit"

# VPI debugging interface variables

VPI_SRC_C_DIR=$(COMMON_BENCH_VERILOG_DIR)/vpi/c

VPI_SRC_VERILOG_DIR=vpi/verilog

VPI_SRCS=$(shell ls $(VPI_SRC_C_DIR)/*.[ch])

# Modelsim VPI compile variables

MODELTECH_VPILIB=msim_jp_vpi.sl

# Modelsim VPI settings

ifeq ($(VPI), 1)

VPI_LIBS=$(VPI_SRC_C_DIR)/$(MODELTECH_VPILIB)

VSIM_ARGS += -pli $(VPI_SRC_C_DIR)/$(MODELTECH_VPILIB)

endif

# Rule to make the VPI library for modelsim

$(VPI_SRC_C_DIR)/$(MODELTECH_VPILIB): $(VPI_SRCS)

        $(MAKE) -C $(VPI_SRC_C_DIR) $(MODELTECH_VPILIB)

#

# Verilog DUT source variables

#

# First consider any modules we'll use gatelevel descriptions of.

# These will have to be set on the command line

GATELEVEL_MODULES ?=

# First we get a list of modules in the RTL path of the board's path.

# Next we check which modules not in the board's RTL path are in the root RTL

# path (modules which can be commonly instantiated, but over which board

# build-specific versions take precedence.)

# Paths under board/***/rtl/verilog we wish to exclude when getting modules

BOARD_VERILOG_MODULES_EXCLUDE= include $(GATELEVEL_MODULES)

BOARD_VERILOG_MODULES_DIR_LIST=$(shell ls $(BOARD_RTL_VERILOG_DIR))

# Apply exclude to list of modules

BOARD_RTL_VERILOG_MODULES=$(filter-out $(BOARD_VERILOG_MODULES_EXCLUDE),$(BOARD_VERILOG_MODULES_DIR_LIST))

# Rule for debugging this script

print-board-modules:

        @echo echo; echo "\t### Board verilog modules ###"; echo

        @echo $(BOARD_RTL_VERILOG_MODULES)

# Now get list of modules that we don't have a version of in the board path

COMMON_VERILOG_MODULES_EXCLUDE= include

COMMON_VERILOG_MODULES_EXCLUDE += $(BOARD_RTL_VERILOG_MODULES)

COMMON_VERILOG_MODULES_EXCLUDE += $(GATELEVEL_MODULES)

COMMON_RTL_VERILOG_MODULES_DIR_LIST=$(shell ls $(COMMON_RTL_VERILOG_DIR))

COMMON_RTL_VERILOG_MODULES=$(filter-out $(COMMON_VERILOG_MODULES_EXCLUDE), $(COMMON_RTL_VERILOG_MODULES_DIR_LIST))

# Add these to exclude their RTL directories from being included in scripts

# Rule for debugging this script

print-common-modules-exclude:

        @echo echo; echo "\t### Common verilog modules being excluded due to board versions ###"; echo

        @echo "$(COMMON_VERILOG_MODULES_EXCLUDE)"

print-common-modules:

        @echo echo; echo "\t###  Verilog modules from common RTL dir ###"; echo

        @echo $(COMMON_RTL_VERILOG_MODULES)

# List of verilog source files (only .v files!)

# Board RTL modules first

RTL_VERILOG_SRC=$(shell for module in $(BOARD_RTL_VERILOG_MODULES); do if [ -d $(BOARD_RTL_VERILOG_DIR)/$$module ]; then ls $(BOARD_RTL_VERILOG_DIR)/$$module/*.v; fi; done)

# Common RTL module source

RTL_VERILOG_SRC +=$(shell for module in $(COMMON_RTL_VERILOG_MODULES); do if [ -d $(COMMON_RTL_VERILOG_DIR)/$$module ]; then ls $(COMMON_RTL_VERILOG_DIR)/$$module/*.v; fi; done)

# List of verilog includes from board RTL path - only for rule sensitivity

RTL_VERILOG_INCLUDES=$(shell ls $(BOARD_RTL_VERILOG_INCLUDE_DIR)/*.*)

print-verilog-src:

        @echo echo; echo "\t### Verilog source ###"; echo

        @echo $(RTL_VERILOG_SRC)

# Rules to make RTL we might need

# Expects modules, if they need making, to have their top verilog file to

# correspond to their module name, and the directory should have a make file

# and rule which works for this command.

# Add name of module to this list, currently only does verilog ones.

# Rule 'rtl' is called just before generating DUT modelsim compilation script

RTL_TO_CHECK=

rtl:

        $(Q)for module in $(RTL_TO_CHECK); do \

                $(MAKE) -C $(RTL_VERILOG_DIR)/$$module $$module.v; \

        done

#RTL_VHDL_MODULES=$(shell ls $(RTL_VHDL_DIR))

# VHDL sources

#RTL_VHDL_SRC=$(shell for module in $(RTL_VHDL_MODULES); do if [ -d $(RTL_VHDL_DIR)/$$module ]; then ls $(RTL_VHDL_DIR)/$$module/*.vhd; fi; done)

#print-vhdl-src:

#       @echo echo; echo "\t### VHDL modules and source ###"; echo

#       @echo "modules: "; echo $(RTL_VHDL_MODULES); echo

#       @echo "source: "$(RTL_VHDL_SRC)

BOARD_BENCH_VERILOG_SRC_FILES=$(notdir $(BOARD_BENCH_VERILOG_SRC))

# Now only take the source from the common path that we don't already have in

# our board's

COMMON_BENCH_VERILOG_DIR_LS=$(shell ls $(COMMON_BENCH_VERILOG_DIR)/*.v)

COMMON_BENCH_VERILOG_SRC_FILES=$(notdir $(COMMON_BENCH_VERILOG_DIR_LS))

COMMON_BENCH_VERILOG_SRC_FILTERED=$(filter-out $(BOARD_BENCH_VERILOG_SRC_FILES) $(DESIGN_NAME)_testbench.v,$(COMMON_BENCH_VERILOG_SRC_FILES))

COMMON_BENCH_VERILOG_SRC=$(addprefix $(COMMON_BENCH_VERILOG_DIR)/, $(COMMON_BENCH_VERILOG_SRC_FILTERED))

print-board-bench-src:

        $(Q)echo "\tBoard bench verilog source"; \

        echo $(BOARD_BENCH_VERILOG_SRC)

print-common-bench-src:

        $(Q)echo "\Common bench verilog source"; \

        echo $(COMMON_BENCH_VERILOG_SRC)

# Testbench source subdirectory detection (exclude include, we always use

# board bench include directory!)

BOARD_BENCH_VERILOG_SUBDIRS=$(shell cd $(BOARD_BENCH_VERILOG_DIR) && ls -d */ | grep -v include)

COMMON_BENCH_VERILOG_SUBDIRS=$(shell cd $(COMMON_BENCH_VERILOG_DIR) && ls -d */ | grep -v include)

# Get rid of ones we have a copy of locally

COMMON_BENCH_VERILOG_SUBDIRS_EXCLUDE_BOARDS=$(filter-out $(BOARD_BENCH_VERILOG_SUBDIRS),$(COMMON_BENCH_VERILOG_SUBDIRS))

# Construct list of paths we will want to include

BENCH_VERILOG_SUBDIRS=$(addprefix $(COMMON_BENCH_VERILOG_DIR)/,$(COMMON_BENCH_VERILOG_SUBDIRS_EXCLUDE_BOARDS))

BENCH_VERILOG_SUBDIRS += $(addprefix $(BOARD_BENCH_VERILOG_DIR)/,$(BOARD_BENCH_VERILOG_SUBDIRS))

# Finally, add include path from local bench path

BENCH_VERILOG_SUBDIRS += $(BOARD_BENCH_VERILOG_DIR)/include

ifeq ($(VPI), 1)

# Manually add the VPI bench verilog path

COMMON_BENCH_VERILOG_SUBDIRS += $(VPI_SRC_VERILOG_DIR)

endif

print-board-bench-subdirs:

        $(Q)echo "\tBoard bench subdirectories"; \

        echo $(BOARD_BENCH_VERILOG_SUBDIRS)

print-common-bench-subdirs:

        $(Q)echo "\tCommon bench subdirectories"; \

        echo $(COMMON_BENCH_VERILOG_SUBDIRS)

print-bench-subdirs:

        $(Q)echo "\tBench subdirectories"; \

        echo $(BENCH_VERILOG_SUBDIRS)

# Backend technology library files

# We don't do this for the board backend stuff - that should all be properly

# named, and so we only need to pass the "-y" option for that path.

BOARD_BACKEND_VERILOG_SRC=$(shell ls $(BOARD_BACKEND_VERILOG_DIR)/*.v )

#

# Compile script generation rules:

#

# Modelsim library compilation rules

#       $(Q)echo "-y " $(BOARD_BACKEND_VERILOG_DIR) >> $@;

# DUT compile script

modelsim_dut.scr: rtl $(RTL_VERILOG_SRC) $(RTL_VERILOG_INCLUDES) $(BOOTROM_VERILOG)

        $(Q)echo "+incdir+"$(BOARD_RTL_VERILOG_INCLUDE_DIR) > $@;

        $(Q)echo "+incdir+"$(BOARD_BOOTROM_SW_DIR) >> $@;

        $(Q)echo "+incdir+"$(BOARD_BENCH_VERILOG_INCLUDE_DIR) >> $@;

        $(Q)echo "+libext+.v" >> $@;

        $(Q)for module in $(BOARD_RTL_VERILOG_MODULES); do if [ -d $(BOARD_RTL_VERILOG_DIR)/$$module ]; then echo "-y " $(BOARD_RTL_VERILOG_DIR)/$$module >> $@; fi; done

        $(Q)for module in $(COMMON_RTL_VERILOG_MODULES); do if [ -d $(COMMON_RTL_VERILOG_DIR)/$$module ]; then echo "-y " $(COMMON_RTL_VERILOG_DIR)/$$module >> $@; fi; done

        $(Q)echo "-y "$(TECHNOLOGY_BACKEND_VERILOG_DIR)"/src/unisims" >> $@;

        $(Q)echo "-y "$(TECHNOLOGY_BACKEND_VERILOG_DIR)"/src/XilinxCoreLib" >> $@;

        $(Q)if [ ! -z "$$GATELEVEL_MODULES" ]; \

                then echo "-y " $(BOARD_SYN_OUT_DIR) >> $@; \

                echo "+libext+.vm" >> $@; \

        fi

        $(Q)echo >> $@

modelsim_bench.scr: $(BOARD_BENCH_VERILOG_SRC) $(COMMON_BENCH_VERILOG_SRC)

        $(Q)echo "+incdir+"$(BOARD_BENCH_VERILOG_INCLUDE_DIR) > $@;

        $(Q)echo "+incdir+"$(COMMON_BENCH_VERILOG_INCLUDE_DIR) >> $@;

        $(Q)for path in $(BENCH_VERILOG_SUBDIRS); do echo "+incdir+"$$path >> $@; done

        $(Q)for path in $(BENCH_VERILOG_SUBDIRS); do echo "-y "$$path >> $@; done

        $(Q)echo "+incdir+"$(BOARD_RTL_VERILOG_INCLUDE_DIR) >> $@;

        $(Q)echo "+libext+.v" >> $@;

        $(Q)echo "+incdir+"$(TECHNOLOGY_BACKEND_VERILOG_DIR)"/src" >> $@;

        $(Q)for vsrc in $(BOARD_BENCH_VERILOG_SRC); do echo $$vsrc >> $@; done

        $(Q)for vsrc in $(COMMON_BENCH_VERILOG_SRC); do echo $$vsrc >> $@; done

        $(Q)echo >> $@

# Modelsim library compilation rules

# Compile DUT into "work" library

work: modelsim_dut.scr

        $(Q)if [ ! -e $@ ]; then vlib $@; fi

        $(Q)echo; echo "\t### Compiling Verilog design library ###"; echo

        $(Q)vlog $(QUIET) -f $< $(DUT_TOP)

#       $(Q)echo; echo "\t### Compiling VHDL design library ###"; echo

#       $(Q)vcom -93 $(QUIET) $(RTL_VHDL_SRC)

# Single compile rule

.PHONY : $(MODELSIM)

$(MODELSIM): modelsim_bench.scr $(TEST_DEFINES_VLG) $(VPI_LIBS) work

        $(Q)echo; echo "\t### Compiling Xilinx support libs, user design & testbench ###"; echo

        $(Q)vlog $(QUIET) -nologo -incr $(BENCH_TOP) -f $<

        $(Q)vopt $(QUIET) glbl $(RTL_TESTBENCH_TOP) $(VOPT_ARGS) -o tb

        $(Q)echo; echo "\t### Launching simulation ###"; echo

        $(Q)vsim $(VSIM_ARGS) tb

.PHONY: rtl-test

rtl-test: clean-sim-test-sw sw-vmem clean-test-defines $(TEST_DEFINES_VLG) \

        $(SIMULATOR)

# Run an RTL test followed by checking of generated results

rtl-test-with-check: rtl-test

        $(Q)$(MAKE) check-test-log; \

        if [ $$? -ne 0 ]; then \

                echo; echo "\t### "$(TEST)" test FAIL ###"; echo; \

        else \

                echo; echo "\t### "$(TEST)" test OK ###"; echo; \

        fi

# Do check, don't print anything out

rtl-test-with-check-no-print: rtl-test check-test-log

# Main RTL test loop

rtl-tests:

        $(Q)for test in $(TESTS); do \

                export TEST=$$test; \

                $(MAKE) rtl-test-with-check-no-print; \

                if [ $$? -ne 0 ]; then break; fi; \

                echo; echo "\t### $$test test OK ###"; echo; \

        done

.PHONY: check-test-log

check-test-log:

        $(Q)echo "#!/bin/bash" > $@

        $(Q)echo "function check-test-log { if [ \`grep -c -i "$(TEST_OK_STRING)" "$(RTL_SIM_RESULTS_DIR)"/"$(TEST)$(TEST_OUT_FILE_SUFFIX)"\` -gt 0 ]; then return 0; else return 1; fi; }" >> $@

        $(Q)echo "check-test-log" >> $@

        $(Q)chmod +x $@

        $(Q) echo; echo "\t### Checking simulation results for "$(TEST)" test ###"; echo;

        $(Q)./$@

# Include the test-defines.v generation rule

include $(PROJECT_ROOT)/sim/bin/definesgen.inc

# Path for the current test

# First check for a local copy of the test. If it doesn't exist then we

# default to the software tests in the root directory

TEST_MODULE=$(shell echo $(TEST) | cut -d "-" -f 1)

BOARD_SW_TEST_DIR=$(BOARD_SW_DIR)/tests/$(TEST_MODULE)/sim

COMMON_SW_TEST_DIR=$(COMMON_SW_DIR)/tests/$(TEST_MODULE)/sim

# Do this by testing for the file's existence

TEST_SW_DIR=$(shell if [ -e $(BOARD_SW_TEST_DIR)/$(TEST).[cS] ]; then echo $(BOARD_SW_TEST_DIR); else echo $(COMMON_SW_TEST_DIR); fi)

print-test-sw-dir:

        @echo; echo "\tTest software is in the following path"; echo;

        @echo $(BOARD_SW_DIR); echo;

        @echo $(BOARD_SW_TEST_DIR); echo;

        @echo $(TEST_SW_DIR); echo;

print-sw-tests:

        $(Q) $(MAKE) -C $(COMMON_SW_DIR)/lib print-sw-tests

        $(Q) $(MAKE) -C $(COMMON_SW_DIR)/lib print-sw-tests-subdirs

# Name of the image the RAM model will attempt to load via Verilog $readmemh

# system function.

# Set PRELOAD_RAM=1 to preload the system memory - be sure the bootROM program

# chosen in board.h is the one booting from the reset vector.

ifeq ($(PRELOAD_RAM), 1)

SIM_DIR_VMEM_IMAGE ?=sram.vmem

else

SIM_DIR_VMEM_IMAGE ?=flash.in

endif

# Ability to bypass all stuffing around involved with generating software and

# directly specify an ELF

ifeq ($(USER_ELF),)

ELF_FILE=$(TEST_SW_DIR)/$(TEST).elf

else

ELF_FILE=$(USER_ELF)

ELF_FILE_NOTDIR=$(notdir $(USER_ELF))

ELF_FILE_NOTDIR_BASENAME=$(basename $(ELF_FILE_NOTDIR))

endif

# Rules allowing user to specify a pre-existing VMEM file to load into the

# simulation, instead of compiling a test.

ifeq ($(USER_VMEM),)

ifeq ($(PRELOAD_RAM), 1)

VMEM_FILE ?= $(TEST_SW_DIR)/$(TEST).vmem

else

VMEM_FILE ?= $(TEST_SW_DIR)/$(TEST).flashin

endif

.PHONY: $(VMEM_FILE)

# If USER_ELF was specified, then we need a slightly different way of

# generating the VMEM file from it than a usual test

ifeq ($(USER_ELF),)

$(SIM_DIR_VMEM_IMAGE): $(VMEM_FILE)

        $(Q)if [ -L $@ ]; then unlink $@; fi

        $(Q)if [ -e $@ ]; then rm $@; fi

        $(Q)ln -s $< $@

else # !($(USER_ELF),) - USER_ELF set on command line

$(SIM_DIR_VMEM_IMAGE): $(USER_ELF)

        $(Q)$(MAKE) -C $(COMMON_SW_DIR)/lib \

        USER_ELF_BIN=`pwd`/$(ELF_FILE_NOTDIR_BASENAME).bin \

        USER_ELF_VMEM=`pwd`/$(ELF_FILE_NOTDIR_BASENAME).vmem \

        gen-user-elf-vmem

        $(Q)cp -v $(ELF_FILE_NOTDIR_BASENAME).vmem $@

TEST=$(ELF_FILE_NOTDIR_BASENAME)

endif

else # !($(USER_VMEM),) - USER_VMEM set on command line

VMEM_FILE=$(USER_VMEM)

USER_VMEM_NOTDIR=$(notdir $(USER_VMEM))

TEST=$(basename $(USER_VMEM_NOTDIR))

$(SIM_DIR_VMEM_IMAGE): $(VMEM_FILE)

        cp -v $< $@

endif

# Amount to pad the image we'll load into the SPI flash for ML501 sims

HEX_IMAGE_PADDING ?=0x1c0000

.PHONY : sw-vmem sw-elf

sw-vmem: $(SIM_DIR_VMEM_IMAGE)

.PHONY: $(TEST_SW_DIR)/$(TEST).flashin

$(TEST_SW_DIR)/$(TEST).flashin:

        $(Q) echo; echo "\t### Compiling software ###"; echo;

        $(Q)$(MAKE) -C $(TEST_SW_DIR) $(TEST).flashin \

                HEX_IMAGE_PADDING=$(HEX_IMAGE_PADDING)

.PHONY: $(TEST_SW_DIR)/$(TEST).vmem

$(TEST_SW_DIR)/$(TEST).vmem:

        $(Q) echo; echo "\t### Compiling software ###"; echo;

        $(Q)$(MAKE) -C $(TEST_SW_DIR) $(TEST).vmem

# Create test software disassembly

sw-dis: $(TEST_SW_DIR)/$(TEST).dis

        $(Q)cp -v $< .

$(TEST_SW_DIR)/$(TEST).dis:

        $(Q)$(MAKE) -C $(TEST_SW_DIR) $(TEST).dis

clean-sim:

        $(Q) echo; echo "\t### Cleaning simulation run directory ###"; echo;

        $(Q)rm -rf *.* lib_* work transcript check-test-log

        $(Q) if [ -e $(VPI_SRC_C_DIR) ]; then $(MAKE) -C $(VPI_SRC_C_DIR) clean; fi

clean-bootrom:

        $(MAKE) -C $(BOARD_BOOTROM_SW_DIR) clean

clean-out:

        $(Q)rm -rf $(RTL_SIM_RESULTS_DIR)/*.*

clean-test-defines:

        $(Q)rm -f $(TEST_DEFINES_VLG)

clean-sim-test-sw:

        $(Q)if [ -L $(SIM_DIR_VMEM_IMAGE) ]; then unlink $(SIM_DIR_VMEM_IMAGE); fi

clean-sw:

        $(Q) echo; echo "\t### Cleaning simulation sw directories ###"; echo;

        $(Q) $(MAKE) -C $(COMMON_SW_DIR)/lib distclean

clean-rtl:

        $(Q) echo; echo "\t### Cleaning generated verilog RTL ###"; echo;

        for module in $(RTL_TO_CHECK); do \

                $(MAKE) -C $(RTL_VERILOG_DIR)/$$module clean; \

        done

# Removes any checked out RTL

distclean: clean

        $(Q) echo; echo "\t### Cleaning generated verilog RTL ###"; echo;

        $(Q)for module in $(RTL_TO_CHECK); do \

                $(MAKE) -C $(RTL_VERILOG_DIR)/$$module distclean; \

        done

include $(PROJECT_ROOT)/scripts/make/Makefile-board-simclean.inc