Subversion Repositories openrisc_me

#ifndef _BOARD_H_

#define _BOARD_H_

#define IN_CLK                50000000 // Hz

//#define IN_CLK              32000000 // Hz

//#define IN_CLK              30000000 // HZ

//#define IN_CLK              24000000 // HZ

//#define IN_CLK              20000000 // HZ

//#define IN_CLK              18000000 // HZ

//#define IN_CLK              16000000 // HZ

//

// ROM bootloader

//

// Uncomment the appropriate bootloader define. This will effect the bootrom.S

// file, which is compiled and converted into Verilog for inclusion at 

// synthesis time. See bootloader/bootloader.S for details on each option.

//#define BOOTROM_SPI_FLASH

#define BOOTROM_GOTO_RESET

//#define BOOTROM_LOOP_AT_ZERO

//#define BOOTROM_LOOP_IN_ROM

//

// Defines for each core (memory map base, OR1200 interrupt line number, etc.)

//

#define SDRAM_BASE                 0x0

#define GPIO_0_BASE         0x91000000

#define UART0_BASE          0x90000000

#define UART0_IRQ                    2

#define UART0_BAUD_RATE         115200

#define SPI0_BASE           0xb0000000

#define SPI0_IRQ                     6

#define I2C_0_BASE          0xa0000000

#define I2C_0_IRQ                   10

#define I2C_1_BASE          0xa1000000

#define I2C_1_IRQ                   11

#define ETH0_BASE            0x92000000

#define ETH0_IRQ                      4

#define ETH_MACADDR0               0x00

#define ETH_MACADDR1               0x12

#define ETH_MACADDR2               0x34

#define ETH_MACADDR3               0x56

#define ETH_MACADDR4               0x78

#define ETH_MACADDR5               0x9a

//

// OR1200 tick timer period define

//

#define TICKS_PER_SEC   100

#endif