OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [or1200/] [or1200_immu_top.v] - Diff between revs 358 and 360

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 358 Rev 360
Line 1... Line 1...
 
//////////////////////////////////////////////////////////////////////
 
////                                                              ////
 
////  OR1200's Instruction MMU top level                          ////
 
////                                                              ////
 
////  This file is part of the OpenRISC 1200 project              ////
 
////  http://www.opencores.org/cores/or1k/                        ////
 
////                                                              ////
 
////  Description                                                 ////
 
////  Instantiation of all IMMU blocks.                           ////
 
////                                                              ////
 
////  To Do:                                                      ////
 
////   - cache inhibit                                            ////
 
////                                                              ////
 
////  Author(s):                                                  ////
 
////      - Damjan Lampret, lampret@opencores.org                 ////
 
////                                                              ////
 
//////////////////////////////////////////////////////////////////////
 
////                                                              ////
 
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
 
////                                                              ////
 
//// This source file may be used and distributed without         ////
 
//// restriction provided that this copyright statement is not    ////
 
//// removed from the file and that any derivative work contains  ////
 
//// the original copyright notice and the associated disclaimer. ////
 
////                                                              ////
 
//// This source file is free software; you can redistribute it   ////
 
//// and/or modify it under the terms of the GNU Lesser General   ////
 
//// Public License as published by the Free Software Foundation; ////
 
//// either version 2.1 of the License, or (at your option) any   ////
 
//// later version.                                               ////
 
////                                                              ////
 
//// This source is distributed in the hope that it will be       ////
 
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
 
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
 
//// PURPOSE.  See the GNU Lesser General Public License for more ////
 
//// details.                                                     ////
 
////                                                              ////
 
//// You should have received a copy of the GNU Lesser General    ////
 
//// Public License along with this source; if not, download it   ////
 
//// from http://www.opencores.org/lgpl.shtml                     ////
 
////                                                              ////
 
//////////////////////////////////////////////////////////////////////
 
//
 
// CVS Revision History
 
//
 
// $Log: or1200_immu_top.v,v $
 
// Revision 2.0  2010/06/30 11:00:00  ORSoC
 
// Major update: 
 
// Structure reordered and bugs fixed. 
 
//
 
// Revision 1.15  2004/06/08 18:17:36  lampret
 
// Non-functional changes. Coding style fixes.
 
//
 
// Revision 1.14  2004/04/05 08:29:57  lampret
 
// Merged branch_qmem into main tree.
 
//
 
// Revision 1.12.4.2  2003/12/09 11:46:48  simons
 
// Mbist nameing changed, Artisan ram instance signal names fixed, some synthesis waning fixed.
 
//
 
// Revision 1.12.4.1  2003/07/08 15:36:37  lampret
 
// Added embedded memory QMEM.
 
//
 
// Revision 1.12  2003/06/06 02:54:47  lampret
 
// When OR1200_NO_IMMU and OR1200_NO_IC are not both defined or undefined at the same time, results in a IC bug. Fixed.
 
//
 
// Revision 1.11  2002/10/17 20:04:40  lampret
 
// Added BIST scan. Special VS RAMs need to be used to implement BIST.
 
//
 
// Revision 1.10  2002/09/16 03:08:56  lampret
 
// Disabled cache inhibit atttribute.
 
//
 
// Revision 1.9  2002/08/18 19:54:17  lampret
 
// Added store buffer.
 
//
 
// Revision 1.8  2002/08/14 06:23:50  lampret
 
// Disabled ITLB translation when 1) doing access to ITLB SPRs or 2) crossing page. This modification was tested only with parts of IMMU test - remaining test cases needs to be run.
 
//
 
// Revision 1.7  2002/08/12 05:31:30  lampret
 
// Delayed external access at page crossing.
 
//
 
// Revision 1.6  2002/03/29 15:16:56  lampret
 
// Some of the warnings fixed.
 
//
 
// Revision 1.5  2002/02/11 04:33:17  lampret
 
// Speed optimizations (removed duplicate _cyc_ and _stb_). Fixed D/IMMU cache-inhibit attr.
 
//
 
// Revision 1.4  2002/02/01 19:56:54  lampret
 
// Fixed combinational loops.
 
//
 
// Revision 1.3  2002/01/28 01:16:00  lampret
 
// Changed 'void' nop-ops instead of insn[0] to use insn[16]. Debug unit stalls the tick timer. Prepared new flag generation for add and and insns. Blocked DC/IC while they are turned off. Fixed I/D MMU SPRs layout except WAYs. TODO: smart IC invalidate, l.j 2 and TLB ways.
 
//
 
// Revision 1.2  2002/01/14 06:18:22  lampret
 
// Fixed mem2reg bug in FAST implementation. Updated debug unit to work with new genpc/if.
 
//
 
// Revision 1.1  2002/01/03 08:16:15  lampret
 
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.
 
//
 
// Revision 1.6  2001/10/21 17:57:16  lampret
 
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.
 
//
 
// Revision 1.5  2001/10/14 13:12:09  lampret
 
// MP3 version.
 
//
 
// Revision 1.1.1.1  2001/10/06 10:18:36  igorm
 
// no message
 
//
 
// Revision 1.1  2001/08/17 08:03:35  lampret
 
// *** empty log message ***
 
//
 
// Revision 1.2  2001/07/22 03:31:53  lampret
 
// Fixed RAM's oen bug. Cache bypass under development.
 
//
 
// Revision 1.1  2001/07/20 00:46:03  lampret
 
// Development version of RTL. Libraries are missing.
 
//
 
//
 
 
 
// synopsys translate_off
 
`include "timescale.v"
 
// synopsys translate_on
 
`include "or1200_defines.v"
 
 
 
//
 
// Insn MMU
 
//
 
 
 
module or1200_immu_top(
 
        // Rst and clk
 
        clk, rst,
 
 
 
        // CPU i/f
 
        ic_en, immu_en, supv, icpu_adr_i, icpu_cycstb_i,
 
        icpu_adr_o, icpu_tag_o, icpu_rty_o, icpu_err_o,
 
 
 
        // SR Interface
 
        boot_adr_sel_i,
 
 
 
        // SPR access
 
        spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o,
 
 
 
`ifdef OR1200_BIST
 
        // RAM BIST
 
        mbist_si_i, mbist_so_o, mbist_ctrl_i,
 
`endif
 
 
 
        // QMEM i/f
 
        qmemimmu_rty_i, qmemimmu_err_i, qmemimmu_tag_i, qmemimmu_adr_o, qmemimmu_cycstb_o, qmemimmu_ci_o
 
);
 
 
 
parameter dw = `OR1200_OPERAND_WIDTH;
 
parameter aw = `OR1200_OPERAND_WIDTH;
 
 
 
//
 
// I/O
 
//
 
 
 
//
 
// Clock and reset
 
//
 
input                           clk;
 
input                           rst;
 
 
 
//
 
// CPU I/F
 
//
 
input                           ic_en;
 
input                           immu_en;
 
input                           supv;
 
input   [aw-1:0]         icpu_adr_i;
 
input                           icpu_cycstb_i;
 
output  [aw-1:0]         icpu_adr_o;
 
output  [3:0]                    icpu_tag_o;
 
output                          icpu_rty_o;
 
output                          icpu_err_o;
 
 
 
//
 
// SR Interface
 
//
 
input                           boot_adr_sel_i;
 
 
 
//
 
// SPR access
 
//
 
input                           spr_cs;
 
input                           spr_write;
 
input   [aw-1:0]         spr_addr;
 
input   [31:0]                   spr_dat_i;
 
output  [31:0]                   spr_dat_o;
 
 
 
`ifdef OR1200_BIST
 
//
 
// RAM BIST
 
//
 
input mbist_si_i;
 
input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;
 
output mbist_so_o;
 
`endif
 
 
 
//
 
// IC I/F
 
//
 
input                           qmemimmu_rty_i;
 
input                           qmemimmu_err_i;
 
input   [3:0]                    qmemimmu_tag_i;
 
output  [aw-1:0]         qmemimmu_adr_o;
 
output                          qmemimmu_cycstb_o;
 
output                          qmemimmu_ci_o;
 
 
 
//
 
// Internal wires and regs
 
//
 
wire                            itlb_spr_access;
 
wire    [31:`OR1200_IMMU_PS]    itlb_ppn;
 
wire                            itlb_hit;
 
wire                            itlb_uxe;
 
wire                            itlb_sxe;
 
wire    [31:0]                   itlb_dat_o;
 
wire                            itlb_en;
 
wire                            itlb_ci;
 
wire                            itlb_done;
 
wire                            fault;
 
wire                            miss;
 
wire                            page_cross;
 
reg     [31:0]                   icpu_adr_default;
 
wire    [31:0]                   icpu_adr_boot;
 
reg                             icpu_adr_select;
 
reg             [31:0]           icpu_adr_o;
 
reg     [31:`OR1200_IMMU_PS]    icpu_vpn_r;
 
`ifdef OR1200_NO_IMMU
 
`else
 
reg                             itlb_en_r;
 
reg                             dis_spr_access_frst_clk;
 
reg                             dis_spr_access_scnd_clk;
 
`endif
 
 
 
//
 
// Implemented bits inside match and translate registers
 
//
 
// itlbwYmrX: vpn 31-10  v 0
 
// itlbwYtrX: ppn 31-10  uxe 7  sxe 6
 
//
 
// itlb memory width:
 
// 19 bits for ppn
 
// 13 bits for vpn
 
// 1 bit for valid
 
// 2 bits for protection
 
// 1 bit for cache inhibit
 
 
 
//
 
// icpu_adr_o
 
//
 
`ifdef OR1200_REGISTERED_OUTPUTS
 
always @(`OR1200_RST_EVENT rst or posedge clk)
 
        // default value 
 
        if (rst == `OR1200_RST_VALUE) begin
 
                icpu_adr_default <=  32'h0000_0100;
 
                icpu_adr_select  <=  1'b1;              // select async. value due to reset state
 
        end
 
        // selected value (different from default) is written into FF after reset state
 
        else if (icpu_adr_select) begin
 
                icpu_adr_default <=  icpu_adr_boot;     // dynamic value can only be assigned to FF out of reset! 
 
                icpu_adr_select  <=  1'b0;              // select FF value 
 
        end
 
        else begin
 
                icpu_adr_default <=  icpu_adr_i;
 
        end
 
 
 
// select async. value for boot address after reset - PC jumps to the address selected after boot! 
 
//assign icpu_adr_boot = {(boot_adr_sel_i ? `OR1200_EXCEPT_EPH1_P : `OR1200_EXCEPT_EPH0_P), 12'h100} ;
 
   assign icpu_adr_boot = `OR1200_BOOT_ADR; // jb
 
 
 
always @(icpu_adr_boot or icpu_adr_default or icpu_adr_select)
 
        if (icpu_adr_select)
 
                icpu_adr_o = icpu_adr_boot ;            // async. value is selected due to reset state 
 
        else
 
                icpu_adr_o = icpu_adr_default ;         // FF value is selected 2nd clock after reset state 
 
`else
 
Unsupported !!!
 
`endif
 
 
 
//
 
// Page cross
 
//
 
// Asserted when CPU address crosses page boundary. Most of the time it is zero.
 
//
 
assign page_cross = icpu_adr_i[31:`OR1200_IMMU_PS] != icpu_vpn_r;
 
 
 
//
 
// Register icpu_adr_i's VPN for use when IMMU is not enabled but PPN is expected to come
 
// one clock cycle after offset part.
 
//
 
always @(posedge clk or `OR1200_RST_EVENT rst)
 
        if (rst == `OR1200_RST_VALUE)
 
                icpu_vpn_r <=  {32-`OR1200_IMMU_PS{1'b0}};
 
        else
 
                icpu_vpn_r <=  icpu_adr_i[31:`OR1200_IMMU_PS];
 
 
 
`ifdef OR1200_NO_IMMU
 
 
 
//
 
// Put all outputs in inactive state
 
//
 
assign spr_dat_o = 32'h00000000;
 
assign qmemimmu_adr_o = icpu_adr_i;
 
assign icpu_tag_o = qmemimmu_tag_i;
 
assign qmemimmu_cycstb_o = icpu_cycstb_i & ~page_cross;
 
assign icpu_rty_o = qmemimmu_rty_i;
 
assign icpu_err_o = qmemimmu_err_i;
 
assign qmemimmu_ci_o = `OR1200_IMMU_CI;
 
`ifdef OR1200_BIST
 
assign mbist_so_o = mbist_si_i;
 
`endif
 
`else
 
 
 
//
 
// ITLB SPR access
 
//
 
// 1200 - 12FF  itlbmr w0
 
// 1200 - 123F  itlbmr w0 [63:0]
 
//
 
// 1300 - 13FF  itlbtr w0
 
// 1300 - 133F  itlbtr w0 [63:0]
 
//
 
assign itlb_spr_access = spr_cs & ~dis_spr_access_scnd_clk;
 
 
 
//
 
// Disable ITLB SPR access
 
//
 
// This flops are used to mask ITLB miss/fault exception
 
// during first & second clock cycles of accessing ITLB SPR. In
 
// subsequent clock cycles it is assumed that ITLB SPR
 
// access was accomplished and that normal instruction fetching
 
// can proceed.
 
//
 
// spr_cs sets dis_spr_access_frst_clk and icpu_rty_o clears it.
 
// dis_spr_access_frst_clk  sets dis_spr_access_scnd_clk and 
 
// icpu_rty_o clears it.
 
//
 
always @(posedge clk or `OR1200_RST_EVENT rst)
 
        if (rst == `OR1200_RST_VALUE)
 
                dis_spr_access_frst_clk  <=  1'b0;
 
        else if (!icpu_rty_o)
 
                dis_spr_access_frst_clk  <=  1'b0;
 
        else if (spr_cs)
 
                dis_spr_access_frst_clk  <=  1'b1;
 
 
 
always @(posedge clk or `OR1200_RST_EVENT rst)
 
        if (rst == `OR1200_RST_VALUE)
 
                dis_spr_access_scnd_clk  <=  1'b0;
 
        else if (!icpu_rty_o)
 
                dis_spr_access_scnd_clk  <=  1'b0;
 
        else if (dis_spr_access_frst_clk)
 
                dis_spr_access_scnd_clk  <=  1'b1;
 
 
 
//
 
// Tags:
 
//
 
// OR1200_ITAG_TE - TLB miss Exception
 
// OR1200_ITAG_PE - Page fault Exception
 
//
 
assign icpu_tag_o = miss ? `OR1200_ITAG_TE : fault ? `OR1200_ITAG_PE : qmemimmu_tag_i;
 
 
 
//
 
// icpu_rty_o
 
//
 
// assign icpu_rty_o = !icpu_err_o & qmemimmu_rty_i;
 
//assign icpu_rty_o = qmemimmu_rty_i | itlb_spr_access & immu_en;
 
assign icpu_rty_o = qmemimmu_rty_i;
 
 
 
//
 
// icpu_err_o
 
//
 
assign icpu_err_o = miss | fault | qmemimmu_err_i;
 
 
 
//
 
// Assert itlb_en_r after one clock cycle and when there is no
 
// ITLB SPR access
 
//
 
always @(posedge clk or `OR1200_RST_EVENT rst)
 
        if (rst == `OR1200_RST_VALUE)
 
                itlb_en_r <=  1'b0;
 
        else
 
                itlb_en_r <=  itlb_en & ~itlb_spr_access;
 
 
 
//
 
// ITLB lookup successful
 
//
 
assign itlb_done = itlb_en_r & ~page_cross;
 
 
 
//
 
// Cut transfer when access (mtspr/mfspr) to/from ITLB occure or if something goes 
 
// wrong with translation. If IC is disabled, use delayed signals.
 
//
 
// assign qmemimmu_cycstb_o = (!ic_en & immu_en) ? ~(miss | fault) & icpu_cycstb_i & ~page_cross : (miss | fault) ? 1'b0 : icpu_cycstb_i & ~page_cross; // DL
 
//assign qmemimmu_cycstb_o = immu_en ? ~(miss | fault) & icpu_cycstb_i & ~page_cross & itlb_done : icpu_cycstb_i & ~page_cross;
 
assign qmemimmu_cycstb_o = immu_en ? ~(miss | fault) & icpu_cycstb_i & ~page_cross & itlb_done & ~itlb_spr_access : icpu_cycstb_i & ~page_cross;
 
 
 
//
 
// Cache Inhibit
 
//
 
// Cache inhibit is not really needed for instruction memory subsystem.
 
// If we would doq it, we would doq it like this.
 
// assign qmemimmu_ci_o = immu_en ? itlb_done & itlb_ci : `OR1200_IMMU_CI;
 
// However this causes an async combinatorial loop so we stick to
 
// no cache inhibit.
 
//assign qmemimmu_ci_o = `OR1200_IMMU_CI;
 
// Cache inhibit without an async combinatorial loop 
 
assign qmemimmu_ci_o = immu_en ? itlb_ci : `OR1200_IMMU_CI;
 
 
 
 
 
//
 
// Physical address is either translated virtual address or
 
// simply equal when IMMU is disabled
 
//
 
//assign qmemimmu_adr_o = itlb_done ? {itlb_ppn, icpu_adr_i[`OR1200_IMMU_PS-1:0]} : {icpu_vpn_r, icpu_adr_i[`OR1200_IMMU_PS-1:0]}; // DL: immu_en
 
assign qmemimmu_adr_o = immu_en & itlb_done ? {itlb_ppn, icpu_adr_i[`OR1200_IMMU_PS-1:2], 2'h0} : {icpu_vpn_r, icpu_adr_i[`OR1200_IMMU_PS-1:2], 2'h0};
 
 
 
reg     [31:0]                  spr_dat_reg;
 
//
 
// Output to SPRS unit
 
//
 
// spr_dat_o is registered on the 1st clock of spr read 
 
// so itlb can continue with process during execution of mfspr.
 
always @(posedge clk or `OR1200_RST_EVENT rst)
 
        if (rst == `OR1200_RST_VALUE)
 
                spr_dat_reg <=  32'h0000_0000;
 
        else if (spr_cs & !dis_spr_access_scnd_clk)
 
                spr_dat_reg <=  itlb_dat_o;
 
 
 
assign spr_dat_o = itlb_spr_access ? itlb_dat_o : spr_dat_reg;
 
 
 
//
 
// Page fault exception logic
 
//
 
assign fault = itlb_done &
 
                        (  (!supv & !itlb_uxe)          // Execute in user mode not enabled
 
                        || (supv & !itlb_sxe));         // Execute in supv mode not enabled
 
 
 
//
 
// TLB Miss exception logic
 
//
 
assign miss = itlb_done & !itlb_hit;
 
 
 
//
 
// ITLB Enable
 
//
 
assign itlb_en = immu_en & icpu_cycstb_i;
 
 
 
//
 
// Instantiation of ITLB
 
//
 
or1200_immu_tlb or1200_immu_tlb(
 
        // Rst and clk
 
        .clk(clk),
 
        .rst(rst),
 
 
 
        // I/F for translation
 
        .tlb_en(itlb_en),
 
        .vaddr(icpu_adr_i),
 
        .hit(itlb_hit),
 
        .ppn(itlb_ppn),
 
        .uxe(itlb_uxe),
 
        .sxe(itlb_sxe),
 
        .ci(itlb_ci),
 
 
 
`ifdef OR1200_BIST
 
        // RAM BIST
 
        .mbist_si_i(mbist_si_i),
 
        .mbist_so_o(mbist_so_o),
 
        .mbist_ctrl_i(mbist_ctrl_i),
 
`endif
 
 
 
        // SPR access
 
        .spr_cs(itlb_spr_access),
 
        .spr_write(spr_write),
 
        .spr_addr(spr_addr),
 
        .spr_dat_i(spr_dat_i),
 
        .spr_dat_o(itlb_dat_o)
 
);
 
 
 
`endif
 
 
 
endmodule
 
 
 No newline at end of file
 No newline at end of file

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.