Subversion Repositories openrisc

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  OR1200's register file inside CPU                           ////

////                                                              ////

////  This file is part of the OpenRISC 1200 project              ////

////  http://www.opencores.org/project,or1k                       ////

////                                                              ////

////  Description                                                 ////

////  Instantiation of register file memories                     ////

////                                                              ////

////  To Do:                                                      ////

////   - make it smaller and faster                               ////

////                                                              ////

////  Author(s):                                                  ////

////      - Damjan Lampret, lampret@opencores.org                 ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// $Log: or1200_rf.v,v $

// Revision 2.0  2010/06/30 11:00:00  ORSoC

// Minor update: 

// Bugs fixed, coding style changed. 

//

// synopsys translate_off

`include "timescale.v"

// synopsys translate_on

`include "or1200_defines.v"

module or1200_rf(

        // Clock and reset

        clk, rst,

        // Write i/f

        cy_we_i, cy_we_o, supv, wb_freeze, addrw, dataw, we, flushpipe,

        // Read i/f

        id_freeze, addra, addrb, dataa, datab, rda, rdb,

        // Debug

        spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o, du_read

);

parameter dw = `OR1200_OPERAND_WIDTH;

parameter aw = `OR1200_REGFILE_ADDR_WIDTH;

//

// I/O

//

//

// Clock and reset

//

input                           clk;

input                           rst;

//

// Write i/f

//

input                           cy_we_i;

output                          cy_we_o;

input                           supv;

input                           wb_freeze;

input   [aw-1:0]         addrw;

input   [dw-1:0]         dataw;

input                           we;

input                           flushpipe;

//

// Read i/f

//

input                           id_freeze;

input   [aw-1:0]         addra;

input   [aw-1:0]         addrb;

output  [dw-1:0]         dataa;

output  [dw-1:0]         datab;

input                           rda;

input                           rdb;

//

// SPR access for debugging purposes

//

input                           spr_cs;

input                           spr_write;

input   [31:0]                   spr_addr;

input   [31:0]                   spr_dat_i;

output  [31:0]                   spr_dat_o;

input                           du_read;

//

// Internal wires and regs

//

wire    [dw-1:0]         from_rfa;

wire    [dw-1:0]         from_rfb;

wire    [aw-1:0]         rf_addra;

wire    [aw-1:0]         rf_addrw;

wire    [dw-1:0]         rf_dataw;

wire                            rf_we;

wire                            spr_valid;

wire                            rf_ena;

wire                            rf_enb;

reg                             rf_we_allow;

   // Logic to restore output on RFA after debug unit has read out via SPR if.

   // Problem was that the incorrect output would be on RFA after debug unit

   // had read out  - this is bad if that output is relied upon by execute

   // stage for next instruction. We simply save the last address for rf A and

   // and re-read it whenever the SPR select goes low, so we must remember

   // the last address and generate a signal for falling edge of SPR cs.

   // -- Julius

   // Detect falling edge of SPR select 

   reg                          spr_du_cs;

   wire                         spr_cs_fe;

   // Track RF A's address each time it's enabled

   reg  [aw-1:0]         addra_last;

   always @(posedge clk)

     if (rf_ena & !(spr_cs_fe | (du_read & spr_cs)))

       addra_last <= addra;

   always @(posedge clk)

     spr_du_cs <= spr_cs & du_read;

   assign spr_cs_fe = spr_du_cs & !(spr_cs & du_read);

//

// SPR access is valid when spr_cs is asserted and

// SPR address matches GPR addresses

//

assign spr_valid = spr_cs & (spr_addr[10:5] == `OR1200_SPR_RF);

//

// SPR data output is always from RF A

//

assign spr_dat_o = from_rfa;

//

// Operand A comes from RF or from saved A register

//

assign dataa = from_rfa;

//

// Operand B comes from RF or from saved B register

//

assign datab = from_rfb;

//

// RF A read address is either from SPRS or normal from CPU control

//

assign rf_addra = (spr_valid & !spr_write) ? spr_addr[4:0] :

                  spr_cs_fe ? addra_last : addra;

//

// RF write address is either from SPRS or normal from CPU control

//

assign rf_addrw = (spr_valid & spr_write) ? spr_addr[4:0] : addrw;

//

// RF write data is either from SPRS or normal from CPU datapath

//

assign rf_dataw = (spr_valid & spr_write) ? spr_dat_i : dataw;

//

// RF write enable is either from SPRS or normal from CPU control

//

always @(`OR1200_RST_EVENT rst or posedge clk)

        if (rst == `OR1200_RST_VALUE)

                rf_we_allow <=  1'b1;

        else if (~wb_freeze)

                rf_we_allow <=  ~flushpipe;

//assign rf_we = ((spr_valid & spr_write) | (we & ~wb_freeze)) & rf_we_allow & (supv | (|rf_addrw));

assign rf_we = ((spr_valid & spr_write) | (we & ~wb_freeze)) & rf_we_allow;

//assign cy_we_o = cy_we_i && rf_we;

assign cy_we_o = cy_we_i && ~wb_freeze && rf_we_allow;

//

// CS RF A asserted when instruction reads operand A and ID stage

// is not stalled

//

//assign rf_ena = rda & ~id_freeze | spr_valid; // probably works with fixed binutils

assign rf_ena = (rda & ~id_freeze) | (spr_valid & !spr_write) | spr_cs_fe;      // probably works with fixed binutils

// assign rf_ena = 1'b1;                        // does not work with single-stepping

//assign rf_ena = ~id_freeze | spr_valid;       // works with broken binutils 

//

// CS RF B asserted when instruction reads operand B and ID stage

// is not stalled

//

//assign rf_enb = rdb & ~id_freeze | spr_valid;

assign rf_enb = rdb & ~id_freeze;

// assign rf_enb = 1'b1;

//assign rf_enb = ~id_freeze | spr_valid;       // works with broken binutils 

`ifdef OR1200_RFRAM_TWOPORT

//

// Instantiation of register file two-port RAM A

//

or1200_tpram_32x32 rf_a(

        // Port A

        .clk_a(clk),

        .rst_a(rst),

        .ce_a(rf_ena),

        .we_a(1'b0),

        .oe_a(1'b1),

        .addr_a(rf_addra),

        .di_a(32'h0000_0000),

        .do_a(from_rfa),

        // Port B

        .clk_b(clk),

        .rst_b(rst),

        .ce_b(rf_we),

        .we_b(rf_we),

        .oe_b(1'b0),

        .addr_b(rf_addrw),

        .di_b(rf_dataw),

        .do_b()

);

//

// Instantiation of register file two-port RAM B

//

or1200_tpram_32x32 rf_b(

        // Port A

        .clk_a(clk),

        .rst_a(rst),

        .ce_a(rf_enb),

        .we_a(1'b0),

        .oe_a(1'b1),

        .addr_a(addrb),

        .di_a(32'h0000_0000),

        .do_a(from_rfb),

        // Port B

        .clk_b(clk),

        .rst_b(rst),

        .ce_b(rf_we),

        .we_b(rf_we),

        .oe_b(1'b0),

        .addr_b(rf_addrw),

        .di_b(rf_dataw),

        .do_b()

);

`else

`ifdef OR1200_RFRAM_DUALPORT

//

// Instantiation of register file two-port RAM A

//

   or1200_dpram #

     (

      .aw(5),

      .dw(32)

      )

   rf_a

     (

      // Port A

      .clk_a(clk),

      .ce_a(rf_ena),

      .addr_a(rf_addra),

      .do_a(from_rfa),

      // Port B

      .clk_b(clk),

      .ce_b(rf_we),

      .we_b(rf_we),

      .addr_b(rf_addrw),

      .di_b(rf_dataw)

      );

   //

   // Instantiation of register file two-port RAM B

   //

   or1200_dpram #

     (

      .aw(5),

      .dw(32)

      )

   rf_b

     (

      // Port A

      .clk_a(clk),

      .ce_a(rf_enb),

      .addr_a(addrb),

      .do_a(from_rfb),

      // Port B

      .clk_b(clk),

      .ce_b(rf_we),

      .we_b(rf_we),

      .addr_b(rf_addrw),

      .di_b(rf_dataw)

      );

`else

`ifdef OR1200_RFRAM_GENERIC

//

// Instantiation of generic (flip-flop based) register file

//

or1200_rfram_generic rf_a(

        // Clock and reset

        .clk(clk),

        .rst(rst),

        // Port A

        .ce_a(rf_ena),

        .addr_a(rf_addra),

        .do_a(from_rfa),

        // Port B

        .ce_b(rf_enb),

        .addr_b(addrb),

        .do_b(from_rfb),

        // Port W

        .ce_w(rf_we),

        .we_w(rf_we),

        .addr_w(rf_addrw),

        .di_w(rf_dataw)

);

`else

//

// RFRAM type not specified

//

initial begin

        $display("Define RFRAM type.");

        $finish;

end

`endif

`endif

`endif

endmodule