OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [uart16550/] [uart16550.v] - Diff between revs 44 and 360

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 44 Rev 360
Line 1... Line 1...
 
//////////////////////////////////////////////////////////////////////
 
////                                                              ////
 
////  uart_top.v                                                  ////
 
////                                                              ////
 
////                                                              ////
 
////  This file is part of the "UART 16550 compatible" project    ////
 
////  http://www.opencores.org/cores/uart16550/                   ////
 
////                                                              ////
 
////  Documentation related to this project:                      ////
 
////  - http://www.opencores.org/cores/uart16550/                 ////
 
////                                                              ////
 
////  Projects compatibility:                                     ////
 
////  - WISHBONE                                                  ////
 
////  RS232 Protocol                                              ////
 
////  16550D uart (mostly supported)                              ////
 
////                                                              ////
 
////  Overview (main Features):                                   ////
 
////  UART core top level.                                        ////
 
////                                                              ////
 
////  Known problems (limits):                                    ////
 
////  Note that transmitter and receiver instances are inside     ////
 
////  the uart_regs.v file.                                       ////
 
////                                                              ////
 
////  To Do:                                                      ////
 
////  Nothing so far.                                             ////
 
////                                                              ////
 
////  Author(s):                                                  ////
 
////      - gorban@opencores.org                                  ////
 
////      - Jacob Gorban                                          ////
 
////      - Igor Mohor (igorm@opencores.org)                      ////
 
////                                                              ////
 
////  Created:        2001/05/12                                  ////
 
////  Last Updated:   2001/05/17                                  ////
 
////                  (See log for the revision history)          ////
 
////                                                              ////
 
////                                                              ////
 
//////////////////////////////////////////////////////////////////////
 
////                                                              ////
 
//// Copyright (C) 2000, 2001 Authors                             ////
 
////                                                              ////
 
//// This source file may be used and distributed without         ////
 
//// restriction provided that this copyright statement is not    ////
 
//// removed from the file and that any derivative work contains  ////
 
//// the original copyright notice and the associated disclaimer. ////
 
////                                                              ////
 
//// This source file is free software; you can redistribute it   ////
 
//// and/or modify it under the terms of the GNU Lesser General   ////
 
//// Public License as published by the Free Software Foundation; ////
 
//// either version 2.1 of the License, or (at your option) any   ////
 
//// later version.                                               ////
 
////                                                              ////
 
//// This source is distributed in the hope that it will be       ////
 
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
 
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
 
//// PURPOSE.  See the GNU Lesser General Public License for more ////
 
//// details.                                                     ////
 
////                                                              ////
 
//// You should have received a copy of the GNU Lesser General    ////
 
//// Public License along with this source; if not, download it   ////
 
//// from http://www.opencores.org/lgpl.shtml                     ////
 
////                                                              ////
 
//////////////////////////////////////////////////////////////////////
 
//
 
// CVS Revision History
 
//
 
// $Log: not supported by cvs2svn $
 
// Revision 1.18  2002/07/22 23:02:23  gorban
 
// Bug Fixes:
 
//  * Possible loss of sync and bad reception of stop bit on slow baud rates fixed.
 
//   Problem reported by Kenny.Tung.
 
//  * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers.
 
//
 
// Improvements:
 
//  * Made FIFO's as general inferrable memory where possible.
 
//  So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx).
 
//  This saves about 1/3 of the Slice count and reduces P&R and synthesis times.
 
//
 
//  * Added optional baudrate output (baud_o).
 
//  This is identical to BAUDOUT* signal on 16550 chip.
 
//  It outputs 16xbit_clock_rate - the divided clock.
 
//  It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use.
 
//
 
// Revision 1.17  2001/12/19 08:40:03  mohor
 
// Warnings fixed (unused signals removed).
 
//
 
// Revision 1.16  2001/12/06 14:51:04  gorban
 
// Bug in LSR[0] is fixed.
 
// All WISHBONE signals are now sampled, so another wait-state is introduced on all transfers.
 
//
 
// Revision 1.15  2001/12/03 21:44:29  gorban
 
// Updated specification documentation.
 
// Added full 32-bit data bus interface, now as default.
 
// Address is 5-bit wide in 32-bit data bus mode.
 
// Added wb_sel_i input to the core. It's used in the 32-bit mode.
 
// Added debug interface with two 32-bit read-only registers in 32-bit mode.
 
// Bits 5 and 6 of LSR are now only cleared on TX FIFO write.
 
// My small test bench is modified to work with 32-bit mode.
 
//
 
// Revision 1.14  2001/11/07 17:51:52  gorban
 
// Heavily rewritten interrupt and LSR subsystems.
 
// Many bugs hopefully squashed.
 
//
 
// Revision 1.13  2001/10/20 09:58:40  gorban
 
// Small synopsis fixes
 
//
 
// Revision 1.12  2001/08/25 15:46:19  gorban
 
// Modified port names again
 
//
 
// Revision 1.11  2001/08/24 21:01:12  mohor
 
// Things connected to parity changed.
 
// Clock devider changed.
 
//
 
// Revision 1.10  2001/08/23 16:05:05  mohor
 
// Stop bit bug fixed.
 
// Parity bug fixed.
 
// WISHBONE read cycle bug fixed,
 
// OE indicator (Overrun Error) bug fixed.
 
// PE indicator (Parity Error) bug fixed.
 
// Register read bug fixed.
 
//
 
// Revision 1.4  2001/05/31 20:08:01  gorban
 
// FIFO changes and other corrections.
 
//
 
// Revision 1.3  2001/05/21 19:12:02  gorban
 
// Corrected some Linter messages.
 
//
 
// Revision 1.2  2001/05/17 18:34:18  gorban
 
// First 'stable' release. Should be sythesizable now. Also added new header.
 
//
 
// Revision 1.0  2001-05-17 21:27:12+02  jacob
 
// Initial revision
 
//
 
//
 
// synopsys translate_off
 
`include "timescale.v"
 
// synopsys translate_on
 
 
 
`include "uart_defines.v"
 
 
 
//module uart_top       (
 
module uart16550( // renamed by Julius
 
                  wb_clk_i,
 
 
 
                  // Wishbone signals
 
                  wb_rst_i, wb_adr_i, wb_dat_i, wb_we_i, wb_dat_o,
 
`ifndef DATA_BUS_WIDTH_8
 
                  wb_sel_i,
 
`endif
 
                  wb_stb_i, wb_cyc_i, wb_ack_o,
 
                  int_o, // interrupt request
 
 
 
                  // UART       signals
 
                  // serial input/output
 
                  stx_pad_o, srx_pad_i,
 
 
 
                  // modem signals
 
                  rts_pad_o, cts_pad_i, dtr_pad_o, dsr_pad_i, ri_pad_i,
 
                  dcd_pad_i
 
`ifdef UART_HAS_BAUDRATE_OUTPUT
 
                  , baud_o
 
`endif
 
                  );
 
 
 
   parameter uart_data_width = `UART_DATA_WIDTH;
 
   parameter uart_addr_width = `UART_ADDR_WIDTH;
 
 
 
   input  wb_clk_i;
 
 
 
   // WISHBONE interface
 
   input  wb_rst_i;
 
   input [uart_addr_width-1:0] wb_adr_i;
 
   input [uart_data_width-1:0] wb_dat_i;
 
   output [uart_data_width-1:0] wb_dat_o;
 
   input                        wb_we_i;
 
   input                        wb_stb_i;
 
   input                        wb_cyc_i;
 
`ifndef DATA_BUS_WIDTH_8
 
   input [3:0]                   wb_sel_i;
 
`endif
 
   output                       wb_ack_o;
 
   output                       int_o;
 
 
 
   // UART      signals
 
   input                        srx_pad_i;
 
   output                       stx_pad_o;
 
   output                       rts_pad_o;
 
   input                        cts_pad_i;
 
   output                       dtr_pad_o;
 
   input                        dsr_pad_i;
 
   input                        ri_pad_i;
 
   input                        dcd_pad_i;
 
 
 
   // optional baudrate output
 
`ifdef UART_HAS_BAUDRATE_OUTPUT
 
   output                       baud_o;
 
`endif
 
 
 
 
 
   wire                         stx_pad_o;
 
   wire                         rts_pad_o;
 
   wire                         dtr_pad_o;
 
 
 
   wire [uart_addr_width-1:0]    wb_adr_i;
 
   wire [uart_data_width-1:0]    wb_dat_i;
 
   wire [uart_data_width-1:0]    wb_dat_o;
 
 
 
   wire [7:0]                    wb_dat8_i; // 8-bit internal data input
 
   wire [7:0]                    wb_dat8_o; // 8-bit internal data output
 
   wire [31:0]                   wb_dat32_o; // debug interface 32-bit output
 
   wire [3:0]                    wb_sel_i;  // WISHBONE select signal
 
   wire [uart_addr_width-1:0]    wb_adr_int;
 
   wire                         we_o;   // Write enable for registers
 
   wire                         re_o;   // Read enable for registers
 
   //
 
   // MODULE INSTANCES
 
   //
 
 
 
`ifdef DATA_BUS_WIDTH_8
 
`else
 
   // debug interface wires
 
   wire [3:0]                    ier;
 
   wire [3:0]                    iir;
 
   wire [1:0]                    fcr;
 
   wire [4:0]                    mcr;
 
   wire [7:0]                    lcr;
 
   wire [7:0]                    msr;
 
   wire [7:0]                    lsr;
 
   wire [`UART_FIFO_COUNTER_W-1:0] rf_count;
 
   wire [`UART_FIFO_COUNTER_W-1:0] tf_count;
 
   wire [2:0]                       tstate;
 
   wire [3:0]                       rstate;
 
`endif
 
 
 
`ifdef DATA_BUS_WIDTH_8
 
   ////  WISHBONE interface module
 
   uart_wb wb_interface
 
     (
 
      .clk(             wb_clk_i                ),
 
      .wb_rst_i(        wb_rst_i        ),
 
      .wb_dat_i(wb_dat_i),
 
      .wb_dat_o(wb_dat_o),
 
      .wb_dat8_i(wb_dat8_i),
 
      .wb_dat8_o(wb_dat8_o),
 
      .wb_dat32_o(32'b0),
 
      .wb_sel_i(4'b0),
 
      .wb_we_i( wb_we_i         ),
 
      .wb_stb_i(        wb_stb_i        ),
 
      .wb_cyc_i(        wb_cyc_i        ),
 
      .wb_ack_o(        wb_ack_o        ),
 
      .wb_adr_i(wb_adr_i),
 
      .wb_adr_int(wb_adr_int),
 
      .we_o(            we_o            ),
 
      .re_o(re_o)
 
      );
 
`else
 
   uart_wb wb_interface
 
     (
 
      .clk(             wb_clk_i                ),
 
      .wb_rst_i(        wb_rst_i        ),
 
      .wb_dat_i(wb_dat_i),
 
      .wb_dat_o(wb_dat_o),
 
      .wb_dat8_i(wb_dat8_i),
 
      .wb_dat8_o(wb_dat8_o),
 
      .wb_sel_i(wb_sel_i),
 
      .wb_dat32_o(wb_dat32_o),
 
      .wb_we_i( wb_we_i         ),
 
      .wb_stb_i(        wb_stb_i        ),
 
      .wb_cyc_i(        wb_cyc_i        ),
 
      .wb_ack_o(        wb_ack_o        ),
 
      .wb_adr_i(wb_adr_i),
 
      .wb_adr_int(wb_adr_int),
 
      .we_o(            we_o            ),
 
      .re_o(re_o)
 
      );
 
`endif
 
 
 
   // Registers
 
   uart_regs regs
 
     (
 
      .clk(             wb_clk_i                ),
 
      .wb_rst_i(        wb_rst_i        ),
 
      .wb_addr_i(       wb_adr_int      ),
 
      .wb_dat_i(        wb_dat8_i       ),
 
      .wb_dat_o(        wb_dat8_o       ),
 
      .wb_we_i( we_o            ),
 
      .wb_re_i(re_o),
 
      .modem_inputs(    {cts_pad_i, dsr_pad_i,
 
                         ri_pad_i,  dcd_pad_i}  ),
 
      .stx_pad_o(               stx_pad_o               ),
 
      .srx_pad_i(               srx_pad_i               ),
 
`ifdef DATA_BUS_WIDTH_8
 
`else
 
      // debug interface signals        enabled
 
      .ier(ier),
 
      .iir(iir),
 
      .fcr(fcr),
 
      .mcr(mcr),
 
      .lcr(lcr),
 
      .msr(msr),
 
      .lsr(lsr),
 
      .rf_count(rf_count),
 
      .tf_count(tf_count),
 
      .tstate(tstate),
 
      .rstate(rstate),
 
`endif
 
      .rts_pad_o(               rts_pad_o               ),
 
      .dtr_pad_o(               dtr_pad_o               ),
 
      .int_o(           int_o           )
 
`ifdef UART_HAS_BAUDRATE_OUTPUT
 
      , .baud_o(baud_o)
 
`endif
 
 
 
      );
 
 
 
`ifdef DATA_BUS_WIDTH_8
 
`else
 
   uart_debug_if dbg
 
     (
 
      // Outputs
 
      .wb_dat32_o                                (wb_dat32_o[31:0]),
 
      // Inputs
 
      .wb_adr_i                          (wb_adr_int[`UART_ADDR_WIDTH-1:0]),
 
      .ier                                               (ier[3:0]),
 
      .iir                                               (iir[3:0]),
 
      .fcr                                               (fcr[1:0]),
 
      .mcr                                               (mcr[4:0]),
 
      .lcr                                               (lcr[7:0]),
 
      .msr                                               (msr[7:0]),
 
      .lsr                                               (lsr[7:0]),
 
      .rf_count                          (rf_count[`UART_FIFO_COUNTER_W-1:0]),
 
      .tf_count                          (tf_count[`UART_FIFO_COUNTER_W-1:0]),
 
      .tstate                                    (tstate[2:0]),
 
      .rstate                                    (rstate[3:0]));
 
`endif
 
 
 
/*
 
   initial
 
     begin
 
`ifdef DATA_BUS_WIDTH_8
 
        $display("(%m) UART INFO: Data bus width is 8. No Debug interface.\n");
 
`else
 
        $display("(%m) UART INFO: Data bus width is 32. Debug Interface present.\n");
 
`endif
 
`ifdef UART_HAS_BAUDRATE_OUTPUT
 
        $display("(%m) UART INFO: Has baudrate output\n");
 
`else
 
        $display("(%m) UART INFO: Doesn't have baudrate output\n");
 
`endif
 
     end
 
*/
 
endmodule
 
 
 
 
 
 
 No newline at end of file
 No newline at end of file

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.