| Line 1... |
Line 1... |
/* sim.cfg -- Simulator configuration script file
|
/* sim.cfg -- Simulator configuration script file
|
Copyright (C) 2001-2002, Marko Mlinar, markom@opencores.org
|
|
|
|
This file is part of OpenRISC 1000 Architectural Simulator.
|
|
It contains the default configuration and help about configuring
|
|
the simulator.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
|
|
|
|
|
|
/* INTRODUCTION
|
|
|
|
The ork1sim has various parameters, that are set in configuration files
|
Copyright (C) 2001-2002, Marko Mlinar, markom@opencores.org
|
like this one. The user can switch between configurations at startup by
|
Copyright (C) 2010, Embecosm Limited
|
specifying the required configuration file with the -f option.
|
|
If no configuration file is specified or1ksim searches for the default
|
|
configuration file sim.cfg. First it searches for './sim.cfg'. If this
|
|
file is not found, it searches for '~/or1k/sim.cfg'. If this file is
|
|
not found too, it reverts to the built-in default configuration.
|
|
|
|
NOTE: Users should not rely on the built-in configuration, since the
|
Contributor Jeremy Bennett
|
default configuration may differ between version.
|
|
Rather create a configuration file that sets all critical values.
|
|
|
|
This file may contain (standard C) comments only - no // support.
|
This file is part of OpenRISC 1000 Architectural Simulator.
|
|
|
Configure files may be be included, using:
|
This program is free software; you can redistribute it and/or modify it
|
include "file_name_to_include"
|
under the terms of the GNU General Public License as published by the Free
|
|
Software Foundation; either version 3 of the License, or (at your option)
|
|
any later version.
|
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along
|
|
with this program. If not, see . */
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/* The Ork1sim has various parameters, that can be set in configuration files
|
|
like this one. The user can specify a configuration file at startu[ with
|
|
the -f option.
|
|
|
|
The user guide (see the 'doc' directory) gives full details on
|
|
configuration files. This is a reference configuration, which may be used
|
|
as a starting point for customization.
|
|
|
|
A number of peripherals are mapped at standard addresses (above 0x80000000)
|
|
in the Verilog RTL of ORPSoC standard sitribution. The same values should
|
|
be used in Or1ksim section definitions to match the behavior of the Verilog
|
|
|
|
0x90000000 UART
|
|
0x91000000 GPIO
|
|
0x92000000 Ethernet
|
|
0x93000000 Memory controller
|
|
0x94000000 PS2 keyboard
|
|
0x97000000 Frame buffer
|
|
0x97100000 VGA
|
|
0x9a000000 DMA controller
|
|
0x9e000000 ATA disc
|
|
|
|
Section ordering matches that in the user guide. All optional peripherals
|
|
and functionality is disabled. Comments only list the possible entries and
|
|
values. Consult the user guide for their meaning.
|
|
|
Like normal configuration files, the included file is divided into
|
Unless otherwise indicated, the first named option is the default. */
|
sections. Each section is described in detail also.
|
/* -------------------------------------------------------------------------- */
|
|
|
Some section have subsections. One example of such a subsection is:
|
|
|
|
device
|
/* Simulator section
|
instance specific parameters...
|
|
enddevice
|
|
|
|
which creates a device instance.
|
verbose = 0|1
|
|
debug = 0-9
|
|
profile = 0|1
|
|
prof_file = "" (default: "sim.profile")
|
|
mprofile = 0|1
|
|
mprof_file = "" (default: "sim.mprofile")
|
|
history = 0|1
|
|
exe_log = 0|1
|
|
exe_log_type = hardware|simple|software|default
|
|
exe_log_start = (default: 0)
|
|
exe_log_end = (default: never end)
|
|
exe_log_marker = (default: no markers)
|
|
exe_log_file = "" (default: "executed.log")
|
|
exe_bin_insn_log = 0|1
|
|
exe_bin_insn_log_file = "" (default: "exe-insn.bin")
|
|
clkcycle = [ps|ns|us|ms]
|
*/
|
*/
|
|
section sim
|
|
clkcycle = 100ns
|
|
end
|
|
|
|
|
/* MEMORY SECTION
|
/* VAPI section
|
|
|
This section specifies how the memory is generated and the blocks
|
|
it consists of.
|
|
|
|
type = random/unknown/pattern
|
|
Specifies the initial memory values.
|
|
'random' generates random memory using seed 'random_seed'.
|
|
'pattern' fills memory with 'pattern'.
|
|
'unknown' does not specify how memory should be generated,
|
|
leaving the memory in a undefined state. This is the fastest
|
|
option.
|
|
|
|
random_seed =
|
|
random seed for randomizer, used if type = 'random'.
|
|
|
|
pattern =
|
|
pattern to fill memory, used if type = 'pattern'.
|
|
|
|
nmemories =
|
|
number of memory instances connected
|
|
|
|
baseaddr =
|
|
memory start address
|
|
|
|
size =
|
enabled = 0|1
|
memory size
|
server_port = (default: 50000)
|
|
log_enabled = 0|1
|
|
hide_device_id = 0|1
|
|
vapi_log_file = "" (default "vapi.log")
|
|
*/
|
|
section VAPI
|
|
server_port = 50000
|
|
log_enabled = 0
|
|
vapi_log_file = "vapi.log"
|
|
end
|
|
|
name = ""
|
|
memory block name
|
|
|
|
ce =
|
/* CUC section
|
chip enable index of the memory instance
|
|
|
|
mc =
|
memory_order = none|weak|strong|exact (default: strong)
|
memory controller this memory is connected to
|
calling_convention = 0|1
|
|
enable_bursts = 0|1
|
|
no_multicycle = 0|1
|
|
timings_file = "" (default: virtex.tim)
|
|
*/
|
|
section cuc
|
|
memory_order = weak
|
|
calling_convention = 1
|
|
enable_bursts = 1
|
|
no_multicycle = 1
|
|
end
|
|
|
delayr =
|
|
cycles, required for read access, -1 if instance does not support reading
|
|
|
|
delayw =
|
/* CPU section
|
cycles, required for write access, -1 if instance does not support writing
|
|
|
|
log = ""
|
ver = (default: 0)
|
filename, where to log memory accesses to, no log, if log command is not specified
|
cfg = (default: 0)
|
|
rev = (default: 0)
|
|
upr = (see user manual for default settings)
|
|
cfgr = (default: 0x00000020)
|
|
sr = (default: 0x00008001)
|
|
superscalar = 0|1
|
|
hazards = 0|1
|
|
dependstats = 0|1
|
|
sbuf_len = (default: 0)
|
|
hardfloat = 0|1
|
*/
|
*/
|
|
section cpu
|
|
ver = 0x12
|
|
cfg = 0x00
|
|
rev = 0x0001
|
|
end
|
|
|
|
|
section memory
|
/* Memory section
|
random_seed = 12345
|
|
type = random
|
|
pattern = 0x00
|
|
|
|
name = "FLASH"
|
|
ce = 0
|
|
mc = 0
|
|
baseaddr = 0x04000000
|
|
size = 0x00200000
|
|
delayr = 1
|
|
delayw = -1
|
|
end
|
|
|
|
|
type = unknown|random|unknown|pattern
|
|
random_seed = (default: -1)
|
|
pattern = (default: 0)
|
|
baseaddr = (default: 0)
|
|
size = (default: 1024)
|
|
name = "" (default: "anonymous memory block")
|
|
ce = (default: -1)
|
|
mc = (default: 0)
|
|
delayr = (default: 1)
|
|
delayw = (default: 1)
|
|
log = "" (default: NULL)
|
|
*/
|
section memory
|
section memory
|
random_seed = 12345
|
|
type = random
|
|
pattern = 0x00
|
|
|
|
name = "RAM"
|
name = "RAM"
|
ce = 1
|
type = unknown
|
mc = 0
|
|
baseaddr = 0x00000000
|
baseaddr = 0x00000000
|
size = 0x00200000
|
size = 0x00080000
|
delayr = 1
|
delayr = 1
|
delayw = 5
|
delayw = 2
|
end
|
end
|
|
|
section memory
|
|
random_seed = 12345
|
|
type = random
|
|
pattern = 0x00
|
|
|
|
name = "ICM"
|
|
mc = 0
|
|
ce = 2
|
|
baseaddr = 0x00800000
|
|
size = 0x00004000
|
|
delayr = 1
|
|
delayw = 1
|
|
end
|
|
|
|
|
|
/* IMMU SECTION
|
|
|
|
This section configures the Instruction Memory Manangement Unit
|
|
|
|
enabled = 0/1
|
|
'0': disabled
|
|
'1': enabled
|
|
(NOTE: UPR bit is set)
|
|
|
|
nsets =
|
|
number of ITLB sets; must be power of two
|
|
|
|
nways =
|
|
number of ITLB ways
|
|
|
|
pagesize =
|
/* Data MMU section
|
instruction page size; must be power of two
|
|
|
|
entrysize =
|
enabled = 0|1
|
instruction entry size in bytes
|
nsets = (default: 1)
|
|
nways = (default: 1)
|
ustates =
|
pagesize = (default: 8192)
|
number of ITLB usage states (2, 3, 4 etc., max is 4)
|
entrysize = (default: 1)
|
|
ustates = (default: 1)
|
hitdelay =
|
hitdelay = (default: 1)
|
number of cycles immu hit costs
|
missdelay = (default: 1)
|
|
|
missdelay =
|
|
number of cycles immu miss costs
|
|
*/
|
*/
|
|
section dmmu
|
section immu
|
|
enabled = 0
|
enabled = 0
|
nsets = 32
|
nsets = 64
|
nways = 1
|
nways = 1
|
pagesize = 8192
|
pagesize = 8192
|
|
hitdelay = 0
|
|
missdelay = 0
|
end
|
end
|
|
|
|
|
/* DMMU SECTION
|
/* Instruction MMU section
|
|
|
This section configures the Data Memory Manangement Unit
|
|
|
|
enabled = 0/1
|
|
'0': disabled
|
|
'1': enabled
|
|
(NOTE: UPR bit is set)
|
|
|
|
nsets =
|
|
number of DTLB sets; must be power of two
|
|
|
|
nways =
|
|
number of DTLB ways
|
|
|
|
pagesize =
|
|
data page size; must be power of two
|
|
|
|
entrysize =
|
|
data entry size in bytes
|
|
|
|
ustates =
|
enabled = 0|1
|
number of DTLB usage states (2, 3, 4 etc., max is 4)
|
nsets = (default: 1)
|
|
nways = (default: 1)
|
hitdelay =
|
pagesize = (default: 8192)
|
number of cycles dmmu hit costs
|
entrysize = (default: 1)
|
|
ustates = (default: 1)
|
missdelay =
|
hitdelay = (default: 1)
|
number of cycles dmmu miss costs
|
missdelay = (default: 1)
|
*/
|
*/
|
|
section immu
|
section dmmu
|
|
enabled = 0
|
enabled = 0
|
nsets = 32
|
nsets = 64
|
nways = 1
|
nways = 1
|
pagesize = 8192
|
pagesize = 8192
|
|
hitdelay = 0
|
|
missdelay = 0
|
end
|
end
|
|
|
|
|
/* IC SECTION
|
/* Data cache section
|
|
|
This section configures the Instruction Cache
|
|
|
|
enabled = 0/1
|
enabled = 0|1
|
'0': disabled
|
nsets = (default: 1)
|
'1': enabled
|
nways = (default: 1)
|
(NOTE: UPR bit is set)
|
blocksize = (default: 16)
|
|
ustates = (default: 2)
|
nsets =
|
load_hitdelay = (default: 2)
|
number of IC sets; must be power of two
|
load_missdelay = (default: 2)
|
|
store_hitdelay = (default: 0)
|
nways =
|
store_missdelay = (default: 0)
|
number of IC ways
|
|
|
|
blocksize =
|
|
IC block size in bytes; must be power of two
|
|
|
|
ustates =
|
|
number of IC usage states (2, 3, 4 etc., max is 4)
|
|
|
|
hitdelay =
|
|
number of cycles ic hit costs
|
|
|
|
missdelay =
|
|
number of cycles ic miss costs
|
|
*/
|
*/
|
|
|
section ic
|
section dc
|
enabled = 0
|
enabled = 0
|
nsets = 512
|
nsets = 256
|
nways = 1
|
nways = 1
|
blocksize = 16
|
blocksize = 16
|
|
load_hitdelay = 0
|
|
load_missdelay = 0
|
|
store_hitdelay = 0
|
|
store_missdelay = 0
|
end
|
end
|
|
|
|
|
/* DC SECTION
|
/* Instruction cache section
|
|
|
This section configures the Data Cache
|
enabled = 0|1
|
|
nsets = (default: 1)
|
enabled = 0/1
|
nways = (default: 1)
|
'0': disabled
|
blocksize = (default: 16)
|
'1': enabled
|
ustates = (default: 2)
|
(NOTE: UPR bit is set)
|
hitdelay = (default: 1)
|
|
missdelay = (default: 1)
|
nsets =
|
|
number of DC sets; must be power of two
|
|
|
|
nways =
|
|
number of DC ways
|
|
|
|
blocksize =
|
|
DC block size in bytes; must be power of two
|
|
|
|
ustates =
|
|
number of DC usage states (2, 3, 4 etc., max is 4)
|
|
|
|
load_hitdelay =
|
|
number of cycles dc load hit costs
|
|
|
|
load_missdelay =
|
|
number of cycles dc load miss costs
|
|
|
|
store_hitdelay =
|
|
number of cycles dc load hit costs
|
|
|
|
store_missdelay =
|
|
number of cycles dc load miss costs
|
|
*/
|
*/
|
|
section ic
|
section dc
|
|
enabled = 0
|
enabled = 0
|
nsets = 512
|
nsets = 256
|
nways = 1
|
nways = 1
|
blocksize = 16
|
blocksize = 16
|
|
hitdelay = 0
|
|
missdelay = 0
|
end
|
end
|
|
|
|
|
/* SIM SECTION
|
/* Programmable interrupt controller section
|
|
|
This section specifies how or1ksim should behave.
|
|
|
|
verbose = 0/1
|
|
'0': don't print extra messages
|
|
'1': print extra messages
|
|
|
|
debug = 0-9
|
|
0 : no debug messages
|
|
1-9: debug message level.
|
|
higher numbers produce more messages
|
|
|
|
profile = 0/1
|
|
'0': don't generate profiling file 'sim.profile'
|
|
'1': don't generate profiling file 'sim.profile'
|
|
|
|
prof_fn = ""
|
|
optional filename for the profiling file.
|
|
valid only if 'profile' is set
|
|
|
|
mprofile = 0/1
|
|
'0': don't generate memory profiling file 'sim.mprofile'
|
|
'1': generate memory profiling file 'sim.mprofile'
|
|
|
|
mprof_fn = ""
|
|
optional filename for the memory profiling file.
|
|
valid only if 'mprofile' is set
|
|
|
|
history = 0/1
|
|
'0': don't track execution flow
|
|
'1': track execution flow
|
|
Execution flow can be tracked for the simulator's
|
|
'hist' command. Useful for back-trace debugging.
|
|
|
|
iprompt = 0/1
|
|
'0': start in (so what do we start in ???)
|
|
'1': start in interactive prompt.
|
|
|
|
exe_log = 0/1
|
|
'0': don't generate execution log.
|
|
'1': generate execution log.
|
|
|
|
exe_log = default/hardware/simple/software
|
|
type of execution log, default is used when not specified
|
|
|
|
exe_log_start =
|
|
index of first instruction to start logging, default = 0
|
|
|
|
exe_log_end =
|
|
index of last instruction to end logging; not limited, if omitted
|
|
|
|
exe_log_marker =
|
|
specifies number of instructions before horizontal marker is
|
|
printed; if zero, markers are disabled (default)
|
|
|
|
exe_log_fn = ""
|
|
filename for the exection log file.
|
|
valid only if 'exe_log' is set
|
|
|
|
clkcycle = [ps|ns|us|ms]
|
|
specifies time measurement for one cycle
|
|
*/
|
|
|
|
section sim
|
|
verbose = 1
|
|
debug = 0
|
|
profile = 0
|
|
prof_fn = "sim.profile"
|
|
|
|
history = 1
|
|
/* iprompt = 0 */
|
|
exe_log = 0
|
|
exe_log_type = simple
|
|
/* exe_log_start = 0 */
|
|
/* exe_log_end = 2000000 */
|
|
/* exe_log_marker = 50 */
|
|
exe_log_fn = "executed.log"
|
|
|
|
/* clkcycle = 10000ns */
|
|
|
|
end
|
|
|
|
|
|
/* SECTION VAPI
|
|
|
|
This section configures the Verification API, used for Advanced
|
|
Core Verification.
|
|
|
|
enabled = 0/1
|
|
'0': disbable VAPI server
|
|
'1': enable/start VAPI server
|
|
|
|
server_port =
|
|
TCP/IP port to start VAPI server on
|
|
|
|
log_enabled = 0/1
|
|
'0': disable VAPI requests logging
|
|
'1': enable VAPI requests logging
|
|
|
|
hide_device_id = 0/1
|
|
'0': don't log device id (for compatability with old version)
|
|
'1': log device id
|
|
|
|
|
|
vapi_fn =
|
|
filename for the log file.
|
|
valid only if log_enabled is set
|
|
*/
|
|
|
|
section VAPI
|
|
enabled = 0
|
|
server_port = 9998
|
|
log_enabled = 0
|
|
vapi_log_fn = "vapi.log"
|
|
end
|
|
|
|
|
|
/* CPU SECTION
|
|
|
|
This section specifies various CPU parameters.
|
|
|
|
ver =
|
|
rev =
|
|
specifies version and revision of the CPU used
|
|
|
|
upr =
|
|
changes the upr register
|
|
|
|
sr =
|
|
sets the initial Supervision Register value
|
|
|
|
superscalar = 0/1
|
enabled = 0|1
|
'0': CPU is scalar
|
edge_trigger = 0|1 (default: 1)
|
'1': CPU is superscalar
|
|
(modify cpu/or32/execute.c to tune superscalar model)
|
|
|
|
hazards = 0/1
|
|
'0': don't track data hazards in superscalar CPU
|
|
'1': track data hazards in superscalar CPU
|
|
If tracked, data hazards can be displayed using the
|
|
simulator's 'r' command.
|
|
|
|
dependstats = 0/1
|
|
'0': don't calculate inter-instruction dependencies.
|
|
'1': calculate inter-instruction dependencies.
|
|
If calculated, inter-instruction dependencies can be
|
|
displayed using the simulator's 'stat' command.
|
|
|
|
sbuf_len =
|
|
length of store buffer (<= 256), 0 = disabled
|
|
*/
|
*/
|
|
|
section cpu
|
section pic
|
ver = 0x1200
|
enabled = 1
|
rev = 0x0001
|
|
/* upr = */
|
|
superscalar = 0
|
|
hazards = 1
|
|
dependstats = 1
|
|
sbuf_len = 1
|
|
end
|
end
|
|
|
|
|
/* PM SECTION
|
/* Power management section
|
|
|
This section specifies Power Management parameters
|
enabled = 0|1
|
|
|
enabled = 0/1
|
|
'0': disable power management
|
|
'1': enable power management
|
|
*/
|
*/
|
|
|
section pm
|
section pm
|
enabled = 0
|
enabled = 0
|
end
|
end
|
|
|
|
|
/* BPB SECTION
|
/* Branch prediction section
|
|
|
This section specifies how branch prediction should behave.
|
|
|
|
enabled = 0/1
|
|
'0': disable branch prediction
|
|
'1': enable branch prediction
|
|
|
|
btic = 0/1
|
|
'0': disable branch target instruction cache model
|
|
'1': enable branch target instruction cache model
|
|
|
|
sbp_bf_fwd = 0/1
|
|
Static branch prediction for 'l.bf'
|
|
'0': don't use forward prediction
|
|
'1': use forward prediction
|
|
|
|
sbp_bnf_fwd = 0/1
|
|
Static branch prediction for 'l.bnf'
|
|
'0': don't use forward prediction
|
|
'1': use forward prediction
|
|
|
|
hitdelay =
|
|
number of cycles bpb hit costs
|
|
|
|
missdelay =
|
enabled = 0|1
|
number of cycles bpb miss costs
|
btic = 0|1
|
|
sbp_bf_fwd = 0|1
|
|
sbp_bnf_fwd = 0|1
|
|
hitdelay = (default: 0)
|
|
missdelay = (default: 0)
|
*/
|
*/
|
|
|
section bpb
|
section bpb
|
enabled = 1
|
enabled = 0
|
btic = 1
|
|
sbp_bf_fwd = 0
|
|
sbp_bnf_fwd = 0
|
|
hitdelay = 0
|
|
missdelay = 0
|
|
end
|
end
|
|
|
|
|
/* DEBUG SECTION
|
/* Debug unit section
|
|
|
This sections specifies how the debug unit should behave.
|
|
|
|
enabled = 0/1
|
|
'0': disable debug unit
|
|
'1': enable debug unit
|
|
|
|
gdb_enabled = 0/1
|
|
'0': don't start gdb server
|
|
'1': start gdb server at port 'server_port'
|
|
|
|
server_port =
|
enabled = 0|1
|
TCP/IP port to start gdb server on
|
rsp_enabled = 0|1
|
valid only if gdb_enabled is set
|
rsp_port = (default: 51000)
|
|
vapi_id = (default: 0)
|
vapi_id =
|
|
Used to create "fake" vapi log file containing the JTAG proxy messages.
|
|
*/
|
*/
|
section debug
|
section debug
|
enabled = 1
|
enabled = 1
|
gdb_enabled = 1
|
rsp_enabled = 1
|
server_port = 9999
|
rsp_port = 9999
|
end
|
end
|
|
|
/* MC SECTION
|
|
|
|
This section configures the memory controller
|
|
|
|
enabled = 0/1
|
|
'0': disable memory controller
|
|
'1': enable memory controller
|
|
|
|
baseaddr =
|
|
address of first MC register
|
|
|
|
POC =
|
/* Memory controller section
|
Power On Configuration register
|
|
|
|
index =
|
enabled = 0|1
|
Index of this memory controller amongst all the memory controllers
|
baseaddr = (default: 0)
|
|
POC = (default: 0)
|
|
index = (default: 0)
|
*/
|
*/
|
|
|
section mc
|
section mc
|
enabled = 0
|
enabled = 0
|
baseaddr = 0x60000000
|
baseaddr = 0x93000000
|
POC = 0x00000008 /* Power on configuration register */
|
POC = 0x0000000a /* 32 bit SSRAM */
|
index = 0
|
index = 0
|
end
|
end
|
|
|
|
|
/* UART SECTION
|
/* UART section
|
|
|
This section configures the UARTs
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr =
|
|
address of first UART register for this device
|
|
|
|
|
|
channel = :
|
|
|
|
The channel parameter indicates the source of received UART characters
|
|
and the sink for transmitted UART characters.
|
|
|
|
The can be either "file", "xterm", "tcp", "fd", or "tty"
|
|
(without quotes).
|
|
|
|
A) To send/receive characters from a pair of files, use a file
|
|
channel:
|
|
|
|
channel=file:,
|
|
|
|
B) To create an interactive terminal window, use an xterm channel:
|
|
|
|
channel=xterm:[]*
|
|
|
|
C) To create a bidirectional tcp socket which one could, for example,
|
enabled = 0|1
|
access via telnet, use a tcp channel:
|
baseaddr = (default: 0)
|
|
channel = "value>" (default: "xterm:")
|
channel=tcp:
|
irq = (default: 0)
|
|
16550 = 0|1
|
D) To cause the UART to read/write from existing numeric file
|
jitter = (default: 0)
|
descriptors, use an fd channel:
|
vapi_id = (default: 0)
|
|
|
channel=fd:,
|
|
|
|
E) To connect the UART to a physical serial port, create a tty
|
|
channel:
|
|
|
|
channel=tty:device=/dev/ttyS0,baud=9600
|
|
|
|
irq =
|
|
irq number for this device
|
|
|
|
16550 = 0/1
|
|
'0': this device is a UART16450
|
|
'1': this device is a UART16550
|
|
|
|
jitter =
|
|
in msecs... time to block, -1 to disable it
|
|
|
|
vapi_id =
|
|
VAPI id of this instance
|
|
*/
|
*/
|
|
|
section uart
|
section uart
|
enabled = 1
|
enabled = 1
|
baseaddr = 0x90000000
|
baseaddr = 0x90000000
|
irq = 2
|
irq = 2
|
/*channel = "file:uart0.rx,uart0.tx"*/
|
|
/*channel = "tcp:10084" */
|
|
channel = "xterm:"
|
|
/*channel = "tcp:10000"*/
|
|
jitter = -1 /* async behaviour */
|
|
16550 = 1
|
16550 = 1
|
end
|
end
|
|
|
|
|
/* DMA SECTION
|
/* DMA section
|
|
|
This section configures the DMAs
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr =
|
enabled = 0|1
|
address of first DMA register for this device
|
baseaddr = (default: 0)
|
|
irq = (default: 0)
|
irq =
|
vapi_id = (default: 0)
|
irq number for this device
|
|
|
|
vapi_id =
|
|
VAPI id of this instance
|
|
*/
|
*/
|
|
|
section dma
|
section dma
|
enabled = 0
|
enabled = 0
|
baseaddr = 0x9a000000
|
baseaddr = 0x9a000000
|
irq = 11
|
irq = 11
|
end
|
end
|
|
|
|
|
/* ETHERNET SECTION
|
/* Ethernet section
|
|
|
This section configures the ETHERNETs
|
enabled = 0|1
|
|
baseaddr = (default: 0)
|
enabled = <0|1>
|
dma = (default: 0)
|
Enable/disable the peripheral. By default if it is enabled.
|
irq = (default: 0)
|
|
rtx_type = 0|1
|
baseaddr =
|
rx_channel = (default: 0)
|
address of first ethernet register for this device
|
tx_channel = (default: 0)
|
|
rxfile = "" (default: "eth_rx")
|
dma =
|
txfile = "" (default: "eth_rx")
|
which controller is this ethernet "connected" to
|
sockif = "" (default: "or1ksim_eth")
|
|
vapi_id = (default: 0)
|
irq =
|
|
ethernet mac IRQ level
|
|
|
|
rtx_type =
|
|
use 0 - file interface, 1 - socket interface
|
|
|
|
rx_channel =
|
|
DMA channel used for RX
|
|
|
|
tx_channel =
|
|
DMA channel used for TX
|
|
|
|
rxfile = ""
|
|
filename, where to read data from
|
|
|
|
txfile = ""
|
|
filename, where to write data to
|
|
|
|
sockif = ""
|
|
interface name of ethernet socket
|
|
|
|
vapi_id =
|
|
VAPI id of this instance
|
|
*/
|
*/
|
|
|
section ethernet
|
section ethernet
|
enabled = 0
|
enabled = 0
|
baseaddr = 0x92000000
|
baseaddr = 0x92000000
|
dma = 0
|
|
irq = 4
|
irq = 4
|
rtx_type = 0
|
rtx_type = 0
|
tx_channel = 0
|
|
rx_channel = 1
|
|
rxfile = "eth0.rx"
|
|
txfile = "eth0.tx"
|
|
sockif = "eth0"
|
|
end
|
end
|
|
|
|
|
/* GPIO SECTION
|
/* GPIO section
|
|
|
This section configures the GPIOs
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr =
|
|
address of first GPIO register for this device
|
|
|
|
irq =
|
enabled = 0|1
|
irq number for this device
|
baseaddr = (default: 0)
|
|
irq = (default: 0)
|
base_vapi_id =
|
base_vapi_id = (default: 0)
|
first VAPI id of this instance
|
|
GPIO uses 8 consecutive VAPI IDs
|
|
*/
|
*/
|
|
|
section gpio
|
section gpio
|
enabled = 1
|
enabled = 1
|
baseaddr = 0x91000000
|
baseaddr = 0x91000000
|
irq = 3
|
irq = 3
|
base_vapi_id = 0x0200
|
base_vapi_id = 0x0200
|
end
|
end
|
|
|
/* VGA SECTION
|
/* VGA section
|
|
|
This section configures the VGA/LCD controller
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr =
|
|
address of first VGA register
|
|
|
|
irq =
|
|
irq number for this device
|
|
|
|
refresh_rate =
|
|
number of cycles between screen dumps
|
|
|
|
filename = ""
|
enabled = 0|1
|
template name for generated names (e.g. "primary" produces "primary0023.bmp")
|
baseaddr = (default: 0)
|
|
irq = (default: 0)
|
|
refresh_rate = (default: cycles equivalent to 50Hz)
|
|
filename = "" (default: "vga_out))
|
*/
|
*/
|
|
|
section vga
|
section vga
|
enabled = 0
|
enabled = 0
|
baseaddr = 0x97100000
|
baseaddr = 0x97100000
|
irq = 8
|
irq = 8
|
refresh_rate = 100000
|
|
filename = "primary"
|
|
end
|
end
|
|
|
|
|
/* TICK TIMER SECTION
|
/* Frame buffer section
|
|
|
This section configures tick timer
|
|
|
|
enabled = 0/1
|
enabled = 0|1
|
whether tick timer is enabled
|
baseaddr = (default: 0)
|
*/
|
refresh_rate = (default: cycles equivalent to 50Hz)
|
section tick
|
filename = "" (default: "fb_out))
|
enabled = 1
|
|
irq = 3
|
|
end
|
|
|
|
section pic
|
|
enabled = 1
|
|
edge_trigger = 1
|
|
end
|
|
|
|
/* FB SECTION
|
|
|
|
This section configures the frame buffer
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr =
|
|
base address of frame buffer
|
|
|
|
paladdr =
|
|
base address of first palette entry
|
|
|
|
refresh_rate =
|
|
number of cycles between screen dumps
|
|
|
|
filename = ""
|
|
template name for generated names (e.g. "primary" produces "primary0023.bmp")
|
|
*/
|
*/
|
section fb
|
section fb
|
enabled = 0
|
enabled = 0
|
baseaddr = 0x97000000
|
baseaddr = 0x97000000
|
refresh_rate = 1000000
|
|
filename = "primary"
|
|
end
|
end
|
|
|
/* KBD SECTION
|
|
|
|
This section configures the PS/2 compatible keyboard
|
/* PS2 keyboard section
|
|
|
baseaddr =
|
This section configures the PS/2 compatible keyboard
|
base address of the keyboard device
|
|
|
|
rxfile = ""
|
enabled = 0|1
|
filename, where to read data from
|
baseaddr = (default: 0)
|
|
irq = (default: 0)
|
|
rxfile = "" (default: "kbd_in")
|
*/
|
*/
|
section kbd
|
section kbd
|
enabled = 0
|
enabled = 0
|
irq = 5
|
|
baseaddr = 0x94000000
|
baseaddr = 0x94000000
|
rxfile = "kbd.rx"
|
irq = 5
|
end
|
end
|
|
|
/* ATA SECTION
|
|
|
|
This section configures the ATA/ATAPI host controller
|
/* ATA disc section
|
|
|
baseaddr =
|
enabled = 0|1
|
address of first ATA register
|
baseaddr = (default: 0)
|
|
irq = (default: 0)
|
enabled = <0|1>
|
dev_id = 1|2|3
|
Enable/disable the peripheral. By default if it is enabled.
|
rev = 0-15 (default: 1)
|
|
pio_mode0_t1 = 0-255 (default: 6)
|
irq =
|
pio_mode0_t2 = 0-255 (default: 28)
|
irq number for this device
|
pio_mode0_t4 = 0-255 (default: 2)
|
|
pio_mode0_teoc = 0-255 (default: 23)
|
debug =
|
dma_mode0_tm = 0-255 (default: 4)
|
debug level for ata models.
|
dma_mode0_td = 0-255 (default: 21)
|
0: no debug messages
|
dma_mode0_teoc = 0-255 (default: 21)
|
1: verbose messages
|
device = 0|1
|
3: normal messages (more messages than verbose)
|
|
5: debug messages (normal debug messages)
|
Device specific:
|
7: flow control messages (debug statemachine flows)
|
|
9: low priority message (display everything the code does)
|
type = 0|1|2
|
|
file = "" (default: "ata_file")
|
dev_type0/1 =
|
size = (default: 0)
|
ata device 0 type
|
packet = 0|1
|
0: NO_CONNeCT: none (not connected)
|
firmware = "" (default: "02207031")
|
1: FILE : simulated harddisk
|
heads = (default: 7)
|
2: LOCAL : local system harddisk
|
sectors = (default: 32)
|
|
mwdma = 2|1|0|-1
|
dev_file0/1 = ""
|
pio = 4|3|2|1|0
|
filename for simulated ATA device
|
|
valid only if dev_type0 == 1
|
|
|
|
dev_size0/1 =
|
|
size of simulated hard-disk (in MBytes)
|
|
valid only if dev_type0 == 1
|
|
|
|
dev_packet0/1 =
|
|
0: simulated ATA device does NOT implement PACKET command feature set
|
|
1: simulated ATA device does implement PACKET command feature set
|
|
|
|
FIXME: irq number
|
|
*/
|
*/
|
section ata
|
section ata
|
enabled = 0
|
enabled = 0
|
baseaddr = 0x9e000000
|
baseaddr = 0x9e000000
|
irq = 15
|
irq = 15
|
|
|
dev_type0 = 1
|
device 0
|
dev_file0 = "/tmp/sim_atadev0"
|
type = 1
|
dev_size0 = 1
|
size = 1
|
dev_packet0 = 0
|
enddevice
|
|
|
dev_type1 = 0
|
|
dev_file1 = ""
|
|
dev_size1 = 0
|
|
dev_packet1 = 0
|
|
end
|
end
|
|
|
|
|
|
/* Generic peripheral section
|
|
|
|
enabled = 0|1
|
|
baseaddr = (default: 0)
|
|
size = (default: 0)
|
|
name = "" (default: "anonymous external peripheral")
|
|
byte_enabled = 1|0
|
|
hw_enabled = 1|0
|
|
word_enabled = 1|0
|
|
*/
|
|
section generic
|
|
enabled = 0
|
|
end
|
