OpenCores
URL https://opencores.org/ocsvn/rio/rio/trunk

Subversion Repositories rio

[/] [rio/] [trunk/] [bench/] [vhdl/] [TestRioSwitch.vhd] - Diff between revs 2 and 28

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 2 Rev 28
Line 86... Line 86... 
      writeContent_o : out Array1(SWITCH_PORTS-1 downto 0);
 
      writeContent_o : out Array1(SWITCH_PORTS-1 downto 0);
 
      writeContentData_o : out Array32(SWITCH_PORTS-1 downto 0);
 
      writeContentData_o : out Array32(SWITCH_PORTS-1 downto 0);
 
 
 
 
 
      readFrameEmpty_i : in Array1(SWITCH_PORTS-1 downto 0);
 
      readFrameEmpty_i : in Array1(SWITCH_PORTS-1 downto 0);
 
      readFrame_o : out Array1(SWITCH_PORTS-1 downto 0);
 
      readFrame_o : out Array1(SWITCH_PORTS-1 downto 0);
 
      readFrameRestart_o : out Array1(SWITCH_PORTS-1 downto 0);
 
 
 
      readFrameAborted_i : in Array1(SWITCH_PORTS-1 downto 0);
 
 
 
      readContentEmpty_i : in Array1(SWITCH_PORTS-1 downto 0);
 
 
 
      readContent_o : out Array1(SWITCH_PORTS-1 downto 0);
 
      readContent_o : out Array1(SWITCH_PORTS-1 downto 0);
 
      readContentEnd_i : in Array1(SWITCH_PORTS-1 downto 0);
 
      readContentEnd_i : in Array1(SWITCH_PORTS-1 downto 0);
 
      readContentData_i : in Array32(SWITCH_PORTS-1 downto 0);
 
      readContentData_i : in Array32(SWITCH_PORTS-1 downto 0);
 
 
 
 
 
      portLinkTimeout_o : out std_logic_vector(23 downto 0);
 
      portLinkTimeout_o : out std_logic_vector(23 downto 0);
Line 130... Line 127... 
      frameRead_i : in RioFrame;
 
      frameRead_i : in RioFrame;
 
      frameReceived_o : out std_logic;
 
      frameReceived_o : out std_logic;
 
 
 
 
 
      readFrameEmpty_o : out std_logic;
 
      readFrameEmpty_o : out std_logic;
 
      readFrame_i : in std_logic;
 
      readFrame_i : in std_logic;
 
      readFrameRestart_i : in std_logic;
 
 
 
      readFrameAborted_o : out std_logic;
 
 
 
      readContentEmpty_o : out std_logic;
 
 
 
      readContent_i : in std_logic;
 
      readContent_i : in std_logic;
 
      readContentEnd_o : out std_logic;
 
      readContentEnd_o : out std_logic;
 
      readContentData_o : out std_logic_vector(31 downto 0);
 
      readContentData_o : out std_logic_vector(31 downto 0);
 
      writeFrameFull_o : out std_logic;
 
      writeFrameFull_o : out std_logic;
 
      writeFrame_i : in std_logic;
 
      writeFrame_i : in std_logic;
Line 170... Line 164... 
  signal writeContent : Array1(PORTS-1 downto 0);
 
  signal writeContent : Array1(PORTS-1 downto 0);
 
  signal writeContentData : Array32(PORTS-1 downto 0);
 
  signal writeContentData : Array32(PORTS-1 downto 0);
 
 
 
 
 
  signal readFrameEmpty : Array1(PORTS-1 downto 0);
 
  signal readFrameEmpty : Array1(PORTS-1 downto 0);
 
  signal readFrame : Array1(PORTS-1 downto 0);
 
  signal readFrame : Array1(PORTS-1 downto 0);
 
  signal readFrameRestart : Array1(PORTS-1 downto 0);
 
 
 
  signal readFrameAborted : Array1(PORTS-1 downto 0);
 
 
 
  signal readContentEmpty : Array1(PORTS-1 downto 0);
 
 
 
  signal readContent : Array1(PORTS-1 downto 0);
 
  signal readContent : Array1(PORTS-1 downto 0);
 
  signal readContentEnd : Array1(PORTS-1 downto 0);
 
  signal readContentEnd : Array1(PORTS-1 downto 0);
 
  signal readContentData : Array32(PORTS-1 downto 0);
 
  signal readContentData : Array32(PORTS-1 downto 0);
 
 
 
 
 
  signal portLinkTimeout : std_logic_vector(23 downto 0);
 
  signal portLinkTimeout : std_logic_vector(23 downto 0);
Line 218... Line 209... 
  -- Serial port emulator.
 
  -- Serial port emulator.
 
  -----------------------------------------------------------------------------
 
  -----------------------------------------------------------------------------
 
  TestDriver: process
 
  TestDriver: process
 
 
 
 
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    -- 
    -- Place a new ingress frame on a port.
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    procedure SendFrame(constant portIndex : natural range 0 to 7;
 
    procedure SendFrame(constant portIndex : natural range 0 to 7;
 
                        constant frame : RioFrame) is
 
                        constant frame : RioFrame) is
 
    begin
 
    begin
 
      frameValid(portIndex) <= '1';
 
      frameValid(portIndex) <= '1';
 
      frameWrite(portIndex) <= frame;
 
      frameWrite(portIndex) <= frame;
 
      wait until frameComplete(portIndex) = '1';
 
      wait until frameComplete(portIndex) = '1';
 
      frameValid(portIndex) <= '0';
 
      frameValid(portIndex) <= '0';
 
    end procedure;
 
    end procedure;
 
 
 
 
 
 
 
    procedure SendFrame(constant portIndex : natural range 0 to 7;
 
 
 
                        constant sourceId : std_logic_vector(15 downto 0);
 
 
 
                        constant destinationId : std_logic_vector(15 downto 0);
 
 
 
                        constant payload : RioPayload) is
 
 
 
      variable frame : RioFrame;
 
 
 
    begin
 
 
 
      frame := RioFrameCreate(ackId=>"00000", vc=>'0', crf=>'0', prio=>"00",
 
 
 
                              tt=>"01", ftype=>"0000",
 
 
 
                              sourceId=>sourceId, destId=>destinationId,
 
 
 
                              payload=>payload);
 
 
 
 
 
 
 
      frameValid(portIndex) <= '1';
 
 
 
      frameWrite(portIndex) <= frame;
 
 
 
    end procedure;
 
 
 
 
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    -- 
    -- Expect a new egress frame on a port.
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    procedure ReceiveFrame(constant portIndex : natural range 0 to 7;
 
    procedure ReceiveFrame(constant portIndex : natural range 0 to 7;
 
                           constant frame : RioFrame) is
 
                           constant frame : RioFrame) is
 
    begin
 
    begin
 
      frameExpected(portIndex) <= '1';
 
      frameExpected(portIndex) <= '1';
 
      frameRead(portIndex) <= frame;
 
      frameRead(portIndex) <= frame;
 
      wait until frameReceived(portIndex) = '1';
 
      wait until frameReceived(portIndex) = '1';
 
      frameExpected(portIndex) <= '0';
 
      frameExpected(portIndex) <= '0';
 
    end procedure;
 
    end procedure;
 
 
 
 
 
 
 
    procedure ReceiveFrame(constant portIndex : natural range 0 to 7;
 
 
 
                           constant sourceId : std_logic_vector(15 downto 0);
 
 
 
                           constant destinationId : std_logic_vector(15 downto 0);
 
 
 
                           constant payload : RioPayload) is
 
 
 
      variable frame : RioFrame;
 
 
 
    begin
 
 
 
      frame := RioFrameCreate(ackId=>"00000", vc=>'0', crf=>'0', prio=>"00",
 
 
 
                              tt=>"01", ftype=>"0000",
 
 
 
                              sourceId=>sourceId, destId=>destinationId,
 
 
 
                              payload=>payload);
 
 
 
 
 
 
 
      frameExpected(portIndex) <= '1';
 
 
 
      frameRead(portIndex) <= frame;
 
 
 
    end procedure;
 
 
 
 
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    -- 
    -- Read a configuration-space register.
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    procedure ReadConfig32(constant portIndex : natural range 0 to 7;
 
    procedure ReadConfig32(constant portIndex : natural range 0 to 7;
 
                           constant destinationId : std_logic_vector(15 downto 0);
 
                           constant destinationId : std_logic_vector(15 downto 0);
 
                           constant sourceId : std_logic_vector(15 downto 0);
 
                           constant sourceId : std_logic_vector(15 downto 0);
 
                           constant hop : std_logic_vector(7 downto 0);
 
                           constant hop : std_logic_vector(7 downto 0);
Line 284... Line 305... 
                                                                     dataLength=>1,
 
                                                                     dataLength=>1,
 
                                                                     data=>maintData)));
 
                                                                     data=>maintData)));
 
    end procedure;
 
    end procedure;
 
 
 
 
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    -- 
    -- Write a configuration-space register.
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    procedure WriteConfig32(constant portIndex : natural range 0 to 7;
 
    procedure WriteConfig32(constant portIndex : natural range 0 to 7;
 
                            constant destinationId : std_logic_vector(15 downto 0);
 
                            constant destinationId : std_logic_vector(15 downto 0);
 
                            constant sourceId : std_logic_vector(15 downto 0);
 
                            constant sourceId : std_logic_vector(15 downto 0);
 
                            constant hop : std_logic_vector(7 downto 0);
 
                            constant hop : std_logic_vector(7 downto 0);
Line 327... Line 348... 
                                                                     dataLength=>0,
 
                                                                     dataLength=>0,
 
                                                                     data=>maintData)));
 
                                                                     data=>maintData)));
 
    end procedure;
 
    end procedure;
 
 
 
 
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    -- 
    -- Set a route table entry.
 
 
 
    ---------------------------------------------------------------------------
 
 
 
    procedure RouteSet(constant deviceId : std_logic_vector(15 downto 0);
 
 
 
                       constant portIndex : std_logic_vector(7 downto 0)) is
 
 
 
      variable frame : RioFrame;
 
 
 
    begin
 
 
 
      WriteConfig32(portIndex=>0, destinationId=>x"ffff", sourceId=>x"ffff", hop=>x"00",
 
 
 
                    tid=>x"de", address=>x"000070", data=>(x"0000" & deviceId));
 
 
 
      WriteConfig32(portIndex=>0, destinationId=>x"ffff", sourceId=>x"ffff", hop=>x"00",
 
 
 
                    tid=>x"ad", address=>x"000074", data=>(x"000000" & portIndex));
 
 
 
    end procedure;
 
 
 
 
 
 
 
    ---------------------------------------------------------------------------
 
 
 
    -- Set the default route table entry.
 
 
 
    ---------------------------------------------------------------------------
 
 
 
    procedure RouteSetDefault(constant portIndex : std_logic_vector(7 downto 0)) is
 
 
 
      variable frame : RioFrame;
 
 
 
    begin
 
 
 
      WriteConfig32(portIndex=>0, destinationId=>x"ffff", sourceId=>x"ffff", hop=>x"00",
 
 
 
                    tid=>x"ad", address=>x"000078", data=>(x"000000" & portIndex));
 
 
 
    end procedure;
 
 
 
 
 
 
 
    ---------------------------------------------------------------------------
 
 
 
    -- Send a frame on an ingress port and expect it at an egress port.
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    procedure RouteFrame(constant sourcePortIndex : natural range 0 to 7;
 
    procedure RouteFrame(constant sourcePortIndex : natural range 0 to 7;
 
                         constant destinationPortIndex : natural range 0 to 7;
 
                         constant destinationPortIndex : natural range 0 to 7;
 
                         constant sourceId : std_logic_vector(15 downto 0);
 
                         constant sourceId : std_logic_vector(15 downto 0);
 
                         constant destinationId : std_logic_vector(15 downto 0);
 
                         constant destinationId : std_logic_vector(15 downto 0);
Line 355... Line 399... 
      frameExpected(destinationPortIndex) <= '0';
 
      frameExpected(destinationPortIndex) <= '0';
 
 
 
 
 
    end procedure;
 
    end procedure;
 
 
 
 
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    -- 
    -- Variable definitions.
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    procedure SendFrame(constant portIndex : natural range 0 to 7;
 
 
 
                        constant sourceId : std_logic_vector(15 downto 0);
 
 
 
                        constant destinationId : std_logic_vector(15 downto 0);
 
 
 
                        constant payload : RioPayload) is
 
 
 
      variable frame : RioFrame;
 
 
 
    begin
 
 
 
      frame := RioFrameCreate(ackId=>"00000", vc=>'0', crf=>'0', prio=>"00",
 
 
 
                              tt=>"01", ftype=>"0000",
 
 
 
                              sourceId=>sourceId, destId=>destinationId,
 
 
 
                              payload=>payload);
 
 
 
 
 
 
 
      frameValid(portIndex) <= '1';
 
 
 
      frameWrite(portIndex) <= frame;
 
 
 
    end procedure;
 
 
 
 
 
 
 
    ---------------------------------------------------------------------------
 
 
 
    -- 
 
 
    ---------------------------------------------------------------------------
 
 
 
    procedure ReceiveFrame(constant portIndex : natural range 0 to 7;
 
 
 
                           constant sourceId : std_logic_vector(15 downto 0);
 
 
 
                           constant destinationId : std_logic_vector(15 downto 0);
 
 
 
                           constant payload : RioPayload) is
 
 
 
      variable frame : RioFrame;
 
 
 
    begin
 
 
 
      frame := RioFrameCreate(ackId=>"00000", vc=>'0', crf=>'0', prio=>"00",
 
 
 
                              tt=>"01", ftype=>"0000",
 
 
 
                              sourceId=>sourceId, destId=>destinationId,
 
 
 
                              payload=>payload);
 
 
 
 
 
 
 
      frameExpected(portIndex) <= '1';
 
 
 
      frameRead(portIndex) <= frame;
 
 
 
    end procedure;
 
 
 
 
 
 
 
    -- These variabels are needed for the random number generation.
 
    -- These variabels are needed for the random number generation.
 
    variable seed1 : positive := 1;
 
    variable seed1 : positive := 1;
 
    variable seed2: positive := 1;
 
    variable seed2: positive := 1;
 
 
 
 
Line 867... Line 879... 
    PrintS("TG_RioSwitch-TC3");
 
    PrintS("TG_RioSwitch-TC3");
 
    PrintS("Description: Test the routing of normal packets.");
 
    PrintS("Description: Test the routing of normal packets.");
 
    PrintS("Requirement: XXXXX");
 
    PrintS("Requirement: XXXXX");
 
    PrintS("-----------------------------------------------------------------");
 
    PrintS("-----------------------------------------------------------------");
 
    PrintS("Step 1:");
 
    PrintS("Step 1:");
 
    PrintS("Action: Send two packets but not the same time.");
 
    PrintS("Action: Send two packets but not at the same time.");
 
    PrintS("Result: Both packets should be received at the expected ports.");
 
    PrintS("Result: Both packets should be received at the expected ports.");
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    PrintR("TG_RioSwitch-TC3-Step1");
 
    PrintR("TG_RioSwitch-TC3-Step1");
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
 
 
 
 
 
 
    -- Setup the routing table for the following steps.
 
 
 
    RouteSet(x"0000", x"00");
 
 
 
    RouteSet(x"0001", x"00");
 
 
 
    RouteSet(x"0002", x"00");
 
 
 
    RouteSet(x"0003", x"00");
 
 
 
    RouteSet(x"0004", x"01");
 
 
 
    RouteSet(x"0005", x"02");
 
 
 
    RouteSet(x"0006", x"03");
 
 
 
    RouteSetDefault(x"06");
 
 
 
 
 
    -- Frame on port 0 to port 1.
 
    -- Frame on port 0 to port 1.
 
    randomPayload.length := 3;
 
    randomPayload.length := 3;
 
    CreateRandomPayload(randomPayload.data, seed1, seed2);
 
    CreateRandomPayload(randomPayload.data, seed1, seed2);
 
    SendFrame(portIndex=>0,
 
    SendFrame(portIndex=>0,
 
              sourceId=>x"ffff", destinationId=>x"0000", payload=>randomPayload);
 
              sourceId=>x"ffff", destinationId=>x"0004", payload=>randomPayload);
 
    ReceiveFrame(portIndex=>1,
 
    ReceiveFrame(portIndex=>1,
 
                 sourceId=>x"ffff", destinationId=>x"0000", payload=>randomPayload);
 
                 sourceId=>x"ffff", destinationId=>x"0004", payload=>randomPayload);
 
 
 
 
 
    -- Frame on port 1 to port 6.
 
    -- Frame on port 1 to port 6.
 
    randomPayload.length := 4;
 
    randomPayload.length := 4;
 
    CreateRandomPayload(randomPayload.data, seed1, seed2);
 
    CreateRandomPayload(randomPayload.data, seed1, seed2);
 
    SendFrame(portIndex=>1,
 
    SendFrame(portIndex=>1,
Line 902... Line 924... 
    frameExpected(1) <= '0';
 
    frameExpected(1) <= '0';
 
 
 
 
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    PrintS("-----------------------------------------------------------------");
 
    PrintS("-----------------------------------------------------------------");
 
    PrintS("Step 2:");
 
    PrintS("Step 2:");
 
    PrintS("Action: Send two packets to the same port with is full and one to");
 
    PrintS("Action: Send two packets to the same port that is full and one to");
 
    PrintS("        another that is also full. Then receive the packets one at");
 
    PrintS("        another that is also full. Then receive the packets one at");
 
    PrintS("        a time.");
 
    PrintS("        a time.");
 
    PrintS("Result: The packet to the port that is ready should go though.");
 
    PrintS("Result: The packet to the port that is ready should go though.");
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    PrintR("TG_RioSwitch-TC3-Step2");
 
    PrintR("TG_RioSwitch-TC3-Step2");
Line 914... Line 936... 
 
 
 
 
    -- Frame on port 0 to port 1.
 
    -- Frame on port 0 to port 1.
 
    randomPayload.length := 5;
 
    randomPayload.length := 5;
 
    CreateRandomPayload(randomPayload.data, seed1, seed2);
 
    CreateRandomPayload(randomPayload.data, seed1, seed2);
 
    SendFrame(portIndex=>0,
 
    SendFrame(portIndex=>0,
 
              sourceId=>x"ffff", destinationId=>x"0000", payload=>randomPayload);
 
              sourceId=>x"ffff", destinationId=>x"0004", payload=>randomPayload);
 
 
 
 
 
    -- Frame on port 1 to port 6.
 
    -- Frame on port 1 to port 2.
 
    randomPayload1.length := 6;
 
    randomPayload1.length := 6;
 
    CreateRandomPayload(randomPayload1.data, seed1, seed2);
 
    CreateRandomPayload(randomPayload1.data, seed1, seed2);
 
    SendFrame(portIndex=>1,
 
    SendFrame(portIndex=>1,
 
              sourceId=>x"0000", destinationId=>x"ffff", payload=>randomPayload1);
 
              sourceId=>x"0000", destinationId=>x"0005", payload=>randomPayload1);
 
 
 
 
 
    -- Frame on port 2 to port 6.
 
    -- Frame on port 2 to port 2.
 
    randomPayload2.length := 7;
 
    randomPayload2.length := 7;
 
    CreateRandomPayload(randomPayload2.data, seed1, seed2);
 
    CreateRandomPayload(randomPayload2.data, seed1, seed2);
 
    SendFrame(portIndex=>2,
 
    SendFrame(portIndex=>2,
 
              sourceId=>x"0000", destinationId=>x"ffff", payload=>randomPayload2);
 
              sourceId=>x"0000", destinationId=>x"0005", payload=>randomPayload2);
 
 
 
 
 
    wait for 10 us;
 
    wait for 10 us;
 
 
 
 
 
    ReceiveFrame(portIndex=>1,
 
    ReceiveFrame(portIndex=>1,
 
                 sourceId=>x"ffff", destinationId=>x"0000", payload=>randomPayload);
 
                 sourceId=>x"ffff", destinationId=>x"0004", payload=>randomPayload);
 
    wait until frameComplete(0) = '1';
 
    wait until frameComplete(0) = '1';
 
    frameValid(0) <= '0';
 
    frameValid(0) <= '0';
 
    wait until frameReceived(1) = '1';
 
    wait until frameReceived(1) = '1';
 
    frameExpected(1) <= '0';
 
    frameExpected(1) <= '0';
 
 
 
 
 
    wait for 10 us;
 
    wait for 10 us;
 
 
 
 
 
    ReceiveFrame(portIndex=>6,
 
    ReceiveFrame(portIndex=>2,
 
                 sourceId=>x"0000", destinationId=>x"ffff", payload=>randomPayload1);
 
                 sourceId=>x"0000", destinationId=>x"0005", payload=>randomPayload1);
 
    wait until frameComplete(1) = '1';
 
    wait until frameComplete(1) = '1';
 
    frameValid(1) <= '0';
 
    frameValid(1) <= '0';
 
    wait until frameReceived(6) = '1';
 
    wait until frameReceived(2) = '1';
 
    frameExpected(6) <= '0';
 
    frameExpected(2) <= '0';
 
 
 
 
 
    wait for 10 us;
 
    wait for 10 us;
 
 
 
 
 
    ReceiveFrame(portIndex=>6,
 
    ReceiveFrame(portIndex=>2,
 
                 sourceId=>x"0000", destinationId=>x"ffff", payload=>randomPayload2);
 
                 sourceId=>x"0000", destinationId=>x"0005", payload=>randomPayload2);
 
    wait until frameComplete(2) = '1';
 
    wait until frameComplete(2) = '1';
 
    frameValid(2) <= '0';
 
    frameValid(2) <= '0';
 
    wait until frameReceived(6) = '1';
 
    wait until frameReceived(2) = '1';
 
    frameExpected(6) <= '0';
 
    frameExpected(2) <= '0';
 
 
 
 
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
    -- Test completed.
 
    -- Test completed.
 
    ---------------------------------------------------------------------------
 
    ---------------------------------------------------------------------------
 
 
 
 
 
    wait for 10 us;
 
    wait for 10 us;
 
 
 
 
 
    assert readContentEmpty = "1111111"
 
    assert readFrameEmpty = "1111111"
 
      report "Pending frames exist." severity error;
 
      report "Pending frames exist." severity error;
 
 
 
 
 
    TestEnd;
 
    TestEnd;
 
  end process;
 
  end process;
 
 
 
 
Line 1002... Line 1024... 
        frameExpected_i=>frameExpected(portIndex),
 
        frameExpected_i=>frameExpected(portIndex),
 
        frameRead_i=>frameRead(portIndex),
 
        frameRead_i=>frameRead(portIndex),
 
        frameReceived_o=>frameReceived(portIndex),
 
        frameReceived_o=>frameReceived(portIndex),
 
        readFrameEmpty_o=>readFrameEmpty(portIndex),
 
        readFrameEmpty_o=>readFrameEmpty(portIndex),
 
        readFrame_i=>readFrame(portIndex),
 
        readFrame_i=>readFrame(portIndex),
 
        readFrameRestart_i=>readFrameRestart(portIndex),
 
 
 
        readFrameAborted_o=>readFrameAborted(portIndex),
 
 
 
        readContentEmpty_o=>readContentEmpty(portIndex),
 
 
 
        readContent_i=>readContent(portIndex),
 
        readContent_i=>readContent(portIndex),
 
        readContentEnd_o=>readContentEnd(portIndex),
 
        readContentEnd_o=>readContentEnd(portIndex),
 
        readContentData_o=>readContentData(portIndex),
 
        readContentData_o=>readContentData(portIndex),
 
        writeFrameFull_o=>writeFrameFull(portIndex),
 
        writeFrameFull_o=>writeFrameFull(portIndex),
 
        writeFrame_i=>writeFrame(portIndex),
 
        writeFrame_i=>writeFrame(portIndex),
Line 1031... Line 1050... 
      ASSY_VENDOR_IDENTITY=>SWITCH_ASSY_VENDOR_IDENTITY,
 
      ASSY_VENDOR_IDENTITY=>SWITCH_ASSY_VENDOR_IDENTITY,
 
      ASSY_REV=>SWITCH_ASSY_REV)
 
      ASSY_REV=>SWITCH_ASSY_REV)
 
    port map(
 
    port map(
 
      clk=>clk, areset_n=>areset_n,
 
      clk=>clk, areset_n=>areset_n,
 
      writeFrameFull_i=>writeFrameFull,
 
      writeFrameFull_i=>writeFrameFull,
 
      writeFrame_o=>writeFrame, writeFrameAbort_o=>writeFrameAbort,
 
      writeFrame_o=>writeFrame,
 
      writeContent_o=>writeContent, writeContentData_o=>writeContentData,
 
      writeFrameAbort_o=>writeFrameAbort,
 
 
 
      writeContent_o=>writeContent,
 
 
 
      writeContentData_o=>writeContentData,
 
      readFrameEmpty_i=>readFrameEmpty,
 
      readFrameEmpty_i=>readFrameEmpty,
 
      readFrame_o=>readFrame, readFrameRestart_o=>readFrameRestart,
 
      readFrame_o=>readFrame,
 
      readFrameAborted_i=>readFrameAborted,
 
      readContent_o=>readContent,
 
      readContentEmpty_i=>readContentEmpty,
 
      readContentEnd_i=>readContentEnd,
 
      readContent_o=>readContent, readContentEnd_i=>readContentEnd,
 
 
 
      readContentData_i=>readContentData,
 
      readContentData_i=>readContentData,
 
      portLinkTimeout_o=>portLinkTimeout,
 
      portLinkTimeout_o=>portLinkTimeout,
 
      linkInitialized_i=>linkInitialized,
 
      linkInitialized_i=>linkInitialized,
 
      outputPortEnable_o=>outputPortEnable, inputPortEnable_o=>inputPortEnable,
 
      outputPortEnable_o=>outputPortEnable,
 
 
 
      inputPortEnable_o=>inputPortEnable,
 
      localAckIdWrite_o=>localAckIdWrite,
 
      localAckIdWrite_o=>localAckIdWrite,
 
      clrOutstandingAckId_o=>clrOutstandingAckId,
 
      clrOutstandingAckId_o=>clrOutstandingAckId,
 
      inboundAckId_o=>inboundAckIdWrite,
 
      inboundAckId_o=>inboundAckIdWrite,
 
      outstandingAckId_o=>outstandingAckIdWrite,
 
      outstandingAckId_o=>outstandingAckIdWrite,
 
      outboundAckId_o=>outboundAckIdWrite,
 
      outboundAckId_o=>outboundAckIdWrite,
Line 1059... Line 1080... 
end architecture;
 
end architecture;
 
 
 
 
 
 
 
 
 
 
 
 
 
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
 
-- 
-- Switch port test stub.
 
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
 
-- REMARK: Add support for testing partially complete frames, cut-through-routing...
 
 
 
library ieee;
 
library ieee;
 
use ieee.std_logic_1164.all;
 
use ieee.std_logic_1164.all;
 
use ieee.numeric_std.all;
 
use ieee.numeric_std.all;
 
library std;
 
library std;
 
use std.textio.all;
 
use std.textio.all;
 
use work.rio_common.all;
 
use work.rio_common.all;
 
 
 
 
 
 
 
 
 
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
 
-- 
-- Entity for TestPort.
 
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
 
entity TestPort is
 
entity TestPort is
 
  port(
 
  port(
 
    clk : in std_logic;
 
    clk : in std_logic;
 
    areset_n : in std_logic;
 
    areset_n : in std_logic;
Line 1088... Line 1108... 
    frameRead_i : in RioFrame;
 
    frameRead_i : in RioFrame;
 
    frameReceived_o : out std_logic;
 
    frameReceived_o : out std_logic;
 
 
 
 
 
    readFrameEmpty_o : out std_logic;
 
    readFrameEmpty_o : out std_logic;
 
    readFrame_i : in std_logic;
 
    readFrame_i : in std_logic;
 
    readFrameRestart_i : in std_logic;
 
 
 
    readFrameAborted_o : out std_logic;
 
 
 
    readContentEmpty_o : out std_logic;
 
 
 
    readContent_i : in std_logic;
 
    readContent_i : in std_logic;
 
    readContentEnd_o : out std_logic;
 
    readContentEnd_o : out std_logic;
 
    readContentData_o : out std_logic_vector(31 downto 0);
 
    readContentData_o : out std_logic_vector(31 downto 0);
 
 
 
 
 
    writeFrameFull_o : out std_logic;
 
    writeFrameFull_o : out std_logic;
Line 1104... Line 1121... 
    writeContentData_i : in std_logic_vector(31 downto 0));
 
    writeContentData_i : in std_logic_vector(31 downto 0));
 
end entity;
 
end entity;
 
 
 
 
 
 
 
 
 
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
 
-- 
-- Architecture for TestPort.
 
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
 
architecture TestPortImpl of TestPort is
 
architecture TestPortImpl of TestPort is
 
begin
 
begin
 
 
 
 
 
  -----------------------------------------------------------------------------
 
  -----------------------------------------------------------------------------
 
  -- 
  -- Egress frame receiver.
 
  -----------------------------------------------------------------------------
 
  -----------------------------------------------------------------------------
 
  FrameReader: process
 
  FrameReader: process
 
    type StateType is (STATE_IDLE, STATE_WRITE);
 
    type StateType is (STATE_IDLE, STATE_WRITE);
 
    variable state : StateType;
 
    variable state : StateType;
 
    variable frameIndex : natural range 0 to 69;
 
    variable frameIndex : natural range 0 to 69;
Line 1187... Line 1204... 
      end case;
 
      end case;
 
    end loop;
 
    end loop;
 
  end process;
 
  end process;
 
 
 
 
 
  -----------------------------------------------------------------------------
 
  -----------------------------------------------------------------------------
 
  -- 
  -- Ingress frame sender.
 
  -----------------------------------------------------------------------------
 
  -----------------------------------------------------------------------------
 
  -- REMARK: add support for these signals...
 
 
 
  -- readFrameEmpty_i : in std_logic;
 
 
 
  -- readFrameAborted_i : in std_logic;
 
 
 
  FrameSender: process
 
  FrameSender: process
 
    type StateType is (STATE_IDLE, STATE_READ);
 
    type StateType is (STATE_IDLE, STATE_READ);
 
    variable state : StateType;
 
    variable state : StateType;
 
    variable frameIndex : natural range 0 to 69;
 
    variable frameIndex : natural range 0 to 69;
 
  begin
 
  begin
 
    readFrameEmpty_o <= '1';
 
    readFrameEmpty_o <= '1';
 
    readFrameAborted_o <= '0';
 
 
 
    readContentEmpty_o <= '1';
 
 
 
    readContentEnd_o <= '1';
 
    readContentEnd_o <= '1';
 
    readContentData_o <= (others => 'U');
 
    readContentData_o <= (others => 'U');
 
    frameComplete_o <= '0';
 
    frameComplete_o <= '0';
 
    wait until areset_n = '1';
 
    wait until areset_n = '1';
 
 
 
 
Line 1217... Line 1229... 
        when STATE_IDLE =>
 
        when STATE_IDLE =>
 
          frameComplete_o <= '0';
 
          frameComplete_o <= '0';
 
          if (frameValid_i = '1') then
 
          if (frameValid_i = '1') then
 
            state := STATE_READ;
 
            state := STATE_READ;
 
            frameIndex := 0;
 
            frameIndex := 0;
 
            readContentEmpty_o <= '0';
 
 
 
            readFrameEmpty_o <= '0';
 
            readFrameEmpty_o <= '0';
 
          else
 
 
 
            readContentEmpty_o <= '1';
 
 
 
          end if;
 
          end if;
 
 
 
 
 
        when STATE_READ =>
 
        when STATE_READ =>
 
          if (readFrameRestart_i = '1') then
 
 
 
            readContentEnd_o <= '0';
 
 
 
            frameIndex := 0;
 
 
 
          else
 
 
 
            -- Not restarting a frame.
 
 
 
          end if;
 
 
 
 
 
 
 
          if (readContent_i = '1') then
 
          if (readContent_i = '1') then
 
            if (frameIndex < frameWrite_i.length) then
 
            if (frameIndex < frameWrite_i.length) then
 
              readContentData_o <= frameWrite_i.payload(frameIndex);
 
              readContentData_o <= frameWrite_i.payload(frameIndex);
 
              readContentEnd_o <= '0';
 
              readContentEnd_o <= '0';
 
              frameIndex := frameIndex + 1;
 
              frameIndex := frameIndex + 1;
Line 1250... Line 1252... 
          if (readFrame_i = '1') then
 
          if (readFrame_i = '1') then
 
            state := STATE_IDLE;
 
            state := STATE_IDLE;
 
            assert frameIndex = frameWrite_i.length report "Unread frame data discarded." severity error;
 
            assert frameIndex = frameWrite_i.length report "Unread frame data discarded." severity error;
 
            frameComplete_o <= '1';
 
            frameComplete_o <= '1';
 
            readFrameEmpty_o <= '1';
 
            readFrameEmpty_o <= '1';
 
            readContentEmpty_o <= '1';
 
 
 
            readContentData_o <= (others => 'U');
 
            readContentData_o <= (others => 'U');
 
          else
 
          else
 
            -- Not reading a frame.
 
            -- Not reading a frame.
 
          end if;
 
          end if;
 
 
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.