Subversion Repositories sdcard_mass_storage_controller

// ==========================================================================

// CRC Generation Unit - Linear Feedback Shift Register implementation

// (c) Kay Gorontzi, GHSi.de, distributed under the terms of LGPL

// https://www.ghsi.de/CRC/index.php?

// =========================================================================

module CRC_16(BITVAL, Enable, CLK, RST, CRC);

 input        BITVAL;// Next input bit

   input Enable;

   input        CLK;                           // Current bit valid (Clock)

   input        RST;                             // Init CRC value

   output reg [15:0] CRC;                               // Current output CRC value

                     // We need output registers

   wire         inv;

   assign inv = BITVAL ^ CRC[15];                   // XOR required?

  always @(posedge CLK or posedge RST) begin

                if (RST) begin

                        CRC = 0;

        end

      else begin

        if (Enable==1) begin

         CRC[15] = CRC[14];

         CRC[14] = CRC[13];

         CRC[13] = CRC[12];

         CRC[12] = CRC[11] ^ inv;

         CRC[11] = CRC[10];

         CRC[10] = CRC[9];

         CRC[9] = CRC[8];

         CRC[8] = CRC[7];

         CRC[7] = CRC[6];

         CRC[6] = CRC[5];

         CRC[5] = CRC[4] ^ inv;

         CRC[4] = CRC[3];

         CRC[3] = CRC[2];

         CRC[2] = CRC[1];

         CRC[1] = CRC[0];

         CRC[0] = inv;

        end

         end

      end

endmodule